1// SPDX-License-Identifier: BSD-3-Clause
2/*
3 * Copyright (c) 2021, Martin Botka <martin.botka@somainline.org>
4 */
5
6#include <dt-bindings/clock/qcom,gcc-sm6125.h>
7#include <dt-bindings/clock/qcom,rpmcc.h>
8#include <dt-bindings/gpio/gpio.h>
9#include <dt-bindings/interrupt-controller/arm-gic.h>
10#include <dt-bindings/power/qcom-rpmpd.h>
11
12/ {
13	interrupt-parent = <&intc>;
14	#address-cells = <2>;
15	#size-cells = <2>;
16
17	chosen { };
18
19	clocks {
20		xo_board: xo-board {
21			compatible = "fixed-clock";
22			#clock-cells = <0>;
23			clock-frequency = <19200000>;
24			clock-output-names = "xo_board";
25		};
26
27		sleep_clk: sleep-clk {
28			compatible = "fixed-clock";
29			#clock-cells = <0>;
30			clock-frequency = <32000>;
31			clock-output-names = "sleep_clk";
32		};
33	};
34
35	cpus {
36		#address-cells = <2>;
37		#size-cells = <0>;
38
39		CPU0: cpu@0 {
40			device_type = "cpu";
41			compatible = "qcom,kryo260";
42			reg = <0x0 0x0>;
43			enable-method = "psci";
44			capacity-dmips-mhz = <1024>;
45			next-level-cache = <&L2_0>;
46			L2_0: l2-cache {
47				compatible = "cache";
48			};
49		};
50
51		CPU1: cpu@1 {
52			device_type = "cpu";
53			compatible = "qcom,kryo260";
54			reg = <0x0 0x1>;
55			enable-method = "psci";
56			capacity-dmips-mhz = <1024>;
57			next-level-cache = <&L2_0>;
58		};
59
60		CPU2: cpu@2 {
61			device_type = "cpu";
62			compatible = "qcom,kryo260";
63			reg = <0x0 0x2>;
64			enable-method = "psci";
65			capacity-dmips-mhz = <1024>;
66			next-level-cache = <&L2_0>;
67		};
68
69		CPU3: cpu@3 {
70			device_type = "cpu";
71			compatible = "qcom,kryo260";
72			reg = <0x0 0x3>;
73			enable-method = "psci";
74			capacity-dmips-mhz = <1024>;
75			next-level-cache = <&L2_0>;
76		};
77
78		CPU4: cpu@100 {
79			device_type = "cpu";
80			compatible = "qcom,kryo260";
81			reg = <0x0 0x100>;
82			enable-method = "psci";
83			capacity-dmips-mhz = <1638>;
84			next-level-cache = <&L2_1>;
85			L2_1: l2-cache {
86				compatible = "cache";
87			};
88		};
89
90		CPU5: cpu@101 {
91			device_type = "cpu";
92			compatible = "qcom,kryo260";
93			reg = <0x0 0x101>;
94			enable-method = "psci";
95			capacity-dmips-mhz = <1638>;
96			next-level-cache = <&L2_1>;
97		};
98
99		CPU6: cpu@102 {
100			device_type = "cpu";
101			compatible = "qcom,kryo260";
102			reg = <0x0 0x102>;
103			enable-method = "psci";
104			capacity-dmips-mhz = <1638>;
105			next-level-cache = <&L2_1>;
106		};
107
108		CPU7: cpu@103 {
109			device_type = "cpu";
110			compatible = "qcom,kryo260";
111			reg = <0x0 0x103>;
112			enable-method = "psci";
113			capacity-dmips-mhz = <1638>;
114			next-level-cache = <&L2_1>;
115		};
116
117		cpu-map {
118			cluster0 {
119				core0 {
120					cpu = <&CPU0>;
121				};
122
123				core1 {
124					cpu = <&CPU1>;
125				};
126
127				core2 {
128					cpu = <&CPU2>;
129				};
130
131				core3 {
132					cpu = <&CPU3>;
133				};
134			};
135
136			cluster1 {
137				core0 {
138					cpu = <&CPU4>;
139				};
140
141				core1 {
142					cpu = <&CPU5>;
143				};
144
145				core2 {
146					cpu = <&CPU6>;
147				};
148
149				core3 {
150					cpu = <&CPU7>;
151				};
152			};
153		};
154	};
155
156	firmware {
157		scm: scm {
158			compatible = "qcom,scm-sm6125", "qcom,scm";
159			#reset-cells = <1>;
160		};
161	};
162
163	memory@40000000 {
164		/* We expect the bootloader to fill in the size */
165		reg = <0x0 0x40000000 0x0 0x0>;
166		device_type = "memory";
167	};
168
169	pmu {
170		compatible = "arm,armv8-pmuv3";
171		interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
172	};
173
174	psci {
175		compatible = "arm,psci-1.0";
176		method = "smc";
177	};
178
179	reserved_memory: reserved-memory {
180		#address-cells = <2>;
181		#size-cells = <2>;
182		ranges;
183
184		hyp_mem: memory@45700000 {
185			reg = <0x0 0x45700000 0x0 0x600000>;
186			no-map;
187		};
188
189		xbl_aop_mem: memory@45e00000 {
190			reg = <0x0 0x45e00000 0x0 0x140000>;
191			no-map;
192		};
193
194		sec_apps_mem: memory@45fff000 {
195			reg = <0x0 0x45fff000 0x0 0x1000>;
196			no-map;
197		};
198
199		smem_mem: memory@46000000 {
200			reg = <0x0 0x46000000 0x0 0x200000>;
201			no-map;
202		};
203
204		reserved_mem1: memory@46200000 {
205			reg = <0x0 0x46200000 0x0 0x2d00000>;
206			no-map;
207		};
208
209		camera_mem: memory@4ab00000 {
210			reg = <0x0 0x4ab00000 0x0 0x500000>;
211			no-map;
212		};
213
214		modem_mem: memory@4b000000 {
215			reg = <0x0 0x4b000000 0x0 0x7e00000>;
216			no-map;
217		};
218
219		venus_mem: memory@52e00000 {
220			reg = <0x0 0x52e00000 0x0 0x500000>;
221			no-map;
222		};
223
224		wlan_msa_mem: memory@53300000 {
225			reg = <0x0 0x53300000 0x0 0x200000>;
226			no-map;
227		};
228
229		cdsp_mem: memory@53500000 {
230			reg = <0x0 0x53500000 0x0 0x1e00000>;
231			no-map;
232		};
233
234		adsp_pil_mem: memory@55300000 {
235			reg = <0x0 0x55300000 0x0 0x1e00000>;
236			no-map;
237		};
238
239		ipa_fw_mem: memory@57100000 {
240			reg = <0x0 0x57100000 0x0 0x10000>;
241			no-map;
242		};
243
244		ipa_gsi_mem: memory@57110000 {
245			reg = <0x0 0x57110000 0x0 0x5000>;
246			no-map;
247		};
248
249		gpu_mem: memory@57115000 {
250			reg = <0x0 0x57115000 0x0 0x2000>;
251			no-map;
252		};
253
254		cont_splash_mem: memory@5c000000 {
255			reg = <0x0 0x5c000000 0x0 0x00f00000>;
256			no-map;
257		};
258
259		dfps_data_mem: memory@5cf00000 {
260			reg = <0x0 0x5cf00000 0x0 0x0100000>;
261			no-map;
262		};
263
264		cdsp_sec_mem: memory@5f800000 {
265			reg = <0x0 0x5f800000 0x0 0x1e00000>;
266			no-map;
267		};
268
269		qseecom_mem: memory@5e400000 {
270			reg = <0x0 0x5e400000 0x0 0x1400000>;
271			no-map;
272		};
273
274		sdsp_mem: memory@f3000000 {
275			reg = <0x0 0xf3000000 0x0 0x400000>;
276			no-map;
277		};
278
279		adsp_mem: memory@f3400000 {
280			reg = <0x0 0xf3400000 0x0 0x800000>;
281			no-map;
282		};
283
284		qseecom_ta_mem: memory@13fc00000 {
285			reg = <0x1 0x3fc00000 0x0 0x400000>;
286			no-map;
287		};
288	};
289
290	rpm-glink {
291		compatible = "qcom,glink-rpm";
292
293		interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
294		qcom,rpm-msg-ram = <&rpm_msg_ram>;
295		mboxes = <&apcs_glb 0>;
296
297		rpm_requests: rpm-requests {
298			compatible = "qcom,rpm-sm6125";
299			qcom,glink-channels = "rpm_requests";
300
301			rpmcc: clock-controller {
302				compatible = "qcom,rpmcc-sm6125", "qcom,rpmcc";
303				#clock-cells = <1>;
304			};
305
306			rpmpd: power-controller {
307				compatible = "qcom,sm6125-rpmpd";
308				#power-domain-cells = <1>;
309				operating-points-v2 = <&rpmpd_opp_table>;
310
311				rpmpd_opp_table: opp-table {
312					compatible = "operating-points-v2";
313
314					rpmpd_opp_ret: opp1 {
315						opp-level = <RPM_SMD_LEVEL_RETENTION>;
316					};
317
318					rpmpd_opp_ret_plus: opp2 {
319						opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
320					};
321
322					rpmpd_opp_min_svs: opp3 {
323						opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
324					};
325
326					rpmpd_opp_low_svs: opp4 {
327						opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
328					};
329
330					rpmpd_opp_svs: opp5 {
331						opp-level = <RPM_SMD_LEVEL_SVS>;
332					};
333
334					rpmpd_opp_svs_plus: opp6 {
335						opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
336					};
337
338					rpmpd_opp_nom: opp7 {
339						opp-level = <RPM_SMD_LEVEL_NOM>;
340					};
341
342					rpmpd_opp_nom_plus: opp8 {
343						opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
344					};
345
346					rpmpd_opp_turbo: opp9 {
347						opp-level = <RPM_SMD_LEVEL_TURBO>;
348					};
349
350					rpmpd_opp_turbo_no_cpr: opp10 {
351						opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
352					};
353				};
354			};
355		};
356	};
357
358	smem: smem {
359		compatible = "qcom,smem";
360		memory-region = <&smem_mem>;
361		hwlocks = <&tcsr_mutex 3>;
362	};
363
364	soc {
365		#address-cells = <1>;
366		#size-cells = <1>;
367		ranges = <0x00 0x00 0x00 0xffffffff>;
368		compatible = "simple-bus";
369
370		tcsr_mutex: hwlock@340000 {
371			compatible = "qcom,tcsr-mutex";
372			reg = <0x00340000 0x20000>;
373			#hwlock-cells = <1>;
374		};
375
376		tlmm: pinctrl@500000 {
377			compatible = "qcom,sm6125-tlmm";
378			reg = <0x00500000 0x400000>,
379			      <0x00900000 0x400000>,
380			      <0x00d00000 0x400000>;
381			reg-names = "west", "south", "east";
382			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
383			gpio-controller;
384			gpio-ranges = <&tlmm 0 0 134>;
385			#gpio-cells = <2>;
386			interrupt-controller;
387			#interrupt-cells = <2>;
388
389			sdc2_off_state: sdc2-off-state {
390				clk-pins {
391					pins = "sdc2_clk";
392					drive-strength = <2>;
393					bias-disable;
394				};
395
396				cmd-pins {
397					pins = "sdc2_cmd";
398					drive-strength = <2>;
399					bias-pull-up;
400				};
401
402				data-pins {
403					pins = "sdc2_data";
404					drive-strength = <2>;
405					bias-pull-up;
406				};
407			};
408
409			sdc2_on_state: sdc2-on-state {
410				clk-pins {
411					pins = "sdc2_clk";
412					drive-strength = <16>;
413					bias-disable;
414				};
415
416				cmd-pins {
417					pins = "sdc2_cmd";
418					drive-strength = <10>;
419					bias-pull-up;
420				};
421
422				data-pins {
423					pins = "sdc2_data";
424					drive-strength = <10>;
425					bias-pull-up;
426				};
427			};
428		};
429
430		gcc: clock-controller@1400000 {
431			compatible = "qcom,gcc-sm6125";
432			reg = <0x01400000 0x1f0000>;
433			#clock-cells = <1>;
434			#reset-cells = <1>;
435			#power-domain-cells = <1>;
436			clock-names = "bi_tcxo", "sleep_clk";
437			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
438		};
439
440		hsusb_phy1: phy@1613000 {
441			compatible = "qcom,msm8996-qusb2-phy";
442			reg = <0x01613000 0x180>;
443			#phy-cells = <0>;
444
445			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
446				 <&gcc GCC_AHB2PHY_USB_CLK>;
447			clock-names = "ref", "cfg_ahb";
448
449			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
450			status = "disabled";
451		};
452
453		rpm_msg_ram: sram@45f0000 {
454			compatible = "qcom,rpm-msg-ram";
455			reg = <0x045f0000 0x7000>;
456		};
457
458		sdhc_1: mmc@4744000 {
459			compatible = "qcom,sm6125-sdhci", "qcom,sdhci-msm-v5";
460			reg = <0x04744000 0x1000>, <0x04745000 0x1000>;
461			reg-names = "hc", "core";
462
463			interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
464				     <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
465			interrupt-names = "hc_irq", "pwr_irq";
466
467			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
468				 <&gcc GCC_SDCC1_APPS_CLK>,
469				 <&xo_board>;
470			clock-names = "iface", "core", "xo";
471
472			power-domains = <&rpmpd SM6125_VDDCX>;
473
474			qcom,dll-config = <0x000f642c>;
475			qcom,ddr-config = <0x80040873>;
476
477			bus-width = <8>;
478			non-removable;
479			status = "disabled";
480		};
481
482		sdhc_2: mmc@4784000 {
483			compatible = "qcom,sm6125-sdhci", "qcom,sdhci-msm-v5";
484			reg = <0x04784000 0x1000>;
485			reg-names = "hc";
486
487			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
488				     <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
489			interrupt-names = "hc_irq", "pwr_irq";
490
491			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
492				 <&gcc GCC_SDCC2_APPS_CLK>,
493				 <&xo_board>;
494			clock-names = "iface", "core", "xo";
495
496			pinctrl-0 = <&sdc2_on_state>;
497			pinctrl-1 = <&sdc2_off_state>;
498			pinctrl-names = "default", "sleep";
499
500			power-domains = <&rpmpd SM6125_VDDCX>;
501
502			qcom,dll-config = <0x0007642c>;
503			qcom,ddr-config = <0x80040873>;
504
505			bus-width = <4>;
506			status = "disabled";
507		};
508
509		usb3: usb@4ef8800 {
510			compatible = "qcom,sm6125-dwc3", "qcom,dwc3";
511			reg = <0x04ef8800 0x400>;
512			#address-cells = <1>;
513			#size-cells = <1>;
514			ranges;
515
516			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
517				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
518				 <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
519				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
520				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
521				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
522			clock-names = "cfg_noc",
523				      "core",
524				      "iface",
525				      "sleep",
526				      "mock_utmi",
527				      "xo";
528
529			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
530					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
531			assigned-clock-rates = <19200000>, <66666667>;
532
533			power-domains = <&gcc USB30_PRIM_GDSC>;
534			qcom,select-utmi-as-pipe-clk;
535			status = "disabled";
536
537			usb3_dwc3: usb@4e00000 {
538				compatible = "snps,dwc3";
539				reg = <0x04e00000 0xcd00>;
540				interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
541				phys = <&hsusb_phy1>;
542				phy-names = "usb2-phy";
543				snps,dis_u2_susphy_quirk;
544				snps,dis_enblslpm_quirk;
545				maximum-speed = "high-speed";
546				dr_mode = "peripheral";
547			};
548		};
549
550		sram@4690000 {
551			compatible = "qcom,rpm-stats";
552			reg = <0x04690000 0x10000>;
553		};
554
555		spmi_bus: spmi@1c40000 {
556			compatible = "qcom,spmi-pmic-arb";
557			reg = <0x01c40000 0x1100>,
558			      <0x01e00000 0x2000000>,
559			      <0x03e00000 0x100000>,
560			      <0x03f00000 0xa0000>,
561			      <0x01c0a000 0x26000>;
562			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
563			interrupt-names = "periph_irq";
564			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
565			qcom,ee = <0>;
566			qcom,channel = <0>;
567			#address-cells = <2>;
568			#size-cells = <0>;
569			interrupt-controller;
570			#interrupt-cells = <4>;
571			cell-index = <0>;
572		};
573
574		apcs_glb: mailbox@f111000 {
575			compatible = "qcom,sm6125-apcs-hmss-global";
576			reg = <0x0f111000 0x1000>;
577
578			#mbox-cells = <1>;
579		};
580
581		timer@f120000 {
582			compatible = "arm,armv7-timer-mem";
583			#address-cells = <1>;
584			#size-cells = <1>;
585			ranges;
586			reg = <0x0f120000 0x1000>;
587			clock-frequency = <19200000>;
588
589			frame@f121000 {
590				frame-number = <0>;
591				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
592					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
593				reg = <0x0f121000 0x1000>,
594				      <0x0f122000 0x1000>;
595			};
596
597			frame@f123000 {
598				frame-number = <1>;
599				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
600				reg = <0x0f123000 0x1000>;
601				status = "disabled";
602			};
603
604			frame@f124000 {
605				frame-number = <2>;
606				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
607				reg = <0x0f124000 0x1000>;
608				status = "disabled";
609			};
610
611			frame@f125000 {
612				frame-number = <3>;
613				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
614				reg = <0x0f125000 0x1000>;
615				status = "disabled";
616			};
617
618			frame@f126000 {
619				frame-number = <4>;
620				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
621				reg = <0x0f126000 0x1000>;
622				status = "disabled";
623			};
624
625			frame@f127000 {
626				frame-number = <5>;
627				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
628				reg = <0x0f127000 0x1000>;
629				status = "disabled";
630			};
631
632			frame@f128000 {
633				frame-number = <6>;
634				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
635				reg = <0x0f128000 0x1000>;
636				status = "disabled";
637			};
638		};
639
640		intc: interrupt-controller@f200000 {
641			compatible = "arm,gic-v3";
642			reg = <0x0f200000 0x20000>,
643			      <0x0f300000 0x100000>;
644			#interrupt-cells = <3>;
645			interrupt-controller;
646			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
647		};
648	};
649
650	timer {
651		compatible = "arm,armv8-timer";
652		interrupts = <GIC_PPI 1 0xf08
653			      GIC_PPI 2 0xf08
654			      GIC_PPI 3 0xf08
655			      GIC_PPI 0 0xf08>;
656		clock-frequency = <19200000>;
657	};
658};
659