1# SPDX-License-Identifier: GPL-2.0 2# 3# PCI Express Port Bus Configuration 4# 5config PCIEPORTBUS 6 bool "PCI Express Port Bus support" 7 help 8 This enables PCI Express Port Bus support. Users can then enable 9 support for Native Hot-Plug, Advanced Error Reporting, Power 10 Management Events, and Downstream Port Containment. 11 12# 13# Include service Kconfig here 14# 15config HOTPLUG_PCI_PCIE 16 bool "PCI Express Hotplug driver" 17 depends on HOTPLUG_PCI && PCIEPORTBUS 18 help 19 Say Y here if you have a motherboard that supports PCI Express Native 20 Hotplug 21 22 When in doubt, say N. 23 24config PCIEAER 25 bool "PCI Express Advanced Error Reporting support" 26 depends on PCIEPORTBUS 27 select RAS 28 default y 29 help 30 This enables PCI Express Root Port Advanced Error Reporting 31 (AER) driver support. Error reporting messages sent to Root 32 Port will be handled by PCI Express AER driver. 33 34config PCIEAER_INJECT 35 tristate "PCI Express error injection support" 36 depends on PCIEAER 37 help 38 This enables PCI Express Root Port Advanced Error Reporting 39 (AER) software error injector. 40 41 Debugging AER code is quite difficult because it is hard 42 to trigger various real hardware errors. Software-based 43 error injection can fake almost all kinds of errors with the 44 help of a user space helper tool aer-inject, which can be 45 gotten from: 46 http://www.kernel.org/pub/linux/utils/pci/aer-inject/ 47 48# 49# PCI Express ECRC 50# 51config PCIE_ECRC 52 bool "PCI Express ECRC settings control" 53 depends on PCIEAER 54 help 55 Used to override firmware/bios settings for PCI Express ECRC 56 (transaction layer end-to-end CRC checking). 57 58 When in doubt, say N. 59 60# 61# PCI Express ASPM 62# 63config PCIEASPM 64 bool "PCI Express ASPM control" if EXPERT 65 default y 66 help 67 This enables OS control over PCI Express ASPM (Active State 68 Power Management) and Clock Power Management. ASPM supports 69 state L0/L0s/L1. 70 71 ASPM is initially set up by the firmware. With this option enabled, 72 Linux can modify this state in order to disable ASPM on known-bad 73 hardware or configurations and enable it when known-safe. 74 75 ASPM can be disabled or enabled at runtime via 76 /sys/module/pcie_aspm/parameters/policy 77 78 When in doubt, say Y. 79 80choice 81 prompt "Default ASPM policy" 82 default PCIEASPM_DEFAULT 83 depends on PCIEASPM 84 85config PCIEASPM_DEFAULT 86 bool "BIOS default" 87 depends on PCIEASPM 88 help 89 Use the BIOS defaults for PCI Express ASPM. 90 91config PCIEASPM_POWERSAVE 92 bool "Powersave" 93 depends on PCIEASPM 94 help 95 Enable PCI Express ASPM L0s and L1 where possible, even if the 96 BIOS did not. 97 98config PCIEASPM_POWER_SUPERSAVE 99 bool "Power Supersave" 100 depends on PCIEASPM 101 help 102 Same as PCIEASPM_POWERSAVE, except it also enables L1 substates where 103 possible. This would result in higher power savings while staying in L1 104 where the components support it. 105 106config PCIEASPM_PERFORMANCE 107 bool "Performance" 108 depends on PCIEASPM 109 help 110 Disable PCI Express ASPM L0s and L1, even if the BIOS enabled them. 111endchoice 112 113config PCIE_PME 114 def_bool y 115 depends on PCIEPORTBUS && PM 116 117config PCIE_DPC 118 bool "PCI Express Downstream Port Containment support" 119 depends on PCIEPORTBUS && PCIEAER 120 help 121 This enables PCI Express Downstream Port Containment (DPC) 122 driver support. DPC events from Root and Downstream ports 123 will be handled by the DPC driver. If your system doesn't 124 have this capability or you do not want to use this feature, 125 it is safe to answer N. 126 127config PCIE_PTM 128 bool "PCI Express Precision Time Measurement support" 129 help 130 This enables PCI Express Precision Time Measurement (PTM) 131 support. 132 133 This is only useful if you have devices that support PTM, but it 134 is safe to enable even if you don't. 135 136config PCIE_BW 137 bool "PCI Express Bandwidth Change Notification" 138 depends on PCIEPORTBUS 139 help 140 This enables PCI Express Bandwidth Change Notification. If 141 you know link width or rate changes occur only to correct 142 unreliable links, you may answer Y. 143