1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Amlogic Meson GXL Internal PHY Driver 4 * 5 * Copyright (C) 2015 Amlogic, Inc. All rights reserved. 6 * Copyright (C) 2016 BayLibre, SAS. All rights reserved. 7 * Author: Neil Armstrong <narmstrong@baylibre.com> 8 */ 9 #include <linux/kernel.h> 10 #include <linux/module.h> 11 #include <linux/mii.h> 12 #include <linux/ethtool.h> 13 #include <linux/phy.h> 14 #include <linux/netdevice.h> 15 #include <linux/bitfield.h> 16 17 #define TSTCNTL 20 18 #define TSTCNTL_READ BIT(15) 19 #define TSTCNTL_WRITE BIT(14) 20 #define TSTCNTL_REG_BANK_SEL GENMASK(12, 11) 21 #define TSTCNTL_TEST_MODE BIT(10) 22 #define TSTCNTL_READ_ADDRESS GENMASK(9, 5) 23 #define TSTCNTL_WRITE_ADDRESS GENMASK(4, 0) 24 #define TSTREAD1 21 25 #define TSTWRITE 23 26 #define INTSRC_FLAG 29 27 #define INTSRC_ANEG_PR BIT(1) 28 #define INTSRC_PARALLEL_FAULT BIT(2) 29 #define INTSRC_ANEG_LP_ACK BIT(3) 30 #define INTSRC_LINK_DOWN BIT(4) 31 #define INTSRC_REMOTE_FAULT BIT(5) 32 #define INTSRC_ANEG_COMPLETE BIT(6) 33 #define INTSRC_ENERGY_DETECT BIT(7) 34 #define INTSRC_MASK 30 35 36 #define INT_SOURCES (INTSRC_LINK_DOWN | INTSRC_ANEG_COMPLETE | \ 37 INTSRC_ENERGY_DETECT) 38 39 #define BANK_ANALOG_DSP 0 40 #define BANK_WOL 1 41 #define BANK_BIST 3 42 43 /* WOL Registers */ 44 #define LPI_STATUS 0xc 45 #define LPI_STATUS_RSV12 BIT(12) 46 47 /* BIST Registers */ 48 #define FR_PLL_CONTROL 0x1b 49 #define FR_PLL_DIV0 0x1c 50 #define FR_PLL_DIV1 0x1d 51 52 static int meson_gxl_open_banks(struct phy_device *phydev) 53 { 54 int ret; 55 56 /* Enable Analog and DSP register Bank access by 57 * toggling TSTCNTL_TEST_MODE bit in the TSTCNTL register 58 */ 59 ret = phy_write(phydev, TSTCNTL, 0); 60 if (ret) 61 return ret; 62 ret = phy_write(phydev, TSTCNTL, TSTCNTL_TEST_MODE); 63 if (ret) 64 return ret; 65 ret = phy_write(phydev, TSTCNTL, 0); 66 if (ret) 67 return ret; 68 return phy_write(phydev, TSTCNTL, TSTCNTL_TEST_MODE); 69 } 70 71 static void meson_gxl_close_banks(struct phy_device *phydev) 72 { 73 phy_write(phydev, TSTCNTL, 0); 74 } 75 76 static int meson_gxl_read_reg(struct phy_device *phydev, 77 unsigned int bank, unsigned int reg) 78 { 79 int ret; 80 81 ret = meson_gxl_open_banks(phydev); 82 if (ret) 83 goto out; 84 85 ret = phy_write(phydev, TSTCNTL, TSTCNTL_READ | 86 FIELD_PREP(TSTCNTL_REG_BANK_SEL, bank) | 87 TSTCNTL_TEST_MODE | 88 FIELD_PREP(TSTCNTL_READ_ADDRESS, reg)); 89 if (ret) 90 goto out; 91 92 ret = phy_read(phydev, TSTREAD1); 93 out: 94 /* Close the bank access on our way out */ 95 meson_gxl_close_banks(phydev); 96 return ret; 97 } 98 99 static int meson_gxl_write_reg(struct phy_device *phydev, 100 unsigned int bank, unsigned int reg, 101 uint16_t value) 102 { 103 int ret; 104 105 ret = meson_gxl_open_banks(phydev); 106 if (ret) 107 goto out; 108 109 ret = phy_write(phydev, TSTWRITE, value); 110 if (ret) 111 goto out; 112 113 ret = phy_write(phydev, TSTCNTL, TSTCNTL_WRITE | 114 FIELD_PREP(TSTCNTL_REG_BANK_SEL, bank) | 115 TSTCNTL_TEST_MODE | 116 FIELD_PREP(TSTCNTL_WRITE_ADDRESS, reg)); 117 118 out: 119 /* Close the bank access on our way out */ 120 meson_gxl_close_banks(phydev); 121 return ret; 122 } 123 124 static int meson_gxl_config_init(struct phy_device *phydev) 125 { 126 int ret; 127 128 /* Enable fractional PLL */ 129 ret = meson_gxl_write_reg(phydev, BANK_BIST, FR_PLL_CONTROL, 0x5); 130 if (ret) 131 return ret; 132 133 /* Program fraction FR_PLL_DIV1 */ 134 ret = meson_gxl_write_reg(phydev, BANK_BIST, FR_PLL_DIV1, 0x029a); 135 if (ret) 136 return ret; 137 138 /* Program fraction FR_PLL_DIV1 */ 139 ret = meson_gxl_write_reg(phydev, BANK_BIST, FR_PLL_DIV0, 0xaaaa); 140 if (ret) 141 return ret; 142 143 return 0; 144 } 145 146 /* This function is provided to cope with the possible failures of this phy 147 * during aneg process. When aneg fails, the PHY reports that aneg is done 148 * but the value found in MII_LPA is wrong: 149 * - Early failures: MII_LPA is just 0x0001. if MII_EXPANSION reports that 150 * the link partner (LP) supports aneg but the LP never acked our base 151 * code word, it is likely that we never sent it to begin with. 152 * - Late failures: MII_LPA is filled with a value which seems to make sense 153 * but it actually is not what the LP is advertising. It seems that we 154 * can detect this using a magic bit in the WOL bank (reg 12 - bit 12). 155 * If this particular bit is not set when aneg is reported being done, 156 * it means MII_LPA is likely to be wrong. 157 * 158 * In both case, forcing a restart of the aneg process solve the problem. 159 * When this failure happens, the first retry is usually successful but, 160 * in some cases, it may take up to 6 retries to get a decent result 161 */ 162 static int meson_gxl_read_status(struct phy_device *phydev) 163 { 164 int ret, wol, lpa, exp; 165 166 if (phydev->autoneg == AUTONEG_ENABLE) { 167 ret = genphy_aneg_done(phydev); 168 if (ret < 0) 169 return ret; 170 else if (!ret) 171 goto read_status_continue; 172 173 /* Aneg is done, let's check everything is fine */ 174 wol = meson_gxl_read_reg(phydev, BANK_WOL, LPI_STATUS); 175 if (wol < 0) 176 return wol; 177 178 lpa = phy_read(phydev, MII_LPA); 179 if (lpa < 0) 180 return lpa; 181 182 exp = phy_read(phydev, MII_EXPANSION); 183 if (exp < 0) 184 return exp; 185 186 if (!(wol & LPI_STATUS_RSV12) || 187 ((exp & EXPANSION_NWAY) && !(lpa & LPA_LPACK))) { 188 /* Looks like aneg failed after all */ 189 phydev_dbg(phydev, "LPA corruption - aneg restart\n"); 190 return genphy_restart_aneg(phydev); 191 } 192 } 193 194 read_status_continue: 195 return genphy_read_status(phydev); 196 } 197 198 static int meson_gxl_ack_interrupt(struct phy_device *phydev) 199 { 200 int ret = phy_read(phydev, INTSRC_FLAG); 201 202 return ret < 0 ? ret : 0; 203 } 204 205 static int meson_gxl_config_intr(struct phy_device *phydev) 206 { 207 int ret; 208 209 if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { 210 /* Ack any pending IRQ */ 211 ret = meson_gxl_ack_interrupt(phydev); 212 if (ret) 213 return ret; 214 215 ret = phy_write(phydev, INTSRC_MASK, INT_SOURCES); 216 } else { 217 ret = phy_write(phydev, INTSRC_MASK, 0); 218 219 /* Ack any pending IRQ */ 220 ret = meson_gxl_ack_interrupt(phydev); 221 } 222 223 return ret; 224 } 225 226 static irqreturn_t meson_gxl_handle_interrupt(struct phy_device *phydev) 227 { 228 int irq_status; 229 230 irq_status = phy_read(phydev, INTSRC_FLAG); 231 if (irq_status < 0) { 232 phy_error(phydev); 233 return IRQ_NONE; 234 } 235 236 irq_status &= INT_SOURCES; 237 238 if (irq_status == 0) 239 return IRQ_NONE; 240 241 /* Aneg-complete interrupt is used for link-up detection */ 242 if (phydev->autoneg == AUTONEG_ENABLE && 243 irq_status == INTSRC_ENERGY_DETECT) 244 return IRQ_HANDLED; 245 246 /* Give PHY some time before MAC starts sending data. This works 247 * around an issue where network doesn't come up properly. 248 */ 249 if (!(irq_status & INTSRC_LINK_DOWN)) 250 phy_queue_state_machine(phydev, msecs_to_jiffies(100)); 251 else 252 phy_trigger_machine(phydev); 253 254 return IRQ_HANDLED; 255 } 256 257 static struct phy_driver meson_gxl_phy[] = { 258 { 259 PHY_ID_MATCH_EXACT(0x01814400), 260 .name = "Meson GXL Internal PHY", 261 /* PHY_BASIC_FEATURES */ 262 .flags = PHY_IS_INTERNAL, 263 .soft_reset = genphy_soft_reset, 264 .config_init = meson_gxl_config_init, 265 .read_status = meson_gxl_read_status, 266 .config_intr = meson_gxl_config_intr, 267 .handle_interrupt = meson_gxl_handle_interrupt, 268 .suspend = genphy_suspend, 269 .resume = genphy_resume, 270 }, { 271 PHY_ID_MATCH_EXACT(0x01803301), 272 .name = "Meson G12A Internal PHY", 273 /* PHY_BASIC_FEATURES */ 274 .flags = PHY_IS_INTERNAL, 275 .soft_reset = genphy_soft_reset, 276 .config_intr = meson_gxl_config_intr, 277 .handle_interrupt = meson_gxl_handle_interrupt, 278 .suspend = genphy_suspend, 279 .resume = genphy_resume, 280 }, 281 }; 282 283 static struct mdio_device_id __maybe_unused meson_gxl_tbl[] = { 284 { PHY_ID_MATCH_VENDOR(0x01814400) }, 285 { PHY_ID_MATCH_VENDOR(0x01803301) }, 286 { } 287 }; 288 289 module_phy_driver(meson_gxl_phy); 290 291 MODULE_DEVICE_TABLE(mdio, meson_gxl_tbl); 292 293 MODULE_DESCRIPTION("Amlogic Meson GXL Internal PHY driver"); 294 MODULE_AUTHOR("Baoqi wang"); 295 MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>"); 296 MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>"); 297 MODULE_LICENSE("GPL"); 298