xref: /openbmc/linux/drivers/platform/x86/acerhdf.c (revision 2243acd5)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * acerhdf - A driver which monitors the temperature
4  *           of the aspire one netbook, turns on/off the fan
5  *           as soon as the upper/lower threshold is reached.
6  *
7  * (C) 2009 - Peter Kaestle     peter (a) piie.net
8  *                              https://piie.net
9  *     2009 Borislav Petkov	bp (a) alien8.de
10  *
11  * Inspired by and many thanks to:
12  *  o acerfand   - Rachel Greenham
13  *  o acer_ec.pl - Michael Kurz     michi.kurz (at) googlemail.com
14  *               - Petr Tomasek     tomasek (#) etf,cuni,cz
15  *               - Carlos Corbacho  cathectic (at) gmail.com
16  *  o lkml       - Matthew Garrett
17  *               - Borislav Petkov
18  *               - Andreas Mohr
19  */
20 
21 #define pr_fmt(fmt) "acerhdf: " fmt
22 
23 #include <linux/kernel.h>
24 #include <linux/module.h>
25 #include <linux/dmi.h>
26 #include <linux/acpi.h>
27 #include <linux/thermal.h>
28 #include <linux/platform_device.h>
29 
30 /*
31  * The driver is started with "kernel mode off" by default. That means, the BIOS
32  * is still in control of the fan. In this mode the driver allows to read the
33  * temperature of the cpu and a userspace tool may take over control of the fan.
34  * If the driver is switched to "kernel mode" (e.g. via module parameter) the
35  * driver is in full control of the fan. If you want the module to be started in
36  * kernel mode by default, define the following:
37  */
38 #undef START_IN_KERNEL_MODE
39 
40 #define DRV_VER "0.7.0"
41 
42 /*
43  * According to the Atom N270 datasheet,
44  * (http://download.intel.com/design/processor/datashts/320032.pdf) the
45  * CPU's optimal operating limits denoted in junction temperature as
46  * measured by the on-die thermal monitor are within 0 <= Tj <= 90. So,
47  * assume 89°C is critical temperature.
48  */
49 #define ACERHDF_DEFAULT_TEMP_FANON 60000
50 #define ACERHDF_DEFAULT_TEMP_FANOFF 53000
51 #define ACERHDF_TEMP_CRIT 89000
52 #define ACERHDF_FAN_OFF 0
53 #define ACERHDF_FAN_AUTO 1
54 
55 /*
56  * No matter what value the user puts into the fanon variable, turn on the fan
57  * at 80 degree Celsius to prevent hardware damage
58  */
59 #define ACERHDF_MAX_FANON 80000
60 
61 /*
62  * Maximum interval between two temperature checks is 15 seconds, as the die
63  * can get hot really fast under heavy load (plus we shouldn't forget about
64  * possible impact of _external_ aggressive sources such as heaters, sun etc.)
65  */
66 #define ACERHDF_MAX_INTERVAL 15
67 
68 #ifdef START_IN_KERNEL_MODE
69 static int kernelmode = 1;
70 #else
71 static int kernelmode;
72 #endif
73 
74 static unsigned int interval = 10;
75 static unsigned int fanon = ACERHDF_DEFAULT_TEMP_FANON;
76 static unsigned int fanoff = ACERHDF_DEFAULT_TEMP_FANOFF;
77 static unsigned int verbose;
78 static unsigned int list_supported;
79 static unsigned int fanstate = ACERHDF_FAN_AUTO;
80 static char force_bios[16];
81 static char force_product[16];
82 static unsigned int prev_interval;
83 static struct thermal_zone_device *thz_dev;
84 static struct thermal_cooling_device *cl_dev;
85 static struct platform_device *acerhdf_dev;
86 
87 module_param(kernelmode, uint, 0);
88 MODULE_PARM_DESC(kernelmode, "Kernel mode fan control on / off");
89 module_param(fanon, uint, 0600);
90 MODULE_PARM_DESC(fanon, "Turn the fan on above this temperature");
91 module_param(fanoff, uint, 0600);
92 MODULE_PARM_DESC(fanoff, "Turn the fan off below this temperature");
93 module_param(verbose, uint, 0600);
94 MODULE_PARM_DESC(verbose, "Enable verbose dmesg output");
95 module_param(list_supported, uint, 0600);
96 MODULE_PARM_DESC(list_supported, "List supported models and BIOS versions");
97 module_param_string(force_bios, force_bios, 16, 0);
98 MODULE_PARM_DESC(force_bios, "Pretend system has this known supported BIOS version");
99 module_param_string(force_product, force_product, 16, 0);
100 MODULE_PARM_DESC(force_product, "Pretend system is this known supported model");
101 
102 /*
103  * cmd_off: to switch the fan completely off and check if the fan is off
104  *	cmd_auto: to set the BIOS in control of the fan. The BIOS regulates then
105  *		the fan speed depending on the temperature
106  */
107 struct fancmd {
108 	u8 cmd_off;
109 	u8 cmd_auto;
110 };
111 
112 struct manualcmd {
113 	u8 mreg;
114 	u8 moff;
115 };
116 
117 /* default register and command to disable fan in manual mode */
118 static const struct manualcmd mcmd = {
119 	.mreg = 0x94,
120 	.moff = 0xff,
121 };
122 
123 /* BIOS settings - only used during probe */
124 struct bios_settings {
125 	const char *vendor;
126 	const char *product;
127 	const char *version;
128 	u8 fanreg;
129 	u8 tempreg;
130 	struct fancmd cmd;
131 	int mcmd_enable;
132 };
133 
134 /* This could be a daughter struct in the above, but not worth the redirect */
135 struct ctrl_settings {
136 	u8 fanreg;
137 	u8 tempreg;
138 	struct fancmd cmd;
139 	int mcmd_enable;
140 };
141 
142 static struct thermal_trip trips[] = {
143 	[0] = { .temperature = ACERHDF_DEFAULT_TEMP_FANON,
144 		.hysteresis = ACERHDF_DEFAULT_TEMP_FANON - ACERHDF_DEFAULT_TEMP_FANOFF,
145 		.type = THERMAL_TRIP_ACTIVE },
146 
147 	[1] = { .temperature = ACERHDF_TEMP_CRIT,
148 		.type = THERMAL_TRIP_CRITICAL }
149 };
150 
151 static struct ctrl_settings ctrl_cfg __read_mostly;
152 
153 /* Register addresses and values for different BIOS versions */
154 static const struct bios_settings bios_tbl[] __initconst = {
155 	/* AOA110 */
156 	{"Acer", "AOA110", "v0.3109", 0x55, 0x58, {0x1f, 0x00}, 0},
157 	{"Acer", "AOA110", "v0.3114", 0x55, 0x58, {0x1f, 0x00}, 0},
158 	{"Acer", "AOA110", "v0.3301", 0x55, 0x58, {0xaf, 0x00}, 0},
159 	{"Acer", "AOA110", "v0.3304", 0x55, 0x58, {0xaf, 0x00}, 0},
160 	{"Acer", "AOA110", "v0.3305", 0x55, 0x58, {0xaf, 0x00}, 0},
161 	{"Acer", "AOA110", "v0.3307", 0x55, 0x58, {0xaf, 0x00}, 0},
162 	{"Acer", "AOA110", "v0.3308", 0x55, 0x58, {0x21, 0x00}, 0},
163 	{"Acer", "AOA110", "v0.3309", 0x55, 0x58, {0x21, 0x00}, 0},
164 	{"Acer", "AOA110", "v0.3310", 0x55, 0x58, {0x21, 0x00}, 0},
165 	/* AOA150 */
166 	{"Acer", "AOA150", "v0.3114", 0x55, 0x58, {0x1f, 0x00}, 0},
167 	{"Acer", "AOA150", "v0.3301", 0x55, 0x58, {0x20, 0x00}, 0},
168 	{"Acer", "AOA150", "v0.3304", 0x55, 0x58, {0x20, 0x00}, 0},
169 	{"Acer", "AOA150", "v0.3305", 0x55, 0x58, {0x20, 0x00}, 0},
170 	{"Acer", "AOA150", "v0.3307", 0x55, 0x58, {0x20, 0x00}, 0},
171 	{"Acer", "AOA150", "v0.3308", 0x55, 0x58, {0x20, 0x00}, 0},
172 	{"Acer", "AOA150", "v0.3309", 0x55, 0x58, {0x20, 0x00}, 0},
173 	{"Acer", "AOA150", "v0.3310", 0x55, 0x58, {0x20, 0x00}, 0},
174 	/* LT1005u */
175 	{"Acer", "LT-10Q", "v0.3310", 0x55, 0x58, {0x20, 0x00}, 0},
176 	/* Acer 1410 */
177 	{"Acer", "Aspire 1410", "v0.3108", 0x55, 0x58, {0x9e, 0x00}, 0},
178 	{"Acer", "Aspire 1410", "v0.3113", 0x55, 0x58, {0x9e, 0x00}, 0},
179 	{"Acer", "Aspire 1410", "v0.3115", 0x55, 0x58, {0x9e, 0x00}, 0},
180 	{"Acer", "Aspire 1410", "v0.3117", 0x55, 0x58, {0x9e, 0x00}, 0},
181 	{"Acer", "Aspire 1410", "v0.3119", 0x55, 0x58, {0x9e, 0x00}, 0},
182 	{"Acer", "Aspire 1410", "v0.3120", 0x55, 0x58, {0x9e, 0x00}, 0},
183 	{"Acer", "Aspire 1410", "v1.3204", 0x55, 0x58, {0x9e, 0x00}, 0},
184 	{"Acer", "Aspire 1410", "v1.3303", 0x55, 0x58, {0x9e, 0x00}, 0},
185 	{"Acer", "Aspire 1410", "v1.3308", 0x55, 0x58, {0x9e, 0x00}, 0},
186 	{"Acer", "Aspire 1410", "v1.3310", 0x55, 0x58, {0x9e, 0x00}, 0},
187 	{"Acer", "Aspire 1410", "v1.3314", 0x55, 0x58, {0x9e, 0x00}, 0},
188 	/* Acer 1810xx */
189 	{"Acer", "Aspire 1810TZ", "v0.3108", 0x55, 0x58, {0x9e, 0x00}, 0},
190 	{"Acer", "Aspire 1810T",  "v0.3108", 0x55, 0x58, {0x9e, 0x00}, 0},
191 	{"Acer", "Aspire 1810TZ", "v0.3113", 0x55, 0x58, {0x9e, 0x00}, 0},
192 	{"Acer", "Aspire 1810T",  "v0.3113", 0x55, 0x58, {0x9e, 0x00}, 0},
193 	{"Acer", "Aspire 1810TZ", "v0.3115", 0x55, 0x58, {0x9e, 0x00}, 0},
194 	{"Acer", "Aspire 1810T",  "v0.3115", 0x55, 0x58, {0x9e, 0x00}, 0},
195 	{"Acer", "Aspire 1810TZ", "v0.3117", 0x55, 0x58, {0x9e, 0x00}, 0},
196 	{"Acer", "Aspire 1810T",  "v0.3117", 0x55, 0x58, {0x9e, 0x00}, 0},
197 	{"Acer", "Aspire 1810TZ", "v0.3119", 0x55, 0x58, {0x9e, 0x00}, 0},
198 	{"Acer", "Aspire 1810T",  "v0.3119", 0x55, 0x58, {0x9e, 0x00}, 0},
199 	{"Acer", "Aspire 1810TZ", "v0.3120", 0x55, 0x58, {0x9e, 0x00}, 0},
200 	{"Acer", "Aspire 1810T",  "v0.3120", 0x55, 0x58, {0x9e, 0x00}, 0},
201 	{"Acer", "Aspire 1810TZ", "v1.3204", 0x55, 0x58, {0x9e, 0x00}, 0},
202 	{"Acer", "Aspire 1810T",  "v1.3204", 0x55, 0x58, {0x9e, 0x00}, 0},
203 	{"Acer", "Aspire 1810TZ", "v1.3303", 0x55, 0x58, {0x9e, 0x00}, 0},
204 	{"Acer", "Aspire 1810T",  "v1.3303", 0x55, 0x58, {0x9e, 0x00}, 0},
205 	{"Acer", "Aspire 1810TZ", "v1.3308", 0x55, 0x58, {0x9e, 0x00}, 0},
206 	{"Acer", "Aspire 1810T",  "v1.3308", 0x55, 0x58, {0x9e, 0x00}, 0},
207 	{"Acer", "Aspire 1810TZ", "v1.3310", 0x55, 0x58, {0x9e, 0x00}, 0},
208 	{"Acer", "Aspire 1810T",  "v1.3310", 0x55, 0x58, {0x9e, 0x00}, 0},
209 	{"Acer", "Aspire 1810TZ", "v1.3314", 0x55, 0x58, {0x9e, 0x00}, 0},
210 	{"Acer", "Aspire 1810T",  "v1.3314", 0x55, 0x58, {0x9e, 0x00}, 0},
211 	/* Acer 5755G */
212 	{"Acer", "Aspire 5755G",  "V1.20",   0xab, 0xb4, {0x00, 0x08}, 0},
213 	{"Acer", "Aspire 5755G",  "V1.21",   0xab, 0xb3, {0x00, 0x08}, 0},
214 	/* Acer 521 */
215 	{"Acer", "AO521", "V1.11", 0x55, 0x58, {0x1f, 0x00}, 0},
216 	/* Acer 531 */
217 	{"Acer", "AO531h", "v0.3104", 0x55, 0x58, {0x20, 0x00}, 0},
218 	{"Acer", "AO531h", "v0.3201", 0x55, 0x58, {0x20, 0x00}, 0},
219 	{"Acer", "AO531h", "v0.3304", 0x55, 0x58, {0x20, 0x00}, 0},
220 	/* Acer 751 */
221 	{"Acer", "AO751h", "V0.3206", 0x55, 0x58, {0x21, 0x00}, 0},
222 	{"Acer", "AO751h", "V0.3212", 0x55, 0x58, {0x21, 0x00}, 0},
223 	/* Acer 753 */
224 	{"Acer", "Aspire One 753", "V1.24", 0x93, 0xac, {0x14, 0x04}, 1},
225 	/* Acer 1825 */
226 	{"Acer", "Aspire 1825PTZ", "V1.3118", 0x55, 0x58, {0x9e, 0x00}, 0},
227 	{"Acer", "Aspire 1825PTZ", "V1.3127", 0x55, 0x58, {0x9e, 0x00}, 0},
228 	/* Acer Extensa 5420 */
229 	{"Acer", "Extensa 5420", "V1.17", 0x93, 0xac, {0x14, 0x04}, 1},
230 	/* Acer Aspire 5315 */
231 	{"Acer", "Aspire 5315", "V1.19", 0x93, 0xac, {0x14, 0x04}, 1},
232 	/* Acer Aspire 5739 */
233 	{"Acer", "Aspire 5739G", "V1.3311", 0x55, 0x58, {0x20, 0x00}, 0},
234 	/* Acer TravelMate 7730 */
235 	{"Acer", "TravelMate 7730G", "v0.3509", 0x55, 0x58, {0xaf, 0x00}, 0},
236 	/* Acer Aspire 7551 */
237 	{"Acer", "Aspire 7551", "V1.18", 0x93, 0xa8, {0x14, 0x04}, 1},
238 	/* Acer TravelMate TM8573T */
239 	{"Acer", "TM8573T", "V1.13", 0x93, 0xa8, {0x14, 0x04}, 1},
240 	/* Gateway */
241 	{"Gateway", "AOA110", "v0.3103",  0x55, 0x58, {0x21, 0x00}, 0},
242 	{"Gateway", "AOA150", "v0.3103",  0x55, 0x58, {0x20, 0x00}, 0},
243 	{"Gateway", "LT31",   "v1.3103",  0x55, 0x58, {0x9e, 0x00}, 0},
244 	{"Gateway", "LT31",   "v1.3201",  0x55, 0x58, {0x9e, 0x00}, 0},
245 	{"Gateway", "LT31",   "v1.3302",  0x55, 0x58, {0x9e, 0x00}, 0},
246 	{"Gateway", "LT31",   "v1.3303t", 0x55, 0x58, {0x9e, 0x00}, 0},
247 	{"Gateway", "LT31",   "v1.3307",  0x55, 0x58, {0x9e, 0x00}, 0},
248 	/* Packard Bell */
249 	{"Packard Bell", "DOA150",  "v0.3104",  0x55, 0x58, {0x21, 0x00}, 0},
250 	{"Packard Bell", "DOA150",  "v0.3105",  0x55, 0x58, {0x20, 0x00}, 0},
251 	{"Packard Bell", "AOA110",  "v0.3105",  0x55, 0x58, {0x21, 0x00}, 0},
252 	{"Packard Bell", "AOA150",  "v0.3105",  0x55, 0x58, {0x20, 0x00}, 0},
253 	{"Packard Bell", "ENBFT",   "V1.3118",  0x55, 0x58, {0x9e, 0x00}, 0},
254 	{"Packard Bell", "ENBFT",   "V1.3127",  0x55, 0x58, {0x9e, 0x00}, 0},
255 	{"Packard Bell", "DOTMU",   "v1.3303",  0x55, 0x58, {0x9e, 0x00}, 0},
256 	{"Packard Bell", "DOTMU",   "v0.3120",  0x55, 0x58, {0x9e, 0x00}, 0},
257 	{"Packard Bell", "DOTMU",   "v0.3108",  0x55, 0x58, {0x9e, 0x00}, 0},
258 	{"Packard Bell", "DOTMU",   "v0.3113",  0x55, 0x58, {0x9e, 0x00}, 0},
259 	{"Packard Bell", "DOTMU",   "v0.3115",  0x55, 0x58, {0x9e, 0x00}, 0},
260 	{"Packard Bell", "DOTMU",   "v0.3117",  0x55, 0x58, {0x9e, 0x00}, 0},
261 	{"Packard Bell", "DOTMU",   "v0.3119",  0x55, 0x58, {0x9e, 0x00}, 0},
262 	{"Packard Bell", "DOTMU",   "v1.3204",  0x55, 0x58, {0x9e, 0x00}, 0},
263 	{"Packard Bell", "DOTMA",   "v1.3201",  0x55, 0x58, {0x9e, 0x00}, 0},
264 	{"Packard Bell", "DOTMA",   "v1.3302",  0x55, 0x58, {0x9e, 0x00}, 0},
265 	{"Packard Bell", "DOTMA",   "v1.3303t", 0x55, 0x58, {0x9e, 0x00}, 0},
266 	{"Packard Bell", "DOTVR46", "v1.3308",  0x55, 0x58, {0x9e, 0x00}, 0},
267 	/* pewpew-terminator */
268 	{"", "", "", 0, 0, {0, 0}, 0}
269 };
270 
271 /*
272  * this struct is used to instruct thermal layer to use bang_bang instead of
273  * default governor for acerhdf
274  */
275 static struct thermal_zone_params acerhdf_zone_params = {
276 	.governor_name = "bang_bang",
277 };
278 
279 static int acerhdf_get_temp(int *temp)
280 {
281 	u8 read_temp;
282 
283 	if (ec_read(ctrl_cfg.tempreg, &read_temp))
284 		return -EINVAL;
285 
286 	*temp = read_temp * 1000;
287 
288 	return 0;
289 }
290 
291 static int acerhdf_get_fanstate(int *state)
292 {
293 	u8 fan;
294 
295 	if (ec_read(ctrl_cfg.fanreg, &fan))
296 		return -EINVAL;
297 
298 	if (fan != ctrl_cfg.cmd.cmd_off)
299 		*state = ACERHDF_FAN_AUTO;
300 	else
301 		*state = ACERHDF_FAN_OFF;
302 
303 	return 0;
304 }
305 
306 static void acerhdf_change_fanstate(int state)
307 {
308 	unsigned char cmd;
309 
310 	if (verbose)
311 		pr_notice("fan %s\n", state == ACERHDF_FAN_OFF ? "OFF" : "ON");
312 
313 	if ((state != ACERHDF_FAN_OFF) && (state != ACERHDF_FAN_AUTO)) {
314 		pr_err("invalid fan state %d requested, setting to auto!\n",
315 		       state);
316 		state = ACERHDF_FAN_AUTO;
317 	}
318 
319 	cmd = (state == ACERHDF_FAN_OFF) ? ctrl_cfg.cmd.cmd_off
320 					 : ctrl_cfg.cmd.cmd_auto;
321 	fanstate = state;
322 
323 	ec_write(ctrl_cfg.fanreg, cmd);
324 
325 	if (ctrl_cfg.mcmd_enable && state == ACERHDF_FAN_OFF) {
326 		if (verbose)
327 			pr_notice("turning off fan manually\n");
328 		ec_write(mcmd.mreg, mcmd.moff);
329 	}
330 }
331 
332 static void acerhdf_check_param(struct thermal_zone_device *thermal)
333 {
334 	if (fanon > ACERHDF_MAX_FANON) {
335 		pr_err("fanon temperature too high, set to %d\n",
336 		       ACERHDF_MAX_FANON);
337 		fanon = ACERHDF_MAX_FANON;
338 	}
339 
340 	if (fanon < fanoff) {
341 		pr_err("fanoff temperature (%d) is above fanon temperature (%d), clamping to %d\n",
342 		       fanoff, fanon, fanon);
343 		fanoff = fanon;
344 	};
345 
346 	trips[0].temperature = fanon;
347 	trips[0].hysteresis  = fanon - fanoff;
348 
349 	if (kernelmode && prev_interval != interval) {
350 		if (interval > ACERHDF_MAX_INTERVAL) {
351 			pr_err("interval too high, set to %d\n",
352 			       ACERHDF_MAX_INTERVAL);
353 			interval = ACERHDF_MAX_INTERVAL;
354 		}
355 		if (verbose)
356 			pr_notice("interval changed to: %d\n", interval);
357 
358 		if (thermal)
359 			thermal->polling_delay_jiffies =
360 				round_jiffies(msecs_to_jiffies(interval * 1000));
361 
362 		prev_interval = interval;
363 	}
364 }
365 
366 /*
367  * This is the thermal zone callback which does the delayed polling of the fan
368  * state. We do check /sysfs-originating settings here in acerhdf_check_param()
369  * as late as the polling interval is since we can't do that in the respective
370  * accessors of the module parameters.
371  */
372 static int acerhdf_get_ec_temp(struct thermal_zone_device *thermal, int *t)
373 {
374 	int temp, err = 0;
375 
376 	err = acerhdf_get_temp(&temp);
377 	if (err)
378 		return err;
379 
380 	if (verbose)
381 		pr_notice("temp %d\n", temp);
382 
383 	*t = temp;
384 	return 0;
385 }
386 
387 static int acerhdf_bind(struct thermal_zone_device *thermal,
388 			struct thermal_cooling_device *cdev)
389 {
390 	/* if the cooling device is the one from acerhdf bind it */
391 	if (cdev != cl_dev)
392 		return 0;
393 
394 	if (thermal_zone_bind_cooling_device(thermal, 0, cdev,
395 			THERMAL_NO_LIMIT, THERMAL_NO_LIMIT,
396 			THERMAL_WEIGHT_DEFAULT)) {
397 		pr_err("error binding cooling dev\n");
398 		return -EINVAL;
399 	}
400 	return 0;
401 }
402 
403 static int acerhdf_unbind(struct thermal_zone_device *thermal,
404 			  struct thermal_cooling_device *cdev)
405 {
406 	if (cdev != cl_dev)
407 		return 0;
408 
409 	if (thermal_zone_unbind_cooling_device(thermal, 0, cdev)) {
410 		pr_err("error unbinding cooling dev\n");
411 		return -EINVAL;
412 	}
413 	return 0;
414 }
415 
416 static inline void acerhdf_revert_to_bios_mode(void)
417 {
418 	acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
419 	kernelmode = 0;
420 
421 	pr_notice("kernel mode fan control OFF\n");
422 }
423 static inline void acerhdf_enable_kernelmode(void)
424 {
425 	kernelmode = 1;
426 
427 	pr_notice("kernel mode fan control ON\n");
428 }
429 
430 /*
431  * set operation mode;
432  * enabled: the thermal layer of the kernel takes care about
433  *          the temperature and the fan.
434  * disabled: the BIOS takes control of the fan.
435  */
436 static int acerhdf_change_mode(struct thermal_zone_device *thermal,
437 			       enum thermal_device_mode mode)
438 {
439 	if (mode == THERMAL_DEVICE_DISABLED && kernelmode)
440 		acerhdf_revert_to_bios_mode();
441 	else if (mode == THERMAL_DEVICE_ENABLED && !kernelmode)
442 		acerhdf_enable_kernelmode();
443 
444 	return 0;
445 }
446 
447 static int acerhdf_get_crit_temp(struct thermal_zone_device *thermal,
448 				 int *temperature)
449 {
450 	*temperature = ACERHDF_TEMP_CRIT;
451 	return 0;
452 }
453 
454 /* bind callback functions to thermalzone */
455 static struct thermal_zone_device_ops acerhdf_dev_ops = {
456 	.bind = acerhdf_bind,
457 	.unbind = acerhdf_unbind,
458 	.get_temp = acerhdf_get_ec_temp,
459 	.change_mode = acerhdf_change_mode,
460 	.get_crit_temp = acerhdf_get_crit_temp,
461 };
462 
463 /*
464  * cooling device callback functions
465  * get maximal fan cooling state
466  */
467 static int acerhdf_get_max_state(struct thermal_cooling_device *cdev,
468 				 unsigned long *state)
469 {
470 	*state = 1;
471 
472 	return 0;
473 }
474 
475 static int acerhdf_get_cur_state(struct thermal_cooling_device *cdev,
476 				 unsigned long *state)
477 {
478 	int err = 0, tmp;
479 
480 	err = acerhdf_get_fanstate(&tmp);
481 	if (err)
482 		return err;
483 
484 	*state = (tmp == ACERHDF_FAN_AUTO) ? 1 : 0;
485 	return 0;
486 }
487 
488 /* change current fan state - is overwritten when running in kernel mode */
489 static int acerhdf_set_cur_state(struct thermal_cooling_device *cdev,
490 				 unsigned long state)
491 {
492 	int cur_temp, cur_state, err = 0;
493 
494 	if (!kernelmode)
495 		return 0;
496 
497 	err = acerhdf_get_temp(&cur_temp);
498 	if (err) {
499 		pr_err("error reading temperature, hand off control to BIOS\n");
500 		goto err_out;
501 	}
502 
503 	err = acerhdf_get_fanstate(&cur_state);
504 	if (err) {
505 		pr_err("error reading fan state, hand off control to BIOS\n");
506 		goto err_out;
507 	}
508 
509 	if (state == 0) {
510 		if (cur_state == ACERHDF_FAN_AUTO)
511 			acerhdf_change_fanstate(ACERHDF_FAN_OFF);
512 	} else {
513 		if (cur_state == ACERHDF_FAN_OFF)
514 			acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
515 	}
516 	return 0;
517 
518 err_out:
519 	acerhdf_revert_to_bios_mode();
520 	return -EINVAL;
521 }
522 
523 /* bind fan callbacks to fan device */
524 static const struct thermal_cooling_device_ops acerhdf_cooling_ops = {
525 	.get_max_state = acerhdf_get_max_state,
526 	.get_cur_state = acerhdf_get_cur_state,
527 	.set_cur_state = acerhdf_set_cur_state,
528 };
529 
530 /* suspend / resume functionality */
531 static int acerhdf_suspend(struct device *dev)
532 {
533 	if (kernelmode)
534 		acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
535 
536 	if (verbose)
537 		pr_notice("going suspend\n");
538 
539 	return 0;
540 }
541 
542 static int acerhdf_probe(struct platform_device *device)
543 {
544 	return 0;
545 }
546 
547 static const struct dev_pm_ops acerhdf_pm_ops = {
548 	.suspend = acerhdf_suspend,
549 	.freeze  = acerhdf_suspend,
550 };
551 
552 static struct platform_driver acerhdf_driver = {
553 	.driver = {
554 		.name  = "acerhdf",
555 		.pm    = &acerhdf_pm_ops,
556 	},
557 	.probe = acerhdf_probe,
558 };
559 
560 /* check hardware */
561 static int __init acerhdf_check_hardware(void)
562 {
563 	char const *vendor, *version, *product;
564 	const struct bios_settings *bt = NULL;
565 	int found = 0;
566 
567 	/* get BIOS data */
568 	vendor  = dmi_get_system_info(DMI_SYS_VENDOR);
569 	version = dmi_get_system_info(DMI_BIOS_VERSION);
570 	product = dmi_get_system_info(DMI_PRODUCT_NAME);
571 
572 	if (!vendor || !version || !product) {
573 		pr_err("error getting hardware information\n");
574 		return -EINVAL;
575 	}
576 
577 	pr_info("Acer Aspire One Fan driver, v.%s\n", DRV_VER);
578 
579 	if (list_supported) {
580 		pr_info("List of supported Manufacturer/Model/BIOS:\n");
581 		pr_info("---------------------------------------------------\n");
582 		for (bt = bios_tbl; bt->vendor[0]; bt++) {
583 			pr_info("%-13s | %-17s | %-10s\n", bt->vendor,
584 				bt->product, bt->version);
585 		}
586 		pr_info("---------------------------------------------------\n");
587 		return -ECANCELED;
588 	}
589 
590 	if (force_bios[0]) {
591 		version = force_bios;
592 		pr_info("forcing BIOS version: %s\n", version);
593 		kernelmode = 0;
594 	}
595 
596 	if (force_product[0]) {
597 		product = force_product;
598 		pr_info("forcing BIOS product: %s\n", product);
599 		kernelmode = 0;
600 	}
601 
602 	if (verbose)
603 		pr_info("BIOS info: %s %s, product: %s\n",
604 			vendor, version, product);
605 
606 	/* search BIOS version and vendor in BIOS settings table */
607 	for (bt = bios_tbl; bt->vendor[0]; bt++) {
608 		/*
609 		 * check if actual hardware BIOS vendor, product and version
610 		 * IDs start with the strings of BIOS table entry
611 		 */
612 		if (strstarts(vendor, bt->vendor) &&
613 		    strstarts(product, bt->product) &&
614 		    strstarts(version, bt->version)) {
615 			found = 1;
616 			break;
617 		}
618 	}
619 
620 	if (!found) {
621 		pr_err("unknown (unsupported) BIOS version %s/%s/%s, please report, aborting!\n",
622 		       vendor, product, version);
623 		return -EINVAL;
624 	}
625 
626 	/* Copy control settings from BIOS table before we free it. */
627 	ctrl_cfg.fanreg = bt->fanreg;
628 	ctrl_cfg.tempreg = bt->tempreg;
629 	memcpy(&ctrl_cfg.cmd, &bt->cmd, sizeof(struct fancmd));
630 	ctrl_cfg.mcmd_enable = bt->mcmd_enable;
631 
632 	/*
633 	 * if started with kernel mode off, prevent the kernel from switching
634 	 * off the fan
635 	 */
636 	if (!kernelmode) {
637 		pr_notice("Fan control off, to enable do:\n");
638 		pr_notice("echo -n \"enabled\" > /sys/class/thermal/thermal_zoneN/mode # N=0,1,2...\n");
639 	}
640 
641 	return 0;
642 }
643 
644 static int __init acerhdf_register_platform(void)
645 {
646 	int err = 0;
647 
648 	err = platform_driver_register(&acerhdf_driver);
649 	if (err)
650 		return err;
651 
652 	acerhdf_dev = platform_device_alloc("acerhdf", PLATFORM_DEVID_NONE);
653 	if (!acerhdf_dev) {
654 		err = -ENOMEM;
655 		goto err_device_alloc;
656 	}
657 	err = platform_device_add(acerhdf_dev);
658 	if (err)
659 		goto err_device_add;
660 
661 	return 0;
662 
663 err_device_add:
664 	platform_device_put(acerhdf_dev);
665 err_device_alloc:
666 	platform_driver_unregister(&acerhdf_driver);
667 	return err;
668 }
669 
670 static void acerhdf_unregister_platform(void)
671 {
672 	platform_device_unregister(acerhdf_dev);
673 	platform_driver_unregister(&acerhdf_driver);
674 }
675 
676 static int __init acerhdf_register_thermal(void)
677 {
678 	int ret;
679 
680 	cl_dev = thermal_cooling_device_register("acerhdf-fan", NULL,
681 						 &acerhdf_cooling_ops);
682 
683 	if (IS_ERR(cl_dev))
684 		return -EINVAL;
685 
686 	thz_dev = thermal_zone_device_register_with_trips("acerhdf", trips, ARRAY_SIZE(trips),
687 							  0, NULL, &acerhdf_dev_ops,
688 							  &acerhdf_zone_params, 0,
689 							  (kernelmode) ? interval*1000 : 0);
690 	if (IS_ERR(thz_dev))
691 		return -EINVAL;
692 
693 	if (kernelmode)
694 		ret = thermal_zone_device_enable(thz_dev);
695 	else
696 		ret = thermal_zone_device_disable(thz_dev);
697 	if (ret)
698 		return ret;
699 
700 	if (strcmp(thz_dev->governor->name,
701 				acerhdf_zone_params.governor_name)) {
702 		pr_err("Didn't get thermal governor %s, perhaps not compiled into thermal subsystem.\n",
703 				acerhdf_zone_params.governor_name);
704 		return -EINVAL;
705 	}
706 
707 	return 0;
708 }
709 
710 static void acerhdf_unregister_thermal(void)
711 {
712 	if (cl_dev) {
713 		thermal_cooling_device_unregister(cl_dev);
714 		cl_dev = NULL;
715 	}
716 
717 	if (thz_dev) {
718 		thermal_zone_device_unregister(thz_dev);
719 		thz_dev = NULL;
720 	}
721 }
722 
723 static int __init acerhdf_init(void)
724 {
725 	int err = 0;
726 
727 	err = acerhdf_check_hardware();
728 	if (err)
729 		goto out_err;
730 
731 	err = acerhdf_register_platform();
732 	if (err)
733 		goto out_err;
734 
735 	err = acerhdf_register_thermal();
736 	if (err)
737 		goto err_unreg;
738 
739 	return 0;
740 
741 err_unreg:
742 	acerhdf_unregister_thermal();
743 	acerhdf_unregister_platform();
744 
745 out_err:
746 	return err;
747 }
748 
749 static void __exit acerhdf_exit(void)
750 {
751 	acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
752 	acerhdf_unregister_thermal();
753 	acerhdf_unregister_platform();
754 }
755 
756 MODULE_LICENSE("GPL");
757 MODULE_AUTHOR("Peter Kaestle");
758 MODULE_DESCRIPTION("Aspire One temperature and fan driver");
759 MODULE_ALIAS("dmi:*:*Acer*:pnAOA*:");
760 MODULE_ALIAS("dmi:*:*Acer*:pnAO751h*:");
761 MODULE_ALIAS("dmi:*:*Acer*:pnAspire*1410*:");
762 MODULE_ALIAS("dmi:*:*Acer*:pnAspire*1810*:");
763 MODULE_ALIAS("dmi:*:*Acer*:pnAspire*5755G:");
764 MODULE_ALIAS("dmi:*:*Acer*:pnAspire*1825PTZ:");
765 MODULE_ALIAS("dmi:*:*Acer*:pnAO521*:");
766 MODULE_ALIAS("dmi:*:*Acer*:pnAO531*:");
767 MODULE_ALIAS("dmi:*:*Acer*:pnAspire*5739G:");
768 MODULE_ALIAS("dmi:*:*Acer*:pnAspire*One*753:");
769 MODULE_ALIAS("dmi:*:*Acer*:pnAspire*5315:");
770 MODULE_ALIAS("dmi:*:*Acer*:TravelMate*7730G:");
771 MODULE_ALIAS("dmi:*:*Acer*:pnAspire*7551:");
772 MODULE_ALIAS("dmi:*:*Acer*:TM8573T:");
773 MODULE_ALIAS("dmi:*:*Gateway*:pnAOA*:");
774 MODULE_ALIAS("dmi:*:*Gateway*:pnLT31*:");
775 MODULE_ALIAS("dmi:*:*Packard*Bell*:pnAOA*:");
776 MODULE_ALIAS("dmi:*:*Packard*Bell*:pnDOA*:");
777 MODULE_ALIAS("dmi:*:*Packard*Bell*:pnDOTMU*:");
778 MODULE_ALIAS("dmi:*:*Packard*Bell*:pnENBFT*:");
779 MODULE_ALIAS("dmi:*:*Packard*Bell*:pnDOTMA*:");
780 MODULE_ALIAS("dmi:*:*Packard*Bell*:pnDOTVR46*:");
781 MODULE_ALIAS("dmi:*:*Acer*:pnExtensa*5420*:");
782 
783 module_init(acerhdf_init);
784 module_exit(acerhdf_exit);
785 
786 static int interval_set_uint(const char *val, const struct kernel_param *kp)
787 {
788 	int ret;
789 
790 	ret = param_set_uint(val, kp);
791 	if (ret)
792 		return ret;
793 
794 	acerhdf_check_param(thz_dev);
795 
796 	return 0;
797 }
798 
799 static const struct kernel_param_ops interval_ops = {
800 	.set = interval_set_uint,
801 	.get = param_get_uint,
802 };
803 
804 module_param_cb(interval, &interval_ops, &interval, 0600);
805 MODULE_PARM_DESC(interval, "Polling interval of temperature check");
806