1#!/bin/bash
2# SPDX-License-Identifier: GPL-2.0
3
4# +-----------------------+                          +------------------------+
5# | H1 (vrf)              |                          | H2 (vrf)               |
6# |  + $h1.10             |                          |  + $h2.10              |
7# |  | 192.0.2.1/28       |                          |  | 192.0.2.2/28        |
8# |  |                    |                          |  |                     |
9# |  | + $h1.20           |                          |  | + $h2.20            |
10# |  \ | 198.51.100.1/24  |                          |  \ | 198.51.100.2/24   |
11# |   \|                  |                          |   \|                   |
12# |    + $h1              |                          |    + $h2               |
13# +----|------------------+                          +----|-------------------+
14#      |                                                  |
15# +----|--------------------------------------------------|-------------------+
16# | SW |                                                  |                   |
17# | +--|--------------------------------------------------|-----------------+ |
18# | |  + $swp1                   BR1 (802.1q)             + $swp2           | |
19# | |     vid 10                                             vid 10         | |
20# | |     vid 20                                             vid 20         | |
21# | |                                                                       | |
22# | |  + vx10 (vxlan)                        + vx20 (vxlan)                 | |
23# | |    local 192.0.2.17                      local 192.0.2.17             | |
24# | |    remote 192.0.2.34 192.0.2.50          remote 192.0.2.34 192.0.2.50 | |
25# | |    id 1000 dstport $VXPORT               id 2000 dstport $VXPORT      | |
26# | |    vid 10 pvid untagged                  vid 20 pvid untagged         | |
27# | +-----------------------------------------------------------------------+ |
28# |                                                                           |
29# |  192.0.2.32/28 via 192.0.2.18                                             |
30# |  192.0.2.48/28 via 192.0.2.18                                             |
31# |                                                                           |
32# |    + $rp1                                                                 |
33# |    | 192.0.2.17/28                                                        |
34# +----|----------------------------------------------------------------------+
35#      |
36# +----|--------------------------------------------------------+
37# |    |                                             VRP2 (vrf) |
38# |    + $rp2                                                   |
39# |      192.0.2.18/28                                          |
40# |                                                             |   (maybe) HW
41# =============================================================================
42# |                                                             |  (likely) SW
43# |    + v1 (veth)                             + v3 (veth)      |
44# |    | 192.0.2.33/28                         | 192.0.2.49/28  |
45# +----|---------------------------------------|----------------+
46#      |                                       |
47# +----|------------------------------+   +----|------------------------------+
48# |    + v2 (veth)        NS1 (netns) |   |    + v4 (veth)        NS2 (netns) |
49# |      192.0.2.34/28                |   |      192.0.2.50/28                |
50# |                                   |   |                                   |
51# |   192.0.2.16/28 via 192.0.2.33    |   |   192.0.2.16/28 via 192.0.2.49    |
52# |   192.0.2.50/32 via 192.0.2.33    |   |   192.0.2.34/32 via 192.0.2.49    |
53# |                                   |   |                                   |
54# | +-------------------------------+ |   | +-------------------------------+ |
55# | |                  BR2 (802.1q) | |   | |                  BR2 (802.1q) | |
56# | |  + vx10 (vxlan)               | |   | |  + vx10 (vxlan)               | |
57# | |    local 192.0.2.34           | |   | |    local 192.0.2.50           | |
58# | |    remote 192.0.2.17          | |   | |    remote 192.0.2.17          | |
59# | |    remote 192.0.2.50          | |   | |    remote 192.0.2.34          | |
60# | |    id 1000 dstport $VXPORT    | |   | |    id 1000 dstport $VXPORT    | |
61# | |    vid 10 pvid untagged       | |   | |    vid 10 pvid untagged       | |
62# | |                               | |   | |                               | |
63# | |  + vx20 (vxlan)               | |   | |  + vx20 (vxlan)               | |
64# | |    local 192.0.2.34           | |   | |    local 192.0.2.50           | |
65# | |    remote 192.0.2.17          | |   | |    remote 192.0.2.17          | |
66# | |    remote 192.0.2.50          | |   | |    remote 192.0.2.34          | |
67# | |    id 2000 dstport $VXPORT    | |   | |    id 2000 dstport $VXPORT    | |
68# | |    vid 20 pvid untagged       | |   | |    vid 20 pvid untagged       | |
69# | |                               | |   | |                               | |
70# | |  + w1 (veth)                  | |   | |  + w1 (veth)                  | |
71# | |  | vid 10                     | |   | |  | vid 10                     | |
72# | |  | vid 20                     | |   | |  | vid 20                     | |
73# | +--|----------------------------+ |   | +--|----------------------------+ |
74# |    |                              |   |    |                              |
75# | +--|----------------------------+ |   | +--|----------------------------+ |
76# | |  + w2 (veth)        VW2 (vrf) | |   | |  + w2 (veth)        VW2 (vrf) | |
77# | |  |\                           | |   | |  |\                           | |
78# | |  | + w2.10                    | |   | |  | + w2.10                    | |
79# | |  |   192.0.2.3/28             | |   | |  |   192.0.2.4/28             | |
80# | |  |                            | |   | |  |                            | |
81# | |  + w2.20                      | |   | |  + w2.20                      | |
82# | |    198.51.100.3/24            | |   | |    198.51.100.4/24            | |
83# | +-------------------------------+ |   | +-------------------------------+ |
84# +-----------------------------------+   +-----------------------------------+
85
86: ${VXPORT:=4789}
87export VXPORT
88
89: ${ALL_TESTS:="
90	ping_ipv4
91	test_flood
92	test_unicast
93	reapply_config
94	ping_ipv4
95	test_flood
96	test_unicast
97	test_learning
98	test_pvid
99    "}
100
101NUM_NETIFS=6
102source lib.sh
103
104h1_create()
105{
106	simple_if_init $h1
107	tc qdisc add dev $h1 clsact
108	vlan_create $h1 10 v$h1 192.0.2.1/28
109	vlan_create $h1 20 v$h1 198.51.100.1/24
110}
111
112h1_destroy()
113{
114	vlan_destroy $h1 20
115	vlan_destroy $h1 10
116	tc qdisc del dev $h1 clsact
117	simple_if_fini $h1
118}
119
120h2_create()
121{
122	simple_if_init $h2
123	tc qdisc add dev $h2 clsact
124	vlan_create $h2 10 v$h2 192.0.2.2/28
125	vlan_create $h2 20 v$h2 198.51.100.2/24
126}
127
128h2_destroy()
129{
130	vlan_destroy $h2 20
131	vlan_destroy $h2 10
132	tc qdisc del dev $h2 clsact
133	simple_if_fini $h2
134}
135
136rp1_set_addr()
137{
138	ip address add dev $rp1 192.0.2.17/28
139
140	ip route add 192.0.2.32/28 nexthop via 192.0.2.18
141	ip route add 192.0.2.48/28 nexthop via 192.0.2.18
142}
143
144rp1_unset_addr()
145{
146	ip route del 192.0.2.48/28 nexthop via 192.0.2.18
147	ip route del 192.0.2.32/28 nexthop via 192.0.2.18
148
149	ip address del dev $rp1 192.0.2.17/28
150}
151
152switch_create()
153{
154	ip link add name br1 type bridge vlan_filtering 1 vlan_default_pvid 0 \
155		mcast_snooping 0
156	# Make sure the bridge uses the MAC address of the local port and not
157	# that of the VxLAN's device.
158	ip link set dev br1 address $(mac_get $swp1)
159	ip link set dev br1 up
160
161	ip link set dev $rp1 up
162	rp1_set_addr
163
164	ip link add name vx10 type vxlan id 1000	\
165		local 192.0.2.17 dstport "$VXPORT"	\
166		nolearning noudpcsum tos inherit ttl 100
167	ip link set dev vx10 up
168
169	ip link set dev vx10 master br1
170	bridge vlan add vid 10 dev vx10 pvid untagged
171
172	ip link add name vx20 type vxlan id 2000	\
173		local 192.0.2.17 dstport "$VXPORT"	\
174		nolearning noudpcsum tos inherit ttl 100
175	ip link set dev vx20 up
176
177	ip link set dev vx20 master br1
178	bridge vlan add vid 20 dev vx20 pvid untagged
179
180	ip link set dev $swp1 master br1
181	ip link set dev $swp1 up
182	bridge vlan add vid 10 dev $swp1
183	bridge vlan add vid 20 dev $swp1
184
185	ip link set dev $swp2 master br1
186	ip link set dev $swp2 up
187	bridge vlan add vid 10 dev $swp2
188	bridge vlan add vid 20 dev $swp2
189
190	bridge fdb append dev vx10 00:00:00:00:00:00 dst 192.0.2.34 self
191	bridge fdb append dev vx10 00:00:00:00:00:00 dst 192.0.2.50 self
192
193	bridge fdb append dev vx20 00:00:00:00:00:00 dst 192.0.2.34 self
194	bridge fdb append dev vx20 00:00:00:00:00:00 dst 192.0.2.50 self
195}
196
197switch_destroy()
198{
199	bridge fdb del dev vx20 00:00:00:00:00:00 dst 192.0.2.50 self
200	bridge fdb del dev vx20 00:00:00:00:00:00 dst 192.0.2.34 self
201
202	bridge fdb del dev vx10 00:00:00:00:00:00 dst 192.0.2.50 self
203	bridge fdb del dev vx10 00:00:00:00:00:00 dst 192.0.2.34 self
204
205	bridge vlan del vid 20 dev $swp2
206	bridge vlan del vid 10 dev $swp2
207	ip link set dev $swp2 down
208	ip link set dev $swp2 nomaster
209
210	bridge vlan del vid 20 dev $swp1
211	bridge vlan del vid 10 dev $swp1
212	ip link set dev $swp1 down
213	ip link set dev $swp1 nomaster
214
215	bridge vlan del vid 20 dev vx20
216	ip link set dev vx20 nomaster
217
218	ip link set dev vx20 down
219	ip link del dev vx20
220
221	bridge vlan del vid 10 dev vx10
222	ip link set dev vx10 nomaster
223
224	ip link set dev vx10 down
225	ip link del dev vx10
226
227	rp1_unset_addr
228	ip link set dev $rp1 down
229
230	ip link set dev br1 down
231	ip link del dev br1
232}
233
234vrp2_create()
235{
236	simple_if_init $rp2 192.0.2.18/28
237	__simple_if_init v1 v$rp2 192.0.2.33/28
238	__simple_if_init v3 v$rp2 192.0.2.49/28
239	tc qdisc add dev v1 clsact
240}
241
242vrp2_destroy()
243{
244	tc qdisc del dev v1 clsact
245	__simple_if_fini v3 192.0.2.49/28
246	__simple_if_fini v1 192.0.2.33/28
247	simple_if_fini $rp2 192.0.2.18/28
248}
249
250ns_init_common()
251{
252	local in_if=$1; shift
253	local in_addr=$1; shift
254	local other_in_addr=$1; shift
255	local nh_addr=$1; shift
256	local host_addr1=$1; shift
257	local host_addr2=$1; shift
258
259	ip link set dev $in_if up
260	ip address add dev $in_if $in_addr/28
261	tc qdisc add dev $in_if clsact
262
263	ip link add name br2 type bridge vlan_filtering 1 vlan_default_pvid 0
264	ip link set dev br2 up
265
266	ip link add name w1 type veth peer name w2
267
268	ip link set dev w1 master br2
269	ip link set dev w1 up
270
271	bridge vlan add vid 10 dev w1
272	bridge vlan add vid 20 dev w1
273
274	ip link add name vx10 type vxlan id 1000 local $in_addr \
275		dstport "$VXPORT"
276	ip link set dev vx10 up
277	bridge fdb append dev vx10 00:00:00:00:00:00 dst 192.0.2.17 self
278	bridge fdb append dev vx10 00:00:00:00:00:00 dst $other_in_addr self
279
280	ip link set dev vx10 master br2
281	tc qdisc add dev vx10 clsact
282
283	bridge vlan add vid 10 dev vx10 pvid untagged
284
285	ip link add name vx20 type vxlan id 2000 local $in_addr \
286		dstport "$VXPORT"
287	ip link set dev vx20 up
288	bridge fdb append dev vx20 00:00:00:00:00:00 dst 192.0.2.17 self
289	bridge fdb append dev vx20 00:00:00:00:00:00 dst $other_in_addr self
290
291	ip link set dev vx20 master br2
292	tc qdisc add dev vx20 clsact
293
294	bridge vlan add vid 20 dev vx20 pvid untagged
295
296	simple_if_init w2
297        vlan_create w2 10 vw2 $host_addr1/28
298        vlan_create w2 20 vw2 $host_addr2/24
299
300	ip route add 192.0.2.16/28 nexthop via $nh_addr
301	ip route add $other_in_addr/32 nexthop via $nh_addr
302}
303export -f ns_init_common
304
305ns1_create()
306{
307	ip netns add ns1
308	ip link set dev v2 netns ns1
309	in_ns ns1 \
310	      ns_init_common v2 192.0.2.34 192.0.2.50 192.0.2.33 192.0.2.3 \
311	      198.51.100.3
312}
313
314ns1_destroy()
315{
316	ip netns exec ns1 ip link set dev v2 netns 1
317	ip netns del ns1
318}
319
320ns2_create()
321{
322	ip netns add ns2
323	ip link set dev v4 netns ns2
324	in_ns ns2 \
325	      ns_init_common v4 192.0.2.50 192.0.2.34 192.0.2.49 192.0.2.4 \
326	      198.51.100.4
327}
328
329ns2_destroy()
330{
331	ip netns exec ns2 ip link set dev v4 netns 1
332	ip netns del ns2
333}
334
335setup_prepare()
336{
337	h1=${NETIFS[p1]}
338	swp1=${NETIFS[p2]}
339
340	swp2=${NETIFS[p3]}
341	h2=${NETIFS[p4]}
342
343	rp1=${NETIFS[p5]}
344	rp2=${NETIFS[p6]}
345
346	vrf_prepare
347	forwarding_enable
348
349	h1_create
350	h2_create
351	switch_create
352
353	ip link add name v1 type veth peer name v2
354	ip link add name v3 type veth peer name v4
355	vrp2_create
356	ns1_create
357	ns2_create
358
359	r1_mac=$(in_ns ns1 mac_get w2)
360	r2_mac=$(in_ns ns2 mac_get w2)
361	h2_mac=$(mac_get $h2)
362}
363
364cleanup()
365{
366	pre_cleanup
367
368	ns2_destroy
369	ns1_destroy
370	vrp2_destroy
371	ip link del dev v3
372	ip link del dev v1
373
374	switch_destroy
375	h2_destroy
376	h1_destroy
377
378	forwarding_restore
379	vrf_cleanup
380}
381
382# For the first round of tests, vx10 and vx20 were the first devices to get
383# attached to the bridge, and that at the point that the local IP is already
384# configured. Try the other scenario of attaching these devices to a bridge
385# that already has local ports members, and only then assign the local IP.
386reapply_config()
387{
388	log_info "Reapplying configuration"
389
390	bridge fdb del dev vx20 00:00:00:00:00:00 dst 192.0.2.50 self
391	bridge fdb del dev vx20 00:00:00:00:00:00 dst 192.0.2.34 self
392
393	bridge fdb del dev vx10 00:00:00:00:00:00 dst 192.0.2.50 self
394	bridge fdb del dev vx10 00:00:00:00:00:00 dst 192.0.2.34 self
395
396	ip link set dev vx20 nomaster
397	ip link set dev vx10 nomaster
398
399	rp1_unset_addr
400	sleep 5
401
402	ip link set dev vx10 master br1
403	bridge vlan add vid 10 dev vx10 pvid untagged
404
405	ip link set dev vx20 master br1
406	bridge vlan add vid 20 dev vx20 pvid untagged
407
408	bridge fdb append dev vx10 00:00:00:00:00:00 dst 192.0.2.34 self
409	bridge fdb append dev vx10 00:00:00:00:00:00 dst 192.0.2.50 self
410
411	bridge fdb append dev vx20 00:00:00:00:00:00 dst 192.0.2.34 self
412	bridge fdb append dev vx20 00:00:00:00:00:00 dst 192.0.2.50 self
413
414	rp1_set_addr
415	sleep 5
416}
417
418ping_ipv4()
419{
420	ping_test $h1.10 192.0.2.2 ": local->local vid 10"
421	ping_test $h1.20 198.51.100.2 ": local->local vid 20"
422	ping_test $h1.10 192.0.2.3 ": local->remote 1 vid 10"
423	ping_test $h1.10 192.0.2.4 ": local->remote 2 vid 10"
424	ping_test $h1.20 198.51.100.3 ": local->remote 1 vid 20"
425	ping_test $h1.20 198.51.100.4 ": local->remote 2 vid 20"
426}
427
428maybe_in_ns()
429{
430	echo ${1:+in_ns} $1
431}
432
433__flood_counter_add_del()
434{
435	local add_del=$1; shift
436	local dev=$1; shift
437	local ns=$1; shift
438
439	# Putting the ICMP capture both to HW and to SW will end up
440	# double-counting the packets that are trapped to slow path, such as for
441	# the unicast test. Adding either skip_hw or skip_sw fixes this problem,
442	# but with skip_hw, the flooded packets are not counted at all, because
443	# those are dropped due to MAC address mismatch; and skip_sw is a no-go
444	# for veth-based topologies.
445	#
446	# So try to install with skip_sw and fall back to skip_sw if that fails.
447
448	$(maybe_in_ns $ns) __icmp_capture_add_del          \
449			   $add_del 100 "" $dev skip_sw 2>/dev/null || \
450	$(maybe_in_ns $ns) __icmp_capture_add_del          \
451			   $add_del 100 "" $dev skip_hw
452}
453
454flood_counter_install()
455{
456	__flood_counter_add_del add "$@"
457}
458
459flood_counter_uninstall()
460{
461	__flood_counter_add_del del "$@"
462}
463
464flood_fetch_stat()
465{
466	local dev=$1; shift
467	local ns=$1; shift
468
469	$(maybe_in_ns $ns) tc_rule_stats_get $dev 100 ingress
470}
471
472flood_fetch_stats()
473{
474	local counters=("${@}")
475	local counter
476
477	for counter in "${counters[@]}"; do
478		flood_fetch_stat $counter
479	done
480}
481
482vxlan_flood_test()
483{
484	local mac=$1; shift
485	local dst=$1; shift
486	local vid=$1; shift
487	local -a expects=("${@}")
488
489	local -a counters=($h2 "vx10 ns1" "vx20 ns1" "vx10 ns2" "vx20 ns2")
490	local counter
491	local key
492
493	# Packets reach the local host tagged whereas they reach the VxLAN
494	# devices untagged. In order to be able to use the same filter for
495	# all counters, make sure the packets also reach the local host
496	# untagged
497	bridge vlan add vid $vid dev $swp2 untagged
498	for counter in "${counters[@]}"; do
499		flood_counter_install $counter
500	done
501
502	local -a t0s=($(flood_fetch_stats "${counters[@]}"))
503	$MZ $h1 -Q $vid -c 10 -d 100msec -p 64 -b $mac -B $dst -t icmp -q
504	sleep 1
505	local -a t1s=($(flood_fetch_stats "${counters[@]}"))
506
507	for key in ${!t0s[@]}; do
508		local delta=$((t1s[$key] - t0s[$key]))
509		local expect=${expects[$key]}
510
511		((expect == delta))
512		check_err $? "${counters[$key]}: Expected to capture $expect packets, got $delta."
513	done
514
515	for counter in "${counters[@]}"; do
516		flood_counter_uninstall $counter
517	done
518	bridge vlan add vid $vid dev $swp2
519}
520
521__test_flood()
522{
523	local mac=$1; shift
524	local dst=$1; shift
525	local vid=$1; shift
526	local what=$1; shift
527	local -a expects=("${@}")
528
529	RET=0
530
531	vxlan_flood_test $mac $dst $vid "${expects[@]}"
532
533	log_test "VXLAN: $what"
534}
535
536test_flood()
537{
538	__test_flood de:ad:be:ef:13:37 192.0.2.100 10 "flood vlan 10" \
539		10 10 0 10 0
540	__test_flood ca:fe:be:ef:13:37 198.51.100.100 20 "flood vlan 20" \
541		10 0 10 0 10
542}
543
544vxlan_fdb_add_del()
545{
546	local add_del=$1; shift
547	local vid=$1; shift
548	local mac=$1; shift
549	local dev=$1; shift
550	local dst=$1; shift
551
552	bridge fdb $add_del dev $dev $mac self static permanent \
553		${dst:+dst} $dst 2>/dev/null
554	bridge fdb $add_del dev $dev $mac master static vlan $vid 2>/dev/null
555}
556
557__test_unicast()
558{
559	local mac=$1; shift
560	local dst=$1; shift
561	local hit_idx=$1; shift
562	local vid=$1; shift
563	local what=$1; shift
564
565	RET=0
566
567	local -a expects=(0 0 0 0 0)
568	expects[$hit_idx]=10
569
570	vxlan_flood_test $mac $dst $vid "${expects[@]}"
571
572	log_test "VXLAN: $what"
573}
574
575test_unicast()
576{
577	local -a targets=("$h2_mac $h2"
578			  "$r1_mac vx10 192.0.2.34"
579			  "$r2_mac vx10 192.0.2.50")
580	local target
581
582	log_info "unicast vlan 10"
583
584	for target in "${targets[@]}"; do
585		vxlan_fdb_add_del add 10 $target
586	done
587
588	__test_unicast $h2_mac 192.0.2.2 0 10 "local MAC unicast"
589	__test_unicast $r1_mac 192.0.2.3 1 10 "remote MAC 1 unicast"
590	__test_unicast $r2_mac 192.0.2.4 3 10 "remote MAC 2 unicast"
591
592	for target in "${targets[@]}"; do
593		vxlan_fdb_add_del del 10 $target
594	done
595
596	log_info "unicast vlan 20"
597
598	targets=("$h2_mac $h2" "$r1_mac vx20 192.0.2.34" \
599		 "$r2_mac vx20 192.0.2.50")
600
601	for target in "${targets[@]}"; do
602		vxlan_fdb_add_del add 20 $target
603	done
604
605	__test_unicast $h2_mac 198.51.100.2 0 20 "local MAC unicast"
606	__test_unicast $r1_mac 198.51.100.3 2 20 "remote MAC 1 unicast"
607	__test_unicast $r2_mac 198.51.100.4 4 20 "remote MAC 2 unicast"
608
609	for target in "${targets[@]}"; do
610		vxlan_fdb_add_del del 20 $target
611	done
612}
613
614test_pvid()
615{
616	local -a expects=(0 0 0 0 0)
617	local mac=de:ad:be:ef:13:37
618	local dst=192.0.2.100
619	local vid=10
620
621	# Check that flooding works
622	RET=0
623
624	expects[0]=10; expects[1]=10; expects[3]=10
625	vxlan_flood_test $mac $dst $vid "${expects[@]}"
626
627	log_test "VXLAN: flood before pvid off"
628
629	# Toggle PVID off and test that flood to remote hosts does not work
630	RET=0
631
632	bridge vlan add vid 10 dev vx10
633
634	expects[0]=10; expects[1]=0; expects[3]=0
635	vxlan_flood_test $mac $dst $vid "${expects[@]}"
636
637	log_test "VXLAN: flood after pvid off"
638
639	# Toggle PVID on and test that flood to remote hosts does work
640	RET=0
641
642	bridge vlan add vid 10 dev vx10 pvid untagged
643
644	expects[0]=10; expects[1]=10; expects[3]=10
645	vxlan_flood_test $mac $dst $vid "${expects[@]}"
646
647	log_test "VXLAN: flood after pvid on"
648
649	# Add a new VLAN and test that it does not affect flooding
650	RET=0
651
652	bridge vlan add vid 30 dev vx10
653
654	expects[0]=10; expects[1]=10; expects[3]=10
655	vxlan_flood_test $mac $dst $vid "${expects[@]}"
656
657	bridge vlan del vid 30 dev vx10
658
659	log_test "VXLAN: flood after vlan add"
660
661	# Remove currently mapped VLAN and test that flood to remote hosts does
662	# not work
663	RET=0
664
665	bridge vlan del vid 10 dev vx10
666
667	expects[0]=10; expects[1]=0; expects[3]=0
668	vxlan_flood_test $mac $dst $vid "${expects[@]}"
669
670	log_test "VXLAN: flood after vlan delete"
671
672	# Re-add the VLAN and test that flood to remote hosts does work
673	RET=0
674
675	bridge vlan add vid 10 dev vx10 pvid untagged
676
677	expects[0]=10; expects[1]=10; expects[3]=10
678	vxlan_flood_test $mac $dst $vid "${expects[@]}"
679
680	log_test "VXLAN: flood after vlan re-add"
681}
682
683__test_learning()
684{
685	local -a expects=(0 0 0 0 0)
686	local mac=$1; shift
687	local dst=$1; shift
688	local vid=$1; shift
689	local idx1=$1; shift
690	local idx2=$1; shift
691	local vx=vx$vid
692
693	# Check that flooding works
694	RET=0
695
696	expects[0]=10; expects[$idx1]=10; expects[$idx2]=10
697	vxlan_flood_test $mac $dst $vid "${expects[@]}"
698
699	log_test "VXLAN: flood before learning"
700
701	# Send a packet with source mac set to $mac from host w2 and check that
702	# a corresponding entry is created in the VxLAN device
703	RET=0
704
705	in_ns ns1 $MZ w2 -Q $vid -c 1 -p 64 -a $mac -b ff:ff:ff:ff:ff:ff \
706		-B $dst -t icmp -q
707	sleep 1
708
709	bridge fdb show brport $vx | grep $mac | grep -q self
710	check_err $?
711	bridge fdb show brport $vx | grep $mac | grep "vlan $vid" \
712		| grep -q -v self
713	check_err $?
714
715	log_test "VXLAN: show learned FDB entry"
716
717	# Repeat first test and check that packets only reach host w2 in ns1
718	RET=0
719
720	expects[0]=0; expects[$idx1]=10; expects[$idx2]=0
721	vxlan_flood_test $mac $dst $vid "${expects[@]}"
722
723	log_test "VXLAN: learned FDB entry"
724
725	# Delete the learned FDB entry from the VxLAN and bridge devices and
726	# check that packets are flooded
727	RET=0
728
729	bridge fdb del dev $vx $mac master self vlan $vid
730	sleep 1
731
732	expects[0]=10; expects[$idx1]=10; expects[$idx2]=10
733	vxlan_flood_test $mac $dst $vid "${expects[@]}"
734
735	log_test "VXLAN: deletion of learned FDB entry"
736
737	# Re-learn the first FDB entry and check that it is correctly aged-out
738	RET=0
739
740	in_ns ns1 $MZ w2 -Q $vid -c 1 -p 64 -a $mac -b ff:ff:ff:ff:ff:ff \
741		-B $dst -t icmp -q
742	sleep 1
743
744	bridge fdb show brport $vx | grep $mac | grep -q self
745	check_err $?
746	bridge fdb show brport $vx | grep $mac | grep "vlan $vid" \
747		| grep -q -v self
748	check_err $?
749
750	expects[0]=0; expects[$idx1]=10; expects[$idx2]=0
751	vxlan_flood_test $mac $dst $vid "${expects[@]}"
752
753	sleep 20
754
755	bridge fdb show brport $vx | grep $mac | grep -q self
756	check_fail $?
757	bridge fdb show brport $vx | grep $mac | grep "vlan $vid" \
758		| grep -q -v self
759	check_fail $?
760
761	expects[0]=10; expects[$idx1]=10; expects[$idx2]=10
762	vxlan_flood_test $mac $dst $vid "${expects[@]}"
763
764	log_test "VXLAN: Ageing of learned FDB entry"
765
766	# Toggle learning on the bridge port and check that the bridge's FDB
767	# is populated only when it should
768	RET=0
769
770	ip link set dev $vx type bridge_slave learning off
771
772	in_ns ns1 $MZ w2 -Q $vid -c 1 -p 64 -a $mac -b ff:ff:ff:ff:ff:ff \
773		-B $dst -t icmp -q
774	sleep 1
775
776	bridge fdb show brport $vx | grep $mac | grep "vlan $vid" \
777		| grep -q -v self
778	check_fail $?
779
780	ip link set dev $vx type bridge_slave learning on
781
782	in_ns ns1 $MZ w2 -Q $vid -c 1 -p 64 -a $mac -b ff:ff:ff:ff:ff:ff \
783		-B $dst -t icmp -q
784	sleep 1
785
786	bridge fdb show brport $vx | grep $mac | grep "vlan $vid" \
787		| grep -q -v self
788	check_err $?
789
790	log_test "VXLAN: learning toggling on bridge port"
791}
792
793test_learning()
794{
795	local mac=de:ad:be:ef:13:37
796	local dst=192.0.2.100
797	local vid=10
798
799	# Enable learning on the VxLAN devices and set ageing time to 10 seconds
800	ip link set dev br1 type bridge ageing_time 1000
801	ip link set dev vx10 type vxlan ageing 10
802	ip link set dev vx10 type vxlan learning
803	ip link set dev vx20 type vxlan ageing 10
804	ip link set dev vx20 type vxlan learning
805	reapply_config
806
807	log_info "learning vlan 10"
808
809	__test_learning $mac $dst $vid 1 3
810
811	log_info "learning vlan 20"
812
813	mac=ca:fe:be:ef:13:37
814	dst=198.51.100.100
815	vid=20
816
817	__test_learning $mac $dst $vid 2 4
818
819	# Restore previous settings
820	ip link set dev vx20 type vxlan nolearning
821	ip link set dev vx20 type vxlan ageing 300
822	ip link set dev vx10 type vxlan nolearning
823	ip link set dev vx10 type vxlan ageing 300
824	ip link set dev br1 type bridge ageing_time 30000
825	reapply_config
826}
827
828test_all()
829{
830	log_info "Running tests with UDP port $VXPORT"
831	tests_run
832}
833
834trap cleanup EXIT
835
836setup_prepare
837setup_wait
838test_all
839
840exit $EXIT_STATUS
841