*** Settings *** Documentation Module to test IPMI asset tag functionality. Resource ../lib/ipmi_client.robot Resource ../lib/openbmc_ffdc.robot Variables ../data/ipmi_raw_cmd_table.py Variables ../data/ipmi_variable.py Library ../lib/bmc_network_utils.py Library ../lib/ipmi_utils.py Test Teardown FFDC On Test Case Fail *** Test Cases *** Verify Get DCMI Capabilities [Documentation] Verify get DCMI capabilities command output. [Tags] Verify_Get_DCMI_Capabilities ${cmd_output}= Run IPMI Standard Command dcmi discover @{supported_capabilities}= Create List # Supported DCMI capabilities: ... Mandatory platform capabilties ... Optional platform capabilties ... Power management available ... Managebility access capabilties ... In-band KCS channel available # Mandatory platform attributes: ... 200 SEL entries ... SEL automatic rollover is enabled # Optional Platform Attributes: ... Slave address of device: 0h (8bits)(Satellite/External controller) ... Channel number is 0h (Primary BMC) ... Device revision is 0 # Manageability Access Attributes: ... Primary LAN channel number: 1 is available ... Secondary LAN channel is not available for OOB ... No serial channel is available FOR ${capability} IN @{supported_capabilities} Should Contain ${cmd_output} ${capability} ignore_case=True ... msg=Supported DCMI capabilities not present. END Test Get Self Test Results via IPMI Raw Command [Documentation] Get self test results via IPMI raw command and verify the output. [Tags] Test_Get_Self_Test_Results_via_IPMI ${resp}= Run IPMI Standard Command raw ${IPMI_RAW_CMD['Self_Test_Results']['Get'][0]} # 55h = No error. All Self Tests Passed. # 56h = Self Test function not implemented in this controller. Should Contain Any ${resp} 55 00 56 00 Test Get Device GUID Via IPMI Raw Command [Documentation] Get device GUID via IPMI raw command and verify it using Redfish. [Tags] Test_Get_Device_GUID_via_IPMI_and_Verify_via_Redfish [Teardown] Run Keywords Redfish.Logout AND FFDC On Test Case Fail # Get GUIDS via IPMI. # This should match the /redfish/v1/Managers/bmc's UUID data. ${guids}= Run IPMI Standard Command raw ${IPMI_RAW_CMD['Device GUID']['Get'][0]} # Reverse the order and remove space delims. ${guids}= Split String ${guids} Reverse List ${guids} ${guids}= Evaluate "".join(${guids}) Redfish.Login ${uuid}= Redfish.Get Attribute /redfish/v1/Managers/bmc UUID ${uuid}= Remove String ${uuid} - Rprint Vars guids uuid Valid Value uuid ['${guids}'] Verify Get Channel Info via IPMI [Documentation] Verify get channel info via IPMI. [Tags] Verify_Get_Channel_Info_via_IPMI # Get channel info via ipmi command "ipmitool channel info [channel number]". # Verify channel info with files "channel_access_volatile.json", "channel_access_nv.json" # and "channel_config.json" in BMC. # Example output from 'Get Channel Info': # channel_info: # [channel_0x2_info]: # [channel_medium_type]: 802.3 LAN # [channel_protocol_type]: IPMB-1.0 # [session_support]: multi-session # [active_session_count]: 0 # [protocol_vendor_id]: 7154 # [volatile(active)_settings]: # [alerting]: enabled # [per-message_auth]: enabled # [user_level_auth]: enabled # [access_mode]: always available # [Non-Volatile Settings]: # [alerting]: enabled # [per-message_auth]: enabled # [user_level_auth]: enabled # [access_mode]: always available ${channel_info_ipmi}= Get Channel Info ${CHANNEL_NUMBER} ${active_channel_config}= Get Active Channel Config ${channel_volatile_data_config}= Get Channel Access Config /run/ipmi/channel_access_volatile.json ${channel_nv_data_config}= Get Channel Access Config /var/lib/ipmi/channel_access_nv.json Rprint Vars channel_info_ipmi active_channel_config channel_volatile_data_config channel_nv_data_config Valid Value medium_type_ipmi_conf_map['${channel_info_ipmi['channel_0x${CHANNEL_NUMBER}_info']['channel_medium_type']}'] ... ['${active_channel_config['${CHANNEL_NUMBER}']['channel_info']['medium_type']}'] Valid Value protocol_type_ipmi_conf_map['${channel_info_ipmi['channel_0x${CHANNEL_NUMBER}_info']['channel_protocol_type']}'] ... ['${active_channel_config['${CHANNEL_NUMBER}']['channel_info']['protocol_type']}'] Valid Value channel_info_ipmi['channel_0x${CHANNEL_NUMBER}_info']['session_support'] ... ['${active_channel_config['${CHANNEL_NUMBER}']['channel_info']['session_supported']}'] Valid Value channel_info_ipmi['channel_0x${CHANNEL_NUMBER}_info']['active_session_count'] ... ['${active_channel_config['${CHANNEL_NUMBER}']['active_sessions']}'] # IPMI Spec: The IPMI Enterprise Number is: 7154 (decimal) Valid Value channel_info_ipmi['channel_0x${CHANNEL_NUMBER}_info']['protocol_vendor_id'] ['7154'] # Verify volatile(active)_settings Valid Value disabled_ipmi_conf_map['${channel_info_ipmi['volatile(active)_settings']['alerting']}'] ... ['${channel_volatile_data_config['${CHANNEL_NUMBER}']['alerting_disabled']}'] Valid Value disabled_ipmi_conf_map['${channel_info_ipmi['volatile(active)_settings']['per-message_auth']}'] ... ['${channel_volatile_data_config['${CHANNEL_NUMBER}']['per_msg_auth_disabled']}'] Valid Value disabled_ipmi_conf_map['${channel_info_ipmi['volatile(active)_settings']['user_level_auth']}'] ... ['${channel_volatile_data_config['${CHANNEL_NUMBER}']['user_auth_disabled']}'] Valid Value access_mode_ipmi_conf_map['${channel_info_ipmi['volatile(active)_settings']['access_mode']}'] ... ['${channel_volatile_data_config['${CHANNEL_NUMBER}']['access_mode']}'] # Verify Non-Volatile Settings Valid Value disabled_ipmi_conf_map['${channel_info_ipmi['non-volatile_settings']['alerting']}'] ... ['${channel_nv_data_config['${CHANNEL_NUMBER}']['alerting_disabled']}'] Valid Value disabled_ipmi_conf_map['${channel_info_ipmi['non-volatile_settings']['per-message_auth']}'] ... ['${channel_nv_data_config['${CHANNEL_NUMBER}']['per_msg_auth_disabled']}'] Valid Value disabled_ipmi_conf_map['${channel_info_ipmi['non-volatile_settings']['user_level_auth']}'] ... ['${channel_nv_data_config['${CHANNEL_NUMBER}']['user_auth_disabled']}'] Valid Value access_mode_ipmi_conf_map['${channel_info_ipmi['non-volatile_settings']['access_mode']}'] ... ['${channel_nv_data_config['${CHANNEL_NUMBER}']['access_mode']}'] Test Get Channel Authentication Capabilities via IPMI [Documentation] Test get channel authentication capabilities via IPMI. [Tags] Test_Get_Channel_Authentication_Capabilities_via_IPMI ${channel_auth_cap}= Get Channel Auth Capabilities ${CHANNEL_NUMBER} Rprint Vars channel_auth_cap Valid Value channel_auth_cap['channel_number'] ['${CHANNEL_NUMBER}'] Valid Value channel_auth_cap['kg_status'] ['default (all zeroes)'] Valid Value channel_auth_cap['per_message_authentication'] ['enabled'] Valid Value channel_auth_cap['user_level_authentication'] ['enabled'] Valid Value channel_auth_cap['non-null_user_names_exist'] ['yes'] Valid Value channel_auth_cap['null_user_names_exist'] ['no'] Valid Value channel_auth_cap['anonymous_login_enabled'] ['no'] Valid Value channel_auth_cap['channel_supports_ipmi_v1.5'] ['no'] Valid Value channel_auth_cap['channel_supports_ipmi_v2.0'] ['yes'] Verify Set Session Privilege Level via IPMI Raw Command [Documentation] Set session privilege with given privilege level and verify the response with ... expected level. [Tags] Verify_Set_Session_Privilege_Level_via_IPMI_Raw_Command [Template] Set Session Privilege Level And Verify # privilege_level expected_level 0x00 04 0x02 02 0x03 03 0x04 04 Verify Set Invalid Session Privilege Level via IPMI Raw Command [Documentation] Verify set invalid session privilege level via IPMI raw command. [Tags] Verify_Set_Invalid_Session_Privilege_Level_Via_IPMI_Raw_Command [Template] Set Invalid Session Privilege Level And Verify # invalid_privilege_level 0x05 0x06 0x07 0x0F Verify Close Session via IPMI [Documentation] Verify close session via IPMI. [Tags] Verify_Close_Session_Via_IPMI # The "close session command" can be tested with any out-of-band IPMI command. # When the session is about to close, it will execute the close session command at the end. ${cmd}= Catenate mc info -vvv 2>&1 | grep "Closed Session" ${cmd_output}= Run External IPMI Standard Command ${cmd} Should Contain ${cmd_output} Closed Session *** Keywords *** Set Session Privilege Level And Verify [Documentation] Set session privilege with given privilege level and verify the response with ... expected level. [Arguments] ${privilege_level} ${expected_level} # Description of argument(s): # privilege_level Requested Privilege Level. # expected_level New Privilege Level (or present level if ‘return present privilege level’ was selected). ${resp}= Run IPMI Command ... 0x06 0x3b ${privilege_level} Should Contain ${resp} ${expected_level} Set Invalid Session Privilege Level And Verify [Documentation] Set invalid session privilege level and verify the response. [Arguments] ${privilege_level} # Description of argument(s): # privilege_level Requested Privilege Level. # Verify requested level exceeds Channel and/or User Privilege Limit. ${msg}= Run Keyword And Expect Error * Run IPMI Command ... 0x06 0x3b ${privilege_level} Should Contain ${msg} Unknown rsp=0x81