power: supply: rt5033_charger: recognize EXTCON setting

CHARGER_RT5033 should honor the EXTCON setting to prevent these
build errors:

riscv64-linux-ld: drivers/power/supply/rt5033_charger.o: in fun

power: supply: rt5033_charger: recognize EXTCON setting

CHARGER_RT5033 should honor the EXTCON setting to prevent these
build errors:

riscv64-linux-ld: drivers/power/supply/rt5033_charger.o: in function `.L33':
rt5033_charger.c:(.text.rt5033_charger_probe+0x578): undefined reference to `extcon_find_edev_by_node'
riscv64-linux-ld: drivers/power/supply/rt5033_charger.o: in function `.L0 ':
rt5033_charger.c:(.text.rt5033_charger_probe+0x64e): undefined reference to `devm_extcon_register_notifier_all'
riscv64-linux-ld: drivers/power/supply/rt5033_charger.o: in function `.L96':
rt5033_charger.c:(.text.rt5033_charger_extcon_work+0x32): undefined reference to `extcon_get_state'

Fixes: 12cc585f36b8 ("power: supply: rt5033_charger: Add cable detection and USB OTG supply")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jakob Hauser <jahau@rocketmail.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Lee Jones <lee@kernel.org>
Cc: linux-pm@vger.kernel.org
Link: https://lore.kernel.org/r/20230828224201.26823-1-rdunlap@infradead.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

show more ...

power: supply: add Qualcomm PMI8998 SMB2 Charger driver

Add a driver for the SMB2 charger block found in the Qualcomm PMI8998
and PM660.

This driver is capable of utilising Qualcomm's Automatic Pow

power: supply: add Qualcomm PMI8998 SMB2 Charger driver

Add a driver for the SMB2 charger block found in the Qualcomm PMI8998
and PM660.

This driver is capable of utilising Qualcomm's Automatic Power Source
Detection (APSD) BC1.2 implementation, as well as Automatic Input
Current Limiting (AICL) to configure the maximum input current
limit of DCP (wall) chargers.

Quick Charge is not currently supported.

Most devices using the smb2 charger have a secondary dedicated charger
chip which is used in parallel to enable faster charger without
overheating. However, not all do, as a result to ensure safety until
these are supported, the maximum current is limited to ~1A via the
FAST_CHARGE_CURRENT_CFG register.

Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Tested-by: Joel Selvaraj <joelselvaraj.oss@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

show more ...

power: supply: rt5033_charger: Add RT5033 charger device driver

This patch adds device driver of Richtek RT5033 PMIC. The driver supports
switching charger. rt5033 charger provides three charging mo

power: supply: rt5033_charger: Add RT5033 charger device driver

This patch adds device driver of Richtek RT5033 PMIC. The driver supports
switching charger. rt5033 charger provides three charging modes. The charging
modes are pre-charge mode, fast charge mode and constant voltage mode. They
vary in charge rate, the charge parameters can be controlled by i2c interface.

Tested-by: Raymond Hackley <raymondhackley@protonmail.com>
Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/9556d4ebb30fd321e37aa0eb343554122e4720c9.1684182964.git.jahau@rocketmail.com

show more ...

mfd: rk808: Split into core and i2c

Split rk808 into a core and an i2c part in preparation for
SPI support.

Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> # for RTC
Tested-by: Diederik

mfd: rk808: Split into core and i2c

Split rk808 into a core and an i2c part in preparation for
SPI support.

Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> # for RTC
Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B
Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230504173618.142075-6-sebastian.reichel@collabora.com
Signed-off-by: Lee Jones <lee@kernel.org>

show more ...

power: supply: Introduce Qualcomm PMIC GLINK power supply

The PMIC GLINK service, running on a coprocessor of modern Qualcomm
platforms, deals with battery charging and fuel gauging, as well as
repo

power: supply: Introduce Qualcomm PMIC GLINK power supply

The PMIC GLINK service, running on a coprocessor of modern Qualcomm
platforms, deals with battery charging and fuel gauging, as well as
reporting status of AC and wireless power supplies.

As this is just one of the functionalities provided by the PMIC GLINK
service, this power supply driver is implemented as an auxilirary bus
driver, spawned by the main "pmic glink" driver when the PMIC GLINK
service is detected.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # SM8350 PDX215
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-MTP & SM8450-HDK
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230207144241.1767973-1-quic_bjorande@quicinc.com

show more ...

power: supply: rt9467: Add Richtek RT9467 charger driver

RT9467 is a switch-mode single cell Li-Ion/Li-Polymer battery charger
for portable applications.

It integrates a synchronous PWM controller,

power: supply: rt9467: Add Richtek RT9467 charger driver

RT9467 is a switch-mode single cell Li-Ion/Li-Polymer battery charger
for portable applications.

It integrates a synchronous PWM controller, power MOSFETs,
input current sensing and regulation, high-accuracy voltage regulation,
and charge termination. The charge current is regulated through
integrated sensing resistors.

The RT9467 also features USB On-The-Go (OTG) support. It also integrates
D+/D- pin for USB host/charging port detection.

Co-developed-by: ChiYuan Huang <cy_huang@richtek.com>
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

show more ...

power: supply: rt9471: Add Richtek RT9471 charger driver

Add support for the RT9471 3A 1-Cell Li+ battery charger.

The RT9471 is a highly-integrated 3A switch mode battery charger with
low impedanc

power: supply: rt9471: Add Richtek RT9471 charger driver

Add support for the RT9471 3A 1-Cell Li+ battery charger.

The RT9471 is a highly-integrated 3A switch mode battery charger with
low impedance power path to better optimize the charging efficiency.

Co-developed-by: Alina Yu <alina_yu@richtek.com>
Signed-off-by: Alina Yu <alina_yu@richtek.com>
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

show more ...

power: remove pda_power supply driver

This driver was used for a couple of Intel PXA and Samsung S3C24xx
based PDAs, but all of those are now removed from the kernel, so
the driver itself is no long

power: remove pda_power supply driver

This driver was used for a couple of Intel PXA and Samsung S3C24xx
based PDAs, but all of those are now removed from the kernel, so
the driver itself is no longer useful.

Cc: Anton Vorontsov <cbou@mail.ru>
Cc: linux-pm@vger.kernel.org
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

power: remove tosa_battery driver

The PXA tosa machine is removed, so this driver is no longer
in use.

Cc: linux-pm@vger.kernel.org
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Ack

power: remove tosa_battery driver

The PXA tosa machine is removed, so this driver is no longer
in use.

Cc: linux-pm@vger.kernel.org
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

power: remove z2_battery driver

The PXA z2 platform is gone, and this driver is now orphaned.

Cc: linux-pm@vger.kernel.org
Cc: Peter Edwards <sweetlilmre@gmail.com>
Acked-by: Sebastian Reichel <seb

power: remove z2_battery driver

The PXA z2 platform is gone, and this driver is now orphaned.

Cc: linux-pm@vger.kernel.org
Cc: Peter Edwards <sweetlilmre@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

power: remove s3c adc battery driver

The s3c-adc driver is removed along with the s3c24xx platform,
so the battery driver is no longer needed either.

Reviewed-by: Krzysztof Kozlowski <krzysztof.koz

power: remove s3c adc battery driver

The s3c-adc driver is removed along with the s3c24xx platform,
so the battery driver is no longer needed either.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

power: supply: mt6370: uses IIO interfaces, depends on IIO

The mt6370-charger driver uses IIO interfaces and produces build
errors when CONFIG_IIO is not set, so it should depend on IIO.

ERROR: mod

power: supply: mt6370: uses IIO interfaces, depends on IIO

The mt6370-charger driver uses IIO interfaces and produces build
errors when CONFIG_IIO is not set, so it should depend on IIO.

ERROR: modpost: "iio_read_channel_processed" [drivers/power/supply/mt6370-charger.ko] undefined!
ERROR: modpost: "devm_iio_channel_get_all" [drivers/power/supply/mt6370-charger.ko] undefined!

Fixes: 233cb8a47d65 ("power: supply: mt6370: Add MediaTek MT6370 charger driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: ChiaEn Wu <chiaen_wu@richtek.com>
Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

show more ...

power: supply: Add charger driver for Rockchip RK817

Add support for the Rockchip rk817 battery charger integrated into the
rk817 PMIC.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-

power: supply: Add charger driver for Rockchip RK817

Add support for the Rockchip rk817 battery charger integrated into the
rk817 PMIC.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220827021623.23829-4-macroalpha82@gmail.com

show more ...

power: supply: mt6370: Add MediaTek MT6370 charger driver

MediaTek MT6370 is a SubPMIC consisting of a single cell battery charger
with ADC monitoring, RGB LEDs, dual channel flashlight, WLED backli

power: supply: mt6370: Add MediaTek MT6370 charger driver

MediaTek MT6370 is a SubPMIC consisting of a single cell battery charger
with ADC monitoring, RGB LEDs, dual channel flashlight, WLED backlight
driver, display bias voltage supply, one general purpose LDO, and the
USB Type-C & PD controller complies with the latest USB Type-C and PD
standards.

Add support for the MediaTek MT6370 Charger driver. The charger module
of MT6370 supports High-Accuracy Voltage/Current Regulation,
Average Input Current Regulation, Battery Temperature Sensing,
Over-Temperature Protection, DPDM Detection for BC1.2.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

show more ...

power: supply: Add a driver for Injoinic power bank ICs

This driver supports several chip variants which all share the same I2C
register interface. Since the chip will turn off and become inaccessib

power: supply: Add a driver for Injoinic power bank ICs

This driver supports several chip variants which all share the same I2C
register interface. Since the chip will turn off and become inaccessible
under conditions outside of software control (e.g. upon button press or
input voltage removal), some special handling is needed to delay the
initialization of the IC until it is accessible.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

show more ...

power: supply: Static data for Samsung batteries

If we detect a Samsung SDI battery, we return a static
struct power_supply_battery_info and avoid looking further.

Signed-off-by: Linus Walleij <lin

power: supply: Static data for Samsung batteries

If we detect a Samsung SDI battery, we return a static
struct power_supply_battery_info and avoid looking further.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

show more ...

power: supply: axp288_fuel_gauge: Use acpi_quirk_skip_acpi_ac_and_battery()

Normally the native AXP288 fg/charger drivers are preferred but one some
devices the ACPI drivers should be used instead.

power: supply: axp288_fuel_gauge: Use acpi_quirk_skip_acpi_ac_and_battery()

Normally the native AXP288 fg/charger drivers are preferred but one some
devices the ACPI drivers should be used instead.

The ACPI battery/ac drivers use the acpi_quirk_skip_acpi_ac_and_battery()
helper to determine if they should skip loading because native fuel-gauge/
charger drivers like the AXP288 drivers will be used.

The new acpi_quirk_skip_acpi_ac_and_battery() helper includes a list of
exceptions for boards where the ACPI drivers should be used instead.

Use this new helper to avoid loading on such boards. Note this requires
adding a Kconfig dependency on ACPI, this is not a problem because ACPI
should be enabled on all boards with an AXP288 PMIC anyways.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

show more ...

power: supply: axp288_charger: Use acpi_quirk_skip_acpi_ac_and_battery()

Normally the native AXP288 fg/charger drivers are preferred but one some
devices the ACPI drivers should be used instead.

Th

power: supply: axp288_charger: Use acpi_quirk_skip_acpi_ac_and_battery()

Normally the native AXP288 fg/charger drivers are preferred but one some
devices the ACPI drivers should be used instead.

The ACPI battery/ac drivers use the acpi_quirk_skip_acpi_ac_and_battery()
helper to determine if they should skip loading because native fuel-gauge/
charger drivers like the AXP288 drivers will be used.

The new acpi_quirk_skip_acpi_ac_and_battery() helper includes a list of
exceptions for boards where the ACPI drivers should be used instead.

Use this new helper to avoid loading on such boards. Note this requires
adding a Kconfig dependency on ACPI, this is not a problem because ACPI
should be enabled on all boards with an AXP288 PMIC anyways.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

show more ...

power: supply: ab8500: Integrate thermal zone

Instead of providing our own homebrewn thermal measurement
code for an NTC and passing tables, we put the NTC thermistor
into the device tree, create a

power: supply: ab8500: Integrate thermal zone

Instead of providing our own homebrewn thermal measurement
code for an NTC and passing tables, we put the NTC thermistor
into the device tree, create a passive thermal zone, and poll
this thermal zone for the temperature.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

show more ...

power: supply: ug3105_battery: Add driver for uPI uG3105 battery monitor

Add a new battery driver for the uPI uG3105 battery monitor.

Note the uG3105 is not a full-featured autonomous fuel-gauge. I

power: supply: ug3105_battery: Add driver for uPI uG3105 battery monitor

Add a new battery driver for the uPI uG3105 battery monitor.

Note the uG3105 is not a full-featured autonomous fuel-gauge. Instead it
is expected to be use in combination with some always on microcontroller
reading its coulomb-counter before it can wrap (must be read every 400
seconds!).

Since Linux does not monitor coulomb-counter changes while the device is
off or suspended, the coulomb counter is not used atm.

So far this driver is only used on x86/ACPI (non devicetree) devs
(also note there is no of_match table). Therefor there is no devicetree
bindings documentation for this driver's "upisemi,rsns-microohm" property
since this is not used in actual devicetree files and the dt bindings
maintainers have requested properties with no actual dt users to
_not_ be added to the dt bindings.

The property's name has been chosen so that it should not need to be
changed if/when devicetree enumeration support gets added later, as it
mirrors "maxim,rsns-microohm" from the "maxim,max17042" bindings.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

show more ...

power: supply: max77976: add Maxim MAX77976 charger driver

Add support for the MAX77976 3.5/5.5A 1-Cell Li+ Battery Charger.

This is a simple implementation enough to be used as a simple battery
ch

power: supply: max77976: add Maxim MAX77976 charger driver

Add support for the MAX77976 3.5/5.5A 1-Cell Li+ Battery Charger.

This is a simple implementation enough to be used as a simple battery
charger without OTG and boost.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

show more ...

power: supply: axp288-charger: Add depends on IOSF_MBIO to Kconfig

Add "depends on IOSF_MBI" to CONFIG_AXP288_CHARGER as the changes from
commit ed229454856e ("power: supply: axp288-charger: Optimiz

power: supply: axp288-charger: Add depends on IOSF_MBIO to Kconfig

Add "depends on IOSF_MBI" to CONFIG_AXP288_CHARGER as the changes from
commit ed229454856e ("power: supply: axp288-charger: Optimize register
reading method") use symbols which are only defined when IOSF_MBI support
is enabled.

Depending on this is ok since IOSF_MBI support should always be enabled
on devices which use the AXP288 PMIC.

Fixes: ed229454856e ("power: supply: axp288-charger: Optimize register reading method")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

show more ...

power: supply: max17042: extend help/description

Reorganize the Kconfig driver description and mention all supported
models. This helps when choosing drivers for given system.

Signed-off-by: Krzys

power: supply: max17042: extend help/description

Reorganize the Kconfig driver description and mention all supported
models. This helps when choosing drivers for given system.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

show more ...

power: supply: max17040: extend help/description

Reorganize the Kconfig driver description and mention all supported
models. This helps when choosing drivers for given system.

Signed-off-by: Krzys

power: supply: max17040: extend help/description

Reorganize the Kconfig driver description and mention all supported
models. This helps when choosing drivers for given system.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

show more ...

power: supply: smb347-charger: Implement USB VBUS regulator

SMB347 can supply power to USB VBUS, implement the USB VBUS regulator.
USB VBUS needs to be powered for switching OTG-cable USB port into

power: supply: smb347-charger: Implement USB VBUS regulator

SMB347 can supply power to USB VBUS, implement the USB VBUS regulator.
USB VBUS needs to be powered for switching OTG-cable USB port into host
mode.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

show more ...