1 /*
2  * f_mass_storage.c -- Mass Storage USB Composite Function
3  *
4  * Copyright (C) 2003-2008 Alan Stern
5  * Copyright (C) 2009 Samsung Electronics
6  *                    Author: Michal Nazarewicz <mina86@mina86.com>
7  * All rights reserved.
8  *
9  * Redistribution and use in source and binary forms, with or without
10  * modification, are permitted provided that the following conditions
11  * are met:
12  * 1. Redistributions of source code must retain the above copyright
13  *    notice, this list of conditions, and the following disclaimer,
14  *    without modification.
15  * 2. Redistributions in binary form must reproduce the above copyright
16  *    notice, this list of conditions and the following disclaimer in the
17  *    documentation and/or other materials provided with the distribution.
18  * 3. The names of the above-listed copyright holders may not be used
19  *    to endorse or promote products derived from this software without
20  *    specific prior written permission.
21  *
22  * ALTERNATIVELY, this software may be distributed under the terms of the
23  * GNU General Public License ("GPL") as published by the Free Software
24  * Foundation, either version 2 of that License or (at your option) any
25  * later version.
26  *
27  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
28  * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
29  * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
30  * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
31  * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
32  * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
33  * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
34  * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
35  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
36  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
37  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
38  */
39 
40 /*
41  * The Mass Storage Function acts as a USB Mass Storage device,
42  * appearing to the host as a disk drive or as a CD-ROM drive.  In
43  * addition to providing an example of a genuinely useful composite
44  * function for a USB device, it also illustrates a technique of
45  * double-buffering for increased throughput.
46  *
47  * For more information about MSF and in particular its module
48  * parameters and sysfs interface read the
49  * <Documentation/usb/mass-storage.txt> file.
50  */
51 
52 /*
53  * MSF is configured by specifying a fsg_config structure.  It has the
54  * following fields:
55  *
56  *	nluns		Number of LUNs function have (anywhere from 1
57  *				to FSG_MAX_LUNS).
58  *	luns		An array of LUN configuration values.  This
59  *				should be filled for each LUN that
60  *				function will include (ie. for "nluns"
61  *				LUNs).  Each element of the array has
62  *				the following fields:
63  *	->filename	The path to the backing file for the LUN.
64  *				Required if LUN is not marked as
65  *				removable.
66  *	->ro		Flag specifying access to the LUN shall be
67  *				read-only.  This is implied if CD-ROM
68  *				emulation is enabled as well as when
69  *				it was impossible to open "filename"
70  *				in R/W mode.
71  *	->removable	Flag specifying that LUN shall be indicated as
72  *				being removable.
73  *	->cdrom		Flag specifying that LUN shall be reported as
74  *				being a CD-ROM.
75  *	->nofua		Flag specifying that FUA flag in SCSI WRITE(10,12)
76  *				commands for this LUN shall be ignored.
77  *
78  *	vendor_name
79  *	product_name
80  *	release		Information used as a reply to INQUIRY
81  *				request.  To use default set to NULL,
82  *				NULL, 0xffff respectively.  The first
83  *				field should be 8 and the second 16
84  *				characters or less.
85  *
86  *	can_stall	Set to permit function to halt bulk endpoints.
87  *				Disabled on some USB devices known not
88  *				to work correctly.  You should set it
89  *				to true.
90  *
91  * If "removable" is not set for a LUN then a backing file must be
92  * specified.  If it is set, then NULL filename means the LUN's medium
93  * is not loaded (an empty string as "filename" in the fsg_config
94  * structure causes error).  The CD-ROM emulation includes a single
95  * data track and no audio tracks; hence there need be only one
96  * backing file per LUN.
97  *
98  * This function is heavily based on "File-backed Storage Gadget" by
99  * Alan Stern which in turn is heavily based on "Gadget Zero" by David
100  * Brownell.  The driver's SCSI command interface was based on the
101  * "Information technology - Small Computer System Interface - 2"
102  * document from X3T9.2 Project 375D, Revision 10L, 7-SEP-93,
103  * available at <http://www.t10.org/ftp/t10/drafts/s2/s2-r10l.pdf>.
104  * The single exception is opcode 0x23 (READ FORMAT CAPACITIES), which
105  * was based on the "Universal Serial Bus Mass Storage Class UFI
106  * Command Specification" document, Revision 1.0, December 14, 1998,
107  * available at
108  * <http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf>.
109  */
110 
111 /*
112  *				Driver Design
113  *
114  * The MSF is fairly straightforward.  There is a main kernel
115  * thread that handles most of the work.  Interrupt routines field
116  * callbacks from the controller driver: bulk- and interrupt-request
117  * completion notifications, endpoint-0 events, and disconnect events.
118  * Completion events are passed to the main thread by wakeup calls.  Many
119  * ep0 requests are handled at interrupt time, but SetInterface,
120  * SetConfiguration, and device reset requests are forwarded to the
121  * thread in the form of "exceptions" using SIGUSR1 signals (since they
122  * should interrupt any ongoing file I/O operations).
123  *
124  * The thread's main routine implements the standard command/data/status
125  * parts of a SCSI interaction.  It and its subroutines are full of tests
126  * for pending signals/exceptions -- all this polling is necessary since
127  * the kernel has no setjmp/longjmp equivalents.  (Maybe this is an
128  * indication that the driver really wants to be running in userspace.)
129  * An important point is that so long as the thread is alive it keeps an
130  * open reference to the backing file.  This will prevent unmounting
131  * the backing file's underlying filesystem and could cause problems
132  * during system shutdown, for example.  To prevent such problems, the
133  * thread catches INT, TERM, and KILL signals and converts them into
134  * an EXIT exception.
135  *
136  * In normal operation the main thread is started during the gadget's
137  * fsg_bind() callback and stopped during fsg_unbind().  But it can
138  * also exit when it receives a signal, and there's no point leaving
139  * the gadget running when the thread is dead.  As of this moment, MSF
140  * provides no way to deregister the gadget when thread dies -- maybe
141  * a callback functions is needed.
142  *
143  * To provide maximum throughput, the driver uses a circular pipeline of
144  * buffer heads (struct fsg_buffhd).  In principle the pipeline can be
145  * arbitrarily long; in practice the benefits don't justify having more
146  * than 2 stages (i.e., double buffering).  But it helps to think of the
147  * pipeline as being a long one.  Each buffer head contains a bulk-in and
148  * a bulk-out request pointer (since the buffer can be used for both
149  * output and input -- directions always are given from the host's
150  * point of view) as well as a pointer to the buffer and various state
151  * variables.
152  *
153  * Use of the pipeline follows a simple protocol.  There is a variable
154  * (fsg->next_buffhd_to_fill) that points to the next buffer head to use.
155  * At any time that buffer head may still be in use from an earlier
156  * request, so each buffer head has a state variable indicating whether
157  * it is EMPTY, FULL, or BUSY.  Typical use involves waiting for the
158  * buffer head to be EMPTY, filling the buffer either by file I/O or by
159  * USB I/O (during which the buffer head is BUSY), and marking the buffer
160  * head FULL when the I/O is complete.  Then the buffer will be emptied
161  * (again possibly by USB I/O, during which it is marked BUSY) and
162  * finally marked EMPTY again (possibly by a completion routine).
163  *
164  * A module parameter tells the driver to avoid stalling the bulk
165  * endpoints wherever the transport specification allows.  This is
166  * necessary for some UDCs like the SuperH, which cannot reliably clear a
167  * halt on a bulk endpoint.  However, under certain circumstances the
168  * Bulk-only specification requires a stall.  In such cases the driver
169  * will halt the endpoint and set a flag indicating that it should clear
170  * the halt in software during the next device reset.  Hopefully this
171  * will permit everything to work correctly.  Furthermore, although the
172  * specification allows the bulk-out endpoint to halt when the host sends
173  * too much data, implementing this would cause an unavoidable race.
174  * The driver will always use the "no-stall" approach for OUT transfers.
175  *
176  * One subtle point concerns sending status-stage responses for ep0
177  * requests.  Some of these requests, such as device reset, can involve
178  * interrupting an ongoing file I/O operation, which might take an
179  * arbitrarily long time.  During that delay the host might give up on
180  * the original ep0 request and issue a new one.  When that happens the
181  * driver should not notify the host about completion of the original
182  * request, as the host will no longer be waiting for it.  So the driver
183  * assigns to each ep0 request a unique tag, and it keeps track of the
184  * tag value of the request associated with a long-running exception
185  * (device-reset, interface-change, or configuration-change).  When the
186  * exception handler is finished, the status-stage response is submitted
187  * only if the current ep0 request tag is equal to the exception request
188  * tag.  Thus only the most recently received ep0 request will get a
189  * status-stage response.
190  *
191  * Warning: This driver source file is too long.  It ought to be split up
192  * into a header file plus about 3 separate .c files, to handle the details
193  * of the Gadget, USB Mass Storage, and SCSI protocols.
194  */
195 
196 
197 /* #define VERBOSE_DEBUG */
198 /* #define DUMP_MSGS */
199 
200 #include <linux/blkdev.h>
201 #include <linux/completion.h>
202 #include <linux/dcache.h>
203 #include <linux/delay.h>
204 #include <linux/device.h>
205 #include <linux/fcntl.h>
206 #include <linux/file.h>
207 #include <linux/fs.h>
208 #include <linux/kref.h>
209 #include <linux/kthread.h>
210 #include <linux/sched/signal.h>
211 #include <linux/limits.h>
212 #include <linux/rwsem.h>
213 #include <linux/slab.h>
214 #include <linux/spinlock.h>
215 #include <linux/string.h>
216 #include <linux/freezer.h>
217 #include <linux/module.h>
218 #include <linux/uaccess.h>
219 
220 #include <linux/usb/ch9.h>
221 #include <linux/usb/gadget.h>
222 #include <linux/usb/composite.h>
223 
224 #include "configfs.h"
225 
226 
227 /*------------------------------------------------------------------------*/
228 
229 #define FSG_DRIVER_DESC		"Mass Storage Function"
230 #define FSG_DRIVER_VERSION	"2009/09/11"
231 
232 static const char fsg_string_interface[] = "Mass Storage";
233 
234 #include "storage_common.h"
235 #include "f_mass_storage.h"
236 
237 /* Static strings, in UTF-8 (for simplicity we use only ASCII characters) */
238 static struct usb_string		fsg_strings[] = {
239 	{FSG_STRING_INTERFACE,		fsg_string_interface},
240 	{}
241 };
242 
243 static struct usb_gadget_strings	fsg_stringtab = {
244 	.language	= 0x0409,		/* en-us */
245 	.strings	= fsg_strings,
246 };
247 
248 static struct usb_gadget_strings *fsg_strings_array[] = {
249 	&fsg_stringtab,
250 	NULL,
251 };
252 
253 /*-------------------------------------------------------------------------*/
254 
255 struct fsg_dev;
256 struct fsg_common;
257 
258 /* Data shared by all the FSG instances. */
259 struct fsg_common {
260 	struct usb_gadget	*gadget;
261 	struct usb_composite_dev *cdev;
262 	struct fsg_dev		*fsg, *new_fsg;
263 	wait_queue_head_t	io_wait;
264 	wait_queue_head_t	fsg_wait;
265 
266 	/* filesem protects: backing files in use */
267 	struct rw_semaphore	filesem;
268 
269 	/* lock protects: state and thread_task */
270 	spinlock_t		lock;
271 
272 	struct usb_ep		*ep0;		/* Copy of gadget->ep0 */
273 	struct usb_request	*ep0req;	/* Copy of cdev->req */
274 	unsigned int		ep0_req_tag;
275 
276 	struct fsg_buffhd	*next_buffhd_to_fill;
277 	struct fsg_buffhd	*next_buffhd_to_drain;
278 	struct fsg_buffhd	*buffhds;
279 	unsigned int		fsg_num_buffers;
280 
281 	int			cmnd_size;
282 	u8			cmnd[MAX_COMMAND_SIZE];
283 
284 	unsigned int		lun;
285 	struct fsg_lun		*luns[FSG_MAX_LUNS];
286 	struct fsg_lun		*curlun;
287 
288 	unsigned int		bulk_out_maxpacket;
289 	enum fsg_state		state;		/* For exception handling */
290 	unsigned int		exception_req_tag;
291 
292 	enum data_direction	data_dir;
293 	u32			data_size;
294 	u32			data_size_from_cmnd;
295 	u32			tag;
296 	u32			residue;
297 	u32			usb_amount_left;
298 
299 	unsigned int		can_stall:1;
300 	unsigned int		free_storage_on_release:1;
301 	unsigned int		phase_error:1;
302 	unsigned int		short_packet_received:1;
303 	unsigned int		bad_lun_okay:1;
304 	unsigned int		running:1;
305 	unsigned int		sysfs:1;
306 
307 	struct completion	thread_notifier;
308 	struct task_struct	*thread_task;
309 
310 	/* Callback functions. */
311 	const struct fsg_operations	*ops;
312 	/* Gadget's private data. */
313 	void			*private_data;
314 
315 	char inquiry_string[INQUIRY_STRING_LEN];
316 
317 	struct kref		ref;
318 };
319 
320 struct fsg_dev {
321 	struct usb_function	function;
322 	struct usb_gadget	*gadget;	/* Copy of cdev->gadget */
323 	struct fsg_common	*common;
324 
325 	u16			interface_number;
326 
327 	unsigned int		bulk_in_enabled:1;
328 	unsigned int		bulk_out_enabled:1;
329 
330 	unsigned long		atomic_bitflags;
331 #define IGNORE_BULK_OUT		0
332 
333 	struct usb_ep		*bulk_in;
334 	struct usb_ep		*bulk_out;
335 };
336 
337 static inline int __fsg_is_set(struct fsg_common *common,
338 			       const char *func, unsigned line)
339 {
340 	if (common->fsg)
341 		return 1;
342 	ERROR(common, "common->fsg is NULL in %s at %u\n", func, line);
343 	WARN_ON(1);
344 	return 0;
345 }
346 
347 #define fsg_is_set(common) likely(__fsg_is_set(common, __func__, __LINE__))
348 
349 static inline struct fsg_dev *fsg_from_func(struct usb_function *f)
350 {
351 	return container_of(f, struct fsg_dev, function);
352 }
353 
354 typedef void (*fsg_routine_t)(struct fsg_dev *);
355 
356 static int exception_in_progress(struct fsg_common *common)
357 {
358 	return common->state > FSG_STATE_NORMAL;
359 }
360 
361 /* Make bulk-out requests be divisible by the maxpacket size */
362 static void set_bulk_out_req_length(struct fsg_common *common,
363 				    struct fsg_buffhd *bh, unsigned int length)
364 {
365 	unsigned int	rem;
366 
367 	bh->bulk_out_intended_length = length;
368 	rem = length % common->bulk_out_maxpacket;
369 	if (rem > 0)
370 		length += common->bulk_out_maxpacket - rem;
371 	bh->outreq->length = length;
372 }
373 
374 
375 /*-------------------------------------------------------------------------*/
376 
377 static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep)
378 {
379 	const char	*name;
380 
381 	if (ep == fsg->bulk_in)
382 		name = "bulk-in";
383 	else if (ep == fsg->bulk_out)
384 		name = "bulk-out";
385 	else
386 		name = ep->name;
387 	DBG(fsg, "%s set halt\n", name);
388 	return usb_ep_set_halt(ep);
389 }
390 
391 
392 /*-------------------------------------------------------------------------*/
393 
394 /* These routines may be called in process context or in_irq */
395 
396 static void raise_exception(struct fsg_common *common, enum fsg_state new_state)
397 {
398 	unsigned long		flags;
399 
400 	/*
401 	 * Do nothing if a higher-priority exception is already in progress.
402 	 * If a lower-or-equal priority exception is in progress, preempt it
403 	 * and notify the main thread by sending it a signal.
404 	 */
405 	spin_lock_irqsave(&common->lock, flags);
406 	if (common->state <= new_state) {
407 		common->exception_req_tag = common->ep0_req_tag;
408 		common->state = new_state;
409 		if (common->thread_task)
410 			send_sig_info(SIGUSR1, SEND_SIG_FORCED,
411 				      common->thread_task);
412 	}
413 	spin_unlock_irqrestore(&common->lock, flags);
414 }
415 
416 
417 /*-------------------------------------------------------------------------*/
418 
419 static int ep0_queue(struct fsg_common *common)
420 {
421 	int	rc;
422 
423 	rc = usb_ep_queue(common->ep0, common->ep0req, GFP_ATOMIC);
424 	common->ep0->driver_data = common;
425 	if (rc != 0 && rc != -ESHUTDOWN) {
426 		/* We can't do much more than wait for a reset */
427 		WARNING(common, "error in submission: %s --> %d\n",
428 			common->ep0->name, rc);
429 	}
430 	return rc;
431 }
432 
433 
434 /*-------------------------------------------------------------------------*/
435 
436 /* Completion handlers. These always run in_irq. */
437 
438 static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req)
439 {
440 	struct fsg_common	*common = ep->driver_data;
441 	struct fsg_buffhd	*bh = req->context;
442 
443 	if (req->status || req->actual != req->length)
444 		DBG(common, "%s --> %d, %u/%u\n", __func__,
445 		    req->status, req->actual, req->length);
446 	if (req->status == -ECONNRESET)		/* Request was cancelled */
447 		usb_ep_fifo_flush(ep);
448 
449 	/* Synchronize with the smp_load_acquire() in sleep_thread() */
450 	smp_store_release(&bh->state, BUF_STATE_EMPTY);
451 	wake_up(&common->io_wait);
452 }
453 
454 static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req)
455 {
456 	struct fsg_common	*common = ep->driver_data;
457 	struct fsg_buffhd	*bh = req->context;
458 
459 	dump_msg(common, "bulk-out", req->buf, req->actual);
460 	if (req->status || req->actual != bh->bulk_out_intended_length)
461 		DBG(common, "%s --> %d, %u/%u\n", __func__,
462 		    req->status, req->actual, bh->bulk_out_intended_length);
463 	if (req->status == -ECONNRESET)		/* Request was cancelled */
464 		usb_ep_fifo_flush(ep);
465 
466 	/* Synchronize with the smp_load_acquire() in sleep_thread() */
467 	smp_store_release(&bh->state, BUF_STATE_FULL);
468 	wake_up(&common->io_wait);
469 }
470 
471 static int _fsg_common_get_max_lun(struct fsg_common *common)
472 {
473 	int i = ARRAY_SIZE(common->luns) - 1;
474 
475 	while (i >= 0 && !common->luns[i])
476 		--i;
477 
478 	return i;
479 }
480 
481 static int fsg_setup(struct usb_function *f,
482 		     const struct usb_ctrlrequest *ctrl)
483 {
484 	struct fsg_dev		*fsg = fsg_from_func(f);
485 	struct usb_request	*req = fsg->common->ep0req;
486 	u16			w_index = le16_to_cpu(ctrl->wIndex);
487 	u16			w_value = le16_to_cpu(ctrl->wValue);
488 	u16			w_length = le16_to_cpu(ctrl->wLength);
489 
490 	if (!fsg_is_set(fsg->common))
491 		return -EOPNOTSUPP;
492 
493 	++fsg->common->ep0_req_tag;	/* Record arrival of a new request */
494 	req->context = NULL;
495 	req->length = 0;
496 	dump_msg(fsg, "ep0-setup", (u8 *) ctrl, sizeof(*ctrl));
497 
498 	switch (ctrl->bRequest) {
499 
500 	case US_BULK_RESET_REQUEST:
501 		if (ctrl->bRequestType !=
502 		    (USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE))
503 			break;
504 		if (w_index != fsg->interface_number || w_value != 0 ||
505 				w_length != 0)
506 			return -EDOM;
507 
508 		/*
509 		 * Raise an exception to stop the current operation
510 		 * and reinitialize our state.
511 		 */
512 		DBG(fsg, "bulk reset request\n");
513 		raise_exception(fsg->common, FSG_STATE_PROTOCOL_RESET);
514 		return USB_GADGET_DELAYED_STATUS;
515 
516 	case US_BULK_GET_MAX_LUN:
517 		if (ctrl->bRequestType !=
518 		    (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE))
519 			break;
520 		if (w_index != fsg->interface_number || w_value != 0 ||
521 				w_length != 1)
522 			return -EDOM;
523 		VDBG(fsg, "get max LUN\n");
524 		*(u8 *)req->buf = _fsg_common_get_max_lun(fsg->common);
525 
526 		/* Respond with data/status */
527 		req->length = min((u16)1, w_length);
528 		return ep0_queue(fsg->common);
529 	}
530 
531 	VDBG(fsg,
532 	     "unknown class-specific control req %02x.%02x v%04x i%04x l%u\n",
533 	     ctrl->bRequestType, ctrl->bRequest,
534 	     le16_to_cpu(ctrl->wValue), w_index, w_length);
535 	return -EOPNOTSUPP;
536 }
537 
538 
539 /*-------------------------------------------------------------------------*/
540 
541 /* All the following routines run in process context */
542 
543 /* Use this for bulk or interrupt transfers, not ep0 */
544 static int start_transfer(struct fsg_dev *fsg, struct usb_ep *ep,
545 			   struct usb_request *req)
546 {
547 	int	rc;
548 
549 	if (ep == fsg->bulk_in)
550 		dump_msg(fsg, "bulk-in", req->buf, req->length);
551 
552 	rc = usb_ep_queue(ep, req, GFP_KERNEL);
553 	if (rc) {
554 
555 		/* We can't do much more than wait for a reset */
556 		req->status = rc;
557 
558 		/*
559 		 * Note: currently the net2280 driver fails zero-length
560 		 * submissions if DMA is enabled.
561 		 */
562 		if (rc != -ESHUTDOWN &&
563 				!(rc == -EOPNOTSUPP && req->length == 0))
564 			WARNING(fsg, "error in submission: %s --> %d\n",
565 					ep->name, rc);
566 	}
567 	return rc;
568 }
569 
570 static bool start_in_transfer(struct fsg_common *common, struct fsg_buffhd *bh)
571 {
572 	if (!fsg_is_set(common))
573 		return false;
574 	bh->state = BUF_STATE_SENDING;
575 	if (start_transfer(common->fsg, common->fsg->bulk_in, bh->inreq))
576 		bh->state = BUF_STATE_EMPTY;
577 	return true;
578 }
579 
580 static bool start_out_transfer(struct fsg_common *common, struct fsg_buffhd *bh)
581 {
582 	if (!fsg_is_set(common))
583 		return false;
584 	bh->state = BUF_STATE_RECEIVING;
585 	if (start_transfer(common->fsg, common->fsg->bulk_out, bh->outreq))
586 		bh->state = BUF_STATE_FULL;
587 	return true;
588 }
589 
590 static int sleep_thread(struct fsg_common *common, bool can_freeze,
591 		struct fsg_buffhd *bh)
592 {
593 	int	rc;
594 
595 	/* Wait until a signal arrives or bh is no longer busy */
596 	if (can_freeze)
597 		/*
598 		 * synchronize with the smp_store_release(&bh->state) in
599 		 * bulk_in_complete() or bulk_out_complete()
600 		 */
601 		rc = wait_event_freezable(common->io_wait,
602 				bh && smp_load_acquire(&bh->state) >=
603 					BUF_STATE_EMPTY);
604 	else
605 		rc = wait_event_interruptible(common->io_wait,
606 				bh && smp_load_acquire(&bh->state) >=
607 					BUF_STATE_EMPTY);
608 	return rc ? -EINTR : 0;
609 }
610 
611 
612 /*-------------------------------------------------------------------------*/
613 
614 static int do_read(struct fsg_common *common)
615 {
616 	struct fsg_lun		*curlun = common->curlun;
617 	u32			lba;
618 	struct fsg_buffhd	*bh;
619 	int			rc;
620 	u32			amount_left;
621 	loff_t			file_offset, file_offset_tmp;
622 	unsigned int		amount;
623 	ssize_t			nread;
624 
625 	/*
626 	 * Get the starting Logical Block Address and check that it's
627 	 * not too big.
628 	 */
629 	if (common->cmnd[0] == READ_6)
630 		lba = get_unaligned_be24(&common->cmnd[1]);
631 	else {
632 		lba = get_unaligned_be32(&common->cmnd[2]);
633 
634 		/*
635 		 * We allow DPO (Disable Page Out = don't save data in the
636 		 * cache) and FUA (Force Unit Access = don't read from the
637 		 * cache), but we don't implement them.
638 		 */
639 		if ((common->cmnd[1] & ~0x18) != 0) {
640 			curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
641 			return -EINVAL;
642 		}
643 	}
644 	if (lba >= curlun->num_sectors) {
645 		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
646 		return -EINVAL;
647 	}
648 	file_offset = ((loff_t) lba) << curlun->blkbits;
649 
650 	/* Carry out the file reads */
651 	amount_left = common->data_size_from_cmnd;
652 	if (unlikely(amount_left == 0))
653 		return -EIO;		/* No default reply */
654 
655 	for (;;) {
656 		/*
657 		 * Figure out how much we need to read:
658 		 * Try to read the remaining amount.
659 		 * But don't read more than the buffer size.
660 		 * And don't try to read past the end of the file.
661 		 */
662 		amount = min(amount_left, FSG_BUFLEN);
663 		amount = min((loff_t)amount,
664 			     curlun->file_length - file_offset);
665 
666 		/* Wait for the next buffer to become available */
667 		bh = common->next_buffhd_to_fill;
668 		rc = sleep_thread(common, false, bh);
669 		if (rc)
670 			return rc;
671 
672 		/*
673 		 * If we were asked to read past the end of file,
674 		 * end with an empty buffer.
675 		 */
676 		if (amount == 0) {
677 			curlun->sense_data =
678 					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
679 			curlun->sense_data_info =
680 					file_offset >> curlun->blkbits;
681 			curlun->info_valid = 1;
682 			bh->inreq->length = 0;
683 			bh->state = BUF_STATE_FULL;
684 			break;
685 		}
686 
687 		/* Perform the read */
688 		file_offset_tmp = file_offset;
689 		nread = vfs_read(curlun->filp,
690 				 (char __user *)bh->buf,
691 				 amount, &file_offset_tmp);
692 		VLDBG(curlun, "file read %u @ %llu -> %d\n", amount,
693 		      (unsigned long long)file_offset, (int)nread);
694 		if (signal_pending(current))
695 			return -EINTR;
696 
697 		if (nread < 0) {
698 			LDBG(curlun, "error in file read: %d\n", (int)nread);
699 			nread = 0;
700 		} else if (nread < amount) {
701 			LDBG(curlun, "partial file read: %d/%u\n",
702 			     (int)nread, amount);
703 			nread = round_down(nread, curlun->blksize);
704 		}
705 		file_offset  += nread;
706 		amount_left  -= nread;
707 		common->residue -= nread;
708 
709 		/*
710 		 * Except at the end of the transfer, nread will be
711 		 * equal to the buffer size, which is divisible by the
712 		 * bulk-in maxpacket size.
713 		 */
714 		bh->inreq->length = nread;
715 		bh->state = BUF_STATE_FULL;
716 
717 		/* If an error occurred, report it and its position */
718 		if (nread < amount) {
719 			curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
720 			curlun->sense_data_info =
721 					file_offset >> curlun->blkbits;
722 			curlun->info_valid = 1;
723 			break;
724 		}
725 
726 		if (amount_left == 0)
727 			break;		/* No more left to read */
728 
729 		/* Send this buffer and go read some more */
730 		bh->inreq->zero = 0;
731 		if (!start_in_transfer(common, bh))
732 			/* Don't know what to do if common->fsg is NULL */
733 			return -EIO;
734 		common->next_buffhd_to_fill = bh->next;
735 	}
736 
737 	return -EIO;		/* No default reply */
738 }
739 
740 
741 /*-------------------------------------------------------------------------*/
742 
743 static int do_write(struct fsg_common *common)
744 {
745 	struct fsg_lun		*curlun = common->curlun;
746 	u32			lba;
747 	struct fsg_buffhd	*bh;
748 	int			get_some_more;
749 	u32			amount_left_to_req, amount_left_to_write;
750 	loff_t			usb_offset, file_offset, file_offset_tmp;
751 	unsigned int		amount;
752 	ssize_t			nwritten;
753 	int			rc;
754 
755 	if (curlun->ro) {
756 		curlun->sense_data = SS_WRITE_PROTECTED;
757 		return -EINVAL;
758 	}
759 	spin_lock(&curlun->filp->f_lock);
760 	curlun->filp->f_flags &= ~O_SYNC;	/* Default is not to wait */
761 	spin_unlock(&curlun->filp->f_lock);
762 
763 	/*
764 	 * Get the starting Logical Block Address and check that it's
765 	 * not too big
766 	 */
767 	if (common->cmnd[0] == WRITE_6)
768 		lba = get_unaligned_be24(&common->cmnd[1]);
769 	else {
770 		lba = get_unaligned_be32(&common->cmnd[2]);
771 
772 		/*
773 		 * We allow DPO (Disable Page Out = don't save data in the
774 		 * cache) and FUA (Force Unit Access = write directly to the
775 		 * medium).  We don't implement DPO; we implement FUA by
776 		 * performing synchronous output.
777 		 */
778 		if (common->cmnd[1] & ~0x18) {
779 			curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
780 			return -EINVAL;
781 		}
782 		if (!curlun->nofua && (common->cmnd[1] & 0x08)) { /* FUA */
783 			spin_lock(&curlun->filp->f_lock);
784 			curlun->filp->f_flags |= O_SYNC;
785 			spin_unlock(&curlun->filp->f_lock);
786 		}
787 	}
788 	if (lba >= curlun->num_sectors) {
789 		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
790 		return -EINVAL;
791 	}
792 
793 	/* Carry out the file writes */
794 	get_some_more = 1;
795 	file_offset = usb_offset = ((loff_t) lba) << curlun->blkbits;
796 	amount_left_to_req = common->data_size_from_cmnd;
797 	amount_left_to_write = common->data_size_from_cmnd;
798 
799 	while (amount_left_to_write > 0) {
800 
801 		/* Queue a request for more data from the host */
802 		bh = common->next_buffhd_to_fill;
803 		if (bh->state == BUF_STATE_EMPTY && get_some_more) {
804 
805 			/*
806 			 * Figure out how much we want to get:
807 			 * Try to get the remaining amount,
808 			 * but not more than the buffer size.
809 			 */
810 			amount = min(amount_left_to_req, FSG_BUFLEN);
811 
812 			/* Beyond the end of the backing file? */
813 			if (usb_offset >= curlun->file_length) {
814 				get_some_more = 0;
815 				curlun->sense_data =
816 					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
817 				curlun->sense_data_info =
818 					usb_offset >> curlun->blkbits;
819 				curlun->info_valid = 1;
820 				continue;
821 			}
822 
823 			/* Get the next buffer */
824 			usb_offset += amount;
825 			common->usb_amount_left -= amount;
826 			amount_left_to_req -= amount;
827 			if (amount_left_to_req == 0)
828 				get_some_more = 0;
829 
830 			/*
831 			 * Except at the end of the transfer, amount will be
832 			 * equal to the buffer size, which is divisible by
833 			 * the bulk-out maxpacket size.
834 			 */
835 			set_bulk_out_req_length(common, bh, amount);
836 			if (!start_out_transfer(common, bh))
837 				/* Dunno what to do if common->fsg is NULL */
838 				return -EIO;
839 			common->next_buffhd_to_fill = bh->next;
840 			continue;
841 		}
842 
843 		/* Write the received data to the backing file */
844 		bh = common->next_buffhd_to_drain;
845 		if (bh->state == BUF_STATE_EMPTY && !get_some_more)
846 			break;			/* We stopped early */
847 
848 		/* Wait for the data to be received */
849 		rc = sleep_thread(common, false, bh);
850 		if (rc)
851 			return rc;
852 
853 		common->next_buffhd_to_drain = bh->next;
854 		bh->state = BUF_STATE_EMPTY;
855 
856 		/* Did something go wrong with the transfer? */
857 		if (bh->outreq->status != 0) {
858 			curlun->sense_data = SS_COMMUNICATION_FAILURE;
859 			curlun->sense_data_info =
860 					file_offset >> curlun->blkbits;
861 			curlun->info_valid = 1;
862 			break;
863 		}
864 
865 		amount = bh->outreq->actual;
866 		if (curlun->file_length - file_offset < amount) {
867 			LERROR(curlun, "write %u @ %llu beyond end %llu\n",
868 				       amount, (unsigned long long)file_offset,
869 				       (unsigned long long)curlun->file_length);
870 			amount = curlun->file_length - file_offset;
871 		}
872 
873 		/*
874 		 * Don't accept excess data.  The spec doesn't say
875 		 * what to do in this case.  We'll ignore the error.
876 		 */
877 		amount = min(amount, bh->bulk_out_intended_length);
878 
879 		/* Don't write a partial block */
880 		amount = round_down(amount, curlun->blksize);
881 		if (amount == 0)
882 			goto empty_write;
883 
884 		/* Perform the write */
885 		file_offset_tmp = file_offset;
886 		nwritten = vfs_write(curlun->filp, (char __user *)bh->buf,
887 				amount, &file_offset_tmp);
888 		VLDBG(curlun, "file write %u @ %llu -> %d\n", amount,
889 				(unsigned long long)file_offset, (int)nwritten);
890 		if (signal_pending(current))
891 			return -EINTR;		/* Interrupted! */
892 
893 		if (nwritten < 0) {
894 			LDBG(curlun, "error in file write: %d\n",
895 					(int) nwritten);
896 			nwritten = 0;
897 		} else if (nwritten < amount) {
898 			LDBG(curlun, "partial file write: %d/%u\n",
899 					(int) nwritten, amount);
900 			nwritten = round_down(nwritten, curlun->blksize);
901 		}
902 		file_offset += nwritten;
903 		amount_left_to_write -= nwritten;
904 		common->residue -= nwritten;
905 
906 		/* If an error occurred, report it and its position */
907 		if (nwritten < amount) {
908 			curlun->sense_data = SS_WRITE_ERROR;
909 			curlun->sense_data_info =
910 					file_offset >> curlun->blkbits;
911 			curlun->info_valid = 1;
912 			break;
913 		}
914 
915  empty_write:
916 		/* Did the host decide to stop early? */
917 		if (bh->outreq->actual < bh->bulk_out_intended_length) {
918 			common->short_packet_received = 1;
919 			break;
920 		}
921 	}
922 
923 	return -EIO;		/* No default reply */
924 }
925 
926 
927 /*-------------------------------------------------------------------------*/
928 
929 static int do_synchronize_cache(struct fsg_common *common)
930 {
931 	struct fsg_lun	*curlun = common->curlun;
932 	int		rc;
933 
934 	/* We ignore the requested LBA and write out all file's
935 	 * dirty data buffers. */
936 	rc = fsg_lun_fsync_sub(curlun);
937 	if (rc)
938 		curlun->sense_data = SS_WRITE_ERROR;
939 	return 0;
940 }
941 
942 
943 /*-------------------------------------------------------------------------*/
944 
945 static void invalidate_sub(struct fsg_lun *curlun)
946 {
947 	struct file	*filp = curlun->filp;
948 	struct inode	*inode = file_inode(filp);
949 	unsigned long	rc;
950 
951 	rc = invalidate_mapping_pages(inode->i_mapping, 0, -1);
952 	VLDBG(curlun, "invalidate_mapping_pages -> %ld\n", rc);
953 }
954 
955 static int do_verify(struct fsg_common *common)
956 {
957 	struct fsg_lun		*curlun = common->curlun;
958 	u32			lba;
959 	u32			verification_length;
960 	struct fsg_buffhd	*bh = common->next_buffhd_to_fill;
961 	loff_t			file_offset, file_offset_tmp;
962 	u32			amount_left;
963 	unsigned int		amount;
964 	ssize_t			nread;
965 
966 	/*
967 	 * Get the starting Logical Block Address and check that it's
968 	 * not too big.
969 	 */
970 	lba = get_unaligned_be32(&common->cmnd[2]);
971 	if (lba >= curlun->num_sectors) {
972 		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
973 		return -EINVAL;
974 	}
975 
976 	/*
977 	 * We allow DPO (Disable Page Out = don't save data in the
978 	 * cache) but we don't implement it.
979 	 */
980 	if (common->cmnd[1] & ~0x10) {
981 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
982 		return -EINVAL;
983 	}
984 
985 	verification_length = get_unaligned_be16(&common->cmnd[7]);
986 	if (unlikely(verification_length == 0))
987 		return -EIO;		/* No default reply */
988 
989 	/* Prepare to carry out the file verify */
990 	amount_left = verification_length << curlun->blkbits;
991 	file_offset = ((loff_t) lba) << curlun->blkbits;
992 
993 	/* Write out all the dirty buffers before invalidating them */
994 	fsg_lun_fsync_sub(curlun);
995 	if (signal_pending(current))
996 		return -EINTR;
997 
998 	invalidate_sub(curlun);
999 	if (signal_pending(current))
1000 		return -EINTR;
1001 
1002 	/* Just try to read the requested blocks */
1003 	while (amount_left > 0) {
1004 		/*
1005 		 * Figure out how much we need to read:
1006 		 * Try to read the remaining amount, but not more than
1007 		 * the buffer size.
1008 		 * And don't try to read past the end of the file.
1009 		 */
1010 		amount = min(amount_left, FSG_BUFLEN);
1011 		amount = min((loff_t)amount,
1012 			     curlun->file_length - file_offset);
1013 		if (amount == 0) {
1014 			curlun->sense_data =
1015 					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
1016 			curlun->sense_data_info =
1017 				file_offset >> curlun->blkbits;
1018 			curlun->info_valid = 1;
1019 			break;
1020 		}
1021 
1022 		/* Perform the read */
1023 		file_offset_tmp = file_offset;
1024 		nread = vfs_read(curlun->filp,
1025 				(char __user *) bh->buf,
1026 				amount, &file_offset_tmp);
1027 		VLDBG(curlun, "file read %u @ %llu -> %d\n", amount,
1028 				(unsigned long long) file_offset,
1029 				(int) nread);
1030 		if (signal_pending(current))
1031 			return -EINTR;
1032 
1033 		if (nread < 0) {
1034 			LDBG(curlun, "error in file verify: %d\n", (int)nread);
1035 			nread = 0;
1036 		} else if (nread < amount) {
1037 			LDBG(curlun, "partial file verify: %d/%u\n",
1038 			     (int)nread, amount);
1039 			nread = round_down(nread, curlun->blksize);
1040 		}
1041 		if (nread == 0) {
1042 			curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
1043 			curlun->sense_data_info =
1044 				file_offset >> curlun->blkbits;
1045 			curlun->info_valid = 1;
1046 			break;
1047 		}
1048 		file_offset += nread;
1049 		amount_left -= nread;
1050 	}
1051 	return 0;
1052 }
1053 
1054 
1055 /*-------------------------------------------------------------------------*/
1056 
1057 static int do_inquiry(struct fsg_common *common, struct fsg_buffhd *bh)
1058 {
1059 	struct fsg_lun *curlun = common->curlun;
1060 	u8	*buf = (u8 *) bh->buf;
1061 
1062 	if (!curlun) {		/* Unsupported LUNs are okay */
1063 		common->bad_lun_okay = 1;
1064 		memset(buf, 0, 36);
1065 		buf[0] = TYPE_NO_LUN;	/* Unsupported, no device-type */
1066 		buf[4] = 31;		/* Additional length */
1067 		return 36;
1068 	}
1069 
1070 	buf[0] = curlun->cdrom ? TYPE_ROM : TYPE_DISK;
1071 	buf[1] = curlun->removable ? 0x80 : 0;
1072 	buf[2] = 2;		/* ANSI SCSI level 2 */
1073 	buf[3] = 2;		/* SCSI-2 INQUIRY data format */
1074 	buf[4] = 31;		/* Additional length */
1075 	buf[5] = 0;		/* No special options */
1076 	buf[6] = 0;
1077 	buf[7] = 0;
1078 	if (curlun->inquiry_string[0])
1079 		memcpy(buf + 8, curlun->inquiry_string,
1080 		       sizeof(curlun->inquiry_string));
1081 	else
1082 		memcpy(buf + 8, common->inquiry_string,
1083 		       sizeof(common->inquiry_string));
1084 	return 36;
1085 }
1086 
1087 static int do_request_sense(struct fsg_common *common, struct fsg_buffhd *bh)
1088 {
1089 	struct fsg_lun	*curlun = common->curlun;
1090 	u8		*buf = (u8 *) bh->buf;
1091 	u32		sd, sdinfo;
1092 	int		valid;
1093 
1094 	/*
1095 	 * From the SCSI-2 spec., section 7.9 (Unit attention condition):
1096 	 *
1097 	 * If a REQUEST SENSE command is received from an initiator
1098 	 * with a pending unit attention condition (before the target
1099 	 * generates the contingent allegiance condition), then the
1100 	 * target shall either:
1101 	 *   a) report any pending sense data and preserve the unit
1102 	 *	attention condition on the logical unit, or,
1103 	 *   b) report the unit attention condition, may discard any
1104 	 *	pending sense data, and clear the unit attention
1105 	 *	condition on the logical unit for that initiator.
1106 	 *
1107 	 * FSG normally uses option a); enable this code to use option b).
1108 	 */
1109 #if 0
1110 	if (curlun && curlun->unit_attention_data != SS_NO_SENSE) {
1111 		curlun->sense_data = curlun->unit_attention_data;
1112 		curlun->unit_attention_data = SS_NO_SENSE;
1113 	}
1114 #endif
1115 
1116 	if (!curlun) {		/* Unsupported LUNs are okay */
1117 		common->bad_lun_okay = 1;
1118 		sd = SS_LOGICAL_UNIT_NOT_SUPPORTED;
1119 		sdinfo = 0;
1120 		valid = 0;
1121 	} else {
1122 		sd = curlun->sense_data;
1123 		sdinfo = curlun->sense_data_info;
1124 		valid = curlun->info_valid << 7;
1125 		curlun->sense_data = SS_NO_SENSE;
1126 		curlun->sense_data_info = 0;
1127 		curlun->info_valid = 0;
1128 	}
1129 
1130 	memset(buf, 0, 18);
1131 	buf[0] = valid | 0x70;			/* Valid, current error */
1132 	buf[2] = SK(sd);
1133 	put_unaligned_be32(sdinfo, &buf[3]);	/* Sense information */
1134 	buf[7] = 18 - 8;			/* Additional sense length */
1135 	buf[12] = ASC(sd);
1136 	buf[13] = ASCQ(sd);
1137 	return 18;
1138 }
1139 
1140 static int do_read_capacity(struct fsg_common *common, struct fsg_buffhd *bh)
1141 {
1142 	struct fsg_lun	*curlun = common->curlun;
1143 	u32		lba = get_unaligned_be32(&common->cmnd[2]);
1144 	int		pmi = common->cmnd[8];
1145 	u8		*buf = (u8 *)bh->buf;
1146 
1147 	/* Check the PMI and LBA fields */
1148 	if (pmi > 1 || (pmi == 0 && lba != 0)) {
1149 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1150 		return -EINVAL;
1151 	}
1152 
1153 	put_unaligned_be32(curlun->num_sectors - 1, &buf[0]);
1154 						/* Max logical block */
1155 	put_unaligned_be32(curlun->blksize, &buf[4]);/* Block length */
1156 	return 8;
1157 }
1158 
1159 static int do_read_header(struct fsg_common *common, struct fsg_buffhd *bh)
1160 {
1161 	struct fsg_lun	*curlun = common->curlun;
1162 	int		msf = common->cmnd[1] & 0x02;
1163 	u32		lba = get_unaligned_be32(&common->cmnd[2]);
1164 	u8		*buf = (u8 *)bh->buf;
1165 
1166 	if (common->cmnd[1] & ~0x02) {		/* Mask away MSF */
1167 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1168 		return -EINVAL;
1169 	}
1170 	if (lba >= curlun->num_sectors) {
1171 		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
1172 		return -EINVAL;
1173 	}
1174 
1175 	memset(buf, 0, 8);
1176 	buf[0] = 0x01;		/* 2048 bytes of user data, rest is EC */
1177 	store_cdrom_address(&buf[4], msf, lba);
1178 	return 8;
1179 }
1180 
1181 static int do_read_toc(struct fsg_common *common, struct fsg_buffhd *bh)
1182 {
1183 	struct fsg_lun	*curlun = common->curlun;
1184 	int		msf = common->cmnd[1] & 0x02;
1185 	int		start_track = common->cmnd[6];
1186 	u8		*buf = (u8 *)bh->buf;
1187 
1188 	if ((common->cmnd[1] & ~0x02) != 0 ||	/* Mask away MSF */
1189 			start_track > 1) {
1190 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1191 		return -EINVAL;
1192 	}
1193 
1194 	memset(buf, 0, 20);
1195 	buf[1] = (20-2);		/* TOC data length */
1196 	buf[2] = 1;			/* First track number */
1197 	buf[3] = 1;			/* Last track number */
1198 	buf[5] = 0x16;			/* Data track, copying allowed */
1199 	buf[6] = 0x01;			/* Only track is number 1 */
1200 	store_cdrom_address(&buf[8], msf, 0);
1201 
1202 	buf[13] = 0x16;			/* Lead-out track is data */
1203 	buf[14] = 0xAA;			/* Lead-out track number */
1204 	store_cdrom_address(&buf[16], msf, curlun->num_sectors);
1205 	return 20;
1206 }
1207 
1208 static int do_mode_sense(struct fsg_common *common, struct fsg_buffhd *bh)
1209 {
1210 	struct fsg_lun	*curlun = common->curlun;
1211 	int		mscmnd = common->cmnd[0];
1212 	u8		*buf = (u8 *) bh->buf;
1213 	u8		*buf0 = buf;
1214 	int		pc, page_code;
1215 	int		changeable_values, all_pages;
1216 	int		valid_page = 0;
1217 	int		len, limit;
1218 
1219 	if ((common->cmnd[1] & ~0x08) != 0) {	/* Mask away DBD */
1220 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1221 		return -EINVAL;
1222 	}
1223 	pc = common->cmnd[2] >> 6;
1224 	page_code = common->cmnd[2] & 0x3f;
1225 	if (pc == 3) {
1226 		curlun->sense_data = SS_SAVING_PARAMETERS_NOT_SUPPORTED;
1227 		return -EINVAL;
1228 	}
1229 	changeable_values = (pc == 1);
1230 	all_pages = (page_code == 0x3f);
1231 
1232 	/*
1233 	 * Write the mode parameter header.  Fixed values are: default
1234 	 * medium type, no cache control (DPOFUA), and no block descriptors.
1235 	 * The only variable value is the WriteProtect bit.  We will fill in
1236 	 * the mode data length later.
1237 	 */
1238 	memset(buf, 0, 8);
1239 	if (mscmnd == MODE_SENSE) {
1240 		buf[2] = (curlun->ro ? 0x80 : 0x00);		/* WP, DPOFUA */
1241 		buf += 4;
1242 		limit = 255;
1243 	} else {			/* MODE_SENSE_10 */
1244 		buf[3] = (curlun->ro ? 0x80 : 0x00);		/* WP, DPOFUA */
1245 		buf += 8;
1246 		limit = 65535;		/* Should really be FSG_BUFLEN */
1247 	}
1248 
1249 	/* No block descriptors */
1250 
1251 	/*
1252 	 * The mode pages, in numerical order.  The only page we support
1253 	 * is the Caching page.
1254 	 */
1255 	if (page_code == 0x08 || all_pages) {
1256 		valid_page = 1;
1257 		buf[0] = 0x08;		/* Page code */
1258 		buf[1] = 10;		/* Page length */
1259 		memset(buf+2, 0, 10);	/* None of the fields are changeable */
1260 
1261 		if (!changeable_values) {
1262 			buf[2] = 0x04;	/* Write cache enable, */
1263 					/* Read cache not disabled */
1264 					/* No cache retention priorities */
1265 			put_unaligned_be16(0xffff, &buf[4]);
1266 					/* Don't disable prefetch */
1267 					/* Minimum prefetch = 0 */
1268 			put_unaligned_be16(0xffff, &buf[8]);
1269 					/* Maximum prefetch */
1270 			put_unaligned_be16(0xffff, &buf[10]);
1271 					/* Maximum prefetch ceiling */
1272 		}
1273 		buf += 12;
1274 	}
1275 
1276 	/*
1277 	 * Check that a valid page was requested and the mode data length
1278 	 * isn't too long.
1279 	 */
1280 	len = buf - buf0;
1281 	if (!valid_page || len > limit) {
1282 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1283 		return -EINVAL;
1284 	}
1285 
1286 	/*  Store the mode data length */
1287 	if (mscmnd == MODE_SENSE)
1288 		buf0[0] = len - 1;
1289 	else
1290 		put_unaligned_be16(len - 2, buf0);
1291 	return len;
1292 }
1293 
1294 static int do_start_stop(struct fsg_common *common)
1295 {
1296 	struct fsg_lun	*curlun = common->curlun;
1297 	int		loej, start;
1298 
1299 	if (!curlun) {
1300 		return -EINVAL;
1301 	} else if (!curlun->removable) {
1302 		curlun->sense_data = SS_INVALID_COMMAND;
1303 		return -EINVAL;
1304 	} else if ((common->cmnd[1] & ~0x01) != 0 || /* Mask away Immed */
1305 		   (common->cmnd[4] & ~0x03) != 0) { /* Mask LoEj, Start */
1306 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1307 		return -EINVAL;
1308 	}
1309 
1310 	loej  = common->cmnd[4] & 0x02;
1311 	start = common->cmnd[4] & 0x01;
1312 
1313 	/*
1314 	 * Our emulation doesn't support mounting; the medium is
1315 	 * available for use as soon as it is loaded.
1316 	 */
1317 	if (start) {
1318 		if (!fsg_lun_is_open(curlun)) {
1319 			curlun->sense_data = SS_MEDIUM_NOT_PRESENT;
1320 			return -EINVAL;
1321 		}
1322 		return 0;
1323 	}
1324 
1325 	/* Are we allowed to unload the media? */
1326 	if (curlun->prevent_medium_removal) {
1327 		LDBG(curlun, "unload attempt prevented\n");
1328 		curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED;
1329 		return -EINVAL;
1330 	}
1331 
1332 	if (!loej)
1333 		return 0;
1334 
1335 	up_read(&common->filesem);
1336 	down_write(&common->filesem);
1337 	fsg_lun_close(curlun);
1338 	up_write(&common->filesem);
1339 	down_read(&common->filesem);
1340 
1341 	return 0;
1342 }
1343 
1344 static int do_prevent_allow(struct fsg_common *common)
1345 {
1346 	struct fsg_lun	*curlun = common->curlun;
1347 	int		prevent;
1348 
1349 	if (!common->curlun) {
1350 		return -EINVAL;
1351 	} else if (!common->curlun->removable) {
1352 		common->curlun->sense_data = SS_INVALID_COMMAND;
1353 		return -EINVAL;
1354 	}
1355 
1356 	prevent = common->cmnd[4] & 0x01;
1357 	if ((common->cmnd[4] & ~0x01) != 0) {	/* Mask away Prevent */
1358 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1359 		return -EINVAL;
1360 	}
1361 
1362 	if (curlun->prevent_medium_removal && !prevent)
1363 		fsg_lun_fsync_sub(curlun);
1364 	curlun->prevent_medium_removal = prevent;
1365 	return 0;
1366 }
1367 
1368 static int do_read_format_capacities(struct fsg_common *common,
1369 			struct fsg_buffhd *bh)
1370 {
1371 	struct fsg_lun	*curlun = common->curlun;
1372 	u8		*buf = (u8 *) bh->buf;
1373 
1374 	buf[0] = buf[1] = buf[2] = 0;
1375 	buf[3] = 8;	/* Only the Current/Maximum Capacity Descriptor */
1376 	buf += 4;
1377 
1378 	put_unaligned_be32(curlun->num_sectors, &buf[0]);
1379 						/* Number of blocks */
1380 	put_unaligned_be32(curlun->blksize, &buf[4]);/* Block length */
1381 	buf[4] = 0x02;				/* Current capacity */
1382 	return 12;
1383 }
1384 
1385 static int do_mode_select(struct fsg_common *common, struct fsg_buffhd *bh)
1386 {
1387 	struct fsg_lun	*curlun = common->curlun;
1388 
1389 	/* We don't support MODE SELECT */
1390 	if (curlun)
1391 		curlun->sense_data = SS_INVALID_COMMAND;
1392 	return -EINVAL;
1393 }
1394 
1395 
1396 /*-------------------------------------------------------------------------*/
1397 
1398 static int halt_bulk_in_endpoint(struct fsg_dev *fsg)
1399 {
1400 	int	rc;
1401 
1402 	rc = fsg_set_halt(fsg, fsg->bulk_in);
1403 	if (rc == -EAGAIN)
1404 		VDBG(fsg, "delayed bulk-in endpoint halt\n");
1405 	while (rc != 0) {
1406 		if (rc != -EAGAIN) {
1407 			WARNING(fsg, "usb_ep_set_halt -> %d\n", rc);
1408 			rc = 0;
1409 			break;
1410 		}
1411 
1412 		/* Wait for a short time and then try again */
1413 		if (msleep_interruptible(100) != 0)
1414 			return -EINTR;
1415 		rc = usb_ep_set_halt(fsg->bulk_in);
1416 	}
1417 	return rc;
1418 }
1419 
1420 static int wedge_bulk_in_endpoint(struct fsg_dev *fsg)
1421 {
1422 	int	rc;
1423 
1424 	DBG(fsg, "bulk-in set wedge\n");
1425 	rc = usb_ep_set_wedge(fsg->bulk_in);
1426 	if (rc == -EAGAIN)
1427 		VDBG(fsg, "delayed bulk-in endpoint wedge\n");
1428 	while (rc != 0) {
1429 		if (rc != -EAGAIN) {
1430 			WARNING(fsg, "usb_ep_set_wedge -> %d\n", rc);
1431 			rc = 0;
1432 			break;
1433 		}
1434 
1435 		/* Wait for a short time and then try again */
1436 		if (msleep_interruptible(100) != 0)
1437 			return -EINTR;
1438 		rc = usb_ep_set_wedge(fsg->bulk_in);
1439 	}
1440 	return rc;
1441 }
1442 
1443 static int throw_away_data(struct fsg_common *common)
1444 {
1445 	struct fsg_buffhd	*bh, *bh2;
1446 	u32			amount;
1447 	int			rc;
1448 
1449 	for (bh = common->next_buffhd_to_drain;
1450 	     bh->state != BUF_STATE_EMPTY || common->usb_amount_left > 0;
1451 	     bh = common->next_buffhd_to_drain) {
1452 
1453 		/* Try to submit another request if we need one */
1454 		bh2 = common->next_buffhd_to_fill;
1455 		if (bh2->state == BUF_STATE_EMPTY &&
1456 				common->usb_amount_left > 0) {
1457 			amount = min(common->usb_amount_left, FSG_BUFLEN);
1458 
1459 			/*
1460 			 * Except at the end of the transfer, amount will be
1461 			 * equal to the buffer size, which is divisible by
1462 			 * the bulk-out maxpacket size.
1463 			 */
1464 			set_bulk_out_req_length(common, bh2, amount);
1465 			if (!start_out_transfer(common, bh2))
1466 				/* Dunno what to do if common->fsg is NULL */
1467 				return -EIO;
1468 			common->next_buffhd_to_fill = bh2->next;
1469 			common->usb_amount_left -= amount;
1470 			continue;
1471 		}
1472 
1473 		/* Wait for the data to be received */
1474 		rc = sleep_thread(common, false, bh);
1475 		if (rc)
1476 			return rc;
1477 
1478 		/* Throw away the data in a filled buffer */
1479 		bh->state = BUF_STATE_EMPTY;
1480 		common->next_buffhd_to_drain = bh->next;
1481 
1482 		/* A short packet or an error ends everything */
1483 		if (bh->outreq->actual < bh->bulk_out_intended_length ||
1484 				bh->outreq->status != 0) {
1485 			raise_exception(common, FSG_STATE_ABORT_BULK_OUT);
1486 			return -EINTR;
1487 		}
1488 	}
1489 	return 0;
1490 }
1491 
1492 static int finish_reply(struct fsg_common *common)
1493 {
1494 	struct fsg_buffhd	*bh = common->next_buffhd_to_fill;
1495 	int			rc = 0;
1496 
1497 	switch (common->data_dir) {
1498 	case DATA_DIR_NONE:
1499 		break;			/* Nothing to send */
1500 
1501 	/*
1502 	 * If we don't know whether the host wants to read or write,
1503 	 * this must be CB or CBI with an unknown command.  We mustn't
1504 	 * try to send or receive any data.  So stall both bulk pipes
1505 	 * if we can and wait for a reset.
1506 	 */
1507 	case DATA_DIR_UNKNOWN:
1508 		if (!common->can_stall) {
1509 			/* Nothing */
1510 		} else if (fsg_is_set(common)) {
1511 			fsg_set_halt(common->fsg, common->fsg->bulk_out);
1512 			rc = halt_bulk_in_endpoint(common->fsg);
1513 		} else {
1514 			/* Don't know what to do if common->fsg is NULL */
1515 			rc = -EIO;
1516 		}
1517 		break;
1518 
1519 	/* All but the last buffer of data must have already been sent */
1520 	case DATA_DIR_TO_HOST:
1521 		if (common->data_size == 0) {
1522 			/* Nothing to send */
1523 
1524 		/* Don't know what to do if common->fsg is NULL */
1525 		} else if (!fsg_is_set(common)) {
1526 			rc = -EIO;
1527 
1528 		/* If there's no residue, simply send the last buffer */
1529 		} else if (common->residue == 0) {
1530 			bh->inreq->zero = 0;
1531 			if (!start_in_transfer(common, bh))
1532 				return -EIO;
1533 			common->next_buffhd_to_fill = bh->next;
1534 
1535 		/*
1536 		 * For Bulk-only, mark the end of the data with a short
1537 		 * packet.  If we are allowed to stall, halt the bulk-in
1538 		 * endpoint.  (Note: This violates the Bulk-Only Transport
1539 		 * specification, which requires us to pad the data if we
1540 		 * don't halt the endpoint.  Presumably nobody will mind.)
1541 		 */
1542 		} else {
1543 			bh->inreq->zero = 1;
1544 			if (!start_in_transfer(common, bh))
1545 				rc = -EIO;
1546 			common->next_buffhd_to_fill = bh->next;
1547 			if (common->can_stall)
1548 				rc = halt_bulk_in_endpoint(common->fsg);
1549 		}
1550 		break;
1551 
1552 	/*
1553 	 * We have processed all we want from the data the host has sent.
1554 	 * There may still be outstanding bulk-out requests.
1555 	 */
1556 	case DATA_DIR_FROM_HOST:
1557 		if (common->residue == 0) {
1558 			/* Nothing to receive */
1559 
1560 		/* Did the host stop sending unexpectedly early? */
1561 		} else if (common->short_packet_received) {
1562 			raise_exception(common, FSG_STATE_ABORT_BULK_OUT);
1563 			rc = -EINTR;
1564 
1565 		/*
1566 		 * We haven't processed all the incoming data.  Even though
1567 		 * we may be allowed to stall, doing so would cause a race.
1568 		 * The controller may already have ACK'ed all the remaining
1569 		 * bulk-out packets, in which case the host wouldn't see a
1570 		 * STALL.  Not realizing the endpoint was halted, it wouldn't
1571 		 * clear the halt -- leading to problems later on.
1572 		 */
1573 #if 0
1574 		} else if (common->can_stall) {
1575 			if (fsg_is_set(common))
1576 				fsg_set_halt(common->fsg,
1577 					     common->fsg->bulk_out);
1578 			raise_exception(common, FSG_STATE_ABORT_BULK_OUT);
1579 			rc = -EINTR;
1580 #endif
1581 
1582 		/*
1583 		 * We can't stall.  Read in the excess data and throw it
1584 		 * all away.
1585 		 */
1586 		} else {
1587 			rc = throw_away_data(common);
1588 		}
1589 		break;
1590 	}
1591 	return rc;
1592 }
1593 
1594 static void send_status(struct fsg_common *common)
1595 {
1596 	struct fsg_lun		*curlun = common->curlun;
1597 	struct fsg_buffhd	*bh;
1598 	struct bulk_cs_wrap	*csw;
1599 	int			rc;
1600 	u8			status = US_BULK_STAT_OK;
1601 	u32			sd, sdinfo = 0;
1602 
1603 	/* Wait for the next buffer to become available */
1604 	bh = common->next_buffhd_to_fill;
1605 	rc = sleep_thread(common, false, bh);
1606 	if (rc)
1607 		return;
1608 
1609 	if (curlun) {
1610 		sd = curlun->sense_data;
1611 		sdinfo = curlun->sense_data_info;
1612 	} else if (common->bad_lun_okay)
1613 		sd = SS_NO_SENSE;
1614 	else
1615 		sd = SS_LOGICAL_UNIT_NOT_SUPPORTED;
1616 
1617 	if (common->phase_error) {
1618 		DBG(common, "sending phase-error status\n");
1619 		status = US_BULK_STAT_PHASE;
1620 		sd = SS_INVALID_COMMAND;
1621 	} else if (sd != SS_NO_SENSE) {
1622 		DBG(common, "sending command-failure status\n");
1623 		status = US_BULK_STAT_FAIL;
1624 		VDBG(common, "  sense data: SK x%02x, ASC x%02x, ASCQ x%02x;"
1625 				"  info x%x\n",
1626 				SK(sd), ASC(sd), ASCQ(sd), sdinfo);
1627 	}
1628 
1629 	/* Store and send the Bulk-only CSW */
1630 	csw = (void *)bh->buf;
1631 
1632 	csw->Signature = cpu_to_le32(US_BULK_CS_SIGN);
1633 	csw->Tag = common->tag;
1634 	csw->Residue = cpu_to_le32(common->residue);
1635 	csw->Status = status;
1636 
1637 	bh->inreq->length = US_BULK_CS_WRAP_LEN;
1638 	bh->inreq->zero = 0;
1639 	if (!start_in_transfer(common, bh))
1640 		/* Don't know what to do if common->fsg is NULL */
1641 		return;
1642 
1643 	common->next_buffhd_to_fill = bh->next;
1644 	return;
1645 }
1646 
1647 
1648 /*-------------------------------------------------------------------------*/
1649 
1650 /*
1651  * Check whether the command is properly formed and whether its data size
1652  * and direction agree with the values we already have.
1653  */
1654 static int check_command(struct fsg_common *common, int cmnd_size,
1655 			 enum data_direction data_dir, unsigned int mask,
1656 			 int needs_medium, const char *name)
1657 {
1658 	int			i;
1659 	unsigned int		lun = common->cmnd[1] >> 5;
1660 	static const char	dirletter[4] = {'u', 'o', 'i', 'n'};
1661 	char			hdlen[20];
1662 	struct fsg_lun		*curlun;
1663 
1664 	hdlen[0] = 0;
1665 	if (common->data_dir != DATA_DIR_UNKNOWN)
1666 		sprintf(hdlen, ", H%c=%u", dirletter[(int) common->data_dir],
1667 			common->data_size);
1668 	VDBG(common, "SCSI command: %s;  Dc=%d, D%c=%u;  Hc=%d%s\n",
1669 	     name, cmnd_size, dirletter[(int) data_dir],
1670 	     common->data_size_from_cmnd, common->cmnd_size, hdlen);
1671 
1672 	/*
1673 	 * We can't reply at all until we know the correct data direction
1674 	 * and size.
1675 	 */
1676 	if (common->data_size_from_cmnd == 0)
1677 		data_dir = DATA_DIR_NONE;
1678 	if (common->data_size < common->data_size_from_cmnd) {
1679 		/*
1680 		 * Host data size < Device data size is a phase error.
1681 		 * Carry out the command, but only transfer as much as
1682 		 * we are allowed.
1683 		 */
1684 		common->data_size_from_cmnd = common->data_size;
1685 		common->phase_error = 1;
1686 	}
1687 	common->residue = common->data_size;
1688 	common->usb_amount_left = common->data_size;
1689 
1690 	/* Conflicting data directions is a phase error */
1691 	if (common->data_dir != data_dir && common->data_size_from_cmnd > 0) {
1692 		common->phase_error = 1;
1693 		return -EINVAL;
1694 	}
1695 
1696 	/* Verify the length of the command itself */
1697 	if (cmnd_size != common->cmnd_size) {
1698 
1699 		/*
1700 		 * Special case workaround: There are plenty of buggy SCSI
1701 		 * implementations. Many have issues with cbw->Length
1702 		 * field passing a wrong command size. For those cases we
1703 		 * always try to work around the problem by using the length
1704 		 * sent by the host side provided it is at least as large
1705 		 * as the correct command length.
1706 		 * Examples of such cases would be MS-Windows, which issues
1707 		 * REQUEST SENSE with cbw->Length == 12 where it should
1708 		 * be 6, and xbox360 issuing INQUIRY, TEST UNIT READY and
1709 		 * REQUEST SENSE with cbw->Length == 10 where it should
1710 		 * be 6 as well.
1711 		 */
1712 		if (cmnd_size <= common->cmnd_size) {
1713 			DBG(common, "%s is buggy! Expected length %d "
1714 			    "but we got %d\n", name,
1715 			    cmnd_size, common->cmnd_size);
1716 			cmnd_size = common->cmnd_size;
1717 		} else {
1718 			common->phase_error = 1;
1719 			return -EINVAL;
1720 		}
1721 	}
1722 
1723 	/* Check that the LUN values are consistent */
1724 	if (common->lun != lun)
1725 		DBG(common, "using LUN %u from CBW, not LUN %u from CDB\n",
1726 		    common->lun, lun);
1727 
1728 	/* Check the LUN */
1729 	curlun = common->curlun;
1730 	if (curlun) {
1731 		if (common->cmnd[0] != REQUEST_SENSE) {
1732 			curlun->sense_data = SS_NO_SENSE;
1733 			curlun->sense_data_info = 0;
1734 			curlun->info_valid = 0;
1735 		}
1736 	} else {
1737 		common->bad_lun_okay = 0;
1738 
1739 		/*
1740 		 * INQUIRY and REQUEST SENSE commands are explicitly allowed
1741 		 * to use unsupported LUNs; all others may not.
1742 		 */
1743 		if (common->cmnd[0] != INQUIRY &&
1744 		    common->cmnd[0] != REQUEST_SENSE) {
1745 			DBG(common, "unsupported LUN %u\n", common->lun);
1746 			return -EINVAL;
1747 		}
1748 	}
1749 
1750 	/*
1751 	 * If a unit attention condition exists, only INQUIRY and
1752 	 * REQUEST SENSE commands are allowed; anything else must fail.
1753 	 */
1754 	if (curlun && curlun->unit_attention_data != SS_NO_SENSE &&
1755 	    common->cmnd[0] != INQUIRY &&
1756 	    common->cmnd[0] != REQUEST_SENSE) {
1757 		curlun->sense_data = curlun->unit_attention_data;
1758 		curlun->unit_attention_data = SS_NO_SENSE;
1759 		return -EINVAL;
1760 	}
1761 
1762 	/* Check that only command bytes listed in the mask are non-zero */
1763 	common->cmnd[1] &= 0x1f;			/* Mask away the LUN */
1764 	for (i = 1; i < cmnd_size; ++i) {
1765 		if (common->cmnd[i] && !(mask & (1 << i))) {
1766 			if (curlun)
1767 				curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1768 			return -EINVAL;
1769 		}
1770 	}
1771 
1772 	/* If the medium isn't mounted and the command needs to access
1773 	 * it, return an error. */
1774 	if (curlun && !fsg_lun_is_open(curlun) && needs_medium) {
1775 		curlun->sense_data = SS_MEDIUM_NOT_PRESENT;
1776 		return -EINVAL;
1777 	}
1778 
1779 	return 0;
1780 }
1781 
1782 /* wrapper of check_command for data size in blocks handling */
1783 static int check_command_size_in_blocks(struct fsg_common *common,
1784 		int cmnd_size, enum data_direction data_dir,
1785 		unsigned int mask, int needs_medium, const char *name)
1786 {
1787 	if (common->curlun)
1788 		common->data_size_from_cmnd <<= common->curlun->blkbits;
1789 	return check_command(common, cmnd_size, data_dir,
1790 			mask, needs_medium, name);
1791 }
1792 
1793 static int do_scsi_command(struct fsg_common *common)
1794 {
1795 	struct fsg_buffhd	*bh;
1796 	int			rc;
1797 	int			reply = -EINVAL;
1798 	int			i;
1799 	static char		unknown[16];
1800 
1801 	dump_cdb(common);
1802 
1803 	/* Wait for the next buffer to become available for data or status */
1804 	bh = common->next_buffhd_to_fill;
1805 	common->next_buffhd_to_drain = bh;
1806 	rc = sleep_thread(common, false, bh);
1807 	if (rc)
1808 		return rc;
1809 
1810 	common->phase_error = 0;
1811 	common->short_packet_received = 0;
1812 
1813 	down_read(&common->filesem);	/* We're using the backing file */
1814 	switch (common->cmnd[0]) {
1815 
1816 	case INQUIRY:
1817 		common->data_size_from_cmnd = common->cmnd[4];
1818 		reply = check_command(common, 6, DATA_DIR_TO_HOST,
1819 				      (1<<4), 0,
1820 				      "INQUIRY");
1821 		if (reply == 0)
1822 			reply = do_inquiry(common, bh);
1823 		break;
1824 
1825 	case MODE_SELECT:
1826 		common->data_size_from_cmnd = common->cmnd[4];
1827 		reply = check_command(common, 6, DATA_DIR_FROM_HOST,
1828 				      (1<<1) | (1<<4), 0,
1829 				      "MODE SELECT(6)");
1830 		if (reply == 0)
1831 			reply = do_mode_select(common, bh);
1832 		break;
1833 
1834 	case MODE_SELECT_10:
1835 		common->data_size_from_cmnd =
1836 			get_unaligned_be16(&common->cmnd[7]);
1837 		reply = check_command(common, 10, DATA_DIR_FROM_HOST,
1838 				      (1<<1) | (3<<7), 0,
1839 				      "MODE SELECT(10)");
1840 		if (reply == 0)
1841 			reply = do_mode_select(common, bh);
1842 		break;
1843 
1844 	case MODE_SENSE:
1845 		common->data_size_from_cmnd = common->cmnd[4];
1846 		reply = check_command(common, 6, DATA_DIR_TO_HOST,
1847 				      (1<<1) | (1<<2) | (1<<4), 0,
1848 				      "MODE SENSE(6)");
1849 		if (reply == 0)
1850 			reply = do_mode_sense(common, bh);
1851 		break;
1852 
1853 	case MODE_SENSE_10:
1854 		common->data_size_from_cmnd =
1855 			get_unaligned_be16(&common->cmnd[7]);
1856 		reply = check_command(common, 10, DATA_DIR_TO_HOST,
1857 				      (1<<1) | (1<<2) | (3<<7), 0,
1858 				      "MODE SENSE(10)");
1859 		if (reply == 0)
1860 			reply = do_mode_sense(common, bh);
1861 		break;
1862 
1863 	case ALLOW_MEDIUM_REMOVAL:
1864 		common->data_size_from_cmnd = 0;
1865 		reply = check_command(common, 6, DATA_DIR_NONE,
1866 				      (1<<4), 0,
1867 				      "PREVENT-ALLOW MEDIUM REMOVAL");
1868 		if (reply == 0)
1869 			reply = do_prevent_allow(common);
1870 		break;
1871 
1872 	case READ_6:
1873 		i = common->cmnd[4];
1874 		common->data_size_from_cmnd = (i == 0) ? 256 : i;
1875 		reply = check_command_size_in_blocks(common, 6,
1876 				      DATA_DIR_TO_HOST,
1877 				      (7<<1) | (1<<4), 1,
1878 				      "READ(6)");
1879 		if (reply == 0)
1880 			reply = do_read(common);
1881 		break;
1882 
1883 	case READ_10:
1884 		common->data_size_from_cmnd =
1885 				get_unaligned_be16(&common->cmnd[7]);
1886 		reply = check_command_size_in_blocks(common, 10,
1887 				      DATA_DIR_TO_HOST,
1888 				      (1<<1) | (0xf<<2) | (3<<7), 1,
1889 				      "READ(10)");
1890 		if (reply == 0)
1891 			reply = do_read(common);
1892 		break;
1893 
1894 	case READ_12:
1895 		common->data_size_from_cmnd =
1896 				get_unaligned_be32(&common->cmnd[6]);
1897 		reply = check_command_size_in_blocks(common, 12,
1898 				      DATA_DIR_TO_HOST,
1899 				      (1<<1) | (0xf<<2) | (0xf<<6), 1,
1900 				      "READ(12)");
1901 		if (reply == 0)
1902 			reply = do_read(common);
1903 		break;
1904 
1905 	case READ_CAPACITY:
1906 		common->data_size_from_cmnd = 8;
1907 		reply = check_command(common, 10, DATA_DIR_TO_HOST,
1908 				      (0xf<<2) | (1<<8), 1,
1909 				      "READ CAPACITY");
1910 		if (reply == 0)
1911 			reply = do_read_capacity(common, bh);
1912 		break;
1913 
1914 	case READ_HEADER:
1915 		if (!common->curlun || !common->curlun->cdrom)
1916 			goto unknown_cmnd;
1917 		common->data_size_from_cmnd =
1918 			get_unaligned_be16(&common->cmnd[7]);
1919 		reply = check_command(common, 10, DATA_DIR_TO_HOST,
1920 				      (3<<7) | (0x1f<<1), 1,
1921 				      "READ HEADER");
1922 		if (reply == 0)
1923 			reply = do_read_header(common, bh);
1924 		break;
1925 
1926 	case READ_TOC:
1927 		if (!common->curlun || !common->curlun->cdrom)
1928 			goto unknown_cmnd;
1929 		common->data_size_from_cmnd =
1930 			get_unaligned_be16(&common->cmnd[7]);
1931 		reply = check_command(common, 10, DATA_DIR_TO_HOST,
1932 				      (7<<6) | (1<<1), 1,
1933 				      "READ TOC");
1934 		if (reply == 0)
1935 			reply = do_read_toc(common, bh);
1936 		break;
1937 
1938 	case READ_FORMAT_CAPACITIES:
1939 		common->data_size_from_cmnd =
1940 			get_unaligned_be16(&common->cmnd[7]);
1941 		reply = check_command(common, 10, DATA_DIR_TO_HOST,
1942 				      (3<<7), 1,
1943 				      "READ FORMAT CAPACITIES");
1944 		if (reply == 0)
1945 			reply = do_read_format_capacities(common, bh);
1946 		break;
1947 
1948 	case REQUEST_SENSE:
1949 		common->data_size_from_cmnd = common->cmnd[4];
1950 		reply = check_command(common, 6, DATA_DIR_TO_HOST,
1951 				      (1<<4), 0,
1952 				      "REQUEST SENSE");
1953 		if (reply == 0)
1954 			reply = do_request_sense(common, bh);
1955 		break;
1956 
1957 	case START_STOP:
1958 		common->data_size_from_cmnd = 0;
1959 		reply = check_command(common, 6, DATA_DIR_NONE,
1960 				      (1<<1) | (1<<4), 0,
1961 				      "START-STOP UNIT");
1962 		if (reply == 0)
1963 			reply = do_start_stop(common);
1964 		break;
1965 
1966 	case SYNCHRONIZE_CACHE:
1967 		common->data_size_from_cmnd = 0;
1968 		reply = check_command(common, 10, DATA_DIR_NONE,
1969 				      (0xf<<2) | (3<<7), 1,
1970 				      "SYNCHRONIZE CACHE");
1971 		if (reply == 0)
1972 			reply = do_synchronize_cache(common);
1973 		break;
1974 
1975 	case TEST_UNIT_READY:
1976 		common->data_size_from_cmnd = 0;
1977 		reply = check_command(common, 6, DATA_DIR_NONE,
1978 				0, 1,
1979 				"TEST UNIT READY");
1980 		break;
1981 
1982 	/*
1983 	 * Although optional, this command is used by MS-Windows.  We
1984 	 * support a minimal version: BytChk must be 0.
1985 	 */
1986 	case VERIFY:
1987 		common->data_size_from_cmnd = 0;
1988 		reply = check_command(common, 10, DATA_DIR_NONE,
1989 				      (1<<1) | (0xf<<2) | (3<<7), 1,
1990 				      "VERIFY");
1991 		if (reply == 0)
1992 			reply = do_verify(common);
1993 		break;
1994 
1995 	case WRITE_6:
1996 		i = common->cmnd[4];
1997 		common->data_size_from_cmnd = (i == 0) ? 256 : i;
1998 		reply = check_command_size_in_blocks(common, 6,
1999 				      DATA_DIR_FROM_HOST,
2000 				      (7<<1) | (1<<4), 1,
2001 				      "WRITE(6)");
2002 		if (reply == 0)
2003 			reply = do_write(common);
2004 		break;
2005 
2006 	case WRITE_10:
2007 		common->data_size_from_cmnd =
2008 				get_unaligned_be16(&common->cmnd[7]);
2009 		reply = check_command_size_in_blocks(common, 10,
2010 				      DATA_DIR_FROM_HOST,
2011 				      (1<<1) | (0xf<<2) | (3<<7), 1,
2012 				      "WRITE(10)");
2013 		if (reply == 0)
2014 			reply = do_write(common);
2015 		break;
2016 
2017 	case WRITE_12:
2018 		common->data_size_from_cmnd =
2019 				get_unaligned_be32(&common->cmnd[6]);
2020 		reply = check_command_size_in_blocks(common, 12,
2021 				      DATA_DIR_FROM_HOST,
2022 				      (1<<1) | (0xf<<2) | (0xf<<6), 1,
2023 				      "WRITE(12)");
2024 		if (reply == 0)
2025 			reply = do_write(common);
2026 		break;
2027 
2028 	/*
2029 	 * Some mandatory commands that we recognize but don't implement.
2030 	 * They don't mean much in this setting.  It's left as an exercise
2031 	 * for anyone interested to implement RESERVE and RELEASE in terms
2032 	 * of Posix locks.
2033 	 */
2034 	case FORMAT_UNIT:
2035 	case RELEASE:
2036 	case RESERVE:
2037 	case SEND_DIAGNOSTIC:
2038 		/* Fall through */
2039 
2040 	default:
2041 unknown_cmnd:
2042 		common->data_size_from_cmnd = 0;
2043 		sprintf(unknown, "Unknown x%02x", common->cmnd[0]);
2044 		reply = check_command(common, common->cmnd_size,
2045 				      DATA_DIR_UNKNOWN, ~0, 0, unknown);
2046 		if (reply == 0) {
2047 			common->curlun->sense_data = SS_INVALID_COMMAND;
2048 			reply = -EINVAL;
2049 		}
2050 		break;
2051 	}
2052 	up_read(&common->filesem);
2053 
2054 	if (reply == -EINTR || signal_pending(current))
2055 		return -EINTR;
2056 
2057 	/* Set up the single reply buffer for finish_reply() */
2058 	if (reply == -EINVAL)
2059 		reply = 0;		/* Error reply length */
2060 	if (reply >= 0 && common->data_dir == DATA_DIR_TO_HOST) {
2061 		reply = min((u32)reply, common->data_size_from_cmnd);
2062 		bh->inreq->length = reply;
2063 		bh->state = BUF_STATE_FULL;
2064 		common->residue -= reply;
2065 	}				/* Otherwise it's already set */
2066 
2067 	return 0;
2068 }
2069 
2070 
2071 /*-------------------------------------------------------------------------*/
2072 
2073 static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
2074 {
2075 	struct usb_request	*req = bh->outreq;
2076 	struct bulk_cb_wrap	*cbw = req->buf;
2077 	struct fsg_common	*common = fsg->common;
2078 
2079 	/* Was this a real packet?  Should it be ignored? */
2080 	if (req->status || test_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags))
2081 		return -EINVAL;
2082 
2083 	/* Is the CBW valid? */
2084 	if (req->actual != US_BULK_CB_WRAP_LEN ||
2085 			cbw->Signature != cpu_to_le32(
2086 				US_BULK_CB_SIGN)) {
2087 		DBG(fsg, "invalid CBW: len %u sig 0x%x\n",
2088 				req->actual,
2089 				le32_to_cpu(cbw->Signature));
2090 
2091 		/*
2092 		 * The Bulk-only spec says we MUST stall the IN endpoint
2093 		 * (6.6.1), so it's unavoidable.  It also says we must
2094 		 * retain this state until the next reset, but there's
2095 		 * no way to tell the controller driver it should ignore
2096 		 * Clear-Feature(HALT) requests.
2097 		 *
2098 		 * We aren't required to halt the OUT endpoint; instead
2099 		 * we can simply accept and discard any data received
2100 		 * until the next reset.
2101 		 */
2102 		wedge_bulk_in_endpoint(fsg);
2103 		set_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
2104 		return -EINVAL;
2105 	}
2106 
2107 	/* Is the CBW meaningful? */
2108 	if (cbw->Lun >= ARRAY_SIZE(common->luns) ||
2109 	    cbw->Flags & ~US_BULK_FLAG_IN || cbw->Length <= 0 ||
2110 	    cbw->Length > MAX_COMMAND_SIZE) {
2111 		DBG(fsg, "non-meaningful CBW: lun = %u, flags = 0x%x, "
2112 				"cmdlen %u\n",
2113 				cbw->Lun, cbw->Flags, cbw->Length);
2114 
2115 		/*
2116 		 * We can do anything we want here, so let's stall the
2117 		 * bulk pipes if we are allowed to.
2118 		 */
2119 		if (common->can_stall) {
2120 			fsg_set_halt(fsg, fsg->bulk_out);
2121 			halt_bulk_in_endpoint(fsg);
2122 		}
2123 		return -EINVAL;
2124 	}
2125 
2126 	/* Save the command for later */
2127 	common->cmnd_size = cbw->Length;
2128 	memcpy(common->cmnd, cbw->CDB, common->cmnd_size);
2129 	if (cbw->Flags & US_BULK_FLAG_IN)
2130 		common->data_dir = DATA_DIR_TO_HOST;
2131 	else
2132 		common->data_dir = DATA_DIR_FROM_HOST;
2133 	common->data_size = le32_to_cpu(cbw->DataTransferLength);
2134 	if (common->data_size == 0)
2135 		common->data_dir = DATA_DIR_NONE;
2136 	common->lun = cbw->Lun;
2137 	if (common->lun < ARRAY_SIZE(common->luns))
2138 		common->curlun = common->luns[common->lun];
2139 	else
2140 		common->curlun = NULL;
2141 	common->tag = cbw->Tag;
2142 	return 0;
2143 }
2144 
2145 static int get_next_command(struct fsg_common *common)
2146 {
2147 	struct fsg_buffhd	*bh;
2148 	int			rc = 0;
2149 
2150 	/* Wait for the next buffer to become available */
2151 	bh = common->next_buffhd_to_fill;
2152 	rc = sleep_thread(common, true, bh);
2153 	if (rc)
2154 		return rc;
2155 
2156 	/* Queue a request to read a Bulk-only CBW */
2157 	set_bulk_out_req_length(common, bh, US_BULK_CB_WRAP_LEN);
2158 	if (!start_out_transfer(common, bh))
2159 		/* Don't know what to do if common->fsg is NULL */
2160 		return -EIO;
2161 
2162 	/*
2163 	 * We will drain the buffer in software, which means we
2164 	 * can reuse it for the next filling.  No need to advance
2165 	 * next_buffhd_to_fill.
2166 	 */
2167 
2168 	/* Wait for the CBW to arrive */
2169 	rc = sleep_thread(common, true, bh);
2170 	if (rc)
2171 		return rc;
2172 
2173 	rc = fsg_is_set(common) ? received_cbw(common->fsg, bh) : -EIO;
2174 	bh->state = BUF_STATE_EMPTY;
2175 
2176 	return rc;
2177 }
2178 
2179 
2180 /*-------------------------------------------------------------------------*/
2181 
2182 static int alloc_request(struct fsg_common *common, struct usb_ep *ep,
2183 		struct usb_request **preq)
2184 {
2185 	*preq = usb_ep_alloc_request(ep, GFP_ATOMIC);
2186 	if (*preq)
2187 		return 0;
2188 	ERROR(common, "can't allocate request for %s\n", ep->name);
2189 	return -ENOMEM;
2190 }
2191 
2192 /* Reset interface setting and re-init endpoint state (toggle etc). */
2193 static int do_set_interface(struct fsg_common *common, struct fsg_dev *new_fsg)
2194 {
2195 	struct fsg_dev *fsg;
2196 	int i, rc = 0;
2197 
2198 	if (common->running)
2199 		DBG(common, "reset interface\n");
2200 
2201 reset:
2202 	/* Deallocate the requests */
2203 	if (common->fsg) {
2204 		fsg = common->fsg;
2205 
2206 		for (i = 0; i < common->fsg_num_buffers; ++i) {
2207 			struct fsg_buffhd *bh = &common->buffhds[i];
2208 
2209 			if (bh->inreq) {
2210 				usb_ep_free_request(fsg->bulk_in, bh->inreq);
2211 				bh->inreq = NULL;
2212 			}
2213 			if (bh->outreq) {
2214 				usb_ep_free_request(fsg->bulk_out, bh->outreq);
2215 				bh->outreq = NULL;
2216 			}
2217 		}
2218 
2219 		/* Disable the endpoints */
2220 		if (fsg->bulk_in_enabled) {
2221 			usb_ep_disable(fsg->bulk_in);
2222 			fsg->bulk_in_enabled = 0;
2223 		}
2224 		if (fsg->bulk_out_enabled) {
2225 			usb_ep_disable(fsg->bulk_out);
2226 			fsg->bulk_out_enabled = 0;
2227 		}
2228 
2229 		common->fsg = NULL;
2230 		wake_up(&common->fsg_wait);
2231 	}
2232 
2233 	common->running = 0;
2234 	if (!new_fsg || rc)
2235 		return rc;
2236 
2237 	common->fsg = new_fsg;
2238 	fsg = common->fsg;
2239 
2240 	/* Enable the endpoints */
2241 	rc = config_ep_by_speed(common->gadget, &(fsg->function), fsg->bulk_in);
2242 	if (rc)
2243 		goto reset;
2244 	rc = usb_ep_enable(fsg->bulk_in);
2245 	if (rc)
2246 		goto reset;
2247 	fsg->bulk_in->driver_data = common;
2248 	fsg->bulk_in_enabled = 1;
2249 
2250 	rc = config_ep_by_speed(common->gadget, &(fsg->function),
2251 				fsg->bulk_out);
2252 	if (rc)
2253 		goto reset;
2254 	rc = usb_ep_enable(fsg->bulk_out);
2255 	if (rc)
2256 		goto reset;
2257 	fsg->bulk_out->driver_data = common;
2258 	fsg->bulk_out_enabled = 1;
2259 	common->bulk_out_maxpacket = usb_endpoint_maxp(fsg->bulk_out->desc);
2260 	clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
2261 
2262 	/* Allocate the requests */
2263 	for (i = 0; i < common->fsg_num_buffers; ++i) {
2264 		struct fsg_buffhd	*bh = &common->buffhds[i];
2265 
2266 		rc = alloc_request(common, fsg->bulk_in, &bh->inreq);
2267 		if (rc)
2268 			goto reset;
2269 		rc = alloc_request(common, fsg->bulk_out, &bh->outreq);
2270 		if (rc)
2271 			goto reset;
2272 		bh->inreq->buf = bh->outreq->buf = bh->buf;
2273 		bh->inreq->context = bh->outreq->context = bh;
2274 		bh->inreq->complete = bulk_in_complete;
2275 		bh->outreq->complete = bulk_out_complete;
2276 	}
2277 
2278 	common->running = 1;
2279 	for (i = 0; i < ARRAY_SIZE(common->luns); ++i)
2280 		if (common->luns[i])
2281 			common->luns[i]->unit_attention_data =
2282 				SS_RESET_OCCURRED;
2283 	return rc;
2284 }
2285 
2286 
2287 /****************************** ALT CONFIGS ******************************/
2288 
2289 static int fsg_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
2290 {
2291 	struct fsg_dev *fsg = fsg_from_func(f);
2292 	fsg->common->new_fsg = fsg;
2293 	raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
2294 	return USB_GADGET_DELAYED_STATUS;
2295 }
2296 
2297 static void fsg_disable(struct usb_function *f)
2298 {
2299 	struct fsg_dev *fsg = fsg_from_func(f);
2300 	fsg->common->new_fsg = NULL;
2301 	raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
2302 }
2303 
2304 
2305 /*-------------------------------------------------------------------------*/
2306 
2307 static void handle_exception(struct fsg_common *common)
2308 {
2309 	int			i;
2310 	struct fsg_buffhd	*bh;
2311 	enum fsg_state		old_state;
2312 	struct fsg_lun		*curlun;
2313 	unsigned int		exception_req_tag;
2314 
2315 	/*
2316 	 * Clear the existing signals.  Anything but SIGUSR1 is converted
2317 	 * into a high-priority EXIT exception.
2318 	 */
2319 	for (;;) {
2320 		int sig = kernel_dequeue_signal(NULL);
2321 		if (!sig)
2322 			break;
2323 		if (sig != SIGUSR1) {
2324 			spin_lock_irq(&common->lock);
2325 			if (common->state < FSG_STATE_EXIT)
2326 				DBG(common, "Main thread exiting on signal\n");
2327 			common->state = FSG_STATE_EXIT;
2328 			spin_unlock_irq(&common->lock);
2329 		}
2330 	}
2331 
2332 	/* Cancel all the pending transfers */
2333 	if (likely(common->fsg)) {
2334 		for (i = 0; i < common->fsg_num_buffers; ++i) {
2335 			bh = &common->buffhds[i];
2336 			if (bh->state == BUF_STATE_SENDING)
2337 				usb_ep_dequeue(common->fsg->bulk_in, bh->inreq);
2338 			if (bh->state == BUF_STATE_RECEIVING)
2339 				usb_ep_dequeue(common->fsg->bulk_out,
2340 					       bh->outreq);
2341 
2342 			/* Wait for a transfer to become idle */
2343 			if (sleep_thread(common, false, bh))
2344 				return;
2345 		}
2346 
2347 		/* Clear out the controller's fifos */
2348 		if (common->fsg->bulk_in_enabled)
2349 			usb_ep_fifo_flush(common->fsg->bulk_in);
2350 		if (common->fsg->bulk_out_enabled)
2351 			usb_ep_fifo_flush(common->fsg->bulk_out);
2352 	}
2353 
2354 	/*
2355 	 * Reset the I/O buffer states and pointers, the SCSI
2356 	 * state, and the exception.  Then invoke the handler.
2357 	 */
2358 	spin_lock_irq(&common->lock);
2359 
2360 	for (i = 0; i < common->fsg_num_buffers; ++i) {
2361 		bh = &common->buffhds[i];
2362 		bh->state = BUF_STATE_EMPTY;
2363 	}
2364 	common->next_buffhd_to_fill = &common->buffhds[0];
2365 	common->next_buffhd_to_drain = &common->buffhds[0];
2366 	exception_req_tag = common->exception_req_tag;
2367 	old_state = common->state;
2368 	common->state = FSG_STATE_NORMAL;
2369 
2370 	if (old_state != FSG_STATE_ABORT_BULK_OUT) {
2371 		for (i = 0; i < ARRAY_SIZE(common->luns); ++i) {
2372 			curlun = common->luns[i];
2373 			if (!curlun)
2374 				continue;
2375 			curlun->prevent_medium_removal = 0;
2376 			curlun->sense_data = SS_NO_SENSE;
2377 			curlun->unit_attention_data = SS_NO_SENSE;
2378 			curlun->sense_data_info = 0;
2379 			curlun->info_valid = 0;
2380 		}
2381 	}
2382 	spin_unlock_irq(&common->lock);
2383 
2384 	/* Carry out any extra actions required for the exception */
2385 	switch (old_state) {
2386 	case FSG_STATE_NORMAL:
2387 		break;
2388 
2389 	case FSG_STATE_ABORT_BULK_OUT:
2390 		send_status(common);
2391 		break;
2392 
2393 	case FSG_STATE_PROTOCOL_RESET:
2394 		/*
2395 		 * In case we were forced against our will to halt a
2396 		 * bulk endpoint, clear the halt now.  (The SuperH UDC
2397 		 * requires this.)
2398 		 */
2399 		if (!fsg_is_set(common))
2400 			break;
2401 		if (test_and_clear_bit(IGNORE_BULK_OUT,
2402 				       &common->fsg->atomic_bitflags))
2403 			usb_ep_clear_halt(common->fsg->bulk_in);
2404 
2405 		if (common->ep0_req_tag == exception_req_tag)
2406 			ep0_queue(common);	/* Complete the status stage */
2407 
2408 		/*
2409 		 * Technically this should go here, but it would only be
2410 		 * a waste of time.  Ditto for the INTERFACE_CHANGE and
2411 		 * CONFIG_CHANGE cases.
2412 		 */
2413 		/* for (i = 0; i < common->ARRAY_SIZE(common->luns); ++i) */
2414 		/*	if (common->luns[i]) */
2415 		/*		common->luns[i]->unit_attention_data = */
2416 		/*			SS_RESET_OCCURRED;  */
2417 		break;
2418 
2419 	case FSG_STATE_CONFIG_CHANGE:
2420 		do_set_interface(common, common->new_fsg);
2421 		if (common->new_fsg)
2422 			usb_composite_setup_continue(common->cdev);
2423 		break;
2424 
2425 	case FSG_STATE_EXIT:
2426 		do_set_interface(common, NULL);		/* Free resources */
2427 		spin_lock_irq(&common->lock);
2428 		common->state = FSG_STATE_TERMINATED;	/* Stop the thread */
2429 		spin_unlock_irq(&common->lock);
2430 		break;
2431 
2432 	case FSG_STATE_TERMINATED:
2433 		break;
2434 	}
2435 }
2436 
2437 
2438 /*-------------------------------------------------------------------------*/
2439 
2440 static int fsg_main_thread(void *common_)
2441 {
2442 	struct fsg_common	*common = common_;
2443 
2444 	/*
2445 	 * Allow the thread to be killed by a signal, but set the signal mask
2446 	 * to block everything but INT, TERM, KILL, and USR1.
2447 	 */
2448 	allow_signal(SIGINT);
2449 	allow_signal(SIGTERM);
2450 	allow_signal(SIGKILL);
2451 	allow_signal(SIGUSR1);
2452 
2453 	/* Allow the thread to be frozen */
2454 	set_freezable();
2455 
2456 	/*
2457 	 * Arrange for userspace references to be interpreted as kernel
2458 	 * pointers.  That way we can pass a kernel pointer to a routine
2459 	 * that expects a __user pointer and it will work okay.
2460 	 */
2461 	set_fs(get_ds());
2462 
2463 	/* The main loop */
2464 	while (common->state != FSG_STATE_TERMINATED) {
2465 		if (exception_in_progress(common) || signal_pending(current)) {
2466 			handle_exception(common);
2467 			continue;
2468 		}
2469 
2470 		if (!common->running) {
2471 			sleep_thread(common, true, NULL);
2472 			continue;
2473 		}
2474 
2475 		if (get_next_command(common) || exception_in_progress(common))
2476 			continue;
2477 		if (do_scsi_command(common) || exception_in_progress(common))
2478 			continue;
2479 		if (finish_reply(common) || exception_in_progress(common))
2480 			continue;
2481 		send_status(common);
2482 	}
2483 
2484 	spin_lock_irq(&common->lock);
2485 	common->thread_task = NULL;
2486 	spin_unlock_irq(&common->lock);
2487 
2488 	if (!common->ops || !common->ops->thread_exits
2489 	 || common->ops->thread_exits(common) < 0) {
2490 		int i;
2491 
2492 		down_write(&common->filesem);
2493 		for (i = 0; i < ARRAY_SIZE(common->luns); i++) {
2494 			struct fsg_lun *curlun = common->luns[i];
2495 			if (!curlun || !fsg_lun_is_open(curlun))
2496 				continue;
2497 
2498 			fsg_lun_close(curlun);
2499 			curlun->unit_attention_data = SS_MEDIUM_NOT_PRESENT;
2500 		}
2501 		up_write(&common->filesem);
2502 	}
2503 
2504 	/* Let fsg_unbind() know the thread has exited */
2505 	complete_and_exit(&common->thread_notifier, 0);
2506 }
2507 
2508 
2509 /*************************** DEVICE ATTRIBUTES ***************************/
2510 
2511 static ssize_t ro_show(struct device *dev, struct device_attribute *attr, char *buf)
2512 {
2513 	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
2514 
2515 	return fsg_show_ro(curlun, buf);
2516 }
2517 
2518 static ssize_t nofua_show(struct device *dev, struct device_attribute *attr,
2519 			  char *buf)
2520 {
2521 	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
2522 
2523 	return fsg_show_nofua(curlun, buf);
2524 }
2525 
2526 static ssize_t file_show(struct device *dev, struct device_attribute *attr,
2527 			 char *buf)
2528 {
2529 	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
2530 	struct rw_semaphore	*filesem = dev_get_drvdata(dev);
2531 
2532 	return fsg_show_file(curlun, filesem, buf);
2533 }
2534 
2535 static ssize_t ro_store(struct device *dev, struct device_attribute *attr,
2536 			const char *buf, size_t count)
2537 {
2538 	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
2539 	struct rw_semaphore	*filesem = dev_get_drvdata(dev);
2540 
2541 	return fsg_store_ro(curlun, filesem, buf, count);
2542 }
2543 
2544 static ssize_t nofua_store(struct device *dev, struct device_attribute *attr,
2545 			   const char *buf, size_t count)
2546 {
2547 	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
2548 
2549 	return fsg_store_nofua(curlun, buf, count);
2550 }
2551 
2552 static ssize_t file_store(struct device *dev, struct device_attribute *attr,
2553 			  const char *buf, size_t count)
2554 {
2555 	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
2556 	struct rw_semaphore	*filesem = dev_get_drvdata(dev);
2557 
2558 	return fsg_store_file(curlun, filesem, buf, count);
2559 }
2560 
2561 static DEVICE_ATTR_RW(nofua);
2562 /* mode wil be set in fsg_lun_attr_is_visible() */
2563 static DEVICE_ATTR(ro, 0, ro_show, ro_store);
2564 static DEVICE_ATTR(file, 0, file_show, file_store);
2565 
2566 /****************************** FSG COMMON ******************************/
2567 
2568 static void fsg_common_release(struct kref *ref);
2569 
2570 static void fsg_lun_release(struct device *dev)
2571 {
2572 	/* Nothing needs to be done */
2573 }
2574 
2575 void fsg_common_get(struct fsg_common *common)
2576 {
2577 	kref_get(&common->ref);
2578 }
2579 EXPORT_SYMBOL_GPL(fsg_common_get);
2580 
2581 void fsg_common_put(struct fsg_common *common)
2582 {
2583 	kref_put(&common->ref, fsg_common_release);
2584 }
2585 EXPORT_SYMBOL_GPL(fsg_common_put);
2586 
2587 static struct fsg_common *fsg_common_setup(struct fsg_common *common)
2588 {
2589 	if (!common) {
2590 		common = kzalloc(sizeof(*common), GFP_KERNEL);
2591 		if (!common)
2592 			return ERR_PTR(-ENOMEM);
2593 		common->free_storage_on_release = 1;
2594 	} else {
2595 		common->free_storage_on_release = 0;
2596 	}
2597 	init_rwsem(&common->filesem);
2598 	spin_lock_init(&common->lock);
2599 	kref_init(&common->ref);
2600 	init_completion(&common->thread_notifier);
2601 	init_waitqueue_head(&common->io_wait);
2602 	init_waitqueue_head(&common->fsg_wait);
2603 	common->state = FSG_STATE_TERMINATED;
2604 	memset(common->luns, 0, sizeof(common->luns));
2605 
2606 	return common;
2607 }
2608 
2609 void fsg_common_set_sysfs(struct fsg_common *common, bool sysfs)
2610 {
2611 	common->sysfs = sysfs;
2612 }
2613 EXPORT_SYMBOL_GPL(fsg_common_set_sysfs);
2614 
2615 static void _fsg_common_free_buffers(struct fsg_buffhd *buffhds, unsigned n)
2616 {
2617 	if (buffhds) {
2618 		struct fsg_buffhd *bh = buffhds;
2619 		while (n--) {
2620 			kfree(bh->buf);
2621 			++bh;
2622 		}
2623 		kfree(buffhds);
2624 	}
2625 }
2626 
2627 int fsg_common_set_num_buffers(struct fsg_common *common, unsigned int n)
2628 {
2629 	struct fsg_buffhd *bh, *buffhds;
2630 	int i;
2631 
2632 	buffhds = kcalloc(n, sizeof(*buffhds), GFP_KERNEL);
2633 	if (!buffhds)
2634 		return -ENOMEM;
2635 
2636 	/* Data buffers cyclic list */
2637 	bh = buffhds;
2638 	i = n;
2639 	goto buffhds_first_it;
2640 	do {
2641 		bh->next = bh + 1;
2642 		++bh;
2643 buffhds_first_it:
2644 		bh->buf = kmalloc(FSG_BUFLEN, GFP_KERNEL);
2645 		if (unlikely(!bh->buf))
2646 			goto error_release;
2647 	} while (--i);
2648 	bh->next = buffhds;
2649 
2650 	_fsg_common_free_buffers(common->buffhds, common->fsg_num_buffers);
2651 	common->fsg_num_buffers = n;
2652 	common->buffhds = buffhds;
2653 
2654 	return 0;
2655 
2656 error_release:
2657 	/*
2658 	 * "buf"s pointed to by heads after n - i are NULL
2659 	 * so releasing them won't hurt
2660 	 */
2661 	_fsg_common_free_buffers(buffhds, n);
2662 
2663 	return -ENOMEM;
2664 }
2665 EXPORT_SYMBOL_GPL(fsg_common_set_num_buffers);
2666 
2667 void fsg_common_remove_lun(struct fsg_lun *lun)
2668 {
2669 	if (device_is_registered(&lun->dev))
2670 		device_unregister(&lun->dev);
2671 	fsg_lun_close(lun);
2672 	kfree(lun);
2673 }
2674 EXPORT_SYMBOL_GPL(fsg_common_remove_lun);
2675 
2676 static void _fsg_common_remove_luns(struct fsg_common *common, int n)
2677 {
2678 	int i;
2679 
2680 	for (i = 0; i < n; ++i)
2681 		if (common->luns[i]) {
2682 			fsg_common_remove_lun(common->luns[i]);
2683 			common->luns[i] = NULL;
2684 		}
2685 }
2686 
2687 void fsg_common_remove_luns(struct fsg_common *common)
2688 {
2689 	_fsg_common_remove_luns(common, ARRAY_SIZE(common->luns));
2690 }
2691 EXPORT_SYMBOL_GPL(fsg_common_remove_luns);
2692 
2693 void fsg_common_set_ops(struct fsg_common *common,
2694 			const struct fsg_operations *ops)
2695 {
2696 	common->ops = ops;
2697 }
2698 EXPORT_SYMBOL_GPL(fsg_common_set_ops);
2699 
2700 void fsg_common_free_buffers(struct fsg_common *common)
2701 {
2702 	_fsg_common_free_buffers(common->buffhds, common->fsg_num_buffers);
2703 	common->buffhds = NULL;
2704 }
2705 EXPORT_SYMBOL_GPL(fsg_common_free_buffers);
2706 
2707 int fsg_common_set_cdev(struct fsg_common *common,
2708 			 struct usb_composite_dev *cdev, bool can_stall)
2709 {
2710 	struct usb_string *us;
2711 
2712 	common->gadget = cdev->gadget;
2713 	common->ep0 = cdev->gadget->ep0;
2714 	common->ep0req = cdev->req;
2715 	common->cdev = cdev;
2716 
2717 	us = usb_gstrings_attach(cdev, fsg_strings_array,
2718 				 ARRAY_SIZE(fsg_strings));
2719 	if (IS_ERR(us))
2720 		return PTR_ERR(us);
2721 
2722 	fsg_intf_desc.iInterface = us[FSG_STRING_INTERFACE].id;
2723 
2724 	/*
2725 	 * Some peripheral controllers are known not to be able to
2726 	 * halt bulk endpoints correctly.  If one of them is present,
2727 	 * disable stalls.
2728 	 */
2729 	common->can_stall = can_stall &&
2730 			gadget_is_stall_supported(common->gadget);
2731 
2732 	return 0;
2733 }
2734 EXPORT_SYMBOL_GPL(fsg_common_set_cdev);
2735 
2736 static struct attribute *fsg_lun_dev_attrs[] = {
2737 	&dev_attr_ro.attr,
2738 	&dev_attr_file.attr,
2739 	&dev_attr_nofua.attr,
2740 	NULL
2741 };
2742 
2743 static umode_t fsg_lun_dev_is_visible(struct kobject *kobj,
2744 				      struct attribute *attr, int idx)
2745 {
2746 	struct device *dev = kobj_to_dev(kobj);
2747 	struct fsg_lun *lun = fsg_lun_from_dev(dev);
2748 
2749 	if (attr == &dev_attr_ro.attr)
2750 		return lun->cdrom ? S_IRUGO : (S_IWUSR | S_IRUGO);
2751 	if (attr == &dev_attr_file.attr)
2752 		return lun->removable ? (S_IWUSR | S_IRUGO) : S_IRUGO;
2753 	return attr->mode;
2754 }
2755 
2756 static const struct attribute_group fsg_lun_dev_group = {
2757 	.attrs = fsg_lun_dev_attrs,
2758 	.is_visible = fsg_lun_dev_is_visible,
2759 };
2760 
2761 static const struct attribute_group *fsg_lun_dev_groups[] = {
2762 	&fsg_lun_dev_group,
2763 	NULL
2764 };
2765 
2766 int fsg_common_create_lun(struct fsg_common *common, struct fsg_lun_config *cfg,
2767 			  unsigned int id, const char *name,
2768 			  const char **name_pfx)
2769 {
2770 	struct fsg_lun *lun;
2771 	char *pathbuf, *p;
2772 	int rc = -ENOMEM;
2773 
2774 	if (id >= ARRAY_SIZE(common->luns))
2775 		return -ENODEV;
2776 
2777 	if (common->luns[id])
2778 		return -EBUSY;
2779 
2780 	if (!cfg->filename && !cfg->removable) {
2781 		pr_err("no file given for LUN%d\n", id);
2782 		return -EINVAL;
2783 	}
2784 
2785 	lun = kzalloc(sizeof(*lun), GFP_KERNEL);
2786 	if (!lun)
2787 		return -ENOMEM;
2788 
2789 	lun->name_pfx = name_pfx;
2790 
2791 	lun->cdrom = !!cfg->cdrom;
2792 	lun->ro = cfg->cdrom || cfg->ro;
2793 	lun->initially_ro = lun->ro;
2794 	lun->removable = !!cfg->removable;
2795 
2796 	if (!common->sysfs) {
2797 		/* we DON'T own the name!*/
2798 		lun->name = name;
2799 	} else {
2800 		lun->dev.release = fsg_lun_release;
2801 		lun->dev.parent = &common->gadget->dev;
2802 		lun->dev.groups = fsg_lun_dev_groups;
2803 		dev_set_drvdata(&lun->dev, &common->filesem);
2804 		dev_set_name(&lun->dev, "%s", name);
2805 		lun->name = dev_name(&lun->dev);
2806 
2807 		rc = device_register(&lun->dev);
2808 		if (rc) {
2809 			pr_info("failed to register LUN%d: %d\n", id, rc);
2810 			put_device(&lun->dev);
2811 			goto error_sysfs;
2812 		}
2813 	}
2814 
2815 	common->luns[id] = lun;
2816 
2817 	if (cfg->filename) {
2818 		rc = fsg_lun_open(lun, cfg->filename);
2819 		if (rc)
2820 			goto error_lun;
2821 	}
2822 
2823 	pathbuf = kmalloc(PATH_MAX, GFP_KERNEL);
2824 	p = "(no medium)";
2825 	if (fsg_lun_is_open(lun)) {
2826 		p = "(error)";
2827 		if (pathbuf) {
2828 			p = file_path(lun->filp, pathbuf, PATH_MAX);
2829 			if (IS_ERR(p))
2830 				p = "(error)";
2831 		}
2832 	}
2833 	pr_info("LUN: %s%s%sfile: %s\n",
2834 	      lun->removable ? "removable " : "",
2835 	      lun->ro ? "read only " : "",
2836 	      lun->cdrom ? "CD-ROM " : "",
2837 	      p);
2838 	kfree(pathbuf);
2839 
2840 	return 0;
2841 
2842 error_lun:
2843 	if (device_is_registered(&lun->dev))
2844 		device_unregister(&lun->dev);
2845 	fsg_lun_close(lun);
2846 	common->luns[id] = NULL;
2847 error_sysfs:
2848 	kfree(lun);
2849 	return rc;
2850 }
2851 EXPORT_SYMBOL_GPL(fsg_common_create_lun);
2852 
2853 int fsg_common_create_luns(struct fsg_common *common, struct fsg_config *cfg)
2854 {
2855 	char buf[8]; /* enough for 100000000 different numbers, decimal */
2856 	int i, rc;
2857 
2858 	fsg_common_remove_luns(common);
2859 
2860 	for (i = 0; i < cfg->nluns; ++i) {
2861 		snprintf(buf, sizeof(buf), "lun%d", i);
2862 		rc = fsg_common_create_lun(common, &cfg->luns[i], i, buf, NULL);
2863 		if (rc)
2864 			goto fail;
2865 	}
2866 
2867 	pr_info("Number of LUNs=%d\n", cfg->nluns);
2868 
2869 	return 0;
2870 
2871 fail:
2872 	_fsg_common_remove_luns(common, i);
2873 	return rc;
2874 }
2875 EXPORT_SYMBOL_GPL(fsg_common_create_luns);
2876 
2877 void fsg_common_set_inquiry_string(struct fsg_common *common, const char *vn,
2878 				   const char *pn)
2879 {
2880 	int i;
2881 
2882 	/* Prepare inquiryString */
2883 	i = get_default_bcdDevice();
2884 	snprintf(common->inquiry_string, sizeof(common->inquiry_string),
2885 		 "%-8s%-16s%04x", vn ?: "Linux",
2886 		 /* Assume product name dependent on the first LUN */
2887 		 pn ?: ((*common->luns)->cdrom
2888 		     ? "File-CD Gadget"
2889 		     : "File-Stor Gadget"),
2890 		 i);
2891 }
2892 EXPORT_SYMBOL_GPL(fsg_common_set_inquiry_string);
2893 
2894 static void fsg_common_release(struct kref *ref)
2895 {
2896 	struct fsg_common *common = container_of(ref, struct fsg_common, ref);
2897 	int i;
2898 
2899 	/* If the thread isn't already dead, tell it to exit now */
2900 	if (common->state != FSG_STATE_TERMINATED) {
2901 		raise_exception(common, FSG_STATE_EXIT);
2902 		wait_for_completion(&common->thread_notifier);
2903 	}
2904 
2905 	for (i = 0; i < ARRAY_SIZE(common->luns); ++i) {
2906 		struct fsg_lun *lun = common->luns[i];
2907 		if (!lun)
2908 			continue;
2909 		fsg_lun_close(lun);
2910 		if (device_is_registered(&lun->dev))
2911 			device_unregister(&lun->dev);
2912 		kfree(lun);
2913 	}
2914 
2915 	_fsg_common_free_buffers(common->buffhds, common->fsg_num_buffers);
2916 	if (common->free_storage_on_release)
2917 		kfree(common);
2918 }
2919 
2920 
2921 /*-------------------------------------------------------------------------*/
2922 
2923 static int fsg_bind(struct usb_configuration *c, struct usb_function *f)
2924 {
2925 	struct fsg_dev		*fsg = fsg_from_func(f);
2926 	struct fsg_common	*common = fsg->common;
2927 	struct usb_gadget	*gadget = c->cdev->gadget;
2928 	int			i;
2929 	struct usb_ep		*ep;
2930 	unsigned		max_burst;
2931 	int			ret;
2932 	struct fsg_opts		*opts;
2933 
2934 	/* Don't allow to bind if we don't have at least one LUN */
2935 	ret = _fsg_common_get_max_lun(common);
2936 	if (ret < 0) {
2937 		pr_err("There should be at least one LUN.\n");
2938 		return -EINVAL;
2939 	}
2940 
2941 	opts = fsg_opts_from_func_inst(f->fi);
2942 	if (!opts->no_configfs) {
2943 		ret = fsg_common_set_cdev(fsg->common, c->cdev,
2944 					  fsg->common->can_stall);
2945 		if (ret)
2946 			return ret;
2947 		fsg_common_set_inquiry_string(fsg->common, NULL, NULL);
2948 	}
2949 
2950 	if (!common->thread_task) {
2951 		common->state = FSG_STATE_NORMAL;
2952 		common->thread_task =
2953 			kthread_create(fsg_main_thread, common, "file-storage");
2954 		if (IS_ERR(common->thread_task)) {
2955 			ret = PTR_ERR(common->thread_task);
2956 			common->thread_task = NULL;
2957 			common->state = FSG_STATE_TERMINATED;
2958 			return ret;
2959 		}
2960 		DBG(common, "I/O thread pid: %d\n",
2961 		    task_pid_nr(common->thread_task));
2962 		wake_up_process(common->thread_task);
2963 	}
2964 
2965 	fsg->gadget = gadget;
2966 
2967 	/* New interface */
2968 	i = usb_interface_id(c, f);
2969 	if (i < 0)
2970 		goto fail;
2971 	fsg_intf_desc.bInterfaceNumber = i;
2972 	fsg->interface_number = i;
2973 
2974 	/* Find all the endpoints we will use */
2975 	ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_in_desc);
2976 	if (!ep)
2977 		goto autoconf_fail;
2978 	fsg->bulk_in = ep;
2979 
2980 	ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_out_desc);
2981 	if (!ep)
2982 		goto autoconf_fail;
2983 	fsg->bulk_out = ep;
2984 
2985 	/* Assume endpoint addresses are the same for both speeds */
2986 	fsg_hs_bulk_in_desc.bEndpointAddress =
2987 		fsg_fs_bulk_in_desc.bEndpointAddress;
2988 	fsg_hs_bulk_out_desc.bEndpointAddress =
2989 		fsg_fs_bulk_out_desc.bEndpointAddress;
2990 
2991 	/* Calculate bMaxBurst, we know packet size is 1024 */
2992 	max_burst = min_t(unsigned, FSG_BUFLEN / 1024, 15);
2993 
2994 	fsg_ss_bulk_in_desc.bEndpointAddress =
2995 		fsg_fs_bulk_in_desc.bEndpointAddress;
2996 	fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst;
2997 
2998 	fsg_ss_bulk_out_desc.bEndpointAddress =
2999 		fsg_fs_bulk_out_desc.bEndpointAddress;
3000 	fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst;
3001 
3002 	ret = usb_assign_descriptors(f, fsg_fs_function, fsg_hs_function,
3003 			fsg_ss_function, fsg_ss_function);
3004 	if (ret)
3005 		goto autoconf_fail;
3006 
3007 	return 0;
3008 
3009 autoconf_fail:
3010 	ERROR(fsg, "unable to autoconfigure all endpoints\n");
3011 	i = -ENOTSUPP;
3012 fail:
3013 	/* terminate the thread */
3014 	if (fsg->common->state != FSG_STATE_TERMINATED) {
3015 		raise_exception(fsg->common, FSG_STATE_EXIT);
3016 		wait_for_completion(&fsg->common->thread_notifier);
3017 	}
3018 	return i;
3019 }
3020 
3021 /****************************** ALLOCATE FUNCTION *************************/
3022 
3023 static void fsg_unbind(struct usb_configuration *c, struct usb_function *f)
3024 {
3025 	struct fsg_dev		*fsg = fsg_from_func(f);
3026 	struct fsg_common	*common = fsg->common;
3027 
3028 	DBG(fsg, "unbind\n");
3029 	if (fsg->common->fsg == fsg) {
3030 		fsg->common->new_fsg = NULL;
3031 		raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
3032 		/* FIXME: make interruptible or killable somehow? */
3033 		wait_event(common->fsg_wait, common->fsg != fsg);
3034 	}
3035 
3036 	usb_free_all_descriptors(&fsg->function);
3037 }
3038 
3039 static inline struct fsg_lun_opts *to_fsg_lun_opts(struct config_item *item)
3040 {
3041 	return container_of(to_config_group(item), struct fsg_lun_opts, group);
3042 }
3043 
3044 static inline struct fsg_opts *to_fsg_opts(struct config_item *item)
3045 {
3046 	return container_of(to_config_group(item), struct fsg_opts,
3047 			    func_inst.group);
3048 }
3049 
3050 static void fsg_lun_attr_release(struct config_item *item)
3051 {
3052 	struct fsg_lun_opts *lun_opts;
3053 
3054 	lun_opts = to_fsg_lun_opts(item);
3055 	kfree(lun_opts);
3056 }
3057 
3058 static struct configfs_item_operations fsg_lun_item_ops = {
3059 	.release		= fsg_lun_attr_release,
3060 };
3061 
3062 static ssize_t fsg_lun_opts_file_show(struct config_item *item, char *page)
3063 {
3064 	struct fsg_lun_opts *opts = to_fsg_lun_opts(item);
3065 	struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent);
3066 
3067 	return fsg_show_file(opts->lun, &fsg_opts->common->filesem, page);
3068 }
3069 
3070 static ssize_t fsg_lun_opts_file_store(struct config_item *item,
3071 				       const char *page, size_t len)
3072 {
3073 	struct fsg_lun_opts *opts = to_fsg_lun_opts(item);
3074 	struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent);
3075 
3076 	return fsg_store_file(opts->lun, &fsg_opts->common->filesem, page, len);
3077 }
3078 
3079 CONFIGFS_ATTR(fsg_lun_opts_, file);
3080 
3081 static ssize_t fsg_lun_opts_ro_show(struct config_item *item, char *page)
3082 {
3083 	return fsg_show_ro(to_fsg_lun_opts(item)->lun, page);
3084 }
3085 
3086 static ssize_t fsg_lun_opts_ro_store(struct config_item *item,
3087 				       const char *page, size_t len)
3088 {
3089 	struct fsg_lun_opts *opts = to_fsg_lun_opts(item);
3090 	struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent);
3091 
3092 	return fsg_store_ro(opts->lun, &fsg_opts->common->filesem, page, len);
3093 }
3094 
3095 CONFIGFS_ATTR(fsg_lun_opts_, ro);
3096 
3097 static ssize_t fsg_lun_opts_removable_show(struct config_item *item,
3098 					   char *page)
3099 {
3100 	return fsg_show_removable(to_fsg_lun_opts(item)->lun, page);
3101 }
3102 
3103 static ssize_t fsg_lun_opts_removable_store(struct config_item *item,
3104 				       const char *page, size_t len)
3105 {
3106 	return fsg_store_removable(to_fsg_lun_opts(item)->lun, page, len);
3107 }
3108 
3109 CONFIGFS_ATTR(fsg_lun_opts_, removable);
3110 
3111 static ssize_t fsg_lun_opts_cdrom_show(struct config_item *item, char *page)
3112 {
3113 	return fsg_show_cdrom(to_fsg_lun_opts(item)->lun, page);
3114 }
3115 
3116 static ssize_t fsg_lun_opts_cdrom_store(struct config_item *item,
3117 				       const char *page, size_t len)
3118 {
3119 	struct fsg_lun_opts *opts = to_fsg_lun_opts(item);
3120 	struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent);
3121 
3122 	return fsg_store_cdrom(opts->lun, &fsg_opts->common->filesem, page,
3123 			       len);
3124 }
3125 
3126 CONFIGFS_ATTR(fsg_lun_opts_, cdrom);
3127 
3128 static ssize_t fsg_lun_opts_nofua_show(struct config_item *item, char *page)
3129 {
3130 	return fsg_show_nofua(to_fsg_lun_opts(item)->lun, page);
3131 }
3132 
3133 static ssize_t fsg_lun_opts_nofua_store(struct config_item *item,
3134 				       const char *page, size_t len)
3135 {
3136 	return fsg_store_nofua(to_fsg_lun_opts(item)->lun, page, len);
3137 }
3138 
3139 CONFIGFS_ATTR(fsg_lun_opts_, nofua);
3140 
3141 static ssize_t fsg_lun_opts_inquiry_string_show(struct config_item *item,
3142 						char *page)
3143 {
3144 	return fsg_show_inquiry_string(to_fsg_lun_opts(item)->lun, page);
3145 }
3146 
3147 static ssize_t fsg_lun_opts_inquiry_string_store(struct config_item *item,
3148 						 const char *page, size_t len)
3149 {
3150 	return fsg_store_inquiry_string(to_fsg_lun_opts(item)->lun, page, len);
3151 }
3152 
3153 CONFIGFS_ATTR(fsg_lun_opts_, inquiry_string);
3154 
3155 static struct configfs_attribute *fsg_lun_attrs[] = {
3156 	&fsg_lun_opts_attr_file,
3157 	&fsg_lun_opts_attr_ro,
3158 	&fsg_lun_opts_attr_removable,
3159 	&fsg_lun_opts_attr_cdrom,
3160 	&fsg_lun_opts_attr_nofua,
3161 	&fsg_lun_opts_attr_inquiry_string,
3162 	NULL,
3163 };
3164 
3165 static struct config_item_type fsg_lun_type = {
3166 	.ct_item_ops	= &fsg_lun_item_ops,
3167 	.ct_attrs	= fsg_lun_attrs,
3168 	.ct_owner	= THIS_MODULE,
3169 };
3170 
3171 static struct config_group *fsg_lun_make(struct config_group *group,
3172 					 const char *name)
3173 {
3174 	struct fsg_lun_opts *opts;
3175 	struct fsg_opts *fsg_opts;
3176 	struct fsg_lun_config config;
3177 	char *num_str;
3178 	u8 num;
3179 	int ret;
3180 
3181 	num_str = strchr(name, '.');
3182 	if (!num_str) {
3183 		pr_err("Unable to locate . in LUN.NUMBER\n");
3184 		return ERR_PTR(-EINVAL);
3185 	}
3186 	num_str++;
3187 
3188 	ret = kstrtou8(num_str, 0, &num);
3189 	if (ret)
3190 		return ERR_PTR(ret);
3191 
3192 	fsg_opts = to_fsg_opts(&group->cg_item);
3193 	if (num >= FSG_MAX_LUNS)
3194 		return ERR_PTR(-ERANGE);
3195 
3196 	mutex_lock(&fsg_opts->lock);
3197 	if (fsg_opts->refcnt || fsg_opts->common->luns[num]) {
3198 		ret = -EBUSY;
3199 		goto out;
3200 	}
3201 
3202 	opts = kzalloc(sizeof(*opts), GFP_KERNEL);
3203 	if (!opts) {
3204 		ret = -ENOMEM;
3205 		goto out;
3206 	}
3207 
3208 	memset(&config, 0, sizeof(config));
3209 	config.removable = true;
3210 
3211 	ret = fsg_common_create_lun(fsg_opts->common, &config, num, name,
3212 				    (const char **)&group->cg_item.ci_name);
3213 	if (ret) {
3214 		kfree(opts);
3215 		goto out;
3216 	}
3217 	opts->lun = fsg_opts->common->luns[num];
3218 	opts->lun_id = num;
3219 	mutex_unlock(&fsg_opts->lock);
3220 
3221 	config_group_init_type_name(&opts->group, name, &fsg_lun_type);
3222 
3223 	return &opts->group;
3224 out:
3225 	mutex_unlock(&fsg_opts->lock);
3226 	return ERR_PTR(ret);
3227 }
3228 
3229 static void fsg_lun_drop(struct config_group *group, struct config_item *item)
3230 {
3231 	struct fsg_lun_opts *lun_opts;
3232 	struct fsg_opts *fsg_opts;
3233 
3234 	lun_opts = to_fsg_lun_opts(item);
3235 	fsg_opts = to_fsg_opts(&group->cg_item);
3236 
3237 	mutex_lock(&fsg_opts->lock);
3238 	if (fsg_opts->refcnt) {
3239 		struct config_item *gadget;
3240 
3241 		gadget = group->cg_item.ci_parent->ci_parent;
3242 		unregister_gadget_item(gadget);
3243 	}
3244 
3245 	fsg_common_remove_lun(lun_opts->lun);
3246 	fsg_opts->common->luns[lun_opts->lun_id] = NULL;
3247 	lun_opts->lun_id = 0;
3248 	mutex_unlock(&fsg_opts->lock);
3249 
3250 	config_item_put(item);
3251 }
3252 
3253 static void fsg_attr_release(struct config_item *item)
3254 {
3255 	struct fsg_opts *opts = to_fsg_opts(item);
3256 
3257 	usb_put_function_instance(&opts->func_inst);
3258 }
3259 
3260 static struct configfs_item_operations fsg_item_ops = {
3261 	.release		= fsg_attr_release,
3262 };
3263 
3264 static ssize_t fsg_opts_stall_show(struct config_item *item, char *page)
3265 {
3266 	struct fsg_opts *opts = to_fsg_opts(item);
3267 	int result;
3268 
3269 	mutex_lock(&opts->lock);
3270 	result = sprintf(page, "%d", opts->common->can_stall);
3271 	mutex_unlock(&opts->lock);
3272 
3273 	return result;
3274 }
3275 
3276 static ssize_t fsg_opts_stall_store(struct config_item *item, const char *page,
3277 				    size_t len)
3278 {
3279 	struct fsg_opts *opts = to_fsg_opts(item);
3280 	int ret;
3281 	bool stall;
3282 
3283 	mutex_lock(&opts->lock);
3284 
3285 	if (opts->refcnt) {
3286 		mutex_unlock(&opts->lock);
3287 		return -EBUSY;
3288 	}
3289 
3290 	ret = strtobool(page, &stall);
3291 	if (!ret) {
3292 		opts->common->can_stall = stall;
3293 		ret = len;
3294 	}
3295 
3296 	mutex_unlock(&opts->lock);
3297 
3298 	return ret;
3299 }
3300 
3301 CONFIGFS_ATTR(fsg_opts_, stall);
3302 
3303 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
3304 static ssize_t fsg_opts_num_buffers_show(struct config_item *item, char *page)
3305 {
3306 	struct fsg_opts *opts = to_fsg_opts(item);
3307 	int result;
3308 
3309 	mutex_lock(&opts->lock);
3310 	result = sprintf(page, "%d", opts->common->fsg_num_buffers);
3311 	mutex_unlock(&opts->lock);
3312 
3313 	return result;
3314 }
3315 
3316 static ssize_t fsg_opts_num_buffers_store(struct config_item *item,
3317 					  const char *page, size_t len)
3318 {
3319 	struct fsg_opts *opts = to_fsg_opts(item);
3320 	int ret;
3321 	u8 num;
3322 
3323 	mutex_lock(&opts->lock);
3324 	if (opts->refcnt) {
3325 		ret = -EBUSY;
3326 		goto end;
3327 	}
3328 	ret = kstrtou8(page, 0, &num);
3329 	if (ret)
3330 		goto end;
3331 
3332 	fsg_common_set_num_buffers(opts->common, num);
3333 	ret = len;
3334 
3335 end:
3336 	mutex_unlock(&opts->lock);
3337 	return ret;
3338 }
3339 
3340 CONFIGFS_ATTR(fsg_opts_, num_buffers);
3341 #endif
3342 
3343 static struct configfs_attribute *fsg_attrs[] = {
3344 	&fsg_opts_attr_stall,
3345 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
3346 	&fsg_opts_attr_num_buffers,
3347 #endif
3348 	NULL,
3349 };
3350 
3351 static struct configfs_group_operations fsg_group_ops = {
3352 	.make_group	= fsg_lun_make,
3353 	.drop_item	= fsg_lun_drop,
3354 };
3355 
3356 static struct config_item_type fsg_func_type = {
3357 	.ct_item_ops	= &fsg_item_ops,
3358 	.ct_group_ops	= &fsg_group_ops,
3359 	.ct_attrs	= fsg_attrs,
3360 	.ct_owner	= THIS_MODULE,
3361 };
3362 
3363 static void fsg_free_inst(struct usb_function_instance *fi)
3364 {
3365 	struct fsg_opts *opts;
3366 
3367 	opts = fsg_opts_from_func_inst(fi);
3368 	fsg_common_put(opts->common);
3369 	kfree(opts);
3370 }
3371 
3372 static struct usb_function_instance *fsg_alloc_inst(void)
3373 {
3374 	struct fsg_opts *opts;
3375 	struct fsg_lun_config config;
3376 	int rc;
3377 
3378 	opts = kzalloc(sizeof(*opts), GFP_KERNEL);
3379 	if (!opts)
3380 		return ERR_PTR(-ENOMEM);
3381 	mutex_init(&opts->lock);
3382 	opts->func_inst.free_func_inst = fsg_free_inst;
3383 	opts->common = fsg_common_setup(opts->common);
3384 	if (IS_ERR(opts->common)) {
3385 		rc = PTR_ERR(opts->common);
3386 		goto release_opts;
3387 	}
3388 
3389 	rc = fsg_common_set_num_buffers(opts->common,
3390 					CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS);
3391 	if (rc)
3392 		goto release_opts;
3393 
3394 	pr_info(FSG_DRIVER_DESC ", version: " FSG_DRIVER_VERSION "\n");
3395 
3396 	memset(&config, 0, sizeof(config));
3397 	config.removable = true;
3398 	rc = fsg_common_create_lun(opts->common, &config, 0, "lun.0",
3399 			(const char **)&opts->func_inst.group.cg_item.ci_name);
3400 	if (rc)
3401 		goto release_buffers;
3402 
3403 	opts->lun0.lun = opts->common->luns[0];
3404 	opts->lun0.lun_id = 0;
3405 
3406 	config_group_init_type_name(&opts->func_inst.group, "", &fsg_func_type);
3407 
3408 	config_group_init_type_name(&opts->lun0.group, "lun.0", &fsg_lun_type);
3409 	configfs_add_default_group(&opts->lun0.group, &opts->func_inst.group);
3410 
3411 	return &opts->func_inst;
3412 
3413 release_buffers:
3414 	fsg_common_free_buffers(opts->common);
3415 release_opts:
3416 	kfree(opts);
3417 	return ERR_PTR(rc);
3418 }
3419 
3420 static void fsg_free(struct usb_function *f)
3421 {
3422 	struct fsg_dev *fsg;
3423 	struct fsg_opts *opts;
3424 
3425 	fsg = container_of(f, struct fsg_dev, function);
3426 	opts = container_of(f->fi, struct fsg_opts, func_inst);
3427 
3428 	mutex_lock(&opts->lock);
3429 	opts->refcnt--;
3430 	mutex_unlock(&opts->lock);
3431 
3432 	kfree(fsg);
3433 }
3434 
3435 static struct usb_function *fsg_alloc(struct usb_function_instance *fi)
3436 {
3437 	struct fsg_opts *opts = fsg_opts_from_func_inst(fi);
3438 	struct fsg_common *common = opts->common;
3439 	struct fsg_dev *fsg;
3440 
3441 	fsg = kzalloc(sizeof(*fsg), GFP_KERNEL);
3442 	if (unlikely(!fsg))
3443 		return ERR_PTR(-ENOMEM);
3444 
3445 	mutex_lock(&opts->lock);
3446 	opts->refcnt++;
3447 	mutex_unlock(&opts->lock);
3448 
3449 	fsg->function.name	= FSG_DRIVER_DESC;
3450 	fsg->function.bind	= fsg_bind;
3451 	fsg->function.unbind	= fsg_unbind;
3452 	fsg->function.setup	= fsg_setup;
3453 	fsg->function.set_alt	= fsg_set_alt;
3454 	fsg->function.disable	= fsg_disable;
3455 	fsg->function.free_func	= fsg_free;
3456 
3457 	fsg->common               = common;
3458 
3459 	return &fsg->function;
3460 }
3461 
3462 DECLARE_USB_FUNCTION_INIT(mass_storage, fsg_alloc_inst, fsg_alloc);
3463 MODULE_LICENSE("GPL");
3464 MODULE_AUTHOR("Michal Nazarewicz");
3465 
3466 /************************* Module parameters *************************/
3467 
3468 
3469 void fsg_config_from_params(struct fsg_config *cfg,
3470 		       const struct fsg_module_parameters *params,
3471 		       unsigned int fsg_num_buffers)
3472 {
3473 	struct fsg_lun_config *lun;
3474 	unsigned i;
3475 
3476 	/* Configure LUNs */
3477 	cfg->nluns =
3478 		min(params->luns ?: (params->file_count ?: 1u),
3479 		    (unsigned)FSG_MAX_LUNS);
3480 	for (i = 0, lun = cfg->luns; i < cfg->nluns; ++i, ++lun) {
3481 		lun->ro = !!params->ro[i];
3482 		lun->cdrom = !!params->cdrom[i];
3483 		lun->removable = !!params->removable[i];
3484 		lun->filename =
3485 			params->file_count > i && params->file[i][0]
3486 			? params->file[i]
3487 			: NULL;
3488 	}
3489 
3490 	/* Let MSF use defaults */
3491 	cfg->vendor_name = NULL;
3492 	cfg->product_name = NULL;
3493 
3494 	cfg->ops = NULL;
3495 	cfg->private_data = NULL;
3496 
3497 	/* Finalise */
3498 	cfg->can_stall = params->stall;
3499 	cfg->fsg_num_buffers = fsg_num_buffers;
3500 }
3501 EXPORT_SYMBOL_GPL(fsg_config_from_params);
3502