1// SPDX-License-Identifier: BSD-3-Clause
2/*
3 * Copyright (c) 2021, Martin Botka <martin.botka@somainline.org>
4 */
5
6#include <dt-bindings/clock/qcom,gcc-sm6125.h>
7#include <dt-bindings/clock/qcom,rpmcc.h>
8#include <dt-bindings/gpio/gpio.h>
9#include <dt-bindings/interrupt-controller/arm-gic.h>
10#include <dt-bindings/power/qcom-rpmpd.h>
11
12/ {
13	interrupt-parent = <&intc>;
14	#address-cells = <2>;
15	#size-cells = <2>;
16
17	chosen { };
18
19	clocks {
20		xo_board: xo-board {
21			compatible = "fixed-clock";
22			#clock-cells = <0>;
23			clock-frequency = <19200000>;
24			clock-output-names = "xo_board";
25		};
26
27		sleep_clk: sleep-clk {
28			compatible = "fixed-clock";
29			#clock-cells = <0>;
30			clock-frequency = <32000>;
31			clock-output-names = "sleep_clk";
32		};
33	};
34
35	cpus {
36		#address-cells = <2>;
37		#size-cells = <0>;
38
39		CPU0: cpu@0 {
40			device_type = "cpu";
41			compatible = "qcom,kryo260";
42			reg = <0x0 0x0>;
43			enable-method = "psci";
44			capacity-dmips-mhz = <1024>;
45			next-level-cache = <&L2_0>;
46			L2_0: l2-cache {
47				compatible = "cache";
48			};
49		};
50
51		CPU1: cpu@1 {
52			device_type = "cpu";
53			compatible = "qcom,kryo260";
54			reg = <0x0 0x1>;
55			enable-method = "psci";
56			capacity-dmips-mhz = <1024>;
57			next-level-cache = <&L2_0>;
58		};
59
60		CPU2: cpu@2 {
61			device_type = "cpu";
62			compatible = "qcom,kryo260";
63			reg = <0x0 0x2>;
64			enable-method = "psci";
65			capacity-dmips-mhz = <1024>;
66			next-level-cache = <&L2_0>;
67		};
68
69		CPU3: cpu@3 {
70			device_type = "cpu";
71			compatible = "qcom,kryo260";
72			reg = <0x0 0x3>;
73			enable-method = "psci";
74			capacity-dmips-mhz = <1024>;
75			next-level-cache = <&L2_0>;
76		};
77
78		CPU4: cpu@100 {
79			device_type = "cpu";
80			compatible = "qcom,kryo260";
81			reg = <0x0 0x100>;
82			enable-method = "psci";
83			capacity-dmips-mhz = <1638>;
84			next-level-cache = <&L2_1>;
85			L2_1: l2-cache {
86				compatible = "cache";
87			};
88		};
89
90		CPU5: cpu@101 {
91			device_type = "cpu";
92			compatible = "qcom,kryo260";
93			reg = <0x0 0x101>;
94			enable-method = "psci";
95			capacity-dmips-mhz = <1638>;
96			next-level-cache = <&L2_1>;
97		};
98
99		CPU6: cpu@102 {
100			device_type = "cpu";
101			compatible = "qcom,kryo260";
102			reg = <0x0 0x102>;
103			enable-method = "psci";
104			capacity-dmips-mhz = <1638>;
105			next-level-cache = <&L2_1>;
106		};
107
108		CPU7: cpu@103 {
109			device_type = "cpu";
110			compatible = "qcom,kryo260";
111			reg = <0x0 0x103>;
112			enable-method = "psci";
113			capacity-dmips-mhz = <1638>;
114			next-level-cache = <&L2_1>;
115		};
116
117		cpu-map {
118			cluster0 {
119				core0 {
120					cpu = <&CPU0>;
121				};
122
123				core1 {
124					cpu = <&CPU1>;
125				};
126
127				core2 {
128					cpu = <&CPU2>;
129				};
130
131				core3 {
132					cpu = <&CPU3>;
133				};
134			};
135
136			cluster1 {
137				core0 {
138					cpu = <&CPU4>;
139				};
140
141				core1 {
142					cpu = <&CPU5>;
143				};
144
145				core2 {
146					cpu = <&CPU6>;
147				};
148
149				core3 {
150					cpu = <&CPU7>;
151				};
152			};
153		};
154	};
155
156	firmware {
157		scm: scm {
158			compatible = "qcom,scm-sm6125", "qcom,scm";
159			#reset-cells = <1>;
160		};
161	};
162
163	memory@40000000 {
164		/* We expect the bootloader to fill in the size */
165		reg = <0x0 0x40000000 0x0 0x0>;
166		device_type = "memory";
167	};
168
169	pmu {
170		compatible = "arm,armv8-pmuv3";
171		interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
172	};
173
174	psci {
175		compatible = "arm,psci-1.0";
176		method = "smc";
177	};
178
179	reserved_memory: reserved-memory {
180		#address-cells = <2>;
181		#size-cells = <2>;
182		ranges;
183
184		hyp_mem: memory@45700000 {
185			reg = <0x0 0x45700000 0x0 0x600000>;
186			no-map;
187		};
188
189		xbl_aop_mem: memory@45e00000 {
190			reg = <0x0 0x45e00000 0x0 0x140000>;
191			no-map;
192		};
193
194		sec_apps_mem: memory@45fff000 {
195			reg = <0x0 0x45fff000 0x0 0x1000>;
196			no-map;
197		};
198
199		smem_mem: memory@46000000 {
200			reg = <0x0 0x46000000 0x0 0x200000>;
201			no-map;
202		};
203
204		reserved_mem1: memory@46200000 {
205			reg = <0x0 0x46200000 0x0 0x2d00000>;
206			no-map;
207		};
208
209		camera_mem: memory@4ab00000 {
210			reg = <0x0 0x4ab00000 0x0 0x500000>;
211			no-map;
212		};
213
214		modem_mem: memory@4b000000 {
215			reg = <0x0 0x4b000000 0x0 0x7e00000>;
216			no-map;
217		};
218
219		venus_mem: memory@52e00000 {
220			reg = <0x0 0x52e00000 0x0 0x500000>;
221			no-map;
222		};
223
224		wlan_msa_mem: memory@53300000 {
225			reg = <0x0 0x53300000 0x0 0x200000>;
226			no-map;
227		};
228
229		cdsp_mem: memory@53500000 {
230			reg = <0x0 0x53500000 0x0 0x1e00000>;
231			no-map;
232		};
233
234		adsp_pil_mem: memory@55300000 {
235			reg = <0x0 0x55300000 0x0 0x1e00000>;
236			no-map;
237		};
238
239		ipa_fw_mem: memory@57100000 {
240			reg = <0x0 0x57100000 0x0 0x10000>;
241			no-map;
242		};
243
244		ipa_gsi_mem: memory@57110000 {
245			reg = <0x0 0x57110000 0x0 0x5000>;
246			no-map;
247		};
248
249		gpu_mem: memory@57115000 {
250			reg = <0x0 0x57115000 0x0 0x2000>;
251			no-map;
252		};
253
254		cont_splash_mem: memory@5c000000 {
255			reg = <0x0 0x5c000000 0x0 0x00f00000>;
256			no-map;
257		};
258
259		dfps_data_mem: memory@5cf00000 {
260			reg = <0x0 0x5cf00000 0x0 0x0100000>;
261			no-map;
262		};
263
264		cdsp_sec_mem: memory@5f800000 {
265			reg = <0x0 0x5f800000 0x0 0x1e00000>;
266			no-map;
267		};
268
269		qseecom_mem: memory@5e400000 {
270			reg = <0x0 0x5e400000 0x0 0x1400000>;
271			no-map;
272		};
273
274		sdsp_mem: memory@f3000000 {
275			reg = <0x0 0xf3000000 0x0 0x400000>;
276			no-map;
277		};
278
279		adsp_mem: memory@f3400000 {
280			reg = <0x0 0xf3400000 0x0 0x800000>;
281			no-map;
282		};
283
284		qseecom_ta_mem: memory@13fc00000 {
285			reg = <0x1 0x3fc00000 0x0 0x400000>;
286			no-map;
287		};
288	};
289
290	rpm-glink {
291		compatible = "qcom,glink-rpm";
292
293		interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
294		qcom,rpm-msg-ram = <&rpm_msg_ram>;
295		mboxes = <&apcs_glb 0>;
296
297		rpm_requests: rpm-requests {
298			compatible = "qcom,rpm-sm6125";
299			qcom,glink-channels = "rpm_requests";
300
301			rpmcc: clock-controller {
302				compatible = "qcom,rpmcc-sm6125", "qcom,rpmcc";
303				#clock-cells = <1>;
304			};
305		};
306	};
307
308	smem: smem {
309		compatible = "qcom,smem";
310		memory-region = <&smem_mem>;
311		hwlocks = <&tcsr_mutex 3>;
312	};
313
314	soc {
315		#address-cells = <1>;
316		#size-cells = <1>;
317		ranges = <0x00 0x00 0x00 0xffffffff>;
318		compatible = "simple-bus";
319
320		tcsr_mutex: hwlock@340000 {
321			compatible = "qcom,tcsr-mutex";
322			reg = <0x00340000 0x20000>;
323			#hwlock-cells = <1>;
324		};
325
326		tlmm: pinctrl@500000 {
327			compatible = "qcom,sm6125-tlmm";
328			reg = <0x00500000 0x400000>,
329				<0x00900000 0x400000>,
330				<0x00d00000 0x400000>;
331			reg-names = "west", "south", "east";
332			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
333			gpio-controller;
334			gpio-ranges = <&tlmm 0 0 134>;
335			#gpio-cells = <2>;
336			interrupt-controller;
337			#interrupt-cells = <2>;
338
339			sdc2_state_off: sdc2-off {
340				clk {
341					pins = "sdc2_clk";
342					bias-disable;
343					drive-strength = <2>;
344				};
345
346				cmd {
347					pins = "sdc2_cmd";
348					bias-pull-up;
349					drive-strength = <2>;
350				};
351
352				data {
353					pins = "sdc2_data";
354					bias-pull-up;
355					drive-strength = <2>;
356				};
357			};
358		};
359
360		gcc: clock-controller@1400000 {
361			compatible = "qcom,gcc-sm6125";
362			reg = <0x01400000 0x1f0000>;
363			#clock-cells = <1>;
364			#reset-cells = <1>;
365			#power-domain-cells = <1>;
366			clock-names = "bi_tcxo", "sleep_clk";
367			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
368		};
369
370		hsusb_phy1: phy@1613000 {
371			compatible = "qcom,msm8996-qusb2-phy";
372			reg = <0x01613000 0x180>;
373			#phy-cells = <0>;
374
375			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
376				 <&gcc GCC_AHB2PHY_USB_CLK>;
377			clock-names = "ref", "cfg_ahb";
378
379			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
380			status = "disabled";
381		};
382
383		rpm_msg_ram: memory@45f0000 {
384			compatible = "qcom,rpm-msg-ram";
385			reg = <0x045f0000 0x7000>;
386		};
387
388		sdhc_1: sdhci@4744000 {
389			compatible = "qcom,sm6125-sdhci", "qcom,sdhci-msm-v5";
390			reg = <0x04744000 0x1000>, <0x04745000 0x1000>;
391			reg-names = "hc", "core";
392
393			interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
394				<GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
395			interrupt-names = "hc_irq", "pwr_irq";
396
397			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
398				<&gcc GCC_SDCC1_APPS_CLK>,
399				<&xo_board>;
400			clock-names = "iface", "core", "xo";
401			bus-width = <8>;
402			non-removable;
403			status = "disabled";
404		};
405
406		sdhc_2: sdhci@4784000 {
407			compatible = "qcom,sm6125-sdhci", "qcom,sdhci-msm-v5";
408			reg = <0x04784000 0x1000>;
409			reg-names = "hc";
410
411			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
412				<GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
413			interrupt-names = "hc_irq", "pwr_irq";
414
415			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
416				<&gcc GCC_SDCC2_APPS_CLK>,
417				<&xo_board>;
418			clock-names = "iface", "core", "xo";
419
420			pinctrl-0 = <&sdc2_state_on>;
421			pinctrl-1 = <&sdc2_state_off>;
422			pinctrl-names = "default", "sleep";
423
424			bus-width = <4>;
425			status = "disabled";
426		};
427
428		usb3: usb@4ef8800 {
429			compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
430			reg = <0x04ef8800 0x400>;
431			#address-cells = <1>;
432			#size-cells = <1>;
433			ranges;
434
435			clocks = <&gcc GCC_USB30_PRIM_MASTER_CLK>,
436				<&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
437				<&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
438				<&gcc GCC_USB3_PRIM_CLKREF_CLK>,
439				<&gcc GCC_USB30_PRIM_SLEEP_CLK>,
440				<&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
441
442			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
443					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
444			assigned-clock-rates = <19200000>, <66666667>;
445
446			power-domains = <&gcc USB30_PRIM_GDSC>;
447			qcom,select-utmi-as-pipe-clk;
448			status = "disabled";
449
450			usb3_dwc3: usb@4e00000 {
451				compatible = "snps,dwc3";
452				reg = <0x04e00000 0xcd00>;
453				interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
454				phys = <&hsusb_phy1>;
455				phy-names = "usb2-phy";
456				snps,dis_u2_susphy_quirk;
457				snps,dis_enblslpm_quirk;
458				maximum-speed = "high-speed";
459				dr_mode = "peripheral";
460			};
461		};
462
463		spmi_bus: spmi@1c40000 {
464			compatible = "qcom,spmi-pmic-arb";
465			reg =	<0x01c40000 0x1100>,
466				<0x01e00000 0x2000000>,
467				<0x03e00000 0x100000>,
468				<0x03f00000 0xa0000>,
469				<0x01c0a000 0x26000>;
470			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
471			interrupt-names = "periph_irq";
472			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
473			qcom,ee = <0>;
474			qcom,channel = <0>;
475			#address-cells = <2>;
476			#size-cells = <0>;
477			interrupt-controller;
478			#interrupt-cells = <4>;
479			cell-index = <0>;
480		};
481
482		apcs_glb: mailbox@f111000 {
483			compatible = "qcom,sm6125-apcs-hmss-global";
484			reg = <0x0f111000 0x1000>;
485
486			#mbox-cells = <1>;
487		};
488
489		timer@f120000 {
490			compatible = "arm,armv7-timer-mem";
491			#address-cells = <1>;
492			#size-cells = <1>;
493			ranges;
494			reg = <0x0f120000 0x1000>;
495			clock-frequency = <19200000>;
496
497			frame@f121000 {
498				frame-number = <0>;
499				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
500						<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
501				reg = <0x0f121000 0x1000>,
502				      <0x0f122000 0x1000>;
503			};
504
505			frame@f123000 {
506				frame-number = <1>;
507				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
508				reg = <0x0f123000 0x1000>;
509				status = "disabled";
510			};
511
512			frame@f124000 {
513				frame-number = <2>;
514				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
515				reg = <0x0f124000 0x1000>;
516				status = "disabled";
517			};
518
519			frame@f125000 {
520				frame-number = <3>;
521				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
522				reg = <0x0f125000 0x1000>;
523				status = "disabled";
524			};
525
526			frame@f126000 {
527				frame-number = <4>;
528				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
529				reg = <0x0f126000 0x1000>;
530				status = "disabled";
531			};
532
533			frame@f127000 {
534				frame-number = <5>;
535				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
536				reg = <0x0f127000 0x1000>;
537				status = "disabled";
538			};
539
540			frame@f128000 {
541				frame-number = <6>;
542				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
543				reg = <0x0f128000 0x1000>;
544				status = "disabled";
545			};
546		};
547
548		intc: interrupt-controller@f200000 {
549			compatible = "arm,gic-v3";
550			reg = <0x0f200000 0x20000>,
551				<0x0f300000 0x100000>;
552			#interrupt-cells = <3>;
553			interrupt-controller;
554			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
555		};
556	};
557
558	timer {
559		compatible = "arm,armv8-timer";
560		interrupts = <GIC_PPI 1 0xf08
561				GIC_PPI 2 0xf08
562				GIC_PPI 3 0xf08
563				GIC_PPI 0 0xf08>;
564		clock-frequency = <19200000>;
565	};
566};
567