1 /******************************************************************************* 2 * Filename: target_core_fabric_lib.c 3 * 4 * This file contains generic high level protocol identifier and PR 5 * handlers for TCM fabric modules 6 * 7 * (c) Copyright 2010-2013 Datera, Inc. 8 * 9 * Nicholas A. Bellinger <nab@linux-iscsi.org> 10 * 11 * This program is free software; you can redistribute it and/or modify 12 * it under the terms of the GNU General Public License as published by 13 * the Free Software Foundation; either version 2 of the License, or 14 * (at your option) any later version. 15 * 16 * This program is distributed in the hope that it will be useful, 17 * but WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 * GNU General Public License for more details. 20 * 21 * You should have received a copy of the GNU General Public License 22 * along with this program; if not, write to the Free Software 23 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. 24 * 25 ******************************************************************************/ 26 27 /* 28 * See SPC4, section 7.5 "Protocol specific parameters" for details 29 * on the formats implemented in this file. 30 */ 31 32 #include <linux/kernel.h> 33 #include <linux/string.h> 34 #include <linux/ctype.h> 35 #include <linux/spinlock.h> 36 #include <linux/export.h> 37 #include <asm/unaligned.h> 38 39 #include <scsi/scsi_proto.h> 40 41 #include <target/target_core_base.h> 42 #include <target/target_core_fabric.h> 43 44 #include "target_core_internal.h" 45 #include "target_core_pr.h" 46 47 48 static int sas_get_pr_transport_id( 49 struct se_node_acl *nacl, 50 int *format_code, 51 unsigned char *buf) 52 { 53 int ret; 54 55 /* Skip over 'naa. prefix */ 56 ret = hex2bin(&buf[4], &nacl->initiatorname[4], 8); 57 if (ret) { 58 pr_debug("%s: invalid hex string\n", __func__); 59 return ret; 60 } 61 62 return 24; 63 } 64 65 static int fc_get_pr_transport_id( 66 struct se_node_acl *se_nacl, 67 int *format_code, 68 unsigned char *buf) 69 { 70 unsigned char *ptr; 71 int i, ret; 72 u32 off = 8; 73 74 /* 75 * We convert the ASCII formatted N Port name into a binary 76 * encoded TransportID. 77 */ 78 ptr = &se_nacl->initiatorname[0]; 79 for (i = 0; i < 24; ) { 80 if (!strncmp(&ptr[i], ":", 1)) { 81 i++; 82 continue; 83 } 84 ret = hex2bin(&buf[off++], &ptr[i], 1); 85 if (ret < 0) { 86 pr_debug("%s: invalid hex string\n", __func__); 87 return ret; 88 } 89 i += 2; 90 } 91 /* 92 * The FC Transport ID is a hardcoded 24-byte length 93 */ 94 return 24; 95 } 96 97 static int sbp_get_pr_transport_id( 98 struct se_node_acl *nacl, 99 int *format_code, 100 unsigned char *buf) 101 { 102 int ret; 103 104 ret = hex2bin(&buf[8], nacl->initiatorname, 8); 105 if (ret) { 106 pr_debug("%s: invalid hex string\n", __func__); 107 return ret; 108 } 109 110 return 24; 111 } 112 113 static int srp_get_pr_transport_id( 114 struct se_node_acl *nacl, 115 int *format_code, 116 unsigned char *buf) 117 { 118 const char *p; 119 unsigned len, count, leading_zero_bytes; 120 int rc; 121 122 p = nacl->initiatorname; 123 if (strncasecmp(p, "0x", 2) == 0) 124 p += 2; 125 len = strlen(p); 126 if (len % 2) 127 return -EINVAL; 128 129 count = min(len / 2, 16U); 130 leading_zero_bytes = 16 - count; 131 memset(buf + 8, 0, leading_zero_bytes); 132 rc = hex2bin(buf + 8 + leading_zero_bytes, p, count); 133 if (rc < 0) { 134 pr_debug("hex2bin failed for %s: %d\n", __func__, rc); 135 return rc; 136 } 137 138 return 24; 139 } 140 141 static int iscsi_get_pr_transport_id( 142 struct se_node_acl *se_nacl, 143 struct t10_pr_registration *pr_reg, 144 int *format_code, 145 unsigned char *buf) 146 { 147 u32 off = 4, padding = 0; 148 u16 len = 0; 149 150 spin_lock_irq(&se_nacl->nacl_sess_lock); 151 /* 152 * From spc4r17 Section 7.5.4.6: TransportID for initiator 153 * ports using SCSI over iSCSI. 154 * 155 * The null-terminated, null-padded (see 4.4.2) ISCSI NAME field 156 * shall contain the iSCSI name of an iSCSI initiator node (see 157 * RFC 3720). The first ISCSI NAME field byte containing an ASCII 158 * null character terminates the ISCSI NAME field without regard for 159 * the specified length of the iSCSI TransportID or the contents of 160 * the ADDITIONAL LENGTH field. 161 */ 162 len = sprintf(&buf[off], "%s", se_nacl->initiatorname); 163 /* 164 * Add Extra byte for NULL terminator 165 */ 166 len++; 167 /* 168 * If there is ISID present with the registration and *format code == 1 169 * 1, use iSCSI Initiator port TransportID format. 170 * 171 * Otherwise use iSCSI Initiator device TransportID format that 172 * does not contain the ASCII encoded iSCSI Initiator iSID value 173 * provied by the iSCSi Initiator during the iSCSI login process. 174 */ 175 if ((*format_code == 1) && (pr_reg->isid_present_at_reg)) { 176 /* 177 * Set FORMAT CODE 01b for iSCSI Initiator port TransportID 178 * format. 179 */ 180 buf[0] |= 0x40; 181 /* 182 * From spc4r17 Section 7.5.4.6: TransportID for initiator 183 * ports using SCSI over iSCSI. Table 390 184 * 185 * The SEPARATOR field shall contain the five ASCII 186 * characters ",i,0x". 187 * 188 * The null-terminated, null-padded ISCSI INITIATOR SESSION ID 189 * field shall contain the iSCSI initiator session identifier 190 * (see RFC 3720) in the form of ASCII characters that are the 191 * hexadecimal digits converted from the binary iSCSI initiator 192 * session identifier value. The first ISCSI INITIATOR SESSION 193 * ID field byte containing an ASCII null character 194 */ 195 buf[off+len] = 0x2c; off++; /* ASCII Character: "," */ 196 buf[off+len] = 0x69; off++; /* ASCII Character: "i" */ 197 buf[off+len] = 0x2c; off++; /* ASCII Character: "," */ 198 buf[off+len] = 0x30; off++; /* ASCII Character: "0" */ 199 buf[off+len] = 0x78; off++; /* ASCII Character: "x" */ 200 len += 5; 201 buf[off+len] = pr_reg->pr_reg_isid[0]; off++; 202 buf[off+len] = pr_reg->pr_reg_isid[1]; off++; 203 buf[off+len] = pr_reg->pr_reg_isid[2]; off++; 204 buf[off+len] = pr_reg->pr_reg_isid[3]; off++; 205 buf[off+len] = pr_reg->pr_reg_isid[4]; off++; 206 buf[off+len] = pr_reg->pr_reg_isid[5]; off++; 207 buf[off+len] = '\0'; off++; 208 len += 7; 209 } 210 spin_unlock_irq(&se_nacl->nacl_sess_lock); 211 /* 212 * The ADDITIONAL LENGTH field specifies the number of bytes that follow 213 * in the TransportID. The additional length shall be at least 20 and 214 * shall be a multiple of four. 215 */ 216 padding = ((-len) & 3); 217 if (padding != 0) 218 len += padding; 219 220 put_unaligned_be16(len, &buf[2]); 221 /* 222 * Increment value for total payload + header length for 223 * full status descriptor 224 */ 225 len += 4; 226 227 return len; 228 } 229 230 static int iscsi_get_pr_transport_id_len( 231 struct se_node_acl *se_nacl, 232 struct t10_pr_registration *pr_reg, 233 int *format_code) 234 { 235 u32 len = 0, padding = 0; 236 237 spin_lock_irq(&se_nacl->nacl_sess_lock); 238 len = strlen(se_nacl->initiatorname); 239 /* 240 * Add extra byte for NULL terminator 241 */ 242 len++; 243 /* 244 * If there is ISID present with the registration, use format code: 245 * 01b: iSCSI Initiator port TransportID format 246 * 247 * If there is not an active iSCSI session, use format code: 248 * 00b: iSCSI Initiator device TransportID format 249 */ 250 if (pr_reg->isid_present_at_reg) { 251 len += 5; /* For ",i,0x" ASCII separator */ 252 len += 7; /* For iSCSI Initiator Session ID + Null terminator */ 253 *format_code = 1; 254 } else 255 *format_code = 0; 256 spin_unlock_irq(&se_nacl->nacl_sess_lock); 257 /* 258 * The ADDITIONAL LENGTH field specifies the number of bytes that follow 259 * in the TransportID. The additional length shall be at least 20 and 260 * shall be a multiple of four. 261 */ 262 padding = ((-len) & 3); 263 if (padding != 0) 264 len += padding; 265 /* 266 * Increment value for total payload + header length for 267 * full status descriptor 268 */ 269 len += 4; 270 271 return len; 272 } 273 274 static char *iscsi_parse_pr_out_transport_id( 275 struct se_portal_group *se_tpg, 276 char *buf, 277 u32 *out_tid_len, 278 char **port_nexus_ptr) 279 { 280 char *p; 281 u32 tid_len, padding; 282 int i; 283 u16 add_len; 284 u8 format_code = (buf[0] & 0xc0); 285 /* 286 * Check for FORMAT CODE 00b or 01b from spc4r17, section 7.5.4.6: 287 * 288 * TransportID for initiator ports using SCSI over iSCSI, 289 * from Table 388 -- iSCSI TransportID formats. 290 * 291 * 00b Initiator port is identified using the world wide unique 292 * SCSI device name of the iSCSI initiator 293 * device containing the initiator port (see table 389). 294 * 01b Initiator port is identified using the world wide unique 295 * initiator port identifier (see table 390).10b to 11b 296 * Reserved 297 */ 298 if ((format_code != 0x00) && (format_code != 0x40)) { 299 pr_err("Illegal format code: 0x%02x for iSCSI" 300 " Initiator Transport ID\n", format_code); 301 return NULL; 302 } 303 /* 304 * If the caller wants the TransportID Length, we set that value for the 305 * entire iSCSI Tarnsport ID now. 306 */ 307 if (out_tid_len) { 308 /* The shift works thanks to integer promotion rules */ 309 add_len = get_unaligned_be16(&buf[2]); 310 311 tid_len = strlen(&buf[4]); 312 tid_len += 4; /* Add four bytes for iSCSI Transport ID header */ 313 tid_len += 1; /* Add one byte for NULL terminator */ 314 padding = ((-tid_len) & 3); 315 if (padding != 0) 316 tid_len += padding; 317 318 if ((add_len + 4) != tid_len) { 319 pr_debug("LIO-Target Extracted add_len: %hu " 320 "does not match calculated tid_len: %u," 321 " using tid_len instead\n", add_len+4, tid_len); 322 *out_tid_len = tid_len; 323 } else 324 *out_tid_len = (add_len + 4); 325 } 326 /* 327 * Check for ',i,0x' separator between iSCSI Name and iSCSI Initiator 328 * Session ID as defined in Table 390 - iSCSI initiator port TransportID 329 * format. 330 */ 331 if (format_code == 0x40) { 332 p = strstr(&buf[4], ",i,0x"); 333 if (!p) { 334 pr_err("Unable to locate \",i,0x\" separator" 335 " for Initiator port identifier: %s\n", 336 &buf[4]); 337 return NULL; 338 } 339 *p = '\0'; /* Terminate iSCSI Name */ 340 p += 5; /* Skip over ",i,0x" separator */ 341 342 *port_nexus_ptr = p; 343 /* 344 * Go ahead and do the lower case conversion of the received 345 * 12 ASCII characters representing the ISID in the TransportID 346 * for comparison against the running iSCSI session's ISID from 347 * iscsi_target.c:lio_sess_get_initiator_sid() 348 */ 349 for (i = 0; i < 12; i++) { 350 if (isdigit(*p)) { 351 p++; 352 continue; 353 } 354 *p = tolower(*p); 355 p++; 356 } 357 } 358 359 return &buf[4]; 360 } 361 362 int target_get_pr_transport_id_len(struct se_node_acl *nacl, 363 struct t10_pr_registration *pr_reg, int *format_code) 364 { 365 switch (nacl->se_tpg->proto_id) { 366 case SCSI_PROTOCOL_FCP: 367 case SCSI_PROTOCOL_SBP: 368 case SCSI_PROTOCOL_SRP: 369 case SCSI_PROTOCOL_SAS: 370 break; 371 case SCSI_PROTOCOL_ISCSI: 372 return iscsi_get_pr_transport_id_len(nacl, pr_reg, format_code); 373 default: 374 pr_err("Unknown proto_id: 0x%02x\n", nacl->se_tpg->proto_id); 375 return -EINVAL; 376 } 377 378 /* 379 * Most transports use a fixed length 24 byte identifier. 380 */ 381 *format_code = 0; 382 return 24; 383 } 384 385 int target_get_pr_transport_id(struct se_node_acl *nacl, 386 struct t10_pr_registration *pr_reg, int *format_code, 387 unsigned char *buf) 388 { 389 switch (nacl->se_tpg->proto_id) { 390 case SCSI_PROTOCOL_SAS: 391 return sas_get_pr_transport_id(nacl, format_code, buf); 392 case SCSI_PROTOCOL_SBP: 393 return sbp_get_pr_transport_id(nacl, format_code, buf); 394 case SCSI_PROTOCOL_SRP: 395 return srp_get_pr_transport_id(nacl, format_code, buf); 396 case SCSI_PROTOCOL_FCP: 397 return fc_get_pr_transport_id(nacl, format_code, buf); 398 case SCSI_PROTOCOL_ISCSI: 399 return iscsi_get_pr_transport_id(nacl, pr_reg, format_code, 400 buf); 401 default: 402 pr_err("Unknown proto_id: 0x%02x\n", nacl->se_tpg->proto_id); 403 return -EINVAL; 404 } 405 } 406 407 const char *target_parse_pr_out_transport_id(struct se_portal_group *tpg, 408 char *buf, u32 *out_tid_len, char **port_nexus_ptr) 409 { 410 u32 offset; 411 412 switch (tpg->proto_id) { 413 case SCSI_PROTOCOL_SAS: 414 /* 415 * Assume the FORMAT CODE 00b from spc4r17, 7.5.4.7 TransportID 416 * for initiator ports using SCSI over SAS Serial SCSI Protocol. 417 */ 418 offset = 4; 419 break; 420 case SCSI_PROTOCOL_SBP: 421 case SCSI_PROTOCOL_SRP: 422 case SCSI_PROTOCOL_FCP: 423 offset = 8; 424 break; 425 case SCSI_PROTOCOL_ISCSI: 426 return iscsi_parse_pr_out_transport_id(tpg, buf, out_tid_len, 427 port_nexus_ptr); 428 default: 429 pr_err("Unknown proto_id: 0x%02x\n", tpg->proto_id); 430 return NULL; 431 } 432 433 *port_nexus_ptr = NULL; 434 *out_tid_len = 24; 435 return buf + offset; 436 } 437