1 /* 2 * drivers/net/phy/national.c 3 * 4 * Driver for National Semiconductor PHYs 5 * 6 * Author: Stuart Menefy <stuart.menefy@st.com> 7 * Maintainer: Giuseppe Cavallaro <peppe.cavallaro@st.com> 8 * 9 * Copyright (c) 2008 STMicroelectronics Limited 10 * 11 * This program is free software; you can redistribute it and/or modify it 12 * under the terms of the GNU General Public License as published by the 13 * Free Software Foundation; either version 2 of the License, or (at your 14 * option) any later version. 15 * 16 */ 17 18 #include <linux/kernel.h> 19 #include <linux/module.h> 20 #include <linux/mii.h> 21 #include <linux/ethtool.h> 22 #include <linux/phy.h> 23 #include <linux/netdevice.h> 24 25 /* DP83865 phy identifier values */ 26 #define DP83865_PHY_ID 0x20005c7a 27 28 #define DP83865_INT_MASK_REG 0x15 29 #define DP83865_INT_MASK_STATUS 0x14 30 31 #define DP83865_INT_REMOTE_FAULT 0x0008 32 #define DP83865_INT_ANE_COMPLETED 0x0010 33 #define DP83865_INT_LINK_CHANGE 0xe000 34 #define DP83865_INT_MASK_DEFAULT (DP83865_INT_REMOTE_FAULT | \ 35 DP83865_INT_ANE_COMPLETED | \ 36 DP83865_INT_LINK_CHANGE) 37 38 /* Advanced proprietary configuration */ 39 #define NS_EXP_MEM_CTL 0x16 40 #define NS_EXP_MEM_DATA 0x1d 41 #define NS_EXP_MEM_ADD 0x1e 42 43 #define LED_CTRL_REG 0x13 44 #define AN_FALLBACK_AN 0x0001 45 #define AN_FALLBACK_CRC 0x0002 46 #define AN_FALLBACK_IE 0x0004 47 #define ALL_FALLBACK_ON (AN_FALLBACK_AN | AN_FALLBACK_CRC | AN_FALLBACK_IE) 48 49 enum hdx_loopback { 50 hdx_loopback_on = 0, 51 hdx_loopback_off = 1, 52 }; 53 54 static u8 ns_exp_read(struct phy_device *phydev, u16 reg) 55 { 56 phy_write(phydev, NS_EXP_MEM_ADD, reg); 57 return phy_read(phydev, NS_EXP_MEM_DATA); 58 } 59 60 static void ns_exp_write(struct phy_device *phydev, u16 reg, u8 data) 61 { 62 phy_write(phydev, NS_EXP_MEM_ADD, reg); 63 phy_write(phydev, NS_EXP_MEM_DATA, data); 64 } 65 66 static int ns_config_intr(struct phy_device *phydev) 67 { 68 int err; 69 70 if (phydev->interrupts == PHY_INTERRUPT_ENABLED) 71 err = phy_write(phydev, DP83865_INT_MASK_REG, 72 DP83865_INT_MASK_DEFAULT); 73 else 74 err = phy_write(phydev, DP83865_INT_MASK_REG, 0); 75 76 return err; 77 } 78 79 static int ns_ack_interrupt(struct phy_device *phydev) 80 { 81 int ret = phy_read(phydev, DP83865_INT_MASK_STATUS); 82 if (ret < 0) 83 return ret; 84 85 return 0; 86 } 87 88 static void ns_giga_speed_fallback(struct phy_device *phydev, int mode) 89 { 90 int bmcr = phy_read(phydev, MII_BMCR); 91 92 phy_write(phydev, MII_BMCR, (bmcr | BMCR_PDOWN)); 93 94 /* Enable 8 bit expended memory read/write (no auto increment) */ 95 phy_write(phydev, NS_EXP_MEM_CTL, 0); 96 phy_write(phydev, NS_EXP_MEM_ADD, 0x1C0); 97 phy_write(phydev, NS_EXP_MEM_DATA, 0x0008); 98 phy_write(phydev, MII_BMCR, (bmcr & ~BMCR_PDOWN)); 99 phy_write(phydev, LED_CTRL_REG, mode); 100 return; 101 } 102 103 static void ns_10_base_t_hdx_loopack(struct phy_device *phydev, int disable) 104 { 105 if (disable) 106 ns_exp_write(phydev, 0x1c0, ns_exp_read(phydev, 0x1c0) | 1); 107 else 108 ns_exp_write(phydev, 0x1c0, 109 ns_exp_read(phydev, 0x1c0) & 0xfffe); 110 111 printk(KERN_DEBUG "DP83865 PHY: 10BASE-T HDX loopback %s\n", 112 (ns_exp_read(phydev, 0x1c0) & 0x0001) ? "off" : "on"); 113 114 return; 115 } 116 117 static int ns_config_init(struct phy_device *phydev) 118 { 119 ns_giga_speed_fallback(phydev, ALL_FALLBACK_ON); 120 /* In the latest MAC or switches design, the 10 Mbps loopback 121 is desired to be turned off. */ 122 ns_10_base_t_hdx_loopack(phydev, hdx_loopback_off); 123 return ns_ack_interrupt(phydev); 124 } 125 126 static struct phy_driver dp83865_driver = { 127 .phy_id = DP83865_PHY_ID, 128 .phy_id_mask = 0xfffffff0, 129 .name = "NatSemi DP83865", 130 .features = PHY_GBIT_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause, 131 .flags = PHY_HAS_INTERRUPT, 132 .config_init = ns_config_init, 133 .config_aneg = genphy_config_aneg, 134 .read_status = genphy_read_status, 135 .ack_interrupt = ns_ack_interrupt, 136 .config_intr = ns_config_intr, 137 .driver = {.owner = THIS_MODULE,} 138 }; 139 140 static int __init ns_init(void) 141 { 142 return phy_driver_register(&dp83865_driver); 143 } 144 145 static void __exit ns_exit(void) 146 { 147 phy_driver_unregister(&dp83865_driver); 148 } 149 150 MODULE_DESCRIPTION("NatSemi PHY driver"); 151 MODULE_AUTHOR("Stuart Menefy"); 152 MODULE_LICENSE("GPL"); 153 154 module_init(ns_init); 155 module_exit(ns_exit); 156