scsi: target: Handle short iSIDs

SPC4 has:

The first ISCSI INITIATOR SESSION ID field byte containing an ASCII null
character terminates the ISCSI INITIATOR SESSION ID field without regard
for the

scsi: target: Handle short iSIDs

SPC4 has:

The first ISCSI INITIATOR SESSION ID field byte containing an ASCII null
character terminates the ISCSI INITIATOR SESSION ID field without regard
for the specified length of the iSCSI TransportID or the contents of the
ADDITIONAL LENGTH field.
----------------------------------------

which sounds like we can get an iSID shorter than 12 chars. SPC and the
iSCSI RFC do not say how to handle that case other than just cutting off
the iSID. This patch just makes sure that if we get an iSID like that, we
only copy/send that string.

There is no OS that does this right now, so there was no test case. I did
test with sg utils to check it works as expected and nothing breaks.

Link: https://lore.kernel.org/r/1593654203-12442-8-git-send-email-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: target: Fix iscsi transport id buf len calculation

The isid returned to the initiator is in string format which is 12
bytes. We also only add 1 terminating NULL and not one after the initiator

scsi: target: Fix iscsi transport id buf len calculation

The isid returned to the initiator is in string format which is 12
bytes. We also only add 1 terminating NULL and not one after the initiator
name and another one after the isid.

Link: https://lore.kernel.org/r/1593654203-12442-7-git-send-email-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: target: Fix iscsi transport id buffer setup

This fixes the following bugs with the transport id setup for iscsi:

1. Incorrectly adding NULL after initiator name for TPID format 1.

2. For T

scsi: target: Fix iscsi transport id buffer setup

This fixes the following bugs with the transport id setup for iscsi:

1. Incorrectly adding NULL after initiator name for TPID format 1.

2. For TPID format 1 buffer setup we are doing off+len, off++ and then
also len+=some_value. This results in the isid going past buffer
boundaries when we then do buf[off+len]

3. The pr_reg_isid is the isid in string format which is 12 bytes, but we
are only copying 6 bytes.

Link: https://lore.kernel.org/r/1593654203-12442-6-git-send-email-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: target: Fix iscsi transport id parsing

The length passed in the ADDITIONAL LENGTH field includes padding and the
terminating NULL for the last field (name or isid depending on the format),
so

scsi: target: Fix iscsi transport id parsing

The length passed in the ADDITIONAL LENGTH field includes padding and the
terminating NULL for the last field (name or isid depending on the format),
so we should not also try to calculate that and then double add that to the
returned length.

Link: https://lore.kernel.org/r/1593654203-12442-5-git-send-email-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: target: fix PR IN / READ FULL STATUS for FC

Creation of the response to READ FULL STATUS fails for FC based
reservations. Reason is the too high loop limit (< 24) in
fc_get_pr_transport_id().

scsi: target: fix PR IN / READ FULL STATUS for FC

Creation of the response to READ FULL STATUS fails for FC based
reservations. Reason is the too high loop limit (< 24) in
fc_get_pr_transport_id(). The string representation of FC WWPN is 23 chars
long only ("11:22:33:44:55:66:77:88"). So when i is 23, the loop body is
executed a last time for the ending '\0' of the string and thus hex2bin()
reports an error.

Link: https://lore.kernel.org/r/20200408132610.14623-3-bstroesser@ts.fujitsu.com
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: target: Write NULL to *port_nexus_ptr if no ISID

This patch fixes a minor flaw that could be triggered by a PR OUT RESERVE
on iSCSI, if TRANSPORT IDs with and without ISID are used in the same

scsi: target: Write NULL to *port_nexus_ptr if no ISID

This patch fixes a minor flaw that could be triggered by a PR OUT RESERVE
on iSCSI, if TRANSPORT IDs with and without ISID are used in the same
command. In case an ISCSI Transport ID has no ISID, port_nexus_ptr was not
used to write NULL, so value from previous call might persist. I don't
know if that ever could happen, but with the change the code is cleaner, I
think.

Link: https://lore.kernel.org/r/20200408132610.14623-2-bstroesser@ts.fujitsu.com
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: target: core: Fix a pr_debug() argument

Print the string for which conversion failed instead of printing the
function name twice.

Fixes: 2650d71e244f ("target: move transport ID handling to t

scsi: target: core: Fix a pr_debug() argument

Print the string for which conversion failed instead of printing the
function name twice.

Fixes: 2650d71e244f ("target: move transport ID handling to the core")
Cc: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20191107215525.64415-1-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of th

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
59 temple place suite 330 boston ma 02111 1307 usa

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1334 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

target-core: don't use "const char*" for a buffer that is written to

iscsi_parse_pr_out_transport_id launders the const away via a call to
strstr(), and then modifies the buffer (writing a nul byte)

target-core: don't use "const char*" for a buffer that is written to

iscsi_parse_pr_out_transport_id launders the const away via a call to
strstr(), and then modifies the buffer (writing a nul byte) through
the return value. It's cleaner to be honest and simply declare the
parameter as "char*", fixing up the call chain, and allowing us to
drop the cast in the return statement.

Amusingly, the two current callers found it necessary to cast a
non-const pointer to a const.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

target: Use {get,put}_unaligned_be*() instead of open coding these functions

Introduce the function get_unaligned_be24(). Use {get,put}_unaligned_be*()
where appropriate. This patch does not change

target: Use {get,put}_unaligned_be*() instead of open coding these functions

Introduce the function get_unaligned_be24(). Use {get,put}_unaligned_be*()
where appropriate. This patch does not change any functionality.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Cc: Andy Grover <agrover@redhat.com>
Cc: David Disseldorp <ddiss@suse.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

target: explicitly include scsi_proto.h in target_core_fabric_lib.c

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James

target: explicitly include scsi_proto.h in target_core_fabric_lib.c

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <JBottomley@Odin.com>

show more ...

target: Minimize SCSI header #include directives

Only include SCSI initiator header files in target code that needs
these header files, namely the SCSI pass-through code and the tcm_loop
driver. Cha

target: Minimize SCSI header #include directives

Only include SCSI initiator header files in target code that needs
these header files, namely the SCSI pass-through code and the tcm_loop
driver. Change SCSI_SENSE_BUFFERSIZE into TRANSPORT_SENSE_BUFFER in
target code because the former is intended for initiator code and the
latter for target code. With this patch the only initiator include
directives in target code that remain are as follows:

$ git grep -nHE 'include .scsi/(scsi.h|scsi_host.h|scsi_device.h|scsi_cmnd.h)' drivers/target drivers/infiniband/ulp/{isert,srpt} drivers/usb/gadget/legacy/tcm_*.[ch] drivers/{vhost,xen} include/{target,trace/events/target.h}
drivers/target/loopback/tcm_loop.c:29:#include <scsi/scsi.h>
drivers/target/loopback/tcm_loop.c:31:#include <scsi/scsi_host.h>
drivers/target/loopback/tcm_loop.c:32:#include <scsi/scsi_device.h>
drivers/target/loopback/tcm_loop.c:33:#include <scsi/scsi_cmnd.h>
drivers/target/target_core_pscsi.c:39:#include <scsi/scsi_device.h>
drivers/target/target_core_pscsi.c:40:#include <scsi/scsi_host.h>
drivers/xen/xen-scsiback.c:52:#include <scsi/scsi_host.h> /* SG_ALL */

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>

show more ...

target: target_core_configfs.h is not needed in fabric drivers

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

target: move transport ID handling to the core

Now that struct se_portal_group contains a protocol identifier field we can
take all the code to format an parse protocol identifiers in CDBs into comm

target: move transport ID handling to the core

Now that struct se_portal_group contains a protocol identifier field we can
take all the code to format an parse protocol identifiers in CDBs into common
code instead of leaving this to low-level drivers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

target: remove the get_fabric_proto_ident method

Now that we store the protocol identifier in the tpg structure we don't
need this method.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-b

target: remove the get_fabric_proto_ident method

Now that we store the protocol identifier in the tpg structure we don't
need this method.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

target: fix pr_out length in iscsi_parse_pr_out_transport_id

Old code in iscsi_parse_pr_out_transport_id() was obviously buggy
and effectively ignored the high byte.

Found by coverity.

Signed-off-

target: fix pr_out length in iscsi_parse_pr_out_transport_id

Old code in iscsi_parse_pr_out_transport_id() was obviously buggy
and effectively ignored the high byte.

Found by coverity.

Signed-off-by: Joern Engel <joern@logfs.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

target: Update copyright ownership/year information to 2013

Update copyright ownership/year information for target-core,
loopback, iscsi-target, tcm_qla2xx, vhost and iser-target.

Signed-off-by: Ni

target: Update copyright ownership/year information to 2013

Update copyright ownership/year information for target-core,
loopback, iscsi-target, tcm_qla2xx, vhost and iser-target.

Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

target: Update copyright information to 2012

v2: Use correct target_core_stat.c 2006 copyright year
v3: Drop extra unnessary legal verbage from header (hch)

Cc: Christoph Hellwig <hch@lst.de>
Signe

target: Update copyright information to 2012

v2: Use correct target_core_stat.c 2006 copyright year
v3: Drop extra unnessary legal verbage from header (hch)

Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

target: Fix minor spelling typos in drivers/target

Correct spelling typo in printk and comment within drivers/target.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Nicholas Be

target: Fix minor spelling typos in drivers/target

Correct spelling typo in printk and comment within drivers/target.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

target: remove useless casts

A reader should spend an extra moment whenever noticing a cast,
because either something special is going on that deserves extra
attention or, as is all too often the ca

target: remove useless casts

A reader should spend an extra moment whenever noticing a cast,
because either something special is going on that deserves extra
attention or, as is all too often the case, the code is wrong.

These casts, afaics, have all been useless. They cast a foo* to a
foo*, cast a void* to the assigned type, cast a foo* to void*, before
assigning it to a void* variable, etc.

In a few cases I also removed an additional &...[0], which is equally
useless.

Lastly I added three FIXMEs where, to the best of my judgement, the
code appears to have a bug. It would be good if someone could check
these.

Signed-off-by: Joern Engel <joern@logfs.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

target: header reshuffle, part2

This reorganized the headers under include/target into:

- target_core_base.h stays as is with all target-wide data stuctures and defines
- target_core_backend.h co

target: header reshuffle, part2

This reorganized the headers under include/target into:

- target_core_base.h stays as is with all target-wide data stuctures and defines
- target_core_backend.h contains the whole interface to I/O backends
- target_core_fabric.h contains the whole interface to fabric modules

Except for those only the various configfs macro headers stay around.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

target: reshuffle headers

Create a new headers, drivers/target/target_core_internal.h that is supposed
to hold all target_core-internal prototypes. Move all non-exported includes
from include/targe

target: reshuffle headers

Create a new headers, drivers/target/target_core_internal.h that is supposed
to hold all target_core-internal prototypes. Move all non-exported includes
from include/target to it, and merge the smaller prototype-only includes
inside drivers/target into it as well. Mark functions that were found to
not be called outside their implementation file static.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

drivers/target: Add export.h to files as required.

So that they have access to EXPORT_SYMBOL variants and THIS_MODULE.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

target: check hex2bin result

Now that hex2bin does error checking, on error add debugging error msg.

Changelog v1 (update):
- fixed definition of 'ret'
- hex2bin now returns an int

Signed-off-by:

target: check hex2bin result

Now that hex2bin does error checking, on error add debugging error msg.

Changelog v1 (update):
- fixed definition of 'ret'
- hex2bin now returns an int

Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>

show more ...

target: remove custom hex2bin() implementation

This patch drops transport_asciihex_to_binaryhex() in favor of proper
hex2bin usage from include/linux/kernel.h:hex2bin()

Signed-off-by: Andy Shevchen

target: remove custom hex2bin() implementation

This patch drops transport_asciihex_to_binaryhex() in favor of proper
hex2bin usage from include/linux/kernel.h:hex2bin()

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...