1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
2 /*
3  * f_mass_storage.c -- Mass Storage USB Composite Function
4  *
5  * Copyright (C) 2003-2008 Alan Stern
6  * Copyright (C) 2009 Samsung Electronics
7  *                    Author: Michal Nazarewicz <mina86@mina86.com>
8  * All rights reserved.
9  *
10  * Redistribution and use in source and binary forms, with or without
11  * modification, are permitted provided that the following conditions
12  * are met:
13  * 1. Redistributions of source code must retain the above copyright
14  *    notice, this list of conditions, and the following disclaimer,
15  *    without modification.
16  * 2. Redistributions in binary form must reproduce the above copyright
17  *    notice, this list of conditions and the following disclaimer in the
18  *    documentation and/or other materials provided with the distribution.
19  * 3. The names of the above-listed copyright holders may not be used
20  *    to endorse or promote products derived from this software without
21  *    specific prior written permission.
22  *
23  * ALTERNATIVELY, this software may be distributed under the terms of the
24  * GNU General Public License ("GPL") as published by the Free Software
25  * Foundation, either version 2 of that License or (at your option) any
26  * later version.
27  *
28  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
29  * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
30  * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
31  * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
32  * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
33  * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
34  * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
35  * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
36  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
37  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
38  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
39  */
40 
41 /*
42  * The Mass Storage Function acts as a USB Mass Storage device,
43  * appearing to the host as a disk drive or as a CD-ROM drive.  In
44  * addition to providing an example of a genuinely useful composite
45  * function for a USB device, it also illustrates a technique of
46  * double-buffering for increased throughput.
47  *
48  * For more information about MSF and in particular its module
49  * parameters and sysfs interface read the
50  * <Documentation/usb/mass-storage.rst> file.
51  */
52 
53 /*
54  * MSF is configured by specifying a fsg_config structure.  It has the
55  * following fields:
56  *
57  *	nluns		Number of LUNs function have (anywhere from 1
58  *				to FSG_MAX_LUNS).
59  *	luns		An array of LUN configuration values.  This
60  *				should be filled for each LUN that
61  *				function will include (ie. for "nluns"
62  *				LUNs).  Each element of the array has
63  *				the following fields:
64  *	->filename	The path to the backing file for the LUN.
65  *				Required if LUN is not marked as
66  *				removable.
67  *	->ro		Flag specifying access to the LUN shall be
68  *				read-only.  This is implied if CD-ROM
69  *				emulation is enabled as well as when
70  *				it was impossible to open "filename"
71  *				in R/W mode.
72  *	->removable	Flag specifying that LUN shall be indicated as
73  *				being removable.
74  *	->cdrom		Flag specifying that LUN shall be reported as
75  *				being a CD-ROM.
76  *	->nofua		Flag specifying that FUA flag in SCSI WRITE(10,12)
77  *				commands for this LUN shall be ignored.
78  *
79  *	vendor_name
80  *	product_name
81  *	release		Information used as a reply to INQUIRY
82  *				request.  To use default set to NULL,
83  *				NULL, 0xffff respectively.  The first
84  *				field should be 8 and the second 16
85  *				characters or less.
86  *
87  *	can_stall	Set to permit function to halt bulk endpoints.
88  *				Disabled on some USB devices known not
89  *				to work correctly.  You should set it
90  *				to true.
91  *
92  * If "removable" is not set for a LUN then a backing file must be
93  * specified.  If it is set, then NULL filename means the LUN's medium
94  * is not loaded (an empty string as "filename" in the fsg_config
95  * structure causes error).  The CD-ROM emulation includes a single
96  * data track and no audio tracks; hence there need be only one
97  * backing file per LUN.
98  *
99  * This function is heavily based on "File-backed Storage Gadget" by
100  * Alan Stern which in turn is heavily based on "Gadget Zero" by David
101  * Brownell.  The driver's SCSI command interface was based on the
102  * "Information technology - Small Computer System Interface - 2"
103  * document from X3T9.2 Project 375D, Revision 10L, 7-SEP-93,
104  * available at <http://www.t10.org/ftp/t10/drafts/s2/s2-r10l.pdf>.
105  * The single exception is opcode 0x23 (READ FORMAT CAPACITIES), which
106  * was based on the "Universal Serial Bus Mass Storage Class UFI
107  * Command Specification" document, Revision 1.0, December 14, 1998,
108  * available at
109  * <http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf>.
110  */
111 
112 /*
113  *				Driver Design
114  *
115  * The MSF is fairly straightforward.  There is a main kernel
116  * thread that handles most of the work.  Interrupt routines field
117  * callbacks from the controller driver: bulk- and interrupt-request
118  * completion notifications, endpoint-0 events, and disconnect events.
119  * Completion events are passed to the main thread by wakeup calls.  Many
120  * ep0 requests are handled at interrupt time, but SetInterface,
121  * SetConfiguration, and device reset requests are forwarded to the
122  * thread in the form of "exceptions" using SIGUSR1 signals (since they
123  * should interrupt any ongoing file I/O operations).
124  *
125  * The thread's main routine implements the standard command/data/status
126  * parts of a SCSI interaction.  It and its subroutines are full of tests
127  * for pending signals/exceptions -- all this polling is necessary since
128  * the kernel has no setjmp/longjmp equivalents.  (Maybe this is an
129  * indication that the driver really wants to be running in userspace.)
130  * An important point is that so long as the thread is alive it keeps an
131  * open reference to the backing file.  This will prevent unmounting
132  * the backing file's underlying filesystem and could cause problems
133  * during system shutdown, for example.  To prevent such problems, the
134  * thread catches INT, TERM, and KILL signals and converts them into
135  * an EXIT exception.
136  *
137  * In normal operation the main thread is started during the gadget's
138  * fsg_bind() callback and stopped during fsg_unbind().  But it can
139  * also exit when it receives a signal, and there's no point leaving
140  * the gadget running when the thread is dead.  As of this moment, MSF
141  * provides no way to deregister the gadget when thread dies -- maybe
142  * a callback functions is needed.
143  *
144  * To provide maximum throughput, the driver uses a circular pipeline of
145  * buffer heads (struct fsg_buffhd).  In principle the pipeline can be
146  * arbitrarily long; in practice the benefits don't justify having more
147  * than 2 stages (i.e., double buffering).  But it helps to think of the
148  * pipeline as being a long one.  Each buffer head contains a bulk-in and
149  * a bulk-out request pointer (since the buffer can be used for both
150  * output and input -- directions always are given from the host's
151  * point of view) as well as a pointer to the buffer and various state
152  * variables.
153  *
154  * Use of the pipeline follows a simple protocol.  There is a variable
155  * (fsg->next_buffhd_to_fill) that points to the next buffer head to use.
156  * At any time that buffer head may still be in use from an earlier
157  * request, so each buffer head has a state variable indicating whether
158  * it is EMPTY, FULL, or BUSY.  Typical use involves waiting for the
159  * buffer head to be EMPTY, filling the buffer either by file I/O or by
160  * USB I/O (during which the buffer head is BUSY), and marking the buffer
161  * head FULL when the I/O is complete.  Then the buffer will be emptied
162  * (again possibly by USB I/O, during which it is marked BUSY) and
163  * finally marked EMPTY again (possibly by a completion routine).
164  *
165  * A module parameter tells the driver to avoid stalling the bulk
166  * endpoints wherever the transport specification allows.  This is
167  * necessary for some UDCs like the SuperH, which cannot reliably clear a
168  * halt on a bulk endpoint.  However, under certain circumstances the
169  * Bulk-only specification requires a stall.  In such cases the driver
170  * will halt the endpoint and set a flag indicating that it should clear
171  * the halt in software during the next device reset.  Hopefully this
172  * will permit everything to work correctly.  Furthermore, although the
173  * specification allows the bulk-out endpoint to halt when the host sends
174  * too much data, implementing this would cause an unavoidable race.
175  * The driver will always use the "no-stall" approach for OUT transfers.
176  *
177  * One subtle point concerns sending status-stage responses for ep0
178  * requests.  Some of these requests, such as device reset, can involve
179  * interrupting an ongoing file I/O operation, which might take an
180  * arbitrarily long time.  During that delay the host might give up on
181  * the original ep0 request and issue a new one.  When that happens the
182  * driver should not notify the host about completion of the original
183  * request, as the host will no longer be waiting for it.  So the driver
184  * assigns to each ep0 request a unique tag, and it keeps track of the
185  * tag value of the request associated with a long-running exception
186  * (device-reset, interface-change, or configuration-change).  When the
187  * exception handler is finished, the status-stage response is submitted
188  * only if the current ep0 request tag is equal to the exception request
189  * tag.  Thus only the most recently received ep0 request will get a
190  * status-stage response.
191  *
192  * Warning: This driver source file is too long.  It ought to be split up
193  * into a header file plus about 3 separate .c files, to handle the details
194  * of the Gadget, USB Mass Storage, and SCSI protocols.
195  */
196 
197 
198 /* #define VERBOSE_DEBUG */
199 /* #define DUMP_MSGS */
200 
201 #include <linux/blkdev.h>
202 #include <linux/completion.h>
203 #include <linux/dcache.h>
204 #include <linux/delay.h>
205 #include <linux/device.h>
206 #include <linux/fcntl.h>
207 #include <linux/file.h>
208 #include <linux/fs.h>
209 #include <linux/kthread.h>
210 #include <linux/sched/signal.h>
211 #include <linux/limits.h>
212 #include <linux/rwsem.h>
213 #include <linux/slab.h>
214 #include <linux/spinlock.h>
215 #include <linux/string.h>
216 #include <linux/freezer.h>
217 #include <linux/module.h>
218 #include <linux/uaccess.h>
219 #include <asm/unaligned.h>
220 
221 #include <linux/usb/ch9.h>
222 #include <linux/usb/gadget.h>
223 #include <linux/usb/composite.h>
224 
225 #include <linux/nospec.h>
226 
227 #include "configfs.h"
228 
229 
230 /*------------------------------------------------------------------------*/
231 
232 #define FSG_DRIVER_DESC		"Mass Storage Function"
233 #define FSG_DRIVER_VERSION	"2009/09/11"
234 
235 static const char fsg_string_interface[] = "Mass Storage";
236 
237 #include "storage_common.h"
238 #include "f_mass_storage.h"
239 
240 /* Static strings, in UTF-8 (for simplicity we use only ASCII characters) */
241 static struct usb_string		fsg_strings[] = {
242 	{FSG_STRING_INTERFACE,		fsg_string_interface},
243 	{}
244 };
245 
246 static struct usb_gadget_strings	fsg_stringtab = {
247 	.language	= 0x0409,		/* en-us */
248 	.strings	= fsg_strings,
249 };
250 
251 static struct usb_gadget_strings *fsg_strings_array[] = {
252 	&fsg_stringtab,
253 	NULL,
254 };
255 
256 /*-------------------------------------------------------------------------*/
257 
258 struct fsg_dev;
259 struct fsg_common;
260 
261 /* Data shared by all the FSG instances. */
262 struct fsg_common {
263 	struct usb_gadget	*gadget;
264 	struct usb_composite_dev *cdev;
265 	struct fsg_dev		*fsg;
266 	wait_queue_head_t	io_wait;
267 	wait_queue_head_t	fsg_wait;
268 
269 	/* filesem protects: backing files in use */
270 	struct rw_semaphore	filesem;
271 
272 	/* lock protects: state and thread_task */
273 	spinlock_t		lock;
274 
275 	struct usb_ep		*ep0;		/* Copy of gadget->ep0 */
276 	struct usb_request	*ep0req;	/* Copy of cdev->req */
277 	unsigned int		ep0_req_tag;
278 
279 	struct fsg_buffhd	*next_buffhd_to_fill;
280 	struct fsg_buffhd	*next_buffhd_to_drain;
281 	struct fsg_buffhd	*buffhds;
282 	unsigned int		fsg_num_buffers;
283 
284 	int			cmnd_size;
285 	u8			cmnd[MAX_COMMAND_SIZE];
286 
287 	unsigned int		lun;
288 	struct fsg_lun		*luns[FSG_MAX_LUNS];
289 	struct fsg_lun		*curlun;
290 
291 	unsigned int		bulk_out_maxpacket;
292 	enum fsg_state		state;		/* For exception handling */
293 	unsigned int		exception_req_tag;
294 	void			*exception_arg;
295 
296 	enum data_direction	data_dir;
297 	u32			data_size;
298 	u32			data_size_from_cmnd;
299 	u32			tag;
300 	u32			residue;
301 	u32			usb_amount_left;
302 
303 	unsigned int		can_stall:1;
304 	unsigned int		free_storage_on_release:1;
305 	unsigned int		phase_error:1;
306 	unsigned int		short_packet_received:1;
307 	unsigned int		bad_lun_okay:1;
308 	unsigned int		running:1;
309 	unsigned int		sysfs:1;
310 
311 	struct completion	thread_notifier;
312 	struct task_struct	*thread_task;
313 
314 	/* Gadget's private data. */
315 	void			*private_data;
316 
317 	char inquiry_string[INQUIRY_STRING_LEN];
318 };
319 
320 struct fsg_dev {
321 	struct usb_function	function;
322 	struct usb_gadget	*gadget;	/* Copy of cdev->gadget */
323 	struct fsg_common	*common;
324 
325 	u16			interface_number;
326 
327 	unsigned int		bulk_in_enabled:1;
328 	unsigned int		bulk_out_enabled:1;
329 
330 	unsigned long		atomic_bitflags;
331 #define IGNORE_BULK_OUT		0
332 
333 	struct usb_ep		*bulk_in;
334 	struct usb_ep		*bulk_out;
335 };
336 
337 static inline int __fsg_is_set(struct fsg_common *common,
338 			       const char *func, unsigned line)
339 {
340 	if (common->fsg)
341 		return 1;
342 	ERROR(common, "common->fsg is NULL in %s at %u\n", func, line);
343 	WARN_ON(1);
344 	return 0;
345 }
346 
347 #define fsg_is_set(common) likely(__fsg_is_set(common, __func__, __LINE__))
348 
349 static inline struct fsg_dev *fsg_from_func(struct usb_function *f)
350 {
351 	return container_of(f, struct fsg_dev, function);
352 }
353 
354 typedef void (*fsg_routine_t)(struct fsg_dev *);
355 
356 static int exception_in_progress(struct fsg_common *common)
357 {
358 	return common->state > FSG_STATE_NORMAL;
359 }
360 
361 /* Make bulk-out requests be divisible by the maxpacket size */
362 static void set_bulk_out_req_length(struct fsg_common *common,
363 				    struct fsg_buffhd *bh, unsigned int length)
364 {
365 	unsigned int	rem;
366 
367 	bh->bulk_out_intended_length = length;
368 	rem = length % common->bulk_out_maxpacket;
369 	if (rem > 0)
370 		length += common->bulk_out_maxpacket - rem;
371 	bh->outreq->length = length;
372 }
373 
374 
375 /*-------------------------------------------------------------------------*/
376 
377 static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep)
378 {
379 	const char	*name;
380 
381 	if (ep == fsg->bulk_in)
382 		name = "bulk-in";
383 	else if (ep == fsg->bulk_out)
384 		name = "bulk-out";
385 	else
386 		name = ep->name;
387 	DBG(fsg, "%s set halt\n", name);
388 	return usb_ep_set_halt(ep);
389 }
390 
391 
392 /*-------------------------------------------------------------------------*/
393 
394 /* These routines may be called in process context or in_irq */
395 
396 static void __raise_exception(struct fsg_common *common, enum fsg_state new_state,
397 			      void *arg)
398 {
399 	unsigned long		flags;
400 
401 	/*
402 	 * Do nothing if a higher-priority exception is already in progress.
403 	 * If a lower-or-equal priority exception is in progress, preempt it
404 	 * and notify the main thread by sending it a signal.
405 	 */
406 	spin_lock_irqsave(&common->lock, flags);
407 	if (common->state <= new_state) {
408 		common->exception_req_tag = common->ep0_req_tag;
409 		common->state = new_state;
410 		common->exception_arg = arg;
411 		if (common->thread_task)
412 			send_sig_info(SIGUSR1, SEND_SIG_PRIV,
413 				      common->thread_task);
414 	}
415 	spin_unlock_irqrestore(&common->lock, flags);
416 }
417 
418 static void raise_exception(struct fsg_common *common, enum fsg_state new_state)
419 {
420 	__raise_exception(common, new_state, NULL);
421 }
422 
423 /*-------------------------------------------------------------------------*/
424 
425 static int ep0_queue(struct fsg_common *common)
426 {
427 	int	rc;
428 
429 	rc = usb_ep_queue(common->ep0, common->ep0req, GFP_ATOMIC);
430 	common->ep0->driver_data = common;
431 	if (rc != 0 && rc != -ESHUTDOWN) {
432 		/* We can't do much more than wait for a reset */
433 		WARNING(common, "error in submission: %s --> %d\n",
434 			common->ep0->name, rc);
435 	}
436 	return rc;
437 }
438 
439 
440 /*-------------------------------------------------------------------------*/
441 
442 /* Completion handlers. These always run in_irq. */
443 
444 static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req)
445 {
446 	struct fsg_common	*common = ep->driver_data;
447 	struct fsg_buffhd	*bh = req->context;
448 
449 	if (req->status || req->actual != req->length)
450 		DBG(common, "%s --> %d, %u/%u\n", __func__,
451 		    req->status, req->actual, req->length);
452 	if (req->status == -ECONNRESET)		/* Request was cancelled */
453 		usb_ep_fifo_flush(ep);
454 
455 	/* Synchronize with the smp_load_acquire() in sleep_thread() */
456 	smp_store_release(&bh->state, BUF_STATE_EMPTY);
457 	wake_up(&common->io_wait);
458 }
459 
460 static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req)
461 {
462 	struct fsg_common	*common = ep->driver_data;
463 	struct fsg_buffhd	*bh = req->context;
464 
465 	dump_msg(common, "bulk-out", req->buf, req->actual);
466 	if (req->status || req->actual != bh->bulk_out_intended_length)
467 		DBG(common, "%s --> %d, %u/%u\n", __func__,
468 		    req->status, req->actual, bh->bulk_out_intended_length);
469 	if (req->status == -ECONNRESET)		/* Request was cancelled */
470 		usb_ep_fifo_flush(ep);
471 
472 	/* Synchronize with the smp_load_acquire() in sleep_thread() */
473 	smp_store_release(&bh->state, BUF_STATE_FULL);
474 	wake_up(&common->io_wait);
475 }
476 
477 static int _fsg_common_get_max_lun(struct fsg_common *common)
478 {
479 	int i = ARRAY_SIZE(common->luns) - 1;
480 
481 	while (i >= 0 && !common->luns[i])
482 		--i;
483 
484 	return i;
485 }
486 
487 static int fsg_setup(struct usb_function *f,
488 		     const struct usb_ctrlrequest *ctrl)
489 {
490 	struct fsg_dev		*fsg = fsg_from_func(f);
491 	struct usb_request	*req = fsg->common->ep0req;
492 	u16			w_index = le16_to_cpu(ctrl->wIndex);
493 	u16			w_value = le16_to_cpu(ctrl->wValue);
494 	u16			w_length = le16_to_cpu(ctrl->wLength);
495 
496 	if (!fsg_is_set(fsg->common))
497 		return -EOPNOTSUPP;
498 
499 	++fsg->common->ep0_req_tag;	/* Record arrival of a new request */
500 	req->context = NULL;
501 	req->length = 0;
502 	dump_msg(fsg, "ep0-setup", (u8 *) ctrl, sizeof(*ctrl));
503 
504 	switch (ctrl->bRequest) {
505 
506 	case US_BULK_RESET_REQUEST:
507 		if (ctrl->bRequestType !=
508 		    (USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE))
509 			break;
510 		if (w_index != fsg->interface_number || w_value != 0 ||
511 				w_length != 0)
512 			return -EDOM;
513 
514 		/*
515 		 * Raise an exception to stop the current operation
516 		 * and reinitialize our state.
517 		 */
518 		DBG(fsg, "bulk reset request\n");
519 		raise_exception(fsg->common, FSG_STATE_PROTOCOL_RESET);
520 		return USB_GADGET_DELAYED_STATUS;
521 
522 	case US_BULK_GET_MAX_LUN:
523 		if (ctrl->bRequestType !=
524 		    (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE))
525 			break;
526 		if (w_index != fsg->interface_number || w_value != 0 ||
527 				w_length != 1)
528 			return -EDOM;
529 		VDBG(fsg, "get max LUN\n");
530 		*(u8 *)req->buf = _fsg_common_get_max_lun(fsg->common);
531 
532 		/* Respond with data/status */
533 		req->length = min((u16)1, w_length);
534 		return ep0_queue(fsg->common);
535 	}
536 
537 	VDBG(fsg,
538 	     "unknown class-specific control req %02x.%02x v%04x i%04x l%u\n",
539 	     ctrl->bRequestType, ctrl->bRequest,
540 	     le16_to_cpu(ctrl->wValue), w_index, w_length);
541 	return -EOPNOTSUPP;
542 }
543 
544 
545 /*-------------------------------------------------------------------------*/
546 
547 /* All the following routines run in process context */
548 
549 /* Use this for bulk or interrupt transfers, not ep0 */
550 static int start_transfer(struct fsg_dev *fsg, struct usb_ep *ep,
551 			   struct usb_request *req)
552 {
553 	int	rc;
554 
555 	if (ep == fsg->bulk_in)
556 		dump_msg(fsg, "bulk-in", req->buf, req->length);
557 
558 	rc = usb_ep_queue(ep, req, GFP_KERNEL);
559 	if (rc) {
560 
561 		/* We can't do much more than wait for a reset */
562 		req->status = rc;
563 
564 		/*
565 		 * Note: currently the net2280 driver fails zero-length
566 		 * submissions if DMA is enabled.
567 		 */
568 		if (rc != -ESHUTDOWN &&
569 				!(rc == -EOPNOTSUPP && req->length == 0))
570 			WARNING(fsg, "error in submission: %s --> %d\n",
571 					ep->name, rc);
572 	}
573 	return rc;
574 }
575 
576 static bool start_in_transfer(struct fsg_common *common, struct fsg_buffhd *bh)
577 {
578 	if (!fsg_is_set(common))
579 		return false;
580 	bh->state = BUF_STATE_SENDING;
581 	if (start_transfer(common->fsg, common->fsg->bulk_in, bh->inreq))
582 		bh->state = BUF_STATE_EMPTY;
583 	return true;
584 }
585 
586 static bool start_out_transfer(struct fsg_common *common, struct fsg_buffhd *bh)
587 {
588 	if (!fsg_is_set(common))
589 		return false;
590 	bh->state = BUF_STATE_RECEIVING;
591 	if (start_transfer(common->fsg, common->fsg->bulk_out, bh->outreq))
592 		bh->state = BUF_STATE_FULL;
593 	return true;
594 }
595 
596 static int sleep_thread(struct fsg_common *common, bool can_freeze,
597 		struct fsg_buffhd *bh)
598 {
599 	int	rc;
600 
601 	/* Wait until a signal arrives or bh is no longer busy */
602 	if (can_freeze)
603 		/*
604 		 * synchronize with the smp_store_release(&bh->state) in
605 		 * bulk_in_complete() or bulk_out_complete()
606 		 */
607 		rc = wait_event_freezable(common->io_wait,
608 				bh && smp_load_acquire(&bh->state) >=
609 					BUF_STATE_EMPTY);
610 	else
611 		rc = wait_event_interruptible(common->io_wait,
612 				bh && smp_load_acquire(&bh->state) >=
613 					BUF_STATE_EMPTY);
614 	return rc ? -EINTR : 0;
615 }
616 
617 
618 /*-------------------------------------------------------------------------*/
619 
620 static int do_read(struct fsg_common *common)
621 {
622 	struct fsg_lun		*curlun = common->curlun;
623 	u32			lba;
624 	struct fsg_buffhd	*bh;
625 	int			rc;
626 	u32			amount_left;
627 	loff_t			file_offset, file_offset_tmp;
628 	unsigned int		amount;
629 	ssize_t			nread;
630 
631 	/*
632 	 * Get the starting Logical Block Address and check that it's
633 	 * not too big.
634 	 */
635 	if (common->cmnd[0] == READ_6)
636 		lba = get_unaligned_be24(&common->cmnd[1]);
637 	else {
638 		lba = get_unaligned_be32(&common->cmnd[2]);
639 
640 		/*
641 		 * We allow DPO (Disable Page Out = don't save data in the
642 		 * cache) and FUA (Force Unit Access = don't read from the
643 		 * cache), but we don't implement them.
644 		 */
645 		if ((common->cmnd[1] & ~0x18) != 0) {
646 			curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
647 			return -EINVAL;
648 		}
649 	}
650 	if (lba >= curlun->num_sectors) {
651 		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
652 		return -EINVAL;
653 	}
654 	file_offset = ((loff_t) lba) << curlun->blkbits;
655 
656 	/* Carry out the file reads */
657 	amount_left = common->data_size_from_cmnd;
658 	if (unlikely(amount_left == 0))
659 		return -EIO;		/* No default reply */
660 
661 	for (;;) {
662 		/*
663 		 * Figure out how much we need to read:
664 		 * Try to read the remaining amount.
665 		 * But don't read more than the buffer size.
666 		 * And don't try to read past the end of the file.
667 		 */
668 		amount = min(amount_left, FSG_BUFLEN);
669 		amount = min((loff_t)amount,
670 			     curlun->file_length - file_offset);
671 
672 		/* Wait for the next buffer to become available */
673 		bh = common->next_buffhd_to_fill;
674 		rc = sleep_thread(common, false, bh);
675 		if (rc)
676 			return rc;
677 
678 		/*
679 		 * If we were asked to read past the end of file,
680 		 * end with an empty buffer.
681 		 */
682 		if (amount == 0) {
683 			curlun->sense_data =
684 					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
685 			curlun->sense_data_info =
686 					file_offset >> curlun->blkbits;
687 			curlun->info_valid = 1;
688 			bh->inreq->length = 0;
689 			bh->state = BUF_STATE_FULL;
690 			break;
691 		}
692 
693 		/* Perform the read */
694 		file_offset_tmp = file_offset;
695 		nread = kernel_read(curlun->filp, bh->buf, amount,
696 				&file_offset_tmp);
697 		VLDBG(curlun, "file read %u @ %llu -> %d\n", amount,
698 		      (unsigned long long)file_offset, (int)nread);
699 		if (signal_pending(current))
700 			return -EINTR;
701 
702 		if (nread < 0) {
703 			LDBG(curlun, "error in file read: %d\n", (int)nread);
704 			nread = 0;
705 		} else if (nread < amount) {
706 			LDBG(curlun, "partial file read: %d/%u\n",
707 			     (int)nread, amount);
708 			nread = round_down(nread, curlun->blksize);
709 		}
710 		file_offset  += nread;
711 		amount_left  -= nread;
712 		common->residue -= nread;
713 
714 		/*
715 		 * Except at the end of the transfer, nread will be
716 		 * equal to the buffer size, which is divisible by the
717 		 * bulk-in maxpacket size.
718 		 */
719 		bh->inreq->length = nread;
720 		bh->state = BUF_STATE_FULL;
721 
722 		/* If an error occurred, report it and its position */
723 		if (nread < amount) {
724 			curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
725 			curlun->sense_data_info =
726 					file_offset >> curlun->blkbits;
727 			curlun->info_valid = 1;
728 			break;
729 		}
730 
731 		if (amount_left == 0)
732 			break;		/* No more left to read */
733 
734 		/* Send this buffer and go read some more */
735 		bh->inreq->zero = 0;
736 		if (!start_in_transfer(common, bh))
737 			/* Don't know what to do if common->fsg is NULL */
738 			return -EIO;
739 		common->next_buffhd_to_fill = bh->next;
740 	}
741 
742 	return -EIO;		/* No default reply */
743 }
744 
745 
746 /*-------------------------------------------------------------------------*/
747 
748 static int do_write(struct fsg_common *common)
749 {
750 	struct fsg_lun		*curlun = common->curlun;
751 	u32			lba;
752 	struct fsg_buffhd	*bh;
753 	int			get_some_more;
754 	u32			amount_left_to_req, amount_left_to_write;
755 	loff_t			usb_offset, file_offset, file_offset_tmp;
756 	unsigned int		amount;
757 	ssize_t			nwritten;
758 	int			rc;
759 
760 	if (curlun->ro) {
761 		curlun->sense_data = SS_WRITE_PROTECTED;
762 		return -EINVAL;
763 	}
764 	spin_lock(&curlun->filp->f_lock);
765 	curlun->filp->f_flags &= ~O_SYNC;	/* Default is not to wait */
766 	spin_unlock(&curlun->filp->f_lock);
767 
768 	/*
769 	 * Get the starting Logical Block Address and check that it's
770 	 * not too big
771 	 */
772 	if (common->cmnd[0] == WRITE_6)
773 		lba = get_unaligned_be24(&common->cmnd[1]);
774 	else {
775 		lba = get_unaligned_be32(&common->cmnd[2]);
776 
777 		/*
778 		 * We allow DPO (Disable Page Out = don't save data in the
779 		 * cache) and FUA (Force Unit Access = write directly to the
780 		 * medium).  We don't implement DPO; we implement FUA by
781 		 * performing synchronous output.
782 		 */
783 		if (common->cmnd[1] & ~0x18) {
784 			curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
785 			return -EINVAL;
786 		}
787 		if (!curlun->nofua && (common->cmnd[1] & 0x08)) { /* FUA */
788 			spin_lock(&curlun->filp->f_lock);
789 			curlun->filp->f_flags |= O_SYNC;
790 			spin_unlock(&curlun->filp->f_lock);
791 		}
792 	}
793 	if (lba >= curlun->num_sectors) {
794 		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
795 		return -EINVAL;
796 	}
797 
798 	/* Carry out the file writes */
799 	get_some_more = 1;
800 	file_offset = usb_offset = ((loff_t) lba) << curlun->blkbits;
801 	amount_left_to_req = common->data_size_from_cmnd;
802 	amount_left_to_write = common->data_size_from_cmnd;
803 
804 	while (amount_left_to_write > 0) {
805 
806 		/* Queue a request for more data from the host */
807 		bh = common->next_buffhd_to_fill;
808 		if (bh->state == BUF_STATE_EMPTY && get_some_more) {
809 
810 			/*
811 			 * Figure out how much we want to get:
812 			 * Try to get the remaining amount,
813 			 * but not more than the buffer size.
814 			 */
815 			amount = min(amount_left_to_req, FSG_BUFLEN);
816 
817 			/* Beyond the end of the backing file? */
818 			if (usb_offset >= curlun->file_length) {
819 				get_some_more = 0;
820 				curlun->sense_data =
821 					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
822 				curlun->sense_data_info =
823 					usb_offset >> curlun->blkbits;
824 				curlun->info_valid = 1;
825 				continue;
826 			}
827 
828 			/* Get the next buffer */
829 			usb_offset += amount;
830 			common->usb_amount_left -= amount;
831 			amount_left_to_req -= amount;
832 			if (amount_left_to_req == 0)
833 				get_some_more = 0;
834 
835 			/*
836 			 * Except at the end of the transfer, amount will be
837 			 * equal to the buffer size, which is divisible by
838 			 * the bulk-out maxpacket size.
839 			 */
840 			set_bulk_out_req_length(common, bh, amount);
841 			if (!start_out_transfer(common, bh))
842 				/* Dunno what to do if common->fsg is NULL */
843 				return -EIO;
844 			common->next_buffhd_to_fill = bh->next;
845 			continue;
846 		}
847 
848 		/* Write the received data to the backing file */
849 		bh = common->next_buffhd_to_drain;
850 		if (bh->state == BUF_STATE_EMPTY && !get_some_more)
851 			break;			/* We stopped early */
852 
853 		/* Wait for the data to be received */
854 		rc = sleep_thread(common, false, bh);
855 		if (rc)
856 			return rc;
857 
858 		common->next_buffhd_to_drain = bh->next;
859 		bh->state = BUF_STATE_EMPTY;
860 
861 		/* Did something go wrong with the transfer? */
862 		if (bh->outreq->status != 0) {
863 			curlun->sense_data = SS_COMMUNICATION_FAILURE;
864 			curlun->sense_data_info =
865 					file_offset >> curlun->blkbits;
866 			curlun->info_valid = 1;
867 			break;
868 		}
869 
870 		amount = bh->outreq->actual;
871 		if (curlun->file_length - file_offset < amount) {
872 			LERROR(curlun, "write %u @ %llu beyond end %llu\n",
873 				       amount, (unsigned long long)file_offset,
874 				       (unsigned long long)curlun->file_length);
875 			amount = curlun->file_length - file_offset;
876 		}
877 
878 		/*
879 		 * Don't accept excess data.  The spec doesn't say
880 		 * what to do in this case.  We'll ignore the error.
881 		 */
882 		amount = min(amount, bh->bulk_out_intended_length);
883 
884 		/* Don't write a partial block */
885 		amount = round_down(amount, curlun->blksize);
886 		if (amount == 0)
887 			goto empty_write;
888 
889 		/* Perform the write */
890 		file_offset_tmp = file_offset;
891 		nwritten = kernel_write(curlun->filp, bh->buf, amount,
892 				&file_offset_tmp);
893 		VLDBG(curlun, "file write %u @ %llu -> %d\n", amount,
894 				(unsigned long long)file_offset, (int)nwritten);
895 		if (signal_pending(current))
896 			return -EINTR;		/* Interrupted! */
897 
898 		if (nwritten < 0) {
899 			LDBG(curlun, "error in file write: %d\n",
900 					(int) nwritten);
901 			nwritten = 0;
902 		} else if (nwritten < amount) {
903 			LDBG(curlun, "partial file write: %d/%u\n",
904 					(int) nwritten, amount);
905 			nwritten = round_down(nwritten, curlun->blksize);
906 		}
907 		file_offset += nwritten;
908 		amount_left_to_write -= nwritten;
909 		common->residue -= nwritten;
910 
911 		/* If an error occurred, report it and its position */
912 		if (nwritten < amount) {
913 			curlun->sense_data = SS_WRITE_ERROR;
914 			curlun->sense_data_info =
915 					file_offset >> curlun->blkbits;
916 			curlun->info_valid = 1;
917 			break;
918 		}
919 
920  empty_write:
921 		/* Did the host decide to stop early? */
922 		if (bh->outreq->actual < bh->bulk_out_intended_length) {
923 			common->short_packet_received = 1;
924 			break;
925 		}
926 	}
927 
928 	return -EIO;		/* No default reply */
929 }
930 
931 
932 /*-------------------------------------------------------------------------*/
933 
934 static int do_synchronize_cache(struct fsg_common *common)
935 {
936 	struct fsg_lun	*curlun = common->curlun;
937 	int		rc;
938 
939 	/* We ignore the requested LBA and write out all file's
940 	 * dirty data buffers. */
941 	rc = fsg_lun_fsync_sub(curlun);
942 	if (rc)
943 		curlun->sense_data = SS_WRITE_ERROR;
944 	return 0;
945 }
946 
947 
948 /*-------------------------------------------------------------------------*/
949 
950 static void invalidate_sub(struct fsg_lun *curlun)
951 {
952 	struct file	*filp = curlun->filp;
953 	struct inode	*inode = file_inode(filp);
954 	unsigned long	rc;
955 
956 	rc = invalidate_mapping_pages(inode->i_mapping, 0, -1);
957 	VLDBG(curlun, "invalidate_mapping_pages -> %ld\n", rc);
958 }
959 
960 static int do_verify(struct fsg_common *common)
961 {
962 	struct fsg_lun		*curlun = common->curlun;
963 	u32			lba;
964 	u32			verification_length;
965 	struct fsg_buffhd	*bh = common->next_buffhd_to_fill;
966 	loff_t			file_offset, file_offset_tmp;
967 	u32			amount_left;
968 	unsigned int		amount;
969 	ssize_t			nread;
970 
971 	/*
972 	 * Get the starting Logical Block Address and check that it's
973 	 * not too big.
974 	 */
975 	lba = get_unaligned_be32(&common->cmnd[2]);
976 	if (lba >= curlun->num_sectors) {
977 		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
978 		return -EINVAL;
979 	}
980 
981 	/*
982 	 * We allow DPO (Disable Page Out = don't save data in the
983 	 * cache) but we don't implement it.
984 	 */
985 	if (common->cmnd[1] & ~0x10) {
986 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
987 		return -EINVAL;
988 	}
989 
990 	verification_length = get_unaligned_be16(&common->cmnd[7]);
991 	if (unlikely(verification_length == 0))
992 		return -EIO;		/* No default reply */
993 
994 	/* Prepare to carry out the file verify */
995 	amount_left = verification_length << curlun->blkbits;
996 	file_offset = ((loff_t) lba) << curlun->blkbits;
997 
998 	/* Write out all the dirty buffers before invalidating them */
999 	fsg_lun_fsync_sub(curlun);
1000 	if (signal_pending(current))
1001 		return -EINTR;
1002 
1003 	invalidate_sub(curlun);
1004 	if (signal_pending(current))
1005 		return -EINTR;
1006 
1007 	/* Just try to read the requested blocks */
1008 	while (amount_left > 0) {
1009 		/*
1010 		 * Figure out how much we need to read:
1011 		 * Try to read the remaining amount, but not more than
1012 		 * the buffer size.
1013 		 * And don't try to read past the end of the file.
1014 		 */
1015 		amount = min(amount_left, FSG_BUFLEN);
1016 		amount = min((loff_t)amount,
1017 			     curlun->file_length - file_offset);
1018 		if (amount == 0) {
1019 			curlun->sense_data =
1020 					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
1021 			curlun->sense_data_info =
1022 				file_offset >> curlun->blkbits;
1023 			curlun->info_valid = 1;
1024 			break;
1025 		}
1026 
1027 		/* Perform the read */
1028 		file_offset_tmp = file_offset;
1029 		nread = kernel_read(curlun->filp, bh->buf, amount,
1030 				&file_offset_tmp);
1031 		VLDBG(curlun, "file read %u @ %llu -> %d\n", amount,
1032 				(unsigned long long) file_offset,
1033 				(int) nread);
1034 		if (signal_pending(current))
1035 			return -EINTR;
1036 
1037 		if (nread < 0) {
1038 			LDBG(curlun, "error in file verify: %d\n", (int)nread);
1039 			nread = 0;
1040 		} else if (nread < amount) {
1041 			LDBG(curlun, "partial file verify: %d/%u\n",
1042 			     (int)nread, amount);
1043 			nread = round_down(nread, curlun->blksize);
1044 		}
1045 		if (nread == 0) {
1046 			curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
1047 			curlun->sense_data_info =
1048 				file_offset >> curlun->blkbits;
1049 			curlun->info_valid = 1;
1050 			break;
1051 		}
1052 		file_offset += nread;
1053 		amount_left -= nread;
1054 	}
1055 	return 0;
1056 }
1057 
1058 
1059 /*-------------------------------------------------------------------------*/
1060 
1061 static int do_inquiry(struct fsg_common *common, struct fsg_buffhd *bh)
1062 {
1063 	struct fsg_lun *curlun = common->curlun;
1064 	u8	*buf = (u8 *) bh->buf;
1065 
1066 	if (!curlun) {		/* Unsupported LUNs are okay */
1067 		common->bad_lun_okay = 1;
1068 		memset(buf, 0, 36);
1069 		buf[0] = TYPE_NO_LUN;	/* Unsupported, no device-type */
1070 		buf[4] = 31;		/* Additional length */
1071 		return 36;
1072 	}
1073 
1074 	buf[0] = curlun->cdrom ? TYPE_ROM : TYPE_DISK;
1075 	buf[1] = curlun->removable ? 0x80 : 0;
1076 	buf[2] = 2;		/* ANSI SCSI level 2 */
1077 	buf[3] = 2;		/* SCSI-2 INQUIRY data format */
1078 	buf[4] = 31;		/* Additional length */
1079 	buf[5] = 0;		/* No special options */
1080 	buf[6] = 0;
1081 	buf[7] = 0;
1082 	if (curlun->inquiry_string[0])
1083 		memcpy(buf + 8, curlun->inquiry_string,
1084 		       sizeof(curlun->inquiry_string));
1085 	else
1086 		memcpy(buf + 8, common->inquiry_string,
1087 		       sizeof(common->inquiry_string));
1088 	return 36;
1089 }
1090 
1091 static int do_request_sense(struct fsg_common *common, struct fsg_buffhd *bh)
1092 {
1093 	struct fsg_lun	*curlun = common->curlun;
1094 	u8		*buf = (u8 *) bh->buf;
1095 	u32		sd, sdinfo;
1096 	int		valid;
1097 
1098 	/*
1099 	 * From the SCSI-2 spec., section 7.9 (Unit attention condition):
1100 	 *
1101 	 * If a REQUEST SENSE command is received from an initiator
1102 	 * with a pending unit attention condition (before the target
1103 	 * generates the contingent allegiance condition), then the
1104 	 * target shall either:
1105 	 *   a) report any pending sense data and preserve the unit
1106 	 *	attention condition on the logical unit, or,
1107 	 *   b) report the unit attention condition, may discard any
1108 	 *	pending sense data, and clear the unit attention
1109 	 *	condition on the logical unit for that initiator.
1110 	 *
1111 	 * FSG normally uses option a); enable this code to use option b).
1112 	 */
1113 #if 0
1114 	if (curlun && curlun->unit_attention_data != SS_NO_SENSE) {
1115 		curlun->sense_data = curlun->unit_attention_data;
1116 		curlun->unit_attention_data = SS_NO_SENSE;
1117 	}
1118 #endif
1119 
1120 	if (!curlun) {		/* Unsupported LUNs are okay */
1121 		common->bad_lun_okay = 1;
1122 		sd = SS_LOGICAL_UNIT_NOT_SUPPORTED;
1123 		sdinfo = 0;
1124 		valid = 0;
1125 	} else {
1126 		sd = curlun->sense_data;
1127 		sdinfo = curlun->sense_data_info;
1128 		valid = curlun->info_valid << 7;
1129 		curlun->sense_data = SS_NO_SENSE;
1130 		curlun->sense_data_info = 0;
1131 		curlun->info_valid = 0;
1132 	}
1133 
1134 	memset(buf, 0, 18);
1135 	buf[0] = valid | 0x70;			/* Valid, current error */
1136 	buf[2] = SK(sd);
1137 	put_unaligned_be32(sdinfo, &buf[3]);	/* Sense information */
1138 	buf[7] = 18 - 8;			/* Additional sense length */
1139 	buf[12] = ASC(sd);
1140 	buf[13] = ASCQ(sd);
1141 	return 18;
1142 }
1143 
1144 static int do_read_capacity(struct fsg_common *common, struct fsg_buffhd *bh)
1145 {
1146 	struct fsg_lun	*curlun = common->curlun;
1147 	u32		lba = get_unaligned_be32(&common->cmnd[2]);
1148 	int		pmi = common->cmnd[8];
1149 	u8		*buf = (u8 *)bh->buf;
1150 
1151 	/* Check the PMI and LBA fields */
1152 	if (pmi > 1 || (pmi == 0 && lba != 0)) {
1153 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1154 		return -EINVAL;
1155 	}
1156 
1157 	put_unaligned_be32(curlun->num_sectors - 1, &buf[0]);
1158 						/* Max logical block */
1159 	put_unaligned_be32(curlun->blksize, &buf[4]);/* Block length */
1160 	return 8;
1161 }
1162 
1163 static int do_read_header(struct fsg_common *common, struct fsg_buffhd *bh)
1164 {
1165 	struct fsg_lun	*curlun = common->curlun;
1166 	int		msf = common->cmnd[1] & 0x02;
1167 	u32		lba = get_unaligned_be32(&common->cmnd[2]);
1168 	u8		*buf = (u8 *)bh->buf;
1169 
1170 	if (common->cmnd[1] & ~0x02) {		/* Mask away MSF */
1171 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1172 		return -EINVAL;
1173 	}
1174 	if (lba >= curlun->num_sectors) {
1175 		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
1176 		return -EINVAL;
1177 	}
1178 
1179 	memset(buf, 0, 8);
1180 	buf[0] = 0x01;		/* 2048 bytes of user data, rest is EC */
1181 	store_cdrom_address(&buf[4], msf, lba);
1182 	return 8;
1183 }
1184 
1185 static int do_read_toc(struct fsg_common *common, struct fsg_buffhd *bh)
1186 {
1187 	struct fsg_lun	*curlun = common->curlun;
1188 	int		msf = common->cmnd[1] & 0x02;
1189 	int		start_track = common->cmnd[6];
1190 	u8		*buf = (u8 *)bh->buf;
1191 
1192 	if ((common->cmnd[1] & ~0x02) != 0 ||	/* Mask away MSF */
1193 			start_track > 1) {
1194 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1195 		return -EINVAL;
1196 	}
1197 
1198 	memset(buf, 0, 20);
1199 	buf[1] = (20-2);		/* TOC data length */
1200 	buf[2] = 1;			/* First track number */
1201 	buf[3] = 1;			/* Last track number */
1202 	buf[5] = 0x16;			/* Data track, copying allowed */
1203 	buf[6] = 0x01;			/* Only track is number 1 */
1204 	store_cdrom_address(&buf[8], msf, 0);
1205 
1206 	buf[13] = 0x16;			/* Lead-out track is data */
1207 	buf[14] = 0xAA;			/* Lead-out track number */
1208 	store_cdrom_address(&buf[16], msf, curlun->num_sectors);
1209 	return 20;
1210 }
1211 
1212 static int do_mode_sense(struct fsg_common *common, struct fsg_buffhd *bh)
1213 {
1214 	struct fsg_lun	*curlun = common->curlun;
1215 	int		mscmnd = common->cmnd[0];
1216 	u8		*buf = (u8 *) bh->buf;
1217 	u8		*buf0 = buf;
1218 	int		pc, page_code;
1219 	int		changeable_values, all_pages;
1220 	int		valid_page = 0;
1221 	int		len, limit;
1222 
1223 	if ((common->cmnd[1] & ~0x08) != 0) {	/* Mask away DBD */
1224 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1225 		return -EINVAL;
1226 	}
1227 	pc = common->cmnd[2] >> 6;
1228 	page_code = common->cmnd[2] & 0x3f;
1229 	if (pc == 3) {
1230 		curlun->sense_data = SS_SAVING_PARAMETERS_NOT_SUPPORTED;
1231 		return -EINVAL;
1232 	}
1233 	changeable_values = (pc == 1);
1234 	all_pages = (page_code == 0x3f);
1235 
1236 	/*
1237 	 * Write the mode parameter header.  Fixed values are: default
1238 	 * medium type, no cache control (DPOFUA), and no block descriptors.
1239 	 * The only variable value is the WriteProtect bit.  We will fill in
1240 	 * the mode data length later.
1241 	 */
1242 	memset(buf, 0, 8);
1243 	if (mscmnd == MODE_SENSE) {
1244 		buf[2] = (curlun->ro ? 0x80 : 0x00);		/* WP, DPOFUA */
1245 		buf += 4;
1246 		limit = 255;
1247 	} else {			/* MODE_SENSE_10 */
1248 		buf[3] = (curlun->ro ? 0x80 : 0x00);		/* WP, DPOFUA */
1249 		buf += 8;
1250 		limit = 65535;		/* Should really be FSG_BUFLEN */
1251 	}
1252 
1253 	/* No block descriptors */
1254 
1255 	/*
1256 	 * The mode pages, in numerical order.  The only page we support
1257 	 * is the Caching page.
1258 	 */
1259 	if (page_code == 0x08 || all_pages) {
1260 		valid_page = 1;
1261 		buf[0] = 0x08;		/* Page code */
1262 		buf[1] = 10;		/* Page length */
1263 		memset(buf+2, 0, 10);	/* None of the fields are changeable */
1264 
1265 		if (!changeable_values) {
1266 			buf[2] = 0x04;	/* Write cache enable, */
1267 					/* Read cache not disabled */
1268 					/* No cache retention priorities */
1269 			put_unaligned_be16(0xffff, &buf[4]);
1270 					/* Don't disable prefetch */
1271 					/* Minimum prefetch = 0 */
1272 			put_unaligned_be16(0xffff, &buf[8]);
1273 					/* Maximum prefetch */
1274 			put_unaligned_be16(0xffff, &buf[10]);
1275 					/* Maximum prefetch ceiling */
1276 		}
1277 		buf += 12;
1278 	}
1279 
1280 	/*
1281 	 * Check that a valid page was requested and the mode data length
1282 	 * isn't too long.
1283 	 */
1284 	len = buf - buf0;
1285 	if (!valid_page || len > limit) {
1286 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1287 		return -EINVAL;
1288 	}
1289 
1290 	/*  Store the mode data length */
1291 	if (mscmnd == MODE_SENSE)
1292 		buf0[0] = len - 1;
1293 	else
1294 		put_unaligned_be16(len - 2, buf0);
1295 	return len;
1296 }
1297 
1298 static int do_start_stop(struct fsg_common *common)
1299 {
1300 	struct fsg_lun	*curlun = common->curlun;
1301 	int		loej, start;
1302 
1303 	if (!curlun) {
1304 		return -EINVAL;
1305 	} else if (!curlun->removable) {
1306 		curlun->sense_data = SS_INVALID_COMMAND;
1307 		return -EINVAL;
1308 	} else if ((common->cmnd[1] & ~0x01) != 0 || /* Mask away Immed */
1309 		   (common->cmnd[4] & ~0x03) != 0) { /* Mask LoEj, Start */
1310 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1311 		return -EINVAL;
1312 	}
1313 
1314 	loej  = common->cmnd[4] & 0x02;
1315 	start = common->cmnd[4] & 0x01;
1316 
1317 	/*
1318 	 * Our emulation doesn't support mounting; the medium is
1319 	 * available for use as soon as it is loaded.
1320 	 */
1321 	if (start) {
1322 		if (!fsg_lun_is_open(curlun)) {
1323 			curlun->sense_data = SS_MEDIUM_NOT_PRESENT;
1324 			return -EINVAL;
1325 		}
1326 		return 0;
1327 	}
1328 
1329 	/* Are we allowed to unload the media? */
1330 	if (curlun->prevent_medium_removal) {
1331 		LDBG(curlun, "unload attempt prevented\n");
1332 		curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED;
1333 		return -EINVAL;
1334 	}
1335 
1336 	if (!loej)
1337 		return 0;
1338 
1339 	up_read(&common->filesem);
1340 	down_write(&common->filesem);
1341 	fsg_lun_close(curlun);
1342 	up_write(&common->filesem);
1343 	down_read(&common->filesem);
1344 
1345 	return 0;
1346 }
1347 
1348 static int do_prevent_allow(struct fsg_common *common)
1349 {
1350 	struct fsg_lun	*curlun = common->curlun;
1351 	int		prevent;
1352 
1353 	if (!common->curlun) {
1354 		return -EINVAL;
1355 	} else if (!common->curlun->removable) {
1356 		common->curlun->sense_data = SS_INVALID_COMMAND;
1357 		return -EINVAL;
1358 	}
1359 
1360 	prevent = common->cmnd[4] & 0x01;
1361 	if ((common->cmnd[4] & ~0x01) != 0) {	/* Mask away Prevent */
1362 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1363 		return -EINVAL;
1364 	}
1365 
1366 	if (curlun->prevent_medium_removal && !prevent)
1367 		fsg_lun_fsync_sub(curlun);
1368 	curlun->prevent_medium_removal = prevent;
1369 	return 0;
1370 }
1371 
1372 static int do_read_format_capacities(struct fsg_common *common,
1373 			struct fsg_buffhd *bh)
1374 {
1375 	struct fsg_lun	*curlun = common->curlun;
1376 	u8		*buf = (u8 *) bh->buf;
1377 
1378 	buf[0] = buf[1] = buf[2] = 0;
1379 	buf[3] = 8;	/* Only the Current/Maximum Capacity Descriptor */
1380 	buf += 4;
1381 
1382 	put_unaligned_be32(curlun->num_sectors, &buf[0]);
1383 						/* Number of blocks */
1384 	put_unaligned_be32(curlun->blksize, &buf[4]);/* Block length */
1385 	buf[4] = 0x02;				/* Current capacity */
1386 	return 12;
1387 }
1388 
1389 static int do_mode_select(struct fsg_common *common, struct fsg_buffhd *bh)
1390 {
1391 	struct fsg_lun	*curlun = common->curlun;
1392 
1393 	/* We don't support MODE SELECT */
1394 	if (curlun)
1395 		curlun->sense_data = SS_INVALID_COMMAND;
1396 	return -EINVAL;
1397 }
1398 
1399 
1400 /*-------------------------------------------------------------------------*/
1401 
1402 static int halt_bulk_in_endpoint(struct fsg_dev *fsg)
1403 {
1404 	int	rc;
1405 
1406 	rc = fsg_set_halt(fsg, fsg->bulk_in);
1407 	if (rc == -EAGAIN)
1408 		VDBG(fsg, "delayed bulk-in endpoint halt\n");
1409 	while (rc != 0) {
1410 		if (rc != -EAGAIN) {
1411 			WARNING(fsg, "usb_ep_set_halt -> %d\n", rc);
1412 			rc = 0;
1413 			break;
1414 		}
1415 
1416 		/* Wait for a short time and then try again */
1417 		if (msleep_interruptible(100) != 0)
1418 			return -EINTR;
1419 		rc = usb_ep_set_halt(fsg->bulk_in);
1420 	}
1421 	return rc;
1422 }
1423 
1424 static int wedge_bulk_in_endpoint(struct fsg_dev *fsg)
1425 {
1426 	int	rc;
1427 
1428 	DBG(fsg, "bulk-in set wedge\n");
1429 	rc = usb_ep_set_wedge(fsg->bulk_in);
1430 	if (rc == -EAGAIN)
1431 		VDBG(fsg, "delayed bulk-in endpoint wedge\n");
1432 	while (rc != 0) {
1433 		if (rc != -EAGAIN) {
1434 			WARNING(fsg, "usb_ep_set_wedge -> %d\n", rc);
1435 			rc = 0;
1436 			break;
1437 		}
1438 
1439 		/* Wait for a short time and then try again */
1440 		if (msleep_interruptible(100) != 0)
1441 			return -EINTR;
1442 		rc = usb_ep_set_wedge(fsg->bulk_in);
1443 	}
1444 	return rc;
1445 }
1446 
1447 static int throw_away_data(struct fsg_common *common)
1448 {
1449 	struct fsg_buffhd	*bh, *bh2;
1450 	u32			amount;
1451 	int			rc;
1452 
1453 	for (bh = common->next_buffhd_to_drain;
1454 	     bh->state != BUF_STATE_EMPTY || common->usb_amount_left > 0;
1455 	     bh = common->next_buffhd_to_drain) {
1456 
1457 		/* Try to submit another request if we need one */
1458 		bh2 = common->next_buffhd_to_fill;
1459 		if (bh2->state == BUF_STATE_EMPTY &&
1460 				common->usb_amount_left > 0) {
1461 			amount = min(common->usb_amount_left, FSG_BUFLEN);
1462 
1463 			/*
1464 			 * Except at the end of the transfer, amount will be
1465 			 * equal to the buffer size, which is divisible by
1466 			 * the bulk-out maxpacket size.
1467 			 */
1468 			set_bulk_out_req_length(common, bh2, amount);
1469 			if (!start_out_transfer(common, bh2))
1470 				/* Dunno what to do if common->fsg is NULL */
1471 				return -EIO;
1472 			common->next_buffhd_to_fill = bh2->next;
1473 			common->usb_amount_left -= amount;
1474 			continue;
1475 		}
1476 
1477 		/* Wait for the data to be received */
1478 		rc = sleep_thread(common, false, bh);
1479 		if (rc)
1480 			return rc;
1481 
1482 		/* Throw away the data in a filled buffer */
1483 		bh->state = BUF_STATE_EMPTY;
1484 		common->next_buffhd_to_drain = bh->next;
1485 
1486 		/* A short packet or an error ends everything */
1487 		if (bh->outreq->actual < bh->bulk_out_intended_length ||
1488 				bh->outreq->status != 0) {
1489 			raise_exception(common, FSG_STATE_ABORT_BULK_OUT);
1490 			return -EINTR;
1491 		}
1492 	}
1493 	return 0;
1494 }
1495 
1496 static int finish_reply(struct fsg_common *common)
1497 {
1498 	struct fsg_buffhd	*bh = common->next_buffhd_to_fill;
1499 	int			rc = 0;
1500 
1501 	switch (common->data_dir) {
1502 	case DATA_DIR_NONE:
1503 		break;			/* Nothing to send */
1504 
1505 	/*
1506 	 * If we don't know whether the host wants to read or write,
1507 	 * this must be CB or CBI with an unknown command.  We mustn't
1508 	 * try to send or receive any data.  So stall both bulk pipes
1509 	 * if we can and wait for a reset.
1510 	 */
1511 	case DATA_DIR_UNKNOWN:
1512 		if (!common->can_stall) {
1513 			/* Nothing */
1514 		} else if (fsg_is_set(common)) {
1515 			fsg_set_halt(common->fsg, common->fsg->bulk_out);
1516 			rc = halt_bulk_in_endpoint(common->fsg);
1517 		} else {
1518 			/* Don't know what to do if common->fsg is NULL */
1519 			rc = -EIO;
1520 		}
1521 		break;
1522 
1523 	/* All but the last buffer of data must have already been sent */
1524 	case DATA_DIR_TO_HOST:
1525 		if (common->data_size == 0) {
1526 			/* Nothing to send */
1527 
1528 		/* Don't know what to do if common->fsg is NULL */
1529 		} else if (!fsg_is_set(common)) {
1530 			rc = -EIO;
1531 
1532 		/* If there's no residue, simply send the last buffer */
1533 		} else if (common->residue == 0) {
1534 			bh->inreq->zero = 0;
1535 			if (!start_in_transfer(common, bh))
1536 				return -EIO;
1537 			common->next_buffhd_to_fill = bh->next;
1538 
1539 		/*
1540 		 * For Bulk-only, mark the end of the data with a short
1541 		 * packet.  If we are allowed to stall, halt the bulk-in
1542 		 * endpoint.  (Note: This violates the Bulk-Only Transport
1543 		 * specification, which requires us to pad the data if we
1544 		 * don't halt the endpoint.  Presumably nobody will mind.)
1545 		 */
1546 		} else {
1547 			bh->inreq->zero = 1;
1548 			if (!start_in_transfer(common, bh))
1549 				rc = -EIO;
1550 			common->next_buffhd_to_fill = bh->next;
1551 			if (common->can_stall)
1552 				rc = halt_bulk_in_endpoint(common->fsg);
1553 		}
1554 		break;
1555 
1556 	/*
1557 	 * We have processed all we want from the data the host has sent.
1558 	 * There may still be outstanding bulk-out requests.
1559 	 */
1560 	case DATA_DIR_FROM_HOST:
1561 		if (common->residue == 0) {
1562 			/* Nothing to receive */
1563 
1564 		/* Did the host stop sending unexpectedly early? */
1565 		} else if (common->short_packet_received) {
1566 			raise_exception(common, FSG_STATE_ABORT_BULK_OUT);
1567 			rc = -EINTR;
1568 
1569 		/*
1570 		 * We haven't processed all the incoming data.  Even though
1571 		 * we may be allowed to stall, doing so would cause a race.
1572 		 * The controller may already have ACK'ed all the remaining
1573 		 * bulk-out packets, in which case the host wouldn't see a
1574 		 * STALL.  Not realizing the endpoint was halted, it wouldn't
1575 		 * clear the halt -- leading to problems later on.
1576 		 */
1577 #if 0
1578 		} else if (common->can_stall) {
1579 			if (fsg_is_set(common))
1580 				fsg_set_halt(common->fsg,
1581 					     common->fsg->bulk_out);
1582 			raise_exception(common, FSG_STATE_ABORT_BULK_OUT);
1583 			rc = -EINTR;
1584 #endif
1585 
1586 		/*
1587 		 * We can't stall.  Read in the excess data and throw it
1588 		 * all away.
1589 		 */
1590 		} else {
1591 			rc = throw_away_data(common);
1592 		}
1593 		break;
1594 	}
1595 	return rc;
1596 }
1597 
1598 static void send_status(struct fsg_common *common)
1599 {
1600 	struct fsg_lun		*curlun = common->curlun;
1601 	struct fsg_buffhd	*bh;
1602 	struct bulk_cs_wrap	*csw;
1603 	int			rc;
1604 	u8			status = US_BULK_STAT_OK;
1605 	u32			sd, sdinfo = 0;
1606 
1607 	/* Wait for the next buffer to become available */
1608 	bh = common->next_buffhd_to_fill;
1609 	rc = sleep_thread(common, false, bh);
1610 	if (rc)
1611 		return;
1612 
1613 	if (curlun) {
1614 		sd = curlun->sense_data;
1615 		sdinfo = curlun->sense_data_info;
1616 	} else if (common->bad_lun_okay)
1617 		sd = SS_NO_SENSE;
1618 	else
1619 		sd = SS_LOGICAL_UNIT_NOT_SUPPORTED;
1620 
1621 	if (common->phase_error) {
1622 		DBG(common, "sending phase-error status\n");
1623 		status = US_BULK_STAT_PHASE;
1624 		sd = SS_INVALID_COMMAND;
1625 	} else if (sd != SS_NO_SENSE) {
1626 		DBG(common, "sending command-failure status\n");
1627 		status = US_BULK_STAT_FAIL;
1628 		VDBG(common, "  sense data: SK x%02x, ASC x%02x, ASCQ x%02x;"
1629 				"  info x%x\n",
1630 				SK(sd), ASC(sd), ASCQ(sd), sdinfo);
1631 	}
1632 
1633 	/* Store and send the Bulk-only CSW */
1634 	csw = (void *)bh->buf;
1635 
1636 	csw->Signature = cpu_to_le32(US_BULK_CS_SIGN);
1637 	csw->Tag = common->tag;
1638 	csw->Residue = cpu_to_le32(common->residue);
1639 	csw->Status = status;
1640 
1641 	bh->inreq->length = US_BULK_CS_WRAP_LEN;
1642 	bh->inreq->zero = 0;
1643 	if (!start_in_transfer(common, bh))
1644 		/* Don't know what to do if common->fsg is NULL */
1645 		return;
1646 
1647 	common->next_buffhd_to_fill = bh->next;
1648 	return;
1649 }
1650 
1651 
1652 /*-------------------------------------------------------------------------*/
1653 
1654 /*
1655  * Check whether the command is properly formed and whether its data size
1656  * and direction agree with the values we already have.
1657  */
1658 static int check_command(struct fsg_common *common, int cmnd_size,
1659 			 enum data_direction data_dir, unsigned int mask,
1660 			 int needs_medium, const char *name)
1661 {
1662 	int			i;
1663 	unsigned int		lun = common->cmnd[1] >> 5;
1664 	static const char	dirletter[4] = {'u', 'o', 'i', 'n'};
1665 	char			hdlen[20];
1666 	struct fsg_lun		*curlun;
1667 
1668 	hdlen[0] = 0;
1669 	if (common->data_dir != DATA_DIR_UNKNOWN)
1670 		sprintf(hdlen, ", H%c=%u", dirletter[(int) common->data_dir],
1671 			common->data_size);
1672 	VDBG(common, "SCSI command: %s;  Dc=%d, D%c=%u;  Hc=%d%s\n",
1673 	     name, cmnd_size, dirletter[(int) data_dir],
1674 	     common->data_size_from_cmnd, common->cmnd_size, hdlen);
1675 
1676 	/*
1677 	 * We can't reply at all until we know the correct data direction
1678 	 * and size.
1679 	 */
1680 	if (common->data_size_from_cmnd == 0)
1681 		data_dir = DATA_DIR_NONE;
1682 	if (common->data_size < common->data_size_from_cmnd) {
1683 		/*
1684 		 * Host data size < Device data size is a phase error.
1685 		 * Carry out the command, but only transfer as much as
1686 		 * we are allowed.
1687 		 */
1688 		common->data_size_from_cmnd = common->data_size;
1689 		common->phase_error = 1;
1690 	}
1691 	common->residue = common->data_size;
1692 	common->usb_amount_left = common->data_size;
1693 
1694 	/* Conflicting data directions is a phase error */
1695 	if (common->data_dir != data_dir && common->data_size_from_cmnd > 0) {
1696 		common->phase_error = 1;
1697 		return -EINVAL;
1698 	}
1699 
1700 	/* Verify the length of the command itself */
1701 	if (cmnd_size != common->cmnd_size) {
1702 
1703 		/*
1704 		 * Special case workaround: There are plenty of buggy SCSI
1705 		 * implementations. Many have issues with cbw->Length
1706 		 * field passing a wrong command size. For those cases we
1707 		 * always try to work around the problem by using the length
1708 		 * sent by the host side provided it is at least as large
1709 		 * as the correct command length.
1710 		 * Examples of such cases would be MS-Windows, which issues
1711 		 * REQUEST SENSE with cbw->Length == 12 where it should
1712 		 * be 6, and xbox360 issuing INQUIRY, TEST UNIT READY and
1713 		 * REQUEST SENSE with cbw->Length == 10 where it should
1714 		 * be 6 as well.
1715 		 */
1716 		if (cmnd_size <= common->cmnd_size) {
1717 			DBG(common, "%s is buggy! Expected length %d "
1718 			    "but we got %d\n", name,
1719 			    cmnd_size, common->cmnd_size);
1720 			cmnd_size = common->cmnd_size;
1721 		} else {
1722 			common->phase_error = 1;
1723 			return -EINVAL;
1724 		}
1725 	}
1726 
1727 	/* Check that the LUN values are consistent */
1728 	if (common->lun != lun)
1729 		DBG(common, "using LUN %u from CBW, not LUN %u from CDB\n",
1730 		    common->lun, lun);
1731 
1732 	/* Check the LUN */
1733 	curlun = common->curlun;
1734 	if (curlun) {
1735 		if (common->cmnd[0] != REQUEST_SENSE) {
1736 			curlun->sense_data = SS_NO_SENSE;
1737 			curlun->sense_data_info = 0;
1738 			curlun->info_valid = 0;
1739 		}
1740 	} else {
1741 		common->bad_lun_okay = 0;
1742 
1743 		/*
1744 		 * INQUIRY and REQUEST SENSE commands are explicitly allowed
1745 		 * to use unsupported LUNs; all others may not.
1746 		 */
1747 		if (common->cmnd[0] != INQUIRY &&
1748 		    common->cmnd[0] != REQUEST_SENSE) {
1749 			DBG(common, "unsupported LUN %u\n", common->lun);
1750 			return -EINVAL;
1751 		}
1752 	}
1753 
1754 	/*
1755 	 * If a unit attention condition exists, only INQUIRY and
1756 	 * REQUEST SENSE commands are allowed; anything else must fail.
1757 	 */
1758 	if (curlun && curlun->unit_attention_data != SS_NO_SENSE &&
1759 	    common->cmnd[0] != INQUIRY &&
1760 	    common->cmnd[0] != REQUEST_SENSE) {
1761 		curlun->sense_data = curlun->unit_attention_data;
1762 		curlun->unit_attention_data = SS_NO_SENSE;
1763 		return -EINVAL;
1764 	}
1765 
1766 	/* Check that only command bytes listed in the mask are non-zero */
1767 	common->cmnd[1] &= 0x1f;			/* Mask away the LUN */
1768 	for (i = 1; i < cmnd_size; ++i) {
1769 		if (common->cmnd[i] && !(mask & (1 << i))) {
1770 			if (curlun)
1771 				curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1772 			return -EINVAL;
1773 		}
1774 	}
1775 
1776 	/* If the medium isn't mounted and the command needs to access
1777 	 * it, return an error. */
1778 	if (curlun && !fsg_lun_is_open(curlun) && needs_medium) {
1779 		curlun->sense_data = SS_MEDIUM_NOT_PRESENT;
1780 		return -EINVAL;
1781 	}
1782 
1783 	return 0;
1784 }
1785 
1786 /* wrapper of check_command for data size in blocks handling */
1787 static int check_command_size_in_blocks(struct fsg_common *common,
1788 		int cmnd_size, enum data_direction data_dir,
1789 		unsigned int mask, int needs_medium, const char *name)
1790 {
1791 	if (common->curlun)
1792 		common->data_size_from_cmnd <<= common->curlun->blkbits;
1793 	return check_command(common, cmnd_size, data_dir,
1794 			mask, needs_medium, name);
1795 }
1796 
1797 static int do_scsi_command(struct fsg_common *common)
1798 {
1799 	struct fsg_buffhd	*bh;
1800 	int			rc;
1801 	int			reply = -EINVAL;
1802 	int			i;
1803 	static char		unknown[16];
1804 
1805 	dump_cdb(common);
1806 
1807 	/* Wait for the next buffer to become available for data or status */
1808 	bh = common->next_buffhd_to_fill;
1809 	common->next_buffhd_to_drain = bh;
1810 	rc = sleep_thread(common, false, bh);
1811 	if (rc)
1812 		return rc;
1813 
1814 	common->phase_error = 0;
1815 	common->short_packet_received = 0;
1816 
1817 	down_read(&common->filesem);	/* We're using the backing file */
1818 	switch (common->cmnd[0]) {
1819 
1820 	case INQUIRY:
1821 		common->data_size_from_cmnd = common->cmnd[4];
1822 		reply = check_command(common, 6, DATA_DIR_TO_HOST,
1823 				      (1<<4), 0,
1824 				      "INQUIRY");
1825 		if (reply == 0)
1826 			reply = do_inquiry(common, bh);
1827 		break;
1828 
1829 	case MODE_SELECT:
1830 		common->data_size_from_cmnd = common->cmnd[4];
1831 		reply = check_command(common, 6, DATA_DIR_FROM_HOST,
1832 				      (1<<1) | (1<<4), 0,
1833 				      "MODE SELECT(6)");
1834 		if (reply == 0)
1835 			reply = do_mode_select(common, bh);
1836 		break;
1837 
1838 	case MODE_SELECT_10:
1839 		common->data_size_from_cmnd =
1840 			get_unaligned_be16(&common->cmnd[7]);
1841 		reply = check_command(common, 10, DATA_DIR_FROM_HOST,
1842 				      (1<<1) | (3<<7), 0,
1843 				      "MODE SELECT(10)");
1844 		if (reply == 0)
1845 			reply = do_mode_select(common, bh);
1846 		break;
1847 
1848 	case MODE_SENSE:
1849 		common->data_size_from_cmnd = common->cmnd[4];
1850 		reply = check_command(common, 6, DATA_DIR_TO_HOST,
1851 				      (1<<1) | (1<<2) | (1<<4), 0,
1852 				      "MODE SENSE(6)");
1853 		if (reply == 0)
1854 			reply = do_mode_sense(common, bh);
1855 		break;
1856 
1857 	case MODE_SENSE_10:
1858 		common->data_size_from_cmnd =
1859 			get_unaligned_be16(&common->cmnd[7]);
1860 		reply = check_command(common, 10, DATA_DIR_TO_HOST,
1861 				      (1<<1) | (1<<2) | (3<<7), 0,
1862 				      "MODE SENSE(10)");
1863 		if (reply == 0)
1864 			reply = do_mode_sense(common, bh);
1865 		break;
1866 
1867 	case ALLOW_MEDIUM_REMOVAL:
1868 		common->data_size_from_cmnd = 0;
1869 		reply = check_command(common, 6, DATA_DIR_NONE,
1870 				      (1<<4), 0,
1871 				      "PREVENT-ALLOW MEDIUM REMOVAL");
1872 		if (reply == 0)
1873 			reply = do_prevent_allow(common);
1874 		break;
1875 
1876 	case READ_6:
1877 		i = common->cmnd[4];
1878 		common->data_size_from_cmnd = (i == 0) ? 256 : i;
1879 		reply = check_command_size_in_blocks(common, 6,
1880 				      DATA_DIR_TO_HOST,
1881 				      (7<<1) | (1<<4), 1,
1882 				      "READ(6)");
1883 		if (reply == 0)
1884 			reply = do_read(common);
1885 		break;
1886 
1887 	case READ_10:
1888 		common->data_size_from_cmnd =
1889 				get_unaligned_be16(&common->cmnd[7]);
1890 		reply = check_command_size_in_blocks(common, 10,
1891 				      DATA_DIR_TO_HOST,
1892 				      (1<<1) | (0xf<<2) | (3<<7), 1,
1893 				      "READ(10)");
1894 		if (reply == 0)
1895 			reply = do_read(common);
1896 		break;
1897 
1898 	case READ_12:
1899 		common->data_size_from_cmnd =
1900 				get_unaligned_be32(&common->cmnd[6]);
1901 		reply = check_command_size_in_blocks(common, 12,
1902 				      DATA_DIR_TO_HOST,
1903 				      (1<<1) | (0xf<<2) | (0xf<<6), 1,
1904 				      "READ(12)");
1905 		if (reply == 0)
1906 			reply = do_read(common);
1907 		break;
1908 
1909 	case READ_CAPACITY:
1910 		common->data_size_from_cmnd = 8;
1911 		reply = check_command(common, 10, DATA_DIR_TO_HOST,
1912 				      (0xf<<2) | (1<<8), 1,
1913 				      "READ CAPACITY");
1914 		if (reply == 0)
1915 			reply = do_read_capacity(common, bh);
1916 		break;
1917 
1918 	case READ_HEADER:
1919 		if (!common->curlun || !common->curlun->cdrom)
1920 			goto unknown_cmnd;
1921 		common->data_size_from_cmnd =
1922 			get_unaligned_be16(&common->cmnd[7]);
1923 		reply = check_command(common, 10, DATA_DIR_TO_HOST,
1924 				      (3<<7) | (0x1f<<1), 1,
1925 				      "READ HEADER");
1926 		if (reply == 0)
1927 			reply = do_read_header(common, bh);
1928 		break;
1929 
1930 	case READ_TOC:
1931 		if (!common->curlun || !common->curlun->cdrom)
1932 			goto unknown_cmnd;
1933 		common->data_size_from_cmnd =
1934 			get_unaligned_be16(&common->cmnd[7]);
1935 		reply = check_command(common, 10, DATA_DIR_TO_HOST,
1936 				      (7<<6) | (1<<1), 1,
1937 				      "READ TOC");
1938 		if (reply == 0)
1939 			reply = do_read_toc(common, bh);
1940 		break;
1941 
1942 	case READ_FORMAT_CAPACITIES:
1943 		common->data_size_from_cmnd =
1944 			get_unaligned_be16(&common->cmnd[7]);
1945 		reply = check_command(common, 10, DATA_DIR_TO_HOST,
1946 				      (3<<7), 1,
1947 				      "READ FORMAT CAPACITIES");
1948 		if (reply == 0)
1949 			reply = do_read_format_capacities(common, bh);
1950 		break;
1951 
1952 	case REQUEST_SENSE:
1953 		common->data_size_from_cmnd = common->cmnd[4];
1954 		reply = check_command(common, 6, DATA_DIR_TO_HOST,
1955 				      (1<<4), 0,
1956 				      "REQUEST SENSE");
1957 		if (reply == 0)
1958 			reply = do_request_sense(common, bh);
1959 		break;
1960 
1961 	case START_STOP:
1962 		common->data_size_from_cmnd = 0;
1963 		reply = check_command(common, 6, DATA_DIR_NONE,
1964 				      (1<<1) | (1<<4), 0,
1965 				      "START-STOP UNIT");
1966 		if (reply == 0)
1967 			reply = do_start_stop(common);
1968 		break;
1969 
1970 	case SYNCHRONIZE_CACHE:
1971 		common->data_size_from_cmnd = 0;
1972 		reply = check_command(common, 10, DATA_DIR_NONE,
1973 				      (0xf<<2) | (3<<7), 1,
1974 				      "SYNCHRONIZE CACHE");
1975 		if (reply == 0)
1976 			reply = do_synchronize_cache(common);
1977 		break;
1978 
1979 	case TEST_UNIT_READY:
1980 		common->data_size_from_cmnd = 0;
1981 		reply = check_command(common, 6, DATA_DIR_NONE,
1982 				0, 1,
1983 				"TEST UNIT READY");
1984 		break;
1985 
1986 	/*
1987 	 * Although optional, this command is used by MS-Windows.  We
1988 	 * support a minimal version: BytChk must be 0.
1989 	 */
1990 	case VERIFY:
1991 		common->data_size_from_cmnd = 0;
1992 		reply = check_command(common, 10, DATA_DIR_NONE,
1993 				      (1<<1) | (0xf<<2) | (3<<7), 1,
1994 				      "VERIFY");
1995 		if (reply == 0)
1996 			reply = do_verify(common);
1997 		break;
1998 
1999 	case WRITE_6:
2000 		i = common->cmnd[4];
2001 		common->data_size_from_cmnd = (i == 0) ? 256 : i;
2002 		reply = check_command_size_in_blocks(common, 6,
2003 				      DATA_DIR_FROM_HOST,
2004 				      (7<<1) | (1<<4), 1,
2005 				      "WRITE(6)");
2006 		if (reply == 0)
2007 			reply = do_write(common);
2008 		break;
2009 
2010 	case WRITE_10:
2011 		common->data_size_from_cmnd =
2012 				get_unaligned_be16(&common->cmnd[7]);
2013 		reply = check_command_size_in_blocks(common, 10,
2014 				      DATA_DIR_FROM_HOST,
2015 				      (1<<1) | (0xf<<2) | (3<<7), 1,
2016 				      "WRITE(10)");
2017 		if (reply == 0)
2018 			reply = do_write(common);
2019 		break;
2020 
2021 	case WRITE_12:
2022 		common->data_size_from_cmnd =
2023 				get_unaligned_be32(&common->cmnd[6]);
2024 		reply = check_command_size_in_blocks(common, 12,
2025 				      DATA_DIR_FROM_HOST,
2026 				      (1<<1) | (0xf<<2) | (0xf<<6), 1,
2027 				      "WRITE(12)");
2028 		if (reply == 0)
2029 			reply = do_write(common);
2030 		break;
2031 
2032 	/*
2033 	 * Some mandatory commands that we recognize but don't implement.
2034 	 * They don't mean much in this setting.  It's left as an exercise
2035 	 * for anyone interested to implement RESERVE and RELEASE in terms
2036 	 * of Posix locks.
2037 	 */
2038 	case FORMAT_UNIT:
2039 	case RELEASE:
2040 	case RESERVE:
2041 	case SEND_DIAGNOSTIC:
2042 		fallthrough;
2043 
2044 	default:
2045 unknown_cmnd:
2046 		common->data_size_from_cmnd = 0;
2047 		sprintf(unknown, "Unknown x%02x", common->cmnd[0]);
2048 		reply = check_command(common, common->cmnd_size,
2049 				      DATA_DIR_UNKNOWN, ~0, 0, unknown);
2050 		if (reply == 0) {
2051 			common->curlun->sense_data = SS_INVALID_COMMAND;
2052 			reply = -EINVAL;
2053 		}
2054 		break;
2055 	}
2056 	up_read(&common->filesem);
2057 
2058 	if (reply == -EINTR || signal_pending(current))
2059 		return -EINTR;
2060 
2061 	/* Set up the single reply buffer for finish_reply() */
2062 	if (reply == -EINVAL)
2063 		reply = 0;		/* Error reply length */
2064 	if (reply >= 0 && common->data_dir == DATA_DIR_TO_HOST) {
2065 		reply = min((u32)reply, common->data_size_from_cmnd);
2066 		bh->inreq->length = reply;
2067 		bh->state = BUF_STATE_FULL;
2068 		common->residue -= reply;
2069 	}				/* Otherwise it's already set */
2070 
2071 	return 0;
2072 }
2073 
2074 
2075 /*-------------------------------------------------------------------------*/
2076 
2077 static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
2078 {
2079 	struct usb_request	*req = bh->outreq;
2080 	struct bulk_cb_wrap	*cbw = req->buf;
2081 	struct fsg_common	*common = fsg->common;
2082 
2083 	/* Was this a real packet?  Should it be ignored? */
2084 	if (req->status || test_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags))
2085 		return -EINVAL;
2086 
2087 	/* Is the CBW valid? */
2088 	if (req->actual != US_BULK_CB_WRAP_LEN ||
2089 			cbw->Signature != cpu_to_le32(
2090 				US_BULK_CB_SIGN)) {
2091 		DBG(fsg, "invalid CBW: len %u sig 0x%x\n",
2092 				req->actual,
2093 				le32_to_cpu(cbw->Signature));
2094 
2095 		/*
2096 		 * The Bulk-only spec says we MUST stall the IN endpoint
2097 		 * (6.6.1), so it's unavoidable.  It also says we must
2098 		 * retain this state until the next reset, but there's
2099 		 * no way to tell the controller driver it should ignore
2100 		 * Clear-Feature(HALT) requests.
2101 		 *
2102 		 * We aren't required to halt the OUT endpoint; instead
2103 		 * we can simply accept and discard any data received
2104 		 * until the next reset.
2105 		 */
2106 		wedge_bulk_in_endpoint(fsg);
2107 		set_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
2108 		return -EINVAL;
2109 	}
2110 
2111 	/* Is the CBW meaningful? */
2112 	if (cbw->Lun >= ARRAY_SIZE(common->luns) ||
2113 	    cbw->Flags & ~US_BULK_FLAG_IN || cbw->Length <= 0 ||
2114 	    cbw->Length > MAX_COMMAND_SIZE) {
2115 		DBG(fsg, "non-meaningful CBW: lun = %u, flags = 0x%x, "
2116 				"cmdlen %u\n",
2117 				cbw->Lun, cbw->Flags, cbw->Length);
2118 
2119 		/*
2120 		 * We can do anything we want here, so let's stall the
2121 		 * bulk pipes if we are allowed to.
2122 		 */
2123 		if (common->can_stall) {
2124 			fsg_set_halt(fsg, fsg->bulk_out);
2125 			halt_bulk_in_endpoint(fsg);
2126 		}
2127 		return -EINVAL;
2128 	}
2129 
2130 	/* Save the command for later */
2131 	common->cmnd_size = cbw->Length;
2132 	memcpy(common->cmnd, cbw->CDB, common->cmnd_size);
2133 	if (cbw->Flags & US_BULK_FLAG_IN)
2134 		common->data_dir = DATA_DIR_TO_HOST;
2135 	else
2136 		common->data_dir = DATA_DIR_FROM_HOST;
2137 	common->data_size = le32_to_cpu(cbw->DataTransferLength);
2138 	if (common->data_size == 0)
2139 		common->data_dir = DATA_DIR_NONE;
2140 	common->lun = cbw->Lun;
2141 	if (common->lun < ARRAY_SIZE(common->luns))
2142 		common->curlun = common->luns[common->lun];
2143 	else
2144 		common->curlun = NULL;
2145 	common->tag = cbw->Tag;
2146 	return 0;
2147 }
2148 
2149 static int get_next_command(struct fsg_common *common)
2150 {
2151 	struct fsg_buffhd	*bh;
2152 	int			rc = 0;
2153 
2154 	/* Wait for the next buffer to become available */
2155 	bh = common->next_buffhd_to_fill;
2156 	rc = sleep_thread(common, true, bh);
2157 	if (rc)
2158 		return rc;
2159 
2160 	/* Queue a request to read a Bulk-only CBW */
2161 	set_bulk_out_req_length(common, bh, US_BULK_CB_WRAP_LEN);
2162 	if (!start_out_transfer(common, bh))
2163 		/* Don't know what to do if common->fsg is NULL */
2164 		return -EIO;
2165 
2166 	/*
2167 	 * We will drain the buffer in software, which means we
2168 	 * can reuse it for the next filling.  No need to advance
2169 	 * next_buffhd_to_fill.
2170 	 */
2171 
2172 	/* Wait for the CBW to arrive */
2173 	rc = sleep_thread(common, true, bh);
2174 	if (rc)
2175 		return rc;
2176 
2177 	rc = fsg_is_set(common) ? received_cbw(common->fsg, bh) : -EIO;
2178 	bh->state = BUF_STATE_EMPTY;
2179 
2180 	return rc;
2181 }
2182 
2183 
2184 /*-------------------------------------------------------------------------*/
2185 
2186 static int alloc_request(struct fsg_common *common, struct usb_ep *ep,
2187 		struct usb_request **preq)
2188 {
2189 	*preq = usb_ep_alloc_request(ep, GFP_ATOMIC);
2190 	if (*preq)
2191 		return 0;
2192 	ERROR(common, "can't allocate request for %s\n", ep->name);
2193 	return -ENOMEM;
2194 }
2195 
2196 /* Reset interface setting and re-init endpoint state (toggle etc). */
2197 static int do_set_interface(struct fsg_common *common, struct fsg_dev *new_fsg)
2198 {
2199 	struct fsg_dev *fsg;
2200 	int i, rc = 0;
2201 
2202 	if (common->running)
2203 		DBG(common, "reset interface\n");
2204 
2205 reset:
2206 	/* Deallocate the requests */
2207 	if (common->fsg) {
2208 		fsg = common->fsg;
2209 
2210 		for (i = 0; i < common->fsg_num_buffers; ++i) {
2211 			struct fsg_buffhd *bh = &common->buffhds[i];
2212 
2213 			if (bh->inreq) {
2214 				usb_ep_free_request(fsg->bulk_in, bh->inreq);
2215 				bh->inreq = NULL;
2216 			}
2217 			if (bh->outreq) {
2218 				usb_ep_free_request(fsg->bulk_out, bh->outreq);
2219 				bh->outreq = NULL;
2220 			}
2221 		}
2222 
2223 		/* Disable the endpoints */
2224 		if (fsg->bulk_in_enabled) {
2225 			usb_ep_disable(fsg->bulk_in);
2226 			fsg->bulk_in_enabled = 0;
2227 		}
2228 		if (fsg->bulk_out_enabled) {
2229 			usb_ep_disable(fsg->bulk_out);
2230 			fsg->bulk_out_enabled = 0;
2231 		}
2232 
2233 		common->fsg = NULL;
2234 		wake_up(&common->fsg_wait);
2235 	}
2236 
2237 	common->running = 0;
2238 	if (!new_fsg || rc)
2239 		return rc;
2240 
2241 	common->fsg = new_fsg;
2242 	fsg = common->fsg;
2243 
2244 	/* Enable the endpoints */
2245 	rc = config_ep_by_speed(common->gadget, &(fsg->function), fsg->bulk_in);
2246 	if (rc)
2247 		goto reset;
2248 	rc = usb_ep_enable(fsg->bulk_in);
2249 	if (rc)
2250 		goto reset;
2251 	fsg->bulk_in->driver_data = common;
2252 	fsg->bulk_in_enabled = 1;
2253 
2254 	rc = config_ep_by_speed(common->gadget, &(fsg->function),
2255 				fsg->bulk_out);
2256 	if (rc)
2257 		goto reset;
2258 	rc = usb_ep_enable(fsg->bulk_out);
2259 	if (rc)
2260 		goto reset;
2261 	fsg->bulk_out->driver_data = common;
2262 	fsg->bulk_out_enabled = 1;
2263 	common->bulk_out_maxpacket = usb_endpoint_maxp(fsg->bulk_out->desc);
2264 	clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
2265 
2266 	/* Allocate the requests */
2267 	for (i = 0; i < common->fsg_num_buffers; ++i) {
2268 		struct fsg_buffhd	*bh = &common->buffhds[i];
2269 
2270 		rc = alloc_request(common, fsg->bulk_in, &bh->inreq);
2271 		if (rc)
2272 			goto reset;
2273 		rc = alloc_request(common, fsg->bulk_out, &bh->outreq);
2274 		if (rc)
2275 			goto reset;
2276 		bh->inreq->buf = bh->outreq->buf = bh->buf;
2277 		bh->inreq->context = bh->outreq->context = bh;
2278 		bh->inreq->complete = bulk_in_complete;
2279 		bh->outreq->complete = bulk_out_complete;
2280 	}
2281 
2282 	common->running = 1;
2283 	for (i = 0; i < ARRAY_SIZE(common->luns); ++i)
2284 		if (common->luns[i])
2285 			common->luns[i]->unit_attention_data =
2286 				SS_RESET_OCCURRED;
2287 	return rc;
2288 }
2289 
2290 
2291 /****************************** ALT CONFIGS ******************************/
2292 
2293 static int fsg_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
2294 {
2295 	struct fsg_dev *fsg = fsg_from_func(f);
2296 
2297 	__raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE, fsg);
2298 	return USB_GADGET_DELAYED_STATUS;
2299 }
2300 
2301 static void fsg_disable(struct usb_function *f)
2302 {
2303 	struct fsg_dev *fsg = fsg_from_func(f);
2304 
2305 	__raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE, NULL);
2306 }
2307 
2308 
2309 /*-------------------------------------------------------------------------*/
2310 
2311 static void handle_exception(struct fsg_common *common)
2312 {
2313 	int			i;
2314 	struct fsg_buffhd	*bh;
2315 	enum fsg_state		old_state;
2316 	struct fsg_lun		*curlun;
2317 	unsigned int		exception_req_tag;
2318 	struct fsg_dev		*new_fsg;
2319 
2320 	/*
2321 	 * Clear the existing signals.  Anything but SIGUSR1 is converted
2322 	 * into a high-priority EXIT exception.
2323 	 */
2324 	for (;;) {
2325 		int sig = kernel_dequeue_signal();
2326 		if (!sig)
2327 			break;
2328 		if (sig != SIGUSR1) {
2329 			spin_lock_irq(&common->lock);
2330 			if (common->state < FSG_STATE_EXIT)
2331 				DBG(common, "Main thread exiting on signal\n");
2332 			common->state = FSG_STATE_EXIT;
2333 			spin_unlock_irq(&common->lock);
2334 		}
2335 	}
2336 
2337 	/* Cancel all the pending transfers */
2338 	if (likely(common->fsg)) {
2339 		for (i = 0; i < common->fsg_num_buffers; ++i) {
2340 			bh = &common->buffhds[i];
2341 			if (bh->state == BUF_STATE_SENDING)
2342 				usb_ep_dequeue(common->fsg->bulk_in, bh->inreq);
2343 			if (bh->state == BUF_STATE_RECEIVING)
2344 				usb_ep_dequeue(common->fsg->bulk_out,
2345 					       bh->outreq);
2346 
2347 			/* Wait for a transfer to become idle */
2348 			if (sleep_thread(common, false, bh))
2349 				return;
2350 		}
2351 
2352 		/* Clear out the controller's fifos */
2353 		if (common->fsg->bulk_in_enabled)
2354 			usb_ep_fifo_flush(common->fsg->bulk_in);
2355 		if (common->fsg->bulk_out_enabled)
2356 			usb_ep_fifo_flush(common->fsg->bulk_out);
2357 	}
2358 
2359 	/*
2360 	 * Reset the I/O buffer states and pointers, the SCSI
2361 	 * state, and the exception.  Then invoke the handler.
2362 	 */
2363 	spin_lock_irq(&common->lock);
2364 
2365 	for (i = 0; i < common->fsg_num_buffers; ++i) {
2366 		bh = &common->buffhds[i];
2367 		bh->state = BUF_STATE_EMPTY;
2368 	}
2369 	common->next_buffhd_to_fill = &common->buffhds[0];
2370 	common->next_buffhd_to_drain = &common->buffhds[0];
2371 	exception_req_tag = common->exception_req_tag;
2372 	new_fsg = common->exception_arg;
2373 	old_state = common->state;
2374 	common->state = FSG_STATE_NORMAL;
2375 
2376 	if (old_state != FSG_STATE_ABORT_BULK_OUT) {
2377 		for (i = 0; i < ARRAY_SIZE(common->luns); ++i) {
2378 			curlun = common->luns[i];
2379 			if (!curlun)
2380 				continue;
2381 			curlun->prevent_medium_removal = 0;
2382 			curlun->sense_data = SS_NO_SENSE;
2383 			curlun->unit_attention_data = SS_NO_SENSE;
2384 			curlun->sense_data_info = 0;
2385 			curlun->info_valid = 0;
2386 		}
2387 	}
2388 	spin_unlock_irq(&common->lock);
2389 
2390 	/* Carry out any extra actions required for the exception */
2391 	switch (old_state) {
2392 	case FSG_STATE_NORMAL:
2393 		break;
2394 
2395 	case FSG_STATE_ABORT_BULK_OUT:
2396 		send_status(common);
2397 		break;
2398 
2399 	case FSG_STATE_PROTOCOL_RESET:
2400 		/*
2401 		 * In case we were forced against our will to halt a
2402 		 * bulk endpoint, clear the halt now.  (The SuperH UDC
2403 		 * requires this.)
2404 		 */
2405 		if (!fsg_is_set(common))
2406 			break;
2407 		if (test_and_clear_bit(IGNORE_BULK_OUT,
2408 				       &common->fsg->atomic_bitflags))
2409 			usb_ep_clear_halt(common->fsg->bulk_in);
2410 
2411 		if (common->ep0_req_tag == exception_req_tag)
2412 			ep0_queue(common);	/* Complete the status stage */
2413 
2414 		/*
2415 		 * Technically this should go here, but it would only be
2416 		 * a waste of time.  Ditto for the INTERFACE_CHANGE and
2417 		 * CONFIG_CHANGE cases.
2418 		 */
2419 		/* for (i = 0; i < common->ARRAY_SIZE(common->luns); ++i) */
2420 		/*	if (common->luns[i]) */
2421 		/*		common->luns[i]->unit_attention_data = */
2422 		/*			SS_RESET_OCCURRED;  */
2423 		break;
2424 
2425 	case FSG_STATE_CONFIG_CHANGE:
2426 		do_set_interface(common, new_fsg);
2427 		if (new_fsg)
2428 			usb_composite_setup_continue(common->cdev);
2429 		break;
2430 
2431 	case FSG_STATE_EXIT:
2432 		do_set_interface(common, NULL);		/* Free resources */
2433 		spin_lock_irq(&common->lock);
2434 		common->state = FSG_STATE_TERMINATED;	/* Stop the thread */
2435 		spin_unlock_irq(&common->lock);
2436 		break;
2437 
2438 	case FSG_STATE_TERMINATED:
2439 		break;
2440 	}
2441 }
2442 
2443 
2444 /*-------------------------------------------------------------------------*/
2445 
2446 static int fsg_main_thread(void *common_)
2447 {
2448 	struct fsg_common	*common = common_;
2449 	int			i;
2450 
2451 	/*
2452 	 * Allow the thread to be killed by a signal, but set the signal mask
2453 	 * to block everything but INT, TERM, KILL, and USR1.
2454 	 */
2455 	allow_signal(SIGINT);
2456 	allow_signal(SIGTERM);
2457 	allow_signal(SIGKILL);
2458 	allow_signal(SIGUSR1);
2459 
2460 	/* Allow the thread to be frozen */
2461 	set_freezable();
2462 
2463 	/* The main loop */
2464 	while (common->state != FSG_STATE_TERMINATED) {
2465 		if (exception_in_progress(common) || signal_pending(current)) {
2466 			handle_exception(common);
2467 			continue;
2468 		}
2469 
2470 		if (!common->running) {
2471 			sleep_thread(common, true, NULL);
2472 			continue;
2473 		}
2474 
2475 		if (get_next_command(common) || exception_in_progress(common))
2476 			continue;
2477 		if (do_scsi_command(common) || exception_in_progress(common))
2478 			continue;
2479 		if (finish_reply(common) || exception_in_progress(common))
2480 			continue;
2481 		send_status(common);
2482 	}
2483 
2484 	spin_lock_irq(&common->lock);
2485 	common->thread_task = NULL;
2486 	spin_unlock_irq(&common->lock);
2487 
2488 	/* Eject media from all LUNs */
2489 
2490 	down_write(&common->filesem);
2491 	for (i = 0; i < ARRAY_SIZE(common->luns); i++) {
2492 		struct fsg_lun *curlun = common->luns[i];
2493 
2494 		if (curlun && fsg_lun_is_open(curlun))
2495 			fsg_lun_close(curlun);
2496 	}
2497 	up_write(&common->filesem);
2498 
2499 	/* Let fsg_unbind() know the thread has exited */
2500 	complete_and_exit(&common->thread_notifier, 0);
2501 }
2502 
2503 
2504 /*************************** DEVICE ATTRIBUTES ***************************/
2505 
2506 static ssize_t ro_show(struct device *dev, struct device_attribute *attr, char *buf)
2507 {
2508 	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
2509 
2510 	return fsg_show_ro(curlun, buf);
2511 }
2512 
2513 static ssize_t nofua_show(struct device *dev, struct device_attribute *attr,
2514 			  char *buf)
2515 {
2516 	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
2517 
2518 	return fsg_show_nofua(curlun, buf);
2519 }
2520 
2521 static ssize_t file_show(struct device *dev, struct device_attribute *attr,
2522 			 char *buf)
2523 {
2524 	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
2525 	struct rw_semaphore	*filesem = dev_get_drvdata(dev);
2526 
2527 	return fsg_show_file(curlun, filesem, buf);
2528 }
2529 
2530 static ssize_t ro_store(struct device *dev, struct device_attribute *attr,
2531 			const char *buf, size_t count)
2532 {
2533 	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
2534 	struct rw_semaphore	*filesem = dev_get_drvdata(dev);
2535 
2536 	return fsg_store_ro(curlun, filesem, buf, count);
2537 }
2538 
2539 static ssize_t nofua_store(struct device *dev, struct device_attribute *attr,
2540 			   const char *buf, size_t count)
2541 {
2542 	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
2543 
2544 	return fsg_store_nofua(curlun, buf, count);
2545 }
2546 
2547 static ssize_t file_store(struct device *dev, struct device_attribute *attr,
2548 			  const char *buf, size_t count)
2549 {
2550 	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
2551 	struct rw_semaphore	*filesem = dev_get_drvdata(dev);
2552 
2553 	return fsg_store_file(curlun, filesem, buf, count);
2554 }
2555 
2556 static DEVICE_ATTR_RW(nofua);
2557 /* mode wil be set in fsg_lun_attr_is_visible() */
2558 static DEVICE_ATTR(ro, 0, ro_show, ro_store);
2559 static DEVICE_ATTR(file, 0, file_show, file_store);
2560 
2561 /****************************** FSG COMMON ******************************/
2562 
2563 static void fsg_lun_release(struct device *dev)
2564 {
2565 	/* Nothing needs to be done */
2566 }
2567 
2568 static struct fsg_common *fsg_common_setup(struct fsg_common *common)
2569 {
2570 	if (!common) {
2571 		common = kzalloc(sizeof(*common), GFP_KERNEL);
2572 		if (!common)
2573 			return ERR_PTR(-ENOMEM);
2574 		common->free_storage_on_release = 1;
2575 	} else {
2576 		common->free_storage_on_release = 0;
2577 	}
2578 	init_rwsem(&common->filesem);
2579 	spin_lock_init(&common->lock);
2580 	init_completion(&common->thread_notifier);
2581 	init_waitqueue_head(&common->io_wait);
2582 	init_waitqueue_head(&common->fsg_wait);
2583 	common->state = FSG_STATE_TERMINATED;
2584 	memset(common->luns, 0, sizeof(common->luns));
2585 
2586 	return common;
2587 }
2588 
2589 void fsg_common_set_sysfs(struct fsg_common *common, bool sysfs)
2590 {
2591 	common->sysfs = sysfs;
2592 }
2593 EXPORT_SYMBOL_GPL(fsg_common_set_sysfs);
2594 
2595 static void _fsg_common_free_buffers(struct fsg_buffhd *buffhds, unsigned n)
2596 {
2597 	if (buffhds) {
2598 		struct fsg_buffhd *bh = buffhds;
2599 		while (n--) {
2600 			kfree(bh->buf);
2601 			++bh;
2602 		}
2603 		kfree(buffhds);
2604 	}
2605 }
2606 
2607 int fsg_common_set_num_buffers(struct fsg_common *common, unsigned int n)
2608 {
2609 	struct fsg_buffhd *bh, *buffhds;
2610 	int i;
2611 
2612 	buffhds = kcalloc(n, sizeof(*buffhds), GFP_KERNEL);
2613 	if (!buffhds)
2614 		return -ENOMEM;
2615 
2616 	/* Data buffers cyclic list */
2617 	bh = buffhds;
2618 	i = n;
2619 	goto buffhds_first_it;
2620 	do {
2621 		bh->next = bh + 1;
2622 		++bh;
2623 buffhds_first_it:
2624 		bh->buf = kmalloc(FSG_BUFLEN, GFP_KERNEL);
2625 		if (unlikely(!bh->buf))
2626 			goto error_release;
2627 	} while (--i);
2628 	bh->next = buffhds;
2629 
2630 	_fsg_common_free_buffers(common->buffhds, common->fsg_num_buffers);
2631 	common->fsg_num_buffers = n;
2632 	common->buffhds = buffhds;
2633 
2634 	return 0;
2635 
2636 error_release:
2637 	/*
2638 	 * "buf"s pointed to by heads after n - i are NULL
2639 	 * so releasing them won't hurt
2640 	 */
2641 	_fsg_common_free_buffers(buffhds, n);
2642 
2643 	return -ENOMEM;
2644 }
2645 EXPORT_SYMBOL_GPL(fsg_common_set_num_buffers);
2646 
2647 void fsg_common_remove_lun(struct fsg_lun *lun)
2648 {
2649 	if (device_is_registered(&lun->dev))
2650 		device_unregister(&lun->dev);
2651 	fsg_lun_close(lun);
2652 	kfree(lun);
2653 }
2654 EXPORT_SYMBOL_GPL(fsg_common_remove_lun);
2655 
2656 static void _fsg_common_remove_luns(struct fsg_common *common, int n)
2657 {
2658 	int i;
2659 
2660 	for (i = 0; i < n; ++i)
2661 		if (common->luns[i]) {
2662 			fsg_common_remove_lun(common->luns[i]);
2663 			common->luns[i] = NULL;
2664 		}
2665 }
2666 
2667 void fsg_common_remove_luns(struct fsg_common *common)
2668 {
2669 	_fsg_common_remove_luns(common, ARRAY_SIZE(common->luns));
2670 }
2671 EXPORT_SYMBOL_GPL(fsg_common_remove_luns);
2672 
2673 void fsg_common_free_buffers(struct fsg_common *common)
2674 {
2675 	_fsg_common_free_buffers(common->buffhds, common->fsg_num_buffers);
2676 	common->buffhds = NULL;
2677 }
2678 EXPORT_SYMBOL_GPL(fsg_common_free_buffers);
2679 
2680 int fsg_common_set_cdev(struct fsg_common *common,
2681 			 struct usb_composite_dev *cdev, bool can_stall)
2682 {
2683 	struct usb_string *us;
2684 
2685 	common->gadget = cdev->gadget;
2686 	common->ep0 = cdev->gadget->ep0;
2687 	common->ep0req = cdev->req;
2688 	common->cdev = cdev;
2689 
2690 	us = usb_gstrings_attach(cdev, fsg_strings_array,
2691 				 ARRAY_SIZE(fsg_strings));
2692 	if (IS_ERR(us))
2693 		return PTR_ERR(us);
2694 
2695 	fsg_intf_desc.iInterface = us[FSG_STRING_INTERFACE].id;
2696 
2697 	/*
2698 	 * Some peripheral controllers are known not to be able to
2699 	 * halt bulk endpoints correctly.  If one of them is present,
2700 	 * disable stalls.
2701 	 */
2702 	common->can_stall = can_stall &&
2703 			gadget_is_stall_supported(common->gadget);
2704 
2705 	return 0;
2706 }
2707 EXPORT_SYMBOL_GPL(fsg_common_set_cdev);
2708 
2709 static struct attribute *fsg_lun_dev_attrs[] = {
2710 	&dev_attr_ro.attr,
2711 	&dev_attr_file.attr,
2712 	&dev_attr_nofua.attr,
2713 	NULL
2714 };
2715 
2716 static umode_t fsg_lun_dev_is_visible(struct kobject *kobj,
2717 				      struct attribute *attr, int idx)
2718 {
2719 	struct device *dev = kobj_to_dev(kobj);
2720 	struct fsg_lun *lun = fsg_lun_from_dev(dev);
2721 
2722 	if (attr == &dev_attr_ro.attr)
2723 		return lun->cdrom ? S_IRUGO : (S_IWUSR | S_IRUGO);
2724 	if (attr == &dev_attr_file.attr)
2725 		return lun->removable ? (S_IWUSR | S_IRUGO) : S_IRUGO;
2726 	return attr->mode;
2727 }
2728 
2729 static const struct attribute_group fsg_lun_dev_group = {
2730 	.attrs = fsg_lun_dev_attrs,
2731 	.is_visible = fsg_lun_dev_is_visible,
2732 };
2733 
2734 static const struct attribute_group *fsg_lun_dev_groups[] = {
2735 	&fsg_lun_dev_group,
2736 	NULL
2737 };
2738 
2739 int fsg_common_create_lun(struct fsg_common *common, struct fsg_lun_config *cfg,
2740 			  unsigned int id, const char *name,
2741 			  const char **name_pfx)
2742 {
2743 	struct fsg_lun *lun;
2744 	char *pathbuf, *p;
2745 	int rc = -ENOMEM;
2746 
2747 	if (id >= ARRAY_SIZE(common->luns))
2748 		return -ENODEV;
2749 
2750 	if (common->luns[id])
2751 		return -EBUSY;
2752 
2753 	if (!cfg->filename && !cfg->removable) {
2754 		pr_err("no file given for LUN%d\n", id);
2755 		return -EINVAL;
2756 	}
2757 
2758 	lun = kzalloc(sizeof(*lun), GFP_KERNEL);
2759 	if (!lun)
2760 		return -ENOMEM;
2761 
2762 	lun->name_pfx = name_pfx;
2763 
2764 	lun->cdrom = !!cfg->cdrom;
2765 	lun->ro = cfg->cdrom || cfg->ro;
2766 	lun->initially_ro = lun->ro;
2767 	lun->removable = !!cfg->removable;
2768 
2769 	if (!common->sysfs) {
2770 		/* we DON'T own the name!*/
2771 		lun->name = name;
2772 	} else {
2773 		lun->dev.release = fsg_lun_release;
2774 		lun->dev.parent = &common->gadget->dev;
2775 		lun->dev.groups = fsg_lun_dev_groups;
2776 		dev_set_drvdata(&lun->dev, &common->filesem);
2777 		dev_set_name(&lun->dev, "%s", name);
2778 		lun->name = dev_name(&lun->dev);
2779 
2780 		rc = device_register(&lun->dev);
2781 		if (rc) {
2782 			pr_info("failed to register LUN%d: %d\n", id, rc);
2783 			put_device(&lun->dev);
2784 			goto error_sysfs;
2785 		}
2786 	}
2787 
2788 	common->luns[id] = lun;
2789 
2790 	if (cfg->filename) {
2791 		rc = fsg_lun_open(lun, cfg->filename);
2792 		if (rc)
2793 			goto error_lun;
2794 	}
2795 
2796 	pathbuf = kmalloc(PATH_MAX, GFP_KERNEL);
2797 	p = "(no medium)";
2798 	if (fsg_lun_is_open(lun)) {
2799 		p = "(error)";
2800 		if (pathbuf) {
2801 			p = file_path(lun->filp, pathbuf, PATH_MAX);
2802 			if (IS_ERR(p))
2803 				p = "(error)";
2804 		}
2805 	}
2806 	pr_info("LUN: %s%s%sfile: %s\n",
2807 	      lun->removable ? "removable " : "",
2808 	      lun->ro ? "read only " : "",
2809 	      lun->cdrom ? "CD-ROM " : "",
2810 	      p);
2811 	kfree(pathbuf);
2812 
2813 	return 0;
2814 
2815 error_lun:
2816 	if (device_is_registered(&lun->dev))
2817 		device_unregister(&lun->dev);
2818 	fsg_lun_close(lun);
2819 	common->luns[id] = NULL;
2820 error_sysfs:
2821 	kfree(lun);
2822 	return rc;
2823 }
2824 EXPORT_SYMBOL_GPL(fsg_common_create_lun);
2825 
2826 int fsg_common_create_luns(struct fsg_common *common, struct fsg_config *cfg)
2827 {
2828 	char buf[8]; /* enough for 100000000 different numbers, decimal */
2829 	int i, rc;
2830 
2831 	fsg_common_remove_luns(common);
2832 
2833 	for (i = 0; i < cfg->nluns; ++i) {
2834 		snprintf(buf, sizeof(buf), "lun%d", i);
2835 		rc = fsg_common_create_lun(common, &cfg->luns[i], i, buf, NULL);
2836 		if (rc)
2837 			goto fail;
2838 	}
2839 
2840 	pr_info("Number of LUNs=%d\n", cfg->nluns);
2841 
2842 	return 0;
2843 
2844 fail:
2845 	_fsg_common_remove_luns(common, i);
2846 	return rc;
2847 }
2848 EXPORT_SYMBOL_GPL(fsg_common_create_luns);
2849 
2850 void fsg_common_set_inquiry_string(struct fsg_common *common, const char *vn,
2851 				   const char *pn)
2852 {
2853 	int i;
2854 
2855 	/* Prepare inquiryString */
2856 	i = get_default_bcdDevice();
2857 	snprintf(common->inquiry_string, sizeof(common->inquiry_string),
2858 		 "%-8s%-16s%04x", vn ?: "Linux",
2859 		 /* Assume product name dependent on the first LUN */
2860 		 pn ?: ((*common->luns)->cdrom
2861 		     ? "File-CD Gadget"
2862 		     : "File-Stor Gadget"),
2863 		 i);
2864 }
2865 EXPORT_SYMBOL_GPL(fsg_common_set_inquiry_string);
2866 
2867 static void fsg_common_release(struct fsg_common *common)
2868 {
2869 	int i;
2870 
2871 	/* If the thread isn't already dead, tell it to exit now */
2872 	if (common->state != FSG_STATE_TERMINATED) {
2873 		raise_exception(common, FSG_STATE_EXIT);
2874 		wait_for_completion(&common->thread_notifier);
2875 	}
2876 
2877 	for (i = 0; i < ARRAY_SIZE(common->luns); ++i) {
2878 		struct fsg_lun *lun = common->luns[i];
2879 		if (!lun)
2880 			continue;
2881 		fsg_lun_close(lun);
2882 		if (device_is_registered(&lun->dev))
2883 			device_unregister(&lun->dev);
2884 		kfree(lun);
2885 	}
2886 
2887 	_fsg_common_free_buffers(common->buffhds, common->fsg_num_buffers);
2888 	if (common->free_storage_on_release)
2889 		kfree(common);
2890 }
2891 
2892 
2893 /*-------------------------------------------------------------------------*/
2894 
2895 static int fsg_bind(struct usb_configuration *c, struct usb_function *f)
2896 {
2897 	struct fsg_dev		*fsg = fsg_from_func(f);
2898 	struct fsg_common	*common = fsg->common;
2899 	struct usb_gadget	*gadget = c->cdev->gadget;
2900 	int			i;
2901 	struct usb_ep		*ep;
2902 	unsigned		max_burst;
2903 	int			ret;
2904 	struct fsg_opts		*opts;
2905 
2906 	/* Don't allow to bind if we don't have at least one LUN */
2907 	ret = _fsg_common_get_max_lun(common);
2908 	if (ret < 0) {
2909 		pr_err("There should be at least one LUN.\n");
2910 		return -EINVAL;
2911 	}
2912 
2913 	opts = fsg_opts_from_func_inst(f->fi);
2914 	if (!opts->no_configfs) {
2915 		ret = fsg_common_set_cdev(fsg->common, c->cdev,
2916 					  fsg->common->can_stall);
2917 		if (ret)
2918 			return ret;
2919 		fsg_common_set_inquiry_string(fsg->common, NULL, NULL);
2920 	}
2921 
2922 	if (!common->thread_task) {
2923 		common->state = FSG_STATE_NORMAL;
2924 		common->thread_task =
2925 			kthread_create(fsg_main_thread, common, "file-storage");
2926 		if (IS_ERR(common->thread_task)) {
2927 			ret = PTR_ERR(common->thread_task);
2928 			common->thread_task = NULL;
2929 			common->state = FSG_STATE_TERMINATED;
2930 			return ret;
2931 		}
2932 		DBG(common, "I/O thread pid: %d\n",
2933 		    task_pid_nr(common->thread_task));
2934 		wake_up_process(common->thread_task);
2935 	}
2936 
2937 	fsg->gadget = gadget;
2938 
2939 	/* New interface */
2940 	i = usb_interface_id(c, f);
2941 	if (i < 0)
2942 		goto fail;
2943 	fsg_intf_desc.bInterfaceNumber = i;
2944 	fsg->interface_number = i;
2945 
2946 	/* Find all the endpoints we will use */
2947 	ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_in_desc);
2948 	if (!ep)
2949 		goto autoconf_fail;
2950 	fsg->bulk_in = ep;
2951 
2952 	ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_out_desc);
2953 	if (!ep)
2954 		goto autoconf_fail;
2955 	fsg->bulk_out = ep;
2956 
2957 	/* Assume endpoint addresses are the same for both speeds */
2958 	fsg_hs_bulk_in_desc.bEndpointAddress =
2959 		fsg_fs_bulk_in_desc.bEndpointAddress;
2960 	fsg_hs_bulk_out_desc.bEndpointAddress =
2961 		fsg_fs_bulk_out_desc.bEndpointAddress;
2962 
2963 	/* Calculate bMaxBurst, we know packet size is 1024 */
2964 	max_burst = min_t(unsigned, FSG_BUFLEN / 1024, 15);
2965 
2966 	fsg_ss_bulk_in_desc.bEndpointAddress =
2967 		fsg_fs_bulk_in_desc.bEndpointAddress;
2968 	fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst;
2969 
2970 	fsg_ss_bulk_out_desc.bEndpointAddress =
2971 		fsg_fs_bulk_out_desc.bEndpointAddress;
2972 	fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst;
2973 
2974 	ret = usb_assign_descriptors(f, fsg_fs_function, fsg_hs_function,
2975 			fsg_ss_function, fsg_ss_function);
2976 	if (ret)
2977 		goto autoconf_fail;
2978 
2979 	return 0;
2980 
2981 autoconf_fail:
2982 	ERROR(fsg, "unable to autoconfigure all endpoints\n");
2983 	i = -ENOTSUPP;
2984 fail:
2985 	/* terminate the thread */
2986 	if (fsg->common->state != FSG_STATE_TERMINATED) {
2987 		raise_exception(fsg->common, FSG_STATE_EXIT);
2988 		wait_for_completion(&fsg->common->thread_notifier);
2989 	}
2990 	return i;
2991 }
2992 
2993 /****************************** ALLOCATE FUNCTION *************************/
2994 
2995 static void fsg_unbind(struct usb_configuration *c, struct usb_function *f)
2996 {
2997 	struct fsg_dev		*fsg = fsg_from_func(f);
2998 	struct fsg_common	*common = fsg->common;
2999 
3000 	DBG(fsg, "unbind\n");
3001 	if (fsg->common->fsg == fsg) {
3002 		__raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE, NULL);
3003 		/* FIXME: make interruptible or killable somehow? */
3004 		wait_event(common->fsg_wait, common->fsg != fsg);
3005 	}
3006 
3007 	usb_free_all_descriptors(&fsg->function);
3008 }
3009 
3010 static inline struct fsg_lun_opts *to_fsg_lun_opts(struct config_item *item)
3011 {
3012 	return container_of(to_config_group(item), struct fsg_lun_opts, group);
3013 }
3014 
3015 static inline struct fsg_opts *to_fsg_opts(struct config_item *item)
3016 {
3017 	return container_of(to_config_group(item), struct fsg_opts,
3018 			    func_inst.group);
3019 }
3020 
3021 static void fsg_lun_attr_release(struct config_item *item)
3022 {
3023 	struct fsg_lun_opts *lun_opts;
3024 
3025 	lun_opts = to_fsg_lun_opts(item);
3026 	kfree(lun_opts);
3027 }
3028 
3029 static struct configfs_item_operations fsg_lun_item_ops = {
3030 	.release		= fsg_lun_attr_release,
3031 };
3032 
3033 static ssize_t fsg_lun_opts_file_show(struct config_item *item, char *page)
3034 {
3035 	struct fsg_lun_opts *opts = to_fsg_lun_opts(item);
3036 	struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent);
3037 
3038 	return fsg_show_file(opts->lun, &fsg_opts->common->filesem, page);
3039 }
3040 
3041 static ssize_t fsg_lun_opts_file_store(struct config_item *item,
3042 				       const char *page, size_t len)
3043 {
3044 	struct fsg_lun_opts *opts = to_fsg_lun_opts(item);
3045 	struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent);
3046 
3047 	return fsg_store_file(opts->lun, &fsg_opts->common->filesem, page, len);
3048 }
3049 
3050 CONFIGFS_ATTR(fsg_lun_opts_, file);
3051 
3052 static ssize_t fsg_lun_opts_ro_show(struct config_item *item, char *page)
3053 {
3054 	return fsg_show_ro(to_fsg_lun_opts(item)->lun, page);
3055 }
3056 
3057 static ssize_t fsg_lun_opts_ro_store(struct config_item *item,
3058 				       const char *page, size_t len)
3059 {
3060 	struct fsg_lun_opts *opts = to_fsg_lun_opts(item);
3061 	struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent);
3062 
3063 	return fsg_store_ro(opts->lun, &fsg_opts->common->filesem, page, len);
3064 }
3065 
3066 CONFIGFS_ATTR(fsg_lun_opts_, ro);
3067 
3068 static ssize_t fsg_lun_opts_removable_show(struct config_item *item,
3069 					   char *page)
3070 {
3071 	return fsg_show_removable(to_fsg_lun_opts(item)->lun, page);
3072 }
3073 
3074 static ssize_t fsg_lun_opts_removable_store(struct config_item *item,
3075 				       const char *page, size_t len)
3076 {
3077 	return fsg_store_removable(to_fsg_lun_opts(item)->lun, page, len);
3078 }
3079 
3080 CONFIGFS_ATTR(fsg_lun_opts_, removable);
3081 
3082 static ssize_t fsg_lun_opts_cdrom_show(struct config_item *item, char *page)
3083 {
3084 	return fsg_show_cdrom(to_fsg_lun_opts(item)->lun, page);
3085 }
3086 
3087 static ssize_t fsg_lun_opts_cdrom_store(struct config_item *item,
3088 				       const char *page, size_t len)
3089 {
3090 	struct fsg_lun_opts *opts = to_fsg_lun_opts(item);
3091 	struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent);
3092 
3093 	return fsg_store_cdrom(opts->lun, &fsg_opts->common->filesem, page,
3094 			       len);
3095 }
3096 
3097 CONFIGFS_ATTR(fsg_lun_opts_, cdrom);
3098 
3099 static ssize_t fsg_lun_opts_nofua_show(struct config_item *item, char *page)
3100 {
3101 	return fsg_show_nofua(to_fsg_lun_opts(item)->lun, page);
3102 }
3103 
3104 static ssize_t fsg_lun_opts_nofua_store(struct config_item *item,
3105 				       const char *page, size_t len)
3106 {
3107 	return fsg_store_nofua(to_fsg_lun_opts(item)->lun, page, len);
3108 }
3109 
3110 CONFIGFS_ATTR(fsg_lun_opts_, nofua);
3111 
3112 static ssize_t fsg_lun_opts_inquiry_string_show(struct config_item *item,
3113 						char *page)
3114 {
3115 	return fsg_show_inquiry_string(to_fsg_lun_opts(item)->lun, page);
3116 }
3117 
3118 static ssize_t fsg_lun_opts_inquiry_string_store(struct config_item *item,
3119 						 const char *page, size_t len)
3120 {
3121 	return fsg_store_inquiry_string(to_fsg_lun_opts(item)->lun, page, len);
3122 }
3123 
3124 CONFIGFS_ATTR(fsg_lun_opts_, inquiry_string);
3125 
3126 static struct configfs_attribute *fsg_lun_attrs[] = {
3127 	&fsg_lun_opts_attr_file,
3128 	&fsg_lun_opts_attr_ro,
3129 	&fsg_lun_opts_attr_removable,
3130 	&fsg_lun_opts_attr_cdrom,
3131 	&fsg_lun_opts_attr_nofua,
3132 	&fsg_lun_opts_attr_inquiry_string,
3133 	NULL,
3134 };
3135 
3136 static const struct config_item_type fsg_lun_type = {
3137 	.ct_item_ops	= &fsg_lun_item_ops,
3138 	.ct_attrs	= fsg_lun_attrs,
3139 	.ct_owner	= THIS_MODULE,
3140 };
3141 
3142 static struct config_group *fsg_lun_make(struct config_group *group,
3143 					 const char *name)
3144 {
3145 	struct fsg_lun_opts *opts;
3146 	struct fsg_opts *fsg_opts;
3147 	struct fsg_lun_config config;
3148 	char *num_str;
3149 	u8 num;
3150 	int ret;
3151 
3152 	num_str = strchr(name, '.');
3153 	if (!num_str) {
3154 		pr_err("Unable to locate . in LUN.NUMBER\n");
3155 		return ERR_PTR(-EINVAL);
3156 	}
3157 	num_str++;
3158 
3159 	ret = kstrtou8(num_str, 0, &num);
3160 	if (ret)
3161 		return ERR_PTR(ret);
3162 
3163 	fsg_opts = to_fsg_opts(&group->cg_item);
3164 	if (num >= FSG_MAX_LUNS)
3165 		return ERR_PTR(-ERANGE);
3166 	num = array_index_nospec(num, FSG_MAX_LUNS);
3167 
3168 	mutex_lock(&fsg_opts->lock);
3169 	if (fsg_opts->refcnt || fsg_opts->common->luns[num]) {
3170 		ret = -EBUSY;
3171 		goto out;
3172 	}
3173 
3174 	opts = kzalloc(sizeof(*opts), GFP_KERNEL);
3175 	if (!opts) {
3176 		ret = -ENOMEM;
3177 		goto out;
3178 	}
3179 
3180 	memset(&config, 0, sizeof(config));
3181 	config.removable = true;
3182 
3183 	ret = fsg_common_create_lun(fsg_opts->common, &config, num, name,
3184 				    (const char **)&group->cg_item.ci_name);
3185 	if (ret) {
3186 		kfree(opts);
3187 		goto out;
3188 	}
3189 	opts->lun = fsg_opts->common->luns[num];
3190 	opts->lun_id = num;
3191 	mutex_unlock(&fsg_opts->lock);
3192 
3193 	config_group_init_type_name(&opts->group, name, &fsg_lun_type);
3194 
3195 	return &opts->group;
3196 out:
3197 	mutex_unlock(&fsg_opts->lock);
3198 	return ERR_PTR(ret);
3199 }
3200 
3201 static void fsg_lun_drop(struct config_group *group, struct config_item *item)
3202 {
3203 	struct fsg_lun_opts *lun_opts;
3204 	struct fsg_opts *fsg_opts;
3205 
3206 	lun_opts = to_fsg_lun_opts(item);
3207 	fsg_opts = to_fsg_opts(&group->cg_item);
3208 
3209 	mutex_lock(&fsg_opts->lock);
3210 	if (fsg_opts->refcnt) {
3211 		struct config_item *gadget;
3212 
3213 		gadget = group->cg_item.ci_parent->ci_parent;
3214 		unregister_gadget_item(gadget);
3215 	}
3216 
3217 	fsg_common_remove_lun(lun_opts->lun);
3218 	fsg_opts->common->luns[lun_opts->lun_id] = NULL;
3219 	lun_opts->lun_id = 0;
3220 	mutex_unlock(&fsg_opts->lock);
3221 
3222 	config_item_put(item);
3223 }
3224 
3225 static void fsg_attr_release(struct config_item *item)
3226 {
3227 	struct fsg_opts *opts = to_fsg_opts(item);
3228 
3229 	usb_put_function_instance(&opts->func_inst);
3230 }
3231 
3232 static struct configfs_item_operations fsg_item_ops = {
3233 	.release		= fsg_attr_release,
3234 };
3235 
3236 static ssize_t fsg_opts_stall_show(struct config_item *item, char *page)
3237 {
3238 	struct fsg_opts *opts = to_fsg_opts(item);
3239 	int result;
3240 
3241 	mutex_lock(&opts->lock);
3242 	result = sprintf(page, "%d", opts->common->can_stall);
3243 	mutex_unlock(&opts->lock);
3244 
3245 	return result;
3246 }
3247 
3248 static ssize_t fsg_opts_stall_store(struct config_item *item, const char *page,
3249 				    size_t len)
3250 {
3251 	struct fsg_opts *opts = to_fsg_opts(item);
3252 	int ret;
3253 	bool stall;
3254 
3255 	mutex_lock(&opts->lock);
3256 
3257 	if (opts->refcnt) {
3258 		mutex_unlock(&opts->lock);
3259 		return -EBUSY;
3260 	}
3261 
3262 	ret = strtobool(page, &stall);
3263 	if (!ret) {
3264 		opts->common->can_stall = stall;
3265 		ret = len;
3266 	}
3267 
3268 	mutex_unlock(&opts->lock);
3269 
3270 	return ret;
3271 }
3272 
3273 CONFIGFS_ATTR(fsg_opts_, stall);
3274 
3275 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
3276 static ssize_t fsg_opts_num_buffers_show(struct config_item *item, char *page)
3277 {
3278 	struct fsg_opts *opts = to_fsg_opts(item);
3279 	int result;
3280 
3281 	mutex_lock(&opts->lock);
3282 	result = sprintf(page, "%d", opts->common->fsg_num_buffers);
3283 	mutex_unlock(&opts->lock);
3284 
3285 	return result;
3286 }
3287 
3288 static ssize_t fsg_opts_num_buffers_store(struct config_item *item,
3289 					  const char *page, size_t len)
3290 {
3291 	struct fsg_opts *opts = to_fsg_opts(item);
3292 	int ret;
3293 	u8 num;
3294 
3295 	mutex_lock(&opts->lock);
3296 	if (opts->refcnt) {
3297 		ret = -EBUSY;
3298 		goto end;
3299 	}
3300 	ret = kstrtou8(page, 0, &num);
3301 	if (ret)
3302 		goto end;
3303 
3304 	ret = fsg_common_set_num_buffers(opts->common, num);
3305 	if (ret)
3306 		goto end;
3307 	ret = len;
3308 
3309 end:
3310 	mutex_unlock(&opts->lock);
3311 	return ret;
3312 }
3313 
3314 CONFIGFS_ATTR(fsg_opts_, num_buffers);
3315 #endif
3316 
3317 static struct configfs_attribute *fsg_attrs[] = {
3318 	&fsg_opts_attr_stall,
3319 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
3320 	&fsg_opts_attr_num_buffers,
3321 #endif
3322 	NULL,
3323 };
3324 
3325 static struct configfs_group_operations fsg_group_ops = {
3326 	.make_group	= fsg_lun_make,
3327 	.drop_item	= fsg_lun_drop,
3328 };
3329 
3330 static const struct config_item_type fsg_func_type = {
3331 	.ct_item_ops	= &fsg_item_ops,
3332 	.ct_group_ops	= &fsg_group_ops,
3333 	.ct_attrs	= fsg_attrs,
3334 	.ct_owner	= THIS_MODULE,
3335 };
3336 
3337 static void fsg_free_inst(struct usb_function_instance *fi)
3338 {
3339 	struct fsg_opts *opts;
3340 
3341 	opts = fsg_opts_from_func_inst(fi);
3342 	fsg_common_release(opts->common);
3343 	kfree(opts);
3344 }
3345 
3346 static struct usb_function_instance *fsg_alloc_inst(void)
3347 {
3348 	struct fsg_opts *opts;
3349 	struct fsg_lun_config config;
3350 	int rc;
3351 
3352 	opts = kzalloc(sizeof(*opts), GFP_KERNEL);
3353 	if (!opts)
3354 		return ERR_PTR(-ENOMEM);
3355 	mutex_init(&opts->lock);
3356 	opts->func_inst.free_func_inst = fsg_free_inst;
3357 	opts->common = fsg_common_setup(opts->common);
3358 	if (IS_ERR(opts->common)) {
3359 		rc = PTR_ERR(opts->common);
3360 		goto release_opts;
3361 	}
3362 
3363 	rc = fsg_common_set_num_buffers(opts->common,
3364 					CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS);
3365 	if (rc)
3366 		goto release_common;
3367 
3368 	pr_info(FSG_DRIVER_DESC ", version: " FSG_DRIVER_VERSION "\n");
3369 
3370 	memset(&config, 0, sizeof(config));
3371 	config.removable = true;
3372 	rc = fsg_common_create_lun(opts->common, &config, 0, "lun.0",
3373 			(const char **)&opts->func_inst.group.cg_item.ci_name);
3374 	if (rc)
3375 		goto release_buffers;
3376 
3377 	opts->lun0.lun = opts->common->luns[0];
3378 	opts->lun0.lun_id = 0;
3379 
3380 	config_group_init_type_name(&opts->func_inst.group, "", &fsg_func_type);
3381 
3382 	config_group_init_type_name(&opts->lun0.group, "lun.0", &fsg_lun_type);
3383 	configfs_add_default_group(&opts->lun0.group, &opts->func_inst.group);
3384 
3385 	return &opts->func_inst;
3386 
3387 release_buffers:
3388 	fsg_common_free_buffers(opts->common);
3389 release_common:
3390 	kfree(opts->common);
3391 release_opts:
3392 	kfree(opts);
3393 	return ERR_PTR(rc);
3394 }
3395 
3396 static void fsg_free(struct usb_function *f)
3397 {
3398 	struct fsg_dev *fsg;
3399 	struct fsg_opts *opts;
3400 
3401 	fsg = container_of(f, struct fsg_dev, function);
3402 	opts = container_of(f->fi, struct fsg_opts, func_inst);
3403 
3404 	mutex_lock(&opts->lock);
3405 	opts->refcnt--;
3406 	mutex_unlock(&opts->lock);
3407 
3408 	kfree(fsg);
3409 }
3410 
3411 static struct usb_function *fsg_alloc(struct usb_function_instance *fi)
3412 {
3413 	struct fsg_opts *opts = fsg_opts_from_func_inst(fi);
3414 	struct fsg_common *common = opts->common;
3415 	struct fsg_dev *fsg;
3416 
3417 	fsg = kzalloc(sizeof(*fsg), GFP_KERNEL);
3418 	if (unlikely(!fsg))
3419 		return ERR_PTR(-ENOMEM);
3420 
3421 	mutex_lock(&opts->lock);
3422 	opts->refcnt++;
3423 	mutex_unlock(&opts->lock);
3424 
3425 	fsg->function.name	= FSG_DRIVER_DESC;
3426 	fsg->function.bind	= fsg_bind;
3427 	fsg->function.unbind	= fsg_unbind;
3428 	fsg->function.setup	= fsg_setup;
3429 	fsg->function.set_alt	= fsg_set_alt;
3430 	fsg->function.disable	= fsg_disable;
3431 	fsg->function.free_func	= fsg_free;
3432 
3433 	fsg->common               = common;
3434 
3435 	return &fsg->function;
3436 }
3437 
3438 DECLARE_USB_FUNCTION_INIT(mass_storage, fsg_alloc_inst, fsg_alloc);
3439 MODULE_LICENSE("GPL");
3440 MODULE_AUTHOR("Michal Nazarewicz");
3441 
3442 /************************* Module parameters *************************/
3443 
3444 
3445 void fsg_config_from_params(struct fsg_config *cfg,
3446 		       const struct fsg_module_parameters *params,
3447 		       unsigned int fsg_num_buffers)
3448 {
3449 	struct fsg_lun_config *lun;
3450 	unsigned i;
3451 
3452 	/* Configure LUNs */
3453 	cfg->nluns =
3454 		min(params->luns ?: (params->file_count ?: 1u),
3455 		    (unsigned)FSG_MAX_LUNS);
3456 	for (i = 0, lun = cfg->luns; i < cfg->nluns; ++i, ++lun) {
3457 		lun->ro = !!params->ro[i];
3458 		lun->cdrom = !!params->cdrom[i];
3459 		lun->removable = !!params->removable[i];
3460 		lun->filename =
3461 			params->file_count > i && params->file[i][0]
3462 			? params->file[i]
3463 			: NULL;
3464 	}
3465 
3466 	/* Let MSF use defaults */
3467 	cfg->vendor_name = NULL;
3468 	cfg->product_name = NULL;
3469 
3470 	cfg->ops = NULL;
3471 	cfg->private_data = NULL;
3472 
3473 	/* Finalise */
3474 	cfg->can_stall = params->stall;
3475 	cfg->fsg_num_buffers = fsg_num_buffers;
3476 }
3477 EXPORT_SYMBOL_GPL(fsg_config_from_params);
3478