xref: /openbmc/linux/sound/soc/atmel/Kconfig (revision 84b102f5)
1# SPDX-License-Identifier: GPL-2.0-only
2config SND_ATMEL_SOC
3	tristate "SoC Audio for the Atmel System-on-Chip"
4	depends on HAS_IOMEM
5	help
6	  Say Y or M if you want to add support for codecs attached to
7	  the ATMEL SSC interface. You will also need
8	  to select the audio interfaces to support below.
9
10if SND_ATMEL_SOC
11
12config SND_ATMEL_SOC_PDC
13	bool
14	depends on HAS_DMA
15
16config SND_ATMEL_SOC_DMA
17	bool
18	select SND_SOC_GENERIC_DMAENGINE_PCM
19
20config SND_ATMEL_SOC_SSC
21	tristate
22	select SND_ATMEL_SOC_DMA
23	select SND_ATMEL_SOC_PDC
24
25config SND_ATMEL_SOC_SSC_PDC
26	tristate "SoC PCM DAI support for AT91 SSC controller using PDC"
27	depends on ATMEL_SSC
28	select SND_ATMEL_SOC_PDC
29	select SND_ATMEL_SOC_SSC
30	help
31	  Say Y or M if you want to add support for Atmel SSC interface
32	  in PDC mode configured using audio-graph-card in device-tree.
33
34config SND_ATMEL_SOC_SSC_DMA
35	tristate "SoC PCM DAI support for AT91 SSC controller using DMA"
36	depends on ATMEL_SSC
37	select SND_ATMEL_SOC_DMA
38	select SND_ATMEL_SOC_SSC
39	help
40	  Say Y or M if you want to add support for Atmel SSC interface
41	  in DMA mode configured using audio-graph-card in device-tree.
42
43config SND_AT91_SOC_SAM9G20_WM8731
44	tristate "SoC Audio support for WM8731-based At91sam9g20 evaluation board"
45	depends on ARCH_AT91 || COMPILE_TEST
46	depends on ATMEL_SSC && SND_SOC_I2C_AND_SPI
47	select SND_ATMEL_SOC_SSC_PDC
48	select SND_SOC_WM8731
49	help
50	  Say Y if you want to add support for SoC audio on WM8731-based
51	  AT91sam9g20 evaluation board.
52
53config SND_ATMEL_SOC_WM8904
54	tristate "Atmel ASoC driver for boards using WM8904 codec"
55	depends on ARCH_AT91 || COMPILE_TEST
56	depends on ATMEL_SSC && I2C
57	select SND_ATMEL_SOC_SSC_DMA
58	select SND_SOC_WM8904
59	help
60	  Say Y if you want to add support for Atmel ASoC driver for boards using
61	  WM8904 codec.
62
63config SND_AT91_SOC_SAM9X5_WM8731
64	tristate "SoC Audio support for WM8731-based at91sam9x5 board"
65	depends on ARCH_AT91 || COMPILE_TEST
66	depends on ATMEL_SSC && SND_SOC_I2C_AND_SPI
67	select SND_ATMEL_SOC_SSC_DMA
68	select SND_SOC_WM8731
69	help
70	  Say Y if you want to add support for audio SoC on an
71	  at91sam9x5 based board that is using WM8731 codec.
72
73config SND_ATMEL_SOC_CLASSD
74	tristate "Atmel ASoC driver for boards using CLASSD"
75	depends on ARCH_AT91 || COMPILE_TEST
76	select SND_SOC_GENERIC_DMAENGINE_PCM
77	select REGMAP_MMIO
78	help
79	  Say Y if you want to add support for Atmel ASoC driver for boards using
80	  CLASSD.
81
82config SND_ATMEL_SOC_PDMIC
83	tristate "Atmel ASoC driver for boards using PDMIC"
84	depends on OF && (ARCH_AT91 || COMPILE_TEST)
85	select SND_SOC_GENERIC_DMAENGINE_PCM
86	select REGMAP_MMIO
87	help
88	  Say Y if you want to add support for Atmel ASoC driver for boards using
89	  PDMIC.
90
91config SND_ATMEL_SOC_TSE850_PCM5142
92	tristate "ASoC driver for the Axentia TSE-850"
93	depends on ARCH_AT91 && OF
94	depends on ATMEL_SSC && I2C
95	select SND_ATMEL_SOC_SSC_DMA
96	select SND_SOC_PCM512x_I2C
97	help
98	  Say Y if you want to add support for the ASoC driver for the
99	  Axentia TSE-850 with a PCM5142 codec.
100
101config SND_ATMEL_SOC_I2S
102	tristate "Atmel ASoC driver for boards using I2S"
103	depends on OF && (ARCH_AT91 || COMPILE_TEST)
104	select SND_SOC_GENERIC_DMAENGINE_PCM
105	select REGMAP_MMIO
106	help
107	  Say Y or M if you want to add support for Atmel ASoc driver for boards
108	  using I2S.
109
110config SND_SOC_MIKROE_PROTO
111	tristate "Support for Mikroe-PROTO board"
112	depends on OF
113	depends on SND_SOC_I2C_AND_SPI
114	select SND_SOC_WM8731
115	help
116	  Say Y or M if you want to add support for MikroElektronika PROTO Audio
117	  Board. This board contains the WM8731 codec, which can be configured
118	  using I2C over SDA (MPU Data Input) and SCL (MPU Clock Input) pins.
119	  Both playback and capture are supported.
120
121config SND_MCHP_SOC_I2S_MCC
122	tristate "Microchip ASoC driver for boards using I2S MCC"
123	depends on OF && (ARCH_AT91 || COMPILE_TEST)
124	select SND_SOC_GENERIC_DMAENGINE_PCM
125	select REGMAP_MMIO
126	help
127	  Say Y or M if you want to add support for I2S Multi-Channel ASoC
128	  driver on the following Microchip platforms:
129	  - sam9x60
130
131	  The I2SMCC complies with the Inter-IC Sound (I2S) bus specification
132	  and supports a Time Division Multiplexed (TDM) interface with
133	  external multi-channel audio codecs.
134
135config SND_MCHP_SOC_SPDIFTX
136	tristate "Microchip ASoC driver for boards using S/PDIF TX"
137	depends on OF && (ARCH_AT91 || COMPILE_TEST)
138	select SND_SOC_GENERIC_DMAENGINE_PCM
139	select REGMAP_MMIO
140	help
141	  Say Y or M if you want to add support for Microchip S/PDIF TX ASoc
142	  driver on the following Microchip platforms:
143	  - sama7g5
144
145	  This S/PDIF TX driver is compliant with IEC-60958 standard and
146	  includes programmable User Data and Channel Status fields.
147
148config SND_MCHP_SOC_SPDIFRX
149	tristate "Microchip ASoC driver for boards using S/PDIF RX"
150	depends on OF && (ARCH_AT91 || COMPILE_TEST)
151	depends on COMMON_CLK
152	select SND_SOC_GENERIC_DMAENGINE_PCM
153	select REGMAP_MMIO
154	help
155	  Say Y or M if you want to add support for Microchip S/PDIF RX ASoc
156	  driver on the following Microchip platforms:
157	  - sama7g5
158
159	  This S/PDIF RX driver is compliant with IEC-60958 standard and
160	  includes programmable User Data and Channel Status fields.
161endif
162