1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Support for GalaxyCore GC0310 VGA camera sensor. 4 * 5 * Copyright (c) 2013 Intel Corporation. All Rights Reserved. 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License version 9 * 2 as published by the Free Software Foundation. 10 * 11 * This program is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 14 * GNU General Public License for more details. 15 * 16 */ 17 18 #include <linux/module.h> 19 #include <linux/types.h> 20 #include <linux/kernel.h> 21 #include <linux/mm.h> 22 #include <linux/string.h> 23 #include <linux/errno.h> 24 #include <linux/init.h> 25 #include <linux/kmod.h> 26 #include <linux/device.h> 27 #include <linux/delay.h> 28 #include <linux/slab.h> 29 #include <linux/i2c.h> 30 #include <linux/moduleparam.h> 31 #include <media/v4l2-device.h> 32 #include <linux/io.h> 33 #include "../include/linux/atomisp_gmin_platform.h" 34 35 #include "gc0310.h" 36 37 /* i2c read/write stuff */ 38 static int gc0310_read_reg(struct i2c_client *client, 39 u16 data_length, u8 reg, u8 *val) 40 { 41 int err; 42 struct i2c_msg msg[2]; 43 unsigned char data[1]; 44 45 if (!client->adapter) { 46 dev_err(&client->dev, "%s error, no client->adapter\n", 47 __func__); 48 return -ENODEV; 49 } 50 51 if (data_length != GC0310_8BIT) { 52 dev_err(&client->dev, "%s error, invalid data length\n", 53 __func__); 54 return -EINVAL; 55 } 56 57 memset(msg, 0, sizeof(msg)); 58 59 msg[0].addr = client->addr; 60 msg[0].flags = 0; 61 msg[0].len = I2C_MSG_LENGTH; 62 msg[0].buf = data; 63 64 /* high byte goes out first */ 65 data[0] = (u8)(reg & 0xff); 66 67 msg[1].addr = client->addr; 68 msg[1].len = data_length; 69 msg[1].flags = I2C_M_RD; 70 msg[1].buf = data; 71 72 err = i2c_transfer(client->adapter, msg, 2); 73 if (err != 2) { 74 if (err >= 0) 75 err = -EIO; 76 dev_err(&client->dev, 77 "read from offset 0x%x error %d", reg, err); 78 return err; 79 } 80 81 *val = 0; 82 /* high byte comes first */ 83 if (data_length == GC0310_8BIT) 84 *val = (u8)data[0]; 85 86 return 0; 87 } 88 89 static int gc0310_i2c_write(struct i2c_client *client, u16 len, u8 *data) 90 { 91 struct i2c_msg msg; 92 const int num_msg = 1; 93 int ret; 94 95 msg.addr = client->addr; 96 msg.flags = 0; 97 msg.len = len; 98 msg.buf = data; 99 ret = i2c_transfer(client->adapter, &msg, 1); 100 101 return ret == num_msg ? 0 : -EIO; 102 } 103 104 static int gc0310_write_reg(struct i2c_client *client, u16 data_length, 105 u8 reg, u8 val) 106 { 107 int ret; 108 unsigned char data[2] = {0}; 109 u8 *wreg = (u8 *)data; 110 const u16 len = data_length + sizeof(u8); /* 8-bit address + data */ 111 112 if (data_length != GC0310_8BIT) { 113 dev_err(&client->dev, 114 "%s error, invalid data_length\n", __func__); 115 return -EINVAL; 116 } 117 118 /* high byte goes out first */ 119 *wreg = (u8)(reg & 0xff); 120 121 if (data_length == GC0310_8BIT) 122 data[1] = (u8)(val); 123 124 ret = gc0310_i2c_write(client, len, data); 125 if (ret) 126 dev_err(&client->dev, 127 "write error: wrote 0x%x to offset 0x%x error %d", 128 val, reg, ret); 129 130 return ret; 131 } 132 133 /* 134 * gc0310_write_reg_array - Initializes a list of GC0310 registers 135 * @client: i2c driver client structure 136 * @reglist: list of registers to be written 137 * 138 * This function initializes a list of registers. When consecutive addresses 139 * are found in a row on the list, this function creates a buffer and sends 140 * consecutive data in a single i2c_transfer(). 141 * 142 * __gc0310_flush_reg_array, __gc0310_buf_reg_array() and 143 * __gc0310_write_reg_is_consecutive() are internal functions to 144 * gc0310_write_reg_array_fast() and should be not used anywhere else. 145 * 146 */ 147 148 static int __gc0310_flush_reg_array(struct i2c_client *client, 149 struct gc0310_write_ctrl *ctrl) 150 { 151 u16 size; 152 153 if (ctrl->index == 0) 154 return 0; 155 156 size = sizeof(u8) + ctrl->index; /* 8-bit address + data */ 157 ctrl->buffer.addr = (u8)(ctrl->buffer.addr); 158 ctrl->index = 0; 159 160 return gc0310_i2c_write(client, size, (u8 *)&ctrl->buffer); 161 } 162 163 static int __gc0310_buf_reg_array(struct i2c_client *client, 164 struct gc0310_write_ctrl *ctrl, 165 const struct gc0310_reg *next) 166 { 167 int size; 168 169 switch (next->type) { 170 case GC0310_8BIT: 171 size = 1; 172 ctrl->buffer.data[ctrl->index] = (u8)next->val; 173 break; 174 default: 175 return -EINVAL; 176 } 177 178 /* When first item is added, we need to store its starting address */ 179 if (ctrl->index == 0) 180 ctrl->buffer.addr = next->reg; 181 182 ctrl->index += size; 183 184 /* 185 * Buffer cannot guarantee free space for u32? Better flush it to avoid 186 * possible lack of memory for next item. 187 */ 188 if (ctrl->index + sizeof(u8) >= GC0310_MAX_WRITE_BUF_SIZE) 189 return __gc0310_flush_reg_array(client, ctrl); 190 191 return 0; 192 } 193 194 static int __gc0310_write_reg_is_consecutive(struct i2c_client *client, 195 struct gc0310_write_ctrl *ctrl, 196 const struct gc0310_reg *next) 197 { 198 if (ctrl->index == 0) 199 return 1; 200 201 return ctrl->buffer.addr + ctrl->index == next->reg; 202 } 203 204 static int gc0310_write_reg_array(struct i2c_client *client, 205 const struct gc0310_reg *reglist) 206 { 207 const struct gc0310_reg *next = reglist; 208 struct gc0310_write_ctrl ctrl; 209 int err; 210 211 ctrl.index = 0; 212 for (; next->type != GC0310_TOK_TERM; next++) { 213 switch (next->type & GC0310_TOK_MASK) { 214 case GC0310_TOK_DELAY: 215 err = __gc0310_flush_reg_array(client, &ctrl); 216 if (err) 217 return err; 218 msleep(next->val); 219 break; 220 default: 221 /* 222 * If next address is not consecutive, data needs to be 223 * flushed before proceed. 224 */ 225 if (!__gc0310_write_reg_is_consecutive(client, &ctrl, 226 next)) { 227 err = __gc0310_flush_reg_array(client, &ctrl); 228 if (err) 229 return err; 230 } 231 err = __gc0310_buf_reg_array(client, &ctrl, next); 232 if (err) { 233 dev_err(&client->dev, "%s: write error, aborted\n", 234 __func__); 235 return err; 236 } 237 break; 238 } 239 } 240 241 return __gc0310_flush_reg_array(client, &ctrl); 242 } 243 244 static int gc0310_g_focal(struct v4l2_subdev *sd, s32 *val) 245 { 246 *val = (GC0310_FOCAL_LENGTH_NUM << 16) | GC0310_FOCAL_LENGTH_DEM; 247 return 0; 248 } 249 250 static int gc0310_g_fnumber(struct v4l2_subdev *sd, s32 *val) 251 { 252 /*const f number for imx*/ 253 *val = (GC0310_F_NUMBER_DEFAULT_NUM << 16) | GC0310_F_NUMBER_DEM; 254 return 0; 255 } 256 257 static int gc0310_g_fnumber_range(struct v4l2_subdev *sd, s32 *val) 258 { 259 *val = (GC0310_F_NUMBER_DEFAULT_NUM << 24) | 260 (GC0310_F_NUMBER_DEM << 16) | 261 (GC0310_F_NUMBER_DEFAULT_NUM << 8) | GC0310_F_NUMBER_DEM; 262 return 0; 263 } 264 265 static int gc0310_g_bin_factor_x(struct v4l2_subdev *sd, s32 *val) 266 { 267 struct gc0310_device *dev = to_gc0310_sensor(sd); 268 269 *val = gc0310_res[dev->fmt_idx].bin_factor_x; 270 271 return 0; 272 } 273 274 static int gc0310_g_bin_factor_y(struct v4l2_subdev *sd, s32 *val) 275 { 276 struct gc0310_device *dev = to_gc0310_sensor(sd); 277 278 *val = gc0310_res[dev->fmt_idx].bin_factor_y; 279 280 return 0; 281 } 282 283 static int gc0310_get_intg_factor(struct i2c_client *client, 284 struct camera_mipi_info *info, 285 const struct gc0310_resolution *res) 286 { 287 struct v4l2_subdev *sd = i2c_get_clientdata(client); 288 struct gc0310_device *dev = to_gc0310_sensor(sd); 289 struct atomisp_sensor_mode_data *buf = &info->data; 290 u16 val; 291 u8 reg_val; 292 int ret; 293 unsigned int hori_blanking; 294 unsigned int vert_blanking; 295 unsigned int sh_delay; 296 297 if (!info) 298 return -EINVAL; 299 300 /* pixel clock calculattion */ 301 dev->vt_pix_clk_freq_mhz = 14400000; // 16.8MHz 302 buf->vt_pix_clk_freq_mhz = dev->vt_pix_clk_freq_mhz; 303 dev_dbg(&client->dev, "vt_pix_clk_freq_mhz=%d\n", buf->vt_pix_clk_freq_mhz); 304 305 /* get integration time */ 306 buf->coarse_integration_time_min = GC0310_COARSE_INTG_TIME_MIN; 307 buf->coarse_integration_time_max_margin = 308 GC0310_COARSE_INTG_TIME_MAX_MARGIN; 309 310 buf->fine_integration_time_min = GC0310_FINE_INTG_TIME_MIN; 311 buf->fine_integration_time_max_margin = 312 GC0310_FINE_INTG_TIME_MAX_MARGIN; 313 314 buf->fine_integration_time_def = GC0310_FINE_INTG_TIME_MIN; 315 buf->read_mode = res->bin_mode; 316 317 /* get the cropping and output resolution to ISP for this mode. */ 318 /* Getting crop_horizontal_start */ 319 ret = gc0310_read_reg(client, GC0310_8BIT, 320 GC0310_H_CROP_START_H, ®_val); 321 if (ret) 322 return ret; 323 val = (reg_val & 0xFF) << 8; 324 ret = gc0310_read_reg(client, GC0310_8BIT, 325 GC0310_H_CROP_START_L, ®_val); 326 if (ret) 327 return ret; 328 buf->crop_horizontal_start = val | (reg_val & 0xFF); 329 dev_dbg(&client->dev, "crop_horizontal_start=%d\n", buf->crop_horizontal_start); 330 331 /* Getting crop_vertical_start */ 332 ret = gc0310_read_reg(client, GC0310_8BIT, 333 GC0310_V_CROP_START_H, ®_val); 334 if (ret) 335 return ret; 336 val = (reg_val & 0xFF) << 8; 337 ret = gc0310_read_reg(client, GC0310_8BIT, 338 GC0310_V_CROP_START_L, ®_val); 339 if (ret) 340 return ret; 341 buf->crop_vertical_start = val | (reg_val & 0xFF); 342 dev_dbg(&client->dev, "crop_vertical_start=%d\n", buf->crop_vertical_start); 343 344 /* Getting output_width */ 345 ret = gc0310_read_reg(client, GC0310_8BIT, 346 GC0310_H_OUTSIZE_H, ®_val); 347 if (ret) 348 return ret; 349 val = (reg_val & 0xFF) << 8; 350 ret = gc0310_read_reg(client, GC0310_8BIT, 351 GC0310_H_OUTSIZE_L, ®_val); 352 if (ret) 353 return ret; 354 buf->output_width = val | (reg_val & 0xFF); 355 dev_dbg(&client->dev, "output_width=%d\n", buf->output_width); 356 357 /* Getting output_height */ 358 ret = gc0310_read_reg(client, GC0310_8BIT, 359 GC0310_V_OUTSIZE_H, ®_val); 360 if (ret) 361 return ret; 362 val = (reg_val & 0xFF) << 8; 363 ret = gc0310_read_reg(client, GC0310_8BIT, 364 GC0310_V_OUTSIZE_L, ®_val); 365 if (ret) 366 return ret; 367 buf->output_height = val | (reg_val & 0xFF); 368 dev_dbg(&client->dev, "output_height=%d\n", buf->output_height); 369 370 buf->crop_horizontal_end = buf->crop_horizontal_start + buf->output_width - 1; 371 buf->crop_vertical_end = buf->crop_vertical_start + buf->output_height - 1; 372 dev_dbg(&client->dev, "crop_horizontal_end=%d\n", buf->crop_horizontal_end); 373 dev_dbg(&client->dev, "crop_vertical_end=%d\n", buf->crop_vertical_end); 374 375 /* Getting line_length_pck */ 376 ret = gc0310_read_reg(client, GC0310_8BIT, 377 GC0310_H_BLANKING_H, ®_val); 378 if (ret) 379 return ret; 380 val = (reg_val & 0xFF) << 8; 381 ret = gc0310_read_reg(client, GC0310_8BIT, 382 GC0310_H_BLANKING_L, ®_val); 383 if (ret) 384 return ret; 385 hori_blanking = val | (reg_val & 0xFF); 386 ret = gc0310_read_reg(client, GC0310_8BIT, 387 GC0310_SH_DELAY, ®_val); 388 if (ret) 389 return ret; 390 sh_delay = reg_val; 391 buf->line_length_pck = buf->output_width + hori_blanking + sh_delay + 4; 392 dev_dbg(&client->dev, "hori_blanking=%d sh_delay=%d line_length_pck=%d\n", hori_blanking, 393 sh_delay, buf->line_length_pck); 394 395 /* Getting frame_length_lines */ 396 ret = gc0310_read_reg(client, GC0310_8BIT, 397 GC0310_V_BLANKING_H, ®_val); 398 if (ret) 399 return ret; 400 val = (reg_val & 0xFF) << 8; 401 ret = gc0310_read_reg(client, GC0310_8BIT, 402 GC0310_V_BLANKING_L, ®_val); 403 if (ret) 404 return ret; 405 vert_blanking = val | (reg_val & 0xFF); 406 buf->frame_length_lines = buf->output_height + vert_blanking; 407 dev_dbg(&client->dev, "vert_blanking=%d frame_length_lines=%d\n", vert_blanking, 408 buf->frame_length_lines); 409 410 buf->binning_factor_x = res->bin_factor_x ? 411 res->bin_factor_x : 1; 412 buf->binning_factor_y = res->bin_factor_y ? 413 res->bin_factor_y : 1; 414 return 0; 415 } 416 417 static int gc0310_set_gain(struct v4l2_subdev *sd, int gain) 418 419 { 420 struct i2c_client *client = v4l2_get_subdevdata(sd); 421 int ret; 422 u8 again, dgain; 423 424 if (gain < 0x20) 425 gain = 0x20; 426 if (gain > 0x80) 427 gain = 0x80; 428 429 if (gain >= 0x20 && gain < 0x40) { 430 again = 0x0; /* sqrt(2) */ 431 dgain = gain; 432 } else { 433 again = 0x2; /* 2 * sqrt(2) */ 434 dgain = gain / 2; 435 } 436 437 dev_dbg(&client->dev, "gain=0x%x again=0x%x dgain=0x%x\n", gain, again, dgain); 438 439 /* set analog gain */ 440 ret = gc0310_write_reg(client, GC0310_8BIT, 441 GC0310_AGC_ADJ, again); 442 if (ret) 443 return ret; 444 445 /* set digital gain */ 446 ret = gc0310_write_reg(client, GC0310_8BIT, 447 GC0310_DGC_ADJ, dgain); 448 if (ret) 449 return ret; 450 451 return 0; 452 } 453 454 static int __gc0310_set_exposure(struct v4l2_subdev *sd, int coarse_itg, 455 int gain, int digitgain) 456 457 { 458 struct i2c_client *client = v4l2_get_subdevdata(sd); 459 int ret; 460 461 dev_dbg(&client->dev, "coarse_itg=%d gain=%d digitgain=%d\n", coarse_itg, gain, digitgain); 462 463 /* set exposure */ 464 ret = gc0310_write_reg(client, GC0310_8BIT, 465 GC0310_AEC_PK_EXPO_L, 466 coarse_itg & 0xff); 467 if (ret) 468 return ret; 469 470 ret = gc0310_write_reg(client, GC0310_8BIT, 471 GC0310_AEC_PK_EXPO_H, 472 (coarse_itg >> 8) & 0x0f); 473 if (ret) 474 return ret; 475 476 ret = gc0310_set_gain(sd, gain); 477 if (ret) 478 return ret; 479 480 return ret; 481 } 482 483 static int gc0310_set_exposure(struct v4l2_subdev *sd, int exposure, 484 int gain, int digitgain) 485 { 486 struct gc0310_device *dev = to_gc0310_sensor(sd); 487 int ret; 488 489 mutex_lock(&dev->input_lock); 490 ret = __gc0310_set_exposure(sd, exposure, gain, digitgain); 491 mutex_unlock(&dev->input_lock); 492 493 return ret; 494 } 495 496 static long gc0310_s_exposure(struct v4l2_subdev *sd, 497 struct atomisp_exposure *exposure) 498 { 499 int exp = exposure->integration_time[0]; 500 int gain = exposure->gain[0]; 501 int digitgain = exposure->gain[1]; 502 503 /* we should not accept the invalid value below. */ 504 if (gain == 0) { 505 struct i2c_client *client = v4l2_get_subdevdata(sd); 506 507 v4l2_err(client, "%s: invalid value\n", __func__); 508 return -EINVAL; 509 } 510 511 return gc0310_set_exposure(sd, exp, gain, digitgain); 512 } 513 514 /* TO DO */ 515 static int gc0310_v_flip(struct v4l2_subdev *sd, s32 value) 516 { 517 return 0; 518 } 519 520 /* TO DO */ 521 static int gc0310_h_flip(struct v4l2_subdev *sd, s32 value) 522 { 523 return 0; 524 } 525 526 static long gc0310_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg) 527 { 528 switch (cmd) { 529 case ATOMISP_IOC_S_EXPOSURE: 530 return gc0310_s_exposure(sd, arg); 531 default: 532 return -EINVAL; 533 } 534 return 0; 535 } 536 537 /* This returns the exposure time being used. This should only be used 538 * for filling in EXIF data, not for actual image processing. 539 */ 540 static int gc0310_q_exposure(struct v4l2_subdev *sd, s32 *value) 541 { 542 struct i2c_client *client = v4l2_get_subdevdata(sd); 543 u8 reg_v; 544 int ret; 545 546 /* get exposure */ 547 ret = gc0310_read_reg(client, GC0310_8BIT, 548 GC0310_AEC_PK_EXPO_L, 549 ®_v); 550 if (ret) 551 goto err; 552 553 *value = reg_v; 554 ret = gc0310_read_reg(client, GC0310_8BIT, 555 GC0310_AEC_PK_EXPO_H, 556 ®_v); 557 if (ret) 558 goto err; 559 560 *value = *value + (reg_v << 8); 561 err: 562 return ret; 563 } 564 565 static int gc0310_s_ctrl(struct v4l2_ctrl *ctrl) 566 { 567 struct gc0310_device *dev = 568 container_of(ctrl->handler, struct gc0310_device, ctrl_handler); 569 struct i2c_client *client = v4l2_get_subdevdata(&dev->sd); 570 int ret = 0; 571 572 switch (ctrl->id) { 573 case V4L2_CID_VFLIP: 574 dev_dbg(&client->dev, "%s: CID_VFLIP:%d.\n", 575 __func__, ctrl->val); 576 ret = gc0310_v_flip(&dev->sd, ctrl->val); 577 break; 578 case V4L2_CID_HFLIP: 579 dev_dbg(&client->dev, "%s: CID_HFLIP:%d.\n", 580 __func__, ctrl->val); 581 ret = gc0310_h_flip(&dev->sd, ctrl->val); 582 break; 583 default: 584 ret = -EINVAL; 585 } 586 return ret; 587 } 588 589 static int gc0310_g_volatile_ctrl(struct v4l2_ctrl *ctrl) 590 { 591 struct gc0310_device *dev = 592 container_of(ctrl->handler, struct gc0310_device, ctrl_handler); 593 int ret = 0; 594 595 switch (ctrl->id) { 596 case V4L2_CID_EXPOSURE_ABSOLUTE: 597 ret = gc0310_q_exposure(&dev->sd, &ctrl->val); 598 break; 599 case V4L2_CID_FOCAL_ABSOLUTE: 600 ret = gc0310_g_focal(&dev->sd, &ctrl->val); 601 break; 602 case V4L2_CID_FNUMBER_ABSOLUTE: 603 ret = gc0310_g_fnumber(&dev->sd, &ctrl->val); 604 break; 605 case V4L2_CID_FNUMBER_RANGE: 606 ret = gc0310_g_fnumber_range(&dev->sd, &ctrl->val); 607 break; 608 case V4L2_CID_BIN_FACTOR_HORZ: 609 ret = gc0310_g_bin_factor_x(&dev->sd, &ctrl->val); 610 break; 611 case V4L2_CID_BIN_FACTOR_VERT: 612 ret = gc0310_g_bin_factor_y(&dev->sd, &ctrl->val); 613 break; 614 default: 615 ret = -EINVAL; 616 } 617 618 return ret; 619 } 620 621 static const struct v4l2_ctrl_ops ctrl_ops = { 622 .s_ctrl = gc0310_s_ctrl, 623 .g_volatile_ctrl = gc0310_g_volatile_ctrl 624 }; 625 626 static const struct v4l2_ctrl_config gc0310_controls[] = { 627 { 628 .ops = &ctrl_ops, 629 .id = V4L2_CID_EXPOSURE_ABSOLUTE, 630 .type = V4L2_CTRL_TYPE_INTEGER, 631 .name = "exposure", 632 .min = 0x0, 633 .max = 0xffff, 634 .step = 0x01, 635 .def = 0x00, 636 .flags = 0, 637 }, 638 { 639 .ops = &ctrl_ops, 640 .id = V4L2_CID_VFLIP, 641 .type = V4L2_CTRL_TYPE_BOOLEAN, 642 .name = "Flip", 643 .min = 0, 644 .max = 1, 645 .step = 1, 646 .def = 0, 647 }, 648 { 649 .ops = &ctrl_ops, 650 .id = V4L2_CID_HFLIP, 651 .type = V4L2_CTRL_TYPE_BOOLEAN, 652 .name = "Mirror", 653 .min = 0, 654 .max = 1, 655 .step = 1, 656 .def = 0, 657 }, 658 { 659 .ops = &ctrl_ops, 660 .id = V4L2_CID_FOCAL_ABSOLUTE, 661 .type = V4L2_CTRL_TYPE_INTEGER, 662 .name = "focal length", 663 .min = GC0310_FOCAL_LENGTH_DEFAULT, 664 .max = GC0310_FOCAL_LENGTH_DEFAULT, 665 .step = 0x01, 666 .def = GC0310_FOCAL_LENGTH_DEFAULT, 667 .flags = 0, 668 }, 669 { 670 .ops = &ctrl_ops, 671 .id = V4L2_CID_FNUMBER_ABSOLUTE, 672 .type = V4L2_CTRL_TYPE_INTEGER, 673 .name = "f-number", 674 .min = GC0310_F_NUMBER_DEFAULT, 675 .max = GC0310_F_NUMBER_DEFAULT, 676 .step = 0x01, 677 .def = GC0310_F_NUMBER_DEFAULT, 678 .flags = 0, 679 }, 680 { 681 .ops = &ctrl_ops, 682 .id = V4L2_CID_FNUMBER_RANGE, 683 .type = V4L2_CTRL_TYPE_INTEGER, 684 .name = "f-number range", 685 .min = GC0310_F_NUMBER_RANGE, 686 .max = GC0310_F_NUMBER_RANGE, 687 .step = 0x01, 688 .def = GC0310_F_NUMBER_RANGE, 689 .flags = 0, 690 }, 691 { 692 .ops = &ctrl_ops, 693 .id = V4L2_CID_BIN_FACTOR_HORZ, 694 .type = V4L2_CTRL_TYPE_INTEGER, 695 .name = "horizontal binning factor", 696 .min = 0, 697 .max = GC0310_BIN_FACTOR_MAX, 698 .step = 1, 699 .def = 0, 700 .flags = 0, 701 }, 702 { 703 .ops = &ctrl_ops, 704 .id = V4L2_CID_BIN_FACTOR_VERT, 705 .type = V4L2_CTRL_TYPE_INTEGER, 706 .name = "vertical binning factor", 707 .min = 0, 708 .max = GC0310_BIN_FACTOR_MAX, 709 .step = 1, 710 .def = 0, 711 .flags = 0, 712 }, 713 }; 714 715 static int gc0310_init(struct v4l2_subdev *sd) 716 { 717 int ret; 718 struct i2c_client *client = v4l2_get_subdevdata(sd); 719 struct gc0310_device *dev = to_gc0310_sensor(sd); 720 721 mutex_lock(&dev->input_lock); 722 723 /* set initial registers */ 724 ret = gc0310_write_reg_array(client, gc0310_reset_register); 725 726 /* restore settings */ 727 gc0310_res = gc0310_res_preview; 728 N_RES = N_RES_PREVIEW; 729 730 mutex_unlock(&dev->input_lock); 731 732 return ret; 733 } 734 735 static int power_ctrl(struct v4l2_subdev *sd, bool flag) 736 { 737 int ret = 0; 738 struct gc0310_device *dev = to_gc0310_sensor(sd); 739 740 if (!dev || !dev->platform_data) 741 return -ENODEV; 742 743 if (flag) { 744 /* The upstream module driver (written to Crystal 745 * Cove) had this logic to pulse the rails low first. 746 * This appears to break things on the MRD7 with the 747 * X-Powers PMIC... 748 * 749 * ret = dev->platform_data->v1p8_ctrl(sd, 0); 750 * ret |= dev->platform_data->v2p8_ctrl(sd, 0); 751 * mdelay(50); 752 */ 753 ret |= dev->platform_data->v1p8_ctrl(sd, 1); 754 ret |= dev->platform_data->v2p8_ctrl(sd, 1); 755 usleep_range(10000, 15000); 756 } 757 758 if (!flag || ret) { 759 ret |= dev->platform_data->v1p8_ctrl(sd, 0); 760 ret |= dev->platform_data->v2p8_ctrl(sd, 0); 761 } 762 return ret; 763 } 764 765 static int gpio_ctrl(struct v4l2_subdev *sd, bool flag) 766 { 767 int ret; 768 struct gc0310_device *dev = to_gc0310_sensor(sd); 769 770 if (!dev || !dev->platform_data) 771 return -ENODEV; 772 773 /* GPIO0 == "reset" (active low), GPIO1 == "power down" */ 774 if (flag) { 775 /* Pulse reset, then release power down */ 776 ret = dev->platform_data->gpio0_ctrl(sd, 0); 777 usleep_range(5000, 10000); 778 ret |= dev->platform_data->gpio0_ctrl(sd, 1); 779 usleep_range(10000, 15000); 780 ret |= dev->platform_data->gpio1_ctrl(sd, 0); 781 usleep_range(10000, 15000); 782 } else { 783 ret = dev->platform_data->gpio1_ctrl(sd, 1); 784 ret |= dev->platform_data->gpio0_ctrl(sd, 0); 785 } 786 return ret; 787 } 788 789 static int power_down(struct v4l2_subdev *sd); 790 791 static int power_up(struct v4l2_subdev *sd) 792 { 793 struct gc0310_device *dev = to_gc0310_sensor(sd); 794 struct i2c_client *client = v4l2_get_subdevdata(sd); 795 int ret; 796 797 if (!dev->platform_data) { 798 dev_err(&client->dev, 799 "no camera_sensor_platform_data"); 800 return -ENODEV; 801 } 802 803 /* power control */ 804 ret = power_ctrl(sd, 1); 805 if (ret) 806 goto fail_power; 807 808 /* flis clock control */ 809 ret = dev->platform_data->flisclk_ctrl(sd, 1); 810 if (ret) 811 goto fail_clk; 812 813 /* gpio ctrl */ 814 ret = gpio_ctrl(sd, 1); 815 if (ret) { 816 ret = gpio_ctrl(sd, 1); 817 if (ret) 818 goto fail_gpio; 819 } 820 821 msleep(100); 822 823 return 0; 824 825 fail_gpio: 826 dev->platform_data->flisclk_ctrl(sd, 0); 827 fail_clk: 828 power_ctrl(sd, 0); 829 fail_power: 830 dev_err(&client->dev, "sensor power-up failed\n"); 831 832 return ret; 833 } 834 835 static int power_down(struct v4l2_subdev *sd) 836 { 837 struct gc0310_device *dev = to_gc0310_sensor(sd); 838 struct i2c_client *client = v4l2_get_subdevdata(sd); 839 int ret = 0; 840 841 if (!dev->platform_data) { 842 dev_err(&client->dev, 843 "no camera_sensor_platform_data"); 844 return -ENODEV; 845 } 846 847 /* gpio ctrl */ 848 ret = gpio_ctrl(sd, 0); 849 if (ret) { 850 ret = gpio_ctrl(sd, 0); 851 if (ret) 852 dev_err(&client->dev, "gpio failed 2\n"); 853 } 854 855 ret = dev->platform_data->flisclk_ctrl(sd, 0); 856 if (ret) 857 dev_err(&client->dev, "flisclk failed\n"); 858 859 /* power control */ 860 ret = power_ctrl(sd, 0); 861 if (ret) 862 dev_err(&client->dev, "vprog failed.\n"); 863 864 return ret; 865 } 866 867 static int gc0310_s_power(struct v4l2_subdev *sd, int on) 868 { 869 int ret; 870 871 if (on == 0) 872 return power_down(sd); 873 874 ret = power_up(sd); 875 if (ret) 876 return ret; 877 878 return gc0310_init(sd); 879 } 880 881 /* 882 * distance - calculate the distance 883 * @res: resolution 884 * @w: width 885 * @h: height 886 * 887 * Get the gap between resolution and w/h. 888 * res->width/height smaller than w/h wouldn't be considered. 889 * Returns the value of gap or -1 if fail. 890 */ 891 #define LARGEST_ALLOWED_RATIO_MISMATCH 800 892 static int distance(struct gc0310_resolution *res, u32 w, u32 h) 893 { 894 unsigned int w_ratio = (res->width << 13) / w; 895 unsigned int h_ratio; 896 int match; 897 898 if (h == 0) 899 return -1; 900 h_ratio = (res->height << 13) / h; 901 if (h_ratio == 0) 902 return -1; 903 match = abs(((w_ratio << 13) / h_ratio) - 8192); 904 905 if ((w_ratio < 8192) || (h_ratio < 8192) || 906 (match > LARGEST_ALLOWED_RATIO_MISMATCH)) 907 return -1; 908 909 return w_ratio + h_ratio; 910 } 911 912 /* Return the nearest higher resolution index */ 913 static int nearest_resolution_index(int w, int h) 914 { 915 int i; 916 int idx = -1; 917 int dist; 918 int min_dist = INT_MAX; 919 struct gc0310_resolution *tmp_res = NULL; 920 921 for (i = 0; i < N_RES; i++) { 922 tmp_res = &gc0310_res[i]; 923 dist = distance(tmp_res, w, h); 924 if (dist == -1) 925 continue; 926 if (dist < min_dist) { 927 min_dist = dist; 928 idx = i; 929 } 930 } 931 932 return idx; 933 } 934 935 static int get_resolution_index(int w, int h) 936 { 937 int i; 938 939 for (i = 0; i < N_RES; i++) { 940 if (w != gc0310_res[i].width) 941 continue; 942 if (h != gc0310_res[i].height) 943 continue; 944 945 return i; 946 } 947 948 return -1; 949 } 950 951 /* TODO: remove it. */ 952 static int startup(struct v4l2_subdev *sd) 953 { 954 struct gc0310_device *dev = to_gc0310_sensor(sd); 955 struct i2c_client *client = v4l2_get_subdevdata(sd); 956 int ret = 0; 957 958 ret = gc0310_write_reg_array(client, gc0310_res[dev->fmt_idx].regs); 959 if (ret) { 960 dev_err(&client->dev, "gc0310 write register err.\n"); 961 return ret; 962 } 963 964 return ret; 965 } 966 967 static int gc0310_set_fmt(struct v4l2_subdev *sd, 968 struct v4l2_subdev_state *sd_state, 969 struct v4l2_subdev_format *format) 970 { 971 struct v4l2_mbus_framefmt *fmt = &format->format; 972 struct gc0310_device *dev = to_gc0310_sensor(sd); 973 struct i2c_client *client = v4l2_get_subdevdata(sd); 974 struct camera_mipi_info *gc0310_info = NULL; 975 int ret = 0; 976 int idx = 0; 977 978 if (format->pad) 979 return -EINVAL; 980 981 if (!fmt) 982 return -EINVAL; 983 984 gc0310_info = v4l2_get_subdev_hostdata(sd); 985 if (!gc0310_info) 986 return -EINVAL; 987 988 mutex_lock(&dev->input_lock); 989 990 idx = nearest_resolution_index(fmt->width, fmt->height); 991 if (idx == -1) { 992 /* return the largest resolution */ 993 fmt->width = gc0310_res[N_RES - 1].width; 994 fmt->height = gc0310_res[N_RES - 1].height; 995 } else { 996 fmt->width = gc0310_res[idx].width; 997 fmt->height = gc0310_res[idx].height; 998 } 999 fmt->code = MEDIA_BUS_FMT_SGRBG8_1X8; 1000 1001 if (format->which == V4L2_SUBDEV_FORMAT_TRY) { 1002 sd_state->pads->try_fmt = *fmt; 1003 mutex_unlock(&dev->input_lock); 1004 return 0; 1005 } 1006 1007 dev->fmt_idx = get_resolution_index(fmt->width, fmt->height); 1008 if (dev->fmt_idx == -1) { 1009 dev_err(&client->dev, "get resolution fail\n"); 1010 mutex_unlock(&dev->input_lock); 1011 return -EINVAL; 1012 } 1013 1014 dev_dbg(&client->dev, "%s: before gc0310_write_reg_array %s\n", 1015 __func__, gc0310_res[dev->fmt_idx].desc); 1016 ret = startup(sd); 1017 if (ret) { 1018 dev_err(&client->dev, "gc0310 startup err\n"); 1019 goto err; 1020 } 1021 1022 ret = gc0310_get_intg_factor(client, gc0310_info, 1023 &gc0310_res[dev->fmt_idx]); 1024 if (ret) { 1025 dev_err(&client->dev, "failed to get integration_factor\n"); 1026 goto err; 1027 } 1028 1029 err: 1030 mutex_unlock(&dev->input_lock); 1031 return ret; 1032 } 1033 1034 static int gc0310_get_fmt(struct v4l2_subdev *sd, 1035 struct v4l2_subdev_state *sd_state, 1036 struct v4l2_subdev_format *format) 1037 { 1038 struct v4l2_mbus_framefmt *fmt = &format->format; 1039 struct gc0310_device *dev = to_gc0310_sensor(sd); 1040 1041 if (format->pad) 1042 return -EINVAL; 1043 1044 if (!fmt) 1045 return -EINVAL; 1046 1047 fmt->width = gc0310_res[dev->fmt_idx].width; 1048 fmt->height = gc0310_res[dev->fmt_idx].height; 1049 fmt->code = MEDIA_BUS_FMT_SGRBG8_1X8; 1050 1051 return 0; 1052 } 1053 1054 static int gc0310_detect(struct i2c_client *client) 1055 { 1056 struct i2c_adapter *adapter = client->adapter; 1057 u8 high, low; 1058 int ret; 1059 u16 id; 1060 1061 if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) 1062 return -ENODEV; 1063 1064 ret = gc0310_read_reg(client, GC0310_8BIT, 1065 GC0310_SC_CMMN_CHIP_ID_H, &high); 1066 if (ret) { 1067 dev_err(&client->dev, "read sensor_id_high failed\n"); 1068 return -ENODEV; 1069 } 1070 ret = gc0310_read_reg(client, GC0310_8BIT, 1071 GC0310_SC_CMMN_CHIP_ID_L, &low); 1072 if (ret) { 1073 dev_err(&client->dev, "read sensor_id_low failed\n"); 1074 return -ENODEV; 1075 } 1076 id = ((((u16)high) << 8) | (u16)low); 1077 dev_dbg(&client->dev, "sensor ID = 0x%x\n", id); 1078 1079 if (id != GC0310_ID) { 1080 dev_err(&client->dev, "sensor ID error, read id = 0x%x, target id = 0x%x\n", id, 1081 GC0310_ID); 1082 return -ENODEV; 1083 } 1084 1085 dev_dbg(&client->dev, "detect gc0310 success\n"); 1086 1087 return 0; 1088 } 1089 1090 static int gc0310_s_stream(struct v4l2_subdev *sd, int enable) 1091 { 1092 struct gc0310_device *dev = to_gc0310_sensor(sd); 1093 struct i2c_client *client = v4l2_get_subdevdata(sd); 1094 int ret; 1095 1096 dev_dbg(&client->dev, "%s S enable=%d\n", __func__, enable); 1097 mutex_lock(&dev->input_lock); 1098 1099 if (enable) { 1100 /* enable per frame MIPI and sensor ctrl reset */ 1101 ret = gc0310_write_reg(client, GC0310_8BIT, 1102 0xFE, 0x30); 1103 if (ret) { 1104 mutex_unlock(&dev->input_lock); 1105 return ret; 1106 } 1107 } 1108 1109 ret = gc0310_write_reg(client, GC0310_8BIT, 1110 GC0310_RESET_RELATED, GC0310_REGISTER_PAGE_3); 1111 if (ret) { 1112 mutex_unlock(&dev->input_lock); 1113 return ret; 1114 } 1115 1116 ret = gc0310_write_reg(client, GC0310_8BIT, GC0310_SW_STREAM, 1117 enable ? GC0310_START_STREAMING : 1118 GC0310_STOP_STREAMING); 1119 if (ret) { 1120 mutex_unlock(&dev->input_lock); 1121 return ret; 1122 } 1123 1124 ret = gc0310_write_reg(client, GC0310_8BIT, 1125 GC0310_RESET_RELATED, GC0310_REGISTER_PAGE_0); 1126 if (ret) { 1127 mutex_unlock(&dev->input_lock); 1128 return ret; 1129 } 1130 1131 mutex_unlock(&dev->input_lock); 1132 return ret; 1133 } 1134 1135 static int gc0310_s_config(struct v4l2_subdev *sd, 1136 int irq, void *platform_data) 1137 { 1138 struct gc0310_device *dev = to_gc0310_sensor(sd); 1139 struct i2c_client *client = v4l2_get_subdevdata(sd); 1140 int ret = 0; 1141 1142 if (!platform_data) 1143 return -ENODEV; 1144 1145 dev->platform_data = 1146 (struct camera_sensor_platform_data *)platform_data; 1147 1148 mutex_lock(&dev->input_lock); 1149 /* power off the module, then power on it in future 1150 * as first power on by board may not fulfill the 1151 * power on sequqence needed by the module 1152 */ 1153 ret = power_down(sd); 1154 if (ret) { 1155 dev_err(&client->dev, "gc0310 power-off err.\n"); 1156 goto fail_power_off; 1157 } 1158 1159 ret = power_up(sd); 1160 if (ret) { 1161 dev_err(&client->dev, "gc0310 power-up err.\n"); 1162 goto fail_power_on; 1163 } 1164 1165 ret = dev->platform_data->csi_cfg(sd, 1); 1166 if (ret) 1167 goto fail_csi_cfg; 1168 1169 /* config & detect sensor */ 1170 ret = gc0310_detect(client); 1171 if (ret) { 1172 dev_err(&client->dev, "gc0310_detect err s_config.\n"); 1173 goto fail_csi_cfg; 1174 } 1175 1176 /* turn off sensor, after probed */ 1177 ret = power_down(sd); 1178 if (ret) { 1179 dev_err(&client->dev, "gc0310 power-off err.\n"); 1180 goto fail_csi_cfg; 1181 } 1182 mutex_unlock(&dev->input_lock); 1183 1184 return 0; 1185 1186 fail_csi_cfg: 1187 dev->platform_data->csi_cfg(sd, 0); 1188 fail_power_on: 1189 power_down(sd); 1190 dev_err(&client->dev, "sensor power-gating failed\n"); 1191 fail_power_off: 1192 mutex_unlock(&dev->input_lock); 1193 return ret; 1194 } 1195 1196 static int gc0310_g_frame_interval(struct v4l2_subdev *sd, 1197 struct v4l2_subdev_frame_interval *interval) 1198 { 1199 struct gc0310_device *dev = to_gc0310_sensor(sd); 1200 1201 interval->interval.numerator = 1; 1202 interval->interval.denominator = gc0310_res[dev->fmt_idx].fps; 1203 1204 return 0; 1205 } 1206 1207 static int gc0310_enum_mbus_code(struct v4l2_subdev *sd, 1208 struct v4l2_subdev_state *sd_state, 1209 struct v4l2_subdev_mbus_code_enum *code) 1210 { 1211 if (code->index >= MAX_FMTS) 1212 return -EINVAL; 1213 1214 code->code = MEDIA_BUS_FMT_SGRBG8_1X8; 1215 return 0; 1216 } 1217 1218 static int gc0310_enum_frame_size(struct v4l2_subdev *sd, 1219 struct v4l2_subdev_state *sd_state, 1220 struct v4l2_subdev_frame_size_enum *fse) 1221 { 1222 int index = fse->index; 1223 1224 if (index >= N_RES) 1225 return -EINVAL; 1226 1227 fse->min_width = gc0310_res[index].width; 1228 fse->min_height = gc0310_res[index].height; 1229 fse->max_width = gc0310_res[index].width; 1230 fse->max_height = gc0310_res[index].height; 1231 1232 return 0; 1233 } 1234 1235 static int gc0310_g_skip_frames(struct v4l2_subdev *sd, u32 *frames) 1236 { 1237 struct gc0310_device *dev = to_gc0310_sensor(sd); 1238 1239 mutex_lock(&dev->input_lock); 1240 *frames = gc0310_res[dev->fmt_idx].skip_frames; 1241 mutex_unlock(&dev->input_lock); 1242 1243 return 0; 1244 } 1245 1246 static const struct v4l2_subdev_sensor_ops gc0310_sensor_ops = { 1247 .g_skip_frames = gc0310_g_skip_frames, 1248 }; 1249 1250 static const struct v4l2_subdev_video_ops gc0310_video_ops = { 1251 .s_stream = gc0310_s_stream, 1252 .g_frame_interval = gc0310_g_frame_interval, 1253 }; 1254 1255 static const struct v4l2_subdev_core_ops gc0310_core_ops = { 1256 .s_power = gc0310_s_power, 1257 .ioctl = gc0310_ioctl, 1258 }; 1259 1260 static const struct v4l2_subdev_pad_ops gc0310_pad_ops = { 1261 .enum_mbus_code = gc0310_enum_mbus_code, 1262 .enum_frame_size = gc0310_enum_frame_size, 1263 .get_fmt = gc0310_get_fmt, 1264 .set_fmt = gc0310_set_fmt, 1265 }; 1266 1267 static const struct v4l2_subdev_ops gc0310_ops = { 1268 .core = &gc0310_core_ops, 1269 .video = &gc0310_video_ops, 1270 .pad = &gc0310_pad_ops, 1271 .sensor = &gc0310_sensor_ops, 1272 }; 1273 1274 static int gc0310_remove(struct i2c_client *client) 1275 { 1276 struct v4l2_subdev *sd = i2c_get_clientdata(client); 1277 struct gc0310_device *dev = to_gc0310_sensor(sd); 1278 1279 dev_dbg(&client->dev, "gc0310_remove...\n"); 1280 1281 dev->platform_data->csi_cfg(sd, 0); 1282 1283 v4l2_device_unregister_subdev(sd); 1284 media_entity_cleanup(&dev->sd.entity); 1285 v4l2_ctrl_handler_free(&dev->ctrl_handler); 1286 kfree(dev); 1287 1288 return 0; 1289 } 1290 1291 static int gc0310_probe(struct i2c_client *client) 1292 { 1293 struct gc0310_device *dev; 1294 int ret; 1295 void *pdata; 1296 unsigned int i; 1297 1298 dev = kzalloc(sizeof(*dev), GFP_KERNEL); 1299 if (!dev) 1300 return -ENOMEM; 1301 1302 mutex_init(&dev->input_lock); 1303 1304 dev->fmt_idx = 0; 1305 v4l2_i2c_subdev_init(&dev->sd, client, &gc0310_ops); 1306 1307 pdata = gmin_camera_platform_data(&dev->sd, 1308 ATOMISP_INPUT_FORMAT_RAW_8, 1309 atomisp_bayer_order_grbg); 1310 if (!pdata) { 1311 ret = -EINVAL; 1312 goto out_free; 1313 } 1314 1315 ret = gc0310_s_config(&dev->sd, client->irq, pdata); 1316 if (ret) 1317 goto out_free; 1318 1319 ret = atomisp_register_i2c_module(&dev->sd, pdata, RAW_CAMERA); 1320 if (ret) 1321 goto out_free; 1322 1323 dev->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; 1324 dev->pad.flags = MEDIA_PAD_FL_SOURCE; 1325 dev->format.code = MEDIA_BUS_FMT_SGRBG8_1X8; 1326 dev->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; 1327 ret = 1328 v4l2_ctrl_handler_init(&dev->ctrl_handler, 1329 ARRAY_SIZE(gc0310_controls)); 1330 if (ret) { 1331 gc0310_remove(client); 1332 return ret; 1333 } 1334 1335 for (i = 0; i < ARRAY_SIZE(gc0310_controls); i++) 1336 v4l2_ctrl_new_custom(&dev->ctrl_handler, &gc0310_controls[i], 1337 NULL); 1338 1339 if (dev->ctrl_handler.error) { 1340 gc0310_remove(client); 1341 return dev->ctrl_handler.error; 1342 } 1343 1344 /* Use same lock for controls as for everything else. */ 1345 dev->ctrl_handler.lock = &dev->input_lock; 1346 dev->sd.ctrl_handler = &dev->ctrl_handler; 1347 1348 ret = media_entity_pads_init(&dev->sd.entity, 1, &dev->pad); 1349 if (ret) 1350 gc0310_remove(client); 1351 1352 return ret; 1353 out_free: 1354 v4l2_device_unregister_subdev(&dev->sd); 1355 kfree(dev); 1356 return ret; 1357 } 1358 1359 static const struct acpi_device_id gc0310_acpi_match[] = { 1360 {"XXGC0310"}, 1361 {"INT0310"}, 1362 {}, 1363 }; 1364 MODULE_DEVICE_TABLE(acpi, gc0310_acpi_match); 1365 1366 static struct i2c_driver gc0310_driver = { 1367 .driver = { 1368 .name = "gc0310", 1369 .acpi_match_table = gc0310_acpi_match, 1370 }, 1371 .probe_new = gc0310_probe, 1372 .remove = gc0310_remove, 1373 }; 1374 module_i2c_driver(gc0310_driver); 1375 1376 MODULE_AUTHOR("Lai, Angie <angie.lai@intel.com>"); 1377 MODULE_DESCRIPTION("A low-level driver for GalaxyCore GC0310 sensors"); 1378 MODULE_LICENSE("GPL"); 1379