1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * Motorcomm 8511/8521/8531/8531S PHY driver.
4 *
5 * Author: Peter Geis <pgwipeout@gmail.com>
6 * Author: Frank <Frank.Sae@motor-comm.com>
7 */
8
9 #include <linux/etherdevice.h>
10 #include <linux/kernel.h>
11 #include <linux/module.h>
12 #include <linux/phy.h>
13 #include <linux/of.h>
14
15 #define PHY_ID_YT8511 0x0000010a
16 #define PHY_ID_YT8521 0x0000011a
17 #define PHY_ID_YT8531 0x4f51e91b
18 #define PHY_ID_YT8531S 0x4f51e91a
19
20 /* YT8521/YT8531S Register Overview
21 * UTP Register space | FIBER Register space
22 * ------------------------------------------------------------
23 * | UTP MII | FIBER MII |
24 * | UTP MMD | |
25 * | UTP Extended | FIBER Extended |
26 * ------------------------------------------------------------
27 * | Common Extended |
28 * ------------------------------------------------------------
29 */
30
31 /* 0x10 ~ 0x15 , 0x1E and 0x1F are common MII registers of yt phy */
32
33 /* Specific Function Control Register */
34 #define YTPHY_SPECIFIC_FUNCTION_CONTROL_REG 0x10
35
36 /* 2b00 Manual MDI configuration
37 * 2b01 Manual MDIX configuration
38 * 2b10 Reserved
39 * 2b11 Enable automatic crossover for all modes *default*
40 */
41 #define YTPHY_SFCR_MDI_CROSSOVER_MODE_MASK (BIT(6) | BIT(5))
42 #define YTPHY_SFCR_CROSSOVER_EN BIT(3)
43 #define YTPHY_SFCR_SQE_TEST_EN BIT(2)
44 #define YTPHY_SFCR_POLARITY_REVERSAL_EN BIT(1)
45 #define YTPHY_SFCR_JABBER_DIS BIT(0)
46
47 /* Specific Status Register */
48 #define YTPHY_SPECIFIC_STATUS_REG 0x11
49 #define YTPHY_SSR_SPEED_MODE_OFFSET 14
50
51 #define YTPHY_SSR_SPEED_MODE_MASK (BIT(15) | BIT(14))
52 #define YTPHY_SSR_SPEED_10M 0x0
53 #define YTPHY_SSR_SPEED_100M 0x1
54 #define YTPHY_SSR_SPEED_1000M 0x2
55 #define YTPHY_SSR_DUPLEX_OFFSET 13
56 #define YTPHY_SSR_DUPLEX BIT(13)
57 #define YTPHY_SSR_PAGE_RECEIVED BIT(12)
58 #define YTPHY_SSR_SPEED_DUPLEX_RESOLVED BIT(11)
59 #define YTPHY_SSR_LINK BIT(10)
60 #define YTPHY_SSR_MDIX_CROSSOVER BIT(6)
61 #define YTPHY_SSR_DOWNGRADE BIT(5)
62 #define YTPHY_SSR_TRANSMIT_PAUSE BIT(3)
63 #define YTPHY_SSR_RECEIVE_PAUSE BIT(2)
64 #define YTPHY_SSR_POLARITY BIT(1)
65 #define YTPHY_SSR_JABBER BIT(0)
66
67 /* Interrupt enable Register */
68 #define YTPHY_INTERRUPT_ENABLE_REG 0x12
69 #define YTPHY_IER_WOL BIT(6)
70
71 /* Interrupt Status Register */
72 #define YTPHY_INTERRUPT_STATUS_REG 0x13
73 #define YTPHY_ISR_AUTONEG_ERR BIT(15)
74 #define YTPHY_ISR_SPEED_CHANGED BIT(14)
75 #define YTPHY_ISR_DUPLEX_CHANGED BIT(13)
76 #define YTPHY_ISR_PAGE_RECEIVED BIT(12)
77 #define YTPHY_ISR_LINK_FAILED BIT(11)
78 #define YTPHY_ISR_LINK_SUCCESSED BIT(10)
79 #define YTPHY_ISR_WOL BIT(6)
80 #define YTPHY_ISR_WIRESPEED_DOWNGRADE BIT(5)
81 #define YTPHY_ISR_SERDES_LINK_FAILED BIT(3)
82 #define YTPHY_ISR_SERDES_LINK_SUCCESSED BIT(2)
83 #define YTPHY_ISR_POLARITY_CHANGED BIT(1)
84 #define YTPHY_ISR_JABBER_HAPPENED BIT(0)
85
86 /* Speed Auto Downgrade Control Register */
87 #define YTPHY_SPEED_AUTO_DOWNGRADE_CONTROL_REG 0x14
88 #define YTPHY_SADCR_SPEED_DOWNGRADE_EN BIT(5)
89
90 /* If these bits are set to 3, the PHY attempts five times ( 3(set value) +
91 * additional 2) before downgrading, default 0x3
92 */
93 #define YTPHY_SADCR_SPEED_RETRY_LIMIT (0x3 << 2)
94
95 /* Rx Error Counter Register */
96 #define YTPHY_RX_ERROR_COUNTER_REG 0x15
97
98 /* Extended Register's Address Offset Register */
99 #define YTPHY_PAGE_SELECT 0x1E
100
101 /* Extended Register's Data Register */
102 #define YTPHY_PAGE_DATA 0x1F
103
104 /* FIBER Auto-Negotiation link partner ability */
105 #define YTPHY_FLPA_PAUSE (0x3 << 7)
106 #define YTPHY_FLPA_ASYM_PAUSE (0x2 << 7)
107
108 #define YT8511_PAGE_SELECT 0x1e
109 #define YT8511_PAGE 0x1f
110 #define YT8511_EXT_CLK_GATE 0x0c
111 #define YT8511_EXT_DELAY_DRIVE 0x0d
112 #define YT8511_EXT_SLEEP_CTRL 0x27
113
114 /* 2b00 25m from pll
115 * 2b01 25m from xtl *default*
116 * 2b10 62.m from pll
117 * 2b11 125m from pll
118 */
119 #define YT8511_CLK_125M (BIT(2) | BIT(1))
120 #define YT8511_PLLON_SLP BIT(14)
121
122 /* RX Delay enabled = 1.8ns 1000T, 8ns 10/100T */
123 #define YT8511_DELAY_RX BIT(0)
124
125 /* TX Gig-E Delay is bits 7:4, default 0x5
126 * TX Fast-E Delay is bits 15:12, default 0xf
127 * Delay = 150ps * N - 250ps
128 * On = 2000ps, off = 50ps
129 */
130 #define YT8511_DELAY_GE_TX_EN (0xf << 4)
131 #define YT8511_DELAY_GE_TX_DIS (0x2 << 4)
132 #define YT8511_DELAY_FE_TX_EN (0xf << 12)
133 #define YT8511_DELAY_FE_TX_DIS (0x2 << 12)
134
135 /* Extended register is different from MMD Register and MII Register.
136 * We can use ytphy_read_ext/ytphy_write_ext/ytphy_modify_ext function to
137 * operate extended register.
138 * Extended Register start
139 */
140
141 /* Phy gmii clock gating Register */
142 #define YT8521_CLOCK_GATING_REG 0xC
143 #define YT8521_CGR_RX_CLK_EN BIT(12)
144
145 #define YT8521_EXTREG_SLEEP_CONTROL1_REG 0x27
146 #define YT8521_ESC1R_SLEEP_SW BIT(15)
147 #define YT8521_ESC1R_PLLON_SLP BIT(14)
148
149 /* Phy fiber Link timer cfg2 Register */
150 #define YT8521_LINK_TIMER_CFG2_REG 0xA5
151 #define YT8521_LTCR_EN_AUTOSEN BIT(15)
152
153 /* 0xA000, 0xA001, 0xA003, 0xA006 ~ 0xA00A and 0xA012 are common ext registers
154 * of yt8521 phy. There is no need to switch reg space when operating these
155 * registers.
156 */
157
158 #define YT8521_REG_SPACE_SELECT_REG 0xA000
159 #define YT8521_RSSR_SPACE_MASK BIT(1)
160 #define YT8521_RSSR_FIBER_SPACE (0x1 << 1)
161 #define YT8521_RSSR_UTP_SPACE (0x0 << 1)
162 #define YT8521_RSSR_TO_BE_ARBITRATED (0xFF)
163
164 #define YT8521_CHIP_CONFIG_REG 0xA001
165 #define YT8521_CCR_SW_RST BIT(15)
166 #define YT8531_RGMII_LDO_VOL_MASK GENMASK(5, 4)
167 #define YT8531_LDO_VOL_3V3 0x0
168 #define YT8531_LDO_VOL_1V8 0x2
169
170 /* 1b0 disable 1.9ns rxc clock delay *default*
171 * 1b1 enable 1.9ns rxc clock delay
172 */
173 #define YT8521_CCR_RXC_DLY_EN BIT(8)
174 #define YT8521_CCR_RXC_DLY_1_900_NS 1900
175
176 #define YT8521_CCR_MODE_SEL_MASK (BIT(2) | BIT(1) | BIT(0))
177 #define YT8521_CCR_MODE_UTP_TO_RGMII 0
178 #define YT8521_CCR_MODE_FIBER_TO_RGMII 1
179 #define YT8521_CCR_MODE_UTP_FIBER_TO_RGMII 2
180 #define YT8521_CCR_MODE_UTP_TO_SGMII 3
181 #define YT8521_CCR_MODE_SGPHY_TO_RGMAC 4
182 #define YT8521_CCR_MODE_SGMAC_TO_RGPHY 5
183 #define YT8521_CCR_MODE_UTP_TO_FIBER_AUTO 6
184 #define YT8521_CCR_MODE_UTP_TO_FIBER_FORCE 7
185
186 /* 3 phy polling modes,poll mode combines utp and fiber mode*/
187 #define YT8521_MODE_FIBER 0x1
188 #define YT8521_MODE_UTP 0x2
189 #define YT8521_MODE_POLL 0x3
190
191 #define YT8521_RGMII_CONFIG1_REG 0xA003
192 /* 1b0 use original tx_clk_rgmii *default*
193 * 1b1 use inverted tx_clk_rgmii.
194 */
195 #define YT8521_RC1R_TX_CLK_SEL_INVERTED BIT(14)
196 #define YT8521_RC1R_RX_DELAY_MASK GENMASK(13, 10)
197 #define YT8521_RC1R_FE_TX_DELAY_MASK GENMASK(7, 4)
198 #define YT8521_RC1R_GE_TX_DELAY_MASK GENMASK(3, 0)
199 #define YT8521_RC1R_RGMII_0_000_NS 0
200 #define YT8521_RC1R_RGMII_0_150_NS 1
201 #define YT8521_RC1R_RGMII_0_300_NS 2
202 #define YT8521_RC1R_RGMII_0_450_NS 3
203 #define YT8521_RC1R_RGMII_0_600_NS 4
204 #define YT8521_RC1R_RGMII_0_750_NS 5
205 #define YT8521_RC1R_RGMII_0_900_NS 6
206 #define YT8521_RC1R_RGMII_1_050_NS 7
207 #define YT8521_RC1R_RGMII_1_200_NS 8
208 #define YT8521_RC1R_RGMII_1_350_NS 9
209 #define YT8521_RC1R_RGMII_1_500_NS 10
210 #define YT8521_RC1R_RGMII_1_650_NS 11
211 #define YT8521_RC1R_RGMII_1_800_NS 12
212 #define YT8521_RC1R_RGMII_1_950_NS 13
213 #define YT8521_RC1R_RGMII_2_100_NS 14
214 #define YT8521_RC1R_RGMII_2_250_NS 15
215
216 #define YTPHY_MISC_CONFIG_REG 0xA006
217 #define YTPHY_MCR_FIBER_SPEED_MASK BIT(0)
218 #define YTPHY_MCR_FIBER_1000BX (0x1 << 0)
219 #define YTPHY_MCR_FIBER_100FX (0x0 << 0)
220
221 /* WOL MAC ADDR: MACADDR2(highest), MACADDR1(middle), MACADDR0(lowest) */
222 #define YTPHY_WOL_MACADDR2_REG 0xA007
223 #define YTPHY_WOL_MACADDR1_REG 0xA008
224 #define YTPHY_WOL_MACADDR0_REG 0xA009
225
226 #define YTPHY_WOL_CONFIG_REG 0xA00A
227 #define YTPHY_WCR_INTR_SEL BIT(6)
228 #define YTPHY_WCR_ENABLE BIT(3)
229
230 /* 2b00 84ms
231 * 2b01 168ms *default*
232 * 2b10 336ms
233 * 2b11 672ms
234 */
235 #define YTPHY_WCR_PULSE_WIDTH_MASK (BIT(2) | BIT(1))
236 #define YTPHY_WCR_PULSE_WIDTH_672MS (BIT(2) | BIT(1))
237
238 /* 1b0 Interrupt and WOL events is level triggered and active LOW *default*
239 * 1b1 Interrupt and WOL events is pulse triggered and active LOW
240 */
241 #define YTPHY_WCR_TYPE_PULSE BIT(0)
242
243 #define YTPHY_PAD_DRIVE_STRENGTH_REG 0xA010
244 #define YT8531_RGMII_RXC_DS_MASK GENMASK(15, 13)
245 #define YT8531_RGMII_RXD_DS_HI_MASK BIT(12) /* Bit 2 of rxd_ds */
246 #define YT8531_RGMII_RXD_DS_LOW_MASK GENMASK(5, 4) /* Bit 1/0 of rxd_ds */
247 #define YT8531_RGMII_RX_DS_DEFAULT 0x3
248
249 #define YTPHY_SYNCE_CFG_REG 0xA012
250 #define YT8521_SCR_SYNCE_ENABLE BIT(5)
251 /* 1b0 output 25m clock
252 * 1b1 output 125m clock *default*
253 */
254 #define YT8521_SCR_CLK_FRE_SEL_125M BIT(3)
255 #define YT8521_SCR_CLK_SRC_MASK GENMASK(2, 1)
256 #define YT8521_SCR_CLK_SRC_PLL_125M 0
257 #define YT8521_SCR_CLK_SRC_UTP_RX 1
258 #define YT8521_SCR_CLK_SRC_SDS_RX 2
259 #define YT8521_SCR_CLK_SRC_REF_25M 3
260 #define YT8531_SCR_SYNCE_ENABLE BIT(6)
261 /* 1b0 output 25m clock *default*
262 * 1b1 output 125m clock
263 */
264 #define YT8531_SCR_CLK_FRE_SEL_125M BIT(4)
265 #define YT8531_SCR_CLK_SRC_MASK GENMASK(3, 1)
266 #define YT8531_SCR_CLK_SRC_PLL_125M 0
267 #define YT8531_SCR_CLK_SRC_UTP_RX 1
268 #define YT8531_SCR_CLK_SRC_SDS_RX 2
269 #define YT8531_SCR_CLK_SRC_CLOCK_FROM_DIGITAL 3
270 #define YT8531_SCR_CLK_SRC_REF_25M 4
271 #define YT8531_SCR_CLK_SRC_SSC_25M 5
272
273 /* Extended Register end */
274
275 #define YTPHY_DTS_OUTPUT_CLK_DIS 0
276 #define YTPHY_DTS_OUTPUT_CLK_25M 25000000
277 #define YTPHY_DTS_OUTPUT_CLK_125M 125000000
278
279 struct yt8521_priv {
280 /* combo_advertising is used for case of YT8521 in combo mode,
281 * this means that yt8521 may work in utp or fiber mode which depends
282 * on which media is connected (YT8521_RSSR_TO_BE_ARBITRATED).
283 */
284 __ETHTOOL_DECLARE_LINK_MODE_MASK(combo_advertising);
285
286 /* YT8521_MODE_FIBER / YT8521_MODE_UTP / YT8521_MODE_POLL*/
287 u8 polling_mode;
288 u8 strap_mode; /* 8 working modes */
289 /* current reg page of yt8521 phy:
290 * YT8521_RSSR_UTP_SPACE
291 * YT8521_RSSR_FIBER_SPACE
292 * YT8521_RSSR_TO_BE_ARBITRATED
293 */
294 u8 reg_page;
295 };
296
297 /**
298 * ytphy_read_ext() - read a PHY's extended register
299 * @phydev: a pointer to a &struct phy_device
300 * @regnum: register number to read
301 *
302 * NOTE:The caller must have taken the MDIO bus lock.
303 *
304 * returns the value of regnum reg or negative error code
305 */
ytphy_read_ext(struct phy_device * phydev,u16 regnum)306 static int ytphy_read_ext(struct phy_device *phydev, u16 regnum)
307 {
308 int ret;
309
310 ret = __phy_write(phydev, YTPHY_PAGE_SELECT, regnum);
311 if (ret < 0)
312 return ret;
313
314 return __phy_read(phydev, YTPHY_PAGE_DATA);
315 }
316
317 /**
318 * ytphy_read_ext_with_lock() - read a PHY's extended register
319 * @phydev: a pointer to a &struct phy_device
320 * @regnum: register number to read
321 *
322 * returns the value of regnum reg or negative error code
323 */
ytphy_read_ext_with_lock(struct phy_device * phydev,u16 regnum)324 static int ytphy_read_ext_with_lock(struct phy_device *phydev, u16 regnum)
325 {
326 int ret;
327
328 phy_lock_mdio_bus(phydev);
329 ret = ytphy_read_ext(phydev, regnum);
330 phy_unlock_mdio_bus(phydev);
331
332 return ret;
333 }
334
335 /**
336 * ytphy_write_ext() - write a PHY's extended register
337 * @phydev: a pointer to a &struct phy_device
338 * @regnum: register number to write
339 * @val: value to write to @regnum
340 *
341 * NOTE:The caller must have taken the MDIO bus lock.
342 *
343 * returns 0 or negative error code
344 */
ytphy_write_ext(struct phy_device * phydev,u16 regnum,u16 val)345 static int ytphy_write_ext(struct phy_device *phydev, u16 regnum, u16 val)
346 {
347 int ret;
348
349 ret = __phy_write(phydev, YTPHY_PAGE_SELECT, regnum);
350 if (ret < 0)
351 return ret;
352
353 return __phy_write(phydev, YTPHY_PAGE_DATA, val);
354 }
355
356 /**
357 * ytphy_write_ext_with_lock() - write a PHY's extended register
358 * @phydev: a pointer to a &struct phy_device
359 * @regnum: register number to write
360 * @val: value to write to @regnum
361 *
362 * returns 0 or negative error code
363 */
ytphy_write_ext_with_lock(struct phy_device * phydev,u16 regnum,u16 val)364 static int ytphy_write_ext_with_lock(struct phy_device *phydev, u16 regnum,
365 u16 val)
366 {
367 int ret;
368
369 phy_lock_mdio_bus(phydev);
370 ret = ytphy_write_ext(phydev, regnum, val);
371 phy_unlock_mdio_bus(phydev);
372
373 return ret;
374 }
375
376 /**
377 * ytphy_modify_ext() - bits modify a PHY's extended register
378 * @phydev: a pointer to a &struct phy_device
379 * @regnum: register number to write
380 * @mask: bit mask of bits to clear
381 * @set: bit mask of bits to set
382 *
383 * NOTE: Convenience function which allows a PHY's extended register to be
384 * modified as new register value = (old register value & ~mask) | set.
385 * The caller must have taken the MDIO bus lock.
386 *
387 * returns 0 or negative error code
388 */
ytphy_modify_ext(struct phy_device * phydev,u16 regnum,u16 mask,u16 set)389 static int ytphy_modify_ext(struct phy_device *phydev, u16 regnum, u16 mask,
390 u16 set)
391 {
392 int ret;
393
394 ret = __phy_write(phydev, YTPHY_PAGE_SELECT, regnum);
395 if (ret < 0)
396 return ret;
397
398 return __phy_modify(phydev, YTPHY_PAGE_DATA, mask, set);
399 }
400
401 /**
402 * ytphy_modify_ext_with_lock() - bits modify a PHY's extended register
403 * @phydev: a pointer to a &struct phy_device
404 * @regnum: register number to write
405 * @mask: bit mask of bits to clear
406 * @set: bit mask of bits to set
407 *
408 * NOTE: Convenience function which allows a PHY's extended register to be
409 * modified as new register value = (old register value & ~mask) | set.
410 *
411 * returns 0 or negative error code
412 */
ytphy_modify_ext_with_lock(struct phy_device * phydev,u16 regnum,u16 mask,u16 set)413 static int ytphy_modify_ext_with_lock(struct phy_device *phydev, u16 regnum,
414 u16 mask, u16 set)
415 {
416 int ret;
417
418 phy_lock_mdio_bus(phydev);
419 ret = ytphy_modify_ext(phydev, regnum, mask, set);
420 phy_unlock_mdio_bus(phydev);
421
422 return ret;
423 }
424
425 /**
426 * ytphy_get_wol() - report whether wake-on-lan is enabled
427 * @phydev: a pointer to a &struct phy_device
428 * @wol: a pointer to a &struct ethtool_wolinfo
429 *
430 * NOTE: YTPHY_WOL_CONFIG_REG is common ext reg.
431 */
ytphy_get_wol(struct phy_device * phydev,struct ethtool_wolinfo * wol)432 static void ytphy_get_wol(struct phy_device *phydev,
433 struct ethtool_wolinfo *wol)
434 {
435 int wol_config;
436
437 wol->supported = WAKE_MAGIC;
438 wol->wolopts = 0;
439
440 wol_config = ytphy_read_ext_with_lock(phydev, YTPHY_WOL_CONFIG_REG);
441 if (wol_config < 0)
442 return;
443
444 if (wol_config & YTPHY_WCR_ENABLE)
445 wol->wolopts |= WAKE_MAGIC;
446 }
447
448 /**
449 * ytphy_set_wol() - turn wake-on-lan on or off
450 * @phydev: a pointer to a &struct phy_device
451 * @wol: a pointer to a &struct ethtool_wolinfo
452 *
453 * NOTE: YTPHY_WOL_CONFIG_REG, YTPHY_WOL_MACADDR2_REG, YTPHY_WOL_MACADDR1_REG
454 * and YTPHY_WOL_MACADDR0_REG are common ext reg. The
455 * YTPHY_INTERRUPT_ENABLE_REG of UTP is special, fiber also use this register.
456 *
457 * returns 0 or negative errno code
458 */
ytphy_set_wol(struct phy_device * phydev,struct ethtool_wolinfo * wol)459 static int ytphy_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
460 {
461 struct net_device *p_attached_dev;
462 const u16 mac_addr_reg[] = {
463 YTPHY_WOL_MACADDR2_REG,
464 YTPHY_WOL_MACADDR1_REG,
465 YTPHY_WOL_MACADDR0_REG,
466 };
467 const u8 *mac_addr;
468 int old_page;
469 int ret = 0;
470 u16 mask;
471 u16 val;
472 u8 i;
473
474 if (wol->wolopts & WAKE_MAGIC) {
475 p_attached_dev = phydev->attached_dev;
476 if (!p_attached_dev)
477 return -ENODEV;
478
479 mac_addr = (const u8 *)p_attached_dev->dev_addr;
480 if (!is_valid_ether_addr(mac_addr))
481 return -EINVAL;
482
483 /* lock mdio bus then switch to utp reg space */
484 old_page = phy_select_page(phydev, YT8521_RSSR_UTP_SPACE);
485 if (old_page < 0)
486 goto err_restore_page;
487
488 /* Store the device address for the magic packet */
489 for (i = 0; i < 3; i++) {
490 ret = ytphy_write_ext(phydev, mac_addr_reg[i],
491 ((mac_addr[i * 2] << 8)) |
492 (mac_addr[i * 2 + 1]));
493 if (ret < 0)
494 goto err_restore_page;
495 }
496
497 /* Enable WOL feature */
498 mask = YTPHY_WCR_PULSE_WIDTH_MASK | YTPHY_WCR_INTR_SEL;
499 val = YTPHY_WCR_ENABLE | YTPHY_WCR_INTR_SEL;
500 val |= YTPHY_WCR_TYPE_PULSE | YTPHY_WCR_PULSE_WIDTH_672MS;
501 ret = ytphy_modify_ext(phydev, YTPHY_WOL_CONFIG_REG, mask, val);
502 if (ret < 0)
503 goto err_restore_page;
504
505 /* Enable WOL interrupt */
506 ret = __phy_modify(phydev, YTPHY_INTERRUPT_ENABLE_REG, 0,
507 YTPHY_IER_WOL);
508 if (ret < 0)
509 goto err_restore_page;
510
511 } else {
512 old_page = phy_select_page(phydev, YT8521_RSSR_UTP_SPACE);
513 if (old_page < 0)
514 goto err_restore_page;
515
516 /* Disable WOL feature */
517 mask = YTPHY_WCR_ENABLE | YTPHY_WCR_INTR_SEL;
518 ret = ytphy_modify_ext(phydev, YTPHY_WOL_CONFIG_REG, mask, 0);
519
520 /* Disable WOL interrupt */
521 ret = __phy_modify(phydev, YTPHY_INTERRUPT_ENABLE_REG,
522 YTPHY_IER_WOL, 0);
523 if (ret < 0)
524 goto err_restore_page;
525 }
526
527 err_restore_page:
528 return phy_restore_page(phydev, old_page, ret);
529 }
530
yt8531_set_wol(struct phy_device * phydev,struct ethtool_wolinfo * wol)531 static int yt8531_set_wol(struct phy_device *phydev,
532 struct ethtool_wolinfo *wol)
533 {
534 const u16 mac_addr_reg[] = {
535 YTPHY_WOL_MACADDR2_REG,
536 YTPHY_WOL_MACADDR1_REG,
537 YTPHY_WOL_MACADDR0_REG,
538 };
539 const u8 *mac_addr;
540 u16 mask, val;
541 int ret;
542 u8 i;
543
544 if (wol->wolopts & WAKE_MAGIC) {
545 mac_addr = phydev->attached_dev->dev_addr;
546
547 /* Store the device address for the magic packet */
548 for (i = 0; i < 3; i++) {
549 ret = ytphy_write_ext_with_lock(phydev, mac_addr_reg[i],
550 ((mac_addr[i * 2] << 8)) |
551 (mac_addr[i * 2 + 1]));
552 if (ret < 0)
553 return ret;
554 }
555
556 /* Enable WOL feature */
557 mask = YTPHY_WCR_PULSE_WIDTH_MASK | YTPHY_WCR_INTR_SEL;
558 val = YTPHY_WCR_ENABLE | YTPHY_WCR_INTR_SEL;
559 val |= YTPHY_WCR_TYPE_PULSE | YTPHY_WCR_PULSE_WIDTH_672MS;
560 ret = ytphy_modify_ext_with_lock(phydev, YTPHY_WOL_CONFIG_REG,
561 mask, val);
562 if (ret < 0)
563 return ret;
564
565 /* Enable WOL interrupt */
566 ret = phy_modify(phydev, YTPHY_INTERRUPT_ENABLE_REG, 0,
567 YTPHY_IER_WOL);
568 if (ret < 0)
569 return ret;
570 } else {
571 /* Disable WOL feature */
572 mask = YTPHY_WCR_ENABLE | YTPHY_WCR_INTR_SEL;
573 ret = ytphy_modify_ext_with_lock(phydev, YTPHY_WOL_CONFIG_REG,
574 mask, 0);
575
576 /* Disable WOL interrupt */
577 ret = phy_modify(phydev, YTPHY_INTERRUPT_ENABLE_REG,
578 YTPHY_IER_WOL, 0);
579 if (ret < 0)
580 return ret;
581 }
582
583 return 0;
584 }
585
yt8511_read_page(struct phy_device * phydev)586 static int yt8511_read_page(struct phy_device *phydev)
587 {
588 return __phy_read(phydev, YT8511_PAGE_SELECT);
589 };
590
yt8511_write_page(struct phy_device * phydev,int page)591 static int yt8511_write_page(struct phy_device *phydev, int page)
592 {
593 return __phy_write(phydev, YT8511_PAGE_SELECT, page);
594 };
595
yt8511_config_init(struct phy_device * phydev)596 static int yt8511_config_init(struct phy_device *phydev)
597 {
598 int oldpage, ret = 0;
599 unsigned int ge, fe;
600
601 oldpage = phy_select_page(phydev, YT8511_EXT_CLK_GATE);
602 if (oldpage < 0)
603 goto err_restore_page;
604
605 /* set rgmii delay mode */
606 switch (phydev->interface) {
607 case PHY_INTERFACE_MODE_RGMII:
608 ge = YT8511_DELAY_GE_TX_DIS;
609 fe = YT8511_DELAY_FE_TX_DIS;
610 break;
611 case PHY_INTERFACE_MODE_RGMII_RXID:
612 ge = YT8511_DELAY_RX | YT8511_DELAY_GE_TX_DIS;
613 fe = YT8511_DELAY_FE_TX_DIS;
614 break;
615 case PHY_INTERFACE_MODE_RGMII_TXID:
616 ge = YT8511_DELAY_GE_TX_EN;
617 fe = YT8511_DELAY_FE_TX_EN;
618 break;
619 case PHY_INTERFACE_MODE_RGMII_ID:
620 ge = YT8511_DELAY_RX | YT8511_DELAY_GE_TX_EN;
621 fe = YT8511_DELAY_FE_TX_EN;
622 break;
623 default: /* do not support other modes */
624 ret = -EOPNOTSUPP;
625 goto err_restore_page;
626 }
627
628 ret = __phy_modify(phydev, YT8511_PAGE, (YT8511_DELAY_RX | YT8511_DELAY_GE_TX_EN), ge);
629 if (ret < 0)
630 goto err_restore_page;
631
632 /* set clock mode to 125mhz */
633 ret = __phy_modify(phydev, YT8511_PAGE, 0, YT8511_CLK_125M);
634 if (ret < 0)
635 goto err_restore_page;
636
637 /* fast ethernet delay is in a separate page */
638 ret = __phy_write(phydev, YT8511_PAGE_SELECT, YT8511_EXT_DELAY_DRIVE);
639 if (ret < 0)
640 goto err_restore_page;
641
642 ret = __phy_modify(phydev, YT8511_PAGE, YT8511_DELAY_FE_TX_EN, fe);
643 if (ret < 0)
644 goto err_restore_page;
645
646 /* leave pll enabled in sleep */
647 ret = __phy_write(phydev, YT8511_PAGE_SELECT, YT8511_EXT_SLEEP_CTRL);
648 if (ret < 0)
649 goto err_restore_page;
650
651 ret = __phy_modify(phydev, YT8511_PAGE, 0, YT8511_PLLON_SLP);
652 if (ret < 0)
653 goto err_restore_page;
654
655 err_restore_page:
656 return phy_restore_page(phydev, oldpage, ret);
657 }
658
659 /**
660 * yt8521_read_page() - read reg page
661 * @phydev: a pointer to a &struct phy_device
662 *
663 * returns current reg space of yt8521 (YT8521_RSSR_FIBER_SPACE/
664 * YT8521_RSSR_UTP_SPACE) or negative errno code
665 */
yt8521_read_page(struct phy_device * phydev)666 static int yt8521_read_page(struct phy_device *phydev)
667 {
668 int old_page;
669
670 old_page = ytphy_read_ext(phydev, YT8521_REG_SPACE_SELECT_REG);
671 if (old_page < 0)
672 return old_page;
673
674 if ((old_page & YT8521_RSSR_SPACE_MASK) == YT8521_RSSR_FIBER_SPACE)
675 return YT8521_RSSR_FIBER_SPACE;
676
677 return YT8521_RSSR_UTP_SPACE;
678 };
679
680 /**
681 * yt8521_write_page() - write reg page
682 * @phydev: a pointer to a &struct phy_device
683 * @page: The reg page(YT8521_RSSR_FIBER_SPACE/YT8521_RSSR_UTP_SPACE) to write.
684 *
685 * returns 0 or negative errno code
686 */
yt8521_write_page(struct phy_device * phydev,int page)687 static int yt8521_write_page(struct phy_device *phydev, int page)
688 {
689 int mask = YT8521_RSSR_SPACE_MASK;
690 int set;
691
692 if ((page & YT8521_RSSR_SPACE_MASK) == YT8521_RSSR_FIBER_SPACE)
693 set = YT8521_RSSR_FIBER_SPACE;
694 else
695 set = YT8521_RSSR_UTP_SPACE;
696
697 return ytphy_modify_ext(phydev, YT8521_REG_SPACE_SELECT_REG, mask, set);
698 };
699
700 /**
701 * struct ytphy_cfg_reg_map - map a config value to a register value
702 * @cfg: value in device configuration
703 * @reg: value in the register
704 */
705 struct ytphy_cfg_reg_map {
706 u32 cfg;
707 u32 reg;
708 };
709
710 static const struct ytphy_cfg_reg_map ytphy_rgmii_delays[] = {
711 /* for tx delay / rx delay with YT8521_CCR_RXC_DLY_EN is not set. */
712 { 0, YT8521_RC1R_RGMII_0_000_NS },
713 { 150, YT8521_RC1R_RGMII_0_150_NS },
714 { 300, YT8521_RC1R_RGMII_0_300_NS },
715 { 450, YT8521_RC1R_RGMII_0_450_NS },
716 { 600, YT8521_RC1R_RGMII_0_600_NS },
717 { 750, YT8521_RC1R_RGMII_0_750_NS },
718 { 900, YT8521_RC1R_RGMII_0_900_NS },
719 { 1050, YT8521_RC1R_RGMII_1_050_NS },
720 { 1200, YT8521_RC1R_RGMII_1_200_NS },
721 { 1350, YT8521_RC1R_RGMII_1_350_NS },
722 { 1500, YT8521_RC1R_RGMII_1_500_NS },
723 { 1650, YT8521_RC1R_RGMII_1_650_NS },
724 { 1800, YT8521_RC1R_RGMII_1_800_NS },
725 { 1950, YT8521_RC1R_RGMII_1_950_NS }, /* default tx/rx delay */
726 { 2100, YT8521_RC1R_RGMII_2_100_NS },
727 { 2250, YT8521_RC1R_RGMII_2_250_NS },
728
729 /* only for rx delay with YT8521_CCR_RXC_DLY_EN is set. */
730 { 0 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_0_000_NS },
731 { 150 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_0_150_NS },
732 { 300 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_0_300_NS },
733 { 450 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_0_450_NS },
734 { 600 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_0_600_NS },
735 { 750 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_0_750_NS },
736 { 900 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_0_900_NS },
737 { 1050 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_1_050_NS },
738 { 1200 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_1_200_NS },
739 { 1350 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_1_350_NS },
740 { 1500 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_1_500_NS },
741 { 1650 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_1_650_NS },
742 { 1800 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_1_800_NS },
743 { 1950 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_1_950_NS },
744 { 2100 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_2_100_NS },
745 { 2250 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_2_250_NS }
746 };
747
ytphy_get_delay_reg_value(struct phy_device * phydev,const char * prop_name,const struct ytphy_cfg_reg_map * tbl,int tb_size,u16 * rxc_dly_en,u32 dflt)748 static u32 ytphy_get_delay_reg_value(struct phy_device *phydev,
749 const char *prop_name,
750 const struct ytphy_cfg_reg_map *tbl,
751 int tb_size,
752 u16 *rxc_dly_en,
753 u32 dflt)
754 {
755 struct device_node *node = phydev->mdio.dev.of_node;
756 int tb_size_half = tb_size / 2;
757 u32 val;
758 int i;
759
760 if (of_property_read_u32(node, prop_name, &val))
761 goto err_dts_val;
762
763 /* when rxc_dly_en is NULL, it is get the delay for tx, only half of
764 * tb_size is valid.
765 */
766 if (!rxc_dly_en)
767 tb_size = tb_size_half;
768
769 for (i = 0; i < tb_size; i++) {
770 if (tbl[i].cfg == val) {
771 if (rxc_dly_en && i < tb_size_half)
772 *rxc_dly_en = 0;
773 return tbl[i].reg;
774 }
775 }
776
777 phydev_warn(phydev, "Unsupported value %d for %s using default (%u)\n",
778 val, prop_name, dflt);
779
780 err_dts_val:
781 /* when rxc_dly_en is not NULL, it is get the delay for rx.
782 * The rx default in dts and ytphy_rgmii_clk_delay_config is 1950 ps,
783 * so YT8521_CCR_RXC_DLY_EN should not be set.
784 */
785 if (rxc_dly_en)
786 *rxc_dly_en = 0;
787
788 return dflt;
789 }
790
ytphy_rgmii_clk_delay_config(struct phy_device * phydev)791 static int ytphy_rgmii_clk_delay_config(struct phy_device *phydev)
792 {
793 int tb_size = ARRAY_SIZE(ytphy_rgmii_delays);
794 u16 rxc_dly_en = YT8521_CCR_RXC_DLY_EN;
795 u32 rx_reg, tx_reg;
796 u16 mask, val = 0;
797 int ret;
798
799 rx_reg = ytphy_get_delay_reg_value(phydev, "rx-internal-delay-ps",
800 ytphy_rgmii_delays, tb_size,
801 &rxc_dly_en,
802 YT8521_RC1R_RGMII_1_950_NS);
803 tx_reg = ytphy_get_delay_reg_value(phydev, "tx-internal-delay-ps",
804 ytphy_rgmii_delays, tb_size, NULL,
805 YT8521_RC1R_RGMII_1_950_NS);
806
807 switch (phydev->interface) {
808 case PHY_INTERFACE_MODE_RGMII:
809 rxc_dly_en = 0;
810 break;
811 case PHY_INTERFACE_MODE_RGMII_RXID:
812 val |= FIELD_PREP(YT8521_RC1R_RX_DELAY_MASK, rx_reg);
813 break;
814 case PHY_INTERFACE_MODE_RGMII_TXID:
815 rxc_dly_en = 0;
816 val |= FIELD_PREP(YT8521_RC1R_GE_TX_DELAY_MASK, tx_reg);
817 break;
818 case PHY_INTERFACE_MODE_RGMII_ID:
819 val |= FIELD_PREP(YT8521_RC1R_RX_DELAY_MASK, rx_reg) |
820 FIELD_PREP(YT8521_RC1R_GE_TX_DELAY_MASK, tx_reg);
821 break;
822 default: /* do not support other modes */
823 return -EOPNOTSUPP;
824 }
825
826 ret = ytphy_modify_ext(phydev, YT8521_CHIP_CONFIG_REG,
827 YT8521_CCR_RXC_DLY_EN, rxc_dly_en);
828 if (ret < 0)
829 return ret;
830
831 /* Generally, it is not necessary to adjust YT8521_RC1R_FE_TX_DELAY */
832 mask = YT8521_RC1R_RX_DELAY_MASK | YT8521_RC1R_GE_TX_DELAY_MASK;
833 return ytphy_modify_ext(phydev, YT8521_RGMII_CONFIG1_REG, mask, val);
834 }
835
ytphy_rgmii_clk_delay_config_with_lock(struct phy_device * phydev)836 static int ytphy_rgmii_clk_delay_config_with_lock(struct phy_device *phydev)
837 {
838 int ret;
839
840 phy_lock_mdio_bus(phydev);
841 ret = ytphy_rgmii_clk_delay_config(phydev);
842 phy_unlock_mdio_bus(phydev);
843
844 return ret;
845 }
846
847 /**
848 * struct ytphy_ldo_vol_map - map a current value to a register value
849 * @vol: ldo voltage
850 * @ds: value in the register
851 * @cur: value in device configuration
852 */
853 struct ytphy_ldo_vol_map {
854 u32 vol;
855 u32 ds;
856 u32 cur;
857 };
858
859 static const struct ytphy_ldo_vol_map yt8531_ldo_vol[] = {
860 {.vol = YT8531_LDO_VOL_1V8, .ds = 0, .cur = 1200},
861 {.vol = YT8531_LDO_VOL_1V8, .ds = 1, .cur = 2100},
862 {.vol = YT8531_LDO_VOL_1V8, .ds = 2, .cur = 2700},
863 {.vol = YT8531_LDO_VOL_1V8, .ds = 3, .cur = 2910},
864 {.vol = YT8531_LDO_VOL_1V8, .ds = 4, .cur = 3110},
865 {.vol = YT8531_LDO_VOL_1V8, .ds = 5, .cur = 3600},
866 {.vol = YT8531_LDO_VOL_1V8, .ds = 6, .cur = 3970},
867 {.vol = YT8531_LDO_VOL_1V8, .ds = 7, .cur = 4350},
868 {.vol = YT8531_LDO_VOL_3V3, .ds = 0, .cur = 3070},
869 {.vol = YT8531_LDO_VOL_3V3, .ds = 1, .cur = 4080},
870 {.vol = YT8531_LDO_VOL_3V3, .ds = 2, .cur = 4370},
871 {.vol = YT8531_LDO_VOL_3V3, .ds = 3, .cur = 4680},
872 {.vol = YT8531_LDO_VOL_3V3, .ds = 4, .cur = 5020},
873 {.vol = YT8531_LDO_VOL_3V3, .ds = 5, .cur = 5450},
874 {.vol = YT8531_LDO_VOL_3V3, .ds = 6, .cur = 5740},
875 {.vol = YT8531_LDO_VOL_3V3, .ds = 7, .cur = 6140},
876 };
877
yt8531_get_ldo_vol(struct phy_device * phydev)878 static u32 yt8531_get_ldo_vol(struct phy_device *phydev)
879 {
880 u32 val;
881
882 val = ytphy_read_ext_with_lock(phydev, YT8521_CHIP_CONFIG_REG);
883 val = FIELD_GET(YT8531_RGMII_LDO_VOL_MASK, val);
884
885 return val <= YT8531_LDO_VOL_1V8 ? val : YT8531_LDO_VOL_1V8;
886 }
887
yt8531_get_ds_map(struct phy_device * phydev,u32 cur)888 static int yt8531_get_ds_map(struct phy_device *phydev, u32 cur)
889 {
890 u32 vol;
891 int i;
892
893 vol = yt8531_get_ldo_vol(phydev);
894 for (i = 0; i < ARRAY_SIZE(yt8531_ldo_vol); i++) {
895 if (yt8531_ldo_vol[i].vol == vol && yt8531_ldo_vol[i].cur == cur)
896 return yt8531_ldo_vol[i].ds;
897 }
898
899 return -EINVAL;
900 }
901
yt8531_set_ds(struct phy_device * phydev)902 static int yt8531_set_ds(struct phy_device *phydev)
903 {
904 struct device_node *node = phydev->mdio.dev.of_node;
905 u32 ds_field_low, ds_field_hi, val;
906 int ret, ds;
907
908 /* set rgmii rx clk driver strength */
909 if (!of_property_read_u32(node, "motorcomm,rx-clk-drv-microamp", &val)) {
910 ds = yt8531_get_ds_map(phydev, val);
911 if (ds < 0)
912 return dev_err_probe(&phydev->mdio.dev, ds,
913 "No matching current value was found.\n");
914 } else {
915 ds = YT8531_RGMII_RX_DS_DEFAULT;
916 }
917
918 ret = ytphy_modify_ext_with_lock(phydev,
919 YTPHY_PAD_DRIVE_STRENGTH_REG,
920 YT8531_RGMII_RXC_DS_MASK,
921 FIELD_PREP(YT8531_RGMII_RXC_DS_MASK, ds));
922 if (ret < 0)
923 return ret;
924
925 /* set rgmii rx data driver strength */
926 if (!of_property_read_u32(node, "motorcomm,rx-data-drv-microamp", &val)) {
927 ds = yt8531_get_ds_map(phydev, val);
928 if (ds < 0)
929 return dev_err_probe(&phydev->mdio.dev, ds,
930 "No matching current value was found.\n");
931 } else {
932 ds = YT8531_RGMII_RX_DS_DEFAULT;
933 }
934
935 ds_field_hi = FIELD_GET(BIT(2), ds);
936 ds_field_hi = FIELD_PREP(YT8531_RGMII_RXD_DS_HI_MASK, ds_field_hi);
937
938 ds_field_low = FIELD_GET(GENMASK(1, 0), ds);
939 ds_field_low = FIELD_PREP(YT8531_RGMII_RXD_DS_LOW_MASK, ds_field_low);
940
941 ret = ytphy_modify_ext_with_lock(phydev,
942 YTPHY_PAD_DRIVE_STRENGTH_REG,
943 YT8531_RGMII_RXD_DS_LOW_MASK | YT8531_RGMII_RXD_DS_HI_MASK,
944 ds_field_low | ds_field_hi);
945 if (ret < 0)
946 return ret;
947
948 return 0;
949 }
950
951 /**
952 * yt8521_probe() - read chip config then set suitable polling_mode
953 * @phydev: a pointer to a &struct phy_device
954 *
955 * returns 0 or negative errno code
956 */
yt8521_probe(struct phy_device * phydev)957 static int yt8521_probe(struct phy_device *phydev)
958 {
959 struct device_node *node = phydev->mdio.dev.of_node;
960 struct device *dev = &phydev->mdio.dev;
961 struct yt8521_priv *priv;
962 int chip_config;
963 u16 mask, val;
964 u32 freq;
965 int ret;
966
967 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
968 if (!priv)
969 return -ENOMEM;
970
971 phydev->priv = priv;
972
973 chip_config = ytphy_read_ext_with_lock(phydev, YT8521_CHIP_CONFIG_REG);
974 if (chip_config < 0)
975 return chip_config;
976
977 priv->strap_mode = chip_config & YT8521_CCR_MODE_SEL_MASK;
978 switch (priv->strap_mode) {
979 case YT8521_CCR_MODE_FIBER_TO_RGMII:
980 case YT8521_CCR_MODE_SGPHY_TO_RGMAC:
981 case YT8521_CCR_MODE_SGMAC_TO_RGPHY:
982 priv->polling_mode = YT8521_MODE_FIBER;
983 priv->reg_page = YT8521_RSSR_FIBER_SPACE;
984 phydev->port = PORT_FIBRE;
985 break;
986 case YT8521_CCR_MODE_UTP_FIBER_TO_RGMII:
987 case YT8521_CCR_MODE_UTP_TO_FIBER_AUTO:
988 case YT8521_CCR_MODE_UTP_TO_FIBER_FORCE:
989 priv->polling_mode = YT8521_MODE_POLL;
990 priv->reg_page = YT8521_RSSR_TO_BE_ARBITRATED;
991 phydev->port = PORT_NONE;
992 break;
993 case YT8521_CCR_MODE_UTP_TO_SGMII:
994 case YT8521_CCR_MODE_UTP_TO_RGMII:
995 priv->polling_mode = YT8521_MODE_UTP;
996 priv->reg_page = YT8521_RSSR_UTP_SPACE;
997 phydev->port = PORT_TP;
998 break;
999 }
1000 /* set default reg space */
1001 if (priv->reg_page != YT8521_RSSR_TO_BE_ARBITRATED) {
1002 ret = ytphy_write_ext_with_lock(phydev,
1003 YT8521_REG_SPACE_SELECT_REG,
1004 priv->reg_page);
1005 if (ret < 0)
1006 return ret;
1007 }
1008
1009 if (of_property_read_u32(node, "motorcomm,clk-out-frequency-hz", &freq))
1010 freq = YTPHY_DTS_OUTPUT_CLK_DIS;
1011
1012 if (phydev->drv->phy_id == PHY_ID_YT8521) {
1013 switch (freq) {
1014 case YTPHY_DTS_OUTPUT_CLK_DIS:
1015 mask = YT8521_SCR_SYNCE_ENABLE;
1016 val = 0;
1017 break;
1018 case YTPHY_DTS_OUTPUT_CLK_25M:
1019 mask = YT8521_SCR_SYNCE_ENABLE |
1020 YT8521_SCR_CLK_SRC_MASK |
1021 YT8521_SCR_CLK_FRE_SEL_125M;
1022 val = YT8521_SCR_SYNCE_ENABLE |
1023 FIELD_PREP(YT8521_SCR_CLK_SRC_MASK,
1024 YT8521_SCR_CLK_SRC_REF_25M);
1025 break;
1026 case YTPHY_DTS_OUTPUT_CLK_125M:
1027 mask = YT8521_SCR_SYNCE_ENABLE |
1028 YT8521_SCR_CLK_SRC_MASK |
1029 YT8521_SCR_CLK_FRE_SEL_125M;
1030 val = YT8521_SCR_SYNCE_ENABLE |
1031 YT8521_SCR_CLK_FRE_SEL_125M |
1032 FIELD_PREP(YT8521_SCR_CLK_SRC_MASK,
1033 YT8521_SCR_CLK_SRC_PLL_125M);
1034 break;
1035 default:
1036 phydev_warn(phydev, "Freq err:%u\n", freq);
1037 return -EINVAL;
1038 }
1039 } else if (phydev->drv->phy_id == PHY_ID_YT8531S) {
1040 switch (freq) {
1041 case YTPHY_DTS_OUTPUT_CLK_DIS:
1042 mask = YT8531_SCR_SYNCE_ENABLE;
1043 val = 0;
1044 break;
1045 case YTPHY_DTS_OUTPUT_CLK_25M:
1046 mask = YT8531_SCR_SYNCE_ENABLE |
1047 YT8531_SCR_CLK_SRC_MASK |
1048 YT8531_SCR_CLK_FRE_SEL_125M;
1049 val = YT8531_SCR_SYNCE_ENABLE |
1050 FIELD_PREP(YT8531_SCR_CLK_SRC_MASK,
1051 YT8531_SCR_CLK_SRC_REF_25M);
1052 break;
1053 case YTPHY_DTS_OUTPUT_CLK_125M:
1054 mask = YT8531_SCR_SYNCE_ENABLE |
1055 YT8531_SCR_CLK_SRC_MASK |
1056 YT8531_SCR_CLK_FRE_SEL_125M;
1057 val = YT8531_SCR_SYNCE_ENABLE |
1058 YT8531_SCR_CLK_FRE_SEL_125M |
1059 FIELD_PREP(YT8531_SCR_CLK_SRC_MASK,
1060 YT8531_SCR_CLK_SRC_PLL_125M);
1061 break;
1062 default:
1063 phydev_warn(phydev, "Freq err:%u\n", freq);
1064 return -EINVAL;
1065 }
1066 } else {
1067 phydev_warn(phydev, "PHY id err\n");
1068 return -EINVAL;
1069 }
1070
1071 return ytphy_modify_ext_with_lock(phydev, YTPHY_SYNCE_CFG_REG, mask,
1072 val);
1073 }
1074
yt8531_probe(struct phy_device * phydev)1075 static int yt8531_probe(struct phy_device *phydev)
1076 {
1077 struct device_node *node = phydev->mdio.dev.of_node;
1078 u16 mask, val;
1079 u32 freq;
1080
1081 if (of_property_read_u32(node, "motorcomm,clk-out-frequency-hz", &freq))
1082 freq = YTPHY_DTS_OUTPUT_CLK_DIS;
1083
1084 switch (freq) {
1085 case YTPHY_DTS_OUTPUT_CLK_DIS:
1086 mask = YT8531_SCR_SYNCE_ENABLE;
1087 val = 0;
1088 break;
1089 case YTPHY_DTS_OUTPUT_CLK_25M:
1090 mask = YT8531_SCR_SYNCE_ENABLE | YT8531_SCR_CLK_SRC_MASK |
1091 YT8531_SCR_CLK_FRE_SEL_125M;
1092 val = YT8531_SCR_SYNCE_ENABLE |
1093 FIELD_PREP(YT8531_SCR_CLK_SRC_MASK,
1094 YT8531_SCR_CLK_SRC_REF_25M);
1095 break;
1096 case YTPHY_DTS_OUTPUT_CLK_125M:
1097 mask = YT8531_SCR_SYNCE_ENABLE | YT8531_SCR_CLK_SRC_MASK |
1098 YT8531_SCR_CLK_FRE_SEL_125M;
1099 val = YT8531_SCR_SYNCE_ENABLE | YT8531_SCR_CLK_FRE_SEL_125M |
1100 FIELD_PREP(YT8531_SCR_CLK_SRC_MASK,
1101 YT8531_SCR_CLK_SRC_PLL_125M);
1102 break;
1103 default:
1104 phydev_warn(phydev, "Freq err:%u\n", freq);
1105 return -EINVAL;
1106 }
1107
1108 return ytphy_modify_ext_with_lock(phydev, YTPHY_SYNCE_CFG_REG, mask,
1109 val);
1110 }
1111
1112 /**
1113 * ytphy_utp_read_lpa() - read LPA then setup lp_advertising for utp
1114 * @phydev: a pointer to a &struct phy_device
1115 *
1116 * NOTE:The caller must have taken the MDIO bus lock.
1117 *
1118 * returns 0 or negative errno code
1119 */
ytphy_utp_read_lpa(struct phy_device * phydev)1120 static int ytphy_utp_read_lpa(struct phy_device *phydev)
1121 {
1122 int lpa, lpagb;
1123
1124 if (phydev->autoneg == AUTONEG_ENABLE) {
1125 if (!phydev->autoneg_complete) {
1126 mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising,
1127 0);
1128 mii_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, 0);
1129 return 0;
1130 }
1131
1132 if (phydev->is_gigabit_capable) {
1133 lpagb = __phy_read(phydev, MII_STAT1000);
1134 if (lpagb < 0)
1135 return lpagb;
1136
1137 if (lpagb & LPA_1000MSFAIL) {
1138 int adv = __phy_read(phydev, MII_CTRL1000);
1139
1140 if (adv < 0)
1141 return adv;
1142
1143 if (adv & CTL1000_ENABLE_MASTER)
1144 phydev_err(phydev, "Master/Slave resolution failed, maybe conflicting manual settings?\n");
1145 else
1146 phydev_err(phydev, "Master/Slave resolution failed\n");
1147 return -ENOLINK;
1148 }
1149
1150 mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising,
1151 lpagb);
1152 }
1153
1154 lpa = __phy_read(phydev, MII_LPA);
1155 if (lpa < 0)
1156 return lpa;
1157
1158 mii_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, lpa);
1159 } else {
1160 linkmode_zero(phydev->lp_advertising);
1161 }
1162
1163 return 0;
1164 }
1165
1166 /**
1167 * yt8521_adjust_status() - update speed and duplex to phydev. when in fiber
1168 * mode, adjust speed and duplex.
1169 * @phydev: a pointer to a &struct phy_device
1170 * @status: yt8521 status read from YTPHY_SPECIFIC_STATUS_REG
1171 * @is_utp: false(yt8521 work in fiber mode) or true(yt8521 work in utp mode)
1172 *
1173 * NOTE:The caller must have taken the MDIO bus lock.
1174 *
1175 * returns 0
1176 */
yt8521_adjust_status(struct phy_device * phydev,int status,bool is_utp)1177 static int yt8521_adjust_status(struct phy_device *phydev, int status,
1178 bool is_utp)
1179 {
1180 int speed_mode, duplex;
1181 int speed;
1182 int err;
1183 int lpa;
1184
1185 if (is_utp)
1186 duplex = (status & YTPHY_SSR_DUPLEX) >> YTPHY_SSR_DUPLEX_OFFSET;
1187 else
1188 duplex = DUPLEX_FULL; /* for fiber, it always DUPLEX_FULL */
1189
1190 speed_mode = (status & YTPHY_SSR_SPEED_MODE_MASK) >>
1191 YTPHY_SSR_SPEED_MODE_OFFSET;
1192
1193 switch (speed_mode) {
1194 case YTPHY_SSR_SPEED_10M:
1195 if (is_utp)
1196 speed = SPEED_10;
1197 else
1198 /* for fiber, it will never run here, default to
1199 * SPEED_UNKNOWN
1200 */
1201 speed = SPEED_UNKNOWN;
1202 break;
1203 case YTPHY_SSR_SPEED_100M:
1204 speed = SPEED_100;
1205 break;
1206 case YTPHY_SSR_SPEED_1000M:
1207 speed = SPEED_1000;
1208 break;
1209 default:
1210 speed = SPEED_UNKNOWN;
1211 break;
1212 }
1213
1214 phydev->speed = speed;
1215 phydev->duplex = duplex;
1216
1217 if (is_utp) {
1218 err = ytphy_utp_read_lpa(phydev);
1219 if (err < 0)
1220 return err;
1221
1222 phy_resolve_aneg_pause(phydev);
1223 } else {
1224 lpa = __phy_read(phydev, MII_LPA);
1225 if (lpa < 0)
1226 return lpa;
1227
1228 /* only support 1000baseX Full */
1229 linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT,
1230 phydev->lp_advertising, lpa & LPA_1000XFULL);
1231
1232 if (!(lpa & YTPHY_FLPA_PAUSE)) {
1233 phydev->pause = 0;
1234 phydev->asym_pause = 0;
1235 } else if ((lpa & YTPHY_FLPA_ASYM_PAUSE)) {
1236 phydev->pause = 1;
1237 phydev->asym_pause = 1;
1238 } else {
1239 phydev->pause = 1;
1240 phydev->asym_pause = 0;
1241 }
1242 }
1243
1244 return 0;
1245 }
1246
1247 /**
1248 * yt8521_read_status_paged() - determines the speed and duplex of one page
1249 * @phydev: a pointer to a &struct phy_device
1250 * @page: The reg page(YT8521_RSSR_FIBER_SPACE/YT8521_RSSR_UTP_SPACE) to
1251 * operate.
1252 *
1253 * returns 1 (utp or fiber link),0 (no link) or negative errno code
1254 */
yt8521_read_status_paged(struct phy_device * phydev,int page)1255 static int yt8521_read_status_paged(struct phy_device *phydev, int page)
1256 {
1257 int fiber_latch_val;
1258 int fiber_curr_val;
1259 int old_page;
1260 int ret = 0;
1261 int status;
1262 int link;
1263
1264 linkmode_zero(phydev->lp_advertising);
1265 phydev->duplex = DUPLEX_UNKNOWN;
1266 phydev->speed = SPEED_UNKNOWN;
1267 phydev->asym_pause = 0;
1268 phydev->pause = 0;
1269
1270 /* YT8521 has two reg space (utp/fiber) for linkup with utp/fiber
1271 * respectively. but for utp/fiber combo mode, reg space should be
1272 * arbitrated based on media priority. by default, utp takes
1273 * priority. reg space should be properly set before read
1274 * YTPHY_SPECIFIC_STATUS_REG.
1275 */
1276
1277 page &= YT8521_RSSR_SPACE_MASK;
1278 old_page = phy_select_page(phydev, page);
1279 if (old_page < 0)
1280 goto err_restore_page;
1281
1282 /* Read YTPHY_SPECIFIC_STATUS_REG, which indicates the speed and duplex
1283 * of the PHY is actually using.
1284 */
1285 ret = __phy_read(phydev, YTPHY_SPECIFIC_STATUS_REG);
1286 if (ret < 0)
1287 goto err_restore_page;
1288
1289 status = ret;
1290 link = !!(status & YTPHY_SSR_LINK);
1291
1292 /* When PHY is in fiber mode, speed transferred from 1000Mbps to
1293 * 100Mbps,there is not link down from YTPHY_SPECIFIC_STATUS_REG, so
1294 * we need check MII_BMSR to identify such case.
1295 */
1296 if (page == YT8521_RSSR_FIBER_SPACE) {
1297 ret = __phy_read(phydev, MII_BMSR);
1298 if (ret < 0)
1299 goto err_restore_page;
1300
1301 fiber_latch_val = ret;
1302 ret = __phy_read(phydev, MII_BMSR);
1303 if (ret < 0)
1304 goto err_restore_page;
1305
1306 fiber_curr_val = ret;
1307 if (link && fiber_latch_val != fiber_curr_val) {
1308 link = 0;
1309 phydev_info(phydev,
1310 "%s, fiber link down detect, latch = %04x, curr = %04x\n",
1311 __func__, fiber_latch_val, fiber_curr_val);
1312 }
1313 } else {
1314 /* Read autonegotiation status */
1315 ret = __phy_read(phydev, MII_BMSR);
1316 if (ret < 0)
1317 goto err_restore_page;
1318
1319 phydev->autoneg_complete = ret & BMSR_ANEGCOMPLETE ? 1 : 0;
1320 }
1321
1322 if (link) {
1323 if (page == YT8521_RSSR_UTP_SPACE)
1324 yt8521_adjust_status(phydev, status, true);
1325 else
1326 yt8521_adjust_status(phydev, status, false);
1327 }
1328 return phy_restore_page(phydev, old_page, link);
1329
1330 err_restore_page:
1331 return phy_restore_page(phydev, old_page, ret);
1332 }
1333
1334 /**
1335 * yt8521_read_status() - determines the negotiated speed and duplex
1336 * @phydev: a pointer to a &struct phy_device
1337 *
1338 * returns 0 or negative errno code
1339 */
yt8521_read_status(struct phy_device * phydev)1340 static int yt8521_read_status(struct phy_device *phydev)
1341 {
1342 struct yt8521_priv *priv = phydev->priv;
1343 int link_fiber = 0;
1344 int link_utp;
1345 int link;
1346 int ret;
1347
1348 if (priv->reg_page != YT8521_RSSR_TO_BE_ARBITRATED) {
1349 link = yt8521_read_status_paged(phydev, priv->reg_page);
1350 if (link < 0)
1351 return link;
1352 } else {
1353 /* when page is YT8521_RSSR_TO_BE_ARBITRATED, arbitration is
1354 * needed. by default, utp is higher priority.
1355 */
1356
1357 link_utp = yt8521_read_status_paged(phydev,
1358 YT8521_RSSR_UTP_SPACE);
1359 if (link_utp < 0)
1360 return link_utp;
1361
1362 if (!link_utp) {
1363 link_fiber = yt8521_read_status_paged(phydev,
1364 YT8521_RSSR_FIBER_SPACE);
1365 if (link_fiber < 0)
1366 return link_fiber;
1367 }
1368
1369 link = link_utp || link_fiber;
1370 }
1371
1372 if (link) {
1373 if (phydev->link == 0) {
1374 /* arbitrate reg space based on linkup media type. */
1375 if (priv->polling_mode == YT8521_MODE_POLL &&
1376 priv->reg_page == YT8521_RSSR_TO_BE_ARBITRATED) {
1377 if (link_fiber)
1378 priv->reg_page =
1379 YT8521_RSSR_FIBER_SPACE;
1380 else
1381 priv->reg_page = YT8521_RSSR_UTP_SPACE;
1382
1383 ret = ytphy_write_ext_with_lock(phydev,
1384 YT8521_REG_SPACE_SELECT_REG,
1385 priv->reg_page);
1386 if (ret < 0)
1387 return ret;
1388
1389 phydev->port = link_fiber ? PORT_FIBRE : PORT_TP;
1390
1391 phydev_info(phydev, "%s, link up, media: %s\n",
1392 __func__,
1393 (phydev->port == PORT_TP) ?
1394 "UTP" : "Fiber");
1395 }
1396 }
1397 phydev->link = 1;
1398 } else {
1399 if (phydev->link == 1) {
1400 phydev_info(phydev, "%s, link down, media: %s\n",
1401 __func__, (phydev->port == PORT_TP) ?
1402 "UTP" : "Fiber");
1403
1404 /* When in YT8521_MODE_POLL mode, need prepare for next
1405 * arbitration.
1406 */
1407 if (priv->polling_mode == YT8521_MODE_POLL) {
1408 priv->reg_page = YT8521_RSSR_TO_BE_ARBITRATED;
1409 phydev->port = PORT_NONE;
1410 }
1411 }
1412
1413 phydev->link = 0;
1414 }
1415
1416 return 0;
1417 }
1418
1419 /**
1420 * yt8521_modify_bmcr_paged - bits modify a PHY's BMCR register of one page
1421 * @phydev: the phy_device struct
1422 * @page: The reg page(YT8521_RSSR_FIBER_SPACE/YT8521_RSSR_UTP_SPACE) to operate
1423 * @mask: bit mask of bits to clear
1424 * @set: bit mask of bits to set
1425 *
1426 * NOTE: Convenience function which allows a PHY's BMCR register to be
1427 * modified as new register value = (old register value & ~mask) | set.
1428 * YT8521 has two space (utp/fiber) and three mode (utp/fiber/poll), each space
1429 * has MII_BMCR. poll mode combines utp and faber,so need do both.
1430 * If it is reset, it will wait for completion.
1431 *
1432 * returns 0 or negative errno code
1433 */
yt8521_modify_bmcr_paged(struct phy_device * phydev,int page,u16 mask,u16 set)1434 static int yt8521_modify_bmcr_paged(struct phy_device *phydev, int page,
1435 u16 mask, u16 set)
1436 {
1437 int max_cnt = 500; /* the max wait time of reset ~ 500 ms */
1438 int old_page;
1439 int ret = 0;
1440
1441 old_page = phy_select_page(phydev, page & YT8521_RSSR_SPACE_MASK);
1442 if (old_page < 0)
1443 goto err_restore_page;
1444
1445 ret = __phy_modify(phydev, MII_BMCR, mask, set);
1446 if (ret < 0)
1447 goto err_restore_page;
1448
1449 /* If it is reset, need to wait for the reset to complete */
1450 if (set == BMCR_RESET) {
1451 while (max_cnt--) {
1452 usleep_range(1000, 1100);
1453 ret = __phy_read(phydev, MII_BMCR);
1454 if (ret < 0)
1455 goto err_restore_page;
1456
1457 if (!(ret & BMCR_RESET))
1458 return phy_restore_page(phydev, old_page, 0);
1459 }
1460 }
1461
1462 err_restore_page:
1463 return phy_restore_page(phydev, old_page, ret);
1464 }
1465
1466 /**
1467 * yt8521_modify_utp_fiber_bmcr - bits modify a PHY's BMCR register
1468 * @phydev: the phy_device struct
1469 * @mask: bit mask of bits to clear
1470 * @set: bit mask of bits to set
1471 *
1472 * NOTE: Convenience function which allows a PHY's BMCR register to be
1473 * modified as new register value = (old register value & ~mask) | set.
1474 * YT8521 has two space (utp/fiber) and three mode (utp/fiber/poll), each space
1475 * has MII_BMCR. poll mode combines utp and faber,so need do both.
1476 *
1477 * returns 0 or negative errno code
1478 */
yt8521_modify_utp_fiber_bmcr(struct phy_device * phydev,u16 mask,u16 set)1479 static int yt8521_modify_utp_fiber_bmcr(struct phy_device *phydev, u16 mask,
1480 u16 set)
1481 {
1482 struct yt8521_priv *priv = phydev->priv;
1483 int ret;
1484
1485 if (priv->reg_page != YT8521_RSSR_TO_BE_ARBITRATED) {
1486 ret = yt8521_modify_bmcr_paged(phydev, priv->reg_page, mask,
1487 set);
1488 if (ret < 0)
1489 return ret;
1490 } else {
1491 ret = yt8521_modify_bmcr_paged(phydev, YT8521_RSSR_UTP_SPACE,
1492 mask, set);
1493 if (ret < 0)
1494 return ret;
1495
1496 ret = yt8521_modify_bmcr_paged(phydev, YT8521_RSSR_FIBER_SPACE,
1497 mask, set);
1498 if (ret < 0)
1499 return ret;
1500 }
1501 return 0;
1502 }
1503
1504 /**
1505 * yt8521_soft_reset() - called to issue a PHY software reset
1506 * @phydev: a pointer to a &struct phy_device
1507 *
1508 * returns 0 or negative errno code
1509 */
yt8521_soft_reset(struct phy_device * phydev)1510 static int yt8521_soft_reset(struct phy_device *phydev)
1511 {
1512 return yt8521_modify_utp_fiber_bmcr(phydev, 0, BMCR_RESET);
1513 }
1514
1515 /**
1516 * yt8521_suspend() - suspend the hardware
1517 * @phydev: a pointer to a &struct phy_device
1518 *
1519 * returns 0 or negative errno code
1520 */
yt8521_suspend(struct phy_device * phydev)1521 static int yt8521_suspend(struct phy_device *phydev)
1522 {
1523 int wol_config;
1524
1525 /* YTPHY_WOL_CONFIG_REG is common ext reg */
1526 wol_config = ytphy_read_ext_with_lock(phydev, YTPHY_WOL_CONFIG_REG);
1527 if (wol_config < 0)
1528 return wol_config;
1529
1530 /* if wol enable, do nothing */
1531 if (wol_config & YTPHY_WCR_ENABLE)
1532 return 0;
1533
1534 return yt8521_modify_utp_fiber_bmcr(phydev, 0, BMCR_PDOWN);
1535 }
1536
1537 /**
1538 * yt8521_resume() - resume the hardware
1539 * @phydev: a pointer to a &struct phy_device
1540 *
1541 * returns 0 or negative errno code
1542 */
yt8521_resume(struct phy_device * phydev)1543 static int yt8521_resume(struct phy_device *phydev)
1544 {
1545 int ret;
1546 int wol_config;
1547
1548 /* disable auto sleep */
1549 ret = ytphy_modify_ext_with_lock(phydev,
1550 YT8521_EXTREG_SLEEP_CONTROL1_REG,
1551 YT8521_ESC1R_SLEEP_SW, 0);
1552 if (ret < 0)
1553 return ret;
1554
1555 wol_config = ytphy_read_ext_with_lock(phydev, YTPHY_WOL_CONFIG_REG);
1556 if (wol_config < 0)
1557 return wol_config;
1558
1559 /* if wol enable, do nothing */
1560 if (wol_config & YTPHY_WCR_ENABLE)
1561 return 0;
1562
1563 return yt8521_modify_utp_fiber_bmcr(phydev, BMCR_PDOWN, 0);
1564 }
1565
1566 /**
1567 * yt8521_config_init() - called to initialize the PHY
1568 * @phydev: a pointer to a &struct phy_device
1569 *
1570 * returns 0 or negative errno code
1571 */
yt8521_config_init(struct phy_device * phydev)1572 static int yt8521_config_init(struct phy_device *phydev)
1573 {
1574 struct device_node *node = phydev->mdio.dev.of_node;
1575 int old_page;
1576 int ret = 0;
1577
1578 old_page = phy_select_page(phydev, YT8521_RSSR_UTP_SPACE);
1579 if (old_page < 0)
1580 goto err_restore_page;
1581
1582 /* set rgmii delay mode */
1583 if (phydev->interface != PHY_INTERFACE_MODE_SGMII) {
1584 ret = ytphy_rgmii_clk_delay_config(phydev);
1585 if (ret < 0)
1586 goto err_restore_page;
1587 }
1588
1589 if (of_property_read_bool(node, "motorcomm,auto-sleep-disabled")) {
1590 /* disable auto sleep */
1591 ret = ytphy_modify_ext(phydev, YT8521_EXTREG_SLEEP_CONTROL1_REG,
1592 YT8521_ESC1R_SLEEP_SW, 0);
1593 if (ret < 0)
1594 goto err_restore_page;
1595 }
1596
1597 if (of_property_read_bool(node, "motorcomm,keep-pll-enabled")) {
1598 /* enable RXC clock when no wire plug */
1599 ret = ytphy_modify_ext(phydev, YT8521_CLOCK_GATING_REG,
1600 YT8521_CGR_RX_CLK_EN, 0);
1601 if (ret < 0)
1602 goto err_restore_page;
1603 }
1604 err_restore_page:
1605 return phy_restore_page(phydev, old_page, ret);
1606 }
1607
yt8531_config_init(struct phy_device * phydev)1608 static int yt8531_config_init(struct phy_device *phydev)
1609 {
1610 struct device_node *node = phydev->mdio.dev.of_node;
1611 int ret;
1612
1613 ret = ytphy_rgmii_clk_delay_config_with_lock(phydev);
1614 if (ret < 0)
1615 return ret;
1616
1617 if (of_property_read_bool(node, "motorcomm,auto-sleep-disabled")) {
1618 /* disable auto sleep */
1619 ret = ytphy_modify_ext_with_lock(phydev,
1620 YT8521_EXTREG_SLEEP_CONTROL1_REG,
1621 YT8521_ESC1R_SLEEP_SW, 0);
1622 if (ret < 0)
1623 return ret;
1624 }
1625
1626 if (of_property_read_bool(node, "motorcomm,keep-pll-enabled")) {
1627 /* enable RXC clock when no wire plug */
1628 ret = ytphy_modify_ext_with_lock(phydev,
1629 YT8521_CLOCK_GATING_REG,
1630 YT8521_CGR_RX_CLK_EN, 0);
1631 if (ret < 0)
1632 return ret;
1633 }
1634
1635 ret = yt8531_set_ds(phydev);
1636 if (ret < 0)
1637 return ret;
1638
1639 return 0;
1640 }
1641
1642 /**
1643 * yt8531_link_change_notify() - Adjust the tx clock direction according to
1644 * the current speed and dts config.
1645 * @phydev: a pointer to a &struct phy_device
1646 *
1647 * NOTE: This function is only used to adapt to VF2 with JH7110 SoC. Please
1648 * keep "motorcomm,tx-clk-adj-enabled" not exist in dts when the soc is not
1649 * JH7110.
1650 */
yt8531_link_change_notify(struct phy_device * phydev)1651 static void yt8531_link_change_notify(struct phy_device *phydev)
1652 {
1653 struct device_node *node = phydev->mdio.dev.of_node;
1654 bool tx_clk_1000_inverted = false;
1655 bool tx_clk_100_inverted = false;
1656 bool tx_clk_10_inverted = false;
1657 bool tx_clk_adj_enabled = false;
1658 u16 val = 0;
1659 int ret;
1660
1661 if (of_property_read_bool(node, "motorcomm,tx-clk-adj-enabled"))
1662 tx_clk_adj_enabled = true;
1663
1664 if (!tx_clk_adj_enabled)
1665 return;
1666
1667 if (of_property_read_bool(node, "motorcomm,tx-clk-10-inverted"))
1668 tx_clk_10_inverted = true;
1669 if (of_property_read_bool(node, "motorcomm,tx-clk-100-inverted"))
1670 tx_clk_100_inverted = true;
1671 if (of_property_read_bool(node, "motorcomm,tx-clk-1000-inverted"))
1672 tx_clk_1000_inverted = true;
1673
1674 if (phydev->speed < 0)
1675 return;
1676
1677 switch (phydev->speed) {
1678 case SPEED_1000:
1679 if (tx_clk_1000_inverted)
1680 val = YT8521_RC1R_TX_CLK_SEL_INVERTED;
1681 break;
1682 case SPEED_100:
1683 if (tx_clk_100_inverted)
1684 val = YT8521_RC1R_TX_CLK_SEL_INVERTED;
1685 break;
1686 case SPEED_10:
1687 if (tx_clk_10_inverted)
1688 val = YT8521_RC1R_TX_CLK_SEL_INVERTED;
1689 break;
1690 default:
1691 return;
1692 }
1693
1694 ret = ytphy_modify_ext_with_lock(phydev, YT8521_RGMII_CONFIG1_REG,
1695 YT8521_RC1R_TX_CLK_SEL_INVERTED, val);
1696 if (ret < 0)
1697 phydev_warn(phydev, "Modify TX_CLK_SEL err:%d\n", ret);
1698 }
1699
1700 /**
1701 * yt8521_prepare_fiber_features() - A small helper function that setup
1702 * fiber's features.
1703 * @phydev: a pointer to a &struct phy_device
1704 * @dst: a pointer to store fiber's features
1705 */
yt8521_prepare_fiber_features(struct phy_device * phydev,unsigned long * dst)1706 static void yt8521_prepare_fiber_features(struct phy_device *phydev,
1707 unsigned long *dst)
1708 {
1709 linkmode_set_bit(ETHTOOL_LINK_MODE_100baseFX_Full_BIT, dst);
1710 linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, dst);
1711 linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, dst);
1712 linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, dst);
1713 }
1714
1715 /**
1716 * yt8521_fiber_setup_forced - configures/forces speed from @phydev
1717 * @phydev: target phy_device struct
1718 *
1719 * NOTE:The caller must have taken the MDIO bus lock.
1720 *
1721 * returns 0 or negative errno code
1722 */
yt8521_fiber_setup_forced(struct phy_device * phydev)1723 static int yt8521_fiber_setup_forced(struct phy_device *phydev)
1724 {
1725 u16 val;
1726 int ret;
1727
1728 if (phydev->speed == SPEED_1000)
1729 val = YTPHY_MCR_FIBER_1000BX;
1730 else if (phydev->speed == SPEED_100)
1731 val = YTPHY_MCR_FIBER_100FX;
1732 else
1733 return -EINVAL;
1734
1735 ret = __phy_modify(phydev, MII_BMCR, BMCR_ANENABLE, 0);
1736 if (ret < 0)
1737 return ret;
1738
1739 /* disable Fiber auto sensing */
1740 ret = ytphy_modify_ext(phydev, YT8521_LINK_TIMER_CFG2_REG,
1741 YT8521_LTCR_EN_AUTOSEN, 0);
1742 if (ret < 0)
1743 return ret;
1744
1745 ret = ytphy_modify_ext(phydev, YTPHY_MISC_CONFIG_REG,
1746 YTPHY_MCR_FIBER_SPEED_MASK, val);
1747 if (ret < 0)
1748 return ret;
1749
1750 return ytphy_modify_ext(phydev, YT8521_CHIP_CONFIG_REG,
1751 YT8521_CCR_SW_RST, 0);
1752 }
1753
1754 /**
1755 * ytphy_check_and_restart_aneg - Enable and restart auto-negotiation
1756 * @phydev: target phy_device struct
1757 * @restart: whether aneg restart is requested
1758 *
1759 * NOTE:The caller must have taken the MDIO bus lock.
1760 *
1761 * returns 0 or negative errno code
1762 */
ytphy_check_and_restart_aneg(struct phy_device * phydev,bool restart)1763 static int ytphy_check_and_restart_aneg(struct phy_device *phydev, bool restart)
1764 {
1765 int ret;
1766
1767 if (!restart) {
1768 /* Advertisement hasn't changed, but maybe aneg was never on to
1769 * begin with? Or maybe phy was isolated?
1770 */
1771 ret = __phy_read(phydev, MII_BMCR);
1772 if (ret < 0)
1773 return ret;
1774
1775 if (!(ret & BMCR_ANENABLE) || (ret & BMCR_ISOLATE))
1776 restart = true;
1777 }
1778 /* Enable and Restart Autonegotiation
1779 * Don't isolate the PHY if we're negotiating
1780 */
1781 if (restart)
1782 return __phy_modify(phydev, MII_BMCR, BMCR_ISOLATE,
1783 BMCR_ANENABLE | BMCR_ANRESTART);
1784
1785 return 0;
1786 }
1787
1788 /**
1789 * yt8521_fiber_config_aneg - restart auto-negotiation or write
1790 * YTPHY_MISC_CONFIG_REG.
1791 * @phydev: target phy_device struct
1792 *
1793 * NOTE:The caller must have taken the MDIO bus lock.
1794 *
1795 * returns 0 or negative errno code
1796 */
yt8521_fiber_config_aneg(struct phy_device * phydev)1797 static int yt8521_fiber_config_aneg(struct phy_device *phydev)
1798 {
1799 int err, changed = 0;
1800 int bmcr;
1801 u16 adv;
1802
1803 if (phydev->autoneg != AUTONEG_ENABLE)
1804 return yt8521_fiber_setup_forced(phydev);
1805
1806 /* enable Fiber auto sensing */
1807 err = ytphy_modify_ext(phydev, YT8521_LINK_TIMER_CFG2_REG,
1808 0, YT8521_LTCR_EN_AUTOSEN);
1809 if (err < 0)
1810 return err;
1811
1812 err = ytphy_modify_ext(phydev, YT8521_CHIP_CONFIG_REG,
1813 YT8521_CCR_SW_RST, 0);
1814 if (err < 0)
1815 return err;
1816
1817 bmcr = __phy_read(phydev, MII_BMCR);
1818 if (bmcr < 0)
1819 return bmcr;
1820
1821 /* When it is coming from fiber forced mode, add bmcr power down
1822 * and power up to let aneg work fine.
1823 */
1824 if (!(bmcr & BMCR_ANENABLE)) {
1825 __phy_modify(phydev, MII_BMCR, 0, BMCR_PDOWN);
1826 usleep_range(1000, 1100);
1827 __phy_modify(phydev, MII_BMCR, BMCR_PDOWN, 0);
1828 }
1829
1830 adv = linkmode_adv_to_mii_adv_x(phydev->advertising,
1831 ETHTOOL_LINK_MODE_1000baseX_Full_BIT);
1832
1833 /* Setup fiber advertisement */
1834 err = __phy_modify_changed(phydev, MII_ADVERTISE,
1835 ADVERTISE_1000XHALF | ADVERTISE_1000XFULL |
1836 ADVERTISE_1000XPAUSE |
1837 ADVERTISE_1000XPSE_ASYM,
1838 adv);
1839 if (err < 0)
1840 return err;
1841
1842 if (err > 0)
1843 changed = 1;
1844
1845 return ytphy_check_and_restart_aneg(phydev, changed);
1846 }
1847
1848 /**
1849 * ytphy_setup_master_slave
1850 * @phydev: target phy_device struct
1851 *
1852 * NOTE: The caller must have taken the MDIO bus lock.
1853 *
1854 * returns 0 or negative errno code
1855 */
ytphy_setup_master_slave(struct phy_device * phydev)1856 static int ytphy_setup_master_slave(struct phy_device *phydev)
1857 {
1858 u16 ctl = 0;
1859
1860 if (!phydev->is_gigabit_capable)
1861 return 0;
1862
1863 switch (phydev->master_slave_set) {
1864 case MASTER_SLAVE_CFG_MASTER_PREFERRED:
1865 ctl |= CTL1000_PREFER_MASTER;
1866 break;
1867 case MASTER_SLAVE_CFG_SLAVE_PREFERRED:
1868 break;
1869 case MASTER_SLAVE_CFG_MASTER_FORCE:
1870 ctl |= CTL1000_AS_MASTER;
1871 fallthrough;
1872 case MASTER_SLAVE_CFG_SLAVE_FORCE:
1873 ctl |= CTL1000_ENABLE_MASTER;
1874 break;
1875 case MASTER_SLAVE_CFG_UNKNOWN:
1876 case MASTER_SLAVE_CFG_UNSUPPORTED:
1877 return 0;
1878 default:
1879 phydev_warn(phydev, "Unsupported Master/Slave mode\n");
1880 return -EOPNOTSUPP;
1881 }
1882
1883 return __phy_modify_changed(phydev, MII_CTRL1000,
1884 (CTL1000_ENABLE_MASTER | CTL1000_AS_MASTER |
1885 CTL1000_PREFER_MASTER), ctl);
1886 }
1887
1888 /**
1889 * ytphy_utp_config_advert - sanitize and advertise auto-negotiation parameters
1890 * @phydev: target phy_device struct
1891 *
1892 * NOTE: Writes MII_ADVERTISE with the appropriate values,
1893 * after sanitizing the values to make sure we only advertise
1894 * what is supported. Returns < 0 on error, 0 if the PHY's advertisement
1895 * hasn't changed, and > 0 if it has changed.
1896 * The caller must have taken the MDIO bus lock.
1897 *
1898 * returns 0 or negative errno code
1899 */
ytphy_utp_config_advert(struct phy_device * phydev)1900 static int ytphy_utp_config_advert(struct phy_device *phydev)
1901 {
1902 int err, bmsr, changed = 0;
1903 u32 adv;
1904
1905 /* Only allow advertising what this PHY supports */
1906 linkmode_and(phydev->advertising, phydev->advertising,
1907 phydev->supported);
1908
1909 adv = linkmode_adv_to_mii_adv_t(phydev->advertising);
1910
1911 /* Setup standard advertisement */
1912 err = __phy_modify_changed(phydev, MII_ADVERTISE,
1913 ADVERTISE_ALL | ADVERTISE_100BASE4 |
1914 ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM,
1915 adv);
1916 if (err < 0)
1917 return err;
1918 if (err > 0)
1919 changed = 1;
1920
1921 bmsr = __phy_read(phydev, MII_BMSR);
1922 if (bmsr < 0)
1923 return bmsr;
1924
1925 /* Per 802.3-2008, Section 22.2.4.2.16 Extended status all
1926 * 1000Mbits/sec capable PHYs shall have the BMSR_ESTATEN bit set to a
1927 * logical 1.
1928 */
1929 if (!(bmsr & BMSR_ESTATEN))
1930 return changed;
1931
1932 adv = linkmode_adv_to_mii_ctrl1000_t(phydev->advertising);
1933
1934 err = __phy_modify_changed(phydev, MII_CTRL1000,
1935 ADVERTISE_1000FULL | ADVERTISE_1000HALF,
1936 adv);
1937 if (err < 0)
1938 return err;
1939 if (err > 0)
1940 changed = 1;
1941
1942 return changed;
1943 }
1944
1945 /**
1946 * ytphy_utp_config_aneg - restart auto-negotiation or write BMCR
1947 * @phydev: target phy_device struct
1948 * @changed: whether autoneg is requested
1949 *
1950 * NOTE: If auto-negotiation is enabled, we configure the
1951 * advertising, and then restart auto-negotiation. If it is not
1952 * enabled, then we write the BMCR.
1953 * The caller must have taken the MDIO bus lock.
1954 *
1955 * returns 0 or negative errno code
1956 */
ytphy_utp_config_aneg(struct phy_device * phydev,bool changed)1957 static int ytphy_utp_config_aneg(struct phy_device *phydev, bool changed)
1958 {
1959 int err;
1960 u16 ctl;
1961
1962 err = ytphy_setup_master_slave(phydev);
1963 if (err < 0)
1964 return err;
1965 else if (err)
1966 changed = true;
1967
1968 if (phydev->autoneg != AUTONEG_ENABLE) {
1969 /* configures/forces speed/duplex from @phydev */
1970
1971 ctl = mii_bmcr_encode_fixed(phydev->speed, phydev->duplex);
1972
1973 return __phy_modify(phydev, MII_BMCR, ~(BMCR_LOOPBACK |
1974 BMCR_ISOLATE | BMCR_PDOWN), ctl);
1975 }
1976
1977 err = ytphy_utp_config_advert(phydev);
1978 if (err < 0) /* error */
1979 return err;
1980 else if (err)
1981 changed = true;
1982
1983 return ytphy_check_and_restart_aneg(phydev, changed);
1984 }
1985
1986 /**
1987 * yt8521_config_aneg_paged() - switch reg space then call genphy_config_aneg
1988 * of one page
1989 * @phydev: a pointer to a &struct phy_device
1990 * @page: The reg page(YT8521_RSSR_FIBER_SPACE/YT8521_RSSR_UTP_SPACE) to
1991 * operate.
1992 *
1993 * returns 0 or negative errno code
1994 */
yt8521_config_aneg_paged(struct phy_device * phydev,int page)1995 static int yt8521_config_aneg_paged(struct phy_device *phydev, int page)
1996 {
1997 __ETHTOOL_DECLARE_LINK_MODE_MASK(fiber_supported);
1998 struct yt8521_priv *priv = phydev->priv;
1999 int old_page;
2000 int ret = 0;
2001
2002 page &= YT8521_RSSR_SPACE_MASK;
2003
2004 old_page = phy_select_page(phydev, page);
2005 if (old_page < 0)
2006 goto err_restore_page;
2007
2008 /* If reg_page is YT8521_RSSR_TO_BE_ARBITRATED,
2009 * phydev->advertising should be updated.
2010 */
2011 if (priv->reg_page == YT8521_RSSR_TO_BE_ARBITRATED) {
2012 linkmode_zero(fiber_supported);
2013 yt8521_prepare_fiber_features(phydev, fiber_supported);
2014
2015 /* prepare fiber_supported, then setup advertising. */
2016 if (page == YT8521_RSSR_FIBER_SPACE) {
2017 linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT,
2018 fiber_supported);
2019 linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
2020 fiber_supported);
2021 linkmode_and(phydev->advertising,
2022 priv->combo_advertising, fiber_supported);
2023 } else {
2024 /* ETHTOOL_LINK_MODE_Autoneg_BIT is also used in utp */
2025 linkmode_clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
2026 fiber_supported);
2027 linkmode_andnot(phydev->advertising,
2028 priv->combo_advertising,
2029 fiber_supported);
2030 }
2031 }
2032
2033 if (page == YT8521_RSSR_FIBER_SPACE)
2034 ret = yt8521_fiber_config_aneg(phydev);
2035 else
2036 ret = ytphy_utp_config_aneg(phydev, false);
2037
2038 err_restore_page:
2039 return phy_restore_page(phydev, old_page, ret);
2040 }
2041
2042 /**
2043 * yt8521_config_aneg() - change reg space then call yt8521_config_aneg_paged
2044 * @phydev: a pointer to a &struct phy_device
2045 *
2046 * returns 0 or negative errno code
2047 */
yt8521_config_aneg(struct phy_device * phydev)2048 static int yt8521_config_aneg(struct phy_device *phydev)
2049 {
2050 struct yt8521_priv *priv = phydev->priv;
2051 int ret;
2052
2053 if (priv->reg_page != YT8521_RSSR_TO_BE_ARBITRATED) {
2054 ret = yt8521_config_aneg_paged(phydev, priv->reg_page);
2055 if (ret < 0)
2056 return ret;
2057 } else {
2058 /* If reg_page is YT8521_RSSR_TO_BE_ARBITRATED,
2059 * phydev->advertising need to be saved at first run.
2060 * Because it contains the advertising which supported by both
2061 * mac and yt8521(utp and fiber).
2062 */
2063 if (linkmode_empty(priv->combo_advertising)) {
2064 linkmode_copy(priv->combo_advertising,
2065 phydev->advertising);
2066 }
2067
2068 ret = yt8521_config_aneg_paged(phydev, YT8521_RSSR_UTP_SPACE);
2069 if (ret < 0)
2070 return ret;
2071
2072 ret = yt8521_config_aneg_paged(phydev, YT8521_RSSR_FIBER_SPACE);
2073 if (ret < 0)
2074 return ret;
2075
2076 /* we don't known which will be link, so restore
2077 * phydev->advertising as default value.
2078 */
2079 linkmode_copy(phydev->advertising, priv->combo_advertising);
2080 }
2081 return 0;
2082 }
2083
2084 /**
2085 * yt8521_aneg_done_paged() - determines the auto negotiation result of one
2086 * page.
2087 * @phydev: a pointer to a &struct phy_device
2088 * @page: The reg page(YT8521_RSSR_FIBER_SPACE/YT8521_RSSR_UTP_SPACE) to
2089 * operate.
2090 *
2091 * returns 0(no link)or 1(fiber or utp link) or negative errno code
2092 */
yt8521_aneg_done_paged(struct phy_device * phydev,int page)2093 static int yt8521_aneg_done_paged(struct phy_device *phydev, int page)
2094 {
2095 int old_page;
2096 int ret = 0;
2097 int link;
2098
2099 old_page = phy_select_page(phydev, page & YT8521_RSSR_SPACE_MASK);
2100 if (old_page < 0)
2101 goto err_restore_page;
2102
2103 ret = __phy_read(phydev, YTPHY_SPECIFIC_STATUS_REG);
2104 if (ret < 0)
2105 goto err_restore_page;
2106
2107 link = !!(ret & YTPHY_SSR_LINK);
2108 ret = link;
2109
2110 err_restore_page:
2111 return phy_restore_page(phydev, old_page, ret);
2112 }
2113
2114 /**
2115 * yt8521_aneg_done() - determines the auto negotiation result
2116 * @phydev: a pointer to a &struct phy_device
2117 *
2118 * returns 0(no link)or 1(fiber or utp link) or negative errno code
2119 */
yt8521_aneg_done(struct phy_device * phydev)2120 static int yt8521_aneg_done(struct phy_device *phydev)
2121 {
2122 struct yt8521_priv *priv = phydev->priv;
2123 int link_fiber = 0;
2124 int link_utp;
2125 int link;
2126
2127 if (priv->reg_page != YT8521_RSSR_TO_BE_ARBITRATED) {
2128 link = yt8521_aneg_done_paged(phydev, priv->reg_page);
2129 } else {
2130 link_utp = yt8521_aneg_done_paged(phydev,
2131 YT8521_RSSR_UTP_SPACE);
2132 if (link_utp < 0)
2133 return link_utp;
2134
2135 if (!link_utp) {
2136 link_fiber = yt8521_aneg_done_paged(phydev,
2137 YT8521_RSSR_FIBER_SPACE);
2138 if (link_fiber < 0)
2139 return link_fiber;
2140 }
2141 link = link_fiber || link_utp;
2142 phydev_info(phydev, "%s, link_fiber: %d, link_utp: %d\n",
2143 __func__, link_fiber, link_utp);
2144 }
2145
2146 return link;
2147 }
2148
2149 /**
2150 * ytphy_utp_read_abilities - read PHY abilities from Clause 22 registers
2151 * @phydev: target phy_device struct
2152 *
2153 * NOTE: Reads the PHY's abilities and populates
2154 * phydev->supported accordingly.
2155 * The caller must have taken the MDIO bus lock.
2156 *
2157 * returns 0 or negative errno code
2158 */
ytphy_utp_read_abilities(struct phy_device * phydev)2159 static int ytphy_utp_read_abilities(struct phy_device *phydev)
2160 {
2161 int val;
2162
2163 linkmode_set_bit_array(phy_basic_ports_array,
2164 ARRAY_SIZE(phy_basic_ports_array),
2165 phydev->supported);
2166
2167 val = __phy_read(phydev, MII_BMSR);
2168 if (val < 0)
2169 return val;
2170
2171 linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported,
2172 val & BMSR_ANEGCAPABLE);
2173
2174 linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, phydev->supported,
2175 val & BMSR_100FULL);
2176 linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, phydev->supported,
2177 val & BMSR_100HALF);
2178 linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT, phydev->supported,
2179 val & BMSR_10FULL);
2180 linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT, phydev->supported,
2181 val & BMSR_10HALF);
2182
2183 if (val & BMSR_ESTATEN) {
2184 val = __phy_read(phydev, MII_ESTATUS);
2185 if (val < 0)
2186 return val;
2187
2188 linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
2189 phydev->supported, val & ESTATUS_1000_TFULL);
2190 linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
2191 phydev->supported, val & ESTATUS_1000_THALF);
2192 linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT,
2193 phydev->supported, val & ESTATUS_1000_XFULL);
2194 }
2195
2196 return 0;
2197 }
2198
2199 /**
2200 * yt8521_get_features_paged() - read supported link modes for one page
2201 * @phydev: a pointer to a &struct phy_device
2202 * @page: The reg page(YT8521_RSSR_FIBER_SPACE/YT8521_RSSR_UTP_SPACE) to
2203 * operate.
2204 *
2205 * returns 0 or negative errno code
2206 */
yt8521_get_features_paged(struct phy_device * phydev,int page)2207 static int yt8521_get_features_paged(struct phy_device *phydev, int page)
2208 {
2209 int old_page;
2210 int ret = 0;
2211
2212 page &= YT8521_RSSR_SPACE_MASK;
2213 old_page = phy_select_page(phydev, page);
2214 if (old_page < 0)
2215 goto err_restore_page;
2216
2217 if (page == YT8521_RSSR_FIBER_SPACE) {
2218 linkmode_zero(phydev->supported);
2219 yt8521_prepare_fiber_features(phydev, phydev->supported);
2220 } else {
2221 ret = ytphy_utp_read_abilities(phydev);
2222 if (ret < 0)
2223 goto err_restore_page;
2224 }
2225
2226 err_restore_page:
2227 return phy_restore_page(phydev, old_page, ret);
2228 }
2229
2230 /**
2231 * yt8521_get_features - switch reg space then call yt8521_get_features_paged
2232 * @phydev: target phy_device struct
2233 *
2234 * returns 0 or negative errno code
2235 */
yt8521_get_features(struct phy_device * phydev)2236 static int yt8521_get_features(struct phy_device *phydev)
2237 {
2238 struct yt8521_priv *priv = phydev->priv;
2239 int ret;
2240
2241 if (priv->reg_page != YT8521_RSSR_TO_BE_ARBITRATED) {
2242 ret = yt8521_get_features_paged(phydev, priv->reg_page);
2243 } else {
2244 ret = yt8521_get_features_paged(phydev,
2245 YT8521_RSSR_UTP_SPACE);
2246 if (ret < 0)
2247 return ret;
2248
2249 /* add fiber's features to phydev->supported */
2250 yt8521_prepare_fiber_features(phydev, phydev->supported);
2251 }
2252 return ret;
2253 }
2254
2255 static struct phy_driver motorcomm_phy_drvs[] = {
2256 {
2257 PHY_ID_MATCH_EXACT(PHY_ID_YT8511),
2258 .name = "YT8511 Gigabit Ethernet",
2259 .config_init = yt8511_config_init,
2260 .suspend = genphy_suspend,
2261 .resume = genphy_resume,
2262 .read_page = yt8511_read_page,
2263 .write_page = yt8511_write_page,
2264 },
2265 {
2266 PHY_ID_MATCH_EXACT(PHY_ID_YT8521),
2267 .name = "YT8521 Gigabit Ethernet",
2268 .get_features = yt8521_get_features,
2269 .probe = yt8521_probe,
2270 .read_page = yt8521_read_page,
2271 .write_page = yt8521_write_page,
2272 .get_wol = ytphy_get_wol,
2273 .set_wol = ytphy_set_wol,
2274 .config_aneg = yt8521_config_aneg,
2275 .aneg_done = yt8521_aneg_done,
2276 .config_init = yt8521_config_init,
2277 .read_status = yt8521_read_status,
2278 .soft_reset = yt8521_soft_reset,
2279 .suspend = yt8521_suspend,
2280 .resume = yt8521_resume,
2281 },
2282 {
2283 PHY_ID_MATCH_EXACT(PHY_ID_YT8531),
2284 .name = "YT8531 Gigabit Ethernet",
2285 .probe = yt8531_probe,
2286 .config_init = yt8531_config_init,
2287 .suspend = genphy_suspend,
2288 .resume = genphy_resume,
2289 .get_wol = ytphy_get_wol,
2290 .set_wol = yt8531_set_wol,
2291 .link_change_notify = yt8531_link_change_notify,
2292 },
2293 {
2294 PHY_ID_MATCH_EXACT(PHY_ID_YT8531S),
2295 .name = "YT8531S Gigabit Ethernet",
2296 .get_features = yt8521_get_features,
2297 .probe = yt8521_probe,
2298 .read_page = yt8521_read_page,
2299 .write_page = yt8521_write_page,
2300 .get_wol = ytphy_get_wol,
2301 .set_wol = ytphy_set_wol,
2302 .config_aneg = yt8521_config_aneg,
2303 .aneg_done = yt8521_aneg_done,
2304 .config_init = yt8521_config_init,
2305 .read_status = yt8521_read_status,
2306 .soft_reset = yt8521_soft_reset,
2307 .suspend = yt8521_suspend,
2308 .resume = yt8521_resume,
2309 },
2310 };
2311
2312 module_phy_driver(motorcomm_phy_drvs);
2313
2314 MODULE_DESCRIPTION("Motorcomm 8511/8521/8531/8531S PHY driver");
2315 MODULE_AUTHOR("Peter Geis");
2316 MODULE_AUTHOR("Frank");
2317 MODULE_LICENSE("GPL");
2318
2319 static const struct mdio_device_id __maybe_unused motorcomm_tbl[] = {
2320 { PHY_ID_MATCH_EXACT(PHY_ID_YT8511) },
2321 { PHY_ID_MATCH_EXACT(PHY_ID_YT8521) },
2322 { PHY_ID_MATCH_EXACT(PHY_ID_YT8531) },
2323 { PHY_ID_MATCH_EXACT(PHY_ID_YT8531S) },
2324 { /* sentinel */ }
2325 };
2326
2327 MODULE_DEVICE_TABLE(mdio, motorcomm_tbl);
2328