1 // SPDX-License-Identifier: GPL-2.0 2 /* NXP TJA1100 BroadRReach PHY driver 3 * 4 * Copyright (C) 2018 Marek Vasut <marex@denx.de> 5 */ 6 #include <linux/delay.h> 7 #include <linux/ethtool.h> 8 #include <linux/ethtool_netlink.h> 9 #include <linux/kernel.h> 10 #include <linux/mdio.h> 11 #include <linux/mii.h> 12 #include <linux/module.h> 13 #include <linux/of.h> 14 #include <linux/phy.h> 15 #include <linux/hwmon.h> 16 #include <linux/bitfield.h> 17 #include <linux/of_mdio.h> 18 #include <linux/of_irq.h> 19 20 #define PHY_ID_MASK 0xfffffff0 21 #define PHY_ID_TJA1100 0x0180dc40 22 #define PHY_ID_TJA1101 0x0180dd00 23 #define PHY_ID_TJA1102 0x0180dc80 24 25 #define MII_ECTRL 17 26 #define MII_ECTRL_LINK_CONTROL BIT(15) 27 #define MII_ECTRL_POWER_MODE_MASK GENMASK(14, 11) 28 #define MII_ECTRL_POWER_MODE_NO_CHANGE (0x0 << 11) 29 #define MII_ECTRL_POWER_MODE_NORMAL (0x3 << 11) 30 #define MII_ECTRL_POWER_MODE_STANDBY (0xc << 11) 31 #define MII_ECTRL_CABLE_TEST BIT(5) 32 #define MII_ECTRL_CONFIG_EN BIT(2) 33 #define MII_ECTRL_WAKE_REQUEST BIT(0) 34 35 #define MII_CFG1 18 36 #define MII_CFG1_MASTER_SLAVE BIT(15) 37 #define MII_CFG1_AUTO_OP BIT(14) 38 #define MII_CFG1_INTERFACE_MODE_MASK GENMASK(9, 8) 39 #define MII_CFG1_MII_MODE (0x0 << 8) 40 #define MII_CFG1_RMII_MODE_REFCLK_IN BIT(8) 41 #define MII_CFG1_RMII_MODE_REFCLK_OUT BIT(9) 42 #define MII_CFG1_REVMII_MODE GENMASK(9, 8) 43 #define MII_CFG1_SLEEP_CONFIRM BIT(6) 44 #define MII_CFG1_LED_MODE_MASK GENMASK(5, 4) 45 #define MII_CFG1_LED_MODE_LINKUP 0 46 #define MII_CFG1_LED_ENABLE BIT(3) 47 48 #define MII_CFG2 19 49 #define MII_CFG2_SLEEP_REQUEST_TO GENMASK(1, 0) 50 #define MII_CFG2_SLEEP_REQUEST_TO_16MS 0x3 51 52 #define MII_INTSRC 21 53 #define MII_INTSRC_LINK_FAIL BIT(10) 54 #define MII_INTSRC_LINK_UP BIT(9) 55 #define MII_INTSRC_MASK (MII_INTSRC_LINK_FAIL | MII_INTSRC_LINK_UP) 56 #define MII_INTSRC_UV_ERR BIT(3) 57 #define MII_INTSRC_TEMP_ERR BIT(1) 58 59 #define MII_INTEN 22 60 #define MII_INTEN_LINK_FAIL BIT(10) 61 #define MII_INTEN_LINK_UP BIT(9) 62 #define MII_INTEN_UV_ERR BIT(3) 63 #define MII_INTEN_TEMP_ERR BIT(1) 64 65 #define MII_COMMSTAT 23 66 #define MII_COMMSTAT_LINK_UP BIT(15) 67 #define MII_COMMSTAT_SQI_STATE GENMASK(7, 5) 68 #define MII_COMMSTAT_SQI_MAX 7 69 70 #define MII_GENSTAT 24 71 #define MII_GENSTAT_PLL_LOCKED BIT(14) 72 73 #define MII_EXTSTAT 25 74 #define MII_EXTSTAT_SHORT_DETECT BIT(8) 75 #define MII_EXTSTAT_OPEN_DETECT BIT(7) 76 #define MII_EXTSTAT_POLARITY_DETECT BIT(6) 77 78 #define MII_COMMCFG 27 79 #define MII_COMMCFG_AUTO_OP BIT(15) 80 81 /* Configure REF_CLK as input in RMII mode */ 82 #define TJA110X_RMII_MODE_REFCLK_IN BIT(0) 83 84 struct tja11xx_priv { 85 char *hwmon_name; 86 struct device *hwmon_dev; 87 struct phy_device *phydev; 88 struct work_struct phy_register_work; 89 u32 flags; 90 }; 91 92 struct tja11xx_phy_stats { 93 const char *string; 94 u8 reg; 95 u8 off; 96 u16 mask; 97 }; 98 99 static struct tja11xx_phy_stats tja11xx_hw_stats[] = { 100 { "phy_symbol_error_count", 20, 0, GENMASK(15, 0) }, 101 { "phy_polarity_detect", 25, 6, BIT(6) }, 102 { "phy_open_detect", 25, 7, BIT(7) }, 103 { "phy_short_detect", 25, 8, BIT(8) }, 104 { "phy_rem_rcvr_count", 26, 0, GENMASK(7, 0) }, 105 { "phy_loc_rcvr_count", 26, 8, GENMASK(15, 8) }, 106 }; 107 108 static int tja11xx_check(struct phy_device *phydev, u8 reg, u16 mask, u16 set) 109 { 110 int val; 111 112 return phy_read_poll_timeout(phydev, reg, val, (val & mask) == set, 113 150, 30000, false); 114 } 115 116 static int phy_modify_check(struct phy_device *phydev, u8 reg, 117 u16 mask, u16 set) 118 { 119 int ret; 120 121 ret = phy_modify(phydev, reg, mask, set); 122 if (ret) 123 return ret; 124 125 return tja11xx_check(phydev, reg, mask, set); 126 } 127 128 static int tja11xx_enable_reg_write(struct phy_device *phydev) 129 { 130 return phy_set_bits(phydev, MII_ECTRL, MII_ECTRL_CONFIG_EN); 131 } 132 133 static int tja11xx_enable_link_control(struct phy_device *phydev) 134 { 135 return phy_set_bits(phydev, MII_ECTRL, MII_ECTRL_LINK_CONTROL); 136 } 137 138 static int tja11xx_disable_link_control(struct phy_device *phydev) 139 { 140 return phy_clear_bits(phydev, MII_ECTRL, MII_ECTRL_LINK_CONTROL); 141 } 142 143 static int tja11xx_wakeup(struct phy_device *phydev) 144 { 145 int ret; 146 147 ret = phy_read(phydev, MII_ECTRL); 148 if (ret < 0) 149 return ret; 150 151 switch (ret & MII_ECTRL_POWER_MODE_MASK) { 152 case MII_ECTRL_POWER_MODE_NO_CHANGE: 153 break; 154 case MII_ECTRL_POWER_MODE_NORMAL: 155 ret = phy_set_bits(phydev, MII_ECTRL, MII_ECTRL_WAKE_REQUEST); 156 if (ret) 157 return ret; 158 159 ret = phy_clear_bits(phydev, MII_ECTRL, MII_ECTRL_WAKE_REQUEST); 160 if (ret) 161 return ret; 162 break; 163 case MII_ECTRL_POWER_MODE_STANDBY: 164 ret = phy_modify_check(phydev, MII_ECTRL, 165 MII_ECTRL_POWER_MODE_MASK, 166 MII_ECTRL_POWER_MODE_STANDBY); 167 if (ret) 168 return ret; 169 170 ret = phy_modify(phydev, MII_ECTRL, MII_ECTRL_POWER_MODE_MASK, 171 MII_ECTRL_POWER_MODE_NORMAL); 172 if (ret) 173 return ret; 174 175 ret = phy_modify_check(phydev, MII_GENSTAT, 176 MII_GENSTAT_PLL_LOCKED, 177 MII_GENSTAT_PLL_LOCKED); 178 if (ret) 179 return ret; 180 181 return tja11xx_enable_link_control(phydev); 182 default: 183 break; 184 } 185 186 return 0; 187 } 188 189 static int tja11xx_soft_reset(struct phy_device *phydev) 190 { 191 int ret; 192 193 ret = tja11xx_enable_reg_write(phydev); 194 if (ret) 195 return ret; 196 197 return genphy_soft_reset(phydev); 198 } 199 200 static int tja11xx_config_aneg_cable_test(struct phy_device *phydev) 201 { 202 bool finished = false; 203 int ret; 204 205 if (phydev->link) 206 return 0; 207 208 if (!phydev->drv->cable_test_start || 209 !phydev->drv->cable_test_get_status) 210 return 0; 211 212 ret = ethnl_cable_test_alloc(phydev, ETHTOOL_MSG_CABLE_TEST_NTF); 213 if (ret) 214 return ret; 215 216 ret = phydev->drv->cable_test_start(phydev); 217 if (ret) 218 return ret; 219 220 /* According to the documentation this test takes 100 usec */ 221 usleep_range(100, 200); 222 223 ret = phydev->drv->cable_test_get_status(phydev, &finished); 224 if (ret) 225 return ret; 226 227 if (finished) 228 ethnl_cable_test_finished(phydev); 229 230 return 0; 231 } 232 233 static int tja11xx_config_aneg(struct phy_device *phydev) 234 { 235 int ret, changed = 0; 236 u16 ctl = 0; 237 238 switch (phydev->master_slave_set) { 239 case MASTER_SLAVE_CFG_MASTER_FORCE: 240 ctl |= MII_CFG1_MASTER_SLAVE; 241 break; 242 case MASTER_SLAVE_CFG_SLAVE_FORCE: 243 break; 244 case MASTER_SLAVE_CFG_UNKNOWN: 245 case MASTER_SLAVE_CFG_UNSUPPORTED: 246 goto do_test; 247 default: 248 phydev_warn(phydev, "Unsupported Master/Slave mode\n"); 249 return -ENOTSUPP; 250 } 251 252 changed = phy_modify_changed(phydev, MII_CFG1, MII_CFG1_MASTER_SLAVE, ctl); 253 if (changed < 0) 254 return changed; 255 256 do_test: 257 ret = tja11xx_config_aneg_cable_test(phydev); 258 if (ret) 259 return ret; 260 261 return __genphy_config_aneg(phydev, changed); 262 } 263 264 static int tja11xx_get_interface_mode(struct phy_device *phydev) 265 { 266 struct tja11xx_priv *priv = phydev->priv; 267 int mii_mode; 268 269 switch (phydev->interface) { 270 case PHY_INTERFACE_MODE_MII: 271 mii_mode = MII_CFG1_MII_MODE; 272 break; 273 case PHY_INTERFACE_MODE_REVMII: 274 mii_mode = MII_CFG1_REVMII_MODE; 275 break; 276 case PHY_INTERFACE_MODE_RMII: 277 if (priv->flags & TJA110X_RMII_MODE_REFCLK_IN) 278 mii_mode = MII_CFG1_RMII_MODE_REFCLK_IN; 279 else 280 mii_mode = MII_CFG1_RMII_MODE_REFCLK_OUT; 281 break; 282 default: 283 return -EINVAL; 284 } 285 286 return mii_mode; 287 } 288 289 static int tja11xx_config_init(struct phy_device *phydev) 290 { 291 u16 reg_mask, reg_val; 292 int ret; 293 294 ret = tja11xx_enable_reg_write(phydev); 295 if (ret) 296 return ret; 297 298 phydev->autoneg = AUTONEG_DISABLE; 299 phydev->speed = SPEED_100; 300 phydev->duplex = DUPLEX_FULL; 301 302 switch (phydev->phy_id & PHY_ID_MASK) { 303 case PHY_ID_TJA1100: 304 reg_mask = MII_CFG1_AUTO_OP | MII_CFG1_LED_MODE_MASK | 305 MII_CFG1_LED_ENABLE; 306 reg_val = MII_CFG1_AUTO_OP | MII_CFG1_LED_MODE_LINKUP | 307 MII_CFG1_LED_ENABLE; 308 309 reg_mask |= MII_CFG1_INTERFACE_MODE_MASK; 310 ret = tja11xx_get_interface_mode(phydev); 311 if (ret < 0) 312 return ret; 313 314 reg_val |= (ret & 0xffff); 315 ret = phy_modify(phydev, MII_CFG1, reg_mask, reg_val); 316 if (ret) 317 return ret; 318 break; 319 case PHY_ID_TJA1101: 320 reg_mask = MII_CFG1_INTERFACE_MODE_MASK; 321 ret = tja11xx_get_interface_mode(phydev); 322 if (ret < 0) 323 return ret; 324 325 reg_val = ret & 0xffff; 326 ret = phy_modify(phydev, MII_CFG1, reg_mask, reg_val); 327 if (ret) 328 return ret; 329 fallthrough; 330 case PHY_ID_TJA1102: 331 ret = phy_set_bits(phydev, MII_COMMCFG, MII_COMMCFG_AUTO_OP); 332 if (ret) 333 return ret; 334 break; 335 default: 336 return -EINVAL; 337 } 338 339 ret = phy_clear_bits(phydev, MII_CFG1, MII_CFG1_SLEEP_CONFIRM); 340 if (ret) 341 return ret; 342 343 ret = phy_modify(phydev, MII_CFG2, MII_CFG2_SLEEP_REQUEST_TO, 344 MII_CFG2_SLEEP_REQUEST_TO_16MS); 345 if (ret) 346 return ret; 347 348 ret = tja11xx_wakeup(phydev); 349 if (ret < 0) 350 return ret; 351 352 /* ACK interrupts by reading the status register */ 353 ret = phy_read(phydev, MII_INTSRC); 354 if (ret < 0) 355 return ret; 356 357 return 0; 358 } 359 360 static int tja11xx_read_status(struct phy_device *phydev) 361 { 362 int ret; 363 364 phydev->master_slave_get = MASTER_SLAVE_CFG_UNKNOWN; 365 phydev->master_slave_state = MASTER_SLAVE_STATE_UNSUPPORTED; 366 367 ret = genphy_update_link(phydev); 368 if (ret) 369 return ret; 370 371 ret = phy_read(phydev, MII_CFG1); 372 if (ret < 0) 373 return ret; 374 375 if (ret & MII_CFG1_MASTER_SLAVE) 376 phydev->master_slave_get = MASTER_SLAVE_CFG_MASTER_FORCE; 377 else 378 phydev->master_slave_get = MASTER_SLAVE_CFG_SLAVE_FORCE; 379 380 if (phydev->link) { 381 ret = phy_read(phydev, MII_COMMSTAT); 382 if (ret < 0) 383 return ret; 384 385 if (!(ret & MII_COMMSTAT_LINK_UP)) 386 phydev->link = 0; 387 } 388 389 return 0; 390 } 391 392 static int tja11xx_get_sqi(struct phy_device *phydev) 393 { 394 int ret; 395 396 ret = phy_read(phydev, MII_COMMSTAT); 397 if (ret < 0) 398 return ret; 399 400 return FIELD_GET(MII_COMMSTAT_SQI_STATE, ret); 401 } 402 403 static int tja11xx_get_sqi_max(struct phy_device *phydev) 404 { 405 return MII_COMMSTAT_SQI_MAX; 406 } 407 408 static int tja11xx_get_sset_count(struct phy_device *phydev) 409 { 410 return ARRAY_SIZE(tja11xx_hw_stats); 411 } 412 413 static void tja11xx_get_strings(struct phy_device *phydev, u8 *data) 414 { 415 int i; 416 417 for (i = 0; i < ARRAY_SIZE(tja11xx_hw_stats); i++) { 418 strncpy(data + i * ETH_GSTRING_LEN, 419 tja11xx_hw_stats[i].string, ETH_GSTRING_LEN); 420 } 421 } 422 423 static void tja11xx_get_stats(struct phy_device *phydev, 424 struct ethtool_stats *stats, u64 *data) 425 { 426 int i, ret; 427 428 for (i = 0; i < ARRAY_SIZE(tja11xx_hw_stats); i++) { 429 ret = phy_read(phydev, tja11xx_hw_stats[i].reg); 430 if (ret < 0) 431 data[i] = U64_MAX; 432 else { 433 data[i] = ret & tja11xx_hw_stats[i].mask; 434 data[i] >>= tja11xx_hw_stats[i].off; 435 } 436 } 437 } 438 439 static int tja11xx_hwmon_read(struct device *dev, 440 enum hwmon_sensor_types type, 441 u32 attr, int channel, long *value) 442 { 443 struct phy_device *phydev = dev_get_drvdata(dev); 444 int ret; 445 446 if (type == hwmon_in && attr == hwmon_in_lcrit_alarm) { 447 ret = phy_read(phydev, MII_INTSRC); 448 if (ret < 0) 449 return ret; 450 451 *value = !!(ret & MII_INTSRC_TEMP_ERR); 452 return 0; 453 } 454 455 if (type == hwmon_temp && attr == hwmon_temp_crit_alarm) { 456 ret = phy_read(phydev, MII_INTSRC); 457 if (ret < 0) 458 return ret; 459 460 *value = !!(ret & MII_INTSRC_UV_ERR); 461 return 0; 462 } 463 464 return -EOPNOTSUPP; 465 } 466 467 static umode_t tja11xx_hwmon_is_visible(const void *data, 468 enum hwmon_sensor_types type, 469 u32 attr, int channel) 470 { 471 if (type == hwmon_in && attr == hwmon_in_lcrit_alarm) 472 return 0444; 473 474 if (type == hwmon_temp && attr == hwmon_temp_crit_alarm) 475 return 0444; 476 477 return 0; 478 } 479 480 static const struct hwmon_channel_info * const tja11xx_hwmon_info[] = { 481 HWMON_CHANNEL_INFO(in, HWMON_I_LCRIT_ALARM), 482 HWMON_CHANNEL_INFO(temp, HWMON_T_CRIT_ALARM), 483 NULL 484 }; 485 486 static const struct hwmon_ops tja11xx_hwmon_hwmon_ops = { 487 .is_visible = tja11xx_hwmon_is_visible, 488 .read = tja11xx_hwmon_read, 489 }; 490 491 static const struct hwmon_chip_info tja11xx_hwmon_chip_info = { 492 .ops = &tja11xx_hwmon_hwmon_ops, 493 .info = tja11xx_hwmon_info, 494 }; 495 496 static int tja11xx_hwmon_register(struct phy_device *phydev, 497 struct tja11xx_priv *priv) 498 { 499 struct device *dev = &phydev->mdio.dev; 500 501 priv->hwmon_name = devm_hwmon_sanitize_name(dev, dev_name(dev)); 502 if (IS_ERR(priv->hwmon_name)) 503 return PTR_ERR(priv->hwmon_name); 504 505 priv->hwmon_dev = 506 devm_hwmon_device_register_with_info(dev, priv->hwmon_name, 507 phydev, 508 &tja11xx_hwmon_chip_info, 509 NULL); 510 511 return PTR_ERR_OR_ZERO(priv->hwmon_dev); 512 } 513 514 static int tja11xx_parse_dt(struct phy_device *phydev) 515 { 516 struct device_node *node = phydev->mdio.dev.of_node; 517 struct tja11xx_priv *priv = phydev->priv; 518 519 if (!IS_ENABLED(CONFIG_OF_MDIO)) 520 return 0; 521 522 if (of_property_read_bool(node, "nxp,rmii-refclk-in")) 523 priv->flags |= TJA110X_RMII_MODE_REFCLK_IN; 524 525 return 0; 526 } 527 528 static int tja11xx_probe(struct phy_device *phydev) 529 { 530 struct device *dev = &phydev->mdio.dev; 531 struct tja11xx_priv *priv; 532 int ret; 533 534 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); 535 if (!priv) 536 return -ENOMEM; 537 538 priv->phydev = phydev; 539 phydev->priv = priv; 540 541 ret = tja11xx_parse_dt(phydev); 542 if (ret) 543 return ret; 544 545 return tja11xx_hwmon_register(phydev, priv); 546 } 547 548 static void tja1102_p1_register(struct work_struct *work) 549 { 550 struct tja11xx_priv *priv = container_of(work, struct tja11xx_priv, 551 phy_register_work); 552 struct phy_device *phydev_phy0 = priv->phydev; 553 struct mii_bus *bus = phydev_phy0->mdio.bus; 554 struct device *dev = &phydev_phy0->mdio.dev; 555 struct device_node *np = dev->of_node; 556 struct device_node *child; 557 int ret; 558 559 for_each_available_child_of_node(np, child) { 560 struct phy_device *phy; 561 int addr; 562 563 addr = of_mdio_parse_addr(dev, child); 564 if (addr < 0) { 565 dev_err(dev, "Can't parse addr\n"); 566 continue; 567 } else if (addr != phydev_phy0->mdio.addr + 1) { 568 /* Currently we care only about double PHY chip TJA1102. 569 * If some day NXP will decide to bring chips with more 570 * PHYs, this logic should be reworked. 571 */ 572 dev_err(dev, "Unexpected address. Should be: %i\n", 573 phydev_phy0->mdio.addr + 1); 574 continue; 575 } 576 577 if (mdiobus_is_registered_device(bus, addr)) { 578 dev_err(dev, "device is already registered\n"); 579 continue; 580 } 581 582 /* Real PHY ID of Port 1 is 0 */ 583 phy = phy_device_create(bus, addr, PHY_ID_TJA1102, false, NULL); 584 if (IS_ERR(phy)) { 585 dev_err(dev, "Can't create PHY device for Port 1: %i\n", 586 addr); 587 continue; 588 } 589 590 /* Overwrite parent device. phy_device_create() set parent to 591 * the mii_bus->dev, which is not correct in case. 592 */ 593 phy->mdio.dev.parent = dev; 594 595 ret = of_mdiobus_phy_device_register(bus, phy, child, addr); 596 if (ret) { 597 /* All resources needed for Port 1 should be already 598 * available for Port 0. Both ports use the same 599 * interrupt line, so -EPROBE_DEFER would make no sense 600 * here. 601 */ 602 dev_err(dev, "Can't register Port 1. Unexpected error: %i\n", 603 ret); 604 phy_device_free(phy); 605 } 606 } 607 } 608 609 static int tja1102_p0_probe(struct phy_device *phydev) 610 { 611 struct device *dev = &phydev->mdio.dev; 612 struct tja11xx_priv *priv; 613 int ret; 614 615 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); 616 if (!priv) 617 return -ENOMEM; 618 619 priv->phydev = phydev; 620 INIT_WORK(&priv->phy_register_work, tja1102_p1_register); 621 622 ret = tja11xx_hwmon_register(phydev, priv); 623 if (ret) 624 return ret; 625 626 schedule_work(&priv->phy_register_work); 627 628 return 0; 629 } 630 631 static int tja1102_match_phy_device(struct phy_device *phydev, bool port0) 632 { 633 int ret; 634 635 if ((phydev->phy_id & PHY_ID_MASK) != PHY_ID_TJA1102) 636 return 0; 637 638 ret = phy_read(phydev, MII_PHYSID2); 639 if (ret < 0) 640 return ret; 641 642 /* TJA1102 Port 1 has phyid 0 and doesn't support temperature 643 * and undervoltage alarms. 644 */ 645 if (port0) 646 return ret ? 1 : 0; 647 648 return !ret; 649 } 650 651 static int tja1102_p0_match_phy_device(struct phy_device *phydev) 652 { 653 return tja1102_match_phy_device(phydev, true); 654 } 655 656 static int tja1102_p1_match_phy_device(struct phy_device *phydev) 657 { 658 return tja1102_match_phy_device(phydev, false); 659 } 660 661 static int tja11xx_ack_interrupt(struct phy_device *phydev) 662 { 663 int ret; 664 665 ret = phy_read(phydev, MII_INTSRC); 666 667 return (ret < 0) ? ret : 0; 668 } 669 670 static int tja11xx_config_intr(struct phy_device *phydev) 671 { 672 int value = 0; 673 int err; 674 675 if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { 676 err = tja11xx_ack_interrupt(phydev); 677 if (err) 678 return err; 679 680 value = MII_INTEN_LINK_FAIL | MII_INTEN_LINK_UP | 681 MII_INTEN_UV_ERR | MII_INTEN_TEMP_ERR; 682 err = phy_write(phydev, MII_INTEN, value); 683 } else { 684 err = phy_write(phydev, MII_INTEN, value); 685 if (err) 686 return err; 687 688 err = tja11xx_ack_interrupt(phydev); 689 } 690 691 return err; 692 } 693 694 static irqreturn_t tja11xx_handle_interrupt(struct phy_device *phydev) 695 { 696 struct device *dev = &phydev->mdio.dev; 697 int irq_status; 698 699 irq_status = phy_read(phydev, MII_INTSRC); 700 if (irq_status < 0) { 701 phy_error(phydev); 702 return IRQ_NONE; 703 } 704 705 if (irq_status & MII_INTSRC_TEMP_ERR) 706 dev_warn(dev, "Overtemperature error detected (temp > 155C°).\n"); 707 if (irq_status & MII_INTSRC_UV_ERR) 708 dev_warn(dev, "Undervoltage error detected.\n"); 709 710 if (!(irq_status & MII_INTSRC_MASK)) 711 return IRQ_NONE; 712 713 phy_trigger_machine(phydev); 714 715 return IRQ_HANDLED; 716 } 717 718 static int tja11xx_cable_test_start(struct phy_device *phydev) 719 { 720 int ret; 721 722 ret = phy_clear_bits(phydev, MII_COMMCFG, MII_COMMCFG_AUTO_OP); 723 if (ret) 724 return ret; 725 726 ret = tja11xx_wakeup(phydev); 727 if (ret < 0) 728 return ret; 729 730 ret = tja11xx_disable_link_control(phydev); 731 if (ret < 0) 732 return ret; 733 734 return phy_set_bits(phydev, MII_ECTRL, MII_ECTRL_CABLE_TEST); 735 } 736 737 /* 738 * | BI_DA+ | BI_DA- | Result 739 * | open | open | open 740 * | + short to - | - short to + | short 741 * | short to Vdd | open | open 742 * | open | shot to Vdd | open 743 * | short to Vdd | short to Vdd | short 744 * | shot to GND | open | open 745 * | open | shot to GND | open 746 * | short to GND | shot to GND | short 747 * | connected to active link partner (master) | shot and open 748 */ 749 static int tja11xx_cable_test_report_trans(u32 result) 750 { 751 u32 mask = MII_EXTSTAT_SHORT_DETECT | MII_EXTSTAT_OPEN_DETECT; 752 753 if ((result & mask) == mask) { 754 /* connected to active link partner (master) */ 755 return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC; 756 } else if ((result & mask) == 0) { 757 return ETHTOOL_A_CABLE_RESULT_CODE_OK; 758 } else if (result & MII_EXTSTAT_SHORT_DETECT) { 759 return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT; 760 } else if (result & MII_EXTSTAT_OPEN_DETECT) { 761 return ETHTOOL_A_CABLE_RESULT_CODE_OPEN; 762 } else { 763 return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC; 764 } 765 } 766 767 static int tja11xx_cable_test_report(struct phy_device *phydev) 768 { 769 int ret; 770 771 ret = phy_read(phydev, MII_EXTSTAT); 772 if (ret < 0) 773 return ret; 774 775 ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_A, 776 tja11xx_cable_test_report_trans(ret)); 777 778 return 0; 779 } 780 781 static int tja11xx_cable_test_get_status(struct phy_device *phydev, 782 bool *finished) 783 { 784 int ret; 785 786 *finished = false; 787 788 ret = phy_read(phydev, MII_ECTRL); 789 if (ret < 0) 790 return ret; 791 792 if (!(ret & MII_ECTRL_CABLE_TEST)) { 793 *finished = true; 794 795 ret = phy_set_bits(phydev, MII_COMMCFG, MII_COMMCFG_AUTO_OP); 796 if (ret) 797 return ret; 798 799 return tja11xx_cable_test_report(phydev); 800 } 801 802 return 0; 803 } 804 805 static struct phy_driver tja11xx_driver[] = { 806 { 807 PHY_ID_MATCH_MODEL(PHY_ID_TJA1100), 808 .name = "NXP TJA1100", 809 .features = PHY_BASIC_T1_FEATURES, 810 .probe = tja11xx_probe, 811 .soft_reset = tja11xx_soft_reset, 812 .config_aneg = tja11xx_config_aneg, 813 .config_init = tja11xx_config_init, 814 .read_status = tja11xx_read_status, 815 .get_sqi = tja11xx_get_sqi, 816 .get_sqi_max = tja11xx_get_sqi_max, 817 .suspend = genphy_suspend, 818 .resume = genphy_resume, 819 .set_loopback = genphy_loopback, 820 /* Statistics */ 821 .get_sset_count = tja11xx_get_sset_count, 822 .get_strings = tja11xx_get_strings, 823 .get_stats = tja11xx_get_stats, 824 }, { 825 PHY_ID_MATCH_MODEL(PHY_ID_TJA1101), 826 .name = "NXP TJA1101", 827 .features = PHY_BASIC_T1_FEATURES, 828 .probe = tja11xx_probe, 829 .soft_reset = tja11xx_soft_reset, 830 .config_aneg = tja11xx_config_aneg, 831 .config_init = tja11xx_config_init, 832 .read_status = tja11xx_read_status, 833 .get_sqi = tja11xx_get_sqi, 834 .get_sqi_max = tja11xx_get_sqi_max, 835 .suspend = genphy_suspend, 836 .resume = genphy_resume, 837 .set_loopback = genphy_loopback, 838 /* Statistics */ 839 .get_sset_count = tja11xx_get_sset_count, 840 .get_strings = tja11xx_get_strings, 841 .get_stats = tja11xx_get_stats, 842 }, { 843 .name = "NXP TJA1102 Port 0", 844 .features = PHY_BASIC_T1_FEATURES, 845 .flags = PHY_POLL_CABLE_TEST, 846 .probe = tja1102_p0_probe, 847 .soft_reset = tja11xx_soft_reset, 848 .config_aneg = tja11xx_config_aneg, 849 .config_init = tja11xx_config_init, 850 .read_status = tja11xx_read_status, 851 .get_sqi = tja11xx_get_sqi, 852 .get_sqi_max = tja11xx_get_sqi_max, 853 .match_phy_device = tja1102_p0_match_phy_device, 854 .suspend = genphy_suspend, 855 .resume = genphy_resume, 856 .set_loopback = genphy_loopback, 857 /* Statistics */ 858 .get_sset_count = tja11xx_get_sset_count, 859 .get_strings = tja11xx_get_strings, 860 .get_stats = tja11xx_get_stats, 861 .config_intr = tja11xx_config_intr, 862 .handle_interrupt = tja11xx_handle_interrupt, 863 .cable_test_start = tja11xx_cable_test_start, 864 .cable_test_get_status = tja11xx_cable_test_get_status, 865 }, { 866 .name = "NXP TJA1102 Port 1", 867 .features = PHY_BASIC_T1_FEATURES, 868 .flags = PHY_POLL_CABLE_TEST, 869 /* currently no probe for Port 1 is need */ 870 .soft_reset = tja11xx_soft_reset, 871 .config_aneg = tja11xx_config_aneg, 872 .config_init = tja11xx_config_init, 873 .read_status = tja11xx_read_status, 874 .get_sqi = tja11xx_get_sqi, 875 .get_sqi_max = tja11xx_get_sqi_max, 876 .match_phy_device = tja1102_p1_match_phy_device, 877 .suspend = genphy_suspend, 878 .resume = genphy_resume, 879 .set_loopback = genphy_loopback, 880 /* Statistics */ 881 .get_sset_count = tja11xx_get_sset_count, 882 .get_strings = tja11xx_get_strings, 883 .get_stats = tja11xx_get_stats, 884 .config_intr = tja11xx_config_intr, 885 .handle_interrupt = tja11xx_handle_interrupt, 886 .cable_test_start = tja11xx_cable_test_start, 887 .cable_test_get_status = tja11xx_cable_test_get_status, 888 } 889 }; 890 891 module_phy_driver(tja11xx_driver); 892 893 static struct mdio_device_id __maybe_unused tja11xx_tbl[] = { 894 { PHY_ID_MATCH_MODEL(PHY_ID_TJA1100) }, 895 { PHY_ID_MATCH_MODEL(PHY_ID_TJA1101) }, 896 { PHY_ID_MATCH_MODEL(PHY_ID_TJA1102) }, 897 { } 898 }; 899 900 MODULE_DEVICE_TABLE(mdio, tja11xx_tbl); 901 902 MODULE_AUTHOR("Marek Vasut <marex@denx.de>"); 903 MODULE_DESCRIPTION("NXP TJA11xx BoardR-Reach PHY driver"); 904 MODULE_LICENSE("GPL"); 905