1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
2 /*
3  * f_mass_storage.c -- Mass Storage USB Composite Function
4  *
5  * Copyright (C) 2003-2008 Alan Stern
6  * Copyright (C) 2009 Samsung Electronics
7  *                    Author: Michal Nazarewicz <mina86@mina86.com>
8  * All rights reserved.
9  *
10  * Redistribution and use in source and binary forms, with or without
11  * modification, are permitted provided that the following conditions
12  * are met:
13  * 1. Redistributions of source code must retain the above copyright
14  *    notice, this list of conditions, and the following disclaimer,
15  *    without modification.
16  * 2. Redistributions in binary form must reproduce the above copyright
17  *    notice, this list of conditions and the following disclaimer in the
18  *    documentation and/or other materials provided with the distribution.
19  * 3. The names of the above-listed copyright holders may not be used
20  *    to endorse or promote products derived from this software without
21  *    specific prior written permission.
22  *
23  * ALTERNATIVELY, this software may be distributed under the terms of the
24  * GNU General Public License ("GPL") as published by the Free Software
25  * Foundation, either version 2 of that License or (at your option) any
26  * later version.
27  *
28  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
29  * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
30  * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
31  * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
32  * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
33  * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
34  * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
35  * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
36  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
37  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
38  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
39  */
40 
41 /*
42  * The Mass Storage Function acts as a USB Mass Storage device,
43  * appearing to the host as a disk drive or as a CD-ROM drive.  In
44  * addition to providing an example of a genuinely useful composite
45  * function for a USB device, it also illustrates a technique of
46  * double-buffering for increased throughput.
47  *
48  * For more information about MSF and in particular its module
49  * parameters and sysfs interface read the
50  * <Documentation/usb/mass-storage.rst> file.
51  */
52 
53 /*
54  * MSF is configured by specifying a fsg_config structure.  It has the
55  * following fields:
56  *
57  *	nluns		Number of LUNs function have (anywhere from 1
58  *				to FSG_MAX_LUNS).
59  *	luns		An array of LUN configuration values.  This
60  *				should be filled for each LUN that
61  *				function will include (ie. for "nluns"
62  *				LUNs).  Each element of the array has
63  *				the following fields:
64  *	->filename	The path to the backing file for the LUN.
65  *				Required if LUN is not marked as
66  *				removable.
67  *	->ro		Flag specifying access to the LUN shall be
68  *				read-only.  This is implied if CD-ROM
69  *				emulation is enabled as well as when
70  *				it was impossible to open "filename"
71  *				in R/W mode.
72  *	->removable	Flag specifying that LUN shall be indicated as
73  *				being removable.
74  *	->cdrom		Flag specifying that LUN shall be reported as
75  *				being a CD-ROM.
76  *	->nofua		Flag specifying that FUA flag in SCSI WRITE(10,12)
77  *				commands for this LUN shall be ignored.
78  *
79  *	vendor_name
80  *	product_name
81  *	release		Information used as a reply to INQUIRY
82  *				request.  To use default set to NULL,
83  *				NULL, 0xffff respectively.  The first
84  *				field should be 8 and the second 16
85  *				characters or less.
86  *
87  *	can_stall	Set to permit function to halt bulk endpoints.
88  *				Disabled on some USB devices known not
89  *				to work correctly.  You should set it
90  *				to true.
91  *
92  * If "removable" is not set for a LUN then a backing file must be
93  * specified.  If it is set, then NULL filename means the LUN's medium
94  * is not loaded (an empty string as "filename" in the fsg_config
95  * structure causes error).  The CD-ROM emulation includes a single
96  * data track and no audio tracks; hence there need be only one
97  * backing file per LUN.
98  *
99  * This function is heavily based on "File-backed Storage Gadget" by
100  * Alan Stern which in turn is heavily based on "Gadget Zero" by David
101  * Brownell.  The driver's SCSI command interface was based on the
102  * "Information technology - Small Computer System Interface - 2"
103  * document from X3T9.2 Project 375D, Revision 10L, 7-SEP-93,
104  * available at <http://www.t10.org/ftp/t10/drafts/s2/s2-r10l.pdf>.
105  * The single exception is opcode 0x23 (READ FORMAT CAPACITIES), which
106  * was based on the "Universal Serial Bus Mass Storage Class UFI
107  * Command Specification" document, Revision 1.0, December 14, 1998,
108  * available at
109  * <http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf>.
110  */
111 
112 /*
113  *				Driver Design
114  *
115  * The MSF is fairly straightforward.  There is a main kernel
116  * thread that handles most of the work.  Interrupt routines field
117  * callbacks from the controller driver: bulk- and interrupt-request
118  * completion notifications, endpoint-0 events, and disconnect events.
119  * Completion events are passed to the main thread by wakeup calls.  Many
120  * ep0 requests are handled at interrupt time, but SetInterface,
121  * SetConfiguration, and device reset requests are forwarded to the
122  * thread in the form of "exceptions" using SIGUSR1 signals (since they
123  * should interrupt any ongoing file I/O operations).
124  *
125  * The thread's main routine implements the standard command/data/status
126  * parts of a SCSI interaction.  It and its subroutines are full of tests
127  * for pending signals/exceptions -- all this polling is necessary since
128  * the kernel has no setjmp/longjmp equivalents.  (Maybe this is an
129  * indication that the driver really wants to be running in userspace.)
130  * An important point is that so long as the thread is alive it keeps an
131  * open reference to the backing file.  This will prevent unmounting
132  * the backing file's underlying filesystem and could cause problems
133  * during system shutdown, for example.  To prevent such problems, the
134  * thread catches INT, TERM, and KILL signals and converts them into
135  * an EXIT exception.
136  *
137  * In normal operation the main thread is started during the gadget's
138  * fsg_bind() callback and stopped during fsg_unbind().  But it can
139  * also exit when it receives a signal, and there's no point leaving
140  * the gadget running when the thread is dead.  As of this moment, MSF
141  * provides no way to deregister the gadget when thread dies -- maybe
142  * a callback functions is needed.
143  *
144  * To provide maximum throughput, the driver uses a circular pipeline of
145  * buffer heads (struct fsg_buffhd).  In principle the pipeline can be
146  * arbitrarily long; in practice the benefits don't justify having more
147  * than 2 stages (i.e., double buffering).  But it helps to think of the
148  * pipeline as being a long one.  Each buffer head contains a bulk-in and
149  * a bulk-out request pointer (since the buffer can be used for both
150  * output and input -- directions always are given from the host's
151  * point of view) as well as a pointer to the buffer and various state
152  * variables.
153  *
154  * Use of the pipeline follows a simple protocol.  There is a variable
155  * (fsg->next_buffhd_to_fill) that points to the next buffer head to use.
156  * At any time that buffer head may still be in use from an earlier
157  * request, so each buffer head has a state variable indicating whether
158  * it is EMPTY, FULL, or BUSY.  Typical use involves waiting for the
159  * buffer head to be EMPTY, filling the buffer either by file I/O or by
160  * USB I/O (during which the buffer head is BUSY), and marking the buffer
161  * head FULL when the I/O is complete.  Then the buffer will be emptied
162  * (again possibly by USB I/O, during which it is marked BUSY) and
163  * finally marked EMPTY again (possibly by a completion routine).
164  *
165  * A module parameter tells the driver to avoid stalling the bulk
166  * endpoints wherever the transport specification allows.  This is
167  * necessary for some UDCs like the SuperH, which cannot reliably clear a
168  * halt on a bulk endpoint.  However, under certain circumstances the
169  * Bulk-only specification requires a stall.  In such cases the driver
170  * will halt the endpoint and set a flag indicating that it should clear
171  * the halt in software during the next device reset.  Hopefully this
172  * will permit everything to work correctly.  Furthermore, although the
173  * specification allows the bulk-out endpoint to halt when the host sends
174  * too much data, implementing this would cause an unavoidable race.
175  * The driver will always use the "no-stall" approach for OUT transfers.
176  *
177  * One subtle point concerns sending status-stage responses for ep0
178  * requests.  Some of these requests, such as device reset, can involve
179  * interrupting an ongoing file I/O operation, which might take an
180  * arbitrarily long time.  During that delay the host might give up on
181  * the original ep0 request and issue a new one.  When that happens the
182  * driver should not notify the host about completion of the original
183  * request, as the host will no longer be waiting for it.  So the driver
184  * assigns to each ep0 request a unique tag, and it keeps track of the
185  * tag value of the request associated with a long-running exception
186  * (device-reset, interface-change, or configuration-change).  When the
187  * exception handler is finished, the status-stage response is submitted
188  * only if the current ep0 request tag is equal to the exception request
189  * tag.  Thus only the most recently received ep0 request will get a
190  * status-stage response.
191  *
192  * Warning: This driver source file is too long.  It ought to be split up
193  * into a header file plus about 3 separate .c files, to handle the details
194  * of the Gadget, USB Mass Storage, and SCSI protocols.
195  */
196 
197 
198 /* #define VERBOSE_DEBUG */
199 /* #define DUMP_MSGS */
200 
201 #include <linux/blkdev.h>
202 #include <linux/completion.h>
203 #include <linux/dcache.h>
204 #include <linux/delay.h>
205 #include <linux/device.h>
206 #include <linux/fcntl.h>
207 #include <linux/file.h>
208 #include <linux/fs.h>
209 #include <linux/kthread.h>
210 #include <linux/sched/signal.h>
211 #include <linux/limits.h>
212 #include <linux/rwsem.h>
213 #include <linux/slab.h>
214 #include <linux/spinlock.h>
215 #include <linux/string.h>
216 #include <linux/freezer.h>
217 #include <linux/module.h>
218 #include <linux/uaccess.h>
219 #include <asm/unaligned.h>
220 
221 #include <linux/usb/ch9.h>
222 #include <linux/usb/gadget.h>
223 #include <linux/usb/composite.h>
224 
225 #include <linux/nospec.h>
226 
227 #include "configfs.h"
228 
229 
230 /*------------------------------------------------------------------------*/
231 
232 #define FSG_DRIVER_DESC		"Mass Storage Function"
233 #define FSG_DRIVER_VERSION	"2009/09/11"
234 
235 static const char fsg_string_interface[] = "Mass Storage";
236 
237 #include "storage_common.h"
238 #include "f_mass_storage.h"
239 
240 /* Static strings, in UTF-8 (for simplicity we use only ASCII characters) */
241 static struct usb_string		fsg_strings[] = {
242 	{FSG_STRING_INTERFACE,		fsg_string_interface},
243 	{}
244 };
245 
246 static struct usb_gadget_strings	fsg_stringtab = {
247 	.language	= 0x0409,		/* en-us */
248 	.strings	= fsg_strings,
249 };
250 
251 static struct usb_gadget_strings *fsg_strings_array[] = {
252 	&fsg_stringtab,
253 	NULL,
254 };
255 
256 /*-------------------------------------------------------------------------*/
257 
258 struct fsg_dev;
259 struct fsg_common;
260 
261 /* Data shared by all the FSG instances. */
262 struct fsg_common {
263 	struct usb_gadget	*gadget;
264 	struct usb_composite_dev *cdev;
265 	struct fsg_dev		*fsg;
266 	wait_queue_head_t	io_wait;
267 	wait_queue_head_t	fsg_wait;
268 
269 	/* filesem protects: backing files in use */
270 	struct rw_semaphore	filesem;
271 
272 	/* lock protects: state and thread_task */
273 	spinlock_t		lock;
274 
275 	struct usb_ep		*ep0;		/* Copy of gadget->ep0 */
276 	struct usb_request	*ep0req;	/* Copy of cdev->req */
277 	unsigned int		ep0_req_tag;
278 
279 	struct fsg_buffhd	*next_buffhd_to_fill;
280 	struct fsg_buffhd	*next_buffhd_to_drain;
281 	struct fsg_buffhd	*buffhds;
282 	unsigned int		fsg_num_buffers;
283 
284 	int			cmnd_size;
285 	u8			cmnd[MAX_COMMAND_SIZE];
286 
287 	unsigned int		lun;
288 	struct fsg_lun		*luns[FSG_MAX_LUNS];
289 	struct fsg_lun		*curlun;
290 
291 	unsigned int		bulk_out_maxpacket;
292 	enum fsg_state		state;		/* For exception handling */
293 	unsigned int		exception_req_tag;
294 	void			*exception_arg;
295 
296 	enum data_direction	data_dir;
297 	u32			data_size;
298 	u32			data_size_from_cmnd;
299 	u32			tag;
300 	u32			residue;
301 	u32			usb_amount_left;
302 
303 	unsigned int		can_stall:1;
304 	unsigned int		free_storage_on_release:1;
305 	unsigned int		phase_error:1;
306 	unsigned int		short_packet_received:1;
307 	unsigned int		bad_lun_okay:1;
308 	unsigned int		running:1;
309 	unsigned int		sysfs:1;
310 
311 	struct completion	thread_notifier;
312 	struct task_struct	*thread_task;
313 
314 	/* Gadget's private data. */
315 	void			*private_data;
316 
317 	char inquiry_string[INQUIRY_STRING_LEN];
318 };
319 
320 struct fsg_dev {
321 	struct usb_function	function;
322 	struct usb_gadget	*gadget;	/* Copy of cdev->gadget */
323 	struct fsg_common	*common;
324 
325 	u16			interface_number;
326 
327 	unsigned int		bulk_in_enabled:1;
328 	unsigned int		bulk_out_enabled:1;
329 
330 	unsigned long		atomic_bitflags;
331 #define IGNORE_BULK_OUT		0
332 
333 	struct usb_ep		*bulk_in;
334 	struct usb_ep		*bulk_out;
335 };
336 
337 static inline int __fsg_is_set(struct fsg_common *common,
338 			       const char *func, unsigned line)
339 {
340 	if (common->fsg)
341 		return 1;
342 	ERROR(common, "common->fsg is NULL in %s at %u\n", func, line);
343 	WARN_ON(1);
344 	return 0;
345 }
346 
347 #define fsg_is_set(common) likely(__fsg_is_set(common, __func__, __LINE__))
348 
349 static inline struct fsg_dev *fsg_from_func(struct usb_function *f)
350 {
351 	return container_of(f, struct fsg_dev, function);
352 }
353 
354 static int exception_in_progress(struct fsg_common *common)
355 {
356 	return common->state > FSG_STATE_NORMAL;
357 }
358 
359 /* Make bulk-out requests be divisible by the maxpacket size */
360 static void set_bulk_out_req_length(struct fsg_common *common,
361 				    struct fsg_buffhd *bh, unsigned int length)
362 {
363 	unsigned int	rem;
364 
365 	bh->bulk_out_intended_length = length;
366 	rem = length % common->bulk_out_maxpacket;
367 	if (rem > 0)
368 		length += common->bulk_out_maxpacket - rem;
369 	bh->outreq->length = length;
370 }
371 
372 
373 /*-------------------------------------------------------------------------*/
374 
375 static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep)
376 {
377 	const char	*name;
378 
379 	if (ep == fsg->bulk_in)
380 		name = "bulk-in";
381 	else if (ep == fsg->bulk_out)
382 		name = "bulk-out";
383 	else
384 		name = ep->name;
385 	DBG(fsg, "%s set halt\n", name);
386 	return usb_ep_set_halt(ep);
387 }
388 
389 
390 /*-------------------------------------------------------------------------*/
391 
392 /* These routines may be called in process context or in_irq */
393 
394 static void __raise_exception(struct fsg_common *common, enum fsg_state new_state,
395 			      void *arg)
396 {
397 	unsigned long		flags;
398 
399 	/*
400 	 * Do nothing if a higher-priority exception is already in progress.
401 	 * If a lower-or-equal priority exception is in progress, preempt it
402 	 * and notify the main thread by sending it a signal.
403 	 */
404 	spin_lock_irqsave(&common->lock, flags);
405 	if (common->state <= new_state) {
406 		common->exception_req_tag = common->ep0_req_tag;
407 		common->state = new_state;
408 		common->exception_arg = arg;
409 		if (common->thread_task)
410 			send_sig_info(SIGUSR1, SEND_SIG_PRIV,
411 				      common->thread_task);
412 	}
413 	spin_unlock_irqrestore(&common->lock, flags);
414 }
415 
416 static void raise_exception(struct fsg_common *common, enum fsg_state new_state)
417 {
418 	__raise_exception(common, new_state, NULL);
419 }
420 
421 /*-------------------------------------------------------------------------*/
422 
423 static int ep0_queue(struct fsg_common *common)
424 {
425 	int	rc;
426 
427 	rc = usb_ep_queue(common->ep0, common->ep0req, GFP_ATOMIC);
428 	common->ep0->driver_data = common;
429 	if (rc != 0 && rc != -ESHUTDOWN) {
430 		/* We can't do much more than wait for a reset */
431 		WARNING(common, "error in submission: %s --> %d\n",
432 			common->ep0->name, rc);
433 	}
434 	return rc;
435 }
436 
437 
438 /*-------------------------------------------------------------------------*/
439 
440 /* Completion handlers. These always run in_irq. */
441 
442 static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req)
443 {
444 	struct fsg_common	*common = ep->driver_data;
445 	struct fsg_buffhd	*bh = req->context;
446 
447 	if (req->status || req->actual != req->length)
448 		DBG(common, "%s --> %d, %u/%u\n", __func__,
449 		    req->status, req->actual, req->length);
450 	if (req->status == -ECONNRESET)		/* Request was cancelled */
451 		usb_ep_fifo_flush(ep);
452 
453 	/* Synchronize with the smp_load_acquire() in sleep_thread() */
454 	smp_store_release(&bh->state, BUF_STATE_EMPTY);
455 	wake_up(&common->io_wait);
456 }
457 
458 static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req)
459 {
460 	struct fsg_common	*common = ep->driver_data;
461 	struct fsg_buffhd	*bh = req->context;
462 
463 	dump_msg(common, "bulk-out", req->buf, req->actual);
464 	if (req->status || req->actual != bh->bulk_out_intended_length)
465 		DBG(common, "%s --> %d, %u/%u\n", __func__,
466 		    req->status, req->actual, bh->bulk_out_intended_length);
467 	if (req->status == -ECONNRESET)		/* Request was cancelled */
468 		usb_ep_fifo_flush(ep);
469 
470 	/* Synchronize with the smp_load_acquire() in sleep_thread() */
471 	smp_store_release(&bh->state, BUF_STATE_FULL);
472 	wake_up(&common->io_wait);
473 }
474 
475 static int _fsg_common_get_max_lun(struct fsg_common *common)
476 {
477 	int i = ARRAY_SIZE(common->luns) - 1;
478 
479 	while (i >= 0 && !common->luns[i])
480 		--i;
481 
482 	return i;
483 }
484 
485 static int fsg_setup(struct usb_function *f,
486 		     const struct usb_ctrlrequest *ctrl)
487 {
488 	struct fsg_dev		*fsg = fsg_from_func(f);
489 	struct usb_request	*req = fsg->common->ep0req;
490 	u16			w_index = le16_to_cpu(ctrl->wIndex);
491 	u16			w_value = le16_to_cpu(ctrl->wValue);
492 	u16			w_length = le16_to_cpu(ctrl->wLength);
493 
494 	if (!fsg_is_set(fsg->common))
495 		return -EOPNOTSUPP;
496 
497 	++fsg->common->ep0_req_tag;	/* Record arrival of a new request */
498 	req->context = NULL;
499 	req->length = 0;
500 	dump_msg(fsg, "ep0-setup", (u8 *) ctrl, sizeof(*ctrl));
501 
502 	switch (ctrl->bRequest) {
503 
504 	case US_BULK_RESET_REQUEST:
505 		if (ctrl->bRequestType !=
506 		    (USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE))
507 			break;
508 		if (w_index != fsg->interface_number || w_value != 0 ||
509 				w_length != 0)
510 			return -EDOM;
511 
512 		/*
513 		 * Raise an exception to stop the current operation
514 		 * and reinitialize our state.
515 		 */
516 		DBG(fsg, "bulk reset request\n");
517 		raise_exception(fsg->common, FSG_STATE_PROTOCOL_RESET);
518 		return USB_GADGET_DELAYED_STATUS;
519 
520 	case US_BULK_GET_MAX_LUN:
521 		if (ctrl->bRequestType !=
522 		    (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE))
523 			break;
524 		if (w_index != fsg->interface_number || w_value != 0 ||
525 				w_length != 1)
526 			return -EDOM;
527 		VDBG(fsg, "get max LUN\n");
528 		*(u8 *)req->buf = _fsg_common_get_max_lun(fsg->common);
529 
530 		/* Respond with data/status */
531 		req->length = min((u16)1, w_length);
532 		return ep0_queue(fsg->common);
533 	}
534 
535 	VDBG(fsg,
536 	     "unknown class-specific control req %02x.%02x v%04x i%04x l%u\n",
537 	     ctrl->bRequestType, ctrl->bRequest,
538 	     le16_to_cpu(ctrl->wValue), w_index, w_length);
539 	return -EOPNOTSUPP;
540 }
541 
542 
543 /*-------------------------------------------------------------------------*/
544 
545 /* All the following routines run in process context */
546 
547 /* Use this for bulk or interrupt transfers, not ep0 */
548 static int start_transfer(struct fsg_dev *fsg, struct usb_ep *ep,
549 			   struct usb_request *req)
550 {
551 	int	rc;
552 
553 	if (ep == fsg->bulk_in)
554 		dump_msg(fsg, "bulk-in", req->buf, req->length);
555 
556 	rc = usb_ep_queue(ep, req, GFP_KERNEL);
557 	if (rc) {
558 
559 		/* We can't do much more than wait for a reset */
560 		req->status = rc;
561 
562 		/*
563 		 * Note: currently the net2280 driver fails zero-length
564 		 * submissions if DMA is enabled.
565 		 */
566 		if (rc != -ESHUTDOWN &&
567 				!(rc == -EOPNOTSUPP && req->length == 0))
568 			WARNING(fsg, "error in submission: %s --> %d\n",
569 					ep->name, rc);
570 	}
571 	return rc;
572 }
573 
574 static bool start_in_transfer(struct fsg_common *common, struct fsg_buffhd *bh)
575 {
576 	if (!fsg_is_set(common))
577 		return false;
578 	bh->state = BUF_STATE_SENDING;
579 	if (start_transfer(common->fsg, common->fsg->bulk_in, bh->inreq))
580 		bh->state = BUF_STATE_EMPTY;
581 	return true;
582 }
583 
584 static bool start_out_transfer(struct fsg_common *common, struct fsg_buffhd *bh)
585 {
586 	if (!fsg_is_set(common))
587 		return false;
588 	bh->state = BUF_STATE_RECEIVING;
589 	if (start_transfer(common->fsg, common->fsg->bulk_out, bh->outreq))
590 		bh->state = BUF_STATE_FULL;
591 	return true;
592 }
593 
594 static int sleep_thread(struct fsg_common *common, bool can_freeze,
595 		struct fsg_buffhd *bh)
596 {
597 	int	rc;
598 
599 	/* Wait until a signal arrives or bh is no longer busy */
600 	if (can_freeze)
601 		/*
602 		 * synchronize with the smp_store_release(&bh->state) in
603 		 * bulk_in_complete() or bulk_out_complete()
604 		 */
605 		rc = wait_event_freezable(common->io_wait,
606 				bh && smp_load_acquire(&bh->state) >=
607 					BUF_STATE_EMPTY);
608 	else
609 		rc = wait_event_interruptible(common->io_wait,
610 				bh && smp_load_acquire(&bh->state) >=
611 					BUF_STATE_EMPTY);
612 	return rc ? -EINTR : 0;
613 }
614 
615 
616 /*-------------------------------------------------------------------------*/
617 
618 static int do_read(struct fsg_common *common)
619 {
620 	struct fsg_lun		*curlun = common->curlun;
621 	u32			lba;
622 	struct fsg_buffhd	*bh;
623 	int			rc;
624 	u32			amount_left;
625 	loff_t			file_offset, file_offset_tmp;
626 	unsigned int		amount;
627 	ssize_t			nread;
628 
629 	/*
630 	 * Get the starting Logical Block Address and check that it's
631 	 * not too big.
632 	 */
633 	if (common->cmnd[0] == READ_6)
634 		lba = get_unaligned_be24(&common->cmnd[1]);
635 	else {
636 		lba = get_unaligned_be32(&common->cmnd[2]);
637 
638 		/*
639 		 * We allow DPO (Disable Page Out = don't save data in the
640 		 * cache) and FUA (Force Unit Access = don't read from the
641 		 * cache), but we don't implement them.
642 		 */
643 		if ((common->cmnd[1] & ~0x18) != 0) {
644 			curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
645 			return -EINVAL;
646 		}
647 	}
648 	if (lba >= curlun->num_sectors) {
649 		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
650 		return -EINVAL;
651 	}
652 	file_offset = ((loff_t) lba) << curlun->blkbits;
653 
654 	/* Carry out the file reads */
655 	amount_left = common->data_size_from_cmnd;
656 	if (unlikely(amount_left == 0))
657 		return -EIO;		/* No default reply */
658 
659 	for (;;) {
660 		/*
661 		 * Figure out how much we need to read:
662 		 * Try to read the remaining amount.
663 		 * But don't read more than the buffer size.
664 		 * And don't try to read past the end of the file.
665 		 */
666 		amount = min(amount_left, FSG_BUFLEN);
667 		amount = min((loff_t)amount,
668 			     curlun->file_length - file_offset);
669 
670 		/* Wait for the next buffer to become available */
671 		bh = common->next_buffhd_to_fill;
672 		rc = sleep_thread(common, false, bh);
673 		if (rc)
674 			return rc;
675 
676 		/*
677 		 * If we were asked to read past the end of file,
678 		 * end with an empty buffer.
679 		 */
680 		if (amount == 0) {
681 			curlun->sense_data =
682 					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
683 			curlun->sense_data_info =
684 					file_offset >> curlun->blkbits;
685 			curlun->info_valid = 1;
686 			bh->inreq->length = 0;
687 			bh->state = BUF_STATE_FULL;
688 			break;
689 		}
690 
691 		/* Perform the read */
692 		file_offset_tmp = file_offset;
693 		nread = kernel_read(curlun->filp, bh->buf, amount,
694 				&file_offset_tmp);
695 		VLDBG(curlun, "file read %u @ %llu -> %d\n", amount,
696 		      (unsigned long long)file_offset, (int)nread);
697 		if (signal_pending(current))
698 			return -EINTR;
699 
700 		if (nread < 0) {
701 			LDBG(curlun, "error in file read: %d\n", (int)nread);
702 			nread = 0;
703 		} else if (nread < amount) {
704 			LDBG(curlun, "partial file read: %d/%u\n",
705 			     (int)nread, amount);
706 			nread = round_down(nread, curlun->blksize);
707 		}
708 		file_offset  += nread;
709 		amount_left  -= nread;
710 		common->residue -= nread;
711 
712 		/*
713 		 * Except at the end of the transfer, nread will be
714 		 * equal to the buffer size, which is divisible by the
715 		 * bulk-in maxpacket size.
716 		 */
717 		bh->inreq->length = nread;
718 		bh->state = BUF_STATE_FULL;
719 
720 		/* If an error occurred, report it and its position */
721 		if (nread < amount) {
722 			curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
723 			curlun->sense_data_info =
724 					file_offset >> curlun->blkbits;
725 			curlun->info_valid = 1;
726 			break;
727 		}
728 
729 		if (amount_left == 0)
730 			break;		/* No more left to read */
731 
732 		/* Send this buffer and go read some more */
733 		bh->inreq->zero = 0;
734 		if (!start_in_transfer(common, bh))
735 			/* Don't know what to do if common->fsg is NULL */
736 			return -EIO;
737 		common->next_buffhd_to_fill = bh->next;
738 	}
739 
740 	return -EIO;		/* No default reply */
741 }
742 
743 
744 /*-------------------------------------------------------------------------*/
745 
746 static int do_write(struct fsg_common *common)
747 {
748 	struct fsg_lun		*curlun = common->curlun;
749 	u32			lba;
750 	struct fsg_buffhd	*bh;
751 	int			get_some_more;
752 	u32			amount_left_to_req, amount_left_to_write;
753 	loff_t			usb_offset, file_offset, file_offset_tmp;
754 	unsigned int		amount;
755 	ssize_t			nwritten;
756 	int			rc;
757 
758 	if (curlun->ro) {
759 		curlun->sense_data = SS_WRITE_PROTECTED;
760 		return -EINVAL;
761 	}
762 	spin_lock(&curlun->filp->f_lock);
763 	curlun->filp->f_flags &= ~O_SYNC;	/* Default is not to wait */
764 	spin_unlock(&curlun->filp->f_lock);
765 
766 	/*
767 	 * Get the starting Logical Block Address and check that it's
768 	 * not too big
769 	 */
770 	if (common->cmnd[0] == WRITE_6)
771 		lba = get_unaligned_be24(&common->cmnd[1]);
772 	else {
773 		lba = get_unaligned_be32(&common->cmnd[2]);
774 
775 		/*
776 		 * We allow DPO (Disable Page Out = don't save data in the
777 		 * cache) and FUA (Force Unit Access = write directly to the
778 		 * medium).  We don't implement DPO; we implement FUA by
779 		 * performing synchronous output.
780 		 */
781 		if (common->cmnd[1] & ~0x18) {
782 			curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
783 			return -EINVAL;
784 		}
785 		if (!curlun->nofua && (common->cmnd[1] & 0x08)) { /* FUA */
786 			spin_lock(&curlun->filp->f_lock);
787 			curlun->filp->f_flags |= O_SYNC;
788 			spin_unlock(&curlun->filp->f_lock);
789 		}
790 	}
791 	if (lba >= curlun->num_sectors) {
792 		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
793 		return -EINVAL;
794 	}
795 
796 	/* Carry out the file writes */
797 	get_some_more = 1;
798 	file_offset = usb_offset = ((loff_t) lba) << curlun->blkbits;
799 	amount_left_to_req = common->data_size_from_cmnd;
800 	amount_left_to_write = common->data_size_from_cmnd;
801 
802 	while (amount_left_to_write > 0) {
803 
804 		/* Queue a request for more data from the host */
805 		bh = common->next_buffhd_to_fill;
806 		if (bh->state == BUF_STATE_EMPTY && get_some_more) {
807 
808 			/*
809 			 * Figure out how much we want to get:
810 			 * Try to get the remaining amount,
811 			 * but not more than the buffer size.
812 			 */
813 			amount = min(amount_left_to_req, FSG_BUFLEN);
814 
815 			/* Beyond the end of the backing file? */
816 			if (usb_offset >= curlun->file_length) {
817 				get_some_more = 0;
818 				curlun->sense_data =
819 					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
820 				curlun->sense_data_info =
821 					usb_offset >> curlun->blkbits;
822 				curlun->info_valid = 1;
823 				continue;
824 			}
825 
826 			/* Get the next buffer */
827 			usb_offset += amount;
828 			common->usb_amount_left -= amount;
829 			amount_left_to_req -= amount;
830 			if (amount_left_to_req == 0)
831 				get_some_more = 0;
832 
833 			/*
834 			 * Except at the end of the transfer, amount will be
835 			 * equal to the buffer size, which is divisible by
836 			 * the bulk-out maxpacket size.
837 			 */
838 			set_bulk_out_req_length(common, bh, amount);
839 			if (!start_out_transfer(common, bh))
840 				/* Dunno what to do if common->fsg is NULL */
841 				return -EIO;
842 			common->next_buffhd_to_fill = bh->next;
843 			continue;
844 		}
845 
846 		/* Write the received data to the backing file */
847 		bh = common->next_buffhd_to_drain;
848 		if (bh->state == BUF_STATE_EMPTY && !get_some_more)
849 			break;			/* We stopped early */
850 
851 		/* Wait for the data to be received */
852 		rc = sleep_thread(common, false, bh);
853 		if (rc)
854 			return rc;
855 
856 		common->next_buffhd_to_drain = bh->next;
857 		bh->state = BUF_STATE_EMPTY;
858 
859 		/* Did something go wrong with the transfer? */
860 		if (bh->outreq->status != 0) {
861 			curlun->sense_data = SS_COMMUNICATION_FAILURE;
862 			curlun->sense_data_info =
863 					file_offset >> curlun->blkbits;
864 			curlun->info_valid = 1;
865 			break;
866 		}
867 
868 		amount = bh->outreq->actual;
869 		if (curlun->file_length - file_offset < amount) {
870 			LERROR(curlun, "write %u @ %llu beyond end %llu\n",
871 				       amount, (unsigned long long)file_offset,
872 				       (unsigned long long)curlun->file_length);
873 			amount = curlun->file_length - file_offset;
874 		}
875 
876 		/*
877 		 * Don't accept excess data.  The spec doesn't say
878 		 * what to do in this case.  We'll ignore the error.
879 		 */
880 		amount = min(amount, bh->bulk_out_intended_length);
881 
882 		/* Don't write a partial block */
883 		amount = round_down(amount, curlun->blksize);
884 		if (amount == 0)
885 			goto empty_write;
886 
887 		/* Perform the write */
888 		file_offset_tmp = file_offset;
889 		nwritten = kernel_write(curlun->filp, bh->buf, amount,
890 				&file_offset_tmp);
891 		VLDBG(curlun, "file write %u @ %llu -> %d\n", amount,
892 				(unsigned long long)file_offset, (int)nwritten);
893 		if (signal_pending(current))
894 			return -EINTR;		/* Interrupted! */
895 
896 		if (nwritten < 0) {
897 			LDBG(curlun, "error in file write: %d\n",
898 					(int) nwritten);
899 			nwritten = 0;
900 		} else if (nwritten < amount) {
901 			LDBG(curlun, "partial file write: %d/%u\n",
902 					(int) nwritten, amount);
903 			nwritten = round_down(nwritten, curlun->blksize);
904 		}
905 		file_offset += nwritten;
906 		amount_left_to_write -= nwritten;
907 		common->residue -= nwritten;
908 
909 		/* If an error occurred, report it and its position */
910 		if (nwritten < amount) {
911 			curlun->sense_data = SS_WRITE_ERROR;
912 			curlun->sense_data_info =
913 					file_offset >> curlun->blkbits;
914 			curlun->info_valid = 1;
915 			break;
916 		}
917 
918  empty_write:
919 		/* Did the host decide to stop early? */
920 		if (bh->outreq->actual < bh->bulk_out_intended_length) {
921 			common->short_packet_received = 1;
922 			break;
923 		}
924 	}
925 
926 	return -EIO;		/* No default reply */
927 }
928 
929 
930 /*-------------------------------------------------------------------------*/
931 
932 static int do_synchronize_cache(struct fsg_common *common)
933 {
934 	struct fsg_lun	*curlun = common->curlun;
935 	int		rc;
936 
937 	/* We ignore the requested LBA and write out all file's
938 	 * dirty data buffers. */
939 	rc = fsg_lun_fsync_sub(curlun);
940 	if (rc)
941 		curlun->sense_data = SS_WRITE_ERROR;
942 	return 0;
943 }
944 
945 
946 /*-------------------------------------------------------------------------*/
947 
948 static void invalidate_sub(struct fsg_lun *curlun)
949 {
950 	struct file	*filp = curlun->filp;
951 	struct inode	*inode = file_inode(filp);
952 	unsigned long	rc;
953 
954 	rc = invalidate_mapping_pages(inode->i_mapping, 0, -1);
955 	VLDBG(curlun, "invalidate_mapping_pages -> %ld\n", rc);
956 }
957 
958 static int do_verify(struct fsg_common *common)
959 {
960 	struct fsg_lun		*curlun = common->curlun;
961 	u32			lba;
962 	u32			verification_length;
963 	struct fsg_buffhd	*bh = common->next_buffhd_to_fill;
964 	loff_t			file_offset, file_offset_tmp;
965 	u32			amount_left;
966 	unsigned int		amount;
967 	ssize_t			nread;
968 
969 	/*
970 	 * Get the starting Logical Block Address and check that it's
971 	 * not too big.
972 	 */
973 	lba = get_unaligned_be32(&common->cmnd[2]);
974 	if (lba >= curlun->num_sectors) {
975 		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
976 		return -EINVAL;
977 	}
978 
979 	/*
980 	 * We allow DPO (Disable Page Out = don't save data in the
981 	 * cache) but we don't implement it.
982 	 */
983 	if (common->cmnd[1] & ~0x10) {
984 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
985 		return -EINVAL;
986 	}
987 
988 	verification_length = get_unaligned_be16(&common->cmnd[7]);
989 	if (unlikely(verification_length == 0))
990 		return -EIO;		/* No default reply */
991 
992 	/* Prepare to carry out the file verify */
993 	amount_left = verification_length << curlun->blkbits;
994 	file_offset = ((loff_t) lba) << curlun->blkbits;
995 
996 	/* Write out all the dirty buffers before invalidating them */
997 	fsg_lun_fsync_sub(curlun);
998 	if (signal_pending(current))
999 		return -EINTR;
1000 
1001 	invalidate_sub(curlun);
1002 	if (signal_pending(current))
1003 		return -EINTR;
1004 
1005 	/* Just try to read the requested blocks */
1006 	while (amount_left > 0) {
1007 		/*
1008 		 * Figure out how much we need to read:
1009 		 * Try to read the remaining amount, but not more than
1010 		 * the buffer size.
1011 		 * And don't try to read past the end of the file.
1012 		 */
1013 		amount = min(amount_left, FSG_BUFLEN);
1014 		amount = min((loff_t)amount,
1015 			     curlun->file_length - file_offset);
1016 		if (amount == 0) {
1017 			curlun->sense_data =
1018 					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
1019 			curlun->sense_data_info =
1020 				file_offset >> curlun->blkbits;
1021 			curlun->info_valid = 1;
1022 			break;
1023 		}
1024 
1025 		/* Perform the read */
1026 		file_offset_tmp = file_offset;
1027 		nread = kernel_read(curlun->filp, bh->buf, amount,
1028 				&file_offset_tmp);
1029 		VLDBG(curlun, "file read %u @ %llu -> %d\n", amount,
1030 				(unsigned long long) file_offset,
1031 				(int) nread);
1032 		if (signal_pending(current))
1033 			return -EINTR;
1034 
1035 		if (nread < 0) {
1036 			LDBG(curlun, "error in file verify: %d\n", (int)nread);
1037 			nread = 0;
1038 		} else if (nread < amount) {
1039 			LDBG(curlun, "partial file verify: %d/%u\n",
1040 			     (int)nread, amount);
1041 			nread = round_down(nread, curlun->blksize);
1042 		}
1043 		if (nread == 0) {
1044 			curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
1045 			curlun->sense_data_info =
1046 				file_offset >> curlun->blkbits;
1047 			curlun->info_valid = 1;
1048 			break;
1049 		}
1050 		file_offset += nread;
1051 		amount_left -= nread;
1052 	}
1053 	return 0;
1054 }
1055 
1056 
1057 /*-------------------------------------------------------------------------*/
1058 
1059 static int do_inquiry(struct fsg_common *common, struct fsg_buffhd *bh)
1060 {
1061 	struct fsg_lun *curlun = common->curlun;
1062 	u8	*buf = (u8 *) bh->buf;
1063 
1064 	if (!curlun) {		/* Unsupported LUNs are okay */
1065 		common->bad_lun_okay = 1;
1066 		memset(buf, 0, 36);
1067 		buf[0] = TYPE_NO_LUN;	/* Unsupported, no device-type */
1068 		buf[4] = 31;		/* Additional length */
1069 		return 36;
1070 	}
1071 
1072 	buf[0] = curlun->cdrom ? TYPE_ROM : TYPE_DISK;
1073 	buf[1] = curlun->removable ? 0x80 : 0;
1074 	buf[2] = 2;		/* ANSI SCSI level 2 */
1075 	buf[3] = 2;		/* SCSI-2 INQUIRY data format */
1076 	buf[4] = 31;		/* Additional length */
1077 	buf[5] = 0;		/* No special options */
1078 	buf[6] = 0;
1079 	buf[7] = 0;
1080 	if (curlun->inquiry_string[0])
1081 		memcpy(buf + 8, curlun->inquiry_string,
1082 		       sizeof(curlun->inquiry_string));
1083 	else
1084 		memcpy(buf + 8, common->inquiry_string,
1085 		       sizeof(common->inquiry_string));
1086 	return 36;
1087 }
1088 
1089 static int do_request_sense(struct fsg_common *common, struct fsg_buffhd *bh)
1090 {
1091 	struct fsg_lun	*curlun = common->curlun;
1092 	u8		*buf = (u8 *) bh->buf;
1093 	u32		sd, sdinfo;
1094 	int		valid;
1095 
1096 	/*
1097 	 * From the SCSI-2 spec., section 7.9 (Unit attention condition):
1098 	 *
1099 	 * If a REQUEST SENSE command is received from an initiator
1100 	 * with a pending unit attention condition (before the target
1101 	 * generates the contingent allegiance condition), then the
1102 	 * target shall either:
1103 	 *   a) report any pending sense data and preserve the unit
1104 	 *	attention condition on the logical unit, or,
1105 	 *   b) report the unit attention condition, may discard any
1106 	 *	pending sense data, and clear the unit attention
1107 	 *	condition on the logical unit for that initiator.
1108 	 *
1109 	 * FSG normally uses option a); enable this code to use option b).
1110 	 */
1111 #if 0
1112 	if (curlun && curlun->unit_attention_data != SS_NO_SENSE) {
1113 		curlun->sense_data = curlun->unit_attention_data;
1114 		curlun->unit_attention_data = SS_NO_SENSE;
1115 	}
1116 #endif
1117 
1118 	if (!curlun) {		/* Unsupported LUNs are okay */
1119 		common->bad_lun_okay = 1;
1120 		sd = SS_LOGICAL_UNIT_NOT_SUPPORTED;
1121 		sdinfo = 0;
1122 		valid = 0;
1123 	} else {
1124 		sd = curlun->sense_data;
1125 		sdinfo = curlun->sense_data_info;
1126 		valid = curlun->info_valid << 7;
1127 		curlun->sense_data = SS_NO_SENSE;
1128 		curlun->sense_data_info = 0;
1129 		curlun->info_valid = 0;
1130 	}
1131 
1132 	memset(buf, 0, 18);
1133 	buf[0] = valid | 0x70;			/* Valid, current error */
1134 	buf[2] = SK(sd);
1135 	put_unaligned_be32(sdinfo, &buf[3]);	/* Sense information */
1136 	buf[7] = 18 - 8;			/* Additional sense length */
1137 	buf[12] = ASC(sd);
1138 	buf[13] = ASCQ(sd);
1139 	return 18;
1140 }
1141 
1142 static int do_read_capacity(struct fsg_common *common, struct fsg_buffhd *bh)
1143 {
1144 	struct fsg_lun	*curlun = common->curlun;
1145 	u32		lba = get_unaligned_be32(&common->cmnd[2]);
1146 	int		pmi = common->cmnd[8];
1147 	u8		*buf = (u8 *)bh->buf;
1148 
1149 	/* Check the PMI and LBA fields */
1150 	if (pmi > 1 || (pmi == 0 && lba != 0)) {
1151 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1152 		return -EINVAL;
1153 	}
1154 
1155 	put_unaligned_be32(curlun->num_sectors - 1, &buf[0]);
1156 						/* Max logical block */
1157 	put_unaligned_be32(curlun->blksize, &buf[4]);/* Block length */
1158 	return 8;
1159 }
1160 
1161 static int do_read_header(struct fsg_common *common, struct fsg_buffhd *bh)
1162 {
1163 	struct fsg_lun	*curlun = common->curlun;
1164 	int		msf = common->cmnd[1] & 0x02;
1165 	u32		lba = get_unaligned_be32(&common->cmnd[2]);
1166 	u8		*buf = (u8 *)bh->buf;
1167 
1168 	if (common->cmnd[1] & ~0x02) {		/* Mask away MSF */
1169 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1170 		return -EINVAL;
1171 	}
1172 	if (lba >= curlun->num_sectors) {
1173 		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
1174 		return -EINVAL;
1175 	}
1176 
1177 	memset(buf, 0, 8);
1178 	buf[0] = 0x01;		/* 2048 bytes of user data, rest is EC */
1179 	store_cdrom_address(&buf[4], msf, lba);
1180 	return 8;
1181 }
1182 
1183 static int do_read_toc(struct fsg_common *common, struct fsg_buffhd *bh)
1184 {
1185 	struct fsg_lun	*curlun = common->curlun;
1186 	int		msf = common->cmnd[1] & 0x02;
1187 	int		start_track = common->cmnd[6];
1188 	u8		*buf = (u8 *)bh->buf;
1189 
1190 	if ((common->cmnd[1] & ~0x02) != 0 ||	/* Mask away MSF */
1191 			start_track > 1) {
1192 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1193 		return -EINVAL;
1194 	}
1195 
1196 	memset(buf, 0, 20);
1197 	buf[1] = (20-2);		/* TOC data length */
1198 	buf[2] = 1;			/* First track number */
1199 	buf[3] = 1;			/* Last track number */
1200 	buf[5] = 0x16;			/* Data track, copying allowed */
1201 	buf[6] = 0x01;			/* Only track is number 1 */
1202 	store_cdrom_address(&buf[8], msf, 0);
1203 
1204 	buf[13] = 0x16;			/* Lead-out track is data */
1205 	buf[14] = 0xAA;			/* Lead-out track number */
1206 	store_cdrom_address(&buf[16], msf, curlun->num_sectors);
1207 	return 20;
1208 }
1209 
1210 static int do_mode_sense(struct fsg_common *common, struct fsg_buffhd *bh)
1211 {
1212 	struct fsg_lun	*curlun = common->curlun;
1213 	int		mscmnd = common->cmnd[0];
1214 	u8		*buf = (u8 *) bh->buf;
1215 	u8		*buf0 = buf;
1216 	int		pc, page_code;
1217 	int		changeable_values, all_pages;
1218 	int		valid_page = 0;
1219 	int		len, limit;
1220 
1221 	if ((common->cmnd[1] & ~0x08) != 0) {	/* Mask away DBD */
1222 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1223 		return -EINVAL;
1224 	}
1225 	pc = common->cmnd[2] >> 6;
1226 	page_code = common->cmnd[2] & 0x3f;
1227 	if (pc == 3) {
1228 		curlun->sense_data = SS_SAVING_PARAMETERS_NOT_SUPPORTED;
1229 		return -EINVAL;
1230 	}
1231 	changeable_values = (pc == 1);
1232 	all_pages = (page_code == 0x3f);
1233 
1234 	/*
1235 	 * Write the mode parameter header.  Fixed values are: default
1236 	 * medium type, no cache control (DPOFUA), and no block descriptors.
1237 	 * The only variable value is the WriteProtect bit.  We will fill in
1238 	 * the mode data length later.
1239 	 */
1240 	memset(buf, 0, 8);
1241 	if (mscmnd == MODE_SENSE) {
1242 		buf[2] = (curlun->ro ? 0x80 : 0x00);		/* WP, DPOFUA */
1243 		buf += 4;
1244 		limit = 255;
1245 	} else {			/* MODE_SENSE_10 */
1246 		buf[3] = (curlun->ro ? 0x80 : 0x00);		/* WP, DPOFUA */
1247 		buf += 8;
1248 		limit = 65535;		/* Should really be FSG_BUFLEN */
1249 	}
1250 
1251 	/* No block descriptors */
1252 
1253 	/*
1254 	 * The mode pages, in numerical order.  The only page we support
1255 	 * is the Caching page.
1256 	 */
1257 	if (page_code == 0x08 || all_pages) {
1258 		valid_page = 1;
1259 		buf[0] = 0x08;		/* Page code */
1260 		buf[1] = 10;		/* Page length */
1261 		memset(buf+2, 0, 10);	/* None of the fields are changeable */
1262 
1263 		if (!changeable_values) {
1264 			buf[2] = 0x04;	/* Write cache enable, */
1265 					/* Read cache not disabled */
1266 					/* No cache retention priorities */
1267 			put_unaligned_be16(0xffff, &buf[4]);
1268 					/* Don't disable prefetch */
1269 					/* Minimum prefetch = 0 */
1270 			put_unaligned_be16(0xffff, &buf[8]);
1271 					/* Maximum prefetch */
1272 			put_unaligned_be16(0xffff, &buf[10]);
1273 					/* Maximum prefetch ceiling */
1274 		}
1275 		buf += 12;
1276 	}
1277 
1278 	/*
1279 	 * Check that a valid page was requested and the mode data length
1280 	 * isn't too long.
1281 	 */
1282 	len = buf - buf0;
1283 	if (!valid_page || len > limit) {
1284 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1285 		return -EINVAL;
1286 	}
1287 
1288 	/*  Store the mode data length */
1289 	if (mscmnd == MODE_SENSE)
1290 		buf0[0] = len - 1;
1291 	else
1292 		put_unaligned_be16(len - 2, buf0);
1293 	return len;
1294 }
1295 
1296 static int do_start_stop(struct fsg_common *common)
1297 {
1298 	struct fsg_lun	*curlun = common->curlun;
1299 	int		loej, start;
1300 
1301 	if (!curlun) {
1302 		return -EINVAL;
1303 	} else if (!curlun->removable) {
1304 		curlun->sense_data = SS_INVALID_COMMAND;
1305 		return -EINVAL;
1306 	} else if ((common->cmnd[1] & ~0x01) != 0 || /* Mask away Immed */
1307 		   (common->cmnd[4] & ~0x03) != 0) { /* Mask LoEj, Start */
1308 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1309 		return -EINVAL;
1310 	}
1311 
1312 	loej  = common->cmnd[4] & 0x02;
1313 	start = common->cmnd[4] & 0x01;
1314 
1315 	/*
1316 	 * Our emulation doesn't support mounting; the medium is
1317 	 * available for use as soon as it is loaded.
1318 	 */
1319 	if (start) {
1320 		if (!fsg_lun_is_open(curlun)) {
1321 			curlun->sense_data = SS_MEDIUM_NOT_PRESENT;
1322 			return -EINVAL;
1323 		}
1324 		return 0;
1325 	}
1326 
1327 	/* Are we allowed to unload the media? */
1328 	if (curlun->prevent_medium_removal) {
1329 		LDBG(curlun, "unload attempt prevented\n");
1330 		curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED;
1331 		return -EINVAL;
1332 	}
1333 
1334 	if (!loej)
1335 		return 0;
1336 
1337 	up_read(&common->filesem);
1338 	down_write(&common->filesem);
1339 	fsg_lun_close(curlun);
1340 	up_write(&common->filesem);
1341 	down_read(&common->filesem);
1342 
1343 	return 0;
1344 }
1345 
1346 static int do_prevent_allow(struct fsg_common *common)
1347 {
1348 	struct fsg_lun	*curlun = common->curlun;
1349 	int		prevent;
1350 
1351 	if (!common->curlun) {
1352 		return -EINVAL;
1353 	} else if (!common->curlun->removable) {
1354 		common->curlun->sense_data = SS_INVALID_COMMAND;
1355 		return -EINVAL;
1356 	}
1357 
1358 	prevent = common->cmnd[4] & 0x01;
1359 	if ((common->cmnd[4] & ~0x01) != 0) {	/* Mask away Prevent */
1360 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1361 		return -EINVAL;
1362 	}
1363 
1364 	if (curlun->prevent_medium_removal && !prevent)
1365 		fsg_lun_fsync_sub(curlun);
1366 	curlun->prevent_medium_removal = prevent;
1367 	return 0;
1368 }
1369 
1370 static int do_read_format_capacities(struct fsg_common *common,
1371 			struct fsg_buffhd *bh)
1372 {
1373 	struct fsg_lun	*curlun = common->curlun;
1374 	u8		*buf = (u8 *) bh->buf;
1375 
1376 	buf[0] = buf[1] = buf[2] = 0;
1377 	buf[3] = 8;	/* Only the Current/Maximum Capacity Descriptor */
1378 	buf += 4;
1379 
1380 	put_unaligned_be32(curlun->num_sectors, &buf[0]);
1381 						/* Number of blocks */
1382 	put_unaligned_be32(curlun->blksize, &buf[4]);/* Block length */
1383 	buf[4] = 0x02;				/* Current capacity */
1384 	return 12;
1385 }
1386 
1387 static int do_mode_select(struct fsg_common *common, struct fsg_buffhd *bh)
1388 {
1389 	struct fsg_lun	*curlun = common->curlun;
1390 
1391 	/* We don't support MODE SELECT */
1392 	if (curlun)
1393 		curlun->sense_data = SS_INVALID_COMMAND;
1394 	return -EINVAL;
1395 }
1396 
1397 
1398 /*-------------------------------------------------------------------------*/
1399 
1400 static int halt_bulk_in_endpoint(struct fsg_dev *fsg)
1401 {
1402 	int	rc;
1403 
1404 	rc = fsg_set_halt(fsg, fsg->bulk_in);
1405 	if (rc == -EAGAIN)
1406 		VDBG(fsg, "delayed bulk-in endpoint halt\n");
1407 	while (rc != 0) {
1408 		if (rc != -EAGAIN) {
1409 			WARNING(fsg, "usb_ep_set_halt -> %d\n", rc);
1410 			rc = 0;
1411 			break;
1412 		}
1413 
1414 		/* Wait for a short time and then try again */
1415 		if (msleep_interruptible(100) != 0)
1416 			return -EINTR;
1417 		rc = usb_ep_set_halt(fsg->bulk_in);
1418 	}
1419 	return rc;
1420 }
1421 
1422 static int wedge_bulk_in_endpoint(struct fsg_dev *fsg)
1423 {
1424 	int	rc;
1425 
1426 	DBG(fsg, "bulk-in set wedge\n");
1427 	rc = usb_ep_set_wedge(fsg->bulk_in);
1428 	if (rc == -EAGAIN)
1429 		VDBG(fsg, "delayed bulk-in endpoint wedge\n");
1430 	while (rc != 0) {
1431 		if (rc != -EAGAIN) {
1432 			WARNING(fsg, "usb_ep_set_wedge -> %d\n", rc);
1433 			rc = 0;
1434 			break;
1435 		}
1436 
1437 		/* Wait for a short time and then try again */
1438 		if (msleep_interruptible(100) != 0)
1439 			return -EINTR;
1440 		rc = usb_ep_set_wedge(fsg->bulk_in);
1441 	}
1442 	return rc;
1443 }
1444 
1445 static int throw_away_data(struct fsg_common *common)
1446 {
1447 	struct fsg_buffhd	*bh, *bh2;
1448 	u32			amount;
1449 	int			rc;
1450 
1451 	for (bh = common->next_buffhd_to_drain;
1452 	     bh->state != BUF_STATE_EMPTY || common->usb_amount_left > 0;
1453 	     bh = common->next_buffhd_to_drain) {
1454 
1455 		/* Try to submit another request if we need one */
1456 		bh2 = common->next_buffhd_to_fill;
1457 		if (bh2->state == BUF_STATE_EMPTY &&
1458 				common->usb_amount_left > 0) {
1459 			amount = min(common->usb_amount_left, FSG_BUFLEN);
1460 
1461 			/*
1462 			 * Except at the end of the transfer, amount will be
1463 			 * equal to the buffer size, which is divisible by
1464 			 * the bulk-out maxpacket size.
1465 			 */
1466 			set_bulk_out_req_length(common, bh2, amount);
1467 			if (!start_out_transfer(common, bh2))
1468 				/* Dunno what to do if common->fsg is NULL */
1469 				return -EIO;
1470 			common->next_buffhd_to_fill = bh2->next;
1471 			common->usb_amount_left -= amount;
1472 			continue;
1473 		}
1474 
1475 		/* Wait for the data to be received */
1476 		rc = sleep_thread(common, false, bh);
1477 		if (rc)
1478 			return rc;
1479 
1480 		/* Throw away the data in a filled buffer */
1481 		bh->state = BUF_STATE_EMPTY;
1482 		common->next_buffhd_to_drain = bh->next;
1483 
1484 		/* A short packet or an error ends everything */
1485 		if (bh->outreq->actual < bh->bulk_out_intended_length ||
1486 				bh->outreq->status != 0) {
1487 			raise_exception(common, FSG_STATE_ABORT_BULK_OUT);
1488 			return -EINTR;
1489 		}
1490 	}
1491 	return 0;
1492 }
1493 
1494 static int finish_reply(struct fsg_common *common)
1495 {
1496 	struct fsg_buffhd	*bh = common->next_buffhd_to_fill;
1497 	int			rc = 0;
1498 
1499 	switch (common->data_dir) {
1500 	case DATA_DIR_NONE:
1501 		break;			/* Nothing to send */
1502 
1503 	/*
1504 	 * If we don't know whether the host wants to read or write,
1505 	 * this must be CB or CBI with an unknown command.  We mustn't
1506 	 * try to send or receive any data.  So stall both bulk pipes
1507 	 * if we can and wait for a reset.
1508 	 */
1509 	case DATA_DIR_UNKNOWN:
1510 		if (!common->can_stall) {
1511 			/* Nothing */
1512 		} else if (fsg_is_set(common)) {
1513 			fsg_set_halt(common->fsg, common->fsg->bulk_out);
1514 			rc = halt_bulk_in_endpoint(common->fsg);
1515 		} else {
1516 			/* Don't know what to do if common->fsg is NULL */
1517 			rc = -EIO;
1518 		}
1519 		break;
1520 
1521 	/* All but the last buffer of data must have already been sent */
1522 	case DATA_DIR_TO_HOST:
1523 		if (common->data_size == 0) {
1524 			/* Nothing to send */
1525 
1526 		/* Don't know what to do if common->fsg is NULL */
1527 		} else if (!fsg_is_set(common)) {
1528 			rc = -EIO;
1529 
1530 		/* If there's no residue, simply send the last buffer */
1531 		} else if (common->residue == 0) {
1532 			bh->inreq->zero = 0;
1533 			if (!start_in_transfer(common, bh))
1534 				return -EIO;
1535 			common->next_buffhd_to_fill = bh->next;
1536 
1537 		/*
1538 		 * For Bulk-only, mark the end of the data with a short
1539 		 * packet.  If we are allowed to stall, halt the bulk-in
1540 		 * endpoint.  (Note: This violates the Bulk-Only Transport
1541 		 * specification, which requires us to pad the data if we
1542 		 * don't halt the endpoint.  Presumably nobody will mind.)
1543 		 */
1544 		} else {
1545 			bh->inreq->zero = 1;
1546 			if (!start_in_transfer(common, bh))
1547 				rc = -EIO;
1548 			common->next_buffhd_to_fill = bh->next;
1549 			if (common->can_stall)
1550 				rc = halt_bulk_in_endpoint(common->fsg);
1551 		}
1552 		break;
1553 
1554 	/*
1555 	 * We have processed all we want from the data the host has sent.
1556 	 * There may still be outstanding bulk-out requests.
1557 	 */
1558 	case DATA_DIR_FROM_HOST:
1559 		if (common->residue == 0) {
1560 			/* Nothing to receive */
1561 
1562 		/* Did the host stop sending unexpectedly early? */
1563 		} else if (common->short_packet_received) {
1564 			raise_exception(common, FSG_STATE_ABORT_BULK_OUT);
1565 			rc = -EINTR;
1566 
1567 		/*
1568 		 * We haven't processed all the incoming data.  Even though
1569 		 * we may be allowed to stall, doing so would cause a race.
1570 		 * The controller may already have ACK'ed all the remaining
1571 		 * bulk-out packets, in which case the host wouldn't see a
1572 		 * STALL.  Not realizing the endpoint was halted, it wouldn't
1573 		 * clear the halt -- leading to problems later on.
1574 		 */
1575 #if 0
1576 		} else if (common->can_stall) {
1577 			if (fsg_is_set(common))
1578 				fsg_set_halt(common->fsg,
1579 					     common->fsg->bulk_out);
1580 			raise_exception(common, FSG_STATE_ABORT_BULK_OUT);
1581 			rc = -EINTR;
1582 #endif
1583 
1584 		/*
1585 		 * We can't stall.  Read in the excess data and throw it
1586 		 * all away.
1587 		 */
1588 		} else {
1589 			rc = throw_away_data(common);
1590 		}
1591 		break;
1592 	}
1593 	return rc;
1594 }
1595 
1596 static void send_status(struct fsg_common *common)
1597 {
1598 	struct fsg_lun		*curlun = common->curlun;
1599 	struct fsg_buffhd	*bh;
1600 	struct bulk_cs_wrap	*csw;
1601 	int			rc;
1602 	u8			status = US_BULK_STAT_OK;
1603 	u32			sd, sdinfo = 0;
1604 
1605 	/* Wait for the next buffer to become available */
1606 	bh = common->next_buffhd_to_fill;
1607 	rc = sleep_thread(common, false, bh);
1608 	if (rc)
1609 		return;
1610 
1611 	if (curlun) {
1612 		sd = curlun->sense_data;
1613 		sdinfo = curlun->sense_data_info;
1614 	} else if (common->bad_lun_okay)
1615 		sd = SS_NO_SENSE;
1616 	else
1617 		sd = SS_LOGICAL_UNIT_NOT_SUPPORTED;
1618 
1619 	if (common->phase_error) {
1620 		DBG(common, "sending phase-error status\n");
1621 		status = US_BULK_STAT_PHASE;
1622 		sd = SS_INVALID_COMMAND;
1623 	} else if (sd != SS_NO_SENSE) {
1624 		DBG(common, "sending command-failure status\n");
1625 		status = US_BULK_STAT_FAIL;
1626 		VDBG(common, "  sense data: SK x%02x, ASC x%02x, ASCQ x%02x;"
1627 				"  info x%x\n",
1628 				SK(sd), ASC(sd), ASCQ(sd), sdinfo);
1629 	}
1630 
1631 	/* Store and send the Bulk-only CSW */
1632 	csw = (void *)bh->buf;
1633 
1634 	csw->Signature = cpu_to_le32(US_BULK_CS_SIGN);
1635 	csw->Tag = common->tag;
1636 	csw->Residue = cpu_to_le32(common->residue);
1637 	csw->Status = status;
1638 
1639 	bh->inreq->length = US_BULK_CS_WRAP_LEN;
1640 	bh->inreq->zero = 0;
1641 	if (!start_in_transfer(common, bh))
1642 		/* Don't know what to do if common->fsg is NULL */
1643 		return;
1644 
1645 	common->next_buffhd_to_fill = bh->next;
1646 	return;
1647 }
1648 
1649 
1650 /*-------------------------------------------------------------------------*/
1651 
1652 /*
1653  * Check whether the command is properly formed and whether its data size
1654  * and direction agree with the values we already have.
1655  */
1656 static int check_command(struct fsg_common *common, int cmnd_size,
1657 			 enum data_direction data_dir, unsigned int mask,
1658 			 int needs_medium, const char *name)
1659 {
1660 	int			i;
1661 	unsigned int		lun = common->cmnd[1] >> 5;
1662 	static const char	dirletter[4] = {'u', 'o', 'i', 'n'};
1663 	char			hdlen[20];
1664 	struct fsg_lun		*curlun;
1665 
1666 	hdlen[0] = 0;
1667 	if (common->data_dir != DATA_DIR_UNKNOWN)
1668 		sprintf(hdlen, ", H%c=%u", dirletter[(int) common->data_dir],
1669 			common->data_size);
1670 	VDBG(common, "SCSI command: %s;  Dc=%d, D%c=%u;  Hc=%d%s\n",
1671 	     name, cmnd_size, dirletter[(int) data_dir],
1672 	     common->data_size_from_cmnd, common->cmnd_size, hdlen);
1673 
1674 	/*
1675 	 * We can't reply at all until we know the correct data direction
1676 	 * and size.
1677 	 */
1678 	if (common->data_size_from_cmnd == 0)
1679 		data_dir = DATA_DIR_NONE;
1680 	if (common->data_size < common->data_size_from_cmnd) {
1681 		/*
1682 		 * Host data size < Device data size is a phase error.
1683 		 * Carry out the command, but only transfer as much as
1684 		 * we are allowed.
1685 		 */
1686 		common->data_size_from_cmnd = common->data_size;
1687 		common->phase_error = 1;
1688 	}
1689 	common->residue = common->data_size;
1690 	common->usb_amount_left = common->data_size;
1691 
1692 	/* Conflicting data directions is a phase error */
1693 	if (common->data_dir != data_dir && common->data_size_from_cmnd > 0) {
1694 		common->phase_error = 1;
1695 		return -EINVAL;
1696 	}
1697 
1698 	/* Verify the length of the command itself */
1699 	if (cmnd_size != common->cmnd_size) {
1700 
1701 		/*
1702 		 * Special case workaround: There are plenty of buggy SCSI
1703 		 * implementations. Many have issues with cbw->Length
1704 		 * field passing a wrong command size. For those cases we
1705 		 * always try to work around the problem by using the length
1706 		 * sent by the host side provided it is at least as large
1707 		 * as the correct command length.
1708 		 * Examples of such cases would be MS-Windows, which issues
1709 		 * REQUEST SENSE with cbw->Length == 12 where it should
1710 		 * be 6, and xbox360 issuing INQUIRY, TEST UNIT READY and
1711 		 * REQUEST SENSE with cbw->Length == 10 where it should
1712 		 * be 6 as well.
1713 		 */
1714 		if (cmnd_size <= common->cmnd_size) {
1715 			DBG(common, "%s is buggy! Expected length %d "
1716 			    "but we got %d\n", name,
1717 			    cmnd_size, common->cmnd_size);
1718 			cmnd_size = common->cmnd_size;
1719 		} else {
1720 			common->phase_error = 1;
1721 			return -EINVAL;
1722 		}
1723 	}
1724 
1725 	/* Check that the LUN values are consistent */
1726 	if (common->lun != lun)
1727 		DBG(common, "using LUN %u from CBW, not LUN %u from CDB\n",
1728 		    common->lun, lun);
1729 
1730 	/* Check the LUN */
1731 	curlun = common->curlun;
1732 	if (curlun) {
1733 		if (common->cmnd[0] != REQUEST_SENSE) {
1734 			curlun->sense_data = SS_NO_SENSE;
1735 			curlun->sense_data_info = 0;
1736 			curlun->info_valid = 0;
1737 		}
1738 	} else {
1739 		common->bad_lun_okay = 0;
1740 
1741 		/*
1742 		 * INQUIRY and REQUEST SENSE commands are explicitly allowed
1743 		 * to use unsupported LUNs; all others may not.
1744 		 */
1745 		if (common->cmnd[0] != INQUIRY &&
1746 		    common->cmnd[0] != REQUEST_SENSE) {
1747 			DBG(common, "unsupported LUN %u\n", common->lun);
1748 			return -EINVAL;
1749 		}
1750 	}
1751 
1752 	/*
1753 	 * If a unit attention condition exists, only INQUIRY and
1754 	 * REQUEST SENSE commands are allowed; anything else must fail.
1755 	 */
1756 	if (curlun && curlun->unit_attention_data != SS_NO_SENSE &&
1757 	    common->cmnd[0] != INQUIRY &&
1758 	    common->cmnd[0] != REQUEST_SENSE) {
1759 		curlun->sense_data = curlun->unit_attention_data;
1760 		curlun->unit_attention_data = SS_NO_SENSE;
1761 		return -EINVAL;
1762 	}
1763 
1764 	/* Check that only command bytes listed in the mask are non-zero */
1765 	common->cmnd[1] &= 0x1f;			/* Mask away the LUN */
1766 	for (i = 1; i < cmnd_size; ++i) {
1767 		if (common->cmnd[i] && !(mask & (1 << i))) {
1768 			if (curlun)
1769 				curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1770 			return -EINVAL;
1771 		}
1772 	}
1773 
1774 	/* If the medium isn't mounted and the command needs to access
1775 	 * it, return an error. */
1776 	if (curlun && !fsg_lun_is_open(curlun) && needs_medium) {
1777 		curlun->sense_data = SS_MEDIUM_NOT_PRESENT;
1778 		return -EINVAL;
1779 	}
1780 
1781 	return 0;
1782 }
1783 
1784 /* wrapper of check_command for data size in blocks handling */
1785 static int check_command_size_in_blocks(struct fsg_common *common,
1786 		int cmnd_size, enum data_direction data_dir,
1787 		unsigned int mask, int needs_medium, const char *name)
1788 {
1789 	if (common->curlun)
1790 		common->data_size_from_cmnd <<= common->curlun->blkbits;
1791 	return check_command(common, cmnd_size, data_dir,
1792 			mask, needs_medium, name);
1793 }
1794 
1795 static int do_scsi_command(struct fsg_common *common)
1796 {
1797 	struct fsg_buffhd	*bh;
1798 	int			rc;
1799 	int			reply = -EINVAL;
1800 	int			i;
1801 	static char		unknown[16];
1802 
1803 	dump_cdb(common);
1804 
1805 	/* Wait for the next buffer to become available for data or status */
1806 	bh = common->next_buffhd_to_fill;
1807 	common->next_buffhd_to_drain = bh;
1808 	rc = sleep_thread(common, false, bh);
1809 	if (rc)
1810 		return rc;
1811 
1812 	common->phase_error = 0;
1813 	common->short_packet_received = 0;
1814 
1815 	down_read(&common->filesem);	/* We're using the backing file */
1816 	switch (common->cmnd[0]) {
1817 
1818 	case INQUIRY:
1819 		common->data_size_from_cmnd = common->cmnd[4];
1820 		reply = check_command(common, 6, DATA_DIR_TO_HOST,
1821 				      (1<<4), 0,
1822 				      "INQUIRY");
1823 		if (reply == 0)
1824 			reply = do_inquiry(common, bh);
1825 		break;
1826 
1827 	case MODE_SELECT:
1828 		common->data_size_from_cmnd = common->cmnd[4];
1829 		reply = check_command(common, 6, DATA_DIR_FROM_HOST,
1830 				      (1<<1) | (1<<4), 0,
1831 				      "MODE SELECT(6)");
1832 		if (reply == 0)
1833 			reply = do_mode_select(common, bh);
1834 		break;
1835 
1836 	case MODE_SELECT_10:
1837 		common->data_size_from_cmnd =
1838 			get_unaligned_be16(&common->cmnd[7]);
1839 		reply = check_command(common, 10, DATA_DIR_FROM_HOST,
1840 				      (1<<1) | (3<<7), 0,
1841 				      "MODE SELECT(10)");
1842 		if (reply == 0)
1843 			reply = do_mode_select(common, bh);
1844 		break;
1845 
1846 	case MODE_SENSE:
1847 		common->data_size_from_cmnd = common->cmnd[4];
1848 		reply = check_command(common, 6, DATA_DIR_TO_HOST,
1849 				      (1<<1) | (1<<2) | (1<<4), 0,
1850 				      "MODE SENSE(6)");
1851 		if (reply == 0)
1852 			reply = do_mode_sense(common, bh);
1853 		break;
1854 
1855 	case MODE_SENSE_10:
1856 		common->data_size_from_cmnd =
1857 			get_unaligned_be16(&common->cmnd[7]);
1858 		reply = check_command(common, 10, DATA_DIR_TO_HOST,
1859 				      (1<<1) | (1<<2) | (3<<7), 0,
1860 				      "MODE SENSE(10)");
1861 		if (reply == 0)
1862 			reply = do_mode_sense(common, bh);
1863 		break;
1864 
1865 	case ALLOW_MEDIUM_REMOVAL:
1866 		common->data_size_from_cmnd = 0;
1867 		reply = check_command(common, 6, DATA_DIR_NONE,
1868 				      (1<<4), 0,
1869 				      "PREVENT-ALLOW MEDIUM REMOVAL");
1870 		if (reply == 0)
1871 			reply = do_prevent_allow(common);
1872 		break;
1873 
1874 	case READ_6:
1875 		i = common->cmnd[4];
1876 		common->data_size_from_cmnd = (i == 0) ? 256 : i;
1877 		reply = check_command_size_in_blocks(common, 6,
1878 				      DATA_DIR_TO_HOST,
1879 				      (7<<1) | (1<<4), 1,
1880 				      "READ(6)");
1881 		if (reply == 0)
1882 			reply = do_read(common);
1883 		break;
1884 
1885 	case READ_10:
1886 		common->data_size_from_cmnd =
1887 				get_unaligned_be16(&common->cmnd[7]);
1888 		reply = check_command_size_in_blocks(common, 10,
1889 				      DATA_DIR_TO_HOST,
1890 				      (1<<1) | (0xf<<2) | (3<<7), 1,
1891 				      "READ(10)");
1892 		if (reply == 0)
1893 			reply = do_read(common);
1894 		break;
1895 
1896 	case READ_12:
1897 		common->data_size_from_cmnd =
1898 				get_unaligned_be32(&common->cmnd[6]);
1899 		reply = check_command_size_in_blocks(common, 12,
1900 				      DATA_DIR_TO_HOST,
1901 				      (1<<1) | (0xf<<2) | (0xf<<6), 1,
1902 				      "READ(12)");
1903 		if (reply == 0)
1904 			reply = do_read(common);
1905 		break;
1906 
1907 	case READ_CAPACITY:
1908 		common->data_size_from_cmnd = 8;
1909 		reply = check_command(common, 10, DATA_DIR_TO_HOST,
1910 				      (0xf<<2) | (1<<8), 1,
1911 				      "READ CAPACITY");
1912 		if (reply == 0)
1913 			reply = do_read_capacity(common, bh);
1914 		break;
1915 
1916 	case READ_HEADER:
1917 		if (!common->curlun || !common->curlun->cdrom)
1918 			goto unknown_cmnd;
1919 		common->data_size_from_cmnd =
1920 			get_unaligned_be16(&common->cmnd[7]);
1921 		reply = check_command(common, 10, DATA_DIR_TO_HOST,
1922 				      (3<<7) | (0x1f<<1), 1,
1923 				      "READ HEADER");
1924 		if (reply == 0)
1925 			reply = do_read_header(common, bh);
1926 		break;
1927 
1928 	case READ_TOC:
1929 		if (!common->curlun || !common->curlun->cdrom)
1930 			goto unknown_cmnd;
1931 		common->data_size_from_cmnd =
1932 			get_unaligned_be16(&common->cmnd[7]);
1933 		reply = check_command(common, 10, DATA_DIR_TO_HOST,
1934 				      (7<<6) | (1<<1), 1,
1935 				      "READ TOC");
1936 		if (reply == 0)
1937 			reply = do_read_toc(common, bh);
1938 		break;
1939 
1940 	case READ_FORMAT_CAPACITIES:
1941 		common->data_size_from_cmnd =
1942 			get_unaligned_be16(&common->cmnd[7]);
1943 		reply = check_command(common, 10, DATA_DIR_TO_HOST,
1944 				      (3<<7), 1,
1945 				      "READ FORMAT CAPACITIES");
1946 		if (reply == 0)
1947 			reply = do_read_format_capacities(common, bh);
1948 		break;
1949 
1950 	case REQUEST_SENSE:
1951 		common->data_size_from_cmnd = common->cmnd[4];
1952 		reply = check_command(common, 6, DATA_DIR_TO_HOST,
1953 				      (1<<4), 0,
1954 				      "REQUEST SENSE");
1955 		if (reply == 0)
1956 			reply = do_request_sense(common, bh);
1957 		break;
1958 
1959 	case START_STOP:
1960 		common->data_size_from_cmnd = 0;
1961 		reply = check_command(common, 6, DATA_DIR_NONE,
1962 				      (1<<1) | (1<<4), 0,
1963 				      "START-STOP UNIT");
1964 		if (reply == 0)
1965 			reply = do_start_stop(common);
1966 		break;
1967 
1968 	case SYNCHRONIZE_CACHE:
1969 		common->data_size_from_cmnd = 0;
1970 		reply = check_command(common, 10, DATA_DIR_NONE,
1971 				      (0xf<<2) | (3<<7), 1,
1972 				      "SYNCHRONIZE CACHE");
1973 		if (reply == 0)
1974 			reply = do_synchronize_cache(common);
1975 		break;
1976 
1977 	case TEST_UNIT_READY:
1978 		common->data_size_from_cmnd = 0;
1979 		reply = check_command(common, 6, DATA_DIR_NONE,
1980 				0, 1,
1981 				"TEST UNIT READY");
1982 		break;
1983 
1984 	/*
1985 	 * Although optional, this command is used by MS-Windows.  We
1986 	 * support a minimal version: BytChk must be 0.
1987 	 */
1988 	case VERIFY:
1989 		common->data_size_from_cmnd = 0;
1990 		reply = check_command(common, 10, DATA_DIR_NONE,
1991 				      (1<<1) | (0xf<<2) | (3<<7), 1,
1992 				      "VERIFY");
1993 		if (reply == 0)
1994 			reply = do_verify(common);
1995 		break;
1996 
1997 	case WRITE_6:
1998 		i = common->cmnd[4];
1999 		common->data_size_from_cmnd = (i == 0) ? 256 : i;
2000 		reply = check_command_size_in_blocks(common, 6,
2001 				      DATA_DIR_FROM_HOST,
2002 				      (7<<1) | (1<<4), 1,
2003 				      "WRITE(6)");
2004 		if (reply == 0)
2005 			reply = do_write(common);
2006 		break;
2007 
2008 	case WRITE_10:
2009 		common->data_size_from_cmnd =
2010 				get_unaligned_be16(&common->cmnd[7]);
2011 		reply = check_command_size_in_blocks(common, 10,
2012 				      DATA_DIR_FROM_HOST,
2013 				      (1<<1) | (0xf<<2) | (3<<7), 1,
2014 				      "WRITE(10)");
2015 		if (reply == 0)
2016 			reply = do_write(common);
2017 		break;
2018 
2019 	case WRITE_12:
2020 		common->data_size_from_cmnd =
2021 				get_unaligned_be32(&common->cmnd[6]);
2022 		reply = check_command_size_in_blocks(common, 12,
2023 				      DATA_DIR_FROM_HOST,
2024 				      (1<<1) | (0xf<<2) | (0xf<<6), 1,
2025 				      "WRITE(12)");
2026 		if (reply == 0)
2027 			reply = do_write(common);
2028 		break;
2029 
2030 	/*
2031 	 * Some mandatory commands that we recognize but don't implement.
2032 	 * They don't mean much in this setting.  It's left as an exercise
2033 	 * for anyone interested to implement RESERVE and RELEASE in terms
2034 	 * of Posix locks.
2035 	 */
2036 	case FORMAT_UNIT:
2037 	case RELEASE:
2038 	case RESERVE:
2039 	case SEND_DIAGNOSTIC:
2040 
2041 	default:
2042 unknown_cmnd:
2043 		common->data_size_from_cmnd = 0;
2044 		sprintf(unknown, "Unknown x%02x", common->cmnd[0]);
2045 		reply = check_command(common, common->cmnd_size,
2046 				      DATA_DIR_UNKNOWN, ~0, 0, unknown);
2047 		if (reply == 0) {
2048 			common->curlun->sense_data = SS_INVALID_COMMAND;
2049 			reply = -EINVAL;
2050 		}
2051 		break;
2052 	}
2053 	up_read(&common->filesem);
2054 
2055 	if (reply == -EINTR || signal_pending(current))
2056 		return -EINTR;
2057 
2058 	/* Set up the single reply buffer for finish_reply() */
2059 	if (reply == -EINVAL)
2060 		reply = 0;		/* Error reply length */
2061 	if (reply >= 0 && common->data_dir == DATA_DIR_TO_HOST) {
2062 		reply = min((u32)reply, common->data_size_from_cmnd);
2063 		bh->inreq->length = reply;
2064 		bh->state = BUF_STATE_FULL;
2065 		common->residue -= reply;
2066 	}				/* Otherwise it's already set */
2067 
2068 	return 0;
2069 }
2070 
2071 
2072 /*-------------------------------------------------------------------------*/
2073 
2074 static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
2075 {
2076 	struct usb_request	*req = bh->outreq;
2077 	struct bulk_cb_wrap	*cbw = req->buf;
2078 	struct fsg_common	*common = fsg->common;
2079 
2080 	/* Was this a real packet?  Should it be ignored? */
2081 	if (req->status || test_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags))
2082 		return -EINVAL;
2083 
2084 	/* Is the CBW valid? */
2085 	if (req->actual != US_BULK_CB_WRAP_LEN ||
2086 			cbw->Signature != cpu_to_le32(
2087 				US_BULK_CB_SIGN)) {
2088 		DBG(fsg, "invalid CBW: len %u sig 0x%x\n",
2089 				req->actual,
2090 				le32_to_cpu(cbw->Signature));
2091 
2092 		/*
2093 		 * The Bulk-only spec says we MUST stall the IN endpoint
2094 		 * (6.6.1), so it's unavoidable.  It also says we must
2095 		 * retain this state until the next reset, but there's
2096 		 * no way to tell the controller driver it should ignore
2097 		 * Clear-Feature(HALT) requests.
2098 		 *
2099 		 * We aren't required to halt the OUT endpoint; instead
2100 		 * we can simply accept and discard any data received
2101 		 * until the next reset.
2102 		 */
2103 		wedge_bulk_in_endpoint(fsg);
2104 		set_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
2105 		return -EINVAL;
2106 	}
2107 
2108 	/* Is the CBW meaningful? */
2109 	if (cbw->Lun >= ARRAY_SIZE(common->luns) ||
2110 	    cbw->Flags & ~US_BULK_FLAG_IN || cbw->Length <= 0 ||
2111 	    cbw->Length > MAX_COMMAND_SIZE) {
2112 		DBG(fsg, "non-meaningful CBW: lun = %u, flags = 0x%x, "
2113 				"cmdlen %u\n",
2114 				cbw->Lun, cbw->Flags, cbw->Length);
2115 
2116 		/*
2117 		 * We can do anything we want here, so let's stall the
2118 		 * bulk pipes if we are allowed to.
2119 		 */
2120 		if (common->can_stall) {
2121 			fsg_set_halt(fsg, fsg->bulk_out);
2122 			halt_bulk_in_endpoint(fsg);
2123 		}
2124 		return -EINVAL;
2125 	}
2126 
2127 	/* Save the command for later */
2128 	common->cmnd_size = cbw->Length;
2129 	memcpy(common->cmnd, cbw->CDB, common->cmnd_size);
2130 	if (cbw->Flags & US_BULK_FLAG_IN)
2131 		common->data_dir = DATA_DIR_TO_HOST;
2132 	else
2133 		common->data_dir = DATA_DIR_FROM_HOST;
2134 	common->data_size = le32_to_cpu(cbw->DataTransferLength);
2135 	if (common->data_size == 0)
2136 		common->data_dir = DATA_DIR_NONE;
2137 	common->lun = cbw->Lun;
2138 	if (common->lun < ARRAY_SIZE(common->luns))
2139 		common->curlun = common->luns[common->lun];
2140 	else
2141 		common->curlun = NULL;
2142 	common->tag = cbw->Tag;
2143 	return 0;
2144 }
2145 
2146 static int get_next_command(struct fsg_common *common)
2147 {
2148 	struct fsg_buffhd	*bh;
2149 	int			rc = 0;
2150 
2151 	/* Wait for the next buffer to become available */
2152 	bh = common->next_buffhd_to_fill;
2153 	rc = sleep_thread(common, true, bh);
2154 	if (rc)
2155 		return rc;
2156 
2157 	/* Queue a request to read a Bulk-only CBW */
2158 	set_bulk_out_req_length(common, bh, US_BULK_CB_WRAP_LEN);
2159 	if (!start_out_transfer(common, bh))
2160 		/* Don't know what to do if common->fsg is NULL */
2161 		return -EIO;
2162 
2163 	/*
2164 	 * We will drain the buffer in software, which means we
2165 	 * can reuse it for the next filling.  No need to advance
2166 	 * next_buffhd_to_fill.
2167 	 */
2168 
2169 	/* Wait for the CBW to arrive */
2170 	rc = sleep_thread(common, true, bh);
2171 	if (rc)
2172 		return rc;
2173 
2174 	rc = fsg_is_set(common) ? received_cbw(common->fsg, bh) : -EIO;
2175 	bh->state = BUF_STATE_EMPTY;
2176 
2177 	return rc;
2178 }
2179 
2180 
2181 /*-------------------------------------------------------------------------*/
2182 
2183 static int alloc_request(struct fsg_common *common, struct usb_ep *ep,
2184 		struct usb_request **preq)
2185 {
2186 	*preq = usb_ep_alloc_request(ep, GFP_ATOMIC);
2187 	if (*preq)
2188 		return 0;
2189 	ERROR(common, "can't allocate request for %s\n", ep->name);
2190 	return -ENOMEM;
2191 }
2192 
2193 /* Reset interface setting and re-init endpoint state (toggle etc). */
2194 static int do_set_interface(struct fsg_common *common, struct fsg_dev *new_fsg)
2195 {
2196 	struct fsg_dev *fsg;
2197 	int i, rc = 0;
2198 
2199 	if (common->running)
2200 		DBG(common, "reset interface\n");
2201 
2202 reset:
2203 	/* Deallocate the requests */
2204 	if (common->fsg) {
2205 		fsg = common->fsg;
2206 
2207 		for (i = 0; i < common->fsg_num_buffers; ++i) {
2208 			struct fsg_buffhd *bh = &common->buffhds[i];
2209 
2210 			if (bh->inreq) {
2211 				usb_ep_free_request(fsg->bulk_in, bh->inreq);
2212 				bh->inreq = NULL;
2213 			}
2214 			if (bh->outreq) {
2215 				usb_ep_free_request(fsg->bulk_out, bh->outreq);
2216 				bh->outreq = NULL;
2217 			}
2218 		}
2219 
2220 		/* Disable the endpoints */
2221 		if (fsg->bulk_in_enabled) {
2222 			usb_ep_disable(fsg->bulk_in);
2223 			fsg->bulk_in_enabled = 0;
2224 		}
2225 		if (fsg->bulk_out_enabled) {
2226 			usb_ep_disable(fsg->bulk_out);
2227 			fsg->bulk_out_enabled = 0;
2228 		}
2229 
2230 		common->fsg = NULL;
2231 		wake_up(&common->fsg_wait);
2232 	}
2233 
2234 	common->running = 0;
2235 	if (!new_fsg || rc)
2236 		return rc;
2237 
2238 	common->fsg = new_fsg;
2239 	fsg = common->fsg;
2240 
2241 	/* Enable the endpoints */
2242 	rc = config_ep_by_speed(common->gadget, &(fsg->function), fsg->bulk_in);
2243 	if (rc)
2244 		goto reset;
2245 	rc = usb_ep_enable(fsg->bulk_in);
2246 	if (rc)
2247 		goto reset;
2248 	fsg->bulk_in->driver_data = common;
2249 	fsg->bulk_in_enabled = 1;
2250 
2251 	rc = config_ep_by_speed(common->gadget, &(fsg->function),
2252 				fsg->bulk_out);
2253 	if (rc)
2254 		goto reset;
2255 	rc = usb_ep_enable(fsg->bulk_out);
2256 	if (rc)
2257 		goto reset;
2258 	fsg->bulk_out->driver_data = common;
2259 	fsg->bulk_out_enabled = 1;
2260 	common->bulk_out_maxpacket = usb_endpoint_maxp(fsg->bulk_out->desc);
2261 	clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
2262 
2263 	/* Allocate the requests */
2264 	for (i = 0; i < common->fsg_num_buffers; ++i) {
2265 		struct fsg_buffhd	*bh = &common->buffhds[i];
2266 
2267 		rc = alloc_request(common, fsg->bulk_in, &bh->inreq);
2268 		if (rc)
2269 			goto reset;
2270 		rc = alloc_request(common, fsg->bulk_out, &bh->outreq);
2271 		if (rc)
2272 			goto reset;
2273 		bh->inreq->buf = bh->outreq->buf = bh->buf;
2274 		bh->inreq->context = bh->outreq->context = bh;
2275 		bh->inreq->complete = bulk_in_complete;
2276 		bh->outreq->complete = bulk_out_complete;
2277 	}
2278 
2279 	common->running = 1;
2280 	for (i = 0; i < ARRAY_SIZE(common->luns); ++i)
2281 		if (common->luns[i])
2282 			common->luns[i]->unit_attention_data =
2283 				SS_RESET_OCCURRED;
2284 	return rc;
2285 }
2286 
2287 
2288 /****************************** ALT CONFIGS ******************************/
2289 
2290 static int fsg_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
2291 {
2292 	struct fsg_dev *fsg = fsg_from_func(f);
2293 
2294 	__raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE, fsg);
2295 	return USB_GADGET_DELAYED_STATUS;
2296 }
2297 
2298 static void fsg_disable(struct usb_function *f)
2299 {
2300 	struct fsg_dev *fsg = fsg_from_func(f);
2301 
2302 	__raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE, NULL);
2303 }
2304 
2305 
2306 /*-------------------------------------------------------------------------*/
2307 
2308 static void handle_exception(struct fsg_common *common)
2309 {
2310 	int			i;
2311 	struct fsg_buffhd	*bh;
2312 	enum fsg_state		old_state;
2313 	struct fsg_lun		*curlun;
2314 	unsigned int		exception_req_tag;
2315 	struct fsg_dev		*new_fsg;
2316 
2317 	/*
2318 	 * Clear the existing signals.  Anything but SIGUSR1 is converted
2319 	 * into a high-priority EXIT exception.
2320 	 */
2321 	for (;;) {
2322 		int sig = kernel_dequeue_signal();
2323 		if (!sig)
2324 			break;
2325 		if (sig != SIGUSR1) {
2326 			spin_lock_irq(&common->lock);
2327 			if (common->state < FSG_STATE_EXIT)
2328 				DBG(common, "Main thread exiting on signal\n");
2329 			common->state = FSG_STATE_EXIT;
2330 			spin_unlock_irq(&common->lock);
2331 		}
2332 	}
2333 
2334 	/* Cancel all the pending transfers */
2335 	if (likely(common->fsg)) {
2336 		for (i = 0; i < common->fsg_num_buffers; ++i) {
2337 			bh = &common->buffhds[i];
2338 			if (bh->state == BUF_STATE_SENDING)
2339 				usb_ep_dequeue(common->fsg->bulk_in, bh->inreq);
2340 			if (bh->state == BUF_STATE_RECEIVING)
2341 				usb_ep_dequeue(common->fsg->bulk_out,
2342 					       bh->outreq);
2343 
2344 			/* Wait for a transfer to become idle */
2345 			if (sleep_thread(common, false, bh))
2346 				return;
2347 		}
2348 
2349 		/* Clear out the controller's fifos */
2350 		if (common->fsg->bulk_in_enabled)
2351 			usb_ep_fifo_flush(common->fsg->bulk_in);
2352 		if (common->fsg->bulk_out_enabled)
2353 			usb_ep_fifo_flush(common->fsg->bulk_out);
2354 	}
2355 
2356 	/*
2357 	 * Reset the I/O buffer states and pointers, the SCSI
2358 	 * state, and the exception.  Then invoke the handler.
2359 	 */
2360 	spin_lock_irq(&common->lock);
2361 
2362 	for (i = 0; i < common->fsg_num_buffers; ++i) {
2363 		bh = &common->buffhds[i];
2364 		bh->state = BUF_STATE_EMPTY;
2365 	}
2366 	common->next_buffhd_to_fill = &common->buffhds[0];
2367 	common->next_buffhd_to_drain = &common->buffhds[0];
2368 	exception_req_tag = common->exception_req_tag;
2369 	new_fsg = common->exception_arg;
2370 	old_state = common->state;
2371 	common->state = FSG_STATE_NORMAL;
2372 
2373 	if (old_state != FSG_STATE_ABORT_BULK_OUT) {
2374 		for (i = 0; i < ARRAY_SIZE(common->luns); ++i) {
2375 			curlun = common->luns[i];
2376 			if (!curlun)
2377 				continue;
2378 			curlun->prevent_medium_removal = 0;
2379 			curlun->sense_data = SS_NO_SENSE;
2380 			curlun->unit_attention_data = SS_NO_SENSE;
2381 			curlun->sense_data_info = 0;
2382 			curlun->info_valid = 0;
2383 		}
2384 	}
2385 	spin_unlock_irq(&common->lock);
2386 
2387 	/* Carry out any extra actions required for the exception */
2388 	switch (old_state) {
2389 	case FSG_STATE_NORMAL:
2390 		break;
2391 
2392 	case FSG_STATE_ABORT_BULK_OUT:
2393 		send_status(common);
2394 		break;
2395 
2396 	case FSG_STATE_PROTOCOL_RESET:
2397 		/*
2398 		 * In case we were forced against our will to halt a
2399 		 * bulk endpoint, clear the halt now.  (The SuperH UDC
2400 		 * requires this.)
2401 		 */
2402 		if (!fsg_is_set(common))
2403 			break;
2404 		if (test_and_clear_bit(IGNORE_BULK_OUT,
2405 				       &common->fsg->atomic_bitflags))
2406 			usb_ep_clear_halt(common->fsg->bulk_in);
2407 
2408 		if (common->ep0_req_tag == exception_req_tag)
2409 			ep0_queue(common);	/* Complete the status stage */
2410 
2411 		/*
2412 		 * Technically this should go here, but it would only be
2413 		 * a waste of time.  Ditto for the INTERFACE_CHANGE and
2414 		 * CONFIG_CHANGE cases.
2415 		 */
2416 		/* for (i = 0; i < common->ARRAY_SIZE(common->luns); ++i) */
2417 		/*	if (common->luns[i]) */
2418 		/*		common->luns[i]->unit_attention_data = */
2419 		/*			SS_RESET_OCCURRED;  */
2420 		break;
2421 
2422 	case FSG_STATE_CONFIG_CHANGE:
2423 		do_set_interface(common, new_fsg);
2424 		if (new_fsg)
2425 			usb_composite_setup_continue(common->cdev);
2426 		break;
2427 
2428 	case FSG_STATE_EXIT:
2429 		do_set_interface(common, NULL);		/* Free resources */
2430 		spin_lock_irq(&common->lock);
2431 		common->state = FSG_STATE_TERMINATED;	/* Stop the thread */
2432 		spin_unlock_irq(&common->lock);
2433 		break;
2434 
2435 	case FSG_STATE_TERMINATED:
2436 		break;
2437 	}
2438 }
2439 
2440 
2441 /*-------------------------------------------------------------------------*/
2442 
2443 static int fsg_main_thread(void *common_)
2444 {
2445 	struct fsg_common	*common = common_;
2446 	int			i;
2447 
2448 	/*
2449 	 * Allow the thread to be killed by a signal, but set the signal mask
2450 	 * to block everything but INT, TERM, KILL, and USR1.
2451 	 */
2452 	allow_signal(SIGINT);
2453 	allow_signal(SIGTERM);
2454 	allow_signal(SIGKILL);
2455 	allow_signal(SIGUSR1);
2456 
2457 	/* Allow the thread to be frozen */
2458 	set_freezable();
2459 
2460 	/* The main loop */
2461 	while (common->state != FSG_STATE_TERMINATED) {
2462 		if (exception_in_progress(common) || signal_pending(current)) {
2463 			handle_exception(common);
2464 			continue;
2465 		}
2466 
2467 		if (!common->running) {
2468 			sleep_thread(common, true, NULL);
2469 			continue;
2470 		}
2471 
2472 		if (get_next_command(common) || exception_in_progress(common))
2473 			continue;
2474 		if (do_scsi_command(common) || exception_in_progress(common))
2475 			continue;
2476 		if (finish_reply(common) || exception_in_progress(common))
2477 			continue;
2478 		send_status(common);
2479 	}
2480 
2481 	spin_lock_irq(&common->lock);
2482 	common->thread_task = NULL;
2483 	spin_unlock_irq(&common->lock);
2484 
2485 	/* Eject media from all LUNs */
2486 
2487 	down_write(&common->filesem);
2488 	for (i = 0; i < ARRAY_SIZE(common->luns); i++) {
2489 		struct fsg_lun *curlun = common->luns[i];
2490 
2491 		if (curlun && fsg_lun_is_open(curlun))
2492 			fsg_lun_close(curlun);
2493 	}
2494 	up_write(&common->filesem);
2495 
2496 	/* Let fsg_unbind() know the thread has exited */
2497 	complete_and_exit(&common->thread_notifier, 0);
2498 }
2499 
2500 
2501 /*************************** DEVICE ATTRIBUTES ***************************/
2502 
2503 static ssize_t ro_show(struct device *dev, struct device_attribute *attr, char *buf)
2504 {
2505 	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
2506 
2507 	return fsg_show_ro(curlun, buf);
2508 }
2509 
2510 static ssize_t nofua_show(struct device *dev, struct device_attribute *attr,
2511 			  char *buf)
2512 {
2513 	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
2514 
2515 	return fsg_show_nofua(curlun, buf);
2516 }
2517 
2518 static ssize_t file_show(struct device *dev, struct device_attribute *attr,
2519 			 char *buf)
2520 {
2521 	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
2522 	struct rw_semaphore	*filesem = dev_get_drvdata(dev);
2523 
2524 	return fsg_show_file(curlun, filesem, buf);
2525 }
2526 
2527 static ssize_t ro_store(struct device *dev, struct device_attribute *attr,
2528 			const char *buf, size_t count)
2529 {
2530 	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
2531 	struct rw_semaphore	*filesem = dev_get_drvdata(dev);
2532 
2533 	return fsg_store_ro(curlun, filesem, buf, count);
2534 }
2535 
2536 static ssize_t nofua_store(struct device *dev, struct device_attribute *attr,
2537 			   const char *buf, size_t count)
2538 {
2539 	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
2540 
2541 	return fsg_store_nofua(curlun, buf, count);
2542 }
2543 
2544 static ssize_t file_store(struct device *dev, struct device_attribute *attr,
2545 			  const char *buf, size_t count)
2546 {
2547 	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
2548 	struct rw_semaphore	*filesem = dev_get_drvdata(dev);
2549 
2550 	return fsg_store_file(curlun, filesem, buf, count);
2551 }
2552 
2553 static DEVICE_ATTR_RW(nofua);
2554 /* mode wil be set in fsg_lun_attr_is_visible() */
2555 static DEVICE_ATTR(ro, 0, ro_show, ro_store);
2556 static DEVICE_ATTR(file, 0, file_show, file_store);
2557 
2558 /****************************** FSG COMMON ******************************/
2559 
2560 static void fsg_lun_release(struct device *dev)
2561 {
2562 	/* Nothing needs to be done */
2563 }
2564 
2565 static struct fsg_common *fsg_common_setup(struct fsg_common *common)
2566 {
2567 	if (!common) {
2568 		common = kzalloc(sizeof(*common), GFP_KERNEL);
2569 		if (!common)
2570 			return ERR_PTR(-ENOMEM);
2571 		common->free_storage_on_release = 1;
2572 	} else {
2573 		common->free_storage_on_release = 0;
2574 	}
2575 	init_rwsem(&common->filesem);
2576 	spin_lock_init(&common->lock);
2577 	init_completion(&common->thread_notifier);
2578 	init_waitqueue_head(&common->io_wait);
2579 	init_waitqueue_head(&common->fsg_wait);
2580 	common->state = FSG_STATE_TERMINATED;
2581 	memset(common->luns, 0, sizeof(common->luns));
2582 
2583 	return common;
2584 }
2585 
2586 void fsg_common_set_sysfs(struct fsg_common *common, bool sysfs)
2587 {
2588 	common->sysfs = sysfs;
2589 }
2590 EXPORT_SYMBOL_GPL(fsg_common_set_sysfs);
2591 
2592 static void _fsg_common_free_buffers(struct fsg_buffhd *buffhds, unsigned n)
2593 {
2594 	if (buffhds) {
2595 		struct fsg_buffhd *bh = buffhds;
2596 		while (n--) {
2597 			kfree(bh->buf);
2598 			++bh;
2599 		}
2600 		kfree(buffhds);
2601 	}
2602 }
2603 
2604 int fsg_common_set_num_buffers(struct fsg_common *common, unsigned int n)
2605 {
2606 	struct fsg_buffhd *bh, *buffhds;
2607 	int i;
2608 
2609 	buffhds = kcalloc(n, sizeof(*buffhds), GFP_KERNEL);
2610 	if (!buffhds)
2611 		return -ENOMEM;
2612 
2613 	/* Data buffers cyclic list */
2614 	bh = buffhds;
2615 	i = n;
2616 	goto buffhds_first_it;
2617 	do {
2618 		bh->next = bh + 1;
2619 		++bh;
2620 buffhds_first_it:
2621 		bh->buf = kmalloc(FSG_BUFLEN, GFP_KERNEL);
2622 		if (unlikely(!bh->buf))
2623 			goto error_release;
2624 	} while (--i);
2625 	bh->next = buffhds;
2626 
2627 	_fsg_common_free_buffers(common->buffhds, common->fsg_num_buffers);
2628 	common->fsg_num_buffers = n;
2629 	common->buffhds = buffhds;
2630 
2631 	return 0;
2632 
2633 error_release:
2634 	/*
2635 	 * "buf"s pointed to by heads after n - i are NULL
2636 	 * so releasing them won't hurt
2637 	 */
2638 	_fsg_common_free_buffers(buffhds, n);
2639 
2640 	return -ENOMEM;
2641 }
2642 EXPORT_SYMBOL_GPL(fsg_common_set_num_buffers);
2643 
2644 void fsg_common_remove_lun(struct fsg_lun *lun)
2645 {
2646 	if (device_is_registered(&lun->dev))
2647 		device_unregister(&lun->dev);
2648 	fsg_lun_close(lun);
2649 	kfree(lun);
2650 }
2651 EXPORT_SYMBOL_GPL(fsg_common_remove_lun);
2652 
2653 static void _fsg_common_remove_luns(struct fsg_common *common, int n)
2654 {
2655 	int i;
2656 
2657 	for (i = 0; i < n; ++i)
2658 		if (common->luns[i]) {
2659 			fsg_common_remove_lun(common->luns[i]);
2660 			common->luns[i] = NULL;
2661 		}
2662 }
2663 
2664 void fsg_common_remove_luns(struct fsg_common *common)
2665 {
2666 	_fsg_common_remove_luns(common, ARRAY_SIZE(common->luns));
2667 }
2668 EXPORT_SYMBOL_GPL(fsg_common_remove_luns);
2669 
2670 void fsg_common_free_buffers(struct fsg_common *common)
2671 {
2672 	_fsg_common_free_buffers(common->buffhds, common->fsg_num_buffers);
2673 	common->buffhds = NULL;
2674 }
2675 EXPORT_SYMBOL_GPL(fsg_common_free_buffers);
2676 
2677 int fsg_common_set_cdev(struct fsg_common *common,
2678 			 struct usb_composite_dev *cdev, bool can_stall)
2679 {
2680 	struct usb_string *us;
2681 
2682 	common->gadget = cdev->gadget;
2683 	common->ep0 = cdev->gadget->ep0;
2684 	common->ep0req = cdev->req;
2685 	common->cdev = cdev;
2686 
2687 	us = usb_gstrings_attach(cdev, fsg_strings_array,
2688 				 ARRAY_SIZE(fsg_strings));
2689 	if (IS_ERR(us))
2690 		return PTR_ERR(us);
2691 
2692 	fsg_intf_desc.iInterface = us[FSG_STRING_INTERFACE].id;
2693 
2694 	/*
2695 	 * Some peripheral controllers are known not to be able to
2696 	 * halt bulk endpoints correctly.  If one of them is present,
2697 	 * disable stalls.
2698 	 */
2699 	common->can_stall = can_stall &&
2700 			gadget_is_stall_supported(common->gadget);
2701 
2702 	return 0;
2703 }
2704 EXPORT_SYMBOL_GPL(fsg_common_set_cdev);
2705 
2706 static struct attribute *fsg_lun_dev_attrs[] = {
2707 	&dev_attr_ro.attr,
2708 	&dev_attr_file.attr,
2709 	&dev_attr_nofua.attr,
2710 	NULL
2711 };
2712 
2713 static umode_t fsg_lun_dev_is_visible(struct kobject *kobj,
2714 				      struct attribute *attr, int idx)
2715 {
2716 	struct device *dev = kobj_to_dev(kobj);
2717 	struct fsg_lun *lun = fsg_lun_from_dev(dev);
2718 
2719 	if (attr == &dev_attr_ro.attr)
2720 		return lun->cdrom ? S_IRUGO : (S_IWUSR | S_IRUGO);
2721 	if (attr == &dev_attr_file.attr)
2722 		return lun->removable ? (S_IWUSR | S_IRUGO) : S_IRUGO;
2723 	return attr->mode;
2724 }
2725 
2726 static const struct attribute_group fsg_lun_dev_group = {
2727 	.attrs = fsg_lun_dev_attrs,
2728 	.is_visible = fsg_lun_dev_is_visible,
2729 };
2730 
2731 static const struct attribute_group *fsg_lun_dev_groups[] = {
2732 	&fsg_lun_dev_group,
2733 	NULL
2734 };
2735 
2736 int fsg_common_create_lun(struct fsg_common *common, struct fsg_lun_config *cfg,
2737 			  unsigned int id, const char *name,
2738 			  const char **name_pfx)
2739 {
2740 	struct fsg_lun *lun;
2741 	char *pathbuf, *p;
2742 	int rc = -ENOMEM;
2743 
2744 	if (id >= ARRAY_SIZE(common->luns))
2745 		return -ENODEV;
2746 
2747 	if (common->luns[id])
2748 		return -EBUSY;
2749 
2750 	if (!cfg->filename && !cfg->removable) {
2751 		pr_err("no file given for LUN%d\n", id);
2752 		return -EINVAL;
2753 	}
2754 
2755 	lun = kzalloc(sizeof(*lun), GFP_KERNEL);
2756 	if (!lun)
2757 		return -ENOMEM;
2758 
2759 	lun->name_pfx = name_pfx;
2760 
2761 	lun->cdrom = !!cfg->cdrom;
2762 	lun->ro = cfg->cdrom || cfg->ro;
2763 	lun->initially_ro = lun->ro;
2764 	lun->removable = !!cfg->removable;
2765 
2766 	if (!common->sysfs) {
2767 		/* we DON'T own the name!*/
2768 		lun->name = name;
2769 	} else {
2770 		lun->dev.release = fsg_lun_release;
2771 		lun->dev.parent = &common->gadget->dev;
2772 		lun->dev.groups = fsg_lun_dev_groups;
2773 		dev_set_drvdata(&lun->dev, &common->filesem);
2774 		dev_set_name(&lun->dev, "%s", name);
2775 		lun->name = dev_name(&lun->dev);
2776 
2777 		rc = device_register(&lun->dev);
2778 		if (rc) {
2779 			pr_info("failed to register LUN%d: %d\n", id, rc);
2780 			put_device(&lun->dev);
2781 			goto error_sysfs;
2782 		}
2783 	}
2784 
2785 	common->luns[id] = lun;
2786 
2787 	if (cfg->filename) {
2788 		rc = fsg_lun_open(lun, cfg->filename);
2789 		if (rc)
2790 			goto error_lun;
2791 	}
2792 
2793 	pathbuf = kmalloc(PATH_MAX, GFP_KERNEL);
2794 	p = "(no medium)";
2795 	if (fsg_lun_is_open(lun)) {
2796 		p = "(error)";
2797 		if (pathbuf) {
2798 			p = file_path(lun->filp, pathbuf, PATH_MAX);
2799 			if (IS_ERR(p))
2800 				p = "(error)";
2801 		}
2802 	}
2803 	pr_info("LUN: %s%s%sfile: %s\n",
2804 	      lun->removable ? "removable " : "",
2805 	      lun->ro ? "read only " : "",
2806 	      lun->cdrom ? "CD-ROM " : "",
2807 	      p);
2808 	kfree(pathbuf);
2809 
2810 	return 0;
2811 
2812 error_lun:
2813 	if (device_is_registered(&lun->dev))
2814 		device_unregister(&lun->dev);
2815 	fsg_lun_close(lun);
2816 	common->luns[id] = NULL;
2817 error_sysfs:
2818 	kfree(lun);
2819 	return rc;
2820 }
2821 EXPORT_SYMBOL_GPL(fsg_common_create_lun);
2822 
2823 int fsg_common_create_luns(struct fsg_common *common, struct fsg_config *cfg)
2824 {
2825 	char buf[8]; /* enough for 100000000 different numbers, decimal */
2826 	int i, rc;
2827 
2828 	fsg_common_remove_luns(common);
2829 
2830 	for (i = 0; i < cfg->nluns; ++i) {
2831 		snprintf(buf, sizeof(buf), "lun%d", i);
2832 		rc = fsg_common_create_lun(common, &cfg->luns[i], i, buf, NULL);
2833 		if (rc)
2834 			goto fail;
2835 	}
2836 
2837 	pr_info("Number of LUNs=%d\n", cfg->nluns);
2838 
2839 	return 0;
2840 
2841 fail:
2842 	_fsg_common_remove_luns(common, i);
2843 	return rc;
2844 }
2845 EXPORT_SYMBOL_GPL(fsg_common_create_luns);
2846 
2847 void fsg_common_set_inquiry_string(struct fsg_common *common, const char *vn,
2848 				   const char *pn)
2849 {
2850 	int i;
2851 
2852 	/* Prepare inquiryString */
2853 	i = get_default_bcdDevice();
2854 	snprintf(common->inquiry_string, sizeof(common->inquiry_string),
2855 		 "%-8s%-16s%04x", vn ?: "Linux",
2856 		 /* Assume product name dependent on the first LUN */
2857 		 pn ?: ((*common->luns)->cdrom
2858 		     ? "File-CD Gadget"
2859 		     : "File-Stor Gadget"),
2860 		 i);
2861 }
2862 EXPORT_SYMBOL_GPL(fsg_common_set_inquiry_string);
2863 
2864 static void fsg_common_release(struct fsg_common *common)
2865 {
2866 	int i;
2867 
2868 	/* If the thread isn't already dead, tell it to exit now */
2869 	if (common->state != FSG_STATE_TERMINATED) {
2870 		raise_exception(common, FSG_STATE_EXIT);
2871 		wait_for_completion(&common->thread_notifier);
2872 	}
2873 
2874 	for (i = 0; i < ARRAY_SIZE(common->luns); ++i) {
2875 		struct fsg_lun *lun = common->luns[i];
2876 		if (!lun)
2877 			continue;
2878 		fsg_lun_close(lun);
2879 		if (device_is_registered(&lun->dev))
2880 			device_unregister(&lun->dev);
2881 		kfree(lun);
2882 	}
2883 
2884 	_fsg_common_free_buffers(common->buffhds, common->fsg_num_buffers);
2885 	if (common->free_storage_on_release)
2886 		kfree(common);
2887 }
2888 
2889 
2890 /*-------------------------------------------------------------------------*/
2891 
2892 static int fsg_bind(struct usb_configuration *c, struct usb_function *f)
2893 {
2894 	struct fsg_dev		*fsg = fsg_from_func(f);
2895 	struct fsg_common	*common = fsg->common;
2896 	struct usb_gadget	*gadget = c->cdev->gadget;
2897 	int			i;
2898 	struct usb_ep		*ep;
2899 	unsigned		max_burst;
2900 	int			ret;
2901 	struct fsg_opts		*opts;
2902 
2903 	/* Don't allow to bind if we don't have at least one LUN */
2904 	ret = _fsg_common_get_max_lun(common);
2905 	if (ret < 0) {
2906 		pr_err("There should be at least one LUN.\n");
2907 		return -EINVAL;
2908 	}
2909 
2910 	opts = fsg_opts_from_func_inst(f->fi);
2911 	if (!opts->no_configfs) {
2912 		ret = fsg_common_set_cdev(fsg->common, c->cdev,
2913 					  fsg->common->can_stall);
2914 		if (ret)
2915 			return ret;
2916 		fsg_common_set_inquiry_string(fsg->common, NULL, NULL);
2917 	}
2918 
2919 	if (!common->thread_task) {
2920 		common->state = FSG_STATE_NORMAL;
2921 		common->thread_task =
2922 			kthread_create(fsg_main_thread, common, "file-storage");
2923 		if (IS_ERR(common->thread_task)) {
2924 			ret = PTR_ERR(common->thread_task);
2925 			common->thread_task = NULL;
2926 			common->state = FSG_STATE_TERMINATED;
2927 			return ret;
2928 		}
2929 		DBG(common, "I/O thread pid: %d\n",
2930 		    task_pid_nr(common->thread_task));
2931 		wake_up_process(common->thread_task);
2932 	}
2933 
2934 	fsg->gadget = gadget;
2935 
2936 	/* New interface */
2937 	i = usb_interface_id(c, f);
2938 	if (i < 0)
2939 		goto fail;
2940 	fsg_intf_desc.bInterfaceNumber = i;
2941 	fsg->interface_number = i;
2942 
2943 	/* Find all the endpoints we will use */
2944 	ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_in_desc);
2945 	if (!ep)
2946 		goto autoconf_fail;
2947 	fsg->bulk_in = ep;
2948 
2949 	ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_out_desc);
2950 	if (!ep)
2951 		goto autoconf_fail;
2952 	fsg->bulk_out = ep;
2953 
2954 	/* Assume endpoint addresses are the same for both speeds */
2955 	fsg_hs_bulk_in_desc.bEndpointAddress =
2956 		fsg_fs_bulk_in_desc.bEndpointAddress;
2957 	fsg_hs_bulk_out_desc.bEndpointAddress =
2958 		fsg_fs_bulk_out_desc.bEndpointAddress;
2959 
2960 	/* Calculate bMaxBurst, we know packet size is 1024 */
2961 	max_burst = min_t(unsigned, FSG_BUFLEN / 1024, 15);
2962 
2963 	fsg_ss_bulk_in_desc.bEndpointAddress =
2964 		fsg_fs_bulk_in_desc.bEndpointAddress;
2965 	fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst;
2966 
2967 	fsg_ss_bulk_out_desc.bEndpointAddress =
2968 		fsg_fs_bulk_out_desc.bEndpointAddress;
2969 	fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst;
2970 
2971 	ret = usb_assign_descriptors(f, fsg_fs_function, fsg_hs_function,
2972 			fsg_ss_function, fsg_ss_function);
2973 	if (ret)
2974 		goto autoconf_fail;
2975 
2976 	return 0;
2977 
2978 autoconf_fail:
2979 	ERROR(fsg, "unable to autoconfigure all endpoints\n");
2980 	i = -ENOTSUPP;
2981 fail:
2982 	/* terminate the thread */
2983 	if (fsg->common->state != FSG_STATE_TERMINATED) {
2984 		raise_exception(fsg->common, FSG_STATE_EXIT);
2985 		wait_for_completion(&fsg->common->thread_notifier);
2986 	}
2987 	return i;
2988 }
2989 
2990 /****************************** ALLOCATE FUNCTION *************************/
2991 
2992 static void fsg_unbind(struct usb_configuration *c, struct usb_function *f)
2993 {
2994 	struct fsg_dev		*fsg = fsg_from_func(f);
2995 	struct fsg_common	*common = fsg->common;
2996 
2997 	DBG(fsg, "unbind\n");
2998 	if (fsg->common->fsg == fsg) {
2999 		__raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE, NULL);
3000 		/* FIXME: make interruptible or killable somehow? */
3001 		wait_event(common->fsg_wait, common->fsg != fsg);
3002 	}
3003 
3004 	usb_free_all_descriptors(&fsg->function);
3005 }
3006 
3007 static inline struct fsg_lun_opts *to_fsg_lun_opts(struct config_item *item)
3008 {
3009 	return container_of(to_config_group(item), struct fsg_lun_opts, group);
3010 }
3011 
3012 static inline struct fsg_opts *to_fsg_opts(struct config_item *item)
3013 {
3014 	return container_of(to_config_group(item), struct fsg_opts,
3015 			    func_inst.group);
3016 }
3017 
3018 static void fsg_lun_attr_release(struct config_item *item)
3019 {
3020 	struct fsg_lun_opts *lun_opts;
3021 
3022 	lun_opts = to_fsg_lun_opts(item);
3023 	kfree(lun_opts);
3024 }
3025 
3026 static struct configfs_item_operations fsg_lun_item_ops = {
3027 	.release		= fsg_lun_attr_release,
3028 };
3029 
3030 static ssize_t fsg_lun_opts_file_show(struct config_item *item, char *page)
3031 {
3032 	struct fsg_lun_opts *opts = to_fsg_lun_opts(item);
3033 	struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent);
3034 
3035 	return fsg_show_file(opts->lun, &fsg_opts->common->filesem, page);
3036 }
3037 
3038 static ssize_t fsg_lun_opts_file_store(struct config_item *item,
3039 				       const char *page, size_t len)
3040 {
3041 	struct fsg_lun_opts *opts = to_fsg_lun_opts(item);
3042 	struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent);
3043 
3044 	return fsg_store_file(opts->lun, &fsg_opts->common->filesem, page, len);
3045 }
3046 
3047 CONFIGFS_ATTR(fsg_lun_opts_, file);
3048 
3049 static ssize_t fsg_lun_opts_ro_show(struct config_item *item, char *page)
3050 {
3051 	return fsg_show_ro(to_fsg_lun_opts(item)->lun, page);
3052 }
3053 
3054 static ssize_t fsg_lun_opts_ro_store(struct config_item *item,
3055 				       const char *page, size_t len)
3056 {
3057 	struct fsg_lun_opts *opts = to_fsg_lun_opts(item);
3058 	struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent);
3059 
3060 	return fsg_store_ro(opts->lun, &fsg_opts->common->filesem, page, len);
3061 }
3062 
3063 CONFIGFS_ATTR(fsg_lun_opts_, ro);
3064 
3065 static ssize_t fsg_lun_opts_removable_show(struct config_item *item,
3066 					   char *page)
3067 {
3068 	return fsg_show_removable(to_fsg_lun_opts(item)->lun, page);
3069 }
3070 
3071 static ssize_t fsg_lun_opts_removable_store(struct config_item *item,
3072 				       const char *page, size_t len)
3073 {
3074 	return fsg_store_removable(to_fsg_lun_opts(item)->lun, page, len);
3075 }
3076 
3077 CONFIGFS_ATTR(fsg_lun_opts_, removable);
3078 
3079 static ssize_t fsg_lun_opts_cdrom_show(struct config_item *item, char *page)
3080 {
3081 	return fsg_show_cdrom(to_fsg_lun_opts(item)->lun, page);
3082 }
3083 
3084 static ssize_t fsg_lun_opts_cdrom_store(struct config_item *item,
3085 				       const char *page, size_t len)
3086 {
3087 	struct fsg_lun_opts *opts = to_fsg_lun_opts(item);
3088 	struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent);
3089 
3090 	return fsg_store_cdrom(opts->lun, &fsg_opts->common->filesem, page,
3091 			       len);
3092 }
3093 
3094 CONFIGFS_ATTR(fsg_lun_opts_, cdrom);
3095 
3096 static ssize_t fsg_lun_opts_nofua_show(struct config_item *item, char *page)
3097 {
3098 	return fsg_show_nofua(to_fsg_lun_opts(item)->lun, page);
3099 }
3100 
3101 static ssize_t fsg_lun_opts_nofua_store(struct config_item *item,
3102 				       const char *page, size_t len)
3103 {
3104 	return fsg_store_nofua(to_fsg_lun_opts(item)->lun, page, len);
3105 }
3106 
3107 CONFIGFS_ATTR(fsg_lun_opts_, nofua);
3108 
3109 static ssize_t fsg_lun_opts_inquiry_string_show(struct config_item *item,
3110 						char *page)
3111 {
3112 	return fsg_show_inquiry_string(to_fsg_lun_opts(item)->lun, page);
3113 }
3114 
3115 static ssize_t fsg_lun_opts_inquiry_string_store(struct config_item *item,
3116 						 const char *page, size_t len)
3117 {
3118 	return fsg_store_inquiry_string(to_fsg_lun_opts(item)->lun, page, len);
3119 }
3120 
3121 CONFIGFS_ATTR(fsg_lun_opts_, inquiry_string);
3122 
3123 static struct configfs_attribute *fsg_lun_attrs[] = {
3124 	&fsg_lun_opts_attr_file,
3125 	&fsg_lun_opts_attr_ro,
3126 	&fsg_lun_opts_attr_removable,
3127 	&fsg_lun_opts_attr_cdrom,
3128 	&fsg_lun_opts_attr_nofua,
3129 	&fsg_lun_opts_attr_inquiry_string,
3130 	NULL,
3131 };
3132 
3133 static const struct config_item_type fsg_lun_type = {
3134 	.ct_item_ops	= &fsg_lun_item_ops,
3135 	.ct_attrs	= fsg_lun_attrs,
3136 	.ct_owner	= THIS_MODULE,
3137 };
3138 
3139 static struct config_group *fsg_lun_make(struct config_group *group,
3140 					 const char *name)
3141 {
3142 	struct fsg_lun_opts *opts;
3143 	struct fsg_opts *fsg_opts;
3144 	struct fsg_lun_config config;
3145 	char *num_str;
3146 	u8 num;
3147 	int ret;
3148 
3149 	num_str = strchr(name, '.');
3150 	if (!num_str) {
3151 		pr_err("Unable to locate . in LUN.NUMBER\n");
3152 		return ERR_PTR(-EINVAL);
3153 	}
3154 	num_str++;
3155 
3156 	ret = kstrtou8(num_str, 0, &num);
3157 	if (ret)
3158 		return ERR_PTR(ret);
3159 
3160 	fsg_opts = to_fsg_opts(&group->cg_item);
3161 	if (num >= FSG_MAX_LUNS)
3162 		return ERR_PTR(-ERANGE);
3163 	num = array_index_nospec(num, FSG_MAX_LUNS);
3164 
3165 	mutex_lock(&fsg_opts->lock);
3166 	if (fsg_opts->refcnt || fsg_opts->common->luns[num]) {
3167 		ret = -EBUSY;
3168 		goto out;
3169 	}
3170 
3171 	opts = kzalloc(sizeof(*opts), GFP_KERNEL);
3172 	if (!opts) {
3173 		ret = -ENOMEM;
3174 		goto out;
3175 	}
3176 
3177 	memset(&config, 0, sizeof(config));
3178 	config.removable = true;
3179 
3180 	ret = fsg_common_create_lun(fsg_opts->common, &config, num, name,
3181 				    (const char **)&group->cg_item.ci_name);
3182 	if (ret) {
3183 		kfree(opts);
3184 		goto out;
3185 	}
3186 	opts->lun = fsg_opts->common->luns[num];
3187 	opts->lun_id = num;
3188 	mutex_unlock(&fsg_opts->lock);
3189 
3190 	config_group_init_type_name(&opts->group, name, &fsg_lun_type);
3191 
3192 	return &opts->group;
3193 out:
3194 	mutex_unlock(&fsg_opts->lock);
3195 	return ERR_PTR(ret);
3196 }
3197 
3198 static void fsg_lun_drop(struct config_group *group, struct config_item *item)
3199 {
3200 	struct fsg_lun_opts *lun_opts;
3201 	struct fsg_opts *fsg_opts;
3202 
3203 	lun_opts = to_fsg_lun_opts(item);
3204 	fsg_opts = to_fsg_opts(&group->cg_item);
3205 
3206 	mutex_lock(&fsg_opts->lock);
3207 	if (fsg_opts->refcnt) {
3208 		struct config_item *gadget;
3209 
3210 		gadget = group->cg_item.ci_parent->ci_parent;
3211 		unregister_gadget_item(gadget);
3212 	}
3213 
3214 	fsg_common_remove_lun(lun_opts->lun);
3215 	fsg_opts->common->luns[lun_opts->lun_id] = NULL;
3216 	lun_opts->lun_id = 0;
3217 	mutex_unlock(&fsg_opts->lock);
3218 
3219 	config_item_put(item);
3220 }
3221 
3222 static void fsg_attr_release(struct config_item *item)
3223 {
3224 	struct fsg_opts *opts = to_fsg_opts(item);
3225 
3226 	usb_put_function_instance(&opts->func_inst);
3227 }
3228 
3229 static struct configfs_item_operations fsg_item_ops = {
3230 	.release		= fsg_attr_release,
3231 };
3232 
3233 static ssize_t fsg_opts_stall_show(struct config_item *item, char *page)
3234 {
3235 	struct fsg_opts *opts = to_fsg_opts(item);
3236 	int result;
3237 
3238 	mutex_lock(&opts->lock);
3239 	result = sprintf(page, "%d", opts->common->can_stall);
3240 	mutex_unlock(&opts->lock);
3241 
3242 	return result;
3243 }
3244 
3245 static ssize_t fsg_opts_stall_store(struct config_item *item, const char *page,
3246 				    size_t len)
3247 {
3248 	struct fsg_opts *opts = to_fsg_opts(item);
3249 	int ret;
3250 	bool stall;
3251 
3252 	mutex_lock(&opts->lock);
3253 
3254 	if (opts->refcnt) {
3255 		mutex_unlock(&opts->lock);
3256 		return -EBUSY;
3257 	}
3258 
3259 	ret = strtobool(page, &stall);
3260 	if (!ret) {
3261 		opts->common->can_stall = stall;
3262 		ret = len;
3263 	}
3264 
3265 	mutex_unlock(&opts->lock);
3266 
3267 	return ret;
3268 }
3269 
3270 CONFIGFS_ATTR(fsg_opts_, stall);
3271 
3272 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
3273 static ssize_t fsg_opts_num_buffers_show(struct config_item *item, char *page)
3274 {
3275 	struct fsg_opts *opts = to_fsg_opts(item);
3276 	int result;
3277 
3278 	mutex_lock(&opts->lock);
3279 	result = sprintf(page, "%d", opts->common->fsg_num_buffers);
3280 	mutex_unlock(&opts->lock);
3281 
3282 	return result;
3283 }
3284 
3285 static ssize_t fsg_opts_num_buffers_store(struct config_item *item,
3286 					  const char *page, size_t len)
3287 {
3288 	struct fsg_opts *opts = to_fsg_opts(item);
3289 	int ret;
3290 	u8 num;
3291 
3292 	mutex_lock(&opts->lock);
3293 	if (opts->refcnt) {
3294 		ret = -EBUSY;
3295 		goto end;
3296 	}
3297 	ret = kstrtou8(page, 0, &num);
3298 	if (ret)
3299 		goto end;
3300 
3301 	ret = fsg_common_set_num_buffers(opts->common, num);
3302 	if (ret)
3303 		goto end;
3304 	ret = len;
3305 
3306 end:
3307 	mutex_unlock(&opts->lock);
3308 	return ret;
3309 }
3310 
3311 CONFIGFS_ATTR(fsg_opts_, num_buffers);
3312 #endif
3313 
3314 static struct configfs_attribute *fsg_attrs[] = {
3315 	&fsg_opts_attr_stall,
3316 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
3317 	&fsg_opts_attr_num_buffers,
3318 #endif
3319 	NULL,
3320 };
3321 
3322 static struct configfs_group_operations fsg_group_ops = {
3323 	.make_group	= fsg_lun_make,
3324 	.drop_item	= fsg_lun_drop,
3325 };
3326 
3327 static const struct config_item_type fsg_func_type = {
3328 	.ct_item_ops	= &fsg_item_ops,
3329 	.ct_group_ops	= &fsg_group_ops,
3330 	.ct_attrs	= fsg_attrs,
3331 	.ct_owner	= THIS_MODULE,
3332 };
3333 
3334 static void fsg_free_inst(struct usb_function_instance *fi)
3335 {
3336 	struct fsg_opts *opts;
3337 
3338 	opts = fsg_opts_from_func_inst(fi);
3339 	fsg_common_release(opts->common);
3340 	kfree(opts);
3341 }
3342 
3343 static struct usb_function_instance *fsg_alloc_inst(void)
3344 {
3345 	struct fsg_opts *opts;
3346 	struct fsg_lun_config config;
3347 	int rc;
3348 
3349 	opts = kzalloc(sizeof(*opts), GFP_KERNEL);
3350 	if (!opts)
3351 		return ERR_PTR(-ENOMEM);
3352 	mutex_init(&opts->lock);
3353 	opts->func_inst.free_func_inst = fsg_free_inst;
3354 	opts->common = fsg_common_setup(opts->common);
3355 	if (IS_ERR(opts->common)) {
3356 		rc = PTR_ERR(opts->common);
3357 		goto release_opts;
3358 	}
3359 
3360 	rc = fsg_common_set_num_buffers(opts->common,
3361 					CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS);
3362 	if (rc)
3363 		goto release_common;
3364 
3365 	pr_info(FSG_DRIVER_DESC ", version: " FSG_DRIVER_VERSION "\n");
3366 
3367 	memset(&config, 0, sizeof(config));
3368 	config.removable = true;
3369 	rc = fsg_common_create_lun(opts->common, &config, 0, "lun.0",
3370 			(const char **)&opts->func_inst.group.cg_item.ci_name);
3371 	if (rc)
3372 		goto release_buffers;
3373 
3374 	opts->lun0.lun = opts->common->luns[0];
3375 	opts->lun0.lun_id = 0;
3376 
3377 	config_group_init_type_name(&opts->func_inst.group, "", &fsg_func_type);
3378 
3379 	config_group_init_type_name(&opts->lun0.group, "lun.0", &fsg_lun_type);
3380 	configfs_add_default_group(&opts->lun0.group, &opts->func_inst.group);
3381 
3382 	return &opts->func_inst;
3383 
3384 release_buffers:
3385 	fsg_common_free_buffers(opts->common);
3386 release_common:
3387 	kfree(opts->common);
3388 release_opts:
3389 	kfree(opts);
3390 	return ERR_PTR(rc);
3391 }
3392 
3393 static void fsg_free(struct usb_function *f)
3394 {
3395 	struct fsg_dev *fsg;
3396 	struct fsg_opts *opts;
3397 
3398 	fsg = container_of(f, struct fsg_dev, function);
3399 	opts = container_of(f->fi, struct fsg_opts, func_inst);
3400 
3401 	mutex_lock(&opts->lock);
3402 	opts->refcnt--;
3403 	mutex_unlock(&opts->lock);
3404 
3405 	kfree(fsg);
3406 }
3407 
3408 static struct usb_function *fsg_alloc(struct usb_function_instance *fi)
3409 {
3410 	struct fsg_opts *opts = fsg_opts_from_func_inst(fi);
3411 	struct fsg_common *common = opts->common;
3412 	struct fsg_dev *fsg;
3413 
3414 	fsg = kzalloc(sizeof(*fsg), GFP_KERNEL);
3415 	if (unlikely(!fsg))
3416 		return ERR_PTR(-ENOMEM);
3417 
3418 	mutex_lock(&opts->lock);
3419 	opts->refcnt++;
3420 	mutex_unlock(&opts->lock);
3421 
3422 	fsg->function.name	= FSG_DRIVER_DESC;
3423 	fsg->function.bind	= fsg_bind;
3424 	fsg->function.unbind	= fsg_unbind;
3425 	fsg->function.setup	= fsg_setup;
3426 	fsg->function.set_alt	= fsg_set_alt;
3427 	fsg->function.disable	= fsg_disable;
3428 	fsg->function.free_func	= fsg_free;
3429 
3430 	fsg->common               = common;
3431 
3432 	return &fsg->function;
3433 }
3434 
3435 DECLARE_USB_FUNCTION_INIT(mass_storage, fsg_alloc_inst, fsg_alloc);
3436 MODULE_LICENSE("GPL");
3437 MODULE_AUTHOR("Michal Nazarewicz");
3438 
3439 /************************* Module parameters *************************/
3440 
3441 
3442 void fsg_config_from_params(struct fsg_config *cfg,
3443 		       const struct fsg_module_parameters *params,
3444 		       unsigned int fsg_num_buffers)
3445 {
3446 	struct fsg_lun_config *lun;
3447 	unsigned i;
3448 
3449 	/* Configure LUNs */
3450 	cfg->nluns =
3451 		min(params->luns ?: (params->file_count ?: 1u),
3452 		    (unsigned)FSG_MAX_LUNS);
3453 	for (i = 0, lun = cfg->luns; i < cfg->nluns; ++i, ++lun) {
3454 		lun->ro = !!params->ro[i];
3455 		lun->cdrom = !!params->cdrom[i];
3456 		lun->removable = !!params->removable[i];
3457 		lun->filename =
3458 			params->file_count > i && params->file[i][0]
3459 			? params->file[i]
3460 			: NULL;
3461 	}
3462 
3463 	/* Let MSF use defaults */
3464 	cfg->vendor_name = NULL;
3465 	cfg->product_name = NULL;
3466 
3467 	cfg->ops = NULL;
3468 	cfg->private_data = NULL;
3469 
3470 	/* Finalise */
3471 	cfg->can_stall = params->stall;
3472 	cfg->fsg_num_buffers = fsg_num_buffers;
3473 }
3474 EXPORT_SYMBOL_GPL(fsg_config_from_params);
3475