1 /*
2  * f_mass_storage.c -- Mass Storage USB Composite Function
3  *
4  * Copyright (C) 2003-2008 Alan Stern
5  * Copyright (C) 2009 Samsung Electronics
6  *                    Author: Michal Nazarewicz <mina86@mina86.com>
7  * All rights reserved.
8  *
9  * Redistribution and use in source and binary forms, with or without
10  * modification, are permitted provided that the following conditions
11  * are met:
12  * 1. Redistributions of source code must retain the above copyright
13  *    notice, this list of conditions, and the following disclaimer,
14  *    without modification.
15  * 2. Redistributions in binary form must reproduce the above copyright
16  *    notice, this list of conditions and the following disclaimer in the
17  *    documentation and/or other materials provided with the distribution.
18  * 3. The names of the above-listed copyright holders may not be used
19  *    to endorse or promote products derived from this software without
20  *    specific prior written permission.
21  *
22  * ALTERNATIVELY, this software may be distributed under the terms of the
23  * GNU General Public License ("GPL") as published by the Free Software
24  * Foundation, either version 2 of that License or (at your option) any
25  * later version.
26  *
27  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
28  * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
29  * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
30  * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
31  * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
32  * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
33  * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
34  * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
35  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
36  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
37  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
38  */
39 
40 /*
41  * The Mass Storage Function acts as a USB Mass Storage device,
42  * appearing to the host as a disk drive or as a CD-ROM drive.  In
43  * addition to providing an example of a genuinely useful composite
44  * function for a USB device, it also illustrates a technique of
45  * double-buffering for increased throughput.
46  *
47  * For more information about MSF and in particular its module
48  * parameters and sysfs interface read the
49  * <Documentation/usb/mass-storage.txt> file.
50  */
51 
52 /*
53  * MSF is configured by specifying a fsg_config structure.  It has the
54  * following fields:
55  *
56  *	nluns		Number of LUNs function have (anywhere from 1
57  *				to FSG_MAX_LUNS).
58  *	luns		An array of LUN configuration values.  This
59  *				should be filled for each LUN that
60  *				function will include (ie. for "nluns"
61  *				LUNs).  Each element of the array has
62  *				the following fields:
63  *	->filename	The path to the backing file for the LUN.
64  *				Required if LUN is not marked as
65  *				removable.
66  *	->ro		Flag specifying access to the LUN shall be
67  *				read-only.  This is implied if CD-ROM
68  *				emulation is enabled as well as when
69  *				it was impossible to open "filename"
70  *				in R/W mode.
71  *	->removable	Flag specifying that LUN shall be indicated as
72  *				being removable.
73  *	->cdrom		Flag specifying that LUN shall be reported as
74  *				being a CD-ROM.
75  *	->nofua		Flag specifying that FUA flag in SCSI WRITE(10,12)
76  *				commands for this LUN shall be ignored.
77  *
78  *	vendor_name
79  *	product_name
80  *	release		Information used as a reply to INQUIRY
81  *				request.  To use default set to NULL,
82  *				NULL, 0xffff respectively.  The first
83  *				field should be 8 and the second 16
84  *				characters or less.
85  *
86  *	can_stall	Set to permit function to halt bulk endpoints.
87  *				Disabled on some USB devices known not
88  *				to work correctly.  You should set it
89  *				to true.
90  *
91  * If "removable" is not set for a LUN then a backing file must be
92  * specified.  If it is set, then NULL filename means the LUN's medium
93  * is not loaded (an empty string as "filename" in the fsg_config
94  * structure causes error).  The CD-ROM emulation includes a single
95  * data track and no audio tracks; hence there need be only one
96  * backing file per LUN.
97  *
98  * This function is heavily based on "File-backed Storage Gadget" by
99  * Alan Stern which in turn is heavily based on "Gadget Zero" by David
100  * Brownell.  The driver's SCSI command interface was based on the
101  * "Information technology - Small Computer System Interface - 2"
102  * document from X3T9.2 Project 375D, Revision 10L, 7-SEP-93,
103  * available at <http://www.t10.org/ftp/t10/drafts/s2/s2-r10l.pdf>.
104  * The single exception is opcode 0x23 (READ FORMAT CAPACITIES), which
105  * was based on the "Universal Serial Bus Mass Storage Class UFI
106  * Command Specification" document, Revision 1.0, December 14, 1998,
107  * available at
108  * <http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf>.
109  */
110 
111 /*
112  *				Driver Design
113  *
114  * The MSF is fairly straightforward.  There is a main kernel
115  * thread that handles most of the work.  Interrupt routines field
116  * callbacks from the controller driver: bulk- and interrupt-request
117  * completion notifications, endpoint-0 events, and disconnect events.
118  * Completion events are passed to the main thread by wakeup calls.  Many
119  * ep0 requests are handled at interrupt time, but SetInterface,
120  * SetConfiguration, and device reset requests are forwarded to the
121  * thread in the form of "exceptions" using SIGUSR1 signals (since they
122  * should interrupt any ongoing file I/O operations).
123  *
124  * The thread's main routine implements the standard command/data/status
125  * parts of a SCSI interaction.  It and its subroutines are full of tests
126  * for pending signals/exceptions -- all this polling is necessary since
127  * the kernel has no setjmp/longjmp equivalents.  (Maybe this is an
128  * indication that the driver really wants to be running in userspace.)
129  * An important point is that so long as the thread is alive it keeps an
130  * open reference to the backing file.  This will prevent unmounting
131  * the backing file's underlying filesystem and could cause problems
132  * during system shutdown, for example.  To prevent such problems, the
133  * thread catches INT, TERM, and KILL signals and converts them into
134  * an EXIT exception.
135  *
136  * In normal operation the main thread is started during the gadget's
137  * fsg_bind() callback and stopped during fsg_unbind().  But it can
138  * also exit when it receives a signal, and there's no point leaving
139  * the gadget running when the thread is dead.  As of this moment, MSF
140  * provides no way to deregister the gadget when thread dies -- maybe
141  * a callback functions is needed.
142  *
143  * To provide maximum throughput, the driver uses a circular pipeline of
144  * buffer heads (struct fsg_buffhd).  In principle the pipeline can be
145  * arbitrarily long; in practice the benefits don't justify having more
146  * than 2 stages (i.e., double buffering).  But it helps to think of the
147  * pipeline as being a long one.  Each buffer head contains a bulk-in and
148  * a bulk-out request pointer (since the buffer can be used for both
149  * output and input -- directions always are given from the host's
150  * point of view) as well as a pointer to the buffer and various state
151  * variables.
152  *
153  * Use of the pipeline follows a simple protocol.  There is a variable
154  * (fsg->next_buffhd_to_fill) that points to the next buffer head to use.
155  * At any time that buffer head may still be in use from an earlier
156  * request, so each buffer head has a state variable indicating whether
157  * it is EMPTY, FULL, or BUSY.  Typical use involves waiting for the
158  * buffer head to be EMPTY, filling the buffer either by file I/O or by
159  * USB I/O (during which the buffer head is BUSY), and marking the buffer
160  * head FULL when the I/O is complete.  Then the buffer will be emptied
161  * (again possibly by USB I/O, during which it is marked BUSY) and
162  * finally marked EMPTY again (possibly by a completion routine).
163  *
164  * A module parameter tells the driver to avoid stalling the bulk
165  * endpoints wherever the transport specification allows.  This is
166  * necessary for some UDCs like the SuperH, which cannot reliably clear a
167  * halt on a bulk endpoint.  However, under certain circumstances the
168  * Bulk-only specification requires a stall.  In such cases the driver
169  * will halt the endpoint and set a flag indicating that it should clear
170  * the halt in software during the next device reset.  Hopefully this
171  * will permit everything to work correctly.  Furthermore, although the
172  * specification allows the bulk-out endpoint to halt when the host sends
173  * too much data, implementing this would cause an unavoidable race.
174  * The driver will always use the "no-stall" approach for OUT transfers.
175  *
176  * One subtle point concerns sending status-stage responses for ep0
177  * requests.  Some of these requests, such as device reset, can involve
178  * interrupting an ongoing file I/O operation, which might take an
179  * arbitrarily long time.  During that delay the host might give up on
180  * the original ep0 request and issue a new one.  When that happens the
181  * driver should not notify the host about completion of the original
182  * request, as the host will no longer be waiting for it.  So the driver
183  * assigns to each ep0 request a unique tag, and it keeps track of the
184  * tag value of the request associated with a long-running exception
185  * (device-reset, interface-change, or configuration-change).  When the
186  * exception handler is finished, the status-stage response is submitted
187  * only if the current ep0 request tag is equal to the exception request
188  * tag.  Thus only the most recently received ep0 request will get a
189  * status-stage response.
190  *
191  * Warning: This driver source file is too long.  It ought to be split up
192  * into a header file plus about 3 separate .c files, to handle the details
193  * of the Gadget, USB Mass Storage, and SCSI protocols.
194  */
195 
196 
197 /* #define VERBOSE_DEBUG */
198 /* #define DUMP_MSGS */
199 
200 #include <linux/blkdev.h>
201 #include <linux/completion.h>
202 #include <linux/dcache.h>
203 #include <linux/delay.h>
204 #include <linux/device.h>
205 #include <linux/fcntl.h>
206 #include <linux/file.h>
207 #include <linux/fs.h>
208 #include <linux/kref.h>
209 #include <linux/kthread.h>
210 #include <linux/limits.h>
211 #include <linux/rwsem.h>
212 #include <linux/slab.h>
213 #include <linux/spinlock.h>
214 #include <linux/string.h>
215 #include <linux/freezer.h>
216 #include <linux/module.h>
217 #include <linux/uaccess.h>
218 
219 #include <linux/usb/ch9.h>
220 #include <linux/usb/gadget.h>
221 #include <linux/usb/composite.h>
222 
223 #include "configfs.h"
224 
225 
226 /*------------------------------------------------------------------------*/
227 
228 #define FSG_DRIVER_DESC		"Mass Storage Function"
229 #define FSG_DRIVER_VERSION	"2009/09/11"
230 
231 static const char fsg_string_interface[] = "Mass Storage";
232 
233 #include "storage_common.h"
234 #include "f_mass_storage.h"
235 
236 /* Static strings, in UTF-8 (for simplicity we use only ASCII characters) */
237 static struct usb_string		fsg_strings[] = {
238 	{FSG_STRING_INTERFACE,		fsg_string_interface},
239 	{}
240 };
241 
242 static struct usb_gadget_strings	fsg_stringtab = {
243 	.language	= 0x0409,		/* en-us */
244 	.strings	= fsg_strings,
245 };
246 
247 static struct usb_gadget_strings *fsg_strings_array[] = {
248 	&fsg_stringtab,
249 	NULL,
250 };
251 
252 /*-------------------------------------------------------------------------*/
253 
254 struct fsg_dev;
255 struct fsg_common;
256 
257 /* Data shared by all the FSG instances. */
258 struct fsg_common {
259 	struct usb_gadget	*gadget;
260 	struct usb_composite_dev *cdev;
261 	struct fsg_dev		*fsg, *new_fsg;
262 	wait_queue_head_t	fsg_wait;
263 
264 	/* filesem protects: backing files in use */
265 	struct rw_semaphore	filesem;
266 
267 	/* lock protects: state, all the req_busy's */
268 	spinlock_t		lock;
269 
270 	struct usb_ep		*ep0;		/* Copy of gadget->ep0 */
271 	struct usb_request	*ep0req;	/* Copy of cdev->req */
272 	unsigned int		ep0_req_tag;
273 
274 	struct fsg_buffhd	*next_buffhd_to_fill;
275 	struct fsg_buffhd	*next_buffhd_to_drain;
276 	struct fsg_buffhd	*buffhds;
277 	unsigned int		fsg_num_buffers;
278 
279 	int			cmnd_size;
280 	u8			cmnd[MAX_COMMAND_SIZE];
281 
282 	unsigned int		lun;
283 	struct fsg_lun		*luns[FSG_MAX_LUNS];
284 	struct fsg_lun		*curlun;
285 
286 	unsigned int		bulk_out_maxpacket;
287 	enum fsg_state		state;		/* For exception handling */
288 	unsigned int		exception_req_tag;
289 
290 	enum data_direction	data_dir;
291 	u32			data_size;
292 	u32			data_size_from_cmnd;
293 	u32			tag;
294 	u32			residue;
295 	u32			usb_amount_left;
296 
297 	unsigned int		can_stall:1;
298 	unsigned int		free_storage_on_release:1;
299 	unsigned int		phase_error:1;
300 	unsigned int		short_packet_received:1;
301 	unsigned int		bad_lun_okay:1;
302 	unsigned int		running:1;
303 	unsigned int		sysfs:1;
304 
305 	int			thread_wakeup_needed;
306 	struct completion	thread_notifier;
307 	struct task_struct	*thread_task;
308 
309 	/* Callback functions. */
310 	const struct fsg_operations	*ops;
311 	/* Gadget's private data. */
312 	void			*private_data;
313 
314 	/*
315 	 * Vendor (8 chars), product (16 chars), release (4
316 	 * hexadecimal digits) and NUL byte
317 	 */
318 	char inquiry_string[8 + 16 + 4 + 1];
319 
320 	struct kref		ref;
321 };
322 
323 struct fsg_dev {
324 	struct usb_function	function;
325 	struct usb_gadget	*gadget;	/* Copy of cdev->gadget */
326 	struct fsg_common	*common;
327 
328 	u16			interface_number;
329 
330 	unsigned int		bulk_in_enabled:1;
331 	unsigned int		bulk_out_enabled:1;
332 
333 	unsigned long		atomic_bitflags;
334 #define IGNORE_BULK_OUT		0
335 
336 	struct usb_ep		*bulk_in;
337 	struct usb_ep		*bulk_out;
338 };
339 
340 static inline int __fsg_is_set(struct fsg_common *common,
341 			       const char *func, unsigned line)
342 {
343 	if (common->fsg)
344 		return 1;
345 	ERROR(common, "common->fsg is NULL in %s at %u\n", func, line);
346 	WARN_ON(1);
347 	return 0;
348 }
349 
350 #define fsg_is_set(common) likely(__fsg_is_set(common, __func__, __LINE__))
351 
352 static inline struct fsg_dev *fsg_from_func(struct usb_function *f)
353 {
354 	return container_of(f, struct fsg_dev, function);
355 }
356 
357 typedef void (*fsg_routine_t)(struct fsg_dev *);
358 
359 static int exception_in_progress(struct fsg_common *common)
360 {
361 	return common->state > FSG_STATE_IDLE;
362 }
363 
364 /* Make bulk-out requests be divisible by the maxpacket size */
365 static void set_bulk_out_req_length(struct fsg_common *common,
366 				    struct fsg_buffhd *bh, unsigned int length)
367 {
368 	unsigned int	rem;
369 
370 	bh->bulk_out_intended_length = length;
371 	rem = length % common->bulk_out_maxpacket;
372 	if (rem > 0)
373 		length += common->bulk_out_maxpacket - rem;
374 	bh->outreq->length = length;
375 }
376 
377 
378 /*-------------------------------------------------------------------------*/
379 
380 static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep)
381 {
382 	const char	*name;
383 
384 	if (ep == fsg->bulk_in)
385 		name = "bulk-in";
386 	else if (ep == fsg->bulk_out)
387 		name = "bulk-out";
388 	else
389 		name = ep->name;
390 	DBG(fsg, "%s set halt\n", name);
391 	return usb_ep_set_halt(ep);
392 }
393 
394 
395 /*-------------------------------------------------------------------------*/
396 
397 /* These routines may be called in process context or in_irq */
398 
399 /* Caller must hold fsg->lock */
400 static void wakeup_thread(struct fsg_common *common)
401 {
402 	smp_wmb();	/* ensure the write of bh->state is complete */
403 	/* Tell the main thread that something has happened */
404 	common->thread_wakeup_needed = 1;
405 	if (common->thread_task)
406 		wake_up_process(common->thread_task);
407 }
408 
409 static void raise_exception(struct fsg_common *common, enum fsg_state new_state)
410 {
411 	unsigned long		flags;
412 
413 	/*
414 	 * Do nothing if a higher-priority exception is already in progress.
415 	 * If a lower-or-equal priority exception is in progress, preempt it
416 	 * and notify the main thread by sending it a signal.
417 	 */
418 	spin_lock_irqsave(&common->lock, flags);
419 	if (common->state <= new_state) {
420 		common->exception_req_tag = common->ep0_req_tag;
421 		common->state = new_state;
422 		if (common->thread_task)
423 			send_sig_info(SIGUSR1, SEND_SIG_FORCED,
424 				      common->thread_task);
425 	}
426 	spin_unlock_irqrestore(&common->lock, flags);
427 }
428 
429 
430 /*-------------------------------------------------------------------------*/
431 
432 static int ep0_queue(struct fsg_common *common)
433 {
434 	int	rc;
435 
436 	rc = usb_ep_queue(common->ep0, common->ep0req, GFP_ATOMIC);
437 	common->ep0->driver_data = common;
438 	if (rc != 0 && rc != -ESHUTDOWN) {
439 		/* We can't do much more than wait for a reset */
440 		WARNING(common, "error in submission: %s --> %d\n",
441 			common->ep0->name, rc);
442 	}
443 	return rc;
444 }
445 
446 
447 /*-------------------------------------------------------------------------*/
448 
449 /* Completion handlers. These always run in_irq. */
450 
451 static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req)
452 {
453 	struct fsg_common	*common = ep->driver_data;
454 	struct fsg_buffhd	*bh = req->context;
455 
456 	if (req->status || req->actual != req->length)
457 		DBG(common, "%s --> %d, %u/%u\n", __func__,
458 		    req->status, req->actual, req->length);
459 	if (req->status == -ECONNRESET)		/* Request was cancelled */
460 		usb_ep_fifo_flush(ep);
461 
462 	/* Hold the lock while we update the request and buffer states */
463 	smp_wmb();
464 	spin_lock(&common->lock);
465 	bh->inreq_busy = 0;
466 	bh->state = BUF_STATE_EMPTY;
467 	wakeup_thread(common);
468 	spin_unlock(&common->lock);
469 }
470 
471 static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req)
472 {
473 	struct fsg_common	*common = ep->driver_data;
474 	struct fsg_buffhd	*bh = req->context;
475 
476 	dump_msg(common, "bulk-out", req->buf, req->actual);
477 	if (req->status || req->actual != bh->bulk_out_intended_length)
478 		DBG(common, "%s --> %d, %u/%u\n", __func__,
479 		    req->status, req->actual, bh->bulk_out_intended_length);
480 	if (req->status == -ECONNRESET)		/* Request was cancelled */
481 		usb_ep_fifo_flush(ep);
482 
483 	/* Hold the lock while we update the request and buffer states */
484 	smp_wmb();
485 	spin_lock(&common->lock);
486 	bh->outreq_busy = 0;
487 	bh->state = BUF_STATE_FULL;
488 	wakeup_thread(common);
489 	spin_unlock(&common->lock);
490 }
491 
492 static int _fsg_common_get_max_lun(struct fsg_common *common)
493 {
494 	int i = ARRAY_SIZE(common->luns) - 1;
495 
496 	while (i >= 0 && !common->luns[i])
497 		--i;
498 
499 	return i;
500 }
501 
502 static int fsg_setup(struct usb_function *f,
503 		     const struct usb_ctrlrequest *ctrl)
504 {
505 	struct fsg_dev		*fsg = fsg_from_func(f);
506 	struct usb_request	*req = fsg->common->ep0req;
507 	u16			w_index = le16_to_cpu(ctrl->wIndex);
508 	u16			w_value = le16_to_cpu(ctrl->wValue);
509 	u16			w_length = le16_to_cpu(ctrl->wLength);
510 
511 	if (!fsg_is_set(fsg->common))
512 		return -EOPNOTSUPP;
513 
514 	++fsg->common->ep0_req_tag;	/* Record arrival of a new request */
515 	req->context = NULL;
516 	req->length = 0;
517 	dump_msg(fsg, "ep0-setup", (u8 *) ctrl, sizeof(*ctrl));
518 
519 	switch (ctrl->bRequest) {
520 
521 	case US_BULK_RESET_REQUEST:
522 		if (ctrl->bRequestType !=
523 		    (USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE))
524 			break;
525 		if (w_index != fsg->interface_number || w_value != 0 ||
526 				w_length != 0)
527 			return -EDOM;
528 
529 		/*
530 		 * Raise an exception to stop the current operation
531 		 * and reinitialize our state.
532 		 */
533 		DBG(fsg, "bulk reset request\n");
534 		raise_exception(fsg->common, FSG_STATE_RESET);
535 		return USB_GADGET_DELAYED_STATUS;
536 
537 	case US_BULK_GET_MAX_LUN:
538 		if (ctrl->bRequestType !=
539 		    (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE))
540 			break;
541 		if (w_index != fsg->interface_number || w_value != 0 ||
542 				w_length != 1)
543 			return -EDOM;
544 		VDBG(fsg, "get max LUN\n");
545 		*(u8 *)req->buf = _fsg_common_get_max_lun(fsg->common);
546 
547 		/* Respond with data/status */
548 		req->length = min((u16)1, w_length);
549 		return ep0_queue(fsg->common);
550 	}
551 
552 	VDBG(fsg,
553 	     "unknown class-specific control req %02x.%02x v%04x i%04x l%u\n",
554 	     ctrl->bRequestType, ctrl->bRequest,
555 	     le16_to_cpu(ctrl->wValue), w_index, w_length);
556 	return -EOPNOTSUPP;
557 }
558 
559 
560 /*-------------------------------------------------------------------------*/
561 
562 /* All the following routines run in process context */
563 
564 /* Use this for bulk or interrupt transfers, not ep0 */
565 static void start_transfer(struct fsg_dev *fsg, struct usb_ep *ep,
566 			   struct usb_request *req, int *pbusy,
567 			   enum fsg_buffer_state *state)
568 {
569 	int	rc;
570 
571 	if (ep == fsg->bulk_in)
572 		dump_msg(fsg, "bulk-in", req->buf, req->length);
573 
574 	spin_lock_irq(&fsg->common->lock);
575 	*pbusy = 1;
576 	*state = BUF_STATE_BUSY;
577 	spin_unlock_irq(&fsg->common->lock);
578 
579 	rc = usb_ep_queue(ep, req, GFP_KERNEL);
580 	if (rc == 0)
581 		return;  /* All good, we're done */
582 
583 	*pbusy = 0;
584 	*state = BUF_STATE_EMPTY;
585 
586 	/* We can't do much more than wait for a reset */
587 
588 	/*
589 	 * Note: currently the net2280 driver fails zero-length
590 	 * submissions if DMA is enabled.
591 	 */
592 	if (rc != -ESHUTDOWN && !(rc == -EOPNOTSUPP && req->length == 0))
593 		WARNING(fsg, "error in submission: %s --> %d\n", ep->name, rc);
594 }
595 
596 static bool start_in_transfer(struct fsg_common *common, struct fsg_buffhd *bh)
597 {
598 	if (!fsg_is_set(common))
599 		return false;
600 	start_transfer(common->fsg, common->fsg->bulk_in,
601 		       bh->inreq, &bh->inreq_busy, &bh->state);
602 	return true;
603 }
604 
605 static bool start_out_transfer(struct fsg_common *common, struct fsg_buffhd *bh)
606 {
607 	if (!fsg_is_set(common))
608 		return false;
609 	start_transfer(common->fsg, common->fsg->bulk_out,
610 		       bh->outreq, &bh->outreq_busy, &bh->state);
611 	return true;
612 }
613 
614 static int sleep_thread(struct fsg_common *common, bool can_freeze)
615 {
616 	int	rc = 0;
617 
618 	/* Wait until a signal arrives or we are woken up */
619 	for (;;) {
620 		if (can_freeze)
621 			try_to_freeze();
622 		set_current_state(TASK_INTERRUPTIBLE);
623 		if (signal_pending(current)) {
624 			rc = -EINTR;
625 			break;
626 		}
627 		if (common->thread_wakeup_needed)
628 			break;
629 		schedule();
630 	}
631 	__set_current_state(TASK_RUNNING);
632 	common->thread_wakeup_needed = 0;
633 	smp_rmb();	/* ensure the latest bh->state is visible */
634 	return rc;
635 }
636 
637 
638 /*-------------------------------------------------------------------------*/
639 
640 static int do_read(struct fsg_common *common)
641 {
642 	struct fsg_lun		*curlun = common->curlun;
643 	u32			lba;
644 	struct fsg_buffhd	*bh;
645 	int			rc;
646 	u32			amount_left;
647 	loff_t			file_offset, file_offset_tmp;
648 	unsigned int		amount;
649 	ssize_t			nread;
650 
651 	/*
652 	 * Get the starting Logical Block Address and check that it's
653 	 * not too big.
654 	 */
655 	if (common->cmnd[0] == READ_6)
656 		lba = get_unaligned_be24(&common->cmnd[1]);
657 	else {
658 		lba = get_unaligned_be32(&common->cmnd[2]);
659 
660 		/*
661 		 * We allow DPO (Disable Page Out = don't save data in the
662 		 * cache) and FUA (Force Unit Access = don't read from the
663 		 * cache), but we don't implement them.
664 		 */
665 		if ((common->cmnd[1] & ~0x18) != 0) {
666 			curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
667 			return -EINVAL;
668 		}
669 	}
670 	if (lba >= curlun->num_sectors) {
671 		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
672 		return -EINVAL;
673 	}
674 	file_offset = ((loff_t) lba) << curlun->blkbits;
675 
676 	/* Carry out the file reads */
677 	amount_left = common->data_size_from_cmnd;
678 	if (unlikely(amount_left == 0))
679 		return -EIO;		/* No default reply */
680 
681 	for (;;) {
682 		/*
683 		 * Figure out how much we need to read:
684 		 * Try to read the remaining amount.
685 		 * But don't read more than the buffer size.
686 		 * And don't try to read past the end of the file.
687 		 */
688 		amount = min(amount_left, FSG_BUFLEN);
689 		amount = min((loff_t)amount,
690 			     curlun->file_length - file_offset);
691 
692 		/* Wait for the next buffer to become available */
693 		bh = common->next_buffhd_to_fill;
694 		while (bh->state != BUF_STATE_EMPTY) {
695 			rc = sleep_thread(common, false);
696 			if (rc)
697 				return rc;
698 		}
699 
700 		/*
701 		 * If we were asked to read past the end of file,
702 		 * end with an empty buffer.
703 		 */
704 		if (amount == 0) {
705 			curlun->sense_data =
706 					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
707 			curlun->sense_data_info =
708 					file_offset >> curlun->blkbits;
709 			curlun->info_valid = 1;
710 			bh->inreq->length = 0;
711 			bh->state = BUF_STATE_FULL;
712 			break;
713 		}
714 
715 		/* Perform the read */
716 		file_offset_tmp = file_offset;
717 		nread = vfs_read(curlun->filp,
718 				 (char __user *)bh->buf,
719 				 amount, &file_offset_tmp);
720 		VLDBG(curlun, "file read %u @ %llu -> %d\n", amount,
721 		      (unsigned long long)file_offset, (int)nread);
722 		if (signal_pending(current))
723 			return -EINTR;
724 
725 		if (nread < 0) {
726 			LDBG(curlun, "error in file read: %d\n", (int)nread);
727 			nread = 0;
728 		} else if (nread < amount) {
729 			LDBG(curlun, "partial file read: %d/%u\n",
730 			     (int)nread, amount);
731 			nread = round_down(nread, curlun->blksize);
732 		}
733 		file_offset  += nread;
734 		amount_left  -= nread;
735 		common->residue -= nread;
736 
737 		/*
738 		 * Except at the end of the transfer, nread will be
739 		 * equal to the buffer size, which is divisible by the
740 		 * bulk-in maxpacket size.
741 		 */
742 		bh->inreq->length = nread;
743 		bh->state = BUF_STATE_FULL;
744 
745 		/* If an error occurred, report it and its position */
746 		if (nread < amount) {
747 			curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
748 			curlun->sense_data_info =
749 					file_offset >> curlun->blkbits;
750 			curlun->info_valid = 1;
751 			break;
752 		}
753 
754 		if (amount_left == 0)
755 			break;		/* No more left to read */
756 
757 		/* Send this buffer and go read some more */
758 		bh->inreq->zero = 0;
759 		if (!start_in_transfer(common, bh))
760 			/* Don't know what to do if common->fsg is NULL */
761 			return -EIO;
762 		common->next_buffhd_to_fill = bh->next;
763 	}
764 
765 	return -EIO;		/* No default reply */
766 }
767 
768 
769 /*-------------------------------------------------------------------------*/
770 
771 static int do_write(struct fsg_common *common)
772 {
773 	struct fsg_lun		*curlun = common->curlun;
774 	u32			lba;
775 	struct fsg_buffhd	*bh;
776 	int			get_some_more;
777 	u32			amount_left_to_req, amount_left_to_write;
778 	loff_t			usb_offset, file_offset, file_offset_tmp;
779 	unsigned int		amount;
780 	ssize_t			nwritten;
781 	int			rc;
782 
783 	if (curlun->ro) {
784 		curlun->sense_data = SS_WRITE_PROTECTED;
785 		return -EINVAL;
786 	}
787 	spin_lock(&curlun->filp->f_lock);
788 	curlun->filp->f_flags &= ~O_SYNC;	/* Default is not to wait */
789 	spin_unlock(&curlun->filp->f_lock);
790 
791 	/*
792 	 * Get the starting Logical Block Address and check that it's
793 	 * not too big
794 	 */
795 	if (common->cmnd[0] == WRITE_6)
796 		lba = get_unaligned_be24(&common->cmnd[1]);
797 	else {
798 		lba = get_unaligned_be32(&common->cmnd[2]);
799 
800 		/*
801 		 * We allow DPO (Disable Page Out = don't save data in the
802 		 * cache) and FUA (Force Unit Access = write directly to the
803 		 * medium).  We don't implement DPO; we implement FUA by
804 		 * performing synchronous output.
805 		 */
806 		if (common->cmnd[1] & ~0x18) {
807 			curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
808 			return -EINVAL;
809 		}
810 		if (!curlun->nofua && (common->cmnd[1] & 0x08)) { /* FUA */
811 			spin_lock(&curlun->filp->f_lock);
812 			curlun->filp->f_flags |= O_SYNC;
813 			spin_unlock(&curlun->filp->f_lock);
814 		}
815 	}
816 	if (lba >= curlun->num_sectors) {
817 		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
818 		return -EINVAL;
819 	}
820 
821 	/* Carry out the file writes */
822 	get_some_more = 1;
823 	file_offset = usb_offset = ((loff_t) lba) << curlun->blkbits;
824 	amount_left_to_req = common->data_size_from_cmnd;
825 	amount_left_to_write = common->data_size_from_cmnd;
826 
827 	while (amount_left_to_write > 0) {
828 
829 		/* Queue a request for more data from the host */
830 		bh = common->next_buffhd_to_fill;
831 		if (bh->state == BUF_STATE_EMPTY && get_some_more) {
832 
833 			/*
834 			 * Figure out how much we want to get:
835 			 * Try to get the remaining amount,
836 			 * but not more than the buffer size.
837 			 */
838 			amount = min(amount_left_to_req, FSG_BUFLEN);
839 
840 			/* Beyond the end of the backing file? */
841 			if (usb_offset >= curlun->file_length) {
842 				get_some_more = 0;
843 				curlun->sense_data =
844 					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
845 				curlun->sense_data_info =
846 					usb_offset >> curlun->blkbits;
847 				curlun->info_valid = 1;
848 				continue;
849 			}
850 
851 			/* Get the next buffer */
852 			usb_offset += amount;
853 			common->usb_amount_left -= amount;
854 			amount_left_to_req -= amount;
855 			if (amount_left_to_req == 0)
856 				get_some_more = 0;
857 
858 			/*
859 			 * Except at the end of the transfer, amount will be
860 			 * equal to the buffer size, which is divisible by
861 			 * the bulk-out maxpacket size.
862 			 */
863 			set_bulk_out_req_length(common, bh, amount);
864 			if (!start_out_transfer(common, bh))
865 				/* Dunno what to do if common->fsg is NULL */
866 				return -EIO;
867 			common->next_buffhd_to_fill = bh->next;
868 			continue;
869 		}
870 
871 		/* Write the received data to the backing file */
872 		bh = common->next_buffhd_to_drain;
873 		if (bh->state == BUF_STATE_EMPTY && !get_some_more)
874 			break;			/* We stopped early */
875 		if (bh->state == BUF_STATE_FULL) {
876 			smp_rmb();
877 			common->next_buffhd_to_drain = bh->next;
878 			bh->state = BUF_STATE_EMPTY;
879 
880 			/* Did something go wrong with the transfer? */
881 			if (bh->outreq->status != 0) {
882 				curlun->sense_data = SS_COMMUNICATION_FAILURE;
883 				curlun->sense_data_info =
884 					file_offset >> curlun->blkbits;
885 				curlun->info_valid = 1;
886 				break;
887 			}
888 
889 			amount = bh->outreq->actual;
890 			if (curlun->file_length - file_offset < amount) {
891 				LERROR(curlun,
892 				       "write %u @ %llu beyond end %llu\n",
893 				       amount, (unsigned long long)file_offset,
894 				       (unsigned long long)curlun->file_length);
895 				amount = curlun->file_length - file_offset;
896 			}
897 
898 			/* Don't accept excess data.  The spec doesn't say
899 			 * what to do in this case.  We'll ignore the error.
900 			 */
901 			amount = min(amount, bh->bulk_out_intended_length);
902 
903 			/* Don't write a partial block */
904 			amount = round_down(amount, curlun->blksize);
905 			if (amount == 0)
906 				goto empty_write;
907 
908 			/* Perform the write */
909 			file_offset_tmp = file_offset;
910 			nwritten = vfs_write(curlun->filp,
911 					     (char __user *)bh->buf,
912 					     amount, &file_offset_tmp);
913 			VLDBG(curlun, "file write %u @ %llu -> %d\n", amount,
914 			      (unsigned long long)file_offset, (int)nwritten);
915 			if (signal_pending(current))
916 				return -EINTR;		/* Interrupted! */
917 
918 			if (nwritten < 0) {
919 				LDBG(curlun, "error in file write: %d\n",
920 				     (int)nwritten);
921 				nwritten = 0;
922 			} else if (nwritten < amount) {
923 				LDBG(curlun, "partial file write: %d/%u\n",
924 				     (int)nwritten, amount);
925 				nwritten = round_down(nwritten, curlun->blksize);
926 			}
927 			file_offset += nwritten;
928 			amount_left_to_write -= nwritten;
929 			common->residue -= nwritten;
930 
931 			/* If an error occurred, report it and its position */
932 			if (nwritten < amount) {
933 				curlun->sense_data = SS_WRITE_ERROR;
934 				curlun->sense_data_info =
935 					file_offset >> curlun->blkbits;
936 				curlun->info_valid = 1;
937 				break;
938 			}
939 
940  empty_write:
941 			/* Did the host decide to stop early? */
942 			if (bh->outreq->actual < bh->bulk_out_intended_length) {
943 				common->short_packet_received = 1;
944 				break;
945 			}
946 			continue;
947 		}
948 
949 		/* Wait for something to happen */
950 		rc = sleep_thread(common, false);
951 		if (rc)
952 			return rc;
953 	}
954 
955 	return -EIO;		/* No default reply */
956 }
957 
958 
959 /*-------------------------------------------------------------------------*/
960 
961 static int do_synchronize_cache(struct fsg_common *common)
962 {
963 	struct fsg_lun	*curlun = common->curlun;
964 	int		rc;
965 
966 	/* We ignore the requested LBA and write out all file's
967 	 * dirty data buffers. */
968 	rc = fsg_lun_fsync_sub(curlun);
969 	if (rc)
970 		curlun->sense_data = SS_WRITE_ERROR;
971 	return 0;
972 }
973 
974 
975 /*-------------------------------------------------------------------------*/
976 
977 static void invalidate_sub(struct fsg_lun *curlun)
978 {
979 	struct file	*filp = curlun->filp;
980 	struct inode	*inode = file_inode(filp);
981 	unsigned long	rc;
982 
983 	rc = invalidate_mapping_pages(inode->i_mapping, 0, -1);
984 	VLDBG(curlun, "invalidate_mapping_pages -> %ld\n", rc);
985 }
986 
987 static int do_verify(struct fsg_common *common)
988 {
989 	struct fsg_lun		*curlun = common->curlun;
990 	u32			lba;
991 	u32			verification_length;
992 	struct fsg_buffhd	*bh = common->next_buffhd_to_fill;
993 	loff_t			file_offset, file_offset_tmp;
994 	u32			amount_left;
995 	unsigned int		amount;
996 	ssize_t			nread;
997 
998 	/*
999 	 * Get the starting Logical Block Address and check that it's
1000 	 * not too big.
1001 	 */
1002 	lba = get_unaligned_be32(&common->cmnd[2]);
1003 	if (lba >= curlun->num_sectors) {
1004 		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
1005 		return -EINVAL;
1006 	}
1007 
1008 	/*
1009 	 * We allow DPO (Disable Page Out = don't save data in the
1010 	 * cache) but we don't implement it.
1011 	 */
1012 	if (common->cmnd[1] & ~0x10) {
1013 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1014 		return -EINVAL;
1015 	}
1016 
1017 	verification_length = get_unaligned_be16(&common->cmnd[7]);
1018 	if (unlikely(verification_length == 0))
1019 		return -EIO;		/* No default reply */
1020 
1021 	/* Prepare to carry out the file verify */
1022 	amount_left = verification_length << curlun->blkbits;
1023 	file_offset = ((loff_t) lba) << curlun->blkbits;
1024 
1025 	/* Write out all the dirty buffers before invalidating them */
1026 	fsg_lun_fsync_sub(curlun);
1027 	if (signal_pending(current))
1028 		return -EINTR;
1029 
1030 	invalidate_sub(curlun);
1031 	if (signal_pending(current))
1032 		return -EINTR;
1033 
1034 	/* Just try to read the requested blocks */
1035 	while (amount_left > 0) {
1036 		/*
1037 		 * Figure out how much we need to read:
1038 		 * Try to read the remaining amount, but not more than
1039 		 * the buffer size.
1040 		 * And don't try to read past the end of the file.
1041 		 */
1042 		amount = min(amount_left, FSG_BUFLEN);
1043 		amount = min((loff_t)amount,
1044 			     curlun->file_length - file_offset);
1045 		if (amount == 0) {
1046 			curlun->sense_data =
1047 					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
1048 			curlun->sense_data_info =
1049 				file_offset >> curlun->blkbits;
1050 			curlun->info_valid = 1;
1051 			break;
1052 		}
1053 
1054 		/* Perform the read */
1055 		file_offset_tmp = file_offset;
1056 		nread = vfs_read(curlun->filp,
1057 				(char __user *) bh->buf,
1058 				amount, &file_offset_tmp);
1059 		VLDBG(curlun, "file read %u @ %llu -> %d\n", amount,
1060 				(unsigned long long) file_offset,
1061 				(int) nread);
1062 		if (signal_pending(current))
1063 			return -EINTR;
1064 
1065 		if (nread < 0) {
1066 			LDBG(curlun, "error in file verify: %d\n", (int)nread);
1067 			nread = 0;
1068 		} else if (nread < amount) {
1069 			LDBG(curlun, "partial file verify: %d/%u\n",
1070 			     (int)nread, amount);
1071 			nread = round_down(nread, curlun->blksize);
1072 		}
1073 		if (nread == 0) {
1074 			curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
1075 			curlun->sense_data_info =
1076 				file_offset >> curlun->blkbits;
1077 			curlun->info_valid = 1;
1078 			break;
1079 		}
1080 		file_offset += nread;
1081 		amount_left -= nread;
1082 	}
1083 	return 0;
1084 }
1085 
1086 
1087 /*-------------------------------------------------------------------------*/
1088 
1089 static int do_inquiry(struct fsg_common *common, struct fsg_buffhd *bh)
1090 {
1091 	struct fsg_lun *curlun = common->curlun;
1092 	u8	*buf = (u8 *) bh->buf;
1093 
1094 	if (!curlun) {		/* Unsupported LUNs are okay */
1095 		common->bad_lun_okay = 1;
1096 		memset(buf, 0, 36);
1097 		buf[0] = TYPE_NO_LUN;	/* Unsupported, no device-type */
1098 		buf[4] = 31;		/* Additional length */
1099 		return 36;
1100 	}
1101 
1102 	buf[0] = curlun->cdrom ? TYPE_ROM : TYPE_DISK;
1103 	buf[1] = curlun->removable ? 0x80 : 0;
1104 	buf[2] = 2;		/* ANSI SCSI level 2 */
1105 	buf[3] = 2;		/* SCSI-2 INQUIRY data format */
1106 	buf[4] = 31;		/* Additional length */
1107 	buf[5] = 0;		/* No special options */
1108 	buf[6] = 0;
1109 	buf[7] = 0;
1110 	memcpy(buf + 8, common->inquiry_string, sizeof common->inquiry_string);
1111 	return 36;
1112 }
1113 
1114 static int do_request_sense(struct fsg_common *common, struct fsg_buffhd *bh)
1115 {
1116 	struct fsg_lun	*curlun = common->curlun;
1117 	u8		*buf = (u8 *) bh->buf;
1118 	u32		sd, sdinfo;
1119 	int		valid;
1120 
1121 	/*
1122 	 * From the SCSI-2 spec., section 7.9 (Unit attention condition):
1123 	 *
1124 	 * If a REQUEST SENSE command is received from an initiator
1125 	 * with a pending unit attention condition (before the target
1126 	 * generates the contingent allegiance condition), then the
1127 	 * target shall either:
1128 	 *   a) report any pending sense data and preserve the unit
1129 	 *	attention condition on the logical unit, or,
1130 	 *   b) report the unit attention condition, may discard any
1131 	 *	pending sense data, and clear the unit attention
1132 	 *	condition on the logical unit for that initiator.
1133 	 *
1134 	 * FSG normally uses option a); enable this code to use option b).
1135 	 */
1136 #if 0
1137 	if (curlun && curlun->unit_attention_data != SS_NO_SENSE) {
1138 		curlun->sense_data = curlun->unit_attention_data;
1139 		curlun->unit_attention_data = SS_NO_SENSE;
1140 	}
1141 #endif
1142 
1143 	if (!curlun) {		/* Unsupported LUNs are okay */
1144 		common->bad_lun_okay = 1;
1145 		sd = SS_LOGICAL_UNIT_NOT_SUPPORTED;
1146 		sdinfo = 0;
1147 		valid = 0;
1148 	} else {
1149 		sd = curlun->sense_data;
1150 		sdinfo = curlun->sense_data_info;
1151 		valid = curlun->info_valid << 7;
1152 		curlun->sense_data = SS_NO_SENSE;
1153 		curlun->sense_data_info = 0;
1154 		curlun->info_valid = 0;
1155 	}
1156 
1157 	memset(buf, 0, 18);
1158 	buf[0] = valid | 0x70;			/* Valid, current error */
1159 	buf[2] = SK(sd);
1160 	put_unaligned_be32(sdinfo, &buf[3]);	/* Sense information */
1161 	buf[7] = 18 - 8;			/* Additional sense length */
1162 	buf[12] = ASC(sd);
1163 	buf[13] = ASCQ(sd);
1164 	return 18;
1165 }
1166 
1167 static int do_read_capacity(struct fsg_common *common, struct fsg_buffhd *bh)
1168 {
1169 	struct fsg_lun	*curlun = common->curlun;
1170 	u32		lba = get_unaligned_be32(&common->cmnd[2]);
1171 	int		pmi = common->cmnd[8];
1172 	u8		*buf = (u8 *)bh->buf;
1173 
1174 	/* Check the PMI and LBA fields */
1175 	if (pmi > 1 || (pmi == 0 && lba != 0)) {
1176 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1177 		return -EINVAL;
1178 	}
1179 
1180 	put_unaligned_be32(curlun->num_sectors - 1, &buf[0]);
1181 						/* Max logical block */
1182 	put_unaligned_be32(curlun->blksize, &buf[4]);/* Block length */
1183 	return 8;
1184 }
1185 
1186 static int do_read_header(struct fsg_common *common, struct fsg_buffhd *bh)
1187 {
1188 	struct fsg_lun	*curlun = common->curlun;
1189 	int		msf = common->cmnd[1] & 0x02;
1190 	u32		lba = get_unaligned_be32(&common->cmnd[2]);
1191 	u8		*buf = (u8 *)bh->buf;
1192 
1193 	if (common->cmnd[1] & ~0x02) {		/* Mask away MSF */
1194 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1195 		return -EINVAL;
1196 	}
1197 	if (lba >= curlun->num_sectors) {
1198 		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
1199 		return -EINVAL;
1200 	}
1201 
1202 	memset(buf, 0, 8);
1203 	buf[0] = 0x01;		/* 2048 bytes of user data, rest is EC */
1204 	store_cdrom_address(&buf[4], msf, lba);
1205 	return 8;
1206 }
1207 
1208 static int do_read_toc(struct fsg_common *common, struct fsg_buffhd *bh)
1209 {
1210 	struct fsg_lun	*curlun = common->curlun;
1211 	int		msf = common->cmnd[1] & 0x02;
1212 	int		start_track = common->cmnd[6];
1213 	u8		*buf = (u8 *)bh->buf;
1214 
1215 	if ((common->cmnd[1] & ~0x02) != 0 ||	/* Mask away MSF */
1216 			start_track > 1) {
1217 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1218 		return -EINVAL;
1219 	}
1220 
1221 	memset(buf, 0, 20);
1222 	buf[1] = (20-2);		/* TOC data length */
1223 	buf[2] = 1;			/* First track number */
1224 	buf[3] = 1;			/* Last track number */
1225 	buf[5] = 0x16;			/* Data track, copying allowed */
1226 	buf[6] = 0x01;			/* Only track is number 1 */
1227 	store_cdrom_address(&buf[8], msf, 0);
1228 
1229 	buf[13] = 0x16;			/* Lead-out track is data */
1230 	buf[14] = 0xAA;			/* Lead-out track number */
1231 	store_cdrom_address(&buf[16], msf, curlun->num_sectors);
1232 	return 20;
1233 }
1234 
1235 static int do_mode_sense(struct fsg_common *common, struct fsg_buffhd *bh)
1236 {
1237 	struct fsg_lun	*curlun = common->curlun;
1238 	int		mscmnd = common->cmnd[0];
1239 	u8		*buf = (u8 *) bh->buf;
1240 	u8		*buf0 = buf;
1241 	int		pc, page_code;
1242 	int		changeable_values, all_pages;
1243 	int		valid_page = 0;
1244 	int		len, limit;
1245 
1246 	if ((common->cmnd[1] & ~0x08) != 0) {	/* Mask away DBD */
1247 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1248 		return -EINVAL;
1249 	}
1250 	pc = common->cmnd[2] >> 6;
1251 	page_code = common->cmnd[2] & 0x3f;
1252 	if (pc == 3) {
1253 		curlun->sense_data = SS_SAVING_PARAMETERS_NOT_SUPPORTED;
1254 		return -EINVAL;
1255 	}
1256 	changeable_values = (pc == 1);
1257 	all_pages = (page_code == 0x3f);
1258 
1259 	/*
1260 	 * Write the mode parameter header.  Fixed values are: default
1261 	 * medium type, no cache control (DPOFUA), and no block descriptors.
1262 	 * The only variable value is the WriteProtect bit.  We will fill in
1263 	 * the mode data length later.
1264 	 */
1265 	memset(buf, 0, 8);
1266 	if (mscmnd == MODE_SENSE) {
1267 		buf[2] = (curlun->ro ? 0x80 : 0x00);		/* WP, DPOFUA */
1268 		buf += 4;
1269 		limit = 255;
1270 	} else {			/* MODE_SENSE_10 */
1271 		buf[3] = (curlun->ro ? 0x80 : 0x00);		/* WP, DPOFUA */
1272 		buf += 8;
1273 		limit = 65535;		/* Should really be FSG_BUFLEN */
1274 	}
1275 
1276 	/* No block descriptors */
1277 
1278 	/*
1279 	 * The mode pages, in numerical order.  The only page we support
1280 	 * is the Caching page.
1281 	 */
1282 	if (page_code == 0x08 || all_pages) {
1283 		valid_page = 1;
1284 		buf[0] = 0x08;		/* Page code */
1285 		buf[1] = 10;		/* Page length */
1286 		memset(buf+2, 0, 10);	/* None of the fields are changeable */
1287 
1288 		if (!changeable_values) {
1289 			buf[2] = 0x04;	/* Write cache enable, */
1290 					/* Read cache not disabled */
1291 					/* No cache retention priorities */
1292 			put_unaligned_be16(0xffff, &buf[4]);
1293 					/* Don't disable prefetch */
1294 					/* Minimum prefetch = 0 */
1295 			put_unaligned_be16(0xffff, &buf[8]);
1296 					/* Maximum prefetch */
1297 			put_unaligned_be16(0xffff, &buf[10]);
1298 					/* Maximum prefetch ceiling */
1299 		}
1300 		buf += 12;
1301 	}
1302 
1303 	/*
1304 	 * Check that a valid page was requested and the mode data length
1305 	 * isn't too long.
1306 	 */
1307 	len = buf - buf0;
1308 	if (!valid_page || len > limit) {
1309 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1310 		return -EINVAL;
1311 	}
1312 
1313 	/*  Store the mode data length */
1314 	if (mscmnd == MODE_SENSE)
1315 		buf0[0] = len - 1;
1316 	else
1317 		put_unaligned_be16(len - 2, buf0);
1318 	return len;
1319 }
1320 
1321 static int do_start_stop(struct fsg_common *common)
1322 {
1323 	struct fsg_lun	*curlun = common->curlun;
1324 	int		loej, start;
1325 
1326 	if (!curlun) {
1327 		return -EINVAL;
1328 	} else if (!curlun->removable) {
1329 		curlun->sense_data = SS_INVALID_COMMAND;
1330 		return -EINVAL;
1331 	} else if ((common->cmnd[1] & ~0x01) != 0 || /* Mask away Immed */
1332 		   (common->cmnd[4] & ~0x03) != 0) { /* Mask LoEj, Start */
1333 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1334 		return -EINVAL;
1335 	}
1336 
1337 	loej  = common->cmnd[4] & 0x02;
1338 	start = common->cmnd[4] & 0x01;
1339 
1340 	/*
1341 	 * Our emulation doesn't support mounting; the medium is
1342 	 * available for use as soon as it is loaded.
1343 	 */
1344 	if (start) {
1345 		if (!fsg_lun_is_open(curlun)) {
1346 			curlun->sense_data = SS_MEDIUM_NOT_PRESENT;
1347 			return -EINVAL;
1348 		}
1349 		return 0;
1350 	}
1351 
1352 	/* Are we allowed to unload the media? */
1353 	if (curlun->prevent_medium_removal) {
1354 		LDBG(curlun, "unload attempt prevented\n");
1355 		curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED;
1356 		return -EINVAL;
1357 	}
1358 
1359 	if (!loej)
1360 		return 0;
1361 
1362 	up_read(&common->filesem);
1363 	down_write(&common->filesem);
1364 	fsg_lun_close(curlun);
1365 	up_write(&common->filesem);
1366 	down_read(&common->filesem);
1367 
1368 	return 0;
1369 }
1370 
1371 static int do_prevent_allow(struct fsg_common *common)
1372 {
1373 	struct fsg_lun	*curlun = common->curlun;
1374 	int		prevent;
1375 
1376 	if (!common->curlun) {
1377 		return -EINVAL;
1378 	} else if (!common->curlun->removable) {
1379 		common->curlun->sense_data = SS_INVALID_COMMAND;
1380 		return -EINVAL;
1381 	}
1382 
1383 	prevent = common->cmnd[4] & 0x01;
1384 	if ((common->cmnd[4] & ~0x01) != 0) {	/* Mask away Prevent */
1385 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1386 		return -EINVAL;
1387 	}
1388 
1389 	if (curlun->prevent_medium_removal && !prevent)
1390 		fsg_lun_fsync_sub(curlun);
1391 	curlun->prevent_medium_removal = prevent;
1392 	return 0;
1393 }
1394 
1395 static int do_read_format_capacities(struct fsg_common *common,
1396 			struct fsg_buffhd *bh)
1397 {
1398 	struct fsg_lun	*curlun = common->curlun;
1399 	u8		*buf = (u8 *) bh->buf;
1400 
1401 	buf[0] = buf[1] = buf[2] = 0;
1402 	buf[3] = 8;	/* Only the Current/Maximum Capacity Descriptor */
1403 	buf += 4;
1404 
1405 	put_unaligned_be32(curlun->num_sectors, &buf[0]);
1406 						/* Number of blocks */
1407 	put_unaligned_be32(curlun->blksize, &buf[4]);/* Block length */
1408 	buf[4] = 0x02;				/* Current capacity */
1409 	return 12;
1410 }
1411 
1412 static int do_mode_select(struct fsg_common *common, struct fsg_buffhd *bh)
1413 {
1414 	struct fsg_lun	*curlun = common->curlun;
1415 
1416 	/* We don't support MODE SELECT */
1417 	if (curlun)
1418 		curlun->sense_data = SS_INVALID_COMMAND;
1419 	return -EINVAL;
1420 }
1421 
1422 
1423 /*-------------------------------------------------------------------------*/
1424 
1425 static int halt_bulk_in_endpoint(struct fsg_dev *fsg)
1426 {
1427 	int	rc;
1428 
1429 	rc = fsg_set_halt(fsg, fsg->bulk_in);
1430 	if (rc == -EAGAIN)
1431 		VDBG(fsg, "delayed bulk-in endpoint halt\n");
1432 	while (rc != 0) {
1433 		if (rc != -EAGAIN) {
1434 			WARNING(fsg, "usb_ep_set_halt -> %d\n", rc);
1435 			rc = 0;
1436 			break;
1437 		}
1438 
1439 		/* Wait for a short time and then try again */
1440 		if (msleep_interruptible(100) != 0)
1441 			return -EINTR;
1442 		rc = usb_ep_set_halt(fsg->bulk_in);
1443 	}
1444 	return rc;
1445 }
1446 
1447 static int wedge_bulk_in_endpoint(struct fsg_dev *fsg)
1448 {
1449 	int	rc;
1450 
1451 	DBG(fsg, "bulk-in set wedge\n");
1452 	rc = usb_ep_set_wedge(fsg->bulk_in);
1453 	if (rc == -EAGAIN)
1454 		VDBG(fsg, "delayed bulk-in endpoint wedge\n");
1455 	while (rc != 0) {
1456 		if (rc != -EAGAIN) {
1457 			WARNING(fsg, "usb_ep_set_wedge -> %d\n", rc);
1458 			rc = 0;
1459 			break;
1460 		}
1461 
1462 		/* Wait for a short time and then try again */
1463 		if (msleep_interruptible(100) != 0)
1464 			return -EINTR;
1465 		rc = usb_ep_set_wedge(fsg->bulk_in);
1466 	}
1467 	return rc;
1468 }
1469 
1470 static int throw_away_data(struct fsg_common *common)
1471 {
1472 	struct fsg_buffhd	*bh;
1473 	u32			amount;
1474 	int			rc;
1475 
1476 	for (bh = common->next_buffhd_to_drain;
1477 	     bh->state != BUF_STATE_EMPTY || common->usb_amount_left > 0;
1478 	     bh = common->next_buffhd_to_drain) {
1479 
1480 		/* Throw away the data in a filled buffer */
1481 		if (bh->state == BUF_STATE_FULL) {
1482 			smp_rmb();
1483 			bh->state = BUF_STATE_EMPTY;
1484 			common->next_buffhd_to_drain = bh->next;
1485 
1486 			/* A short packet or an error ends everything */
1487 			if (bh->outreq->actual < bh->bulk_out_intended_length ||
1488 			    bh->outreq->status != 0) {
1489 				raise_exception(common,
1490 						FSG_STATE_ABORT_BULK_OUT);
1491 				return -EINTR;
1492 			}
1493 			continue;
1494 		}
1495 
1496 		/* Try to submit another request if we need one */
1497 		bh = common->next_buffhd_to_fill;
1498 		if (bh->state == BUF_STATE_EMPTY
1499 		 && common->usb_amount_left > 0) {
1500 			amount = min(common->usb_amount_left, FSG_BUFLEN);
1501 
1502 			/*
1503 			 * Except at the end of the transfer, amount will be
1504 			 * equal to the buffer size, which is divisible by
1505 			 * the bulk-out maxpacket size.
1506 			 */
1507 			set_bulk_out_req_length(common, bh, amount);
1508 			if (!start_out_transfer(common, bh))
1509 				/* Dunno what to do if common->fsg is NULL */
1510 				return -EIO;
1511 			common->next_buffhd_to_fill = bh->next;
1512 			common->usb_amount_left -= amount;
1513 			continue;
1514 		}
1515 
1516 		/* Otherwise wait for something to happen */
1517 		rc = sleep_thread(common, true);
1518 		if (rc)
1519 			return rc;
1520 	}
1521 	return 0;
1522 }
1523 
1524 static int finish_reply(struct fsg_common *common)
1525 {
1526 	struct fsg_buffhd	*bh = common->next_buffhd_to_fill;
1527 	int			rc = 0;
1528 
1529 	switch (common->data_dir) {
1530 	case DATA_DIR_NONE:
1531 		break;			/* Nothing to send */
1532 
1533 	/*
1534 	 * If we don't know whether the host wants to read or write,
1535 	 * this must be CB or CBI with an unknown command.  We mustn't
1536 	 * try to send or receive any data.  So stall both bulk pipes
1537 	 * if we can and wait for a reset.
1538 	 */
1539 	case DATA_DIR_UNKNOWN:
1540 		if (!common->can_stall) {
1541 			/* Nothing */
1542 		} else if (fsg_is_set(common)) {
1543 			fsg_set_halt(common->fsg, common->fsg->bulk_out);
1544 			rc = halt_bulk_in_endpoint(common->fsg);
1545 		} else {
1546 			/* Don't know what to do if common->fsg is NULL */
1547 			rc = -EIO;
1548 		}
1549 		break;
1550 
1551 	/* All but the last buffer of data must have already been sent */
1552 	case DATA_DIR_TO_HOST:
1553 		if (common->data_size == 0) {
1554 			/* Nothing to send */
1555 
1556 		/* Don't know what to do if common->fsg is NULL */
1557 		} else if (!fsg_is_set(common)) {
1558 			rc = -EIO;
1559 
1560 		/* If there's no residue, simply send the last buffer */
1561 		} else if (common->residue == 0) {
1562 			bh->inreq->zero = 0;
1563 			if (!start_in_transfer(common, bh))
1564 				return -EIO;
1565 			common->next_buffhd_to_fill = bh->next;
1566 
1567 		/*
1568 		 * For Bulk-only, mark the end of the data with a short
1569 		 * packet.  If we are allowed to stall, halt the bulk-in
1570 		 * endpoint.  (Note: This violates the Bulk-Only Transport
1571 		 * specification, which requires us to pad the data if we
1572 		 * don't halt the endpoint.  Presumably nobody will mind.)
1573 		 */
1574 		} else {
1575 			bh->inreq->zero = 1;
1576 			if (!start_in_transfer(common, bh))
1577 				rc = -EIO;
1578 			common->next_buffhd_to_fill = bh->next;
1579 			if (common->can_stall)
1580 				rc = halt_bulk_in_endpoint(common->fsg);
1581 		}
1582 		break;
1583 
1584 	/*
1585 	 * We have processed all we want from the data the host has sent.
1586 	 * There may still be outstanding bulk-out requests.
1587 	 */
1588 	case DATA_DIR_FROM_HOST:
1589 		if (common->residue == 0) {
1590 			/* Nothing to receive */
1591 
1592 		/* Did the host stop sending unexpectedly early? */
1593 		} else if (common->short_packet_received) {
1594 			raise_exception(common, FSG_STATE_ABORT_BULK_OUT);
1595 			rc = -EINTR;
1596 
1597 		/*
1598 		 * We haven't processed all the incoming data.  Even though
1599 		 * we may be allowed to stall, doing so would cause a race.
1600 		 * The controller may already have ACK'ed all the remaining
1601 		 * bulk-out packets, in which case the host wouldn't see a
1602 		 * STALL.  Not realizing the endpoint was halted, it wouldn't
1603 		 * clear the halt -- leading to problems later on.
1604 		 */
1605 #if 0
1606 		} else if (common->can_stall) {
1607 			if (fsg_is_set(common))
1608 				fsg_set_halt(common->fsg,
1609 					     common->fsg->bulk_out);
1610 			raise_exception(common, FSG_STATE_ABORT_BULK_OUT);
1611 			rc = -EINTR;
1612 #endif
1613 
1614 		/*
1615 		 * We can't stall.  Read in the excess data and throw it
1616 		 * all away.
1617 		 */
1618 		} else {
1619 			rc = throw_away_data(common);
1620 		}
1621 		break;
1622 	}
1623 	return rc;
1624 }
1625 
1626 static int send_status(struct fsg_common *common)
1627 {
1628 	struct fsg_lun		*curlun = common->curlun;
1629 	struct fsg_buffhd	*bh;
1630 	struct bulk_cs_wrap	*csw;
1631 	int			rc;
1632 	u8			status = US_BULK_STAT_OK;
1633 	u32			sd, sdinfo = 0;
1634 
1635 	/* Wait for the next buffer to become available */
1636 	bh = common->next_buffhd_to_fill;
1637 	while (bh->state != BUF_STATE_EMPTY) {
1638 		rc = sleep_thread(common, true);
1639 		if (rc)
1640 			return rc;
1641 	}
1642 
1643 	if (curlun) {
1644 		sd = curlun->sense_data;
1645 		sdinfo = curlun->sense_data_info;
1646 	} else if (common->bad_lun_okay)
1647 		sd = SS_NO_SENSE;
1648 	else
1649 		sd = SS_LOGICAL_UNIT_NOT_SUPPORTED;
1650 
1651 	if (common->phase_error) {
1652 		DBG(common, "sending phase-error status\n");
1653 		status = US_BULK_STAT_PHASE;
1654 		sd = SS_INVALID_COMMAND;
1655 	} else if (sd != SS_NO_SENSE) {
1656 		DBG(common, "sending command-failure status\n");
1657 		status = US_BULK_STAT_FAIL;
1658 		VDBG(common, "  sense data: SK x%02x, ASC x%02x, ASCQ x%02x;"
1659 				"  info x%x\n",
1660 				SK(sd), ASC(sd), ASCQ(sd), sdinfo);
1661 	}
1662 
1663 	/* Store and send the Bulk-only CSW */
1664 	csw = (void *)bh->buf;
1665 
1666 	csw->Signature = cpu_to_le32(US_BULK_CS_SIGN);
1667 	csw->Tag = common->tag;
1668 	csw->Residue = cpu_to_le32(common->residue);
1669 	csw->Status = status;
1670 
1671 	bh->inreq->length = US_BULK_CS_WRAP_LEN;
1672 	bh->inreq->zero = 0;
1673 	if (!start_in_transfer(common, bh))
1674 		/* Don't know what to do if common->fsg is NULL */
1675 		return -EIO;
1676 
1677 	common->next_buffhd_to_fill = bh->next;
1678 	return 0;
1679 }
1680 
1681 
1682 /*-------------------------------------------------------------------------*/
1683 
1684 /*
1685  * Check whether the command is properly formed and whether its data size
1686  * and direction agree with the values we already have.
1687  */
1688 static int check_command(struct fsg_common *common, int cmnd_size,
1689 			 enum data_direction data_dir, unsigned int mask,
1690 			 int needs_medium, const char *name)
1691 {
1692 	int			i;
1693 	unsigned int		lun = common->cmnd[1] >> 5;
1694 	static const char	dirletter[4] = {'u', 'o', 'i', 'n'};
1695 	char			hdlen[20];
1696 	struct fsg_lun		*curlun;
1697 
1698 	hdlen[0] = 0;
1699 	if (common->data_dir != DATA_DIR_UNKNOWN)
1700 		sprintf(hdlen, ", H%c=%u", dirletter[(int) common->data_dir],
1701 			common->data_size);
1702 	VDBG(common, "SCSI command: %s;  Dc=%d, D%c=%u;  Hc=%d%s\n",
1703 	     name, cmnd_size, dirletter[(int) data_dir],
1704 	     common->data_size_from_cmnd, common->cmnd_size, hdlen);
1705 
1706 	/*
1707 	 * We can't reply at all until we know the correct data direction
1708 	 * and size.
1709 	 */
1710 	if (common->data_size_from_cmnd == 0)
1711 		data_dir = DATA_DIR_NONE;
1712 	if (common->data_size < common->data_size_from_cmnd) {
1713 		/*
1714 		 * Host data size < Device data size is a phase error.
1715 		 * Carry out the command, but only transfer as much as
1716 		 * we are allowed.
1717 		 */
1718 		common->data_size_from_cmnd = common->data_size;
1719 		common->phase_error = 1;
1720 	}
1721 	common->residue = common->data_size;
1722 	common->usb_amount_left = common->data_size;
1723 
1724 	/* Conflicting data directions is a phase error */
1725 	if (common->data_dir != data_dir && common->data_size_from_cmnd > 0) {
1726 		common->phase_error = 1;
1727 		return -EINVAL;
1728 	}
1729 
1730 	/* Verify the length of the command itself */
1731 	if (cmnd_size != common->cmnd_size) {
1732 
1733 		/*
1734 		 * Special case workaround: There are plenty of buggy SCSI
1735 		 * implementations. Many have issues with cbw->Length
1736 		 * field passing a wrong command size. For those cases we
1737 		 * always try to work around the problem by using the length
1738 		 * sent by the host side provided it is at least as large
1739 		 * as the correct command length.
1740 		 * Examples of such cases would be MS-Windows, which issues
1741 		 * REQUEST SENSE with cbw->Length == 12 where it should
1742 		 * be 6, and xbox360 issuing INQUIRY, TEST UNIT READY and
1743 		 * REQUEST SENSE with cbw->Length == 10 where it should
1744 		 * be 6 as well.
1745 		 */
1746 		if (cmnd_size <= common->cmnd_size) {
1747 			DBG(common, "%s is buggy! Expected length %d "
1748 			    "but we got %d\n", name,
1749 			    cmnd_size, common->cmnd_size);
1750 			cmnd_size = common->cmnd_size;
1751 		} else {
1752 			common->phase_error = 1;
1753 			return -EINVAL;
1754 		}
1755 	}
1756 
1757 	/* Check that the LUN values are consistent */
1758 	if (common->lun != lun)
1759 		DBG(common, "using LUN %u from CBW, not LUN %u from CDB\n",
1760 		    common->lun, lun);
1761 
1762 	/* Check the LUN */
1763 	curlun = common->curlun;
1764 	if (curlun) {
1765 		if (common->cmnd[0] != REQUEST_SENSE) {
1766 			curlun->sense_data = SS_NO_SENSE;
1767 			curlun->sense_data_info = 0;
1768 			curlun->info_valid = 0;
1769 		}
1770 	} else {
1771 		common->bad_lun_okay = 0;
1772 
1773 		/*
1774 		 * INQUIRY and REQUEST SENSE commands are explicitly allowed
1775 		 * to use unsupported LUNs; all others may not.
1776 		 */
1777 		if (common->cmnd[0] != INQUIRY &&
1778 		    common->cmnd[0] != REQUEST_SENSE) {
1779 			DBG(common, "unsupported LUN %u\n", common->lun);
1780 			return -EINVAL;
1781 		}
1782 	}
1783 
1784 	/*
1785 	 * If a unit attention condition exists, only INQUIRY and
1786 	 * REQUEST SENSE commands are allowed; anything else must fail.
1787 	 */
1788 	if (curlun && curlun->unit_attention_data != SS_NO_SENSE &&
1789 	    common->cmnd[0] != INQUIRY &&
1790 	    common->cmnd[0] != REQUEST_SENSE) {
1791 		curlun->sense_data = curlun->unit_attention_data;
1792 		curlun->unit_attention_data = SS_NO_SENSE;
1793 		return -EINVAL;
1794 	}
1795 
1796 	/* Check that only command bytes listed in the mask are non-zero */
1797 	common->cmnd[1] &= 0x1f;			/* Mask away the LUN */
1798 	for (i = 1; i < cmnd_size; ++i) {
1799 		if (common->cmnd[i] && !(mask & (1 << i))) {
1800 			if (curlun)
1801 				curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1802 			return -EINVAL;
1803 		}
1804 	}
1805 
1806 	/* If the medium isn't mounted and the command needs to access
1807 	 * it, return an error. */
1808 	if (curlun && !fsg_lun_is_open(curlun) && needs_medium) {
1809 		curlun->sense_data = SS_MEDIUM_NOT_PRESENT;
1810 		return -EINVAL;
1811 	}
1812 
1813 	return 0;
1814 }
1815 
1816 /* wrapper of check_command for data size in blocks handling */
1817 static int check_command_size_in_blocks(struct fsg_common *common,
1818 		int cmnd_size, enum data_direction data_dir,
1819 		unsigned int mask, int needs_medium, const char *name)
1820 {
1821 	if (common->curlun)
1822 		common->data_size_from_cmnd <<= common->curlun->blkbits;
1823 	return check_command(common, cmnd_size, data_dir,
1824 			mask, needs_medium, name);
1825 }
1826 
1827 static int do_scsi_command(struct fsg_common *common)
1828 {
1829 	struct fsg_buffhd	*bh;
1830 	int			rc;
1831 	int			reply = -EINVAL;
1832 	int			i;
1833 	static char		unknown[16];
1834 
1835 	dump_cdb(common);
1836 
1837 	/* Wait for the next buffer to become available for data or status */
1838 	bh = common->next_buffhd_to_fill;
1839 	common->next_buffhd_to_drain = bh;
1840 	while (bh->state != BUF_STATE_EMPTY) {
1841 		rc = sleep_thread(common, true);
1842 		if (rc)
1843 			return rc;
1844 	}
1845 	common->phase_error = 0;
1846 	common->short_packet_received = 0;
1847 
1848 	down_read(&common->filesem);	/* We're using the backing file */
1849 	switch (common->cmnd[0]) {
1850 
1851 	case INQUIRY:
1852 		common->data_size_from_cmnd = common->cmnd[4];
1853 		reply = check_command(common, 6, DATA_DIR_TO_HOST,
1854 				      (1<<4), 0,
1855 				      "INQUIRY");
1856 		if (reply == 0)
1857 			reply = do_inquiry(common, bh);
1858 		break;
1859 
1860 	case MODE_SELECT:
1861 		common->data_size_from_cmnd = common->cmnd[4];
1862 		reply = check_command(common, 6, DATA_DIR_FROM_HOST,
1863 				      (1<<1) | (1<<4), 0,
1864 				      "MODE SELECT(6)");
1865 		if (reply == 0)
1866 			reply = do_mode_select(common, bh);
1867 		break;
1868 
1869 	case MODE_SELECT_10:
1870 		common->data_size_from_cmnd =
1871 			get_unaligned_be16(&common->cmnd[7]);
1872 		reply = check_command(common, 10, DATA_DIR_FROM_HOST,
1873 				      (1<<1) | (3<<7), 0,
1874 				      "MODE SELECT(10)");
1875 		if (reply == 0)
1876 			reply = do_mode_select(common, bh);
1877 		break;
1878 
1879 	case MODE_SENSE:
1880 		common->data_size_from_cmnd = common->cmnd[4];
1881 		reply = check_command(common, 6, DATA_DIR_TO_HOST,
1882 				      (1<<1) | (1<<2) | (1<<4), 0,
1883 				      "MODE SENSE(6)");
1884 		if (reply == 0)
1885 			reply = do_mode_sense(common, bh);
1886 		break;
1887 
1888 	case MODE_SENSE_10:
1889 		common->data_size_from_cmnd =
1890 			get_unaligned_be16(&common->cmnd[7]);
1891 		reply = check_command(common, 10, DATA_DIR_TO_HOST,
1892 				      (1<<1) | (1<<2) | (3<<7), 0,
1893 				      "MODE SENSE(10)");
1894 		if (reply == 0)
1895 			reply = do_mode_sense(common, bh);
1896 		break;
1897 
1898 	case ALLOW_MEDIUM_REMOVAL:
1899 		common->data_size_from_cmnd = 0;
1900 		reply = check_command(common, 6, DATA_DIR_NONE,
1901 				      (1<<4), 0,
1902 				      "PREVENT-ALLOW MEDIUM REMOVAL");
1903 		if (reply == 0)
1904 			reply = do_prevent_allow(common);
1905 		break;
1906 
1907 	case READ_6:
1908 		i = common->cmnd[4];
1909 		common->data_size_from_cmnd = (i == 0) ? 256 : i;
1910 		reply = check_command_size_in_blocks(common, 6,
1911 				      DATA_DIR_TO_HOST,
1912 				      (7<<1) | (1<<4), 1,
1913 				      "READ(6)");
1914 		if (reply == 0)
1915 			reply = do_read(common);
1916 		break;
1917 
1918 	case READ_10:
1919 		common->data_size_from_cmnd =
1920 				get_unaligned_be16(&common->cmnd[7]);
1921 		reply = check_command_size_in_blocks(common, 10,
1922 				      DATA_DIR_TO_HOST,
1923 				      (1<<1) | (0xf<<2) | (3<<7), 1,
1924 				      "READ(10)");
1925 		if (reply == 0)
1926 			reply = do_read(common);
1927 		break;
1928 
1929 	case READ_12:
1930 		common->data_size_from_cmnd =
1931 				get_unaligned_be32(&common->cmnd[6]);
1932 		reply = check_command_size_in_blocks(common, 12,
1933 				      DATA_DIR_TO_HOST,
1934 				      (1<<1) | (0xf<<2) | (0xf<<6), 1,
1935 				      "READ(12)");
1936 		if (reply == 0)
1937 			reply = do_read(common);
1938 		break;
1939 
1940 	case READ_CAPACITY:
1941 		common->data_size_from_cmnd = 8;
1942 		reply = check_command(common, 10, DATA_DIR_TO_HOST,
1943 				      (0xf<<2) | (1<<8), 1,
1944 				      "READ CAPACITY");
1945 		if (reply == 0)
1946 			reply = do_read_capacity(common, bh);
1947 		break;
1948 
1949 	case READ_HEADER:
1950 		if (!common->curlun || !common->curlun->cdrom)
1951 			goto unknown_cmnd;
1952 		common->data_size_from_cmnd =
1953 			get_unaligned_be16(&common->cmnd[7]);
1954 		reply = check_command(common, 10, DATA_DIR_TO_HOST,
1955 				      (3<<7) | (0x1f<<1), 1,
1956 				      "READ HEADER");
1957 		if (reply == 0)
1958 			reply = do_read_header(common, bh);
1959 		break;
1960 
1961 	case READ_TOC:
1962 		if (!common->curlun || !common->curlun->cdrom)
1963 			goto unknown_cmnd;
1964 		common->data_size_from_cmnd =
1965 			get_unaligned_be16(&common->cmnd[7]);
1966 		reply = check_command(common, 10, DATA_DIR_TO_HOST,
1967 				      (7<<6) | (1<<1), 1,
1968 				      "READ TOC");
1969 		if (reply == 0)
1970 			reply = do_read_toc(common, bh);
1971 		break;
1972 
1973 	case READ_FORMAT_CAPACITIES:
1974 		common->data_size_from_cmnd =
1975 			get_unaligned_be16(&common->cmnd[7]);
1976 		reply = check_command(common, 10, DATA_DIR_TO_HOST,
1977 				      (3<<7), 1,
1978 				      "READ FORMAT CAPACITIES");
1979 		if (reply == 0)
1980 			reply = do_read_format_capacities(common, bh);
1981 		break;
1982 
1983 	case REQUEST_SENSE:
1984 		common->data_size_from_cmnd = common->cmnd[4];
1985 		reply = check_command(common, 6, DATA_DIR_TO_HOST,
1986 				      (1<<4), 0,
1987 				      "REQUEST SENSE");
1988 		if (reply == 0)
1989 			reply = do_request_sense(common, bh);
1990 		break;
1991 
1992 	case START_STOP:
1993 		common->data_size_from_cmnd = 0;
1994 		reply = check_command(common, 6, DATA_DIR_NONE,
1995 				      (1<<1) | (1<<4), 0,
1996 				      "START-STOP UNIT");
1997 		if (reply == 0)
1998 			reply = do_start_stop(common);
1999 		break;
2000 
2001 	case SYNCHRONIZE_CACHE:
2002 		common->data_size_from_cmnd = 0;
2003 		reply = check_command(common, 10, DATA_DIR_NONE,
2004 				      (0xf<<2) | (3<<7), 1,
2005 				      "SYNCHRONIZE CACHE");
2006 		if (reply == 0)
2007 			reply = do_synchronize_cache(common);
2008 		break;
2009 
2010 	case TEST_UNIT_READY:
2011 		common->data_size_from_cmnd = 0;
2012 		reply = check_command(common, 6, DATA_DIR_NONE,
2013 				0, 1,
2014 				"TEST UNIT READY");
2015 		break;
2016 
2017 	/*
2018 	 * Although optional, this command is used by MS-Windows.  We
2019 	 * support a minimal version: BytChk must be 0.
2020 	 */
2021 	case VERIFY:
2022 		common->data_size_from_cmnd = 0;
2023 		reply = check_command(common, 10, DATA_DIR_NONE,
2024 				      (1<<1) | (0xf<<2) | (3<<7), 1,
2025 				      "VERIFY");
2026 		if (reply == 0)
2027 			reply = do_verify(common);
2028 		break;
2029 
2030 	case WRITE_6:
2031 		i = common->cmnd[4];
2032 		common->data_size_from_cmnd = (i == 0) ? 256 : i;
2033 		reply = check_command_size_in_blocks(common, 6,
2034 				      DATA_DIR_FROM_HOST,
2035 				      (7<<1) | (1<<4), 1,
2036 				      "WRITE(6)");
2037 		if (reply == 0)
2038 			reply = do_write(common);
2039 		break;
2040 
2041 	case WRITE_10:
2042 		common->data_size_from_cmnd =
2043 				get_unaligned_be16(&common->cmnd[7]);
2044 		reply = check_command_size_in_blocks(common, 10,
2045 				      DATA_DIR_FROM_HOST,
2046 				      (1<<1) | (0xf<<2) | (3<<7), 1,
2047 				      "WRITE(10)");
2048 		if (reply == 0)
2049 			reply = do_write(common);
2050 		break;
2051 
2052 	case WRITE_12:
2053 		common->data_size_from_cmnd =
2054 				get_unaligned_be32(&common->cmnd[6]);
2055 		reply = check_command_size_in_blocks(common, 12,
2056 				      DATA_DIR_FROM_HOST,
2057 				      (1<<1) | (0xf<<2) | (0xf<<6), 1,
2058 				      "WRITE(12)");
2059 		if (reply == 0)
2060 			reply = do_write(common);
2061 		break;
2062 
2063 	/*
2064 	 * Some mandatory commands that we recognize but don't implement.
2065 	 * They don't mean much in this setting.  It's left as an exercise
2066 	 * for anyone interested to implement RESERVE and RELEASE in terms
2067 	 * of Posix locks.
2068 	 */
2069 	case FORMAT_UNIT:
2070 	case RELEASE:
2071 	case RESERVE:
2072 	case SEND_DIAGNOSTIC:
2073 		/* Fall through */
2074 
2075 	default:
2076 unknown_cmnd:
2077 		common->data_size_from_cmnd = 0;
2078 		sprintf(unknown, "Unknown x%02x", common->cmnd[0]);
2079 		reply = check_command(common, common->cmnd_size,
2080 				      DATA_DIR_UNKNOWN, ~0, 0, unknown);
2081 		if (reply == 0) {
2082 			common->curlun->sense_data = SS_INVALID_COMMAND;
2083 			reply = -EINVAL;
2084 		}
2085 		break;
2086 	}
2087 	up_read(&common->filesem);
2088 
2089 	if (reply == -EINTR || signal_pending(current))
2090 		return -EINTR;
2091 
2092 	/* Set up the single reply buffer for finish_reply() */
2093 	if (reply == -EINVAL)
2094 		reply = 0;		/* Error reply length */
2095 	if (reply >= 0 && common->data_dir == DATA_DIR_TO_HOST) {
2096 		reply = min((u32)reply, common->data_size_from_cmnd);
2097 		bh->inreq->length = reply;
2098 		bh->state = BUF_STATE_FULL;
2099 		common->residue -= reply;
2100 	}				/* Otherwise it's already set */
2101 
2102 	return 0;
2103 }
2104 
2105 
2106 /*-------------------------------------------------------------------------*/
2107 
2108 static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
2109 {
2110 	struct usb_request	*req = bh->outreq;
2111 	struct bulk_cb_wrap	*cbw = req->buf;
2112 	struct fsg_common	*common = fsg->common;
2113 
2114 	/* Was this a real packet?  Should it be ignored? */
2115 	if (req->status || test_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags))
2116 		return -EINVAL;
2117 
2118 	/* Is the CBW valid? */
2119 	if (req->actual != US_BULK_CB_WRAP_LEN ||
2120 			cbw->Signature != cpu_to_le32(
2121 				US_BULK_CB_SIGN)) {
2122 		DBG(fsg, "invalid CBW: len %u sig 0x%x\n",
2123 				req->actual,
2124 				le32_to_cpu(cbw->Signature));
2125 
2126 		/*
2127 		 * The Bulk-only spec says we MUST stall the IN endpoint
2128 		 * (6.6.1), so it's unavoidable.  It also says we must
2129 		 * retain this state until the next reset, but there's
2130 		 * no way to tell the controller driver it should ignore
2131 		 * Clear-Feature(HALT) requests.
2132 		 *
2133 		 * We aren't required to halt the OUT endpoint; instead
2134 		 * we can simply accept and discard any data received
2135 		 * until the next reset.
2136 		 */
2137 		wedge_bulk_in_endpoint(fsg);
2138 		set_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
2139 		return -EINVAL;
2140 	}
2141 
2142 	/* Is the CBW meaningful? */
2143 	if (cbw->Lun >= ARRAY_SIZE(common->luns) ||
2144 	    cbw->Flags & ~US_BULK_FLAG_IN || cbw->Length <= 0 ||
2145 	    cbw->Length > MAX_COMMAND_SIZE) {
2146 		DBG(fsg, "non-meaningful CBW: lun = %u, flags = 0x%x, "
2147 				"cmdlen %u\n",
2148 				cbw->Lun, cbw->Flags, cbw->Length);
2149 
2150 		/*
2151 		 * We can do anything we want here, so let's stall the
2152 		 * bulk pipes if we are allowed to.
2153 		 */
2154 		if (common->can_stall) {
2155 			fsg_set_halt(fsg, fsg->bulk_out);
2156 			halt_bulk_in_endpoint(fsg);
2157 		}
2158 		return -EINVAL;
2159 	}
2160 
2161 	/* Save the command for later */
2162 	common->cmnd_size = cbw->Length;
2163 	memcpy(common->cmnd, cbw->CDB, common->cmnd_size);
2164 	if (cbw->Flags & US_BULK_FLAG_IN)
2165 		common->data_dir = DATA_DIR_TO_HOST;
2166 	else
2167 		common->data_dir = DATA_DIR_FROM_HOST;
2168 	common->data_size = le32_to_cpu(cbw->DataTransferLength);
2169 	if (common->data_size == 0)
2170 		common->data_dir = DATA_DIR_NONE;
2171 	common->lun = cbw->Lun;
2172 	if (common->lun < ARRAY_SIZE(common->luns))
2173 		common->curlun = common->luns[common->lun];
2174 	else
2175 		common->curlun = NULL;
2176 	common->tag = cbw->Tag;
2177 	return 0;
2178 }
2179 
2180 static int get_next_command(struct fsg_common *common)
2181 {
2182 	struct fsg_buffhd	*bh;
2183 	int			rc = 0;
2184 
2185 	/* Wait for the next buffer to become available */
2186 	bh = common->next_buffhd_to_fill;
2187 	while (bh->state != BUF_STATE_EMPTY) {
2188 		rc = sleep_thread(common, true);
2189 		if (rc)
2190 			return rc;
2191 	}
2192 
2193 	/* Queue a request to read a Bulk-only CBW */
2194 	set_bulk_out_req_length(common, bh, US_BULK_CB_WRAP_LEN);
2195 	if (!start_out_transfer(common, bh))
2196 		/* Don't know what to do if common->fsg is NULL */
2197 		return -EIO;
2198 
2199 	/*
2200 	 * We will drain the buffer in software, which means we
2201 	 * can reuse it for the next filling.  No need to advance
2202 	 * next_buffhd_to_fill.
2203 	 */
2204 
2205 	/* Wait for the CBW to arrive */
2206 	while (bh->state != BUF_STATE_FULL) {
2207 		rc = sleep_thread(common, true);
2208 		if (rc)
2209 			return rc;
2210 	}
2211 	smp_rmb();
2212 	rc = fsg_is_set(common) ? received_cbw(common->fsg, bh) : -EIO;
2213 	bh->state = BUF_STATE_EMPTY;
2214 
2215 	return rc;
2216 }
2217 
2218 
2219 /*-------------------------------------------------------------------------*/
2220 
2221 static int alloc_request(struct fsg_common *common, struct usb_ep *ep,
2222 		struct usb_request **preq)
2223 {
2224 	*preq = usb_ep_alloc_request(ep, GFP_ATOMIC);
2225 	if (*preq)
2226 		return 0;
2227 	ERROR(common, "can't allocate request for %s\n", ep->name);
2228 	return -ENOMEM;
2229 }
2230 
2231 /* Reset interface setting and re-init endpoint state (toggle etc). */
2232 static int do_set_interface(struct fsg_common *common, struct fsg_dev *new_fsg)
2233 {
2234 	struct fsg_dev *fsg;
2235 	int i, rc = 0;
2236 
2237 	if (common->running)
2238 		DBG(common, "reset interface\n");
2239 
2240 reset:
2241 	/* Deallocate the requests */
2242 	if (common->fsg) {
2243 		fsg = common->fsg;
2244 
2245 		for (i = 0; i < common->fsg_num_buffers; ++i) {
2246 			struct fsg_buffhd *bh = &common->buffhds[i];
2247 
2248 			if (bh->inreq) {
2249 				usb_ep_free_request(fsg->bulk_in, bh->inreq);
2250 				bh->inreq = NULL;
2251 			}
2252 			if (bh->outreq) {
2253 				usb_ep_free_request(fsg->bulk_out, bh->outreq);
2254 				bh->outreq = NULL;
2255 			}
2256 		}
2257 
2258 		/* Disable the endpoints */
2259 		if (fsg->bulk_in_enabled) {
2260 			usb_ep_disable(fsg->bulk_in);
2261 			fsg->bulk_in_enabled = 0;
2262 		}
2263 		if (fsg->bulk_out_enabled) {
2264 			usb_ep_disable(fsg->bulk_out);
2265 			fsg->bulk_out_enabled = 0;
2266 		}
2267 
2268 		common->fsg = NULL;
2269 		wake_up(&common->fsg_wait);
2270 	}
2271 
2272 	common->running = 0;
2273 	if (!new_fsg || rc)
2274 		return rc;
2275 
2276 	common->fsg = new_fsg;
2277 	fsg = common->fsg;
2278 
2279 	/* Enable the endpoints */
2280 	rc = config_ep_by_speed(common->gadget, &(fsg->function), fsg->bulk_in);
2281 	if (rc)
2282 		goto reset;
2283 	rc = usb_ep_enable(fsg->bulk_in);
2284 	if (rc)
2285 		goto reset;
2286 	fsg->bulk_in->driver_data = common;
2287 	fsg->bulk_in_enabled = 1;
2288 
2289 	rc = config_ep_by_speed(common->gadget, &(fsg->function),
2290 				fsg->bulk_out);
2291 	if (rc)
2292 		goto reset;
2293 	rc = usb_ep_enable(fsg->bulk_out);
2294 	if (rc)
2295 		goto reset;
2296 	fsg->bulk_out->driver_data = common;
2297 	fsg->bulk_out_enabled = 1;
2298 	common->bulk_out_maxpacket = usb_endpoint_maxp(fsg->bulk_out->desc);
2299 	clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
2300 
2301 	/* Allocate the requests */
2302 	for (i = 0; i < common->fsg_num_buffers; ++i) {
2303 		struct fsg_buffhd	*bh = &common->buffhds[i];
2304 
2305 		rc = alloc_request(common, fsg->bulk_in, &bh->inreq);
2306 		if (rc)
2307 			goto reset;
2308 		rc = alloc_request(common, fsg->bulk_out, &bh->outreq);
2309 		if (rc)
2310 			goto reset;
2311 		bh->inreq->buf = bh->outreq->buf = bh->buf;
2312 		bh->inreq->context = bh->outreq->context = bh;
2313 		bh->inreq->complete = bulk_in_complete;
2314 		bh->outreq->complete = bulk_out_complete;
2315 	}
2316 
2317 	common->running = 1;
2318 	for (i = 0; i < ARRAY_SIZE(common->luns); ++i)
2319 		if (common->luns[i])
2320 			common->luns[i]->unit_attention_data =
2321 				SS_RESET_OCCURRED;
2322 	return rc;
2323 }
2324 
2325 
2326 /****************************** ALT CONFIGS ******************************/
2327 
2328 static int fsg_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
2329 {
2330 	struct fsg_dev *fsg = fsg_from_func(f);
2331 	fsg->common->new_fsg = fsg;
2332 	raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
2333 	return USB_GADGET_DELAYED_STATUS;
2334 }
2335 
2336 static void fsg_disable(struct usb_function *f)
2337 {
2338 	struct fsg_dev *fsg = fsg_from_func(f);
2339 	fsg->common->new_fsg = NULL;
2340 	raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
2341 }
2342 
2343 
2344 /*-------------------------------------------------------------------------*/
2345 
2346 static void handle_exception(struct fsg_common *common)
2347 {
2348 	int			i;
2349 	struct fsg_buffhd	*bh;
2350 	enum fsg_state		old_state;
2351 	struct fsg_lun		*curlun;
2352 	unsigned int		exception_req_tag;
2353 
2354 	/*
2355 	 * Clear the existing signals.  Anything but SIGUSR1 is converted
2356 	 * into a high-priority EXIT exception.
2357 	 */
2358 	for (;;) {
2359 		int sig = kernel_dequeue_signal(NULL);
2360 		if (!sig)
2361 			break;
2362 		if (sig != SIGUSR1) {
2363 			if (common->state < FSG_STATE_EXIT)
2364 				DBG(common, "Main thread exiting on signal\n");
2365 			raise_exception(common, FSG_STATE_EXIT);
2366 		}
2367 	}
2368 
2369 	/* Cancel all the pending transfers */
2370 	if (likely(common->fsg)) {
2371 		for (i = 0; i < common->fsg_num_buffers; ++i) {
2372 			bh = &common->buffhds[i];
2373 			if (bh->inreq_busy)
2374 				usb_ep_dequeue(common->fsg->bulk_in, bh->inreq);
2375 			if (bh->outreq_busy)
2376 				usb_ep_dequeue(common->fsg->bulk_out,
2377 					       bh->outreq);
2378 		}
2379 
2380 		/* Wait until everything is idle */
2381 		for (;;) {
2382 			int num_active = 0;
2383 			for (i = 0; i < common->fsg_num_buffers; ++i) {
2384 				bh = &common->buffhds[i];
2385 				num_active += bh->inreq_busy + bh->outreq_busy;
2386 			}
2387 			if (num_active == 0)
2388 				break;
2389 			if (sleep_thread(common, true))
2390 				return;
2391 		}
2392 
2393 		/* Clear out the controller's fifos */
2394 		if (common->fsg->bulk_in_enabled)
2395 			usb_ep_fifo_flush(common->fsg->bulk_in);
2396 		if (common->fsg->bulk_out_enabled)
2397 			usb_ep_fifo_flush(common->fsg->bulk_out);
2398 	}
2399 
2400 	/*
2401 	 * Reset the I/O buffer states and pointers, the SCSI
2402 	 * state, and the exception.  Then invoke the handler.
2403 	 */
2404 	spin_lock_irq(&common->lock);
2405 
2406 	for (i = 0; i < common->fsg_num_buffers; ++i) {
2407 		bh = &common->buffhds[i];
2408 		bh->state = BUF_STATE_EMPTY;
2409 	}
2410 	common->next_buffhd_to_fill = &common->buffhds[0];
2411 	common->next_buffhd_to_drain = &common->buffhds[0];
2412 	exception_req_tag = common->exception_req_tag;
2413 	old_state = common->state;
2414 
2415 	if (old_state == FSG_STATE_ABORT_BULK_OUT)
2416 		common->state = FSG_STATE_STATUS_PHASE;
2417 	else {
2418 		for (i = 0; i < ARRAY_SIZE(common->luns); ++i) {
2419 			curlun = common->luns[i];
2420 			if (!curlun)
2421 				continue;
2422 			curlun->prevent_medium_removal = 0;
2423 			curlun->sense_data = SS_NO_SENSE;
2424 			curlun->unit_attention_data = SS_NO_SENSE;
2425 			curlun->sense_data_info = 0;
2426 			curlun->info_valid = 0;
2427 		}
2428 		common->state = FSG_STATE_IDLE;
2429 	}
2430 	spin_unlock_irq(&common->lock);
2431 
2432 	/* Carry out any extra actions required for the exception */
2433 	switch (old_state) {
2434 	case FSG_STATE_ABORT_BULK_OUT:
2435 		send_status(common);
2436 		spin_lock_irq(&common->lock);
2437 		if (common->state == FSG_STATE_STATUS_PHASE)
2438 			common->state = FSG_STATE_IDLE;
2439 		spin_unlock_irq(&common->lock);
2440 		break;
2441 
2442 	case FSG_STATE_RESET:
2443 		/*
2444 		 * In case we were forced against our will to halt a
2445 		 * bulk endpoint, clear the halt now.  (The SuperH UDC
2446 		 * requires this.)
2447 		 */
2448 		if (!fsg_is_set(common))
2449 			break;
2450 		if (test_and_clear_bit(IGNORE_BULK_OUT,
2451 				       &common->fsg->atomic_bitflags))
2452 			usb_ep_clear_halt(common->fsg->bulk_in);
2453 
2454 		if (common->ep0_req_tag == exception_req_tag)
2455 			ep0_queue(common);	/* Complete the status stage */
2456 
2457 		/*
2458 		 * Technically this should go here, but it would only be
2459 		 * a waste of time.  Ditto for the INTERFACE_CHANGE and
2460 		 * CONFIG_CHANGE cases.
2461 		 */
2462 		/* for (i = 0; i < common->ARRAY_SIZE(common->luns); ++i) */
2463 		/*	if (common->luns[i]) */
2464 		/*		common->luns[i]->unit_attention_data = */
2465 		/*			SS_RESET_OCCURRED;  */
2466 		break;
2467 
2468 	case FSG_STATE_CONFIG_CHANGE:
2469 		do_set_interface(common, common->new_fsg);
2470 		if (common->new_fsg)
2471 			usb_composite_setup_continue(common->cdev);
2472 		break;
2473 
2474 	case FSG_STATE_EXIT:
2475 	case FSG_STATE_TERMINATED:
2476 		do_set_interface(common, NULL);		/* Free resources */
2477 		spin_lock_irq(&common->lock);
2478 		common->state = FSG_STATE_TERMINATED;	/* Stop the thread */
2479 		spin_unlock_irq(&common->lock);
2480 		break;
2481 
2482 	case FSG_STATE_INTERFACE_CHANGE:
2483 	case FSG_STATE_DISCONNECT:
2484 	case FSG_STATE_COMMAND_PHASE:
2485 	case FSG_STATE_DATA_PHASE:
2486 	case FSG_STATE_STATUS_PHASE:
2487 	case FSG_STATE_IDLE:
2488 		break;
2489 	}
2490 }
2491 
2492 
2493 /*-------------------------------------------------------------------------*/
2494 
2495 static int fsg_main_thread(void *common_)
2496 {
2497 	struct fsg_common	*common = common_;
2498 
2499 	/*
2500 	 * Allow the thread to be killed by a signal, but set the signal mask
2501 	 * to block everything but INT, TERM, KILL, and USR1.
2502 	 */
2503 	allow_signal(SIGINT);
2504 	allow_signal(SIGTERM);
2505 	allow_signal(SIGKILL);
2506 	allow_signal(SIGUSR1);
2507 
2508 	/* Allow the thread to be frozen */
2509 	set_freezable();
2510 
2511 	/*
2512 	 * Arrange for userspace references to be interpreted as kernel
2513 	 * pointers.  That way we can pass a kernel pointer to a routine
2514 	 * that expects a __user pointer and it will work okay.
2515 	 */
2516 	set_fs(get_ds());
2517 
2518 	/* The main loop */
2519 	while (common->state != FSG_STATE_TERMINATED) {
2520 		if (exception_in_progress(common) || signal_pending(current)) {
2521 			handle_exception(common);
2522 			continue;
2523 		}
2524 
2525 		if (!common->running) {
2526 			sleep_thread(common, true);
2527 			continue;
2528 		}
2529 
2530 		if (get_next_command(common))
2531 			continue;
2532 
2533 		spin_lock_irq(&common->lock);
2534 		if (!exception_in_progress(common))
2535 			common->state = FSG_STATE_DATA_PHASE;
2536 		spin_unlock_irq(&common->lock);
2537 
2538 		if (do_scsi_command(common) || finish_reply(common))
2539 			continue;
2540 
2541 		spin_lock_irq(&common->lock);
2542 		if (!exception_in_progress(common))
2543 			common->state = FSG_STATE_STATUS_PHASE;
2544 		spin_unlock_irq(&common->lock);
2545 
2546 		if (send_status(common))
2547 			continue;
2548 
2549 		spin_lock_irq(&common->lock);
2550 		if (!exception_in_progress(common))
2551 			common->state = FSG_STATE_IDLE;
2552 		spin_unlock_irq(&common->lock);
2553 	}
2554 
2555 	spin_lock_irq(&common->lock);
2556 	common->thread_task = NULL;
2557 	spin_unlock_irq(&common->lock);
2558 
2559 	if (!common->ops || !common->ops->thread_exits
2560 	 || common->ops->thread_exits(common) < 0) {
2561 		int i;
2562 
2563 		down_write(&common->filesem);
2564 		for (i = 0; i < ARRAY_SIZE(common->luns); --i) {
2565 			struct fsg_lun *curlun = common->luns[i];
2566 			if (!curlun || !fsg_lun_is_open(curlun))
2567 				continue;
2568 
2569 			fsg_lun_close(curlun);
2570 			curlun->unit_attention_data = SS_MEDIUM_NOT_PRESENT;
2571 		}
2572 		up_write(&common->filesem);
2573 	}
2574 
2575 	/* Let fsg_unbind() know the thread has exited */
2576 	complete_and_exit(&common->thread_notifier, 0);
2577 }
2578 
2579 
2580 /*************************** DEVICE ATTRIBUTES ***************************/
2581 
2582 static ssize_t ro_show(struct device *dev, struct device_attribute *attr, char *buf)
2583 {
2584 	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
2585 
2586 	return fsg_show_ro(curlun, buf);
2587 }
2588 
2589 static ssize_t nofua_show(struct device *dev, struct device_attribute *attr,
2590 			  char *buf)
2591 {
2592 	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
2593 
2594 	return fsg_show_nofua(curlun, buf);
2595 }
2596 
2597 static ssize_t file_show(struct device *dev, struct device_attribute *attr,
2598 			 char *buf)
2599 {
2600 	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
2601 	struct rw_semaphore	*filesem = dev_get_drvdata(dev);
2602 
2603 	return fsg_show_file(curlun, filesem, buf);
2604 }
2605 
2606 static ssize_t ro_store(struct device *dev, struct device_attribute *attr,
2607 			const char *buf, size_t count)
2608 {
2609 	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
2610 	struct rw_semaphore	*filesem = dev_get_drvdata(dev);
2611 
2612 	return fsg_store_ro(curlun, filesem, buf, count);
2613 }
2614 
2615 static ssize_t nofua_store(struct device *dev, struct device_attribute *attr,
2616 			   const char *buf, size_t count)
2617 {
2618 	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
2619 
2620 	return fsg_store_nofua(curlun, buf, count);
2621 }
2622 
2623 static ssize_t file_store(struct device *dev, struct device_attribute *attr,
2624 			  const char *buf, size_t count)
2625 {
2626 	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
2627 	struct rw_semaphore	*filesem = dev_get_drvdata(dev);
2628 
2629 	return fsg_store_file(curlun, filesem, buf, count);
2630 }
2631 
2632 static DEVICE_ATTR_RW(nofua);
2633 /* mode wil be set in fsg_lun_attr_is_visible() */
2634 static DEVICE_ATTR(ro, 0, ro_show, ro_store);
2635 static DEVICE_ATTR(file, 0, file_show, file_store);
2636 
2637 /****************************** FSG COMMON ******************************/
2638 
2639 static void fsg_common_release(struct kref *ref);
2640 
2641 static void fsg_lun_release(struct device *dev)
2642 {
2643 	/* Nothing needs to be done */
2644 }
2645 
2646 void fsg_common_get(struct fsg_common *common)
2647 {
2648 	kref_get(&common->ref);
2649 }
2650 EXPORT_SYMBOL_GPL(fsg_common_get);
2651 
2652 void fsg_common_put(struct fsg_common *common)
2653 {
2654 	kref_put(&common->ref, fsg_common_release);
2655 }
2656 EXPORT_SYMBOL_GPL(fsg_common_put);
2657 
2658 /* check if fsg_num_buffers is within a valid range */
2659 static inline int fsg_num_buffers_validate(unsigned int fsg_num_buffers)
2660 {
2661 #define FSG_MAX_NUM_BUFFERS	32
2662 
2663 	if (fsg_num_buffers >= 2 && fsg_num_buffers <= FSG_MAX_NUM_BUFFERS)
2664 		return 0;
2665 	pr_err("fsg_num_buffers %u is out of range (%d to %d)\n",
2666 	       fsg_num_buffers, 2, FSG_MAX_NUM_BUFFERS);
2667 	return -EINVAL;
2668 }
2669 
2670 static struct fsg_common *fsg_common_setup(struct fsg_common *common)
2671 {
2672 	if (!common) {
2673 		common = kzalloc(sizeof(*common), GFP_KERNEL);
2674 		if (!common)
2675 			return ERR_PTR(-ENOMEM);
2676 		common->free_storage_on_release = 1;
2677 	} else {
2678 		common->free_storage_on_release = 0;
2679 	}
2680 	init_rwsem(&common->filesem);
2681 	spin_lock_init(&common->lock);
2682 	kref_init(&common->ref);
2683 	init_completion(&common->thread_notifier);
2684 	init_waitqueue_head(&common->fsg_wait);
2685 	common->state = FSG_STATE_TERMINATED;
2686 	memset(common->luns, 0, sizeof(common->luns));
2687 
2688 	return common;
2689 }
2690 
2691 void fsg_common_set_sysfs(struct fsg_common *common, bool sysfs)
2692 {
2693 	common->sysfs = sysfs;
2694 }
2695 EXPORT_SYMBOL_GPL(fsg_common_set_sysfs);
2696 
2697 static void _fsg_common_free_buffers(struct fsg_buffhd *buffhds, unsigned n)
2698 {
2699 	if (buffhds) {
2700 		struct fsg_buffhd *bh = buffhds;
2701 		while (n--) {
2702 			kfree(bh->buf);
2703 			++bh;
2704 		}
2705 		kfree(buffhds);
2706 	}
2707 }
2708 
2709 int fsg_common_set_num_buffers(struct fsg_common *common, unsigned int n)
2710 {
2711 	struct fsg_buffhd *bh, *buffhds;
2712 	int i, rc;
2713 
2714 	rc = fsg_num_buffers_validate(n);
2715 	if (rc != 0)
2716 		return rc;
2717 
2718 	buffhds = kcalloc(n, sizeof(*buffhds), GFP_KERNEL);
2719 	if (!buffhds)
2720 		return -ENOMEM;
2721 
2722 	/* Data buffers cyclic list */
2723 	bh = buffhds;
2724 	i = n;
2725 	goto buffhds_first_it;
2726 	do {
2727 		bh->next = bh + 1;
2728 		++bh;
2729 buffhds_first_it:
2730 		bh->buf = kmalloc(FSG_BUFLEN, GFP_KERNEL);
2731 		if (unlikely(!bh->buf))
2732 			goto error_release;
2733 	} while (--i);
2734 	bh->next = buffhds;
2735 
2736 	_fsg_common_free_buffers(common->buffhds, common->fsg_num_buffers);
2737 	common->fsg_num_buffers = n;
2738 	common->buffhds = buffhds;
2739 
2740 	return 0;
2741 
2742 error_release:
2743 	/*
2744 	 * "buf"s pointed to by heads after n - i are NULL
2745 	 * so releasing them won't hurt
2746 	 */
2747 	_fsg_common_free_buffers(buffhds, n);
2748 
2749 	return -ENOMEM;
2750 }
2751 EXPORT_SYMBOL_GPL(fsg_common_set_num_buffers);
2752 
2753 void fsg_common_remove_lun(struct fsg_lun *lun)
2754 {
2755 	if (device_is_registered(&lun->dev))
2756 		device_unregister(&lun->dev);
2757 	fsg_lun_close(lun);
2758 	kfree(lun);
2759 }
2760 EXPORT_SYMBOL_GPL(fsg_common_remove_lun);
2761 
2762 static void _fsg_common_remove_luns(struct fsg_common *common, int n)
2763 {
2764 	int i;
2765 
2766 	for (i = 0; i < n; ++i)
2767 		if (common->luns[i]) {
2768 			fsg_common_remove_lun(common->luns[i]);
2769 			common->luns[i] = NULL;
2770 		}
2771 }
2772 
2773 void fsg_common_remove_luns(struct fsg_common *common)
2774 {
2775 	_fsg_common_remove_luns(common, ARRAY_SIZE(common->luns));
2776 }
2777 EXPORT_SYMBOL_GPL(fsg_common_remove_luns);
2778 
2779 void fsg_common_set_ops(struct fsg_common *common,
2780 			const struct fsg_operations *ops)
2781 {
2782 	common->ops = ops;
2783 }
2784 EXPORT_SYMBOL_GPL(fsg_common_set_ops);
2785 
2786 void fsg_common_free_buffers(struct fsg_common *common)
2787 {
2788 	_fsg_common_free_buffers(common->buffhds, common->fsg_num_buffers);
2789 	common->buffhds = NULL;
2790 }
2791 EXPORT_SYMBOL_GPL(fsg_common_free_buffers);
2792 
2793 int fsg_common_set_cdev(struct fsg_common *common,
2794 			 struct usb_composite_dev *cdev, bool can_stall)
2795 {
2796 	struct usb_string *us;
2797 
2798 	common->gadget = cdev->gadget;
2799 	common->ep0 = cdev->gadget->ep0;
2800 	common->ep0req = cdev->req;
2801 	common->cdev = cdev;
2802 
2803 	us = usb_gstrings_attach(cdev, fsg_strings_array,
2804 				 ARRAY_SIZE(fsg_strings));
2805 	if (IS_ERR(us))
2806 		return PTR_ERR(us);
2807 
2808 	fsg_intf_desc.iInterface = us[FSG_STRING_INTERFACE].id;
2809 
2810 	/*
2811 	 * Some peripheral controllers are known not to be able to
2812 	 * halt bulk endpoints correctly.  If one of them is present,
2813 	 * disable stalls.
2814 	 */
2815 	common->can_stall = can_stall &&
2816 			gadget_is_stall_supported(common->gadget);
2817 
2818 	return 0;
2819 }
2820 EXPORT_SYMBOL_GPL(fsg_common_set_cdev);
2821 
2822 static struct attribute *fsg_lun_dev_attrs[] = {
2823 	&dev_attr_ro.attr,
2824 	&dev_attr_file.attr,
2825 	&dev_attr_nofua.attr,
2826 	NULL
2827 };
2828 
2829 static umode_t fsg_lun_dev_is_visible(struct kobject *kobj,
2830 				      struct attribute *attr, int idx)
2831 {
2832 	struct device *dev = kobj_to_dev(kobj);
2833 	struct fsg_lun *lun = fsg_lun_from_dev(dev);
2834 
2835 	if (attr == &dev_attr_ro.attr)
2836 		return lun->cdrom ? S_IRUGO : (S_IWUSR | S_IRUGO);
2837 	if (attr == &dev_attr_file.attr)
2838 		return lun->removable ? (S_IWUSR | S_IRUGO) : S_IRUGO;
2839 	return attr->mode;
2840 }
2841 
2842 static const struct attribute_group fsg_lun_dev_group = {
2843 	.attrs = fsg_lun_dev_attrs,
2844 	.is_visible = fsg_lun_dev_is_visible,
2845 };
2846 
2847 static const struct attribute_group *fsg_lun_dev_groups[] = {
2848 	&fsg_lun_dev_group,
2849 	NULL
2850 };
2851 
2852 int fsg_common_create_lun(struct fsg_common *common, struct fsg_lun_config *cfg,
2853 			  unsigned int id, const char *name,
2854 			  const char **name_pfx)
2855 {
2856 	struct fsg_lun *lun;
2857 	char *pathbuf, *p;
2858 	int rc = -ENOMEM;
2859 
2860 	if (id >= ARRAY_SIZE(common->luns))
2861 		return -ENODEV;
2862 
2863 	if (common->luns[id])
2864 		return -EBUSY;
2865 
2866 	if (!cfg->filename && !cfg->removable) {
2867 		pr_err("no file given for LUN%d\n", id);
2868 		return -EINVAL;
2869 	}
2870 
2871 	lun = kzalloc(sizeof(*lun), GFP_KERNEL);
2872 	if (!lun)
2873 		return -ENOMEM;
2874 
2875 	lun->name_pfx = name_pfx;
2876 
2877 	lun->cdrom = !!cfg->cdrom;
2878 	lun->ro = cfg->cdrom || cfg->ro;
2879 	lun->initially_ro = lun->ro;
2880 	lun->removable = !!cfg->removable;
2881 
2882 	if (!common->sysfs) {
2883 		/* we DON'T own the name!*/
2884 		lun->name = name;
2885 	} else {
2886 		lun->dev.release = fsg_lun_release;
2887 		lun->dev.parent = &common->gadget->dev;
2888 		lun->dev.groups = fsg_lun_dev_groups;
2889 		dev_set_drvdata(&lun->dev, &common->filesem);
2890 		dev_set_name(&lun->dev, "%s", name);
2891 		lun->name = dev_name(&lun->dev);
2892 
2893 		rc = device_register(&lun->dev);
2894 		if (rc) {
2895 			pr_info("failed to register LUN%d: %d\n", id, rc);
2896 			put_device(&lun->dev);
2897 			goto error_sysfs;
2898 		}
2899 	}
2900 
2901 	common->luns[id] = lun;
2902 
2903 	if (cfg->filename) {
2904 		rc = fsg_lun_open(lun, cfg->filename);
2905 		if (rc)
2906 			goto error_lun;
2907 	}
2908 
2909 	pathbuf = kmalloc(PATH_MAX, GFP_KERNEL);
2910 	p = "(no medium)";
2911 	if (fsg_lun_is_open(lun)) {
2912 		p = "(error)";
2913 		if (pathbuf) {
2914 			p = file_path(lun->filp, pathbuf, PATH_MAX);
2915 			if (IS_ERR(p))
2916 				p = "(error)";
2917 		}
2918 	}
2919 	pr_info("LUN: %s%s%sfile: %s\n",
2920 	      lun->removable ? "removable " : "",
2921 	      lun->ro ? "read only " : "",
2922 	      lun->cdrom ? "CD-ROM " : "",
2923 	      p);
2924 	kfree(pathbuf);
2925 
2926 	return 0;
2927 
2928 error_lun:
2929 	if (device_is_registered(&lun->dev))
2930 		device_unregister(&lun->dev);
2931 	fsg_lun_close(lun);
2932 	common->luns[id] = NULL;
2933 error_sysfs:
2934 	kfree(lun);
2935 	return rc;
2936 }
2937 EXPORT_SYMBOL_GPL(fsg_common_create_lun);
2938 
2939 int fsg_common_create_luns(struct fsg_common *common, struct fsg_config *cfg)
2940 {
2941 	char buf[8]; /* enough for 100000000 different numbers, decimal */
2942 	int i, rc;
2943 
2944 	fsg_common_remove_luns(common);
2945 
2946 	for (i = 0; i < cfg->nluns; ++i) {
2947 		snprintf(buf, sizeof(buf), "lun%d", i);
2948 		rc = fsg_common_create_lun(common, &cfg->luns[i], i, buf, NULL);
2949 		if (rc)
2950 			goto fail;
2951 	}
2952 
2953 	pr_info("Number of LUNs=%d\n", cfg->nluns);
2954 
2955 	return 0;
2956 
2957 fail:
2958 	_fsg_common_remove_luns(common, i);
2959 	return rc;
2960 }
2961 EXPORT_SYMBOL_GPL(fsg_common_create_luns);
2962 
2963 void fsg_common_set_inquiry_string(struct fsg_common *common, const char *vn,
2964 				   const char *pn)
2965 {
2966 	int i;
2967 
2968 	/* Prepare inquiryString */
2969 	i = get_default_bcdDevice();
2970 	snprintf(common->inquiry_string, sizeof(common->inquiry_string),
2971 		 "%-8s%-16s%04x", vn ?: "Linux",
2972 		 /* Assume product name dependent on the first LUN */
2973 		 pn ?: ((*common->luns)->cdrom
2974 		     ? "File-CD Gadget"
2975 		     : "File-Stor Gadget"),
2976 		 i);
2977 }
2978 EXPORT_SYMBOL_GPL(fsg_common_set_inquiry_string);
2979 
2980 int fsg_common_run_thread(struct fsg_common *common)
2981 {
2982 	common->state = FSG_STATE_IDLE;
2983 	/* Tell the thread to start working */
2984 	common->thread_task =
2985 		kthread_create(fsg_main_thread, common, "file-storage");
2986 	if (IS_ERR(common->thread_task)) {
2987 		common->state = FSG_STATE_TERMINATED;
2988 		return PTR_ERR(common->thread_task);
2989 	}
2990 
2991 	DBG(common, "I/O thread pid: %d\n", task_pid_nr(common->thread_task));
2992 
2993 	wake_up_process(common->thread_task);
2994 
2995 	return 0;
2996 }
2997 EXPORT_SYMBOL_GPL(fsg_common_run_thread);
2998 
2999 static void fsg_common_release(struct kref *ref)
3000 {
3001 	struct fsg_common *common = container_of(ref, struct fsg_common, ref);
3002 	int i;
3003 
3004 	/* If the thread isn't already dead, tell it to exit now */
3005 	if (common->state != FSG_STATE_TERMINATED) {
3006 		raise_exception(common, FSG_STATE_EXIT);
3007 		wait_for_completion(&common->thread_notifier);
3008 	}
3009 
3010 	for (i = 0; i < ARRAY_SIZE(common->luns); ++i) {
3011 		struct fsg_lun *lun = common->luns[i];
3012 		if (!lun)
3013 			continue;
3014 		fsg_lun_close(lun);
3015 		if (device_is_registered(&lun->dev))
3016 			device_unregister(&lun->dev);
3017 		kfree(lun);
3018 	}
3019 
3020 	_fsg_common_free_buffers(common->buffhds, common->fsg_num_buffers);
3021 	if (common->free_storage_on_release)
3022 		kfree(common);
3023 }
3024 
3025 
3026 /*-------------------------------------------------------------------------*/
3027 
3028 static int fsg_bind(struct usb_configuration *c, struct usb_function *f)
3029 {
3030 	struct fsg_dev		*fsg = fsg_from_func(f);
3031 	struct fsg_common	*common = fsg->common;
3032 	struct usb_gadget	*gadget = c->cdev->gadget;
3033 	int			i;
3034 	struct usb_ep		*ep;
3035 	unsigned		max_burst;
3036 	int			ret;
3037 	struct fsg_opts		*opts;
3038 
3039 	/* Don't allow to bind if we don't have at least one LUN */
3040 	ret = _fsg_common_get_max_lun(common);
3041 	if (ret < 0) {
3042 		pr_err("There should be at least one LUN.\n");
3043 		return -EINVAL;
3044 	}
3045 
3046 	opts = fsg_opts_from_func_inst(f->fi);
3047 	if (!opts->no_configfs) {
3048 		ret = fsg_common_set_cdev(fsg->common, c->cdev,
3049 					  fsg->common->can_stall);
3050 		if (ret)
3051 			return ret;
3052 		fsg_common_set_inquiry_string(fsg->common, NULL, NULL);
3053 		ret = fsg_common_run_thread(fsg->common);
3054 		if (ret)
3055 			return ret;
3056 	}
3057 
3058 	fsg->gadget = gadget;
3059 
3060 	/* New interface */
3061 	i = usb_interface_id(c, f);
3062 	if (i < 0)
3063 		goto fail;
3064 	fsg_intf_desc.bInterfaceNumber = i;
3065 	fsg->interface_number = i;
3066 
3067 	/* Find all the endpoints we will use */
3068 	ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_in_desc);
3069 	if (!ep)
3070 		goto autoconf_fail;
3071 	fsg->bulk_in = ep;
3072 
3073 	ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_out_desc);
3074 	if (!ep)
3075 		goto autoconf_fail;
3076 	fsg->bulk_out = ep;
3077 
3078 	/* Assume endpoint addresses are the same for both speeds */
3079 	fsg_hs_bulk_in_desc.bEndpointAddress =
3080 		fsg_fs_bulk_in_desc.bEndpointAddress;
3081 	fsg_hs_bulk_out_desc.bEndpointAddress =
3082 		fsg_fs_bulk_out_desc.bEndpointAddress;
3083 
3084 	/* Calculate bMaxBurst, we know packet size is 1024 */
3085 	max_burst = min_t(unsigned, FSG_BUFLEN / 1024, 15);
3086 
3087 	fsg_ss_bulk_in_desc.bEndpointAddress =
3088 		fsg_fs_bulk_in_desc.bEndpointAddress;
3089 	fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst;
3090 
3091 	fsg_ss_bulk_out_desc.bEndpointAddress =
3092 		fsg_fs_bulk_out_desc.bEndpointAddress;
3093 	fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst;
3094 
3095 	ret = usb_assign_descriptors(f, fsg_fs_function, fsg_hs_function,
3096 			fsg_ss_function, fsg_ss_function);
3097 	if (ret)
3098 		goto autoconf_fail;
3099 
3100 	return 0;
3101 
3102 autoconf_fail:
3103 	ERROR(fsg, "unable to autoconfigure all endpoints\n");
3104 	i = -ENOTSUPP;
3105 fail:
3106 	/* terminate the thread */
3107 	if (fsg->common->state != FSG_STATE_TERMINATED) {
3108 		raise_exception(fsg->common, FSG_STATE_EXIT);
3109 		wait_for_completion(&fsg->common->thread_notifier);
3110 	}
3111 	return i;
3112 }
3113 
3114 /****************************** ALLOCATE FUNCTION *************************/
3115 
3116 static void fsg_unbind(struct usb_configuration *c, struct usb_function *f)
3117 {
3118 	struct fsg_dev		*fsg = fsg_from_func(f);
3119 	struct fsg_common	*common = fsg->common;
3120 
3121 	DBG(fsg, "unbind\n");
3122 	if (fsg->common->fsg == fsg) {
3123 		fsg->common->new_fsg = NULL;
3124 		raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
3125 		/* FIXME: make interruptible or killable somehow? */
3126 		wait_event(common->fsg_wait, common->fsg != fsg);
3127 	}
3128 
3129 	usb_free_all_descriptors(&fsg->function);
3130 }
3131 
3132 static inline struct fsg_lun_opts *to_fsg_lun_opts(struct config_item *item)
3133 {
3134 	return container_of(to_config_group(item), struct fsg_lun_opts, group);
3135 }
3136 
3137 static inline struct fsg_opts *to_fsg_opts(struct config_item *item)
3138 {
3139 	return container_of(to_config_group(item), struct fsg_opts,
3140 			    func_inst.group);
3141 }
3142 
3143 static void fsg_lun_attr_release(struct config_item *item)
3144 {
3145 	struct fsg_lun_opts *lun_opts;
3146 
3147 	lun_opts = to_fsg_lun_opts(item);
3148 	kfree(lun_opts);
3149 }
3150 
3151 static struct configfs_item_operations fsg_lun_item_ops = {
3152 	.release		= fsg_lun_attr_release,
3153 };
3154 
3155 static ssize_t fsg_lun_opts_file_show(struct config_item *item, char *page)
3156 {
3157 	struct fsg_lun_opts *opts = to_fsg_lun_opts(item);
3158 	struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent);
3159 
3160 	return fsg_show_file(opts->lun, &fsg_opts->common->filesem, page);
3161 }
3162 
3163 static ssize_t fsg_lun_opts_file_store(struct config_item *item,
3164 				       const char *page, size_t len)
3165 {
3166 	struct fsg_lun_opts *opts = to_fsg_lun_opts(item);
3167 	struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent);
3168 
3169 	return fsg_store_file(opts->lun, &fsg_opts->common->filesem, page, len);
3170 }
3171 
3172 CONFIGFS_ATTR(fsg_lun_opts_, file);
3173 
3174 static ssize_t fsg_lun_opts_ro_show(struct config_item *item, char *page)
3175 {
3176 	return fsg_show_ro(to_fsg_lun_opts(item)->lun, page);
3177 }
3178 
3179 static ssize_t fsg_lun_opts_ro_store(struct config_item *item,
3180 				       const char *page, size_t len)
3181 {
3182 	struct fsg_lun_opts *opts = to_fsg_lun_opts(item);
3183 	struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent);
3184 
3185 	return fsg_store_ro(opts->lun, &fsg_opts->common->filesem, page, len);
3186 }
3187 
3188 CONFIGFS_ATTR(fsg_lun_opts_, ro);
3189 
3190 static ssize_t fsg_lun_opts_removable_show(struct config_item *item,
3191 					   char *page)
3192 {
3193 	return fsg_show_removable(to_fsg_lun_opts(item)->lun, page);
3194 }
3195 
3196 static ssize_t fsg_lun_opts_removable_store(struct config_item *item,
3197 				       const char *page, size_t len)
3198 {
3199 	return fsg_store_removable(to_fsg_lun_opts(item)->lun, page, len);
3200 }
3201 
3202 CONFIGFS_ATTR(fsg_lun_opts_, removable);
3203 
3204 static ssize_t fsg_lun_opts_cdrom_show(struct config_item *item, char *page)
3205 {
3206 	return fsg_show_cdrom(to_fsg_lun_opts(item)->lun, page);
3207 }
3208 
3209 static ssize_t fsg_lun_opts_cdrom_store(struct config_item *item,
3210 				       const char *page, size_t len)
3211 {
3212 	struct fsg_lun_opts *opts = to_fsg_lun_opts(item);
3213 	struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent);
3214 
3215 	return fsg_store_cdrom(opts->lun, &fsg_opts->common->filesem, page,
3216 			       len);
3217 }
3218 
3219 CONFIGFS_ATTR(fsg_lun_opts_, cdrom);
3220 
3221 static ssize_t fsg_lun_opts_nofua_show(struct config_item *item, char *page)
3222 {
3223 	return fsg_show_nofua(to_fsg_lun_opts(item)->lun, page);
3224 }
3225 
3226 static ssize_t fsg_lun_opts_nofua_store(struct config_item *item,
3227 				       const char *page, size_t len)
3228 {
3229 	return fsg_store_nofua(to_fsg_lun_opts(item)->lun, page, len);
3230 }
3231 
3232 CONFIGFS_ATTR(fsg_lun_opts_, nofua);
3233 
3234 static struct configfs_attribute *fsg_lun_attrs[] = {
3235 	&fsg_lun_opts_attr_file,
3236 	&fsg_lun_opts_attr_ro,
3237 	&fsg_lun_opts_attr_removable,
3238 	&fsg_lun_opts_attr_cdrom,
3239 	&fsg_lun_opts_attr_nofua,
3240 	NULL,
3241 };
3242 
3243 static struct config_item_type fsg_lun_type = {
3244 	.ct_item_ops	= &fsg_lun_item_ops,
3245 	.ct_attrs	= fsg_lun_attrs,
3246 	.ct_owner	= THIS_MODULE,
3247 };
3248 
3249 static struct config_group *fsg_lun_make(struct config_group *group,
3250 					 const char *name)
3251 {
3252 	struct fsg_lun_opts *opts;
3253 	struct fsg_opts *fsg_opts;
3254 	struct fsg_lun_config config;
3255 	char *num_str;
3256 	u8 num;
3257 	int ret;
3258 
3259 	num_str = strchr(name, '.');
3260 	if (!num_str) {
3261 		pr_err("Unable to locate . in LUN.NUMBER\n");
3262 		return ERR_PTR(-EINVAL);
3263 	}
3264 	num_str++;
3265 
3266 	ret = kstrtou8(num_str, 0, &num);
3267 	if (ret)
3268 		return ERR_PTR(ret);
3269 
3270 	fsg_opts = to_fsg_opts(&group->cg_item);
3271 	if (num >= FSG_MAX_LUNS)
3272 		return ERR_PTR(-ERANGE);
3273 
3274 	mutex_lock(&fsg_opts->lock);
3275 	if (fsg_opts->refcnt || fsg_opts->common->luns[num]) {
3276 		ret = -EBUSY;
3277 		goto out;
3278 	}
3279 
3280 	opts = kzalloc(sizeof(*opts), GFP_KERNEL);
3281 	if (!opts) {
3282 		ret = -ENOMEM;
3283 		goto out;
3284 	}
3285 
3286 	memset(&config, 0, sizeof(config));
3287 	config.removable = true;
3288 
3289 	ret = fsg_common_create_lun(fsg_opts->common, &config, num, name,
3290 				    (const char **)&group->cg_item.ci_name);
3291 	if (ret) {
3292 		kfree(opts);
3293 		goto out;
3294 	}
3295 	opts->lun = fsg_opts->common->luns[num];
3296 	opts->lun_id = num;
3297 	mutex_unlock(&fsg_opts->lock);
3298 
3299 	config_group_init_type_name(&opts->group, name, &fsg_lun_type);
3300 
3301 	return &opts->group;
3302 out:
3303 	mutex_unlock(&fsg_opts->lock);
3304 	return ERR_PTR(ret);
3305 }
3306 
3307 static void fsg_lun_drop(struct config_group *group, struct config_item *item)
3308 {
3309 	struct fsg_lun_opts *lun_opts;
3310 	struct fsg_opts *fsg_opts;
3311 
3312 	lun_opts = to_fsg_lun_opts(item);
3313 	fsg_opts = to_fsg_opts(&group->cg_item);
3314 
3315 	mutex_lock(&fsg_opts->lock);
3316 	if (fsg_opts->refcnt) {
3317 		struct config_item *gadget;
3318 
3319 		gadget = group->cg_item.ci_parent->ci_parent;
3320 		unregister_gadget_item(gadget);
3321 	}
3322 
3323 	fsg_common_remove_lun(lun_opts->lun);
3324 	fsg_opts->common->luns[lun_opts->lun_id] = NULL;
3325 	lun_opts->lun_id = 0;
3326 	mutex_unlock(&fsg_opts->lock);
3327 
3328 	config_item_put(item);
3329 }
3330 
3331 static void fsg_attr_release(struct config_item *item)
3332 {
3333 	struct fsg_opts *opts = to_fsg_opts(item);
3334 
3335 	usb_put_function_instance(&opts->func_inst);
3336 }
3337 
3338 static struct configfs_item_operations fsg_item_ops = {
3339 	.release		= fsg_attr_release,
3340 };
3341 
3342 static ssize_t fsg_opts_stall_show(struct config_item *item, char *page)
3343 {
3344 	struct fsg_opts *opts = to_fsg_opts(item);
3345 	int result;
3346 
3347 	mutex_lock(&opts->lock);
3348 	result = sprintf(page, "%d", opts->common->can_stall);
3349 	mutex_unlock(&opts->lock);
3350 
3351 	return result;
3352 }
3353 
3354 static ssize_t fsg_opts_stall_store(struct config_item *item, const char *page,
3355 				    size_t len)
3356 {
3357 	struct fsg_opts *opts = to_fsg_opts(item);
3358 	int ret;
3359 	bool stall;
3360 
3361 	mutex_lock(&opts->lock);
3362 
3363 	if (opts->refcnt) {
3364 		mutex_unlock(&opts->lock);
3365 		return -EBUSY;
3366 	}
3367 
3368 	ret = strtobool(page, &stall);
3369 	if (!ret) {
3370 		opts->common->can_stall = stall;
3371 		ret = len;
3372 	}
3373 
3374 	mutex_unlock(&opts->lock);
3375 
3376 	return ret;
3377 }
3378 
3379 CONFIGFS_ATTR(fsg_opts_, stall);
3380 
3381 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
3382 static ssize_t fsg_opts_num_buffers_show(struct config_item *item, char *page)
3383 {
3384 	struct fsg_opts *opts = to_fsg_opts(item);
3385 	int result;
3386 
3387 	mutex_lock(&opts->lock);
3388 	result = sprintf(page, "%d", opts->common->fsg_num_buffers);
3389 	mutex_unlock(&opts->lock);
3390 
3391 	return result;
3392 }
3393 
3394 static ssize_t fsg_opts_num_buffers_store(struct config_item *item,
3395 					  const char *page, size_t len)
3396 {
3397 	struct fsg_opts *opts = to_fsg_opts(item);
3398 	int ret;
3399 	u8 num;
3400 
3401 	mutex_lock(&opts->lock);
3402 	if (opts->refcnt) {
3403 		ret = -EBUSY;
3404 		goto end;
3405 	}
3406 	ret = kstrtou8(page, 0, &num);
3407 	if (ret)
3408 		goto end;
3409 
3410 	ret = fsg_num_buffers_validate(num);
3411 	if (ret)
3412 		goto end;
3413 
3414 	fsg_common_set_num_buffers(opts->common, num);
3415 	ret = len;
3416 
3417 end:
3418 	mutex_unlock(&opts->lock);
3419 	return ret;
3420 }
3421 
3422 CONFIGFS_ATTR(fsg_opts_, num_buffers);
3423 #endif
3424 
3425 static struct configfs_attribute *fsg_attrs[] = {
3426 	&fsg_opts_attr_stall,
3427 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
3428 	&fsg_opts_attr_num_buffers,
3429 #endif
3430 	NULL,
3431 };
3432 
3433 static struct configfs_group_operations fsg_group_ops = {
3434 	.make_group	= fsg_lun_make,
3435 	.drop_item	= fsg_lun_drop,
3436 };
3437 
3438 static struct config_item_type fsg_func_type = {
3439 	.ct_item_ops	= &fsg_item_ops,
3440 	.ct_group_ops	= &fsg_group_ops,
3441 	.ct_attrs	= fsg_attrs,
3442 	.ct_owner	= THIS_MODULE,
3443 };
3444 
3445 static void fsg_free_inst(struct usb_function_instance *fi)
3446 {
3447 	struct fsg_opts *opts;
3448 
3449 	opts = fsg_opts_from_func_inst(fi);
3450 	fsg_common_put(opts->common);
3451 	kfree(opts);
3452 }
3453 
3454 static struct usb_function_instance *fsg_alloc_inst(void)
3455 {
3456 	struct fsg_opts *opts;
3457 	struct fsg_lun_config config;
3458 	int rc;
3459 
3460 	opts = kzalloc(sizeof(*opts), GFP_KERNEL);
3461 	if (!opts)
3462 		return ERR_PTR(-ENOMEM);
3463 	mutex_init(&opts->lock);
3464 	opts->func_inst.free_func_inst = fsg_free_inst;
3465 	opts->common = fsg_common_setup(opts->common);
3466 	if (IS_ERR(opts->common)) {
3467 		rc = PTR_ERR(opts->common);
3468 		goto release_opts;
3469 	}
3470 
3471 	rc = fsg_common_set_num_buffers(opts->common,
3472 					CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS);
3473 	if (rc)
3474 		goto release_opts;
3475 
3476 	pr_info(FSG_DRIVER_DESC ", version: " FSG_DRIVER_VERSION "\n");
3477 
3478 	memset(&config, 0, sizeof(config));
3479 	config.removable = true;
3480 	rc = fsg_common_create_lun(opts->common, &config, 0, "lun.0",
3481 			(const char **)&opts->func_inst.group.cg_item.ci_name);
3482 	if (rc)
3483 		goto release_buffers;
3484 
3485 	opts->lun0.lun = opts->common->luns[0];
3486 	opts->lun0.lun_id = 0;
3487 
3488 	config_group_init_type_name(&opts->func_inst.group, "", &fsg_func_type);
3489 
3490 	config_group_init_type_name(&opts->lun0.group, "lun.0", &fsg_lun_type);
3491 	configfs_add_default_group(&opts->lun0.group, &opts->func_inst.group);
3492 
3493 	return &opts->func_inst;
3494 
3495 release_buffers:
3496 	fsg_common_free_buffers(opts->common);
3497 release_opts:
3498 	kfree(opts);
3499 	return ERR_PTR(rc);
3500 }
3501 
3502 static void fsg_free(struct usb_function *f)
3503 {
3504 	struct fsg_dev *fsg;
3505 	struct fsg_opts *opts;
3506 
3507 	fsg = container_of(f, struct fsg_dev, function);
3508 	opts = container_of(f->fi, struct fsg_opts, func_inst);
3509 
3510 	mutex_lock(&opts->lock);
3511 	opts->refcnt--;
3512 	mutex_unlock(&opts->lock);
3513 
3514 	kfree(fsg);
3515 }
3516 
3517 static struct usb_function *fsg_alloc(struct usb_function_instance *fi)
3518 {
3519 	struct fsg_opts *opts = fsg_opts_from_func_inst(fi);
3520 	struct fsg_common *common = opts->common;
3521 	struct fsg_dev *fsg;
3522 
3523 	fsg = kzalloc(sizeof(*fsg), GFP_KERNEL);
3524 	if (unlikely(!fsg))
3525 		return ERR_PTR(-ENOMEM);
3526 
3527 	mutex_lock(&opts->lock);
3528 	opts->refcnt++;
3529 	mutex_unlock(&opts->lock);
3530 
3531 	fsg->function.name	= FSG_DRIVER_DESC;
3532 	fsg->function.bind	= fsg_bind;
3533 	fsg->function.unbind	= fsg_unbind;
3534 	fsg->function.setup	= fsg_setup;
3535 	fsg->function.set_alt	= fsg_set_alt;
3536 	fsg->function.disable	= fsg_disable;
3537 	fsg->function.free_func	= fsg_free;
3538 
3539 	fsg->common               = common;
3540 
3541 	return &fsg->function;
3542 }
3543 
3544 DECLARE_USB_FUNCTION_INIT(mass_storage, fsg_alloc_inst, fsg_alloc);
3545 MODULE_LICENSE("GPL");
3546 MODULE_AUTHOR("Michal Nazarewicz");
3547 
3548 /************************* Module parameters *************************/
3549 
3550 
3551 void fsg_config_from_params(struct fsg_config *cfg,
3552 		       const struct fsg_module_parameters *params,
3553 		       unsigned int fsg_num_buffers)
3554 {
3555 	struct fsg_lun_config *lun;
3556 	unsigned i;
3557 
3558 	/* Configure LUNs */
3559 	cfg->nluns =
3560 		min(params->luns ?: (params->file_count ?: 1u),
3561 		    (unsigned)FSG_MAX_LUNS);
3562 	for (i = 0, lun = cfg->luns; i < cfg->nluns; ++i, ++lun) {
3563 		lun->ro = !!params->ro[i];
3564 		lun->cdrom = !!params->cdrom[i];
3565 		lun->removable = !!params->removable[i];
3566 		lun->filename =
3567 			params->file_count > i && params->file[i][0]
3568 			? params->file[i]
3569 			: NULL;
3570 	}
3571 
3572 	/* Let MSF use defaults */
3573 	cfg->vendor_name = NULL;
3574 	cfg->product_name = NULL;
3575 
3576 	cfg->ops = NULL;
3577 	cfg->private_data = NULL;
3578 
3579 	/* Finalise */
3580 	cfg->can_stall = params->stall;
3581 	cfg->fsg_num_buffers = fsg_num_buffers;
3582 }
3583 EXPORT_SYMBOL_GPL(fsg_config_from_params);
3584