xref: /openbmc/linux/drivers/power/supply/Kconfig (revision 8b35bf59) 
1menuconfig POWER_SUPPLY
2	bool "Power supply class support"
3	help
4	  Say Y here to enable power supply class support. This allows
5	  power supply (batteries, AC, USB) monitoring by userspace
6	  via sysfs and uevent (if available) and/or APM kernel interface
7	  (if selected below).
8
9if POWER_SUPPLY
10
11config POWER_SUPPLY_DEBUG
12	bool "Power supply debug"
13	help
14	  Say Y here to enable debugging messages for power supply class
15	  and drivers.
16
17config PDA_POWER
18	tristate "Generic PDA/phone power driver"
19	depends on !S390
20	help
21	  Say Y here to enable generic power driver for PDAs and phones with
22	  one or two external power supplies (AC/USB) connected to main and
23	  backup batteries, and optional builtin charger.
24
25config APM_POWER
26	tristate "APM emulation for class batteries"
27	depends on APM_EMULATION
28	help
29	  Say Y here to enable support APM status emulation using
30	  battery class devices.
31
32config GENERIC_ADC_BATTERY
33	tristate "Generic battery support using IIO"
34	depends on IIO
35	help
36	  Say Y here to enable support for the generic battery driver
37	  which uses IIO framework to read adc.
38
39config MAX8925_POWER
40	tristate "MAX8925 battery charger support"
41	depends on MFD_MAX8925
42	help
43	  Say Y here to enable support for the battery charger in the Maxim
44	  MAX8925 PMIC.
45
46config WM831X_BACKUP
47	tristate "WM831X backup battery charger support"
48	depends on MFD_WM831X
49	help
50	  Say Y here to enable support for the backup battery charger
51	  in the Wolfson Microelectronics WM831x PMICs.
52
53config WM831X_POWER
54	tristate "WM831X PMU support"
55	depends on MFD_WM831X
56	help
57	  Say Y here to enable support for the power management unit
58	  provided by Wolfson Microelectronics WM831x PMICs.
59
60config WM8350_POWER
61        tristate "WM8350 PMU support"
62        depends on MFD_WM8350
63        help
64          Say Y here to enable support for the power management unit
65	  provided by the Wolfson Microelectronics WM8350 PMIC.
66
67config TEST_POWER
68	tristate "Test power driver"
69	help
70	  This driver is used for testing. It's safe to say M here.
71
72config BATTERY_88PM860X
73	tristate "Marvell 88PM860x battery driver"
74	depends on MFD_88PM860X
75	help
76	  Say Y here to enable battery monitor for Marvell 88PM860x chip.
77
78config BATTERY_ACT8945A
79	tristate "Active-semi ACT8945A charger driver"
80	depends on MFD_ACT8945A || COMPILE_TEST
81	help
82	  Say Y here to enable support for power supply provided by
83	  Active-semi ActivePath ACT8945A charger.
84
85config BATTERY_CPCAP
86	tristate "Motorola CPCAP PMIC battery driver"
87	depends on MFD_CPCAP && IIO
88	default MFD_CPCAP
89	help
90	  Say Y here to enable support for battery on Motorola
91	  phones and tablets such as droid 4.
92
93config BATTERY_DS2760
94	tristate "DS2760 battery driver (HP iPAQ & others)"
95	depends on W1 && W1_SLAVE_DS2760
96	help
97	  Say Y here to enable support for batteries with ds2760 chip.
98
99config BATTERY_DS2780
100	tristate "DS2780 battery driver"
101	depends on HAS_IOMEM
102	select W1
103	select W1_SLAVE_DS2780
104	help
105	  Say Y here to enable support for batteries with ds2780 chip.
106
107config BATTERY_DS2781
108	tristate "DS2781 battery driver"
109	depends on HAS_IOMEM
110	select W1
111	select W1_SLAVE_DS2781
112	help
113	  If you enable this you will have the DS2781 battery driver support.
114
115	  The battery monitor chip is used in many batteries/devices
116	  as the one who is responsible for charging/discharging/monitoring
117	  Li+ batteries.
118
119	  If you are unsure, say N.
120
121config BATTERY_DS2782
122	tristate "DS2782/DS2786 standalone gas-gauge"
123	depends on I2C
124	help
125	  Say Y here to enable support for the DS2782/DS2786 standalone battery
126	  gas-gauge.
127
128config BATTERY_LEGO_EV3
129	tristate "LEGO MINDSTORMS EV3 battery"
130	depends on OF && IIO && GPIOLIB
131	help
132	  Say Y here to enable support for the LEGO MINDSTORMS EV3 battery.
133
134config BATTERY_PMU
135	tristate "Apple PMU battery"
136	depends on PPC32 && ADB_PMU
137	help
138	  Say Y here to expose battery information on Apple machines
139	  through the generic battery class.
140
141config BATTERY_OLPC
142	tristate "One Laptop Per Child battery"
143	depends on X86_32 && OLPC
144	help
145	  Say Y to enable support for the battery on the OLPC laptop.
146
147config BATTERY_TOSA
148	tristate "Sharp SL-6000 (tosa) battery"
149	depends on MACH_TOSA && MFD_TC6393XB && TOUCHSCREEN_WM97XX
150	help
151	  Say Y to enable support for the battery on the Sharp Zaurus
152	  SL-6000 (tosa) models.
153
154config BATTERY_COLLIE
155	tristate "Sharp SL-5500 (collie) battery"
156	depends on SA1100_COLLIE && MCP_UCB1200
157	help
158	  Say Y to enable support for the battery on the Sharp Zaurus
159	  SL-5500 (collie) models.
160
161config BATTERY_IPAQ_MICRO
162	tristate "iPAQ Atmel Micro ASIC battery driver"
163	depends on MFD_IPAQ_MICRO
164	help
165	  Choose this option if you want to monitor battery status on
166	  Compaq/HP iPAQ h3100 and h3600.
167
168config BATTERY_WM97XX
169	bool "WM97xx generic battery driver"
170	depends on TOUCHSCREEN_WM97XX=y
171	help
172	  Say Y to enable support for battery measured by WM97xx aux port.
173
174config BATTERY_SBS
175        tristate "SBS Compliant gas gauge"
176        depends on I2C
177        help
178	  Say Y to include support for SBS battery driver for SBS-compliant
179	  gas gauges.
180
181config CHARGER_SBS
182        tristate "SBS Compliant charger"
183        depends on I2C
184        help
185	  Say Y to include support for SBS compilant battery chargers.
186
187config BATTERY_BQ27XXX
188	tristate "BQ27xxx battery driver"
189	help
190	  Say Y here to enable support for batteries with BQ27xxx chips.
191
192config BATTERY_BQ27XXX_I2C
193	tristate "BQ27xxx I2C support"
194	depends on BATTERY_BQ27XXX
195	depends on I2C
196	default y
197	help
198	  Say Y here to enable support for batteries with BQ27xxx chips
199	  connected over an I2C bus.
200
201config BATTERY_BQ27XXX_DT_UPDATES_NVM
202	bool "BQ27xxx support for update of NVM/flash data memory"
203	depends on BATTERY_BQ27XXX_I2C
204	help
205	  Say Y here to enable devicetree monitored-battery config to update
206	  NVM/flash data memory. Only enable this option for devices with a
207	  fuel gauge mounted on the circuit board, and a battery that cannot
208	  easily be replaced with one of a different type. Not for
209	  general-purpose kernels, as this can cause misconfiguration of a
210	  smart battery with embedded NVM/flash.
211
212config BATTERY_DA9030
213	tristate "DA9030 battery driver"
214	depends on PMIC_DA903X
215	help
216	  Say Y here to enable support for batteries charger integrated into
217	  DA9030 PMIC.
218
219config BATTERY_DA9052
220	tristate "Dialog DA9052 Battery"
221	depends on PMIC_DA9052
222	help
223	  Say Y here to enable support for batteries charger integrated into
224	  DA9052 PMIC.
225
226config CHARGER_DA9150
227	tristate "Dialog Semiconductor DA9150 Charger support"
228	depends on MFD_DA9150
229	depends on DA9150_GPADC
230	depends on IIO
231	help
232	  Say Y here to enable support for charger unit of the DA9150
233	  Integrated Charger & Fuel-Gauge IC.
234
235	  This driver can also be built as a module. If so, the module will be
236	  called da9150-charger.
237
238config BATTERY_DA9150
239	tristate "Dialog Semiconductor DA9150 Fuel Gauge support"
240	depends on MFD_DA9150
241	help
242	  Say Y here to enable support for the Fuel-Gauge unit of the DA9150
243	  Integrated Charger & Fuel-Gauge IC
244
245	  This driver can also be built as a module. If so, the module will be
246	  called da9150-fg.
247
248config CHARGER_AXP20X
249	tristate "X-Powers AXP20X and AXP22X AC power supply driver"
250	depends on MFD_AXP20X
251	depends on AXP20X_ADC
252	depends on IIO
253	help
254	  Say Y here to enable support for X-Powers AXP20X and AXP22X PMICs' AC
255	  power supply.
256
257	  This driver can also be built as a module. If so, the module will be
258	  called axp20x_ac_power.
259
260config BATTERY_AXP20X
261	tristate "X-Powers AXP20X battery driver"
262	depends on MFD_AXP20X
263	depends on AXP20X_ADC
264	depends on IIO
265	help
266	  Say Y here to enable support for X-Powers AXP20X PMICs' battery power
267	  supply.
268
269	  This driver can also be built as a module. If so, the module will be
270	  called axp20x_battery.
271
272config AXP20X_POWER
273	tristate "AXP20x power supply driver"
274	depends on MFD_AXP20X
275	depends on IIO
276	help
277	  This driver provides support for the power supply features of
278	  AXP20x PMIC.
279
280config AXP288_CHARGER
281	tristate "X-Powers AXP288 Charger"
282	depends on MFD_AXP20X && EXTCON_AXP288
283	help
284	  Say yes here to have support X-Power AXP288 power management IC (PMIC)
285	  integrated charger.
286
287config AXP288_FUEL_GAUGE
288	tristate "X-Powers AXP288 Fuel Gauge"
289	depends on MFD_AXP20X && IIO
290	help
291	  Say yes here to have support for X-Power power management IC (PMIC)
292	  Fuel Gauge. The device provides battery statistics and status
293	  monitoring as well as alerts for battery over/under voltage and
294	  over/under temperature.
295
296config BATTERY_MAX17040
297	tristate "Maxim MAX17040 Fuel Gauge"
298	depends on I2C
299	help
300	  MAX17040 is fuel-gauge systems for lithium-ion (Li+) batteries
301	  in handheld and portable equipment. The MAX17040 is configured
302	  to operate with a single lithium cell
303
304config BATTERY_MAX17042
305	tristate "Maxim MAX17042/17047/17050/8997/8966 Fuel Gauge"
306	depends on I2C
307	select REGMAP_I2C
308	help
309	  MAX17042 is fuel-gauge systems for lithium-ion (Li+) batteries
310	  in handheld and portable equipment. The MAX17042 is configured
311	  to operate with a single lithium cell. MAX8997 and MAX8966 are
312	  multi-function devices that include fuel gauages that are compatible
313	  with MAX17042. This driver also supports max17047/50 chips which are
314	  improved version of max17042.
315
316config BATTERY_Z2
317	tristate "Z2 battery driver"
318	depends on I2C && MACH_ZIPIT2
319	help
320	  Say Y to include support for the battery on the Zipit Z2.
321
322config BATTERY_S3C_ADC
323	tristate "Battery driver for Samsung ADC based monitoring"
324	depends on S3C_ADC
325	help
326	  Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery
327
328config BATTERY_TWL4030_MADC
329	tristate "TWL4030 MADC battery driver"
330	depends on TWL4030_MADC
331	help
332	  Say Y here to enable this dumb driver for batteries managed
333	  through the TWL4030 MADC.
334
335config CHARGER_88PM860X
336	tristate "Marvell 88PM860x Charger driver"
337	depends on MFD_88PM860X && BATTERY_88PM860X
338	help
339	  Say Y here to enable charger for Marvell 88PM860x chip.
340
341config CHARGER_PCF50633
342	tristate "NXP PCF50633 MBC"
343	depends on MFD_PCF50633
344	help
345	 Say Y to include support for NXP PCF50633 Main Battery Charger.
346
347config BATTERY_JZ4740
348	tristate "Ingenic JZ4740 battery"
349	depends on MACH_JZ4740
350	depends on MFD_JZ4740_ADC
351	help
352	  Say Y to enable support for the battery on Ingenic JZ4740 based
353	  boards.
354
355	  This driver can be build as a module. If so, the module will be
356	  called jz4740-battery.
357
358config BATTERY_RX51
359	tristate "Nokia RX-51 (N900) battery driver"
360	depends on TWL4030_MADC
361	help
362	  Say Y here to enable support for battery information on Nokia
363	  RX-51, also known as N900 tablet.
364
365config CHARGER_CPCAP
366	tristate "CPCAP PMIC Charger Driver"
367	depends on MFD_CPCAP && IIO
368	depends on OMAP_USB2 || (!OMAP_USB2 && COMPILE_TEST)
369	default MFD_CPCAP
370	help
371	  Say Y to enable support for CPCAP PMIC charger driver for Motorola
372	  mobile devices such as Droid 4.
373
374config CHARGER_ISP1704
375	tristate "ISP1704 USB Charger Detection"
376	depends on USB_PHY
377	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
378	help
379	  Say Y to enable support for USB Charger Detection with
380	  ISP1707/ISP1704 USB transceivers.
381
382config CHARGER_MAX8903
383	tristate "MAX8903 Battery DC-DC Charger for USB and Adapter Power"
384	help
385	  Say Y to enable support for the MAX8903 DC-DC charger and sysfs.
386	  The driver supports controlling charger-enable and current-limit
387	  pins based on the status of charger connections with interrupt
388	  handlers.
389
390config CHARGER_TWL4030
391	tristate "OMAP TWL4030 BCI charger driver"
392	depends on IIO && TWL4030_CORE
393	help
394	  Say Y here to enable support for TWL4030 Battery Charge Interface.
395
396config CHARGER_LP8727
397	tristate "TI/National Semiconductor LP8727 charger driver"
398	depends on I2C
399	help
400	  Say Y here to enable support for LP8727 Charger Driver.
401
402config CHARGER_LP8788
403	tristate "TI LP8788 charger driver"
404	depends on MFD_LP8788
405	depends on LP8788_ADC
406	depends on IIO
407	help
408	  Say Y to enable support for the LP8788 linear charger.
409
410config CHARGER_GPIO
411	tristate "GPIO charger"
412	depends on GPIOLIB || COMPILE_TEST
413	help
414	  Say Y to include support for chargers which report their online status
415	  through a GPIO pin.
416
417	  This driver can be build as a module. If so, the module will be
418	  called gpio-charger.
419
420config CHARGER_MANAGER
421	bool "Battery charger manager for multiple chargers"
422	depends on REGULATOR
423	select EXTCON
424	help
425          Say Y to enable charger-manager support, which allows multiple
426          chargers attached to a battery and multiple batteries attached to a
427          system. The charger-manager also can monitor charging status in
428          runtime and in suspend-to-RAM by waking up the system periodically
429          with help of suspend_again support.
430
431config CHARGER_LTC3651
432	tristate "LTC3651 charger"
433	depends on GPIOLIB
434	help
435	  Say Y to include support for the LTC3651 battery charger which reports
436	  its status via GPIO lines.
437
438config CHARGER_MAX14577
439	tristate "Maxim MAX14577/77836 battery charger driver"
440	depends on MFD_MAX14577
441	help
442	  Say Y to enable support for the battery charger control sysfs and
443	  platform data of MAX14577/77836 MUICs.
444
445config CHARGER_DETECTOR_MAX14656
446	tristate "Maxim MAX14656 USB charger detector"
447	depends on I2C
448	depends on OF
449	help
450	  Say Y to enable support for the Maxim MAX14656 USB charger detector.
451	  The device is compliant with the USB Battery Charging Specification
452	  Revision 1.2 and can be found e.g. in Kindle 4/5th generation
453	  readers and certain LG devices.
454
455config CHARGER_MAX77693
456	tristate "Maxim MAX77693 battery charger driver"
457	depends on MFD_MAX77693
458	help
459	  Say Y to enable support for the Maxim MAX77693 battery charger.
460
461config CHARGER_MAX8997
462	tristate "Maxim MAX8997/MAX8966 PMIC battery charger driver"
463	depends on MFD_MAX8997 && REGULATOR_MAX8997
464	help
465	  Say Y to enable support for the battery charger control sysfs and
466	  platform data of MAX8997/LP3974 PMICs.
467
468config CHARGER_MAX8998
469	tristate "Maxim MAX8998/LP3974 PMIC battery charger driver"
470	depends on MFD_MAX8998 && REGULATOR_MAX8998
471	help
472	  Say Y to enable support for the battery charger control sysfs and
473	  platform data of MAX8998/LP3974 PMICs.
474
475config CHARGER_QCOM_SMBB
476	tristate "Qualcomm Switch-Mode Battery Charger and Boost"
477	depends on MFD_SPMI_PMIC || COMPILE_TEST
478	depends on OF
479	depends on EXTCON
480	depends on REGULATOR
481	help
482	  Say Y to include support for the Switch-Mode Battery Charger and
483	  Boost (SMBB) hardware found in Qualcomm PM8941 PMICs.  The charger
484	  is an integrated, single-cell lithium-ion battery charger.  DT
485	  configuration is required for loading, see the devicetree
486	  documentation for more detail.  The base name for this driver is
487	  'pm8941_charger'.
488
489config CHARGER_BQ2415X
490	tristate "TI BQ2415x battery charger driver"
491	depends on I2C
492	help
493	  Say Y to enable support for the TI BQ2415x battery charger
494	  PMICs.
495
496	  You'll need this driver to charge batteries on e.g. Nokia
497	  RX-51/N900.
498
499config CHARGER_BQ24190
500	tristate "TI BQ24190 battery charger driver"
501	depends on I2C
502	depends on EXTCON
503	depends on GPIOLIB || COMPILE_TEST
504	help
505	  Say Y to enable support for the TI BQ24190 battery charger.
506
507config CHARGER_BQ24257
508	tristate "TI BQ24250/24251/24257 battery charger driver"
509	depends on I2C
510	depends on GPIOLIB || COMPILE_TEST
511	depends on REGMAP_I2C
512	help
513	  Say Y to enable support for the TI BQ24250, BQ24251, and BQ24257 battery
514	  chargers.
515
516config CHARGER_BQ24735
517	tristate "TI BQ24735 battery charger support"
518	depends on I2C
519	depends on GPIOLIB || COMPILE_TEST
520	help
521	  Say Y to enable support for the TI BQ24735 battery charger.
522
523config CHARGER_BQ25890
524	tristate "TI BQ25890 battery charger driver"
525	depends on I2C
526	depends on GPIOLIB || COMPILE_TEST
527	select REGMAP_I2C
528	help
529	  Say Y to enable support for the TI BQ25890 battery charger.
530
531config CHARGER_SMB347
532	tristate "Summit Microelectronics SMB347 Battery Charger"
533	depends on I2C
534	select REGMAP_I2C
535	help
536	  Say Y to include support for Summit Microelectronics SMB347
537	  Battery Charger.
538
539config CHARGER_TPS65090
540	tristate "TPS65090 battery charger driver"
541	depends on MFD_TPS65090
542	help
543	 Say Y here to enable support for battery charging with TPS65090
544	 PMIC chips.
545
546config CHARGER_TPS65217
547	tristate "TPS65217 battery charger driver"
548	depends on MFD_TPS65217
549	help
550	 Say Y here to enable support for battery charging with TPS65217
551	 PMIC chips.
552
553config BATTERY_GAUGE_LTC2941
554	tristate "LTC2941/LTC2943 Battery Gauge Driver"
555	depends on I2C
556	help
557	  Say Y here to include support for LTC2941 and LTC2943 Battery
558	  Gauge IC. The driver reports the charge count continuously, and
559	  measures the voltage and temperature every 10 seconds.
560
561config AB8500_BM
562	bool "AB8500 Battery Management Driver"
563	depends on AB8500_CORE && AB8500_GPADC
564	help
565	  Say Y to include support for AB8500 battery management.
566
567config BATTERY_GOLDFISH
568	tristate "Goldfish battery driver"
569	depends on GOLDFISH || COMPILE_TEST
570	depends on HAS_IOMEM
571	help
572	  Say Y to enable support for the battery and AC power in the
573	  Goldfish emulator.
574
575config BATTERY_RT5033
576	tristate "RT5033 fuel gauge support"
577	depends on MFD_RT5033
578	help
579	  This adds support for battery fuel gauge in Richtek RT5033 PMIC.
580	  The fuelgauge calculates and determines the battery state of charge
581	  according to battery open circuit voltage.
582
583config CHARGER_RT9455
584	tristate "Richtek RT9455 battery charger driver"
585	depends on I2C
586	depends on GPIOLIB || COMPILE_TEST
587	select REGMAP_I2C
588	help
589	  Say Y to enable support for Richtek RT9455 battery charger.
590
591endif # POWER_SUPPLY
592