1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
2 /*
3  * f_mass_storage.c -- Mass Storage USB Composite Function
4  *
5  * Copyright (C) 2003-2008 Alan Stern
6  * Copyright (C) 2009 Samsung Electronics
7  *                    Author: Michal Nazarewicz <mina86@mina86.com>
8  * All rights reserved.
9  *
10  * Redistribution and use in source and binary forms, with or without
11  * modification, are permitted provided that the following conditions
12  * are met:
13  * 1. Redistributions of source code must retain the above copyright
14  *    notice, this list of conditions, and the following disclaimer,
15  *    without modification.
16  * 2. Redistributions in binary form must reproduce the above copyright
17  *    notice, this list of conditions and the following disclaimer in the
18  *    documentation and/or other materials provided with the distribution.
19  * 3. The names of the above-listed copyright holders may not be used
20  *    to endorse or promote products derived from this software without
21  *    specific prior written permission.
22  *
23  * ALTERNATIVELY, this software may be distributed under the terms of the
24  * GNU General Public License ("GPL") as published by the Free Software
25  * Foundation, either version 2 of that License or (at your option) any
26  * later version.
27  *
28  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
29  * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
30  * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
31  * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
32  * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
33  * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
34  * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
35  * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
36  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
37  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
38  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
39  */
40 
41 /*
42  * The Mass Storage Function acts as a USB Mass Storage device,
43  * appearing to the host as a disk drive or as a CD-ROM drive.  In
44  * addition to providing an example of a genuinely useful composite
45  * function for a USB device, it also illustrates a technique of
46  * double-buffering for increased throughput.
47  *
48  * For more information about MSF and in particular its module
49  * parameters and sysfs interface read the
50  * <Documentation/usb/mass-storage.rst> file.
51  */
52 
53 /*
54  * MSF is configured by specifying a fsg_config structure.  It has the
55  * following fields:
56  *
57  *	nluns		Number of LUNs function have (anywhere from 1
58  *				to FSG_MAX_LUNS).
59  *	luns		An array of LUN configuration values.  This
60  *				should be filled for each LUN that
61  *				function will include (ie. for "nluns"
62  *				LUNs).  Each element of the array has
63  *				the following fields:
64  *	->filename	The path to the backing file for the LUN.
65  *				Required if LUN is not marked as
66  *				removable.
67  *	->ro		Flag specifying access to the LUN shall be
68  *				read-only.  This is implied if CD-ROM
69  *				emulation is enabled as well as when
70  *				it was impossible to open "filename"
71  *				in R/W mode.
72  *	->removable	Flag specifying that LUN shall be indicated as
73  *				being removable.
74  *	->cdrom		Flag specifying that LUN shall be reported as
75  *				being a CD-ROM.
76  *	->nofua		Flag specifying that FUA flag in SCSI WRITE(10,12)
77  *				commands for this LUN shall be ignored.
78  *
79  *	vendor_name
80  *	product_name
81  *	release		Information used as a reply to INQUIRY
82  *				request.  To use default set to NULL,
83  *				NULL, 0xffff respectively.  The first
84  *				field should be 8 and the second 16
85  *				characters or less.
86  *
87  *	can_stall	Set to permit function to halt bulk endpoints.
88  *				Disabled on some USB devices known not
89  *				to work correctly.  You should set it
90  *				to true.
91  *
92  * If "removable" is not set for a LUN then a backing file must be
93  * specified.  If it is set, then NULL filename means the LUN's medium
94  * is not loaded (an empty string as "filename" in the fsg_config
95  * structure causes error).  The CD-ROM emulation includes a single
96  * data track and no audio tracks; hence there need be only one
97  * backing file per LUN.
98  *
99  * This function is heavily based on "File-backed Storage Gadget" by
100  * Alan Stern which in turn is heavily based on "Gadget Zero" by David
101  * Brownell.  The driver's SCSI command interface was based on the
102  * "Information technology - Small Computer System Interface - 2"
103  * document from X3T9.2 Project 375D, Revision 10L, 7-SEP-93,
104  * available at <http://www.t10.org/ftp/t10/drafts/s2/s2-r10l.pdf>.
105  * The single exception is opcode 0x23 (READ FORMAT CAPACITIES), which
106  * was based on the "Universal Serial Bus Mass Storage Class UFI
107  * Command Specification" document, Revision 1.0, December 14, 1998,
108  * available at
109  * <http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf>.
110  */
111 
112 /*
113  *				Driver Design
114  *
115  * The MSF is fairly straightforward.  There is a main kernel
116  * thread that handles most of the work.  Interrupt routines field
117  * callbacks from the controller driver: bulk- and interrupt-request
118  * completion notifications, endpoint-0 events, and disconnect events.
119  * Completion events are passed to the main thread by wakeup calls.  Many
120  * ep0 requests are handled at interrupt time, but SetInterface,
121  * SetConfiguration, and device reset requests are forwarded to the
122  * thread in the form of "exceptions" using SIGUSR1 signals (since they
123  * should interrupt any ongoing file I/O operations).
124  *
125  * The thread's main routine implements the standard command/data/status
126  * parts of a SCSI interaction.  It and its subroutines are full of tests
127  * for pending signals/exceptions -- all this polling is necessary since
128  * the kernel has no setjmp/longjmp equivalents.  (Maybe this is an
129  * indication that the driver really wants to be running in userspace.)
130  * An important point is that so long as the thread is alive it keeps an
131  * open reference to the backing file.  This will prevent unmounting
132  * the backing file's underlying filesystem and could cause problems
133  * during system shutdown, for example.  To prevent such problems, the
134  * thread catches INT, TERM, and KILL signals and converts them into
135  * an EXIT exception.
136  *
137  * In normal operation the main thread is started during the gadget's
138  * fsg_bind() callback and stopped during fsg_unbind().  But it can
139  * also exit when it receives a signal, and there's no point leaving
140  * the gadget running when the thread is dead.  As of this moment, MSF
141  * provides no way to deregister the gadget when thread dies -- maybe
142  * a callback functions is needed.
143  *
144  * To provide maximum throughput, the driver uses a circular pipeline of
145  * buffer heads (struct fsg_buffhd).  In principle the pipeline can be
146  * arbitrarily long; in practice the benefits don't justify having more
147  * than 2 stages (i.e., double buffering).  But it helps to think of the
148  * pipeline as being a long one.  Each buffer head contains a bulk-in and
149  * a bulk-out request pointer (since the buffer can be used for both
150  * output and input -- directions always are given from the host's
151  * point of view) as well as a pointer to the buffer and various state
152  * variables.
153  *
154  * Use of the pipeline follows a simple protocol.  There is a variable
155  * (fsg->next_buffhd_to_fill) that points to the next buffer head to use.
156  * At any time that buffer head may still be in use from an earlier
157  * request, so each buffer head has a state variable indicating whether
158  * it is EMPTY, FULL, or BUSY.  Typical use involves waiting for the
159  * buffer head to be EMPTY, filling the buffer either by file I/O or by
160  * USB I/O (during which the buffer head is BUSY), and marking the buffer
161  * head FULL when the I/O is complete.  Then the buffer will be emptied
162  * (again possibly by USB I/O, during which it is marked BUSY) and
163  * finally marked EMPTY again (possibly by a completion routine).
164  *
165  * A module parameter tells the driver to avoid stalling the bulk
166  * endpoints wherever the transport specification allows.  This is
167  * necessary for some UDCs like the SuperH, which cannot reliably clear a
168  * halt on a bulk endpoint.  However, under certain circumstances the
169  * Bulk-only specification requires a stall.  In such cases the driver
170  * will halt the endpoint and set a flag indicating that it should clear
171  * the halt in software during the next device reset.  Hopefully this
172  * will permit everything to work correctly.  Furthermore, although the
173  * specification allows the bulk-out endpoint to halt when the host sends
174  * too much data, implementing this would cause an unavoidable race.
175  * The driver will always use the "no-stall" approach for OUT transfers.
176  *
177  * One subtle point concerns sending status-stage responses for ep0
178  * requests.  Some of these requests, such as device reset, can involve
179  * interrupting an ongoing file I/O operation, which might take an
180  * arbitrarily long time.  During that delay the host might give up on
181  * the original ep0 request and issue a new one.  When that happens the
182  * driver should not notify the host about completion of the original
183  * request, as the host will no longer be waiting for it.  So the driver
184  * assigns to each ep0 request a unique tag, and it keeps track of the
185  * tag value of the request associated with a long-running exception
186  * (device-reset, interface-change, or configuration-change).  When the
187  * exception handler is finished, the status-stage response is submitted
188  * only if the current ep0 request tag is equal to the exception request
189  * tag.  Thus only the most recently received ep0 request will get a
190  * status-stage response.
191  *
192  * Warning: This driver source file is too long.  It ought to be split up
193  * into a header file plus about 3 separate .c files, to handle the details
194  * of the Gadget, USB Mass Storage, and SCSI protocols.
195  */
196 
197 
198 /* #define VERBOSE_DEBUG */
199 /* #define DUMP_MSGS */
200 
201 #include <linux/blkdev.h>
202 #include <linux/completion.h>
203 #include <linux/dcache.h>
204 #include <linux/delay.h>
205 #include <linux/device.h>
206 #include <linux/fcntl.h>
207 #include <linux/file.h>
208 #include <linux/fs.h>
209 #include <linux/kthread.h>
210 #include <linux/sched/signal.h>
211 #include <linux/limits.h>
212 #include <linux/rwsem.h>
213 #include <linux/slab.h>
214 #include <linux/spinlock.h>
215 #include <linux/string.h>
216 #include <linux/freezer.h>
217 #include <linux/module.h>
218 #include <linux/uaccess.h>
219 
220 #include <linux/usb/ch9.h>
221 #include <linux/usb/gadget.h>
222 #include <linux/usb/composite.h>
223 
224 #include <linux/nospec.h>
225 
226 #include "configfs.h"
227 
228 
229 /*------------------------------------------------------------------------*/
230 
231 #define FSG_DRIVER_DESC		"Mass Storage Function"
232 #define FSG_DRIVER_VERSION	"2009/09/11"
233 
234 static const char fsg_string_interface[] = "Mass Storage";
235 
236 #include "storage_common.h"
237 #include "f_mass_storage.h"
238 
239 /* Static strings, in UTF-8 (for simplicity we use only ASCII characters) */
240 static struct usb_string		fsg_strings[] = {
241 	{FSG_STRING_INTERFACE,		fsg_string_interface},
242 	{}
243 };
244 
245 static struct usb_gadget_strings	fsg_stringtab = {
246 	.language	= 0x0409,		/* en-us */
247 	.strings	= fsg_strings,
248 };
249 
250 static struct usb_gadget_strings *fsg_strings_array[] = {
251 	&fsg_stringtab,
252 	NULL,
253 };
254 
255 /*-------------------------------------------------------------------------*/
256 
257 struct fsg_dev;
258 struct fsg_common;
259 
260 /* Data shared by all the FSG instances. */
261 struct fsg_common {
262 	struct usb_gadget	*gadget;
263 	struct usb_composite_dev *cdev;
264 	struct fsg_dev		*fsg;
265 	wait_queue_head_t	io_wait;
266 	wait_queue_head_t	fsg_wait;
267 
268 	/* filesem protects: backing files in use */
269 	struct rw_semaphore	filesem;
270 
271 	/* lock protects: state and thread_task */
272 	spinlock_t		lock;
273 
274 	struct usb_ep		*ep0;		/* Copy of gadget->ep0 */
275 	struct usb_request	*ep0req;	/* Copy of cdev->req */
276 	unsigned int		ep0_req_tag;
277 
278 	struct fsg_buffhd	*next_buffhd_to_fill;
279 	struct fsg_buffhd	*next_buffhd_to_drain;
280 	struct fsg_buffhd	*buffhds;
281 	unsigned int		fsg_num_buffers;
282 
283 	int			cmnd_size;
284 	u8			cmnd[MAX_COMMAND_SIZE];
285 
286 	unsigned int		lun;
287 	struct fsg_lun		*luns[FSG_MAX_LUNS];
288 	struct fsg_lun		*curlun;
289 
290 	unsigned int		bulk_out_maxpacket;
291 	enum fsg_state		state;		/* For exception handling */
292 	unsigned int		exception_req_tag;
293 	void			*exception_arg;
294 
295 	enum data_direction	data_dir;
296 	u32			data_size;
297 	u32			data_size_from_cmnd;
298 	u32			tag;
299 	u32			residue;
300 	u32			usb_amount_left;
301 
302 	unsigned int		can_stall:1;
303 	unsigned int		free_storage_on_release:1;
304 	unsigned int		phase_error:1;
305 	unsigned int		short_packet_received:1;
306 	unsigned int		bad_lun_okay:1;
307 	unsigned int		running:1;
308 	unsigned int		sysfs:1;
309 
310 	struct completion	thread_notifier;
311 	struct task_struct	*thread_task;
312 
313 	/* Gadget's private data. */
314 	void			*private_data;
315 
316 	char inquiry_string[INQUIRY_STRING_LEN];
317 };
318 
319 struct fsg_dev {
320 	struct usb_function	function;
321 	struct usb_gadget	*gadget;	/* Copy of cdev->gadget */
322 	struct fsg_common	*common;
323 
324 	u16			interface_number;
325 
326 	unsigned int		bulk_in_enabled:1;
327 	unsigned int		bulk_out_enabled:1;
328 
329 	unsigned long		atomic_bitflags;
330 #define IGNORE_BULK_OUT		0
331 
332 	struct usb_ep		*bulk_in;
333 	struct usb_ep		*bulk_out;
334 };
335 
336 static inline int __fsg_is_set(struct fsg_common *common,
337 			       const char *func, unsigned line)
338 {
339 	if (common->fsg)
340 		return 1;
341 	ERROR(common, "common->fsg is NULL in %s at %u\n", func, line);
342 	WARN_ON(1);
343 	return 0;
344 }
345 
346 #define fsg_is_set(common) likely(__fsg_is_set(common, __func__, __LINE__))
347 
348 static inline struct fsg_dev *fsg_from_func(struct usb_function *f)
349 {
350 	return container_of(f, struct fsg_dev, function);
351 }
352 
353 typedef void (*fsg_routine_t)(struct fsg_dev *);
354 
355 static int exception_in_progress(struct fsg_common *common)
356 {
357 	return common->state > FSG_STATE_NORMAL;
358 }
359 
360 /* Make bulk-out requests be divisible by the maxpacket size */
361 static void set_bulk_out_req_length(struct fsg_common *common,
362 				    struct fsg_buffhd *bh, unsigned int length)
363 {
364 	unsigned int	rem;
365 
366 	bh->bulk_out_intended_length = length;
367 	rem = length % common->bulk_out_maxpacket;
368 	if (rem > 0)
369 		length += common->bulk_out_maxpacket - rem;
370 	bh->outreq->length = length;
371 }
372 
373 
374 /*-------------------------------------------------------------------------*/
375 
376 static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep)
377 {
378 	const char	*name;
379 
380 	if (ep == fsg->bulk_in)
381 		name = "bulk-in";
382 	else if (ep == fsg->bulk_out)
383 		name = "bulk-out";
384 	else
385 		name = ep->name;
386 	DBG(fsg, "%s set halt\n", name);
387 	return usb_ep_set_halt(ep);
388 }
389 
390 
391 /*-------------------------------------------------------------------------*/
392 
393 /* These routines may be called in process context or in_irq */
394 
395 static void __raise_exception(struct fsg_common *common, enum fsg_state new_state,
396 			      void *arg)
397 {
398 	unsigned long		flags;
399 
400 	/*
401 	 * Do nothing if a higher-priority exception is already in progress.
402 	 * If a lower-or-equal priority exception is in progress, preempt it
403 	 * and notify the main thread by sending it a signal.
404 	 */
405 	spin_lock_irqsave(&common->lock, flags);
406 	if (common->state <= new_state) {
407 		common->exception_req_tag = common->ep0_req_tag;
408 		common->state = new_state;
409 		common->exception_arg = arg;
410 		if (common->thread_task)
411 			send_sig_info(SIGUSR1, SEND_SIG_PRIV,
412 				      common->thread_task);
413 	}
414 	spin_unlock_irqrestore(&common->lock, flags);
415 }
416 
417 static void raise_exception(struct fsg_common *common, enum fsg_state new_state)
418 {
419 	__raise_exception(common, new_state, NULL);
420 }
421 
422 /*-------------------------------------------------------------------------*/
423 
424 static int ep0_queue(struct fsg_common *common)
425 {
426 	int	rc;
427 
428 	rc = usb_ep_queue(common->ep0, common->ep0req, GFP_ATOMIC);
429 	common->ep0->driver_data = common;
430 	if (rc != 0 && rc != -ESHUTDOWN) {
431 		/* We can't do much more than wait for a reset */
432 		WARNING(common, "error in submission: %s --> %d\n",
433 			common->ep0->name, rc);
434 	}
435 	return rc;
436 }
437 
438 
439 /*-------------------------------------------------------------------------*/
440 
441 /* Completion handlers. These always run in_irq. */
442 
443 static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req)
444 {
445 	struct fsg_common	*common = ep->driver_data;
446 	struct fsg_buffhd	*bh = req->context;
447 
448 	if (req->status || req->actual != req->length)
449 		DBG(common, "%s --> %d, %u/%u\n", __func__,
450 		    req->status, req->actual, req->length);
451 	if (req->status == -ECONNRESET)		/* Request was cancelled */
452 		usb_ep_fifo_flush(ep);
453 
454 	/* Synchronize with the smp_load_acquire() in sleep_thread() */
455 	smp_store_release(&bh->state, BUF_STATE_EMPTY);
456 	wake_up(&common->io_wait);
457 }
458 
459 static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req)
460 {
461 	struct fsg_common	*common = ep->driver_data;
462 	struct fsg_buffhd	*bh = req->context;
463 
464 	dump_msg(common, "bulk-out", req->buf, req->actual);
465 	if (req->status || req->actual != bh->bulk_out_intended_length)
466 		DBG(common, "%s --> %d, %u/%u\n", __func__,
467 		    req->status, req->actual, bh->bulk_out_intended_length);
468 	if (req->status == -ECONNRESET)		/* Request was cancelled */
469 		usb_ep_fifo_flush(ep);
470 
471 	/* Synchronize with the smp_load_acquire() in sleep_thread() */
472 	smp_store_release(&bh->state, BUF_STATE_FULL);
473 	wake_up(&common->io_wait);
474 }
475 
476 static int _fsg_common_get_max_lun(struct fsg_common *common)
477 {
478 	int i = ARRAY_SIZE(common->luns) - 1;
479 
480 	while (i >= 0 && !common->luns[i])
481 		--i;
482 
483 	return i;
484 }
485 
486 static int fsg_setup(struct usb_function *f,
487 		     const struct usb_ctrlrequest *ctrl)
488 {
489 	struct fsg_dev		*fsg = fsg_from_func(f);
490 	struct usb_request	*req = fsg->common->ep0req;
491 	u16			w_index = le16_to_cpu(ctrl->wIndex);
492 	u16			w_value = le16_to_cpu(ctrl->wValue);
493 	u16			w_length = le16_to_cpu(ctrl->wLength);
494 
495 	if (!fsg_is_set(fsg->common))
496 		return -EOPNOTSUPP;
497 
498 	++fsg->common->ep0_req_tag;	/* Record arrival of a new request */
499 	req->context = NULL;
500 	req->length = 0;
501 	dump_msg(fsg, "ep0-setup", (u8 *) ctrl, sizeof(*ctrl));
502 
503 	switch (ctrl->bRequest) {
504 
505 	case US_BULK_RESET_REQUEST:
506 		if (ctrl->bRequestType !=
507 		    (USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE))
508 			break;
509 		if (w_index != fsg->interface_number || w_value != 0 ||
510 				w_length != 0)
511 			return -EDOM;
512 
513 		/*
514 		 * Raise an exception to stop the current operation
515 		 * and reinitialize our state.
516 		 */
517 		DBG(fsg, "bulk reset request\n");
518 		raise_exception(fsg->common, FSG_STATE_PROTOCOL_RESET);
519 		return USB_GADGET_DELAYED_STATUS;
520 
521 	case US_BULK_GET_MAX_LUN:
522 		if (ctrl->bRequestType !=
523 		    (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE))
524 			break;
525 		if (w_index != fsg->interface_number || w_value != 0 ||
526 				w_length != 1)
527 			return -EDOM;
528 		VDBG(fsg, "get max LUN\n");
529 		*(u8 *)req->buf = _fsg_common_get_max_lun(fsg->common);
530 
531 		/* Respond with data/status */
532 		req->length = min((u16)1, w_length);
533 		return ep0_queue(fsg->common);
534 	}
535 
536 	VDBG(fsg,
537 	     "unknown class-specific control req %02x.%02x v%04x i%04x l%u\n",
538 	     ctrl->bRequestType, ctrl->bRequest,
539 	     le16_to_cpu(ctrl->wValue), w_index, w_length);
540 	return -EOPNOTSUPP;
541 }
542 
543 
544 /*-------------------------------------------------------------------------*/
545 
546 /* All the following routines run in process context */
547 
548 /* Use this for bulk or interrupt transfers, not ep0 */
549 static int start_transfer(struct fsg_dev *fsg, struct usb_ep *ep,
550 			   struct usb_request *req)
551 {
552 	int	rc;
553 
554 	if (ep == fsg->bulk_in)
555 		dump_msg(fsg, "bulk-in", req->buf, req->length);
556 
557 	rc = usb_ep_queue(ep, req, GFP_KERNEL);
558 	if (rc) {
559 
560 		/* We can't do much more than wait for a reset */
561 		req->status = rc;
562 
563 		/*
564 		 * Note: currently the net2280 driver fails zero-length
565 		 * submissions if DMA is enabled.
566 		 */
567 		if (rc != -ESHUTDOWN &&
568 				!(rc == -EOPNOTSUPP && req->length == 0))
569 			WARNING(fsg, "error in submission: %s --> %d\n",
570 					ep->name, rc);
571 	}
572 	return rc;
573 }
574 
575 static bool start_in_transfer(struct fsg_common *common, struct fsg_buffhd *bh)
576 {
577 	if (!fsg_is_set(common))
578 		return false;
579 	bh->state = BUF_STATE_SENDING;
580 	if (start_transfer(common->fsg, common->fsg->bulk_in, bh->inreq))
581 		bh->state = BUF_STATE_EMPTY;
582 	return true;
583 }
584 
585 static bool start_out_transfer(struct fsg_common *common, struct fsg_buffhd *bh)
586 {
587 	if (!fsg_is_set(common))
588 		return false;
589 	bh->state = BUF_STATE_RECEIVING;
590 	if (start_transfer(common->fsg, common->fsg->bulk_out, bh->outreq))
591 		bh->state = BUF_STATE_FULL;
592 	return true;
593 }
594 
595 static int sleep_thread(struct fsg_common *common, bool can_freeze,
596 		struct fsg_buffhd *bh)
597 {
598 	int	rc;
599 
600 	/* Wait until a signal arrives or bh is no longer busy */
601 	if (can_freeze)
602 		/*
603 		 * synchronize with the smp_store_release(&bh->state) in
604 		 * bulk_in_complete() or bulk_out_complete()
605 		 */
606 		rc = wait_event_freezable(common->io_wait,
607 				bh && smp_load_acquire(&bh->state) >=
608 					BUF_STATE_EMPTY);
609 	else
610 		rc = wait_event_interruptible(common->io_wait,
611 				bh && smp_load_acquire(&bh->state) >=
612 					BUF_STATE_EMPTY);
613 	return rc ? -EINTR : 0;
614 }
615 
616 
617 /*-------------------------------------------------------------------------*/
618 
619 static int do_read(struct fsg_common *common)
620 {
621 	struct fsg_lun		*curlun = common->curlun;
622 	u32			lba;
623 	struct fsg_buffhd	*bh;
624 	int			rc;
625 	u32			amount_left;
626 	loff_t			file_offset, file_offset_tmp;
627 	unsigned int		amount;
628 	ssize_t			nread;
629 
630 	/*
631 	 * Get the starting Logical Block Address and check that it's
632 	 * not too big.
633 	 */
634 	if (common->cmnd[0] == READ_6)
635 		lba = get_unaligned_be24(&common->cmnd[1]);
636 	else {
637 		lba = get_unaligned_be32(&common->cmnd[2]);
638 
639 		/*
640 		 * We allow DPO (Disable Page Out = don't save data in the
641 		 * cache) and FUA (Force Unit Access = don't read from the
642 		 * cache), but we don't implement them.
643 		 */
644 		if ((common->cmnd[1] & ~0x18) != 0) {
645 			curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
646 			return -EINVAL;
647 		}
648 	}
649 	if (lba >= curlun->num_sectors) {
650 		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
651 		return -EINVAL;
652 	}
653 	file_offset = ((loff_t) lba) << curlun->blkbits;
654 
655 	/* Carry out the file reads */
656 	amount_left = common->data_size_from_cmnd;
657 	if (unlikely(amount_left == 0))
658 		return -EIO;		/* No default reply */
659 
660 	for (;;) {
661 		/*
662 		 * Figure out how much we need to read:
663 		 * Try to read the remaining amount.
664 		 * But don't read more than the buffer size.
665 		 * And don't try to read past the end of the file.
666 		 */
667 		amount = min(amount_left, FSG_BUFLEN);
668 		amount = min((loff_t)amount,
669 			     curlun->file_length - file_offset);
670 
671 		/* Wait for the next buffer to become available */
672 		bh = common->next_buffhd_to_fill;
673 		rc = sleep_thread(common, false, bh);
674 		if (rc)
675 			return rc;
676 
677 		/*
678 		 * If we were asked to read past the end of file,
679 		 * end with an empty buffer.
680 		 */
681 		if (amount == 0) {
682 			curlun->sense_data =
683 					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
684 			curlun->sense_data_info =
685 					file_offset >> curlun->blkbits;
686 			curlun->info_valid = 1;
687 			bh->inreq->length = 0;
688 			bh->state = BUF_STATE_FULL;
689 			break;
690 		}
691 
692 		/* Perform the read */
693 		file_offset_tmp = file_offset;
694 		nread = kernel_read(curlun->filp, bh->buf, amount,
695 				&file_offset_tmp);
696 		VLDBG(curlun, "file read %u @ %llu -> %d\n", amount,
697 		      (unsigned long long)file_offset, (int)nread);
698 		if (signal_pending(current))
699 			return -EINTR;
700 
701 		if (nread < 0) {
702 			LDBG(curlun, "error in file read: %d\n", (int)nread);
703 			nread = 0;
704 		} else if (nread < amount) {
705 			LDBG(curlun, "partial file read: %d/%u\n",
706 			     (int)nread, amount);
707 			nread = round_down(nread, curlun->blksize);
708 		}
709 		file_offset  += nread;
710 		amount_left  -= nread;
711 		common->residue -= nread;
712 
713 		/*
714 		 * Except at the end of the transfer, nread will be
715 		 * equal to the buffer size, which is divisible by the
716 		 * bulk-in maxpacket size.
717 		 */
718 		bh->inreq->length = nread;
719 		bh->state = BUF_STATE_FULL;
720 
721 		/* If an error occurred, report it and its position */
722 		if (nread < amount) {
723 			curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
724 			curlun->sense_data_info =
725 					file_offset >> curlun->blkbits;
726 			curlun->info_valid = 1;
727 			break;
728 		}
729 
730 		if (amount_left == 0)
731 			break;		/* No more left to read */
732 
733 		/* Send this buffer and go read some more */
734 		bh->inreq->zero = 0;
735 		if (!start_in_transfer(common, bh))
736 			/* Don't know what to do if common->fsg is NULL */
737 			return -EIO;
738 		common->next_buffhd_to_fill = bh->next;
739 	}
740 
741 	return -EIO;		/* No default reply */
742 }
743 
744 
745 /*-------------------------------------------------------------------------*/
746 
747 static int do_write(struct fsg_common *common)
748 {
749 	struct fsg_lun		*curlun = common->curlun;
750 	u32			lba;
751 	struct fsg_buffhd	*bh;
752 	int			get_some_more;
753 	u32			amount_left_to_req, amount_left_to_write;
754 	loff_t			usb_offset, file_offset, file_offset_tmp;
755 	unsigned int		amount;
756 	ssize_t			nwritten;
757 	int			rc;
758 
759 	if (curlun->ro) {
760 		curlun->sense_data = SS_WRITE_PROTECTED;
761 		return -EINVAL;
762 	}
763 	spin_lock(&curlun->filp->f_lock);
764 	curlun->filp->f_flags &= ~O_SYNC;	/* Default is not to wait */
765 	spin_unlock(&curlun->filp->f_lock);
766 
767 	/*
768 	 * Get the starting Logical Block Address and check that it's
769 	 * not too big
770 	 */
771 	if (common->cmnd[0] == WRITE_6)
772 		lba = get_unaligned_be24(&common->cmnd[1]);
773 	else {
774 		lba = get_unaligned_be32(&common->cmnd[2]);
775 
776 		/*
777 		 * We allow DPO (Disable Page Out = don't save data in the
778 		 * cache) and FUA (Force Unit Access = write directly to the
779 		 * medium).  We don't implement DPO; we implement FUA by
780 		 * performing synchronous output.
781 		 */
782 		if (common->cmnd[1] & ~0x18) {
783 			curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
784 			return -EINVAL;
785 		}
786 		if (!curlun->nofua && (common->cmnd[1] & 0x08)) { /* FUA */
787 			spin_lock(&curlun->filp->f_lock);
788 			curlun->filp->f_flags |= O_SYNC;
789 			spin_unlock(&curlun->filp->f_lock);
790 		}
791 	}
792 	if (lba >= curlun->num_sectors) {
793 		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
794 		return -EINVAL;
795 	}
796 
797 	/* Carry out the file writes */
798 	get_some_more = 1;
799 	file_offset = usb_offset = ((loff_t) lba) << curlun->blkbits;
800 	amount_left_to_req = common->data_size_from_cmnd;
801 	amount_left_to_write = common->data_size_from_cmnd;
802 
803 	while (amount_left_to_write > 0) {
804 
805 		/* Queue a request for more data from the host */
806 		bh = common->next_buffhd_to_fill;
807 		if (bh->state == BUF_STATE_EMPTY && get_some_more) {
808 
809 			/*
810 			 * Figure out how much we want to get:
811 			 * Try to get the remaining amount,
812 			 * but not more than the buffer size.
813 			 */
814 			amount = min(amount_left_to_req, FSG_BUFLEN);
815 
816 			/* Beyond the end of the backing file? */
817 			if (usb_offset >= curlun->file_length) {
818 				get_some_more = 0;
819 				curlun->sense_data =
820 					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
821 				curlun->sense_data_info =
822 					usb_offset >> curlun->blkbits;
823 				curlun->info_valid = 1;
824 				continue;
825 			}
826 
827 			/* Get the next buffer */
828 			usb_offset += amount;
829 			common->usb_amount_left -= amount;
830 			amount_left_to_req -= amount;
831 			if (amount_left_to_req == 0)
832 				get_some_more = 0;
833 
834 			/*
835 			 * Except at the end of the transfer, amount will be
836 			 * equal to the buffer size, which is divisible by
837 			 * the bulk-out maxpacket size.
838 			 */
839 			set_bulk_out_req_length(common, bh, amount);
840 			if (!start_out_transfer(common, bh))
841 				/* Dunno what to do if common->fsg is NULL */
842 				return -EIO;
843 			common->next_buffhd_to_fill = bh->next;
844 			continue;
845 		}
846 
847 		/* Write the received data to the backing file */
848 		bh = common->next_buffhd_to_drain;
849 		if (bh->state == BUF_STATE_EMPTY && !get_some_more)
850 			break;			/* We stopped early */
851 
852 		/* Wait for the data to be received */
853 		rc = sleep_thread(common, false, bh);
854 		if (rc)
855 			return rc;
856 
857 		common->next_buffhd_to_drain = bh->next;
858 		bh->state = BUF_STATE_EMPTY;
859 
860 		/* Did something go wrong with the transfer? */
861 		if (bh->outreq->status != 0) {
862 			curlun->sense_data = SS_COMMUNICATION_FAILURE;
863 			curlun->sense_data_info =
864 					file_offset >> curlun->blkbits;
865 			curlun->info_valid = 1;
866 			break;
867 		}
868 
869 		amount = bh->outreq->actual;
870 		if (curlun->file_length - file_offset < amount) {
871 			LERROR(curlun, "write %u @ %llu beyond end %llu\n",
872 				       amount, (unsigned long long)file_offset,
873 				       (unsigned long long)curlun->file_length);
874 			amount = curlun->file_length - file_offset;
875 		}
876 
877 		/*
878 		 * Don't accept excess data.  The spec doesn't say
879 		 * what to do in this case.  We'll ignore the error.
880 		 */
881 		amount = min(amount, bh->bulk_out_intended_length);
882 
883 		/* Don't write a partial block */
884 		amount = round_down(amount, curlun->blksize);
885 		if (amount == 0)
886 			goto empty_write;
887 
888 		/* Perform the write */
889 		file_offset_tmp = file_offset;
890 		nwritten = kernel_write(curlun->filp, bh->buf, amount,
891 				&file_offset_tmp);
892 		VLDBG(curlun, "file write %u @ %llu -> %d\n", amount,
893 				(unsigned long long)file_offset, (int)nwritten);
894 		if (signal_pending(current))
895 			return -EINTR;		/* Interrupted! */
896 
897 		if (nwritten < 0) {
898 			LDBG(curlun, "error in file write: %d\n",
899 					(int) nwritten);
900 			nwritten = 0;
901 		} else if (nwritten < amount) {
902 			LDBG(curlun, "partial file write: %d/%u\n",
903 					(int) nwritten, amount);
904 			nwritten = round_down(nwritten, curlun->blksize);
905 		}
906 		file_offset += nwritten;
907 		amount_left_to_write -= nwritten;
908 		common->residue -= nwritten;
909 
910 		/* If an error occurred, report it and its position */
911 		if (nwritten < amount) {
912 			curlun->sense_data = SS_WRITE_ERROR;
913 			curlun->sense_data_info =
914 					file_offset >> curlun->blkbits;
915 			curlun->info_valid = 1;
916 			break;
917 		}
918 
919  empty_write:
920 		/* Did the host decide to stop early? */
921 		if (bh->outreq->actual < bh->bulk_out_intended_length) {
922 			common->short_packet_received = 1;
923 			break;
924 		}
925 	}
926 
927 	return -EIO;		/* No default reply */
928 }
929 
930 
931 /*-------------------------------------------------------------------------*/
932 
933 static int do_synchronize_cache(struct fsg_common *common)
934 {
935 	struct fsg_lun	*curlun = common->curlun;
936 	int		rc;
937 
938 	/* We ignore the requested LBA and write out all file's
939 	 * dirty data buffers. */
940 	rc = fsg_lun_fsync_sub(curlun);
941 	if (rc)
942 		curlun->sense_data = SS_WRITE_ERROR;
943 	return 0;
944 }
945 
946 
947 /*-------------------------------------------------------------------------*/
948 
949 static void invalidate_sub(struct fsg_lun *curlun)
950 {
951 	struct file	*filp = curlun->filp;
952 	struct inode	*inode = file_inode(filp);
953 	unsigned long	rc;
954 
955 	rc = invalidate_mapping_pages(inode->i_mapping, 0, -1);
956 	VLDBG(curlun, "invalidate_mapping_pages -> %ld\n", rc);
957 }
958 
959 static int do_verify(struct fsg_common *common)
960 {
961 	struct fsg_lun		*curlun = common->curlun;
962 	u32			lba;
963 	u32			verification_length;
964 	struct fsg_buffhd	*bh = common->next_buffhd_to_fill;
965 	loff_t			file_offset, file_offset_tmp;
966 	u32			amount_left;
967 	unsigned int		amount;
968 	ssize_t			nread;
969 
970 	/*
971 	 * Get the starting Logical Block Address and check that it's
972 	 * not too big.
973 	 */
974 	lba = get_unaligned_be32(&common->cmnd[2]);
975 	if (lba >= curlun->num_sectors) {
976 		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
977 		return -EINVAL;
978 	}
979 
980 	/*
981 	 * We allow DPO (Disable Page Out = don't save data in the
982 	 * cache) but we don't implement it.
983 	 */
984 	if (common->cmnd[1] & ~0x10) {
985 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
986 		return -EINVAL;
987 	}
988 
989 	verification_length = get_unaligned_be16(&common->cmnd[7]);
990 	if (unlikely(verification_length == 0))
991 		return -EIO;		/* No default reply */
992 
993 	/* Prepare to carry out the file verify */
994 	amount_left = verification_length << curlun->blkbits;
995 	file_offset = ((loff_t) lba) << curlun->blkbits;
996 
997 	/* Write out all the dirty buffers before invalidating them */
998 	fsg_lun_fsync_sub(curlun);
999 	if (signal_pending(current))
1000 		return -EINTR;
1001 
1002 	invalidate_sub(curlun);
1003 	if (signal_pending(current))
1004 		return -EINTR;
1005 
1006 	/* Just try to read the requested blocks */
1007 	while (amount_left > 0) {
1008 		/*
1009 		 * Figure out how much we need to read:
1010 		 * Try to read the remaining amount, but not more than
1011 		 * the buffer size.
1012 		 * And don't try to read past the end of the file.
1013 		 */
1014 		amount = min(amount_left, FSG_BUFLEN);
1015 		amount = min((loff_t)amount,
1016 			     curlun->file_length - file_offset);
1017 		if (amount == 0) {
1018 			curlun->sense_data =
1019 					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
1020 			curlun->sense_data_info =
1021 				file_offset >> curlun->blkbits;
1022 			curlun->info_valid = 1;
1023 			break;
1024 		}
1025 
1026 		/* Perform the read */
1027 		file_offset_tmp = file_offset;
1028 		nread = kernel_read(curlun->filp, bh->buf, amount,
1029 				&file_offset_tmp);
1030 		VLDBG(curlun, "file read %u @ %llu -> %d\n", amount,
1031 				(unsigned long long) file_offset,
1032 				(int) nread);
1033 		if (signal_pending(current))
1034 			return -EINTR;
1035 
1036 		if (nread < 0) {
1037 			LDBG(curlun, "error in file verify: %d\n", (int)nread);
1038 			nread = 0;
1039 		} else if (nread < amount) {
1040 			LDBG(curlun, "partial file verify: %d/%u\n",
1041 			     (int)nread, amount);
1042 			nread = round_down(nread, curlun->blksize);
1043 		}
1044 		if (nread == 0) {
1045 			curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
1046 			curlun->sense_data_info =
1047 				file_offset >> curlun->blkbits;
1048 			curlun->info_valid = 1;
1049 			break;
1050 		}
1051 		file_offset += nread;
1052 		amount_left -= nread;
1053 	}
1054 	return 0;
1055 }
1056 
1057 
1058 /*-------------------------------------------------------------------------*/
1059 
1060 static int do_inquiry(struct fsg_common *common, struct fsg_buffhd *bh)
1061 {
1062 	struct fsg_lun *curlun = common->curlun;
1063 	u8	*buf = (u8 *) bh->buf;
1064 
1065 	if (!curlun) {		/* Unsupported LUNs are okay */
1066 		common->bad_lun_okay = 1;
1067 		memset(buf, 0, 36);
1068 		buf[0] = TYPE_NO_LUN;	/* Unsupported, no device-type */
1069 		buf[4] = 31;		/* Additional length */
1070 		return 36;
1071 	}
1072 
1073 	buf[0] = curlun->cdrom ? TYPE_ROM : TYPE_DISK;
1074 	buf[1] = curlun->removable ? 0x80 : 0;
1075 	buf[2] = 2;		/* ANSI SCSI level 2 */
1076 	buf[3] = 2;		/* SCSI-2 INQUIRY data format */
1077 	buf[4] = 31;		/* Additional length */
1078 	buf[5] = 0;		/* No special options */
1079 	buf[6] = 0;
1080 	buf[7] = 0;
1081 	if (curlun->inquiry_string[0])
1082 		memcpy(buf + 8, curlun->inquiry_string,
1083 		       sizeof(curlun->inquiry_string));
1084 	else
1085 		memcpy(buf + 8, common->inquiry_string,
1086 		       sizeof(common->inquiry_string));
1087 	return 36;
1088 }
1089 
1090 static int do_request_sense(struct fsg_common *common, struct fsg_buffhd *bh)
1091 {
1092 	struct fsg_lun	*curlun = common->curlun;
1093 	u8		*buf = (u8 *) bh->buf;
1094 	u32		sd, sdinfo;
1095 	int		valid;
1096 
1097 	/*
1098 	 * From the SCSI-2 spec., section 7.9 (Unit attention condition):
1099 	 *
1100 	 * If a REQUEST SENSE command is received from an initiator
1101 	 * with a pending unit attention condition (before the target
1102 	 * generates the contingent allegiance condition), then the
1103 	 * target shall either:
1104 	 *   a) report any pending sense data and preserve the unit
1105 	 *	attention condition on the logical unit, or,
1106 	 *   b) report the unit attention condition, may discard any
1107 	 *	pending sense data, and clear the unit attention
1108 	 *	condition on the logical unit for that initiator.
1109 	 *
1110 	 * FSG normally uses option a); enable this code to use option b).
1111 	 */
1112 #if 0
1113 	if (curlun && curlun->unit_attention_data != SS_NO_SENSE) {
1114 		curlun->sense_data = curlun->unit_attention_data;
1115 		curlun->unit_attention_data = SS_NO_SENSE;
1116 	}
1117 #endif
1118 
1119 	if (!curlun) {		/* Unsupported LUNs are okay */
1120 		common->bad_lun_okay = 1;
1121 		sd = SS_LOGICAL_UNIT_NOT_SUPPORTED;
1122 		sdinfo = 0;
1123 		valid = 0;
1124 	} else {
1125 		sd = curlun->sense_data;
1126 		sdinfo = curlun->sense_data_info;
1127 		valid = curlun->info_valid << 7;
1128 		curlun->sense_data = SS_NO_SENSE;
1129 		curlun->sense_data_info = 0;
1130 		curlun->info_valid = 0;
1131 	}
1132 
1133 	memset(buf, 0, 18);
1134 	buf[0] = valid | 0x70;			/* Valid, current error */
1135 	buf[2] = SK(sd);
1136 	put_unaligned_be32(sdinfo, &buf[3]);	/* Sense information */
1137 	buf[7] = 18 - 8;			/* Additional sense length */
1138 	buf[12] = ASC(sd);
1139 	buf[13] = ASCQ(sd);
1140 	return 18;
1141 }
1142 
1143 static int do_read_capacity(struct fsg_common *common, struct fsg_buffhd *bh)
1144 {
1145 	struct fsg_lun	*curlun = common->curlun;
1146 	u32		lba = get_unaligned_be32(&common->cmnd[2]);
1147 	int		pmi = common->cmnd[8];
1148 	u8		*buf = (u8 *)bh->buf;
1149 
1150 	/* Check the PMI and LBA fields */
1151 	if (pmi > 1 || (pmi == 0 && lba != 0)) {
1152 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1153 		return -EINVAL;
1154 	}
1155 
1156 	put_unaligned_be32(curlun->num_sectors - 1, &buf[0]);
1157 						/* Max logical block */
1158 	put_unaligned_be32(curlun->blksize, &buf[4]);/* Block length */
1159 	return 8;
1160 }
1161 
1162 static int do_read_header(struct fsg_common *common, struct fsg_buffhd *bh)
1163 {
1164 	struct fsg_lun	*curlun = common->curlun;
1165 	int		msf = common->cmnd[1] & 0x02;
1166 	u32		lba = get_unaligned_be32(&common->cmnd[2]);
1167 	u8		*buf = (u8 *)bh->buf;
1168 
1169 	if (common->cmnd[1] & ~0x02) {		/* Mask away MSF */
1170 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1171 		return -EINVAL;
1172 	}
1173 	if (lba >= curlun->num_sectors) {
1174 		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
1175 		return -EINVAL;
1176 	}
1177 
1178 	memset(buf, 0, 8);
1179 	buf[0] = 0x01;		/* 2048 bytes of user data, rest is EC */
1180 	store_cdrom_address(&buf[4], msf, lba);
1181 	return 8;
1182 }
1183 
1184 static int do_read_toc(struct fsg_common *common, struct fsg_buffhd *bh)
1185 {
1186 	struct fsg_lun	*curlun = common->curlun;
1187 	int		msf = common->cmnd[1] & 0x02;
1188 	int		start_track = common->cmnd[6];
1189 	u8		*buf = (u8 *)bh->buf;
1190 
1191 	if ((common->cmnd[1] & ~0x02) != 0 ||	/* Mask away MSF */
1192 			start_track > 1) {
1193 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1194 		return -EINVAL;
1195 	}
1196 
1197 	memset(buf, 0, 20);
1198 	buf[1] = (20-2);		/* TOC data length */
1199 	buf[2] = 1;			/* First track number */
1200 	buf[3] = 1;			/* Last track number */
1201 	buf[5] = 0x16;			/* Data track, copying allowed */
1202 	buf[6] = 0x01;			/* Only track is number 1 */
1203 	store_cdrom_address(&buf[8], msf, 0);
1204 
1205 	buf[13] = 0x16;			/* Lead-out track is data */
1206 	buf[14] = 0xAA;			/* Lead-out track number */
1207 	store_cdrom_address(&buf[16], msf, curlun->num_sectors);
1208 	return 20;
1209 }
1210 
1211 static int do_mode_sense(struct fsg_common *common, struct fsg_buffhd *bh)
1212 {
1213 	struct fsg_lun	*curlun = common->curlun;
1214 	int		mscmnd = common->cmnd[0];
1215 	u8		*buf = (u8 *) bh->buf;
1216 	u8		*buf0 = buf;
1217 	int		pc, page_code;
1218 	int		changeable_values, all_pages;
1219 	int		valid_page = 0;
1220 	int		len, limit;
1221 
1222 	if ((common->cmnd[1] & ~0x08) != 0) {	/* Mask away DBD */
1223 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1224 		return -EINVAL;
1225 	}
1226 	pc = common->cmnd[2] >> 6;
1227 	page_code = common->cmnd[2] & 0x3f;
1228 	if (pc == 3) {
1229 		curlun->sense_data = SS_SAVING_PARAMETERS_NOT_SUPPORTED;
1230 		return -EINVAL;
1231 	}
1232 	changeable_values = (pc == 1);
1233 	all_pages = (page_code == 0x3f);
1234 
1235 	/*
1236 	 * Write the mode parameter header.  Fixed values are: default
1237 	 * medium type, no cache control (DPOFUA), and no block descriptors.
1238 	 * The only variable value is the WriteProtect bit.  We will fill in
1239 	 * the mode data length later.
1240 	 */
1241 	memset(buf, 0, 8);
1242 	if (mscmnd == MODE_SENSE) {
1243 		buf[2] = (curlun->ro ? 0x80 : 0x00);		/* WP, DPOFUA */
1244 		buf += 4;
1245 		limit = 255;
1246 	} else {			/* MODE_SENSE_10 */
1247 		buf[3] = (curlun->ro ? 0x80 : 0x00);		/* WP, DPOFUA */
1248 		buf += 8;
1249 		limit = 65535;		/* Should really be FSG_BUFLEN */
1250 	}
1251 
1252 	/* No block descriptors */
1253 
1254 	/*
1255 	 * The mode pages, in numerical order.  The only page we support
1256 	 * is the Caching page.
1257 	 */
1258 	if (page_code == 0x08 || all_pages) {
1259 		valid_page = 1;
1260 		buf[0] = 0x08;		/* Page code */
1261 		buf[1] = 10;		/* Page length */
1262 		memset(buf+2, 0, 10);	/* None of the fields are changeable */
1263 
1264 		if (!changeable_values) {
1265 			buf[2] = 0x04;	/* Write cache enable, */
1266 					/* Read cache not disabled */
1267 					/* No cache retention priorities */
1268 			put_unaligned_be16(0xffff, &buf[4]);
1269 					/* Don't disable prefetch */
1270 					/* Minimum prefetch = 0 */
1271 			put_unaligned_be16(0xffff, &buf[8]);
1272 					/* Maximum prefetch */
1273 			put_unaligned_be16(0xffff, &buf[10]);
1274 					/* Maximum prefetch ceiling */
1275 		}
1276 		buf += 12;
1277 	}
1278 
1279 	/*
1280 	 * Check that a valid page was requested and the mode data length
1281 	 * isn't too long.
1282 	 */
1283 	len = buf - buf0;
1284 	if (!valid_page || len > limit) {
1285 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1286 		return -EINVAL;
1287 	}
1288 
1289 	/*  Store the mode data length */
1290 	if (mscmnd == MODE_SENSE)
1291 		buf0[0] = len - 1;
1292 	else
1293 		put_unaligned_be16(len - 2, buf0);
1294 	return len;
1295 }
1296 
1297 static int do_start_stop(struct fsg_common *common)
1298 {
1299 	struct fsg_lun	*curlun = common->curlun;
1300 	int		loej, start;
1301 
1302 	if (!curlun) {
1303 		return -EINVAL;
1304 	} else if (!curlun->removable) {
1305 		curlun->sense_data = SS_INVALID_COMMAND;
1306 		return -EINVAL;
1307 	} else if ((common->cmnd[1] & ~0x01) != 0 || /* Mask away Immed */
1308 		   (common->cmnd[4] & ~0x03) != 0) { /* Mask LoEj, Start */
1309 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1310 		return -EINVAL;
1311 	}
1312 
1313 	loej  = common->cmnd[4] & 0x02;
1314 	start = common->cmnd[4] & 0x01;
1315 
1316 	/*
1317 	 * Our emulation doesn't support mounting; the medium is
1318 	 * available for use as soon as it is loaded.
1319 	 */
1320 	if (start) {
1321 		if (!fsg_lun_is_open(curlun)) {
1322 			curlun->sense_data = SS_MEDIUM_NOT_PRESENT;
1323 			return -EINVAL;
1324 		}
1325 		return 0;
1326 	}
1327 
1328 	/* Are we allowed to unload the media? */
1329 	if (curlun->prevent_medium_removal) {
1330 		LDBG(curlun, "unload attempt prevented\n");
1331 		curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED;
1332 		return -EINVAL;
1333 	}
1334 
1335 	if (!loej)
1336 		return 0;
1337 
1338 	up_read(&common->filesem);
1339 	down_write(&common->filesem);
1340 	fsg_lun_close(curlun);
1341 	up_write(&common->filesem);
1342 	down_read(&common->filesem);
1343 
1344 	return 0;
1345 }
1346 
1347 static int do_prevent_allow(struct fsg_common *common)
1348 {
1349 	struct fsg_lun	*curlun = common->curlun;
1350 	int		prevent;
1351 
1352 	if (!common->curlun) {
1353 		return -EINVAL;
1354 	} else if (!common->curlun->removable) {
1355 		common->curlun->sense_data = SS_INVALID_COMMAND;
1356 		return -EINVAL;
1357 	}
1358 
1359 	prevent = common->cmnd[4] & 0x01;
1360 	if ((common->cmnd[4] & ~0x01) != 0) {	/* Mask away Prevent */
1361 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1362 		return -EINVAL;
1363 	}
1364 
1365 	if (curlun->prevent_medium_removal && !prevent)
1366 		fsg_lun_fsync_sub(curlun);
1367 	curlun->prevent_medium_removal = prevent;
1368 	return 0;
1369 }
1370 
1371 static int do_read_format_capacities(struct fsg_common *common,
1372 			struct fsg_buffhd *bh)
1373 {
1374 	struct fsg_lun	*curlun = common->curlun;
1375 	u8		*buf = (u8 *) bh->buf;
1376 
1377 	buf[0] = buf[1] = buf[2] = 0;
1378 	buf[3] = 8;	/* Only the Current/Maximum Capacity Descriptor */
1379 	buf += 4;
1380 
1381 	put_unaligned_be32(curlun->num_sectors, &buf[0]);
1382 						/* Number of blocks */
1383 	put_unaligned_be32(curlun->blksize, &buf[4]);/* Block length */
1384 	buf[4] = 0x02;				/* Current capacity */
1385 	return 12;
1386 }
1387 
1388 static int do_mode_select(struct fsg_common *common, struct fsg_buffhd *bh)
1389 {
1390 	struct fsg_lun	*curlun = common->curlun;
1391 
1392 	/* We don't support MODE SELECT */
1393 	if (curlun)
1394 		curlun->sense_data = SS_INVALID_COMMAND;
1395 	return -EINVAL;
1396 }
1397 
1398 
1399 /*-------------------------------------------------------------------------*/
1400 
1401 static int halt_bulk_in_endpoint(struct fsg_dev *fsg)
1402 {
1403 	int	rc;
1404 
1405 	rc = fsg_set_halt(fsg, fsg->bulk_in);
1406 	if (rc == -EAGAIN)
1407 		VDBG(fsg, "delayed bulk-in endpoint halt\n");
1408 	while (rc != 0) {
1409 		if (rc != -EAGAIN) {
1410 			WARNING(fsg, "usb_ep_set_halt -> %d\n", rc);
1411 			rc = 0;
1412 			break;
1413 		}
1414 
1415 		/* Wait for a short time and then try again */
1416 		if (msleep_interruptible(100) != 0)
1417 			return -EINTR;
1418 		rc = usb_ep_set_halt(fsg->bulk_in);
1419 	}
1420 	return rc;
1421 }
1422 
1423 static int wedge_bulk_in_endpoint(struct fsg_dev *fsg)
1424 {
1425 	int	rc;
1426 
1427 	DBG(fsg, "bulk-in set wedge\n");
1428 	rc = usb_ep_set_wedge(fsg->bulk_in);
1429 	if (rc == -EAGAIN)
1430 		VDBG(fsg, "delayed bulk-in endpoint wedge\n");
1431 	while (rc != 0) {
1432 		if (rc != -EAGAIN) {
1433 			WARNING(fsg, "usb_ep_set_wedge -> %d\n", rc);
1434 			rc = 0;
1435 			break;
1436 		}
1437 
1438 		/* Wait for a short time and then try again */
1439 		if (msleep_interruptible(100) != 0)
1440 			return -EINTR;
1441 		rc = usb_ep_set_wedge(fsg->bulk_in);
1442 	}
1443 	return rc;
1444 }
1445 
1446 static int throw_away_data(struct fsg_common *common)
1447 {
1448 	struct fsg_buffhd	*bh, *bh2;
1449 	u32			amount;
1450 	int			rc;
1451 
1452 	for (bh = common->next_buffhd_to_drain;
1453 	     bh->state != BUF_STATE_EMPTY || common->usb_amount_left > 0;
1454 	     bh = common->next_buffhd_to_drain) {
1455 
1456 		/* Try to submit another request if we need one */
1457 		bh2 = common->next_buffhd_to_fill;
1458 		if (bh2->state == BUF_STATE_EMPTY &&
1459 				common->usb_amount_left > 0) {
1460 			amount = min(common->usb_amount_left, FSG_BUFLEN);
1461 
1462 			/*
1463 			 * Except at the end of the transfer, amount will be
1464 			 * equal to the buffer size, which is divisible by
1465 			 * the bulk-out maxpacket size.
1466 			 */
1467 			set_bulk_out_req_length(common, bh2, amount);
1468 			if (!start_out_transfer(common, bh2))
1469 				/* Dunno what to do if common->fsg is NULL */
1470 				return -EIO;
1471 			common->next_buffhd_to_fill = bh2->next;
1472 			common->usb_amount_left -= amount;
1473 			continue;
1474 		}
1475 
1476 		/* Wait for the data to be received */
1477 		rc = sleep_thread(common, false, bh);
1478 		if (rc)
1479 			return rc;
1480 
1481 		/* Throw away the data in a filled buffer */
1482 		bh->state = BUF_STATE_EMPTY;
1483 		common->next_buffhd_to_drain = bh->next;
1484 
1485 		/* A short packet or an error ends everything */
1486 		if (bh->outreq->actual < bh->bulk_out_intended_length ||
1487 				bh->outreq->status != 0) {
1488 			raise_exception(common, FSG_STATE_ABORT_BULK_OUT);
1489 			return -EINTR;
1490 		}
1491 	}
1492 	return 0;
1493 }
1494 
1495 static int finish_reply(struct fsg_common *common)
1496 {
1497 	struct fsg_buffhd	*bh = common->next_buffhd_to_fill;
1498 	int			rc = 0;
1499 
1500 	switch (common->data_dir) {
1501 	case DATA_DIR_NONE:
1502 		break;			/* Nothing to send */
1503 
1504 	/*
1505 	 * If we don't know whether the host wants to read or write,
1506 	 * this must be CB or CBI with an unknown command.  We mustn't
1507 	 * try to send or receive any data.  So stall both bulk pipes
1508 	 * if we can and wait for a reset.
1509 	 */
1510 	case DATA_DIR_UNKNOWN:
1511 		if (!common->can_stall) {
1512 			/* Nothing */
1513 		} else if (fsg_is_set(common)) {
1514 			fsg_set_halt(common->fsg, common->fsg->bulk_out);
1515 			rc = halt_bulk_in_endpoint(common->fsg);
1516 		} else {
1517 			/* Don't know what to do if common->fsg is NULL */
1518 			rc = -EIO;
1519 		}
1520 		break;
1521 
1522 	/* All but the last buffer of data must have already been sent */
1523 	case DATA_DIR_TO_HOST:
1524 		if (common->data_size == 0) {
1525 			/* Nothing to send */
1526 
1527 		/* Don't know what to do if common->fsg is NULL */
1528 		} else if (!fsg_is_set(common)) {
1529 			rc = -EIO;
1530 
1531 		/* If there's no residue, simply send the last buffer */
1532 		} else if (common->residue == 0) {
1533 			bh->inreq->zero = 0;
1534 			if (!start_in_transfer(common, bh))
1535 				return -EIO;
1536 			common->next_buffhd_to_fill = bh->next;
1537 
1538 		/*
1539 		 * For Bulk-only, mark the end of the data with a short
1540 		 * packet.  If we are allowed to stall, halt the bulk-in
1541 		 * endpoint.  (Note: This violates the Bulk-Only Transport
1542 		 * specification, which requires us to pad the data if we
1543 		 * don't halt the endpoint.  Presumably nobody will mind.)
1544 		 */
1545 		} else {
1546 			bh->inreq->zero = 1;
1547 			if (!start_in_transfer(common, bh))
1548 				rc = -EIO;
1549 			common->next_buffhd_to_fill = bh->next;
1550 			if (common->can_stall)
1551 				rc = halt_bulk_in_endpoint(common->fsg);
1552 		}
1553 		break;
1554 
1555 	/*
1556 	 * We have processed all we want from the data the host has sent.
1557 	 * There may still be outstanding bulk-out requests.
1558 	 */
1559 	case DATA_DIR_FROM_HOST:
1560 		if (common->residue == 0) {
1561 			/* Nothing to receive */
1562 
1563 		/* Did the host stop sending unexpectedly early? */
1564 		} else if (common->short_packet_received) {
1565 			raise_exception(common, FSG_STATE_ABORT_BULK_OUT);
1566 			rc = -EINTR;
1567 
1568 		/*
1569 		 * We haven't processed all the incoming data.  Even though
1570 		 * we may be allowed to stall, doing so would cause a race.
1571 		 * The controller may already have ACK'ed all the remaining
1572 		 * bulk-out packets, in which case the host wouldn't see a
1573 		 * STALL.  Not realizing the endpoint was halted, it wouldn't
1574 		 * clear the halt -- leading to problems later on.
1575 		 */
1576 #if 0
1577 		} else if (common->can_stall) {
1578 			if (fsg_is_set(common))
1579 				fsg_set_halt(common->fsg,
1580 					     common->fsg->bulk_out);
1581 			raise_exception(common, FSG_STATE_ABORT_BULK_OUT);
1582 			rc = -EINTR;
1583 #endif
1584 
1585 		/*
1586 		 * We can't stall.  Read in the excess data and throw it
1587 		 * all away.
1588 		 */
1589 		} else {
1590 			rc = throw_away_data(common);
1591 		}
1592 		break;
1593 	}
1594 	return rc;
1595 }
1596 
1597 static void send_status(struct fsg_common *common)
1598 {
1599 	struct fsg_lun		*curlun = common->curlun;
1600 	struct fsg_buffhd	*bh;
1601 	struct bulk_cs_wrap	*csw;
1602 	int			rc;
1603 	u8			status = US_BULK_STAT_OK;
1604 	u32			sd, sdinfo = 0;
1605 
1606 	/* Wait for the next buffer to become available */
1607 	bh = common->next_buffhd_to_fill;
1608 	rc = sleep_thread(common, false, bh);
1609 	if (rc)
1610 		return;
1611 
1612 	if (curlun) {
1613 		sd = curlun->sense_data;
1614 		sdinfo = curlun->sense_data_info;
1615 	} else if (common->bad_lun_okay)
1616 		sd = SS_NO_SENSE;
1617 	else
1618 		sd = SS_LOGICAL_UNIT_NOT_SUPPORTED;
1619 
1620 	if (common->phase_error) {
1621 		DBG(common, "sending phase-error status\n");
1622 		status = US_BULK_STAT_PHASE;
1623 		sd = SS_INVALID_COMMAND;
1624 	} else if (sd != SS_NO_SENSE) {
1625 		DBG(common, "sending command-failure status\n");
1626 		status = US_BULK_STAT_FAIL;
1627 		VDBG(common, "  sense data: SK x%02x, ASC x%02x, ASCQ x%02x;"
1628 				"  info x%x\n",
1629 				SK(sd), ASC(sd), ASCQ(sd), sdinfo);
1630 	}
1631 
1632 	/* Store and send the Bulk-only CSW */
1633 	csw = (void *)bh->buf;
1634 
1635 	csw->Signature = cpu_to_le32(US_BULK_CS_SIGN);
1636 	csw->Tag = common->tag;
1637 	csw->Residue = cpu_to_le32(common->residue);
1638 	csw->Status = status;
1639 
1640 	bh->inreq->length = US_BULK_CS_WRAP_LEN;
1641 	bh->inreq->zero = 0;
1642 	if (!start_in_transfer(common, bh))
1643 		/* Don't know what to do if common->fsg is NULL */
1644 		return;
1645 
1646 	common->next_buffhd_to_fill = bh->next;
1647 	return;
1648 }
1649 
1650 
1651 /*-------------------------------------------------------------------------*/
1652 
1653 /*
1654  * Check whether the command is properly formed and whether its data size
1655  * and direction agree with the values we already have.
1656  */
1657 static int check_command(struct fsg_common *common, int cmnd_size,
1658 			 enum data_direction data_dir, unsigned int mask,
1659 			 int needs_medium, const char *name)
1660 {
1661 	int			i;
1662 	unsigned int		lun = common->cmnd[1] >> 5;
1663 	static const char	dirletter[4] = {'u', 'o', 'i', 'n'};
1664 	char			hdlen[20];
1665 	struct fsg_lun		*curlun;
1666 
1667 	hdlen[0] = 0;
1668 	if (common->data_dir != DATA_DIR_UNKNOWN)
1669 		sprintf(hdlen, ", H%c=%u", dirletter[(int) common->data_dir],
1670 			common->data_size);
1671 	VDBG(common, "SCSI command: %s;  Dc=%d, D%c=%u;  Hc=%d%s\n",
1672 	     name, cmnd_size, dirletter[(int) data_dir],
1673 	     common->data_size_from_cmnd, common->cmnd_size, hdlen);
1674 
1675 	/*
1676 	 * We can't reply at all until we know the correct data direction
1677 	 * and size.
1678 	 */
1679 	if (common->data_size_from_cmnd == 0)
1680 		data_dir = DATA_DIR_NONE;
1681 	if (common->data_size < common->data_size_from_cmnd) {
1682 		/*
1683 		 * Host data size < Device data size is a phase error.
1684 		 * Carry out the command, but only transfer as much as
1685 		 * we are allowed.
1686 		 */
1687 		common->data_size_from_cmnd = common->data_size;
1688 		common->phase_error = 1;
1689 	}
1690 	common->residue = common->data_size;
1691 	common->usb_amount_left = common->data_size;
1692 
1693 	/* Conflicting data directions is a phase error */
1694 	if (common->data_dir != data_dir && common->data_size_from_cmnd > 0) {
1695 		common->phase_error = 1;
1696 		return -EINVAL;
1697 	}
1698 
1699 	/* Verify the length of the command itself */
1700 	if (cmnd_size != common->cmnd_size) {
1701 
1702 		/*
1703 		 * Special case workaround: There are plenty of buggy SCSI
1704 		 * implementations. Many have issues with cbw->Length
1705 		 * field passing a wrong command size. For those cases we
1706 		 * always try to work around the problem by using the length
1707 		 * sent by the host side provided it is at least as large
1708 		 * as the correct command length.
1709 		 * Examples of such cases would be MS-Windows, which issues
1710 		 * REQUEST SENSE with cbw->Length == 12 where it should
1711 		 * be 6, and xbox360 issuing INQUIRY, TEST UNIT READY and
1712 		 * REQUEST SENSE with cbw->Length == 10 where it should
1713 		 * be 6 as well.
1714 		 */
1715 		if (cmnd_size <= common->cmnd_size) {
1716 			DBG(common, "%s is buggy! Expected length %d "
1717 			    "but we got %d\n", name,
1718 			    cmnd_size, common->cmnd_size);
1719 			cmnd_size = common->cmnd_size;
1720 		} else {
1721 			common->phase_error = 1;
1722 			return -EINVAL;
1723 		}
1724 	}
1725 
1726 	/* Check that the LUN values are consistent */
1727 	if (common->lun != lun)
1728 		DBG(common, "using LUN %u from CBW, not LUN %u from CDB\n",
1729 		    common->lun, lun);
1730 
1731 	/* Check the LUN */
1732 	curlun = common->curlun;
1733 	if (curlun) {
1734 		if (common->cmnd[0] != REQUEST_SENSE) {
1735 			curlun->sense_data = SS_NO_SENSE;
1736 			curlun->sense_data_info = 0;
1737 			curlun->info_valid = 0;
1738 		}
1739 	} else {
1740 		common->bad_lun_okay = 0;
1741 
1742 		/*
1743 		 * INQUIRY and REQUEST SENSE commands are explicitly allowed
1744 		 * to use unsupported LUNs; all others may not.
1745 		 */
1746 		if (common->cmnd[0] != INQUIRY &&
1747 		    common->cmnd[0] != REQUEST_SENSE) {
1748 			DBG(common, "unsupported LUN %u\n", common->lun);
1749 			return -EINVAL;
1750 		}
1751 	}
1752 
1753 	/*
1754 	 * If a unit attention condition exists, only INQUIRY and
1755 	 * REQUEST SENSE commands are allowed; anything else must fail.
1756 	 */
1757 	if (curlun && curlun->unit_attention_data != SS_NO_SENSE &&
1758 	    common->cmnd[0] != INQUIRY &&
1759 	    common->cmnd[0] != REQUEST_SENSE) {
1760 		curlun->sense_data = curlun->unit_attention_data;
1761 		curlun->unit_attention_data = SS_NO_SENSE;
1762 		return -EINVAL;
1763 	}
1764 
1765 	/* Check that only command bytes listed in the mask are non-zero */
1766 	common->cmnd[1] &= 0x1f;			/* Mask away the LUN */
1767 	for (i = 1; i < cmnd_size; ++i) {
1768 		if (common->cmnd[i] && !(mask & (1 << i))) {
1769 			if (curlun)
1770 				curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1771 			return -EINVAL;
1772 		}
1773 	}
1774 
1775 	/* If the medium isn't mounted and the command needs to access
1776 	 * it, return an error. */
1777 	if (curlun && !fsg_lun_is_open(curlun) && needs_medium) {
1778 		curlun->sense_data = SS_MEDIUM_NOT_PRESENT;
1779 		return -EINVAL;
1780 	}
1781 
1782 	return 0;
1783 }
1784 
1785 /* wrapper of check_command for data size in blocks handling */
1786 static int check_command_size_in_blocks(struct fsg_common *common,
1787 		int cmnd_size, enum data_direction data_dir,
1788 		unsigned int mask, int needs_medium, const char *name)
1789 {
1790 	if (common->curlun)
1791 		common->data_size_from_cmnd <<= common->curlun->blkbits;
1792 	return check_command(common, cmnd_size, data_dir,
1793 			mask, needs_medium, name);
1794 }
1795 
1796 static int do_scsi_command(struct fsg_common *common)
1797 {
1798 	struct fsg_buffhd	*bh;
1799 	int			rc;
1800 	int			reply = -EINVAL;
1801 	int			i;
1802 	static char		unknown[16];
1803 
1804 	dump_cdb(common);
1805 
1806 	/* Wait for the next buffer to become available for data or status */
1807 	bh = common->next_buffhd_to_fill;
1808 	common->next_buffhd_to_drain = bh;
1809 	rc = sleep_thread(common, false, bh);
1810 	if (rc)
1811 		return rc;
1812 
1813 	common->phase_error = 0;
1814 	common->short_packet_received = 0;
1815 
1816 	down_read(&common->filesem);	/* We're using the backing file */
1817 	switch (common->cmnd[0]) {
1818 
1819 	case INQUIRY:
1820 		common->data_size_from_cmnd = common->cmnd[4];
1821 		reply = check_command(common, 6, DATA_DIR_TO_HOST,
1822 				      (1<<4), 0,
1823 				      "INQUIRY");
1824 		if (reply == 0)
1825 			reply = do_inquiry(common, bh);
1826 		break;
1827 
1828 	case MODE_SELECT:
1829 		common->data_size_from_cmnd = common->cmnd[4];
1830 		reply = check_command(common, 6, DATA_DIR_FROM_HOST,
1831 				      (1<<1) | (1<<4), 0,
1832 				      "MODE SELECT(6)");
1833 		if (reply == 0)
1834 			reply = do_mode_select(common, bh);
1835 		break;
1836 
1837 	case MODE_SELECT_10:
1838 		common->data_size_from_cmnd =
1839 			get_unaligned_be16(&common->cmnd[7]);
1840 		reply = check_command(common, 10, DATA_DIR_FROM_HOST,
1841 				      (1<<1) | (3<<7), 0,
1842 				      "MODE SELECT(10)");
1843 		if (reply == 0)
1844 			reply = do_mode_select(common, bh);
1845 		break;
1846 
1847 	case MODE_SENSE:
1848 		common->data_size_from_cmnd = common->cmnd[4];
1849 		reply = check_command(common, 6, DATA_DIR_TO_HOST,
1850 				      (1<<1) | (1<<2) | (1<<4), 0,
1851 				      "MODE SENSE(6)");
1852 		if (reply == 0)
1853 			reply = do_mode_sense(common, bh);
1854 		break;
1855 
1856 	case MODE_SENSE_10:
1857 		common->data_size_from_cmnd =
1858 			get_unaligned_be16(&common->cmnd[7]);
1859 		reply = check_command(common, 10, DATA_DIR_TO_HOST,
1860 				      (1<<1) | (1<<2) | (3<<7), 0,
1861 				      "MODE SENSE(10)");
1862 		if (reply == 0)
1863 			reply = do_mode_sense(common, bh);
1864 		break;
1865 
1866 	case ALLOW_MEDIUM_REMOVAL:
1867 		common->data_size_from_cmnd = 0;
1868 		reply = check_command(common, 6, DATA_DIR_NONE,
1869 				      (1<<4), 0,
1870 				      "PREVENT-ALLOW MEDIUM REMOVAL");
1871 		if (reply == 0)
1872 			reply = do_prevent_allow(common);
1873 		break;
1874 
1875 	case READ_6:
1876 		i = common->cmnd[4];
1877 		common->data_size_from_cmnd = (i == 0) ? 256 : i;
1878 		reply = check_command_size_in_blocks(common, 6,
1879 				      DATA_DIR_TO_HOST,
1880 				      (7<<1) | (1<<4), 1,
1881 				      "READ(6)");
1882 		if (reply == 0)
1883 			reply = do_read(common);
1884 		break;
1885 
1886 	case READ_10:
1887 		common->data_size_from_cmnd =
1888 				get_unaligned_be16(&common->cmnd[7]);
1889 		reply = check_command_size_in_blocks(common, 10,
1890 				      DATA_DIR_TO_HOST,
1891 				      (1<<1) | (0xf<<2) | (3<<7), 1,
1892 				      "READ(10)");
1893 		if (reply == 0)
1894 			reply = do_read(common);
1895 		break;
1896 
1897 	case READ_12:
1898 		common->data_size_from_cmnd =
1899 				get_unaligned_be32(&common->cmnd[6]);
1900 		reply = check_command_size_in_blocks(common, 12,
1901 				      DATA_DIR_TO_HOST,
1902 				      (1<<1) | (0xf<<2) | (0xf<<6), 1,
1903 				      "READ(12)");
1904 		if (reply == 0)
1905 			reply = do_read(common);
1906 		break;
1907 
1908 	case READ_CAPACITY:
1909 		common->data_size_from_cmnd = 8;
1910 		reply = check_command(common, 10, DATA_DIR_TO_HOST,
1911 				      (0xf<<2) | (1<<8), 1,
1912 				      "READ CAPACITY");
1913 		if (reply == 0)
1914 			reply = do_read_capacity(common, bh);
1915 		break;
1916 
1917 	case READ_HEADER:
1918 		if (!common->curlun || !common->curlun->cdrom)
1919 			goto unknown_cmnd;
1920 		common->data_size_from_cmnd =
1921 			get_unaligned_be16(&common->cmnd[7]);
1922 		reply = check_command(common, 10, DATA_DIR_TO_HOST,
1923 				      (3<<7) | (0x1f<<1), 1,
1924 				      "READ HEADER");
1925 		if (reply == 0)
1926 			reply = do_read_header(common, bh);
1927 		break;
1928 
1929 	case READ_TOC:
1930 		if (!common->curlun || !common->curlun->cdrom)
1931 			goto unknown_cmnd;
1932 		common->data_size_from_cmnd =
1933 			get_unaligned_be16(&common->cmnd[7]);
1934 		reply = check_command(common, 10, DATA_DIR_TO_HOST,
1935 				      (7<<6) | (1<<1), 1,
1936 				      "READ TOC");
1937 		if (reply == 0)
1938 			reply = do_read_toc(common, bh);
1939 		break;
1940 
1941 	case READ_FORMAT_CAPACITIES:
1942 		common->data_size_from_cmnd =
1943 			get_unaligned_be16(&common->cmnd[7]);
1944 		reply = check_command(common, 10, DATA_DIR_TO_HOST,
1945 				      (3<<7), 1,
1946 				      "READ FORMAT CAPACITIES");
1947 		if (reply == 0)
1948 			reply = do_read_format_capacities(common, bh);
1949 		break;
1950 
1951 	case REQUEST_SENSE:
1952 		common->data_size_from_cmnd = common->cmnd[4];
1953 		reply = check_command(common, 6, DATA_DIR_TO_HOST,
1954 				      (1<<4), 0,
1955 				      "REQUEST SENSE");
1956 		if (reply == 0)
1957 			reply = do_request_sense(common, bh);
1958 		break;
1959 
1960 	case START_STOP:
1961 		common->data_size_from_cmnd = 0;
1962 		reply = check_command(common, 6, DATA_DIR_NONE,
1963 				      (1<<1) | (1<<4), 0,
1964 				      "START-STOP UNIT");
1965 		if (reply == 0)
1966 			reply = do_start_stop(common);
1967 		break;
1968 
1969 	case SYNCHRONIZE_CACHE:
1970 		common->data_size_from_cmnd = 0;
1971 		reply = check_command(common, 10, DATA_DIR_NONE,
1972 				      (0xf<<2) | (3<<7), 1,
1973 				      "SYNCHRONIZE CACHE");
1974 		if (reply == 0)
1975 			reply = do_synchronize_cache(common);
1976 		break;
1977 
1978 	case TEST_UNIT_READY:
1979 		common->data_size_from_cmnd = 0;
1980 		reply = check_command(common, 6, DATA_DIR_NONE,
1981 				0, 1,
1982 				"TEST UNIT READY");
1983 		break;
1984 
1985 	/*
1986 	 * Although optional, this command is used by MS-Windows.  We
1987 	 * support a minimal version: BytChk must be 0.
1988 	 */
1989 	case VERIFY:
1990 		common->data_size_from_cmnd = 0;
1991 		reply = check_command(common, 10, DATA_DIR_NONE,
1992 				      (1<<1) | (0xf<<2) | (3<<7), 1,
1993 				      "VERIFY");
1994 		if (reply == 0)
1995 			reply = do_verify(common);
1996 		break;
1997 
1998 	case WRITE_6:
1999 		i = common->cmnd[4];
2000 		common->data_size_from_cmnd = (i == 0) ? 256 : i;
2001 		reply = check_command_size_in_blocks(common, 6,
2002 				      DATA_DIR_FROM_HOST,
2003 				      (7<<1) | (1<<4), 1,
2004 				      "WRITE(6)");
2005 		if (reply == 0)
2006 			reply = do_write(common);
2007 		break;
2008 
2009 	case WRITE_10:
2010 		common->data_size_from_cmnd =
2011 				get_unaligned_be16(&common->cmnd[7]);
2012 		reply = check_command_size_in_blocks(common, 10,
2013 				      DATA_DIR_FROM_HOST,
2014 				      (1<<1) | (0xf<<2) | (3<<7), 1,
2015 				      "WRITE(10)");
2016 		if (reply == 0)
2017 			reply = do_write(common);
2018 		break;
2019 
2020 	case WRITE_12:
2021 		common->data_size_from_cmnd =
2022 				get_unaligned_be32(&common->cmnd[6]);
2023 		reply = check_command_size_in_blocks(common, 12,
2024 				      DATA_DIR_FROM_HOST,
2025 				      (1<<1) | (0xf<<2) | (0xf<<6), 1,
2026 				      "WRITE(12)");
2027 		if (reply == 0)
2028 			reply = do_write(common);
2029 		break;
2030 
2031 	/*
2032 	 * Some mandatory commands that we recognize but don't implement.
2033 	 * They don't mean much in this setting.  It's left as an exercise
2034 	 * for anyone interested to implement RESERVE and RELEASE in terms
2035 	 * of Posix locks.
2036 	 */
2037 	case FORMAT_UNIT:
2038 	case RELEASE:
2039 	case RESERVE:
2040 	case SEND_DIAGNOSTIC:
2041 		/* Fall through */
2042 
2043 	default:
2044 unknown_cmnd:
2045 		common->data_size_from_cmnd = 0;
2046 		sprintf(unknown, "Unknown x%02x", common->cmnd[0]);
2047 		reply = check_command(common, common->cmnd_size,
2048 				      DATA_DIR_UNKNOWN, ~0, 0, unknown);
2049 		if (reply == 0) {
2050 			common->curlun->sense_data = SS_INVALID_COMMAND;
2051 			reply = -EINVAL;
2052 		}
2053 		break;
2054 	}
2055 	up_read(&common->filesem);
2056 
2057 	if (reply == -EINTR || signal_pending(current))
2058 		return -EINTR;
2059 
2060 	/* Set up the single reply buffer for finish_reply() */
2061 	if (reply == -EINVAL)
2062 		reply = 0;		/* Error reply length */
2063 	if (reply >= 0 && common->data_dir == DATA_DIR_TO_HOST) {
2064 		reply = min((u32)reply, common->data_size_from_cmnd);
2065 		bh->inreq->length = reply;
2066 		bh->state = BUF_STATE_FULL;
2067 		common->residue -= reply;
2068 	}				/* Otherwise it's already set */
2069 
2070 	return 0;
2071 }
2072 
2073 
2074 /*-------------------------------------------------------------------------*/
2075 
2076 static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
2077 {
2078 	struct usb_request	*req = bh->outreq;
2079 	struct bulk_cb_wrap	*cbw = req->buf;
2080 	struct fsg_common	*common = fsg->common;
2081 
2082 	/* Was this a real packet?  Should it be ignored? */
2083 	if (req->status || test_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags))
2084 		return -EINVAL;
2085 
2086 	/* Is the CBW valid? */
2087 	if (req->actual != US_BULK_CB_WRAP_LEN ||
2088 			cbw->Signature != cpu_to_le32(
2089 				US_BULK_CB_SIGN)) {
2090 		DBG(fsg, "invalid CBW: len %u sig 0x%x\n",
2091 				req->actual,
2092 				le32_to_cpu(cbw->Signature));
2093 
2094 		/*
2095 		 * The Bulk-only spec says we MUST stall the IN endpoint
2096 		 * (6.6.1), so it's unavoidable.  It also says we must
2097 		 * retain this state until the next reset, but there's
2098 		 * no way to tell the controller driver it should ignore
2099 		 * Clear-Feature(HALT) requests.
2100 		 *
2101 		 * We aren't required to halt the OUT endpoint; instead
2102 		 * we can simply accept and discard any data received
2103 		 * until the next reset.
2104 		 */
2105 		wedge_bulk_in_endpoint(fsg);
2106 		set_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
2107 		return -EINVAL;
2108 	}
2109 
2110 	/* Is the CBW meaningful? */
2111 	if (cbw->Lun >= ARRAY_SIZE(common->luns) ||
2112 	    cbw->Flags & ~US_BULK_FLAG_IN || cbw->Length <= 0 ||
2113 	    cbw->Length > MAX_COMMAND_SIZE) {
2114 		DBG(fsg, "non-meaningful CBW: lun = %u, flags = 0x%x, "
2115 				"cmdlen %u\n",
2116 				cbw->Lun, cbw->Flags, cbw->Length);
2117 
2118 		/*
2119 		 * We can do anything we want here, so let's stall the
2120 		 * bulk pipes if we are allowed to.
2121 		 */
2122 		if (common->can_stall) {
2123 			fsg_set_halt(fsg, fsg->bulk_out);
2124 			halt_bulk_in_endpoint(fsg);
2125 		}
2126 		return -EINVAL;
2127 	}
2128 
2129 	/* Save the command for later */
2130 	common->cmnd_size = cbw->Length;
2131 	memcpy(common->cmnd, cbw->CDB, common->cmnd_size);
2132 	if (cbw->Flags & US_BULK_FLAG_IN)
2133 		common->data_dir = DATA_DIR_TO_HOST;
2134 	else
2135 		common->data_dir = DATA_DIR_FROM_HOST;
2136 	common->data_size = le32_to_cpu(cbw->DataTransferLength);
2137 	if (common->data_size == 0)
2138 		common->data_dir = DATA_DIR_NONE;
2139 	common->lun = cbw->Lun;
2140 	if (common->lun < ARRAY_SIZE(common->luns))
2141 		common->curlun = common->luns[common->lun];
2142 	else
2143 		common->curlun = NULL;
2144 	common->tag = cbw->Tag;
2145 	return 0;
2146 }
2147 
2148 static int get_next_command(struct fsg_common *common)
2149 {
2150 	struct fsg_buffhd	*bh;
2151 	int			rc = 0;
2152 
2153 	/* Wait for the next buffer to become available */
2154 	bh = common->next_buffhd_to_fill;
2155 	rc = sleep_thread(common, true, bh);
2156 	if (rc)
2157 		return rc;
2158 
2159 	/* Queue a request to read a Bulk-only CBW */
2160 	set_bulk_out_req_length(common, bh, US_BULK_CB_WRAP_LEN);
2161 	if (!start_out_transfer(common, bh))
2162 		/* Don't know what to do if common->fsg is NULL */
2163 		return -EIO;
2164 
2165 	/*
2166 	 * We will drain the buffer in software, which means we
2167 	 * can reuse it for the next filling.  No need to advance
2168 	 * next_buffhd_to_fill.
2169 	 */
2170 
2171 	/* Wait for the CBW to arrive */
2172 	rc = sleep_thread(common, true, bh);
2173 	if (rc)
2174 		return rc;
2175 
2176 	rc = fsg_is_set(common) ? received_cbw(common->fsg, bh) : -EIO;
2177 	bh->state = BUF_STATE_EMPTY;
2178 
2179 	return rc;
2180 }
2181 
2182 
2183 /*-------------------------------------------------------------------------*/
2184 
2185 static int alloc_request(struct fsg_common *common, struct usb_ep *ep,
2186 		struct usb_request **preq)
2187 {
2188 	*preq = usb_ep_alloc_request(ep, GFP_ATOMIC);
2189 	if (*preq)
2190 		return 0;
2191 	ERROR(common, "can't allocate request for %s\n", ep->name);
2192 	return -ENOMEM;
2193 }
2194 
2195 /* Reset interface setting and re-init endpoint state (toggle etc). */
2196 static int do_set_interface(struct fsg_common *common, struct fsg_dev *new_fsg)
2197 {
2198 	struct fsg_dev *fsg;
2199 	int i, rc = 0;
2200 
2201 	if (common->running)
2202 		DBG(common, "reset interface\n");
2203 
2204 reset:
2205 	/* Deallocate the requests */
2206 	if (common->fsg) {
2207 		fsg = common->fsg;
2208 
2209 		for (i = 0; i < common->fsg_num_buffers; ++i) {
2210 			struct fsg_buffhd *bh = &common->buffhds[i];
2211 
2212 			if (bh->inreq) {
2213 				usb_ep_free_request(fsg->bulk_in, bh->inreq);
2214 				bh->inreq = NULL;
2215 			}
2216 			if (bh->outreq) {
2217 				usb_ep_free_request(fsg->bulk_out, bh->outreq);
2218 				bh->outreq = NULL;
2219 			}
2220 		}
2221 
2222 		/* Disable the endpoints */
2223 		if (fsg->bulk_in_enabled) {
2224 			usb_ep_disable(fsg->bulk_in);
2225 			fsg->bulk_in_enabled = 0;
2226 		}
2227 		if (fsg->bulk_out_enabled) {
2228 			usb_ep_disable(fsg->bulk_out);
2229 			fsg->bulk_out_enabled = 0;
2230 		}
2231 
2232 		common->fsg = NULL;
2233 		wake_up(&common->fsg_wait);
2234 	}
2235 
2236 	common->running = 0;
2237 	if (!new_fsg || rc)
2238 		return rc;
2239 
2240 	common->fsg = new_fsg;
2241 	fsg = common->fsg;
2242 
2243 	/* Enable the endpoints */
2244 	rc = config_ep_by_speed(common->gadget, &(fsg->function), fsg->bulk_in);
2245 	if (rc)
2246 		goto reset;
2247 	rc = usb_ep_enable(fsg->bulk_in);
2248 	if (rc)
2249 		goto reset;
2250 	fsg->bulk_in->driver_data = common;
2251 	fsg->bulk_in_enabled = 1;
2252 
2253 	rc = config_ep_by_speed(common->gadget, &(fsg->function),
2254 				fsg->bulk_out);
2255 	if (rc)
2256 		goto reset;
2257 	rc = usb_ep_enable(fsg->bulk_out);
2258 	if (rc)
2259 		goto reset;
2260 	fsg->bulk_out->driver_data = common;
2261 	fsg->bulk_out_enabled = 1;
2262 	common->bulk_out_maxpacket = usb_endpoint_maxp(fsg->bulk_out->desc);
2263 	clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
2264 
2265 	/* Allocate the requests */
2266 	for (i = 0; i < common->fsg_num_buffers; ++i) {
2267 		struct fsg_buffhd	*bh = &common->buffhds[i];
2268 
2269 		rc = alloc_request(common, fsg->bulk_in, &bh->inreq);
2270 		if (rc)
2271 			goto reset;
2272 		rc = alloc_request(common, fsg->bulk_out, &bh->outreq);
2273 		if (rc)
2274 			goto reset;
2275 		bh->inreq->buf = bh->outreq->buf = bh->buf;
2276 		bh->inreq->context = bh->outreq->context = bh;
2277 		bh->inreq->complete = bulk_in_complete;
2278 		bh->outreq->complete = bulk_out_complete;
2279 	}
2280 
2281 	common->running = 1;
2282 	for (i = 0; i < ARRAY_SIZE(common->luns); ++i)
2283 		if (common->luns[i])
2284 			common->luns[i]->unit_attention_data =
2285 				SS_RESET_OCCURRED;
2286 	return rc;
2287 }
2288 
2289 
2290 /****************************** ALT CONFIGS ******************************/
2291 
2292 static int fsg_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
2293 {
2294 	struct fsg_dev *fsg = fsg_from_func(f);
2295 
2296 	__raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE, fsg);
2297 	return USB_GADGET_DELAYED_STATUS;
2298 }
2299 
2300 static void fsg_disable(struct usb_function *f)
2301 {
2302 	struct fsg_dev *fsg = fsg_from_func(f);
2303 
2304 	__raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE, NULL);
2305 }
2306 
2307 
2308 /*-------------------------------------------------------------------------*/
2309 
2310 static void handle_exception(struct fsg_common *common)
2311 {
2312 	int			i;
2313 	struct fsg_buffhd	*bh;
2314 	enum fsg_state		old_state;
2315 	struct fsg_lun		*curlun;
2316 	unsigned int		exception_req_tag;
2317 	struct fsg_dev		*new_fsg;
2318 
2319 	/*
2320 	 * Clear the existing signals.  Anything but SIGUSR1 is converted
2321 	 * into a high-priority EXIT exception.
2322 	 */
2323 	for (;;) {
2324 		int sig = kernel_dequeue_signal();
2325 		if (!sig)
2326 			break;
2327 		if (sig != SIGUSR1) {
2328 			spin_lock_irq(&common->lock);
2329 			if (common->state < FSG_STATE_EXIT)
2330 				DBG(common, "Main thread exiting on signal\n");
2331 			common->state = FSG_STATE_EXIT;
2332 			spin_unlock_irq(&common->lock);
2333 		}
2334 	}
2335 
2336 	/* Cancel all the pending transfers */
2337 	if (likely(common->fsg)) {
2338 		for (i = 0; i < common->fsg_num_buffers; ++i) {
2339 			bh = &common->buffhds[i];
2340 			if (bh->state == BUF_STATE_SENDING)
2341 				usb_ep_dequeue(common->fsg->bulk_in, bh->inreq);
2342 			if (bh->state == BUF_STATE_RECEIVING)
2343 				usb_ep_dequeue(common->fsg->bulk_out,
2344 					       bh->outreq);
2345 
2346 			/* Wait for a transfer to become idle */
2347 			if (sleep_thread(common, false, bh))
2348 				return;
2349 		}
2350 
2351 		/* Clear out the controller's fifos */
2352 		if (common->fsg->bulk_in_enabled)
2353 			usb_ep_fifo_flush(common->fsg->bulk_in);
2354 		if (common->fsg->bulk_out_enabled)
2355 			usb_ep_fifo_flush(common->fsg->bulk_out);
2356 	}
2357 
2358 	/*
2359 	 * Reset the I/O buffer states and pointers, the SCSI
2360 	 * state, and the exception.  Then invoke the handler.
2361 	 */
2362 	spin_lock_irq(&common->lock);
2363 
2364 	for (i = 0; i < common->fsg_num_buffers; ++i) {
2365 		bh = &common->buffhds[i];
2366 		bh->state = BUF_STATE_EMPTY;
2367 	}
2368 	common->next_buffhd_to_fill = &common->buffhds[0];
2369 	common->next_buffhd_to_drain = &common->buffhds[0];
2370 	exception_req_tag = common->exception_req_tag;
2371 	new_fsg = common->exception_arg;
2372 	old_state = common->state;
2373 	common->state = FSG_STATE_NORMAL;
2374 
2375 	if (old_state != FSG_STATE_ABORT_BULK_OUT) {
2376 		for (i = 0; i < ARRAY_SIZE(common->luns); ++i) {
2377 			curlun = common->luns[i];
2378 			if (!curlun)
2379 				continue;
2380 			curlun->prevent_medium_removal = 0;
2381 			curlun->sense_data = SS_NO_SENSE;
2382 			curlun->unit_attention_data = SS_NO_SENSE;
2383 			curlun->sense_data_info = 0;
2384 			curlun->info_valid = 0;
2385 		}
2386 	}
2387 	spin_unlock_irq(&common->lock);
2388 
2389 	/* Carry out any extra actions required for the exception */
2390 	switch (old_state) {
2391 	case FSG_STATE_NORMAL:
2392 		break;
2393 
2394 	case FSG_STATE_ABORT_BULK_OUT:
2395 		send_status(common);
2396 		break;
2397 
2398 	case FSG_STATE_PROTOCOL_RESET:
2399 		/*
2400 		 * In case we were forced against our will to halt a
2401 		 * bulk endpoint, clear the halt now.  (The SuperH UDC
2402 		 * requires this.)
2403 		 */
2404 		if (!fsg_is_set(common))
2405 			break;
2406 		if (test_and_clear_bit(IGNORE_BULK_OUT,
2407 				       &common->fsg->atomic_bitflags))
2408 			usb_ep_clear_halt(common->fsg->bulk_in);
2409 
2410 		if (common->ep0_req_tag == exception_req_tag)
2411 			ep0_queue(common);	/* Complete the status stage */
2412 
2413 		/*
2414 		 * Technically this should go here, but it would only be
2415 		 * a waste of time.  Ditto for the INTERFACE_CHANGE and
2416 		 * CONFIG_CHANGE cases.
2417 		 */
2418 		/* for (i = 0; i < common->ARRAY_SIZE(common->luns); ++i) */
2419 		/*	if (common->luns[i]) */
2420 		/*		common->luns[i]->unit_attention_data = */
2421 		/*			SS_RESET_OCCURRED;  */
2422 		break;
2423 
2424 	case FSG_STATE_CONFIG_CHANGE:
2425 		do_set_interface(common, new_fsg);
2426 		if (new_fsg)
2427 			usb_composite_setup_continue(common->cdev);
2428 		break;
2429 
2430 	case FSG_STATE_EXIT:
2431 		do_set_interface(common, NULL);		/* Free resources */
2432 		spin_lock_irq(&common->lock);
2433 		common->state = FSG_STATE_TERMINATED;	/* Stop the thread */
2434 		spin_unlock_irq(&common->lock);
2435 		break;
2436 
2437 	case FSG_STATE_TERMINATED:
2438 		break;
2439 	}
2440 }
2441 
2442 
2443 /*-------------------------------------------------------------------------*/
2444 
2445 static int fsg_main_thread(void *common_)
2446 {
2447 	struct fsg_common	*common = common_;
2448 	int			i;
2449 
2450 	/*
2451 	 * Allow the thread to be killed by a signal, but set the signal mask
2452 	 * to block everything but INT, TERM, KILL, and USR1.
2453 	 */
2454 	allow_signal(SIGINT);
2455 	allow_signal(SIGTERM);
2456 	allow_signal(SIGKILL);
2457 	allow_signal(SIGUSR1);
2458 
2459 	/* Allow the thread to be frozen */
2460 	set_freezable();
2461 
2462 	/* The main loop */
2463 	while (common->state != FSG_STATE_TERMINATED) {
2464 		if (exception_in_progress(common) || signal_pending(current)) {
2465 			handle_exception(common);
2466 			continue;
2467 		}
2468 
2469 		if (!common->running) {
2470 			sleep_thread(common, true, NULL);
2471 			continue;
2472 		}
2473 
2474 		if (get_next_command(common) || exception_in_progress(common))
2475 			continue;
2476 		if (do_scsi_command(common) || exception_in_progress(common))
2477 			continue;
2478 		if (finish_reply(common) || exception_in_progress(common))
2479 			continue;
2480 		send_status(common);
2481 	}
2482 
2483 	spin_lock_irq(&common->lock);
2484 	common->thread_task = NULL;
2485 	spin_unlock_irq(&common->lock);
2486 
2487 	/* Eject media from all LUNs */
2488 
2489 	down_write(&common->filesem);
2490 	for (i = 0; i < ARRAY_SIZE(common->luns); i++) {
2491 		struct fsg_lun *curlun = common->luns[i];
2492 
2493 		if (curlun && fsg_lun_is_open(curlun))
2494 			fsg_lun_close(curlun);
2495 	}
2496 	up_write(&common->filesem);
2497 
2498 	/* Let fsg_unbind() know the thread has exited */
2499 	complete_and_exit(&common->thread_notifier, 0);
2500 }
2501 
2502 
2503 /*************************** DEVICE ATTRIBUTES ***************************/
2504 
2505 static ssize_t ro_show(struct device *dev, struct device_attribute *attr, char *buf)
2506 {
2507 	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
2508 
2509 	return fsg_show_ro(curlun, buf);
2510 }
2511 
2512 static ssize_t nofua_show(struct device *dev, struct device_attribute *attr,
2513 			  char *buf)
2514 {
2515 	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
2516 
2517 	return fsg_show_nofua(curlun, buf);
2518 }
2519 
2520 static ssize_t file_show(struct device *dev, struct device_attribute *attr,
2521 			 char *buf)
2522 {
2523 	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
2524 	struct rw_semaphore	*filesem = dev_get_drvdata(dev);
2525 
2526 	return fsg_show_file(curlun, filesem, buf);
2527 }
2528 
2529 static ssize_t ro_store(struct device *dev, struct device_attribute *attr,
2530 			const char *buf, size_t count)
2531 {
2532 	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
2533 	struct rw_semaphore	*filesem = dev_get_drvdata(dev);
2534 
2535 	return fsg_store_ro(curlun, filesem, buf, count);
2536 }
2537 
2538 static ssize_t nofua_store(struct device *dev, struct device_attribute *attr,
2539 			   const char *buf, size_t count)
2540 {
2541 	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
2542 
2543 	return fsg_store_nofua(curlun, buf, count);
2544 }
2545 
2546 static ssize_t file_store(struct device *dev, struct device_attribute *attr,
2547 			  const char *buf, size_t count)
2548 {
2549 	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
2550 	struct rw_semaphore	*filesem = dev_get_drvdata(dev);
2551 
2552 	return fsg_store_file(curlun, filesem, buf, count);
2553 }
2554 
2555 static DEVICE_ATTR_RW(nofua);
2556 /* mode wil be set in fsg_lun_attr_is_visible() */
2557 static DEVICE_ATTR(ro, 0, ro_show, ro_store);
2558 static DEVICE_ATTR(file, 0, file_show, file_store);
2559 
2560 /****************************** FSG COMMON ******************************/
2561 
2562 static void fsg_lun_release(struct device *dev)
2563 {
2564 	/* Nothing needs to be done */
2565 }
2566 
2567 static struct fsg_common *fsg_common_setup(struct fsg_common *common)
2568 {
2569 	if (!common) {
2570 		common = kzalloc(sizeof(*common), GFP_KERNEL);
2571 		if (!common)
2572 			return ERR_PTR(-ENOMEM);
2573 		common->free_storage_on_release = 1;
2574 	} else {
2575 		common->free_storage_on_release = 0;
2576 	}
2577 	init_rwsem(&common->filesem);
2578 	spin_lock_init(&common->lock);
2579 	init_completion(&common->thread_notifier);
2580 	init_waitqueue_head(&common->io_wait);
2581 	init_waitqueue_head(&common->fsg_wait);
2582 	common->state = FSG_STATE_TERMINATED;
2583 	memset(common->luns, 0, sizeof(common->luns));
2584 
2585 	return common;
2586 }
2587 
2588 void fsg_common_set_sysfs(struct fsg_common *common, bool sysfs)
2589 {
2590 	common->sysfs = sysfs;
2591 }
2592 EXPORT_SYMBOL_GPL(fsg_common_set_sysfs);
2593 
2594 static void _fsg_common_free_buffers(struct fsg_buffhd *buffhds, unsigned n)
2595 {
2596 	if (buffhds) {
2597 		struct fsg_buffhd *bh = buffhds;
2598 		while (n--) {
2599 			kfree(bh->buf);
2600 			++bh;
2601 		}
2602 		kfree(buffhds);
2603 	}
2604 }
2605 
2606 int fsg_common_set_num_buffers(struct fsg_common *common, unsigned int n)
2607 {
2608 	struct fsg_buffhd *bh, *buffhds;
2609 	int i;
2610 
2611 	buffhds = kcalloc(n, sizeof(*buffhds), GFP_KERNEL);
2612 	if (!buffhds)
2613 		return -ENOMEM;
2614 
2615 	/* Data buffers cyclic list */
2616 	bh = buffhds;
2617 	i = n;
2618 	goto buffhds_first_it;
2619 	do {
2620 		bh->next = bh + 1;
2621 		++bh;
2622 buffhds_first_it:
2623 		bh->buf = kmalloc(FSG_BUFLEN, GFP_KERNEL);
2624 		if (unlikely(!bh->buf))
2625 			goto error_release;
2626 	} while (--i);
2627 	bh->next = buffhds;
2628 
2629 	_fsg_common_free_buffers(common->buffhds, common->fsg_num_buffers);
2630 	common->fsg_num_buffers = n;
2631 	common->buffhds = buffhds;
2632 
2633 	return 0;
2634 
2635 error_release:
2636 	/*
2637 	 * "buf"s pointed to by heads after n - i are NULL
2638 	 * so releasing them won't hurt
2639 	 */
2640 	_fsg_common_free_buffers(buffhds, n);
2641 
2642 	return -ENOMEM;
2643 }
2644 EXPORT_SYMBOL_GPL(fsg_common_set_num_buffers);
2645 
2646 void fsg_common_remove_lun(struct fsg_lun *lun)
2647 {
2648 	if (device_is_registered(&lun->dev))
2649 		device_unregister(&lun->dev);
2650 	fsg_lun_close(lun);
2651 	kfree(lun);
2652 }
2653 EXPORT_SYMBOL_GPL(fsg_common_remove_lun);
2654 
2655 static void _fsg_common_remove_luns(struct fsg_common *common, int n)
2656 {
2657 	int i;
2658 
2659 	for (i = 0; i < n; ++i)
2660 		if (common->luns[i]) {
2661 			fsg_common_remove_lun(common->luns[i]);
2662 			common->luns[i] = NULL;
2663 		}
2664 }
2665 
2666 void fsg_common_remove_luns(struct fsg_common *common)
2667 {
2668 	_fsg_common_remove_luns(common, ARRAY_SIZE(common->luns));
2669 }
2670 EXPORT_SYMBOL_GPL(fsg_common_remove_luns);
2671 
2672 void fsg_common_free_buffers(struct fsg_common *common)
2673 {
2674 	_fsg_common_free_buffers(common->buffhds, common->fsg_num_buffers);
2675 	common->buffhds = NULL;
2676 }
2677 EXPORT_SYMBOL_GPL(fsg_common_free_buffers);
2678 
2679 int fsg_common_set_cdev(struct fsg_common *common,
2680 			 struct usb_composite_dev *cdev, bool can_stall)
2681 {
2682 	struct usb_string *us;
2683 
2684 	common->gadget = cdev->gadget;
2685 	common->ep0 = cdev->gadget->ep0;
2686 	common->ep0req = cdev->req;
2687 	common->cdev = cdev;
2688 
2689 	us = usb_gstrings_attach(cdev, fsg_strings_array,
2690 				 ARRAY_SIZE(fsg_strings));
2691 	if (IS_ERR(us))
2692 		return PTR_ERR(us);
2693 
2694 	fsg_intf_desc.iInterface = us[FSG_STRING_INTERFACE].id;
2695 
2696 	/*
2697 	 * Some peripheral controllers are known not to be able to
2698 	 * halt bulk endpoints correctly.  If one of them is present,
2699 	 * disable stalls.
2700 	 */
2701 	common->can_stall = can_stall &&
2702 			gadget_is_stall_supported(common->gadget);
2703 
2704 	return 0;
2705 }
2706 EXPORT_SYMBOL_GPL(fsg_common_set_cdev);
2707 
2708 static struct attribute *fsg_lun_dev_attrs[] = {
2709 	&dev_attr_ro.attr,
2710 	&dev_attr_file.attr,
2711 	&dev_attr_nofua.attr,
2712 	NULL
2713 };
2714 
2715 static umode_t fsg_lun_dev_is_visible(struct kobject *kobj,
2716 				      struct attribute *attr, int idx)
2717 {
2718 	struct device *dev = kobj_to_dev(kobj);
2719 	struct fsg_lun *lun = fsg_lun_from_dev(dev);
2720 
2721 	if (attr == &dev_attr_ro.attr)
2722 		return lun->cdrom ? S_IRUGO : (S_IWUSR | S_IRUGO);
2723 	if (attr == &dev_attr_file.attr)
2724 		return lun->removable ? (S_IWUSR | S_IRUGO) : S_IRUGO;
2725 	return attr->mode;
2726 }
2727 
2728 static const struct attribute_group fsg_lun_dev_group = {
2729 	.attrs = fsg_lun_dev_attrs,
2730 	.is_visible = fsg_lun_dev_is_visible,
2731 };
2732 
2733 static const struct attribute_group *fsg_lun_dev_groups[] = {
2734 	&fsg_lun_dev_group,
2735 	NULL
2736 };
2737 
2738 int fsg_common_create_lun(struct fsg_common *common, struct fsg_lun_config *cfg,
2739 			  unsigned int id, const char *name,
2740 			  const char **name_pfx)
2741 {
2742 	struct fsg_lun *lun;
2743 	char *pathbuf, *p;
2744 	int rc = -ENOMEM;
2745 
2746 	if (id >= ARRAY_SIZE(common->luns))
2747 		return -ENODEV;
2748 
2749 	if (common->luns[id])
2750 		return -EBUSY;
2751 
2752 	if (!cfg->filename && !cfg->removable) {
2753 		pr_err("no file given for LUN%d\n", id);
2754 		return -EINVAL;
2755 	}
2756 
2757 	lun = kzalloc(sizeof(*lun), GFP_KERNEL);
2758 	if (!lun)
2759 		return -ENOMEM;
2760 
2761 	lun->name_pfx = name_pfx;
2762 
2763 	lun->cdrom = !!cfg->cdrom;
2764 	lun->ro = cfg->cdrom || cfg->ro;
2765 	lun->initially_ro = lun->ro;
2766 	lun->removable = !!cfg->removable;
2767 
2768 	if (!common->sysfs) {
2769 		/* we DON'T own the name!*/
2770 		lun->name = name;
2771 	} else {
2772 		lun->dev.release = fsg_lun_release;
2773 		lun->dev.parent = &common->gadget->dev;
2774 		lun->dev.groups = fsg_lun_dev_groups;
2775 		dev_set_drvdata(&lun->dev, &common->filesem);
2776 		dev_set_name(&lun->dev, "%s", name);
2777 		lun->name = dev_name(&lun->dev);
2778 
2779 		rc = device_register(&lun->dev);
2780 		if (rc) {
2781 			pr_info("failed to register LUN%d: %d\n", id, rc);
2782 			put_device(&lun->dev);
2783 			goto error_sysfs;
2784 		}
2785 	}
2786 
2787 	common->luns[id] = lun;
2788 
2789 	if (cfg->filename) {
2790 		rc = fsg_lun_open(lun, cfg->filename);
2791 		if (rc)
2792 			goto error_lun;
2793 	}
2794 
2795 	pathbuf = kmalloc(PATH_MAX, GFP_KERNEL);
2796 	p = "(no medium)";
2797 	if (fsg_lun_is_open(lun)) {
2798 		p = "(error)";
2799 		if (pathbuf) {
2800 			p = file_path(lun->filp, pathbuf, PATH_MAX);
2801 			if (IS_ERR(p))
2802 				p = "(error)";
2803 		}
2804 	}
2805 	pr_info("LUN: %s%s%sfile: %s\n",
2806 	      lun->removable ? "removable " : "",
2807 	      lun->ro ? "read only " : "",
2808 	      lun->cdrom ? "CD-ROM " : "",
2809 	      p);
2810 	kfree(pathbuf);
2811 
2812 	return 0;
2813 
2814 error_lun:
2815 	if (device_is_registered(&lun->dev))
2816 		device_unregister(&lun->dev);
2817 	fsg_lun_close(lun);
2818 	common->luns[id] = NULL;
2819 error_sysfs:
2820 	kfree(lun);
2821 	return rc;
2822 }
2823 EXPORT_SYMBOL_GPL(fsg_common_create_lun);
2824 
2825 int fsg_common_create_luns(struct fsg_common *common, struct fsg_config *cfg)
2826 {
2827 	char buf[8]; /* enough for 100000000 different numbers, decimal */
2828 	int i, rc;
2829 
2830 	fsg_common_remove_luns(common);
2831 
2832 	for (i = 0; i < cfg->nluns; ++i) {
2833 		snprintf(buf, sizeof(buf), "lun%d", i);
2834 		rc = fsg_common_create_lun(common, &cfg->luns[i], i, buf, NULL);
2835 		if (rc)
2836 			goto fail;
2837 	}
2838 
2839 	pr_info("Number of LUNs=%d\n", cfg->nluns);
2840 
2841 	return 0;
2842 
2843 fail:
2844 	_fsg_common_remove_luns(common, i);
2845 	return rc;
2846 }
2847 EXPORT_SYMBOL_GPL(fsg_common_create_luns);
2848 
2849 void fsg_common_set_inquiry_string(struct fsg_common *common, const char *vn,
2850 				   const char *pn)
2851 {
2852 	int i;
2853 
2854 	/* Prepare inquiryString */
2855 	i = get_default_bcdDevice();
2856 	snprintf(common->inquiry_string, sizeof(common->inquiry_string),
2857 		 "%-8s%-16s%04x", vn ?: "Linux",
2858 		 /* Assume product name dependent on the first LUN */
2859 		 pn ?: ((*common->luns)->cdrom
2860 		     ? "File-CD Gadget"
2861 		     : "File-Stor Gadget"),
2862 		 i);
2863 }
2864 EXPORT_SYMBOL_GPL(fsg_common_set_inquiry_string);
2865 
2866 static void fsg_common_release(struct fsg_common *common)
2867 {
2868 	int i;
2869 
2870 	/* If the thread isn't already dead, tell it to exit now */
2871 	if (common->state != FSG_STATE_TERMINATED) {
2872 		raise_exception(common, FSG_STATE_EXIT);
2873 		wait_for_completion(&common->thread_notifier);
2874 	}
2875 
2876 	for (i = 0; i < ARRAY_SIZE(common->luns); ++i) {
2877 		struct fsg_lun *lun = common->luns[i];
2878 		if (!lun)
2879 			continue;
2880 		fsg_lun_close(lun);
2881 		if (device_is_registered(&lun->dev))
2882 			device_unregister(&lun->dev);
2883 		kfree(lun);
2884 	}
2885 
2886 	_fsg_common_free_buffers(common->buffhds, common->fsg_num_buffers);
2887 	if (common->free_storage_on_release)
2888 		kfree(common);
2889 }
2890 
2891 
2892 /*-------------------------------------------------------------------------*/
2893 
2894 static int fsg_bind(struct usb_configuration *c, struct usb_function *f)
2895 {
2896 	struct fsg_dev		*fsg = fsg_from_func(f);
2897 	struct fsg_common	*common = fsg->common;
2898 	struct usb_gadget	*gadget = c->cdev->gadget;
2899 	int			i;
2900 	struct usb_ep		*ep;
2901 	unsigned		max_burst;
2902 	int			ret;
2903 	struct fsg_opts		*opts;
2904 
2905 	/* Don't allow to bind if we don't have at least one LUN */
2906 	ret = _fsg_common_get_max_lun(common);
2907 	if (ret < 0) {
2908 		pr_err("There should be at least one LUN.\n");
2909 		return -EINVAL;
2910 	}
2911 
2912 	opts = fsg_opts_from_func_inst(f->fi);
2913 	if (!opts->no_configfs) {
2914 		ret = fsg_common_set_cdev(fsg->common, c->cdev,
2915 					  fsg->common->can_stall);
2916 		if (ret)
2917 			return ret;
2918 		fsg_common_set_inquiry_string(fsg->common, NULL, NULL);
2919 	}
2920 
2921 	if (!common->thread_task) {
2922 		common->state = FSG_STATE_NORMAL;
2923 		common->thread_task =
2924 			kthread_create(fsg_main_thread, common, "file-storage");
2925 		if (IS_ERR(common->thread_task)) {
2926 			ret = PTR_ERR(common->thread_task);
2927 			common->thread_task = NULL;
2928 			common->state = FSG_STATE_TERMINATED;
2929 			return ret;
2930 		}
2931 		DBG(common, "I/O thread pid: %d\n",
2932 		    task_pid_nr(common->thread_task));
2933 		wake_up_process(common->thread_task);
2934 	}
2935 
2936 	fsg->gadget = gadget;
2937 
2938 	/* New interface */
2939 	i = usb_interface_id(c, f);
2940 	if (i < 0)
2941 		goto fail;
2942 	fsg_intf_desc.bInterfaceNumber = i;
2943 	fsg->interface_number = i;
2944 
2945 	/* Find all the endpoints we will use */
2946 	ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_in_desc);
2947 	if (!ep)
2948 		goto autoconf_fail;
2949 	fsg->bulk_in = ep;
2950 
2951 	ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_out_desc);
2952 	if (!ep)
2953 		goto autoconf_fail;
2954 	fsg->bulk_out = ep;
2955 
2956 	/* Assume endpoint addresses are the same for both speeds */
2957 	fsg_hs_bulk_in_desc.bEndpointAddress =
2958 		fsg_fs_bulk_in_desc.bEndpointAddress;
2959 	fsg_hs_bulk_out_desc.bEndpointAddress =
2960 		fsg_fs_bulk_out_desc.bEndpointAddress;
2961 
2962 	/* Calculate bMaxBurst, we know packet size is 1024 */
2963 	max_burst = min_t(unsigned, FSG_BUFLEN / 1024, 15);
2964 
2965 	fsg_ss_bulk_in_desc.bEndpointAddress =
2966 		fsg_fs_bulk_in_desc.bEndpointAddress;
2967 	fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst;
2968 
2969 	fsg_ss_bulk_out_desc.bEndpointAddress =
2970 		fsg_fs_bulk_out_desc.bEndpointAddress;
2971 	fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst;
2972 
2973 	ret = usb_assign_descriptors(f, fsg_fs_function, fsg_hs_function,
2974 			fsg_ss_function, fsg_ss_function);
2975 	if (ret)
2976 		goto autoconf_fail;
2977 
2978 	return 0;
2979 
2980 autoconf_fail:
2981 	ERROR(fsg, "unable to autoconfigure all endpoints\n");
2982 	i = -ENOTSUPP;
2983 fail:
2984 	/* terminate the thread */
2985 	if (fsg->common->state != FSG_STATE_TERMINATED) {
2986 		raise_exception(fsg->common, FSG_STATE_EXIT);
2987 		wait_for_completion(&fsg->common->thread_notifier);
2988 	}
2989 	return i;
2990 }
2991 
2992 /****************************** ALLOCATE FUNCTION *************************/
2993 
2994 static void fsg_unbind(struct usb_configuration *c, struct usb_function *f)
2995 {
2996 	struct fsg_dev		*fsg = fsg_from_func(f);
2997 	struct fsg_common	*common = fsg->common;
2998 
2999 	DBG(fsg, "unbind\n");
3000 	if (fsg->common->fsg == fsg) {
3001 		__raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE, NULL);
3002 		/* FIXME: make interruptible or killable somehow? */
3003 		wait_event(common->fsg_wait, common->fsg != fsg);
3004 	}
3005 
3006 	usb_free_all_descriptors(&fsg->function);
3007 }
3008 
3009 static inline struct fsg_lun_opts *to_fsg_lun_opts(struct config_item *item)
3010 {
3011 	return container_of(to_config_group(item), struct fsg_lun_opts, group);
3012 }
3013 
3014 static inline struct fsg_opts *to_fsg_opts(struct config_item *item)
3015 {
3016 	return container_of(to_config_group(item), struct fsg_opts,
3017 			    func_inst.group);
3018 }
3019 
3020 static void fsg_lun_attr_release(struct config_item *item)
3021 {
3022 	struct fsg_lun_opts *lun_opts;
3023 
3024 	lun_opts = to_fsg_lun_opts(item);
3025 	kfree(lun_opts);
3026 }
3027 
3028 static struct configfs_item_operations fsg_lun_item_ops = {
3029 	.release		= fsg_lun_attr_release,
3030 };
3031 
3032 static ssize_t fsg_lun_opts_file_show(struct config_item *item, char *page)
3033 {
3034 	struct fsg_lun_opts *opts = to_fsg_lun_opts(item);
3035 	struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent);
3036 
3037 	return fsg_show_file(opts->lun, &fsg_opts->common->filesem, page);
3038 }
3039 
3040 static ssize_t fsg_lun_opts_file_store(struct config_item *item,
3041 				       const char *page, size_t len)
3042 {
3043 	struct fsg_lun_opts *opts = to_fsg_lun_opts(item);
3044 	struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent);
3045 
3046 	return fsg_store_file(opts->lun, &fsg_opts->common->filesem, page, len);
3047 }
3048 
3049 CONFIGFS_ATTR(fsg_lun_opts_, file);
3050 
3051 static ssize_t fsg_lun_opts_ro_show(struct config_item *item, char *page)
3052 {
3053 	return fsg_show_ro(to_fsg_lun_opts(item)->lun, page);
3054 }
3055 
3056 static ssize_t fsg_lun_opts_ro_store(struct config_item *item,
3057 				       const char *page, size_t len)
3058 {
3059 	struct fsg_lun_opts *opts = to_fsg_lun_opts(item);
3060 	struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent);
3061 
3062 	return fsg_store_ro(opts->lun, &fsg_opts->common->filesem, page, len);
3063 }
3064 
3065 CONFIGFS_ATTR(fsg_lun_opts_, ro);
3066 
3067 static ssize_t fsg_lun_opts_removable_show(struct config_item *item,
3068 					   char *page)
3069 {
3070 	return fsg_show_removable(to_fsg_lun_opts(item)->lun, page);
3071 }
3072 
3073 static ssize_t fsg_lun_opts_removable_store(struct config_item *item,
3074 				       const char *page, size_t len)
3075 {
3076 	return fsg_store_removable(to_fsg_lun_opts(item)->lun, page, len);
3077 }
3078 
3079 CONFIGFS_ATTR(fsg_lun_opts_, removable);
3080 
3081 static ssize_t fsg_lun_opts_cdrom_show(struct config_item *item, char *page)
3082 {
3083 	return fsg_show_cdrom(to_fsg_lun_opts(item)->lun, page);
3084 }
3085 
3086 static ssize_t fsg_lun_opts_cdrom_store(struct config_item *item,
3087 				       const char *page, size_t len)
3088 {
3089 	struct fsg_lun_opts *opts = to_fsg_lun_opts(item);
3090 	struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent);
3091 
3092 	return fsg_store_cdrom(opts->lun, &fsg_opts->common->filesem, page,
3093 			       len);
3094 }
3095 
3096 CONFIGFS_ATTR(fsg_lun_opts_, cdrom);
3097 
3098 static ssize_t fsg_lun_opts_nofua_show(struct config_item *item, char *page)
3099 {
3100 	return fsg_show_nofua(to_fsg_lun_opts(item)->lun, page);
3101 }
3102 
3103 static ssize_t fsg_lun_opts_nofua_store(struct config_item *item,
3104 				       const char *page, size_t len)
3105 {
3106 	return fsg_store_nofua(to_fsg_lun_opts(item)->lun, page, len);
3107 }
3108 
3109 CONFIGFS_ATTR(fsg_lun_opts_, nofua);
3110 
3111 static ssize_t fsg_lun_opts_inquiry_string_show(struct config_item *item,
3112 						char *page)
3113 {
3114 	return fsg_show_inquiry_string(to_fsg_lun_opts(item)->lun, page);
3115 }
3116 
3117 static ssize_t fsg_lun_opts_inquiry_string_store(struct config_item *item,
3118 						 const char *page, size_t len)
3119 {
3120 	return fsg_store_inquiry_string(to_fsg_lun_opts(item)->lun, page, len);
3121 }
3122 
3123 CONFIGFS_ATTR(fsg_lun_opts_, inquiry_string);
3124 
3125 static struct configfs_attribute *fsg_lun_attrs[] = {
3126 	&fsg_lun_opts_attr_file,
3127 	&fsg_lun_opts_attr_ro,
3128 	&fsg_lun_opts_attr_removable,
3129 	&fsg_lun_opts_attr_cdrom,
3130 	&fsg_lun_opts_attr_nofua,
3131 	&fsg_lun_opts_attr_inquiry_string,
3132 	NULL,
3133 };
3134 
3135 static const struct config_item_type fsg_lun_type = {
3136 	.ct_item_ops	= &fsg_lun_item_ops,
3137 	.ct_attrs	= fsg_lun_attrs,
3138 	.ct_owner	= THIS_MODULE,
3139 };
3140 
3141 static struct config_group *fsg_lun_make(struct config_group *group,
3142 					 const char *name)
3143 {
3144 	struct fsg_lun_opts *opts;
3145 	struct fsg_opts *fsg_opts;
3146 	struct fsg_lun_config config;
3147 	char *num_str;
3148 	u8 num;
3149 	int ret;
3150 
3151 	num_str = strchr(name, '.');
3152 	if (!num_str) {
3153 		pr_err("Unable to locate . in LUN.NUMBER\n");
3154 		return ERR_PTR(-EINVAL);
3155 	}
3156 	num_str++;
3157 
3158 	ret = kstrtou8(num_str, 0, &num);
3159 	if (ret)
3160 		return ERR_PTR(ret);
3161 
3162 	fsg_opts = to_fsg_opts(&group->cg_item);
3163 	if (num >= FSG_MAX_LUNS)
3164 		return ERR_PTR(-ERANGE);
3165 	num = array_index_nospec(num, FSG_MAX_LUNS);
3166 
3167 	mutex_lock(&fsg_opts->lock);
3168 	if (fsg_opts->refcnt || fsg_opts->common->luns[num]) {
3169 		ret = -EBUSY;
3170 		goto out;
3171 	}
3172 
3173 	opts = kzalloc(sizeof(*opts), GFP_KERNEL);
3174 	if (!opts) {
3175 		ret = -ENOMEM;
3176 		goto out;
3177 	}
3178 
3179 	memset(&config, 0, sizeof(config));
3180 	config.removable = true;
3181 
3182 	ret = fsg_common_create_lun(fsg_opts->common, &config, num, name,
3183 				    (const char **)&group->cg_item.ci_name);
3184 	if (ret) {
3185 		kfree(opts);
3186 		goto out;
3187 	}
3188 	opts->lun = fsg_opts->common->luns[num];
3189 	opts->lun_id = num;
3190 	mutex_unlock(&fsg_opts->lock);
3191 
3192 	config_group_init_type_name(&opts->group, name, &fsg_lun_type);
3193 
3194 	return &opts->group;
3195 out:
3196 	mutex_unlock(&fsg_opts->lock);
3197 	return ERR_PTR(ret);
3198 }
3199 
3200 static void fsg_lun_drop(struct config_group *group, struct config_item *item)
3201 {
3202 	struct fsg_lun_opts *lun_opts;
3203 	struct fsg_opts *fsg_opts;
3204 
3205 	lun_opts = to_fsg_lun_opts(item);
3206 	fsg_opts = to_fsg_opts(&group->cg_item);
3207 
3208 	mutex_lock(&fsg_opts->lock);
3209 	if (fsg_opts->refcnt) {
3210 		struct config_item *gadget;
3211 
3212 		gadget = group->cg_item.ci_parent->ci_parent;
3213 		unregister_gadget_item(gadget);
3214 	}
3215 
3216 	fsg_common_remove_lun(lun_opts->lun);
3217 	fsg_opts->common->luns[lun_opts->lun_id] = NULL;
3218 	lun_opts->lun_id = 0;
3219 	mutex_unlock(&fsg_opts->lock);
3220 
3221 	config_item_put(item);
3222 }
3223 
3224 static void fsg_attr_release(struct config_item *item)
3225 {
3226 	struct fsg_opts *opts = to_fsg_opts(item);
3227 
3228 	usb_put_function_instance(&opts->func_inst);
3229 }
3230 
3231 static struct configfs_item_operations fsg_item_ops = {
3232 	.release		= fsg_attr_release,
3233 };
3234 
3235 static ssize_t fsg_opts_stall_show(struct config_item *item, char *page)
3236 {
3237 	struct fsg_opts *opts = to_fsg_opts(item);
3238 	int result;
3239 
3240 	mutex_lock(&opts->lock);
3241 	result = sprintf(page, "%d", opts->common->can_stall);
3242 	mutex_unlock(&opts->lock);
3243 
3244 	return result;
3245 }
3246 
3247 static ssize_t fsg_opts_stall_store(struct config_item *item, const char *page,
3248 				    size_t len)
3249 {
3250 	struct fsg_opts *opts = to_fsg_opts(item);
3251 	int ret;
3252 	bool stall;
3253 
3254 	mutex_lock(&opts->lock);
3255 
3256 	if (opts->refcnt) {
3257 		mutex_unlock(&opts->lock);
3258 		return -EBUSY;
3259 	}
3260 
3261 	ret = strtobool(page, &stall);
3262 	if (!ret) {
3263 		opts->common->can_stall = stall;
3264 		ret = len;
3265 	}
3266 
3267 	mutex_unlock(&opts->lock);
3268 
3269 	return ret;
3270 }
3271 
3272 CONFIGFS_ATTR(fsg_opts_, stall);
3273 
3274 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
3275 static ssize_t fsg_opts_num_buffers_show(struct config_item *item, char *page)
3276 {
3277 	struct fsg_opts *opts = to_fsg_opts(item);
3278 	int result;
3279 
3280 	mutex_lock(&opts->lock);
3281 	result = sprintf(page, "%d", opts->common->fsg_num_buffers);
3282 	mutex_unlock(&opts->lock);
3283 
3284 	return result;
3285 }
3286 
3287 static ssize_t fsg_opts_num_buffers_store(struct config_item *item,
3288 					  const char *page, size_t len)
3289 {
3290 	struct fsg_opts *opts = to_fsg_opts(item);
3291 	int ret;
3292 	u8 num;
3293 
3294 	mutex_lock(&opts->lock);
3295 	if (opts->refcnt) {
3296 		ret = -EBUSY;
3297 		goto end;
3298 	}
3299 	ret = kstrtou8(page, 0, &num);
3300 	if (ret)
3301 		goto end;
3302 
3303 	ret = fsg_common_set_num_buffers(opts->common, num);
3304 	if (ret)
3305 		goto end;
3306 	ret = len;
3307 
3308 end:
3309 	mutex_unlock(&opts->lock);
3310 	return ret;
3311 }
3312 
3313 CONFIGFS_ATTR(fsg_opts_, num_buffers);
3314 #endif
3315 
3316 static struct configfs_attribute *fsg_attrs[] = {
3317 	&fsg_opts_attr_stall,
3318 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
3319 	&fsg_opts_attr_num_buffers,
3320 #endif
3321 	NULL,
3322 };
3323 
3324 static struct configfs_group_operations fsg_group_ops = {
3325 	.make_group	= fsg_lun_make,
3326 	.drop_item	= fsg_lun_drop,
3327 };
3328 
3329 static const struct config_item_type fsg_func_type = {
3330 	.ct_item_ops	= &fsg_item_ops,
3331 	.ct_group_ops	= &fsg_group_ops,
3332 	.ct_attrs	= fsg_attrs,
3333 	.ct_owner	= THIS_MODULE,
3334 };
3335 
3336 static void fsg_free_inst(struct usb_function_instance *fi)
3337 {
3338 	struct fsg_opts *opts;
3339 
3340 	opts = fsg_opts_from_func_inst(fi);
3341 	fsg_common_release(opts->common);
3342 	kfree(opts);
3343 }
3344 
3345 static struct usb_function_instance *fsg_alloc_inst(void)
3346 {
3347 	struct fsg_opts *opts;
3348 	struct fsg_lun_config config;
3349 	int rc;
3350 
3351 	opts = kzalloc(sizeof(*opts), GFP_KERNEL);
3352 	if (!opts)
3353 		return ERR_PTR(-ENOMEM);
3354 	mutex_init(&opts->lock);
3355 	opts->func_inst.free_func_inst = fsg_free_inst;
3356 	opts->common = fsg_common_setup(opts->common);
3357 	if (IS_ERR(opts->common)) {
3358 		rc = PTR_ERR(opts->common);
3359 		goto release_opts;
3360 	}
3361 
3362 	rc = fsg_common_set_num_buffers(opts->common,
3363 					CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS);
3364 	if (rc)
3365 		goto release_common;
3366 
3367 	pr_info(FSG_DRIVER_DESC ", version: " FSG_DRIVER_VERSION "\n");
3368 
3369 	memset(&config, 0, sizeof(config));
3370 	config.removable = true;
3371 	rc = fsg_common_create_lun(opts->common, &config, 0, "lun.0",
3372 			(const char **)&opts->func_inst.group.cg_item.ci_name);
3373 	if (rc)
3374 		goto release_buffers;
3375 
3376 	opts->lun0.lun = opts->common->luns[0];
3377 	opts->lun0.lun_id = 0;
3378 
3379 	config_group_init_type_name(&opts->func_inst.group, "", &fsg_func_type);
3380 
3381 	config_group_init_type_name(&opts->lun0.group, "lun.0", &fsg_lun_type);
3382 	configfs_add_default_group(&opts->lun0.group, &opts->func_inst.group);
3383 
3384 	return &opts->func_inst;
3385 
3386 release_buffers:
3387 	fsg_common_free_buffers(opts->common);
3388 release_common:
3389 	kfree(opts->common);
3390 release_opts:
3391 	kfree(opts);
3392 	return ERR_PTR(rc);
3393 }
3394 
3395 static void fsg_free(struct usb_function *f)
3396 {
3397 	struct fsg_dev *fsg;
3398 	struct fsg_opts *opts;
3399 
3400 	fsg = container_of(f, struct fsg_dev, function);
3401 	opts = container_of(f->fi, struct fsg_opts, func_inst);
3402 
3403 	mutex_lock(&opts->lock);
3404 	opts->refcnt--;
3405 	mutex_unlock(&opts->lock);
3406 
3407 	kfree(fsg);
3408 }
3409 
3410 static struct usb_function *fsg_alloc(struct usb_function_instance *fi)
3411 {
3412 	struct fsg_opts *opts = fsg_opts_from_func_inst(fi);
3413 	struct fsg_common *common = opts->common;
3414 	struct fsg_dev *fsg;
3415 
3416 	fsg = kzalloc(sizeof(*fsg), GFP_KERNEL);
3417 	if (unlikely(!fsg))
3418 		return ERR_PTR(-ENOMEM);
3419 
3420 	mutex_lock(&opts->lock);
3421 	opts->refcnt++;
3422 	mutex_unlock(&opts->lock);
3423 
3424 	fsg->function.name	= FSG_DRIVER_DESC;
3425 	fsg->function.bind	= fsg_bind;
3426 	fsg->function.unbind	= fsg_unbind;
3427 	fsg->function.setup	= fsg_setup;
3428 	fsg->function.set_alt	= fsg_set_alt;
3429 	fsg->function.disable	= fsg_disable;
3430 	fsg->function.free_func	= fsg_free;
3431 
3432 	fsg->common               = common;
3433 
3434 	return &fsg->function;
3435 }
3436 
3437 DECLARE_USB_FUNCTION_INIT(mass_storage, fsg_alloc_inst, fsg_alloc);
3438 MODULE_LICENSE("GPL");
3439 MODULE_AUTHOR("Michal Nazarewicz");
3440 
3441 /************************* Module parameters *************************/
3442 
3443 
3444 void fsg_config_from_params(struct fsg_config *cfg,
3445 		       const struct fsg_module_parameters *params,
3446 		       unsigned int fsg_num_buffers)
3447 {
3448 	struct fsg_lun_config *lun;
3449 	unsigned i;
3450 
3451 	/* Configure LUNs */
3452 	cfg->nluns =
3453 		min(params->luns ?: (params->file_count ?: 1u),
3454 		    (unsigned)FSG_MAX_LUNS);
3455 	for (i = 0, lun = cfg->luns; i < cfg->nluns; ++i, ++lun) {
3456 		lun->ro = !!params->ro[i];
3457 		lun->cdrom = !!params->cdrom[i];
3458 		lun->removable = !!params->removable[i];
3459 		lun->filename =
3460 			params->file_count > i && params->file[i][0]
3461 			? params->file[i]
3462 			: NULL;
3463 	}
3464 
3465 	/* Let MSF use defaults */
3466 	cfg->vendor_name = NULL;
3467 	cfg->product_name = NULL;
3468 
3469 	cfg->ops = NULL;
3470 	cfg->private_data = NULL;
3471 
3472 	/* Finalise */
3473 	cfg->can_stall = params->stall;
3474 	cfg->fsg_num_buffers = fsg_num_buffers;
3475 }
3476 EXPORT_SYMBOL_GPL(fsg_config_from_params);
3477