1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * axp288_charger.c - X-power AXP288 PMIC Charger driver
4 *
5 * Copyright (C) 2016-2017 Hans de Goede <hdegoede@redhat.com>
6 * Copyright (C) 2014 Intel Corporation
7 * Author: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
8 */
9
10 #include <linux/acpi.h>
11 #include <linux/bitops.h>
12 #include <linux/module.h>
13 #include <linux/device.h>
14 #include <linux/regmap.h>
15 #include <linux/workqueue.h>
16 #include <linux/delay.h>
17 #include <linux/platform_device.h>
18 #include <linux/usb/otg.h>
19 #include <linux/notifier.h>
20 #include <linux/power_supply.h>
21 #include <linux/property.h>
22 #include <linux/mfd/axp20x.h>
23 #include <linux/extcon.h>
24 #include <linux/dmi.h>
25 #include <asm/iosf_mbi.h>
26
27 #define PS_STAT_VBUS_TRIGGER BIT(0)
28 #define PS_STAT_BAT_CHRG_DIR BIT(2)
29 #define PS_STAT_VBAT_ABOVE_VHOLD BIT(3)
30 #define PS_STAT_VBUS_VALID BIT(4)
31 #define PS_STAT_VBUS_PRESENT BIT(5)
32
33 #define CHRG_STAT_BAT_SAFE_MODE BIT(3)
34 #define CHRG_STAT_BAT_VALID BIT(4)
35 #define CHRG_STAT_BAT_PRESENT BIT(5)
36 #define CHRG_STAT_CHARGING BIT(6)
37 #define CHRG_STAT_PMIC_OTP BIT(7)
38
39 #define VBUS_ISPOUT_CUR_LIM_MASK 0x03
40 #define VBUS_ISPOUT_CUR_LIM_BIT_POS 0
41 #define VBUS_ISPOUT_CUR_LIM_900MA 0x0 /* 900mA */
42 #define VBUS_ISPOUT_CUR_LIM_1500MA 0x1 /* 1500mA */
43 #define VBUS_ISPOUT_CUR_LIM_2000MA 0x2 /* 2000mA */
44 #define VBUS_ISPOUT_CUR_NO_LIM 0x3 /* 2500mA */
45 #define VBUS_ISPOUT_VHOLD_SET_MASK 0x38
46 #define VBUS_ISPOUT_VHOLD_SET_BIT_POS 0x3
47 #define VBUS_ISPOUT_VHOLD_SET_OFFSET 4000 /* 4000mV */
48 #define VBUS_ISPOUT_VHOLD_SET_LSB_RES 100 /* 100mV */
49 #define VBUS_ISPOUT_VHOLD_SET_4400MV 0x4 /* 4400mV */
50 #define VBUS_ISPOUT_VBUS_PATH_DIS BIT(7)
51
52 #define CHRG_CCCV_CC_MASK 0xf /* 4 bits */
53 #define CHRG_CCCV_CC_BIT_POS 0
54 #define CHRG_CCCV_CC_OFFSET 200 /* 200mA */
55 #define CHRG_CCCV_CC_LSB_RES 200 /* 200mA */
56 #define CHRG_CCCV_ITERM_20P BIT(4) /* 20% of CC */
57 #define CHRG_CCCV_CV_MASK 0x60 /* 2 bits */
58 #define CHRG_CCCV_CV_BIT_POS 5
59 #define CHRG_CCCV_CV_4100MV 0x0 /* 4.10V */
60 #define CHRG_CCCV_CV_4150MV 0x1 /* 4.15V */
61 #define CHRG_CCCV_CV_4200MV 0x2 /* 4.20V */
62 #define CHRG_CCCV_CV_4350MV 0x3 /* 4.35V */
63 #define CHRG_CCCV_CHG_EN BIT(7)
64
65 #define CNTL2_CC_TIMEOUT_MASK 0x3 /* 2 bits */
66 #define CNTL2_CC_TIMEOUT_OFFSET 6 /* 6 Hrs */
67 #define CNTL2_CC_TIMEOUT_LSB_RES 2 /* 2 Hrs */
68 #define CNTL2_CC_TIMEOUT_12HRS 0x3 /* 12 Hrs */
69 #define CNTL2_CHGLED_TYPEB BIT(4)
70 #define CNTL2_CHG_OUT_TURNON BIT(5)
71 #define CNTL2_PC_TIMEOUT_MASK 0xC0
72 #define CNTL2_PC_TIMEOUT_OFFSET 40 /* 40 mins */
73 #define CNTL2_PC_TIMEOUT_LSB_RES 10 /* 10 mins */
74 #define CNTL2_PC_TIMEOUT_70MINS 0x3
75
76 #define CHRG_ILIM_TEMP_LOOP_EN BIT(3)
77 #define CHRG_VBUS_ILIM_MASK 0xf0
78 #define CHRG_VBUS_ILIM_BIT_POS 4
79 #define CHRG_VBUS_ILIM_100MA 0x0 /* 100mA */
80 #define CHRG_VBUS_ILIM_500MA 0x1 /* 500mA */
81 #define CHRG_VBUS_ILIM_900MA 0x2 /* 900mA */
82 #define CHRG_VBUS_ILIM_1500MA 0x3 /* 1500mA */
83 #define CHRG_VBUS_ILIM_2000MA 0x4 /* 2000mA */
84 #define CHRG_VBUS_ILIM_2500MA 0x5 /* 2500mA */
85 #define CHRG_VBUS_ILIM_3000MA 0x6 /* 3000mA */
86 #define CHRG_VBUS_ILIM_3500MA 0x7 /* 3500mA */
87 #define CHRG_VBUS_ILIM_4000MA 0x8 /* 4000mA */
88
89 #define CHRG_VLTFC_0C 0xA5 /* 0 DegC */
90 #define CHRG_VHTFC_45C 0x1F /* 45 DegC */
91
92 #define FG_CNTL_OCV_ADJ_EN BIT(3)
93
94 #define CV_4100MV 4100 /* 4100mV */
95 #define CV_4150MV 4150 /* 4150mV */
96 #define CV_4200MV 4200 /* 4200mV */
97 #define CV_4350MV 4350 /* 4350mV */
98
99 #define AXP288_REG_UPDATE_INTERVAL (60 * HZ)
100
101 #define AXP288_EXTCON_DEV_NAME "axp288_extcon"
102 #define USB_HOST_EXTCON_HID "INT3496"
103 #define USB_HOST_EXTCON_NAME "INT3496:00"
104
105 enum {
106 VBUS_OV_IRQ = 0,
107 CHARGE_DONE_IRQ,
108 CHARGE_CHARGING_IRQ,
109 BAT_SAFE_QUIT_IRQ,
110 BAT_SAFE_ENTER_IRQ,
111 QCBTU_IRQ,
112 CBTU_IRQ,
113 QCBTO_IRQ,
114 CBTO_IRQ,
115 CHRG_INTR_END,
116 };
117
118 struct axp288_chrg_info {
119 struct platform_device *pdev;
120 struct regmap *regmap;
121 struct regmap_irq_chip_data *regmap_irqc;
122 int irq[CHRG_INTR_END];
123 struct power_supply *psy_usb;
124 struct mutex lock;
125
126 /* OTG/Host mode */
127 struct {
128 struct work_struct work;
129 struct extcon_dev *cable;
130 struct notifier_block id_nb;
131 bool id_short;
132 } otg;
133
134 /* SDP/CDP/DCP USB charging cable notifications */
135 struct {
136 struct extcon_dev *edev;
137 struct notifier_block nb;
138 struct work_struct work;
139 } cable;
140
141 int cc;
142 int cv;
143 int max_cc;
144 int max_cv;
145
146 unsigned long last_updated;
147 unsigned int input_status;
148 unsigned int op_mode;
149 unsigned int backend_control;
150 bool valid;
151 };
152
axp288_charger_set_cc(struct axp288_chrg_info * info,int cc)153 static inline int axp288_charger_set_cc(struct axp288_chrg_info *info, int cc)
154 {
155 u8 reg_val;
156 int ret;
157
158 if (cc < CHRG_CCCV_CC_OFFSET)
159 cc = CHRG_CCCV_CC_OFFSET;
160 else if (cc > info->max_cc)
161 cc = info->max_cc;
162
163 reg_val = (cc - CHRG_CCCV_CC_OFFSET) / CHRG_CCCV_CC_LSB_RES;
164 cc = (reg_val * CHRG_CCCV_CC_LSB_RES) + CHRG_CCCV_CC_OFFSET;
165 reg_val = reg_val << CHRG_CCCV_CC_BIT_POS;
166
167 ret = regmap_update_bits(info->regmap,
168 AXP20X_CHRG_CTRL1,
169 CHRG_CCCV_CC_MASK, reg_val);
170 if (ret >= 0)
171 info->cc = cc;
172
173 return ret;
174 }
175
axp288_charger_set_cv(struct axp288_chrg_info * info,int cv)176 static inline int axp288_charger_set_cv(struct axp288_chrg_info *info, int cv)
177 {
178 u8 reg_val;
179 int ret;
180
181 if (cv <= CV_4100MV) {
182 reg_val = CHRG_CCCV_CV_4100MV;
183 cv = CV_4100MV;
184 } else if (cv <= CV_4150MV) {
185 reg_val = CHRG_CCCV_CV_4150MV;
186 cv = CV_4150MV;
187 } else if (cv <= CV_4200MV) {
188 reg_val = CHRG_CCCV_CV_4200MV;
189 cv = CV_4200MV;
190 } else {
191 reg_val = CHRG_CCCV_CV_4350MV;
192 cv = CV_4350MV;
193 }
194
195 reg_val = reg_val << CHRG_CCCV_CV_BIT_POS;
196
197 ret = regmap_update_bits(info->regmap,
198 AXP20X_CHRG_CTRL1,
199 CHRG_CCCV_CV_MASK, reg_val);
200
201 if (ret >= 0)
202 info->cv = cv;
203
204 return ret;
205 }
206
axp288_charger_get_vbus_inlmt(struct axp288_chrg_info * info)207 static int axp288_charger_get_vbus_inlmt(struct axp288_chrg_info *info)
208 {
209 unsigned int val;
210
211 val = info->backend_control;
212
213 val >>= CHRG_VBUS_ILIM_BIT_POS;
214 switch (val) {
215 case CHRG_VBUS_ILIM_100MA:
216 return 100000;
217 case CHRG_VBUS_ILIM_500MA:
218 return 500000;
219 case CHRG_VBUS_ILIM_900MA:
220 return 900000;
221 case CHRG_VBUS_ILIM_1500MA:
222 return 1500000;
223 case CHRG_VBUS_ILIM_2000MA:
224 return 2000000;
225 case CHRG_VBUS_ILIM_2500MA:
226 return 2500000;
227 case CHRG_VBUS_ILIM_3000MA:
228 return 3000000;
229 case CHRG_VBUS_ILIM_3500MA:
230 return 3500000;
231 default:
232 /* All b1xxx values map to 4000 mA */
233 return 4000000;
234 }
235 }
236
axp288_charger_set_vbus_inlmt(struct axp288_chrg_info * info,int inlmt)237 static inline int axp288_charger_set_vbus_inlmt(struct axp288_chrg_info *info,
238 int inlmt)
239 {
240 int ret;
241 u8 reg_val;
242
243 if (inlmt >= 4000000)
244 reg_val = CHRG_VBUS_ILIM_4000MA << CHRG_VBUS_ILIM_BIT_POS;
245 else if (inlmt >= 3500000)
246 reg_val = CHRG_VBUS_ILIM_3500MA << CHRG_VBUS_ILIM_BIT_POS;
247 else if (inlmt >= 3000000)
248 reg_val = CHRG_VBUS_ILIM_3000MA << CHRG_VBUS_ILIM_BIT_POS;
249 else if (inlmt >= 2500000)
250 reg_val = CHRG_VBUS_ILIM_2500MA << CHRG_VBUS_ILIM_BIT_POS;
251 else if (inlmt >= 2000000)
252 reg_val = CHRG_VBUS_ILIM_2000MA << CHRG_VBUS_ILIM_BIT_POS;
253 else if (inlmt >= 1500000)
254 reg_val = CHRG_VBUS_ILIM_1500MA << CHRG_VBUS_ILIM_BIT_POS;
255 else if (inlmt >= 900000)
256 reg_val = CHRG_VBUS_ILIM_900MA << CHRG_VBUS_ILIM_BIT_POS;
257 else if (inlmt >= 500000)
258 reg_val = CHRG_VBUS_ILIM_500MA << CHRG_VBUS_ILIM_BIT_POS;
259 else
260 reg_val = CHRG_VBUS_ILIM_100MA << CHRG_VBUS_ILIM_BIT_POS;
261
262 ret = regmap_update_bits(info->regmap, AXP20X_CHRG_BAK_CTRL,
263 CHRG_VBUS_ILIM_MASK, reg_val);
264 if (ret < 0)
265 dev_err(&info->pdev->dev, "charger BAK control %d\n", ret);
266
267 return ret;
268 }
269
axp288_charger_vbus_path_select(struct axp288_chrg_info * info,bool enable)270 static int axp288_charger_vbus_path_select(struct axp288_chrg_info *info,
271 bool enable)
272 {
273 int ret;
274
275 if (enable)
276 ret = regmap_update_bits(info->regmap, AXP20X_VBUS_IPSOUT_MGMT,
277 VBUS_ISPOUT_VBUS_PATH_DIS, 0);
278 else
279 ret = regmap_update_bits(info->regmap, AXP20X_VBUS_IPSOUT_MGMT,
280 VBUS_ISPOUT_VBUS_PATH_DIS, VBUS_ISPOUT_VBUS_PATH_DIS);
281
282 if (ret < 0)
283 dev_err(&info->pdev->dev, "axp288 vbus path select %d\n", ret);
284
285 return ret;
286 }
287
axp288_charger_enable_charger(struct axp288_chrg_info * info,bool enable)288 static int axp288_charger_enable_charger(struct axp288_chrg_info *info,
289 bool enable)
290 {
291 int ret;
292
293 if (enable)
294 ret = regmap_update_bits(info->regmap, AXP20X_CHRG_CTRL1,
295 CHRG_CCCV_CHG_EN, CHRG_CCCV_CHG_EN);
296 else
297 ret = regmap_update_bits(info->regmap, AXP20X_CHRG_CTRL1,
298 CHRG_CCCV_CHG_EN, 0);
299 if (ret < 0)
300 dev_err(&info->pdev->dev, "axp288 enable charger %d\n", ret);
301
302 return ret;
303 }
304
axp288_get_charger_health(struct axp288_chrg_info * info)305 static int axp288_get_charger_health(struct axp288_chrg_info *info)
306 {
307 if (!(info->input_status & PS_STAT_VBUS_PRESENT))
308 return POWER_SUPPLY_HEALTH_UNKNOWN;
309
310 if (!(info->input_status & PS_STAT_VBUS_VALID))
311 return POWER_SUPPLY_HEALTH_DEAD;
312 else if (info->op_mode & CHRG_STAT_PMIC_OTP)
313 return POWER_SUPPLY_HEALTH_OVERHEAT;
314 else if (info->op_mode & CHRG_STAT_BAT_SAFE_MODE)
315 return POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
316 else
317 return POWER_SUPPLY_HEALTH_GOOD;
318 }
319
axp288_charger_usb_set_property(struct power_supply * psy,enum power_supply_property psp,const union power_supply_propval * val)320 static int axp288_charger_usb_set_property(struct power_supply *psy,
321 enum power_supply_property psp,
322 const union power_supply_propval *val)
323 {
324 struct axp288_chrg_info *info = power_supply_get_drvdata(psy);
325 int ret = 0;
326 int scaled_val;
327
328 mutex_lock(&info->lock);
329 switch (psp) {
330 case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
331 scaled_val = min(val->intval, info->max_cc);
332 scaled_val = DIV_ROUND_CLOSEST(scaled_val, 1000);
333 ret = axp288_charger_set_cc(info, scaled_val);
334 if (ret < 0) {
335 dev_warn(&info->pdev->dev, "set charge current failed\n");
336 goto out;
337 }
338 break;
339 case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
340 scaled_val = min(val->intval, info->max_cv);
341 scaled_val = DIV_ROUND_CLOSEST(scaled_val, 1000);
342 ret = axp288_charger_set_cv(info, scaled_val);
343 if (ret < 0) {
344 dev_warn(&info->pdev->dev, "set charge voltage failed\n");
345 goto out;
346 }
347 break;
348 case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
349 ret = axp288_charger_set_vbus_inlmt(info, val->intval);
350 if (ret < 0) {
351 dev_warn(&info->pdev->dev, "set input current limit failed\n");
352 goto out;
353 }
354 info->valid = false;
355 break;
356 default:
357 ret = -EINVAL;
358 }
359
360 out:
361 mutex_unlock(&info->lock);
362 return ret;
363 }
364
axp288_charger_reg_readb(struct axp288_chrg_info * info,int reg,unsigned int * ret_val)365 static int axp288_charger_reg_readb(struct axp288_chrg_info *info, int reg, unsigned int *ret_val)
366 {
367 int ret;
368
369 ret = regmap_read(info->regmap, reg, ret_val);
370 if (ret < 0) {
371 dev_err(&info->pdev->dev, "Error %d on reading value from register 0x%04x\n",
372 ret,
373 reg);
374 return ret;
375 }
376 return 0;
377 }
378
axp288_charger_usb_update_property(struct axp288_chrg_info * info)379 static int axp288_charger_usb_update_property(struct axp288_chrg_info *info)
380 {
381 int ret = 0;
382
383 if (info->valid && time_before(jiffies, info->last_updated + AXP288_REG_UPDATE_INTERVAL))
384 return 0;
385
386 dev_dbg(&info->pdev->dev, "Charger updating register values...\n");
387
388 ret = iosf_mbi_block_punit_i2c_access();
389 if (ret < 0)
390 return ret;
391
392 ret = axp288_charger_reg_readb(info, AXP20X_PWR_INPUT_STATUS, &info->input_status);
393 if (ret < 0)
394 goto out;
395
396 ret = axp288_charger_reg_readb(info, AXP20X_PWR_OP_MODE, &info->op_mode);
397 if (ret < 0)
398 goto out;
399
400 ret = axp288_charger_reg_readb(info, AXP20X_CHRG_BAK_CTRL, &info->backend_control);
401 if (ret < 0)
402 goto out;
403
404 info->last_updated = jiffies;
405 info->valid = true;
406 out:
407 iosf_mbi_unblock_punit_i2c_access();
408 return ret;
409 }
410
axp288_charger_usb_get_property(struct power_supply * psy,enum power_supply_property psp,union power_supply_propval * val)411 static int axp288_charger_usb_get_property(struct power_supply *psy,
412 enum power_supply_property psp,
413 union power_supply_propval *val)
414 {
415 struct axp288_chrg_info *info = power_supply_get_drvdata(psy);
416 int ret;
417
418 mutex_lock(&info->lock);
419 ret = axp288_charger_usb_update_property(info);
420 if (ret < 0)
421 goto out;
422
423 switch (psp) {
424 case POWER_SUPPLY_PROP_PRESENT:
425 /* Check for OTG case first */
426 if (info->otg.id_short) {
427 val->intval = 0;
428 break;
429 }
430 val->intval = (info->input_status & PS_STAT_VBUS_PRESENT) ? 1 : 0;
431 break;
432 case POWER_SUPPLY_PROP_ONLINE:
433 /* Check for OTG case first */
434 if (info->otg.id_short) {
435 val->intval = 0;
436 break;
437 }
438 val->intval = (info->input_status & PS_STAT_VBUS_VALID) ? 1 : 0;
439 break;
440 case POWER_SUPPLY_PROP_HEALTH:
441 val->intval = axp288_get_charger_health(info);
442 break;
443 case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
444 val->intval = info->cc * 1000;
445 break;
446 case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
447 val->intval = info->max_cc * 1000;
448 break;
449 case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
450 val->intval = info->cv * 1000;
451 break;
452 case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
453 val->intval = info->max_cv * 1000;
454 break;
455 case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
456 val->intval = axp288_charger_get_vbus_inlmt(info);
457 break;
458 default:
459 ret = -EINVAL;
460 }
461
462 out:
463 mutex_unlock(&info->lock);
464 return ret;
465 }
466
axp288_charger_property_is_writeable(struct power_supply * psy,enum power_supply_property psp)467 static int axp288_charger_property_is_writeable(struct power_supply *psy,
468 enum power_supply_property psp)
469 {
470 int ret;
471
472 switch (psp) {
473 case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
474 case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
475 case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
476 ret = 1;
477 break;
478 default:
479 ret = 0;
480 }
481
482 return ret;
483 }
484
485 static enum power_supply_property axp288_usb_props[] = {
486 POWER_SUPPLY_PROP_PRESENT,
487 POWER_SUPPLY_PROP_ONLINE,
488 POWER_SUPPLY_PROP_TYPE,
489 POWER_SUPPLY_PROP_HEALTH,
490 POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
491 POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
492 POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
493 POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
494 POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
495 };
496
497 static const struct power_supply_desc axp288_charger_desc = {
498 .name = "axp288_charger",
499 .type = POWER_SUPPLY_TYPE_USB,
500 .properties = axp288_usb_props,
501 .num_properties = ARRAY_SIZE(axp288_usb_props),
502 .get_property = axp288_charger_usb_get_property,
503 .set_property = axp288_charger_usb_set_property,
504 .property_is_writeable = axp288_charger_property_is_writeable,
505 };
506
axp288_charger_irq_thread_handler(int irq,void * dev)507 static irqreturn_t axp288_charger_irq_thread_handler(int irq, void *dev)
508 {
509 struct axp288_chrg_info *info = dev;
510 int i;
511
512 for (i = 0; i < CHRG_INTR_END; i++) {
513 if (info->irq[i] == irq)
514 break;
515 }
516
517 if (i >= CHRG_INTR_END) {
518 dev_warn(&info->pdev->dev, "spurious interrupt!!\n");
519 return IRQ_NONE;
520 }
521
522 switch (i) {
523 case VBUS_OV_IRQ:
524 dev_dbg(&info->pdev->dev, "VBUS Over Voltage INTR\n");
525 break;
526 case CHARGE_DONE_IRQ:
527 dev_dbg(&info->pdev->dev, "Charging Done INTR\n");
528 break;
529 case CHARGE_CHARGING_IRQ:
530 dev_dbg(&info->pdev->dev, "Start Charging IRQ\n");
531 break;
532 case BAT_SAFE_QUIT_IRQ:
533 dev_dbg(&info->pdev->dev,
534 "Quit Safe Mode(restart timer) Charging IRQ\n");
535 break;
536 case BAT_SAFE_ENTER_IRQ:
537 dev_dbg(&info->pdev->dev,
538 "Enter Safe Mode(timer expire) Charging IRQ\n");
539 break;
540 case QCBTU_IRQ:
541 dev_dbg(&info->pdev->dev,
542 "Quit Battery Under Temperature(CHRG) INTR\n");
543 break;
544 case CBTU_IRQ:
545 dev_dbg(&info->pdev->dev,
546 "Hit Battery Under Temperature(CHRG) INTR\n");
547 break;
548 case QCBTO_IRQ:
549 dev_dbg(&info->pdev->dev,
550 "Quit Battery Over Temperature(CHRG) INTR\n");
551 break;
552 case CBTO_IRQ:
553 dev_dbg(&info->pdev->dev,
554 "Hit Battery Over Temperature(CHRG) INTR\n");
555 break;
556 default:
557 dev_warn(&info->pdev->dev, "Spurious Interrupt!!!\n");
558 goto out;
559 }
560 mutex_lock(&info->lock);
561 info->valid = false;
562 mutex_unlock(&info->lock);
563 power_supply_changed(info->psy_usb);
564 out:
565 return IRQ_HANDLED;
566 }
567
568 /*
569 * The HP Pavilion x2 10 series comes in a number of variants:
570 * Bay Trail SoC + AXP288 PMIC, Micro-USB, DMI_BOARD_NAME: "8021"
571 * Bay Trail SoC + AXP288 PMIC, Type-C, DMI_BOARD_NAME: "815D"
572 * Cherry Trail SoC + AXP288 PMIC, Type-C, DMI_BOARD_NAME: "813E"
573 * Cherry Trail SoC + TI PMIC, Type-C, DMI_BOARD_NAME: "827C" or "82F4"
574 *
575 * The variants with the AXP288 + Type-C connector are all kinds of special:
576 *
577 * 1. They use a Type-C connector which the AXP288 does not support, so when
578 * using a Type-C charger it is not recognized. Unlike most AXP288 devices,
579 * this model actually has mostly working ACPI AC / Battery code, the ACPI code
580 * "solves" this by simply setting the input_current_limit to 3A.
581 * There are still some issues with the ACPI code, so we use this native driver,
582 * and to solve the charging not working (500mA is not enough) issue we hardcode
583 * the 3A input_current_limit like the ACPI code does.
584 *
585 * 2. If no charger is connected the machine boots with the vbus-path disabled.
586 * Normally this is done when a 5V boost converter is active to avoid the PMIC
587 * trying to charge from the 5V boost converter's output. This is done when
588 * an OTG host cable is inserted and the ID pin on the micro-B receptacle is
589 * pulled low and the ID pin has an ACPI event handler associated with it
590 * which re-enables the vbus-path when the ID pin is pulled high when the
591 * OTG host cable is removed. The Type-C connector has no ID pin, there is
592 * no ID pin handler and there appears to be no 5V boost converter, so we
593 * end up not charging because the vbus-path is disabled, until we unplug
594 * the charger which automatically clears the vbus-path disable bit and then
595 * on the second plug-in of the adapter we start charging. To solve the not
596 * charging on first charger plugin we unconditionally enable the vbus-path at
597 * probe on this model, which is safe since there is no 5V boost converter.
598 */
599 static const struct dmi_system_id axp288_hp_x2_dmi_ids[] = {
600 {
601 .matches = {
602 DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
603 DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "HP Pavilion x2 Detachable"),
604 DMI_EXACT_MATCH(DMI_BOARD_NAME, "815D"),
605 },
606 },
607 {
608 .matches = {
609 DMI_EXACT_MATCH(DMI_SYS_VENDOR, "HP"),
610 DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "HP Pavilion x2 Detachable"),
611 DMI_EXACT_MATCH(DMI_BOARD_NAME, "813E"),
612 },
613 },
614 {} /* Terminating entry */
615 };
616
axp288_charger_extcon_evt_worker(struct work_struct * work)617 static void axp288_charger_extcon_evt_worker(struct work_struct *work)
618 {
619 struct axp288_chrg_info *info =
620 container_of(work, struct axp288_chrg_info, cable.work);
621 int ret, current_limit;
622 struct extcon_dev *edev = info->cable.edev;
623 unsigned int val;
624
625 ret = regmap_read(info->regmap, AXP20X_PWR_INPUT_STATUS, &val);
626 if (ret < 0) {
627 dev_err(&info->pdev->dev, "Error reading status (%d)\n", ret);
628 return;
629 }
630
631 /* Offline? Disable charging and bail */
632 if (!(val & PS_STAT_VBUS_VALID)) {
633 dev_dbg(&info->pdev->dev, "USB charger disconnected\n");
634 axp288_charger_enable_charger(info, false);
635 mutex_lock(&info->lock);
636 info->valid = false;
637 mutex_unlock(&info->lock);
638 power_supply_changed(info->psy_usb);
639 return;
640 }
641
642 /* Determine cable/charger type */
643 if (dmi_check_system(axp288_hp_x2_dmi_ids)) {
644 /* See comment above axp288_hp_x2_dmi_ids declaration */
645 dev_dbg(&info->pdev->dev, "HP X2 with Type-C, setting inlmt to 3A\n");
646 current_limit = 3000000;
647 } else if (extcon_get_state(edev, EXTCON_CHG_USB_SDP) > 0) {
648 dev_dbg(&info->pdev->dev, "USB SDP charger is connected\n");
649 current_limit = 500000;
650 } else if (extcon_get_state(edev, EXTCON_CHG_USB_CDP) > 0) {
651 dev_dbg(&info->pdev->dev, "USB CDP charger is connected\n");
652 current_limit = 1500000;
653 } else if (extcon_get_state(edev, EXTCON_CHG_USB_DCP) > 0) {
654 dev_dbg(&info->pdev->dev, "USB DCP charger is connected\n");
655 current_limit = 2000000;
656 } else {
657 /* Charger type detection still in progress, bail. */
658 return;
659 }
660
661 /* Set vbus current limit first, then enable charger */
662 ret = axp288_charger_set_vbus_inlmt(info, current_limit);
663 if (ret == 0)
664 axp288_charger_enable_charger(info, true);
665 else
666 dev_err(&info->pdev->dev,
667 "error setting current limit (%d)\n", ret);
668
669 mutex_lock(&info->lock);
670 info->valid = false;
671 mutex_unlock(&info->lock);
672 power_supply_changed(info->psy_usb);
673 }
674
axp288_charger_handle_cable_evt(struct notifier_block * nb,unsigned long event,void * param)675 static int axp288_charger_handle_cable_evt(struct notifier_block *nb,
676 unsigned long event, void *param)
677 {
678 struct axp288_chrg_info *info =
679 container_of(nb, struct axp288_chrg_info, cable.nb);
680 schedule_work(&info->cable.work);
681 return NOTIFY_OK;
682 }
683
axp288_charger_otg_evt_worker(struct work_struct * work)684 static void axp288_charger_otg_evt_worker(struct work_struct *work)
685 {
686 struct axp288_chrg_info *info =
687 container_of(work, struct axp288_chrg_info, otg.work);
688 struct extcon_dev *edev = info->otg.cable;
689 int ret, usb_host = extcon_get_state(edev, EXTCON_USB_HOST);
690
691 dev_dbg(&info->pdev->dev, "external connector USB-Host is %s\n",
692 usb_host ? "attached" : "detached");
693
694 /*
695 * Set usb_id_short flag to avoid running charger detection logic
696 * in case usb host.
697 */
698 info->otg.id_short = usb_host;
699
700 /* Disable VBUS path before enabling the 5V boost */
701 ret = axp288_charger_vbus_path_select(info, !info->otg.id_short);
702 if (ret < 0)
703 dev_warn(&info->pdev->dev, "vbus path disable failed\n");
704 }
705
axp288_charger_handle_otg_evt(struct notifier_block * nb,unsigned long event,void * param)706 static int axp288_charger_handle_otg_evt(struct notifier_block *nb,
707 unsigned long event, void *param)
708 {
709 struct axp288_chrg_info *info =
710 container_of(nb, struct axp288_chrg_info, otg.id_nb);
711
712 schedule_work(&info->otg.work);
713
714 return NOTIFY_OK;
715 }
716
charger_init_hw_regs(struct axp288_chrg_info * info)717 static int charger_init_hw_regs(struct axp288_chrg_info *info)
718 {
719 int ret, cc, cv;
720 unsigned int val;
721
722 /* Program temperature thresholds */
723 ret = regmap_write(info->regmap, AXP20X_V_LTF_CHRG, CHRG_VLTFC_0C);
724 if (ret < 0) {
725 dev_err(&info->pdev->dev, "register(%x) write error(%d)\n",
726 AXP20X_V_LTF_CHRG, ret);
727 return ret;
728 }
729
730 ret = regmap_write(info->regmap, AXP20X_V_HTF_CHRG, CHRG_VHTFC_45C);
731 if (ret < 0) {
732 dev_err(&info->pdev->dev, "register(%x) write error(%d)\n",
733 AXP20X_V_HTF_CHRG, ret);
734 return ret;
735 }
736
737 /* Do not turn-off charger o/p after charge cycle ends */
738 ret = regmap_update_bits(info->regmap,
739 AXP20X_CHRG_CTRL2,
740 CNTL2_CHG_OUT_TURNON, CNTL2_CHG_OUT_TURNON);
741 if (ret < 0) {
742 dev_err(&info->pdev->dev, "register(%x) write error(%d)\n",
743 AXP20X_CHRG_CTRL2, ret);
744 return ret;
745 }
746
747 /* Setup ending condition for charging to be 10% of I(chrg) */
748 ret = regmap_update_bits(info->regmap,
749 AXP20X_CHRG_CTRL1,
750 CHRG_CCCV_ITERM_20P, 0);
751 if (ret < 0) {
752 dev_err(&info->pdev->dev, "register(%x) write error(%d)\n",
753 AXP20X_CHRG_CTRL1, ret);
754 return ret;
755 }
756
757 /* Disable OCV-SOC curve calibration */
758 ret = regmap_update_bits(info->regmap,
759 AXP20X_CC_CTRL,
760 FG_CNTL_OCV_ADJ_EN, 0);
761 if (ret < 0) {
762 dev_err(&info->pdev->dev, "register(%x) write error(%d)\n",
763 AXP20X_CC_CTRL, ret);
764 return ret;
765 }
766
767 if (dmi_check_system(axp288_hp_x2_dmi_ids)) {
768 /* See comment above axp288_hp_x2_dmi_ids declaration */
769 ret = axp288_charger_vbus_path_select(info, true);
770 if (ret < 0)
771 return ret;
772 } else {
773 /* Set Vhold to the factory default / recommended 4.4V */
774 val = VBUS_ISPOUT_VHOLD_SET_4400MV << VBUS_ISPOUT_VHOLD_SET_BIT_POS;
775 ret = regmap_update_bits(info->regmap, AXP20X_VBUS_IPSOUT_MGMT,
776 VBUS_ISPOUT_VHOLD_SET_MASK, val);
777 if (ret < 0) {
778 dev_err(&info->pdev->dev, "register(%x) write error(%d)\n",
779 AXP20X_VBUS_IPSOUT_MGMT, ret);
780 return ret;
781 }
782 }
783
784 /* Read current charge voltage and current limit */
785 ret = regmap_read(info->regmap, AXP20X_CHRG_CTRL1, &val);
786 if (ret < 0) {
787 dev_err(&info->pdev->dev, "register(%x) read error(%d)\n",
788 AXP20X_CHRG_CTRL1, ret);
789 return ret;
790 }
791
792 /* Determine charge voltage */
793 cv = (val & CHRG_CCCV_CV_MASK) >> CHRG_CCCV_CV_BIT_POS;
794 switch (cv) {
795 case CHRG_CCCV_CV_4100MV:
796 info->cv = CV_4100MV;
797 break;
798 case CHRG_CCCV_CV_4150MV:
799 info->cv = CV_4150MV;
800 break;
801 case CHRG_CCCV_CV_4200MV:
802 info->cv = CV_4200MV;
803 break;
804 case CHRG_CCCV_CV_4350MV:
805 info->cv = CV_4350MV;
806 break;
807 }
808
809 /* Determine charge current limit */
810 cc = (val & CHRG_CCCV_CC_MASK) >> CHRG_CCCV_CC_BIT_POS;
811 cc = (cc * CHRG_CCCV_CC_LSB_RES) + CHRG_CCCV_CC_OFFSET;
812 info->cc = cc;
813
814 /*
815 * Do not allow the user to configure higher settings then those
816 * set by the firmware
817 */
818 info->max_cv = info->cv;
819 info->max_cc = info->cc;
820
821 return 0;
822 }
823
axp288_charger_cancel_work(void * data)824 static void axp288_charger_cancel_work(void *data)
825 {
826 struct axp288_chrg_info *info = data;
827
828 cancel_work_sync(&info->otg.work);
829 cancel_work_sync(&info->cable.work);
830 }
831
axp288_charger_probe(struct platform_device * pdev)832 static int axp288_charger_probe(struct platform_device *pdev)
833 {
834 int ret, i, pirq;
835 struct axp288_chrg_info *info;
836 struct device *dev = &pdev->dev;
837 struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
838 struct power_supply_config charger_cfg = {};
839 const char *extcon_name = NULL;
840 unsigned int val;
841
842 /*
843 * Normally the native AXP288 fg/charger drivers are preferred but
844 * on some devices the ACPI drivers should be used instead.
845 */
846 if (!acpi_quirk_skip_acpi_ac_and_battery())
847 return -ENODEV;
848
849 /*
850 * On some devices the fuelgauge and charger parts of the axp288 are
851 * not used, check that the fuelgauge is enabled (CC_CTRL != 0).
852 */
853 ret = regmap_read(axp20x->regmap, AXP20X_CC_CTRL, &val);
854 if (ret < 0)
855 return ret;
856 if (val == 0)
857 return -ENODEV;
858
859 info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
860 if (!info)
861 return -ENOMEM;
862
863 mutex_init(&info->lock);
864 info->pdev = pdev;
865 info->regmap = axp20x->regmap;
866 info->regmap_irqc = axp20x->regmap_irqc;
867
868 info->cable.edev = extcon_get_extcon_dev(AXP288_EXTCON_DEV_NAME);
869 if (IS_ERR(info->cable.edev)) {
870 dev_err_probe(dev, PTR_ERR(info->cable.edev),
871 "extcon_get_extcon_dev(%s) failed\n",
872 AXP288_EXTCON_DEV_NAME);
873 return PTR_ERR(info->cable.edev);
874 }
875
876 /*
877 * On devices with broken ACPI GPIO event handlers there also is no ACPI
878 * "INT3496" (USB_HOST_EXTCON_HID) device. x86-android-tablets.ko
879 * instantiates an "intel-int3496" extcon on these devs as a workaround.
880 */
881 if (acpi_quirk_skip_gpio_event_handlers())
882 extcon_name = "intel-int3496";
883 else if (acpi_dev_present(USB_HOST_EXTCON_HID, NULL, -1))
884 extcon_name = USB_HOST_EXTCON_NAME;
885
886 if (extcon_name) {
887 info->otg.cable = extcon_get_extcon_dev(extcon_name);
888 if (IS_ERR(info->otg.cable)) {
889 dev_err_probe(dev, PTR_ERR(info->otg.cable),
890 "extcon_get_extcon_dev(%s) failed\n",
891 USB_HOST_EXTCON_NAME);
892 return PTR_ERR(info->otg.cable);
893 }
894 dev_info(dev, "Using " USB_HOST_EXTCON_HID " extcon for usb-id\n");
895 }
896
897 platform_set_drvdata(pdev, info);
898
899 ret = charger_init_hw_regs(info);
900 if (ret)
901 return ret;
902
903 /* Register with power supply class */
904 charger_cfg.drv_data = info;
905 info->psy_usb = devm_power_supply_register(dev, &axp288_charger_desc,
906 &charger_cfg);
907 if (IS_ERR(info->psy_usb)) {
908 ret = PTR_ERR(info->psy_usb);
909 dev_err(dev, "failed to register power supply: %d\n", ret);
910 return ret;
911 }
912
913 /* Cancel our work on cleanup, register this before the notifiers */
914 ret = devm_add_action(dev, axp288_charger_cancel_work, info);
915 if (ret)
916 return ret;
917
918 /* Register for extcon notification */
919 INIT_WORK(&info->cable.work, axp288_charger_extcon_evt_worker);
920 info->cable.nb.notifier_call = axp288_charger_handle_cable_evt;
921 ret = devm_extcon_register_notifier_all(dev, info->cable.edev,
922 &info->cable.nb);
923 if (ret) {
924 dev_err(dev, "failed to register cable extcon notifier\n");
925 return ret;
926 }
927 schedule_work(&info->cable.work);
928
929 /* Register for OTG notification */
930 INIT_WORK(&info->otg.work, axp288_charger_otg_evt_worker);
931 info->otg.id_nb.notifier_call = axp288_charger_handle_otg_evt;
932 if (info->otg.cable) {
933 ret = devm_extcon_register_notifier(dev, info->otg.cable,
934 EXTCON_USB_HOST, &info->otg.id_nb);
935 if (ret) {
936 dev_err(dev, "failed to register EXTCON_USB_HOST notifier\n");
937 return ret;
938 }
939 schedule_work(&info->otg.work);
940 }
941
942 /* Register charger interrupts */
943 for (i = 0; i < CHRG_INTR_END; i++) {
944 pirq = platform_get_irq(info->pdev, i);
945 if (pirq < 0)
946 return pirq;
947
948 info->irq[i] = regmap_irq_get_virq(info->regmap_irqc, pirq);
949 if (info->irq[i] < 0) {
950 dev_warn(&info->pdev->dev,
951 "failed to get virtual interrupt=%d\n", pirq);
952 return info->irq[i];
953 }
954 ret = devm_request_threaded_irq(&info->pdev->dev, info->irq[i],
955 NULL, axp288_charger_irq_thread_handler,
956 IRQF_ONESHOT, info->pdev->name, info);
957 if (ret) {
958 dev_err(dev, "failed to request interrupt=%d\n",
959 info->irq[i]);
960 return ret;
961 }
962 }
963
964 return 0;
965 }
966
967 static const struct platform_device_id axp288_charger_id_table[] = {
968 { .name = "axp288_charger" },
969 {},
970 };
971 MODULE_DEVICE_TABLE(platform, axp288_charger_id_table);
972
973 static struct platform_driver axp288_charger_driver = {
974 .probe = axp288_charger_probe,
975 .id_table = axp288_charger_id_table,
976 .driver = {
977 .name = "axp288_charger",
978 },
979 };
980
981 module_platform_driver(axp288_charger_driver);
982
983 MODULE_AUTHOR("Ramakrishna Pallala <ramakrishna.pallala@intel.com>");
984 MODULE_DESCRIPTION("X-power AXP288 Charger Driver");
985 MODULE_LICENSE("GPL v2");
986