1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
4 *
5 * EVM Board Schematics: https://www.ti.com/lit/zip/sprr458
6 */
7
8/dts-v1/;
9
10#include <dt-bindings/net/ti-dp83867.h>
11#include <dt-bindings/gpio/gpio.h>
12#include "k3-j784s4.dtsi"
13
14/ {
15	compatible = "ti,j784s4-evm", "ti,j784s4";
16	model = "Texas Instruments J784S4 EVM";
17
18	chosen {
19		stdout-path = "serial2:115200n8";
20	};
21
22	aliases {
23		serial0 = &wkup_uart0;
24		serial1 = &mcu_uart0;
25		serial2 = &main_uart8;
26		mmc0 = &main_sdhci0;
27		mmc1 = &main_sdhci1;
28		i2c0 = &wkup_i2c0;
29		i2c3 = &main_i2c0;
30	};
31
32	memory@80000000 {
33		device_type = "memory";
34		/* 32G RAM */
35		reg = <0x00 0x80000000 0x00 0x80000000>,
36		      <0x08 0x80000000 0x07 0x80000000>;
37	};
38
39	reserved_memory: reserved-memory {
40		#address-cells = <2>;
41		#size-cells = <2>;
42		ranges;
43
44		secure_ddr: optee@9e800000 {
45			reg = <0x00 0x9e800000 0x00 0x01800000>;
46			no-map;
47		};
48
49		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
50			compatible = "shared-dma-pool";
51			reg = <0x00 0xa0000000 0x00 0x100000>;
52			no-map;
53		};
54
55		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
56			compatible = "shared-dma-pool";
57			reg = <0x00 0xa0100000 0x00 0xf00000>;
58			no-map;
59		};
60
61		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
62			compatible = "shared-dma-pool";
63			reg = <0x00 0xa1000000 0x00 0x100000>;
64			no-map;
65		};
66
67		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
68			compatible = "shared-dma-pool";
69			reg = <0x00 0xa1100000 0x00 0xf00000>;
70			no-map;
71		};
72
73		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
74			compatible = "shared-dma-pool";
75			reg = <0x00 0xa2000000 0x00 0x100000>;
76			no-map;
77		};
78
79		main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
80			compatible = "shared-dma-pool";
81			reg = <0x00 0xa2100000 0x00 0xf00000>;
82			no-map;
83		};
84
85		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
86			compatible = "shared-dma-pool";
87			reg = <0x00 0xa3000000 0x00 0x100000>;
88			no-map;
89		};
90
91		main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
92			compatible = "shared-dma-pool";
93			reg = <0x00 0xa3100000 0x00 0xf00000>;
94			no-map;
95		};
96
97		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
98			compatible = "shared-dma-pool";
99			reg = <0x00 0xa4000000 0x00 0x100000>;
100			no-map;
101		};
102
103		main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
104			compatible = "shared-dma-pool";
105			reg = <0x00 0xa4100000 0x00 0xf00000>;
106			no-map;
107		};
108
109		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
110			compatible = "shared-dma-pool";
111			reg = <0x00 0xa5000000 0x00 0x100000>;
112			no-map;
113		};
114
115		main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
116			compatible = "shared-dma-pool";
117			reg = <0x00 0xa5100000 0x00 0xf00000>;
118			no-map;
119		};
120
121		main_r5fss2_core0_dma_memory_region: r5f-dma-memory@a6000000 {
122			compatible = "shared-dma-pool";
123			reg = <0x00 0xa6000000 0x00 0x100000>;
124			no-map;
125		};
126
127		main_r5fss2_core0_memory_region: r5f-memory@a6100000 {
128			compatible = "shared-dma-pool";
129			reg = <0x00 0xa6100000 0x00 0xf00000>;
130			no-map;
131		};
132
133		main_r5fss2_core1_dma_memory_region: r5f-dma-memory@a7000000 {
134			compatible = "shared-dma-pool";
135			reg = <0x00 0xa7000000 0x00 0x100000>;
136			no-map;
137		};
138
139		main_r5fss2_core1_memory_region: r5f-memory@a7100000 {
140			compatible = "shared-dma-pool";
141			reg = <0x00 0xa7100000 0x00 0xf00000>;
142			no-map;
143		};
144
145		c71_0_dma_memory_region: c71-dma-memory@a8000000 {
146			compatible = "shared-dma-pool";
147			reg = <0x00 0xa8000000 0x00 0x100000>;
148			no-map;
149		};
150
151		c71_0_memory_region: c71-memory@a8100000 {
152			compatible = "shared-dma-pool";
153			reg = <0x00 0xa8100000 0x00 0xf00000>;
154			no-map;
155		};
156
157		c71_1_dma_memory_region: c71-dma-memory@a9000000 {
158			compatible = "shared-dma-pool";
159			reg = <0x00 0xa9000000 0x00 0x100000>;
160			no-map;
161		};
162
163		c71_1_memory_region: c71-memory@a9100000 {
164			compatible = "shared-dma-pool";
165			reg = <0x00 0xa9100000 0x00 0xf00000>;
166			no-map;
167		};
168
169		c71_2_dma_memory_region: c71-dma-memory@aa000000 {
170			compatible = "shared-dma-pool";
171			reg = <0x00 0xaa000000 0x00 0x100000>;
172			no-map;
173		};
174
175		c71_2_memory_region: c71-memory@aa100000 {
176			compatible = "shared-dma-pool";
177			reg = <0x00 0xaa100000 0x00 0xf00000>;
178			no-map;
179		};
180
181		c71_3_dma_memory_region: c71-dma-memory@ab000000 {
182			compatible = "shared-dma-pool";
183			reg = <0x00 0xab000000 0x00 0x100000>;
184			no-map;
185		};
186
187		c71_3_memory_region: c71-memory@ab100000 {
188			compatible = "shared-dma-pool";
189			reg = <0x00 0xab100000 0x00 0xf00000>;
190			no-map;
191		};
192	};
193
194	evm_12v0: regulator-evm12v0 {
195		/* main supply */
196		compatible = "regulator-fixed";
197		regulator-name = "evm_12v0";
198		regulator-min-microvolt = <12000000>;
199		regulator-max-microvolt = <12000000>;
200		regulator-always-on;
201		regulator-boot-on;
202	};
203
204	vsys_3v3: regulator-vsys3v3 {
205		/* Output of LM5140 */
206		compatible = "regulator-fixed";
207		regulator-name = "vsys_3v3";
208		regulator-min-microvolt = <3300000>;
209		regulator-max-microvolt = <3300000>;
210		vin-supply = <&evm_12v0>;
211		regulator-always-on;
212		regulator-boot-on;
213	};
214
215	vsys_5v0: regulator-vsys5v0 {
216		/* Output of LM5140 */
217		compatible = "regulator-fixed";
218		regulator-name = "vsys_5v0";
219		regulator-min-microvolt = <5000000>;
220		regulator-max-microvolt = <5000000>;
221		vin-supply = <&evm_12v0>;
222		regulator-always-on;
223		regulator-boot-on;
224	};
225
226	vdd_mmc1: regulator-sd {
227		/* Output of TPS22918 */
228		compatible = "regulator-fixed";
229		regulator-name = "vdd_mmc1";
230		regulator-min-microvolt = <3300000>;
231		regulator-max-microvolt = <3300000>;
232		regulator-boot-on;
233		enable-active-high;
234		vin-supply = <&vsys_3v3>;
235		gpio = <&exp2 2 GPIO_ACTIVE_HIGH>;
236	};
237
238	vdd_sd_dv: regulator-TLV71033 {
239		/* Output of TLV71033 */
240		compatible = "regulator-gpio";
241		regulator-name = "tlv71033";
242		pinctrl-names = "default";
243		pinctrl-0 = <&vdd_sd_dv_pins_default>;
244		regulator-min-microvolt = <1800000>;
245		regulator-max-microvolt = <3300000>;
246		regulator-boot-on;
247		vin-supply = <&vsys_5v0>;
248		gpios = <&main_gpio0 8 GPIO_ACTIVE_HIGH>;
249		states = <1800000 0x0>,
250			 <3300000 0x1>;
251	};
252};
253
254&main_pmx0 {
255	bootph-all;
256	main_uart8_pins_default: main-uart8-default-pins {
257		bootph-all;
258		pinctrl-single,pins = <
259			J784S4_IOPAD(0x040, PIN_INPUT, 14) /* (AF37) MCASP0_AXR0.UART8_CTSn */
260			J784S4_IOPAD(0x044, PIN_OUTPUT, 14) /* (AG37) MCASP0_AXR1.UART8_RTSn */
261			J784S4_IOPAD(0x0d0, PIN_INPUT, 11) /* (AP38) SPI0_CS1.UART8_RXD */
262			J784S4_IOPAD(0x0d4, PIN_OUTPUT, 11) /* (AN38) SPI0_CLK.UART8_TXD */
263		>;
264	};
265
266	main_i2c0_pins_default: main-i2c0-default-pins {
267		pinctrl-single,pins = <
268			J784S4_IOPAD(0x0e0, PIN_INPUT_PULLUP, 0) /* (AN36) I2C0_SCL */
269			J784S4_IOPAD(0x0e4, PIN_INPUT_PULLUP, 0) /* (AP37) I2C0_SDA */
270		>;
271	};
272
273	main_mmc1_pins_default: main-mmc1-default-pins {
274		bootph-all;
275		pinctrl-single,pins = <
276			J784S4_IOPAD(0x104, PIN_INPUT, 0) /* (AB38) MMC1_CLK */
277			J784S4_IOPAD(0x108, PIN_INPUT, 0) /* (AB36) MMC1_CMD */
278			J784S4_IOPAD(0x100, PIN_INPUT, 0) /* (No Pin) MMC1_CLKLB */
279			J784S4_IOPAD(0x0fc, PIN_INPUT, 0) /* (AA33) MMC1_DAT0 */
280			J784S4_IOPAD(0x0f8, PIN_INPUT, 0) /* (AB34) MMC1_DAT1 */
281			J784S4_IOPAD(0x0f4, PIN_INPUT, 0) /* (AA32) MMC1_DAT2 */
282			J784S4_IOPAD(0x0f0, PIN_INPUT, 0) /* (AC38) MMC1_DAT3 */
283			J784S4_IOPAD(0x0e8, PIN_INPUT, 8) /* (AR38) TIMER_IO0.MMC1_SDCD */
284		>;
285	};
286
287	vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
288		pinctrl-single,pins = <
289			J784S4_IOPAD(0x020, PIN_INPUT, 7) /* (AJ35) MCAN15_RX.GPIO0_8 */
290		>;
291	};
292};
293
294&wkup_pmx2 {
295	bootph-all;
296	wkup_uart0_pins_default: wkup-uart0-default-pins {
297		bootph-all;
298		pinctrl-single,pins = <
299			J721S2_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (L37) WKUP_GPIO0_6.WKUP_UART0_CTSn */
300			J721S2_WKUP_IOPAD(0x074, PIN_INPUT, 0) /* (L36) WKUP_GPIO0_7.WKUP_UART0_RTSn */
301			J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */
302			J721S2_WKUP_IOPAD(0x04c, PIN_INPUT, 0) /* (K34) WKUP_UART0_TXD */
303		>;
304	};
305
306	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
307		bootph-all;
308		pinctrl-single,pins = <
309			J721S2_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (N33) WKUP_I2C0_SCL */
310			J721S2_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (N35) WKUP_I2C0_SDA */
311		>;
312	};
313
314	mcu_uart0_pins_default: mcu-uart0-default-pins {
315		bootph-all;
316		pinctrl-single,pins = <
317			J784S4_WKUP_IOPAD(0x090, PIN_INPUT, 0) /* (H37) WKUP_GPIO0_14.MCU_UART0_CTSn */
318			J784S4_WKUP_IOPAD(0x094, PIN_OUTPUT, 0) /* (K37) WKUP_GPIO0_15.MCU_UART0_RTSn */
319			J784S4_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (K38) WKUP_GPIO0_13.MCU_UART0_RXD */
320			J784S4_WKUP_IOPAD(0x088, PIN_OUTPUT, 0) /* (J37) WKUP_GPIO0_12.MCU_UART0_TXD */
321		>;
322	};
323
324	mcu_cpsw_pins_default: mcu-cpsw-default-pins {
325		pinctrl-single,pins = <
326			J784S4_WKUP_IOPAD(0x02c, PIN_INPUT, 0) /* (A35) MCU_RGMII1_RD0 */
327			J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (B36) MCU_RGMII1_RD1 */
328			J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (C36) MCU_RGMII1_RD2 */
329			J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D36) MCU_RGMII1_RD3 */
330			J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (B37) MCU_RGMII1_RXC */
331			J784S4_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (C37) MCU_RGMII1_RX_CTL */
332			J784S4_WKUP_IOPAD(0x014, PIN_OUTPUT, 0) /* (D37) MCU_RGMII1_TD0 */
333			J784S4_WKUP_IOPAD(0x010, PIN_OUTPUT, 0) /* (D38) MCU_RGMII1_TD1 */
334			J784S4_WKUP_IOPAD(0x00c, PIN_OUTPUT, 0) /* (E37) MCU_RGMII1_TD2 */
335			J784S4_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E38) MCU_RGMII1_TD3 */
336			J784S4_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (E36) MCU_RGMII1_TXC */
337			J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (C38) MCU_RGMII1_TX_CTL */
338		>;
339	};
340
341	mcu_mdio_pins_default: mcu-mdio-default-pins {
342		pinctrl-single,pins = <
343			J784S4_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A36) MCU_MDIO0_MDC */
344			J784S4_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (B35) MCU_MDIO0_MDIO */
345		>;
346	};
347
348	mcu_adc0_pins_default: mcu-adc0-default-pins {
349		pinctrl-single,pins = <
350			J784S4_WKUP_IOPAD(0x0cc, PIN_INPUT, 0) /* (P36) MCU_ADC0_AIN0 */
351			J784S4_WKUP_IOPAD(0x0d0, PIN_INPUT, 0) /* (V36) MCU_ADC0_AIN1 */
352			J784S4_WKUP_IOPAD(0x0d4, PIN_INPUT, 0) /* (T34) MCU_ADC0_AIN2 */
353			J784S4_WKUP_IOPAD(0x0d8, PIN_INPUT, 0) /* (T36) MCU_ADC0_AIN3 */
354			J784S4_WKUP_IOPAD(0x0dc, PIN_INPUT, 0) /* (P34) MCU_ADC0_AIN4 */
355			J784S4_WKUP_IOPAD(0x0e0, PIN_INPUT, 0) /* (R37) MCU_ADC0_AIN5 */
356			J784S4_WKUP_IOPAD(0x0e4, PIN_INPUT, 0) /* (R33) MCU_ADC0_AIN6 */
357			J784S4_WKUP_IOPAD(0x0e8, PIN_INPUT, 0) /* (V38) MCU_ADC0_AIN7 */
358		>;
359	};
360
361	mcu_adc1_pins_default: mcu-adc1-default-pins {
362		pinctrl-single,pins = <
363			J784S4_WKUP_IOPAD(0x0ec, PIN_INPUT, 0) /* (Y38) MCU_ADC1_AIN0 */
364			J784S4_WKUP_IOPAD(0x0f0, PIN_INPUT, 0) /* (Y34) MCU_ADC1_AIN1 */
365			J784S4_WKUP_IOPAD(0x0f4, PIN_INPUT, 0) /* (V34) MCU_ADC1_AIN2 */
366			J784S4_WKUP_IOPAD(0x0f8, PIN_INPUT, 0) /* (W37) MCU_ADC1_AIN3 */
367			J784S4_WKUP_IOPAD(0x0fc, PIN_INPUT, 0) /* (AA37) MCU_ADC1_AIN4 */
368			J784S4_WKUP_IOPAD(0x100, PIN_INPUT, 0) /* (W33) MCU_ADC1_AIN5 */
369			J784S4_WKUP_IOPAD(0x104, PIN_INPUT, 0) /* (U33) MCU_ADC1_AIN6 */
370			J784S4_WKUP_IOPAD(0x108, PIN_INPUT, 0) /* (Y36) MCU_ADC1_AIN7 */
371		>;
372	};
373};
374
375&wkup_pmx0 {
376	bootph-all;
377	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
378		bootph-all;
379		pinctrl-single,pins = <
380			J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (E32) MCU_OSPI0_CLK */
381			J784S4_WKUP_IOPAD(0x02c, PIN_OUTPUT, 0) /* (A32) MCU_OSPI0_CSn0 */
382			J784S4_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (B33) MCU_OSPI0_D0 */
383			J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (B32) MCU_OSPI0_D1 */
384			J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (C33) MCU_OSPI0_D2 */
385			J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (C35) MCU_OSPI0_D3 */
386			J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (D33) MCU_OSPI0_D4 */
387			J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D34) MCU_OSPI0_D5 */
388			J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (E34) MCU_OSPI0_D6 */
389			J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (E33) MCU_OSPI0_D7 */
390			J784S4_WKUP_IOPAD(0x008, PIN_INPUT, 0) /* (C34) MCU_OSPI0_DQS */
391		>;
392	};
393};
394
395&wkup_pmx1 {
396	bootph-all;
397	mcu_fss0_ospi0_1_pins_default: mcu-fss0-ospi0-1-default-pins {
398		bootph-all;
399		pinctrl-single,pins = <
400			J784S4_WKUP_IOPAD(0x004, PIN_OUTPUT, 6) /* (C32) MCU_OSPI0_ECC_FAIL */
401			J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 6) /* (B34) MCU_OSPI0_RESET_OUT0 */
402		>;
403	};
404
405	mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-default-pins {
406		bootph-all;
407		pinctrl-single,pins = <
408			J784S4_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (F32) MCU_OSPI1_CLK */
409			J784S4_WKUP_IOPAD(0x024, PIN_OUTPUT, 0) /* (G32) MCU_OSPI1_CSn0 */
410			J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (E35) MCU_OSPI1_D0 */
411			J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (D31) MCU_OSPI1_D1 */
412			J784S4_WKUP_IOPAD(0x01C, PIN_INPUT, 0) /* (G31) MCU_OSPI1_D2 */
413			J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (F33) MCU_OSPI1_D3 */
414			J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (F31) MCU_OSPI1_DQS */
415			J784S4_WKUP_IOPAD(0x00C, PIN_INPUT, 0) /* (C31) MCU_OSPI1_LBCLKO */
416		>;
417	};
418};
419
420&wkup_uart0 {
421	/* Firmware usage */
422	status = "reserved";
423	pinctrl-names = "default";
424	pinctrl-0 = <&wkup_uart0_pins_default>;
425};
426
427&wkup_i2c0 {
428	bootph-all;
429	status = "okay";
430	pinctrl-names = "default";
431	pinctrl-0 = <&wkup_i2c0_pins_default>;
432	clock-frequency = <400000>;
433
434	eeprom@50 {
435		/* CAV24C256WE-GT3 */
436		compatible = "atmel,24c256";
437		reg = <0x50>;
438	};
439};
440
441&mcu_uart0 {
442	bootph-all;
443	status = "okay";
444	pinctrl-names = "default";
445	pinctrl-0 = <&mcu_uart0_pins_default>;
446};
447
448&main_uart8 {
449	bootph-all;
450	status = "okay";
451	pinctrl-names = "default";
452	pinctrl-0 = <&main_uart8_pins_default>;
453};
454
455&ufs_wrapper {
456	status = "okay";
457};
458
459&fss {
460	bootph-all;
461	status = "okay";
462};
463
464&ospi0 {
465	bootph-all;
466	status = "okay";
467	pinctrl-names = "default";
468	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>, <&mcu_fss0_ospi0_1_pins_default>;
469
470	flash@0 {
471		bootph-all;
472		compatible = "jedec,spi-nor";
473		reg = <0x0>;
474		spi-tx-bus-width = <8>;
475		spi-rx-bus-width = <8>;
476		spi-max-frequency = <25000000>;
477		cdns,tshsl-ns = <60>;
478		cdns,tsd2d-ns = <60>;
479		cdns,tchsh-ns = <60>;
480		cdns,tslch-ns = <60>;
481		cdns,read-delay = <4>;
482
483		partitions {
484			compatible = "fixed-partitions";
485			#address-cells = <1>;
486			#size-cells = <1>;
487
488			partition@0 {
489				label = "ospi.tiboot3";
490				reg = <0x0 0x80000>;
491			};
492
493			partition@80000 {
494				label = "ospi.tispl";
495				reg = <0x80000 0x200000>;
496			};
497
498			partition@280000 {
499				label = "ospi.u-boot";
500				reg = <0x280000 0x400000>;
501			};
502
503			partition@680000 {
504				label = "ospi.env";
505				reg = <0x680000 0x40000>;
506			};
507
508			partition@6c0000 {
509				label = "ospi.env.backup";
510				reg = <0x6c0000 0x40000>;
511			};
512
513			partition@800000 {
514				label = "ospi.rootfs";
515				reg = <0x800000 0x37c0000>;
516			};
517
518			partition@3fc0000 {
519				bootph-all;
520				label = "ospi.phypattern";
521				reg = <0x3fc0000 0x40000>;
522			};
523		};
524	};
525};
526
527&ospi1 {
528	bootph-all;
529	status = "okay";
530	pinctrl-names = "default";
531	pinctrl-0 = <&mcu_fss0_ospi1_pins_default>;
532
533	flash@0 {
534		bootph-all;
535		compatible = "jedec,spi-nor";
536		reg = <0x0>;
537		spi-tx-bus-width = <1>;
538		spi-rx-bus-width = <4>;
539		spi-max-frequency = <40000000>;
540		cdns,tshsl-ns = <60>;
541		cdns,tsd2d-ns = <60>;
542		cdns,tchsh-ns = <60>;
543		cdns,tslch-ns = <60>;
544		cdns,read-delay = <2>;
545
546		partitions {
547			compatible = "fixed-partitions";
548			#address-cells = <1>;
549			#size-cells = <1>;
550
551			partition@0 {
552				label = "qspi.tiboot3";
553				reg = <0x0 0x80000>;
554			};
555
556			partition@80000 {
557				label = "qspi.tispl";
558				reg = <0x80000 0x200000>;
559			};
560
561			partition@280000 {
562				label = "qspi.u-boot";
563				reg = <0x280000 0x400000>;
564			};
565
566			partition@680000 {
567				label = "qspi.env";
568				reg = <0x680000 0x40000>;
569			};
570
571			partition@6c0000 {
572				label = "qspi.env.backup";
573				reg = <0x6c0000 0x40000>;
574			};
575
576			partition@800000 {
577				label = "qspi.rootfs";
578				reg = <0x800000 0x37c0000>;
579			};
580
581			partition@3fc0000 {
582				bootph-all;
583				label = "qspi.phypattern";
584				reg = <0x3fc0000 0x40000>;
585			};
586		};
587
588	};
589};
590
591&main_i2c0 {
592	status = "okay";
593	pinctrl-names = "default";
594	pinctrl-0 = <&main_i2c0_pins_default>;
595
596	clock-frequency = <400000>;
597
598	exp1: gpio@20 {
599		compatible = "ti,tca6416";
600		reg = <0x20>;
601		gpio-controller;
602		#gpio-cells = <2>;
603		gpio-line-names = "PCIE1_2L_MODE_SEL", "PCIE1_4L_PERSTZ", "PCIE1_2L_RC_RSTZ",
604				  "PCIE1_2L_EP_RST_EN", "PCIE0_4L_MODE_SEL", "PCIE0_4L_PERSTZ",
605				  "PCIE0_4L_RC_RSTZ", "PCIE0_4L_EP_RST_EN", "PCIE1_4L_PRSNT#",
606				  "PCIE0_4L_PRSNT#", "CDCI1_OE1/OE4", "CDCI1_OE2/OE3",
607				  "AUDIO_MUX_SEL", "EXP_MUX2", "EXP_MUX3", "GESI_EXP_PHY_RSTZ";
608	};
609
610	exp2: gpio@22 {
611		compatible = "ti,tca6424";
612		reg = <0x22>;
613		gpio-controller;
614		#gpio-cells = <2>;
615		gpio-line-names = "R_GPIO_RGMII1_RST", "ENET2_I2CMUX_SEL", "GPIO_USD_PWR_EN",
616				  "USBC_PWR_EN", "USBC_MODE_SEL1", "USBC_MODE_SEL0",
617				  "GPIO_LIN_EN", "R_CAN_STB", "CTRL_PM_I2C_OE#",
618				  "ENET2_EXP_PWRDN", "ENET2_EXP_SPARE2", "CDCI2_RSTZ",
619				  "USB2.0_MUX_SEL", "CANUART_MUX_SEL0", "CANUART_MUX2_SEL1",
620				  "CANUART_MUX1_SEL1", "ENET1_EXP_PWRDN", "ENET1_EXP_RESETZ",
621				  "ENET1_I2CMUX_SEL", "ENET1_EXP_SPARE2", "ENET2_EXP_RESETZ",
622				  "USER_INPUT1", "USER_LED1", "USER_LED2";
623	};
624};
625
626&main_sdhci0 {
627	bootph-all;
628	/* eMMC */
629	status = "okay";
630	non-removable;
631	ti,driver-strength-ohm = <50>;
632	disable-wp;
633};
634
635&main_sdhci1 {
636	bootph-all;
637	/* SD card */
638	status = "okay";
639	pinctrl-0 = <&main_mmc1_pins_default>;
640	pinctrl-names = "default";
641	disable-wp;
642	vmmc-supply = <&vdd_mmc1>;
643	vqmmc-supply = <&vdd_sd_dv>;
644};
645
646&main_gpio0 {
647	status = "okay";
648};
649
650&mcu_cpsw {
651	status = "okay";
652	pinctrl-names = "default";
653	pinctrl-0 = <&mcu_cpsw_pins_default>;
654};
655
656&davinci_mdio {
657	pinctrl-names = "default";
658	pinctrl-0 = <&mcu_mdio_pins_default>;
659
660	mcu_phy0: ethernet-phy@0 {
661		reg = <0>;
662		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
663		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
664		ti,min-output-impedance;
665	};
666};
667
668&mcu_cpsw_port1 {
669	status = "okay";
670	phy-mode = "rgmii-rxid";
671	phy-handle = <&mcu_phy0>;
672};
673
674&mailbox0_cluster0 {
675	status = "okay";
676	interrupts = <436>;
677
678	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
679		ti,mbox-rx = <0 0 0>;
680		ti,mbox-tx = <1 0 0>;
681	};
682
683	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
684		ti,mbox-rx = <2 0 0>;
685		ti,mbox-tx = <3 0 0>;
686	};
687};
688
689&mailbox0_cluster1 {
690	status = "okay";
691	interrupts = <432>;
692
693	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
694		ti,mbox-rx = <0 0 0>;
695		ti,mbox-tx = <1 0 0>;
696	};
697
698	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
699		ti,mbox-rx = <2 0 0>;
700		ti,mbox-tx = <3 0 0>;
701	};
702};
703
704&mailbox0_cluster2 {
705	status = "okay";
706	interrupts = <428>;
707
708	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
709		ti,mbox-rx = <0 0 0>;
710		ti,mbox-tx = <1 0 0>;
711	};
712
713	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
714		ti,mbox-rx = <2 0 0>;
715		ti,mbox-tx = <3 0 0>;
716	};
717};
718
719&mailbox0_cluster3 {
720	status = "okay";
721	interrupts = <424>;
722
723	mbox_main_r5fss2_core0: mbox-main-r5fss2-core0 {
724		ti,mbox-rx = <0 0 0>;
725		ti,mbox-tx = <1 0 0>;
726	};
727
728	mbox_main_r5fss2_core1: mbox-main-r5fss2-core1 {
729		ti,mbox-rx = <2 0 0>;
730		ti,mbox-tx = <3 0 0>;
731	};
732};
733
734&mailbox0_cluster4 {
735	status = "okay";
736	interrupts = <420>;
737
738	mbox_c71_0: mbox-c71-0 {
739		ti,mbox-rx = <0 0 0>;
740		ti,mbox-tx = <1 0 0>;
741	};
742
743	mbox_c71_1: mbox-c71-1 {
744		ti,mbox-rx = <2 0 0>;
745		ti,mbox-tx = <3 0 0>;
746	};
747};
748
749&mailbox0_cluster5 {
750	status = "okay";
751	interrupts = <416>;
752
753	mbox_c71_2: mbox-c71-2 {
754		ti,mbox-rx = <0 0 0>;
755		ti,mbox-tx = <1 0 0>;
756	};
757
758	mbox_c71_3: mbox-c71-3 {
759		ti,mbox-rx = <2 0 0>;
760		ti,mbox-tx = <3 0 0>;
761	};
762};
763
764&mcu_r5fss0_core0 {
765	status = "okay";
766	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
767	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
768			<&mcu_r5fss0_core0_memory_region>;
769};
770
771&mcu_r5fss0_core1 {
772	status = "okay";
773	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
774	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
775			<&mcu_r5fss0_core1_memory_region>;
776};
777
778&main_r5fss0_core0 {
779	status = "okay";
780	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
781	memory-region = <&main_r5fss0_core0_dma_memory_region>,
782			<&main_r5fss0_core0_memory_region>;
783};
784
785&main_r5fss0_core1 {
786	status = "okay";
787	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
788	memory-region = <&main_r5fss0_core1_dma_memory_region>,
789			<&main_r5fss0_core1_memory_region>;
790};
791
792&main_r5fss1_core0 {
793	status = "okay";
794	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
795	memory-region = <&main_r5fss1_core0_dma_memory_region>,
796			<&main_r5fss1_core0_memory_region>;
797};
798
799&main_r5fss1_core1 {
800	status = "okay";
801	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
802	memory-region = <&main_r5fss1_core1_dma_memory_region>,
803			<&main_r5fss1_core1_memory_region>;
804};
805
806&main_r5fss2_core0 {
807	status = "okay";
808	mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core0>;
809	memory-region = <&main_r5fss2_core0_dma_memory_region>,
810			<&main_r5fss2_core0_memory_region>;
811};
812
813&main_r5fss2_core1 {
814	status = "okay";
815	mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core1>;
816	memory-region = <&main_r5fss2_core1_dma_memory_region>,
817			<&main_r5fss2_core1_memory_region>;
818};
819
820&c71_0 {
821	status = "okay";
822	mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
823	memory-region = <&c71_0_dma_memory_region>,
824			<&c71_0_memory_region>;
825};
826
827&c71_1 {
828	status = "okay";
829	mboxes = <&mailbox0_cluster4 &mbox_c71_1>;
830	memory-region = <&c71_1_dma_memory_region>,
831			<&c71_1_memory_region>;
832};
833
834&c71_2 {
835	status = "okay";
836	mboxes = <&mailbox0_cluster5 &mbox_c71_2>;
837	memory-region = <&c71_2_dma_memory_region>,
838			<&c71_2_memory_region>;
839};
840
841&c71_3 {
842	status = "okay";
843	mboxes = <&mailbox0_cluster5 &mbox_c71_3>;
844	memory-region = <&c71_3_dma_memory_region>,
845			<&c71_3_memory_region>;
846};
847
848&tscadc0 {
849	pinctrl-0 = <&mcu_adc0_pins_default>;
850	pinctrl-names = "default";
851	status = "okay";
852	adc {
853		ti,adc-channels = <0 1 2 3 4 5 6 7>;
854	};
855};
856
857&tscadc1 {
858	pinctrl-0 = <&mcu_adc1_pins_default>;
859	pinctrl-names = "default";
860	status = "okay";
861	adc {
862		ti,adc-channels = <0 1 2 3 4 5 6 7>;
863	};
864};
865