xref: /openbmc/linux/drivers/net/phy/dp83867.c (revision 6d99a79c)
1 /*
2  * Driver for the Texas Instruments DP83867 PHY
3  *
4  * Copyright (C) 2015 Texas Instruments Inc.
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License as published by
8  * the Free Software Foundation; either version 2 of the License.
9  *
10  * This program is distributed in the hope that it will be useful,
11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
13  * GNU General Public License for more details.
14  */
15 
16 #include <linux/ethtool.h>
17 #include <linux/kernel.h>
18 #include <linux/mii.h>
19 #include <linux/module.h>
20 #include <linux/of.h>
21 #include <linux/phy.h>
22 
23 #include <dt-bindings/net/ti-dp83867.h>
24 
25 #define DP83867_PHY_ID		0x2000a231
26 #define DP83867_DEVADDR		0x1f
27 
28 #define MII_DP83867_PHYCTRL	0x10
29 #define MII_DP83867_MICR	0x12
30 #define MII_DP83867_ISR		0x13
31 #define DP83867_CTRL		0x1f
32 #define DP83867_CFG3		0x1e
33 
34 /* Extended Registers */
35 #define DP83867_CFG4            0x0031
36 #define DP83867_RGMIICTL	0x0032
37 #define DP83867_STRAP_STS1	0x006E
38 #define DP83867_RGMIIDCTL	0x0086
39 #define DP83867_IO_MUX_CFG	0x0170
40 
41 #define DP83867_SW_RESET	BIT(15)
42 #define DP83867_SW_RESTART	BIT(14)
43 
44 /* MICR Interrupt bits */
45 #define MII_DP83867_MICR_AN_ERR_INT_EN		BIT(15)
46 #define MII_DP83867_MICR_SPEED_CHNG_INT_EN	BIT(14)
47 #define MII_DP83867_MICR_DUP_MODE_CHNG_INT_EN	BIT(13)
48 #define MII_DP83867_MICR_PAGE_RXD_INT_EN	BIT(12)
49 #define MII_DP83867_MICR_AUTONEG_COMP_INT_EN	BIT(11)
50 #define MII_DP83867_MICR_LINK_STS_CHNG_INT_EN	BIT(10)
51 #define MII_DP83867_MICR_FALSE_CARRIER_INT_EN	BIT(8)
52 #define MII_DP83867_MICR_SLEEP_MODE_CHNG_INT_EN	BIT(4)
53 #define MII_DP83867_MICR_WOL_INT_EN		BIT(3)
54 #define MII_DP83867_MICR_XGMII_ERR_INT_EN	BIT(2)
55 #define MII_DP83867_MICR_POL_CHNG_INT_EN	BIT(1)
56 #define MII_DP83867_MICR_JABBER_INT_EN		BIT(0)
57 
58 /* RGMIICTL bits */
59 #define DP83867_RGMII_TX_CLK_DELAY_EN		BIT(1)
60 #define DP83867_RGMII_RX_CLK_DELAY_EN		BIT(0)
61 
62 /* STRAP_STS1 bits */
63 #define DP83867_STRAP_STS1_RESERVED		BIT(11)
64 
65 /* PHY CTRL bits */
66 #define DP83867_PHYCR_FIFO_DEPTH_SHIFT		14
67 #define DP83867_PHYCR_FIFO_DEPTH_MASK		(3 << 14)
68 #define DP83867_PHYCR_RESERVED_MASK		BIT(11)
69 
70 /* RGMIIDCTL bits */
71 #define DP83867_RGMII_TX_CLK_DELAY_SHIFT	4
72 
73 /* IO_MUX_CFG bits */
74 #define DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL	0x1f
75 
76 #define DP83867_IO_MUX_CFG_IO_IMPEDANCE_MAX	0x0
77 #define DP83867_IO_MUX_CFG_IO_IMPEDANCE_MIN	0x1f
78 #define DP83867_IO_MUX_CFG_CLK_O_SEL_MASK	(0x1f << 8)
79 #define DP83867_IO_MUX_CFG_CLK_O_SEL_SHIFT	8
80 
81 /* CFG4 bits */
82 #define DP83867_CFG4_PORT_MIRROR_EN              BIT(0)
83 
84 enum {
85 	DP83867_PORT_MIRROING_KEEP,
86 	DP83867_PORT_MIRROING_EN,
87 	DP83867_PORT_MIRROING_DIS,
88 };
89 
90 struct dp83867_private {
91 	int rx_id_delay;
92 	int tx_id_delay;
93 	int fifo_depth;
94 	int io_impedance;
95 	int port_mirroring;
96 	bool rxctrl_strap_quirk;
97 	int clk_output_sel;
98 };
99 
100 static int dp83867_ack_interrupt(struct phy_device *phydev)
101 {
102 	int err = phy_read(phydev, MII_DP83867_ISR);
103 
104 	if (err < 0)
105 		return err;
106 
107 	return 0;
108 }
109 
110 static int dp83867_config_intr(struct phy_device *phydev)
111 {
112 	int micr_status;
113 
114 	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
115 		micr_status = phy_read(phydev, MII_DP83867_MICR);
116 		if (micr_status < 0)
117 			return micr_status;
118 
119 		micr_status |=
120 			(MII_DP83867_MICR_AN_ERR_INT_EN |
121 			MII_DP83867_MICR_SPEED_CHNG_INT_EN |
122 			MII_DP83867_MICR_AUTONEG_COMP_INT_EN |
123 			MII_DP83867_MICR_LINK_STS_CHNG_INT_EN |
124 			MII_DP83867_MICR_DUP_MODE_CHNG_INT_EN |
125 			MII_DP83867_MICR_SLEEP_MODE_CHNG_INT_EN);
126 
127 		return phy_write(phydev, MII_DP83867_MICR, micr_status);
128 	}
129 
130 	micr_status = 0x0;
131 	return phy_write(phydev, MII_DP83867_MICR, micr_status);
132 }
133 
134 static int dp83867_config_port_mirroring(struct phy_device *phydev)
135 {
136 	struct dp83867_private *dp83867 =
137 		(struct dp83867_private *)phydev->priv;
138 	u16 val;
139 
140 	val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4);
141 
142 	if (dp83867->port_mirroring == DP83867_PORT_MIRROING_EN)
143 		val |= DP83867_CFG4_PORT_MIRROR_EN;
144 	else
145 		val &= ~DP83867_CFG4_PORT_MIRROR_EN;
146 
147 	phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4, val);
148 
149 	return 0;
150 }
151 
152 #ifdef CONFIG_OF_MDIO
153 static int dp83867_of_init(struct phy_device *phydev)
154 {
155 	struct dp83867_private *dp83867 = phydev->priv;
156 	struct device *dev = &phydev->mdio.dev;
157 	struct device_node *of_node = dev->of_node;
158 	int ret;
159 
160 	if (!of_node)
161 		return -ENODEV;
162 
163 	dp83867->io_impedance = -EINVAL;
164 
165 	/* Optional configuration */
166 	ret = of_property_read_u32(of_node, "ti,clk-output-sel",
167 				   &dp83867->clk_output_sel);
168 	if (ret || dp83867->clk_output_sel > DP83867_CLK_O_SEL_REF_CLK)
169 		/* Keep the default value if ti,clk-output-sel is not set
170 		 * or too high
171 		 */
172 		dp83867->clk_output_sel = DP83867_CLK_O_SEL_REF_CLK;
173 
174 	if (of_property_read_bool(of_node, "ti,max-output-impedance"))
175 		dp83867->io_impedance = DP83867_IO_MUX_CFG_IO_IMPEDANCE_MAX;
176 	else if (of_property_read_bool(of_node, "ti,min-output-impedance"))
177 		dp83867->io_impedance = DP83867_IO_MUX_CFG_IO_IMPEDANCE_MIN;
178 
179 	dp83867->rxctrl_strap_quirk = of_property_read_bool(of_node,
180 					"ti,dp83867-rxctrl-strap-quirk");
181 
182 	ret = of_property_read_u32(of_node, "ti,rx-internal-delay",
183 				   &dp83867->rx_id_delay);
184 	if (ret &&
185 	    (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
186 	     phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID))
187 		return ret;
188 
189 	ret = of_property_read_u32(of_node, "ti,tx-internal-delay",
190 				   &dp83867->tx_id_delay);
191 	if (ret &&
192 	    (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
193 	     phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID))
194 		return ret;
195 
196 	if (of_property_read_bool(of_node, "enet-phy-lane-swap"))
197 		dp83867->port_mirroring = DP83867_PORT_MIRROING_EN;
198 
199 	if (of_property_read_bool(of_node, "enet-phy-lane-no-swap"))
200 		dp83867->port_mirroring = DP83867_PORT_MIRROING_DIS;
201 
202 	return of_property_read_u32(of_node, "ti,fifo-depth",
203 				   &dp83867->fifo_depth);
204 }
205 #else
206 static int dp83867_of_init(struct phy_device *phydev)
207 {
208 	return 0;
209 }
210 #endif /* CONFIG_OF_MDIO */
211 
212 static int dp83867_config_init(struct phy_device *phydev)
213 {
214 	struct dp83867_private *dp83867;
215 	int ret, val, bs;
216 	u16 delay;
217 
218 	if (!phydev->priv) {
219 		dp83867 = devm_kzalloc(&phydev->mdio.dev, sizeof(*dp83867),
220 				       GFP_KERNEL);
221 		if (!dp83867)
222 			return -ENOMEM;
223 
224 		phydev->priv = dp83867;
225 		ret = dp83867_of_init(phydev);
226 		if (ret)
227 			return ret;
228 	} else {
229 		dp83867 = (struct dp83867_private *)phydev->priv;
230 	}
231 
232 	/* RX_DV/RX_CTRL strapped in mode 1 or mode 2 workaround */
233 	if (dp83867->rxctrl_strap_quirk) {
234 		val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4);
235 		val &= ~BIT(7);
236 		phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4, val);
237 	}
238 
239 	if (phy_interface_is_rgmii(phydev)) {
240 		val = phy_read(phydev, MII_DP83867_PHYCTRL);
241 		if (val < 0)
242 			return val;
243 		val &= ~DP83867_PHYCR_FIFO_DEPTH_MASK;
244 		val |= (dp83867->fifo_depth << DP83867_PHYCR_FIFO_DEPTH_SHIFT);
245 
246 		/* The code below checks if "port mirroring" N/A MODE4 has been
247 		 * enabled during power on bootstrap.
248 		 *
249 		 * Such N/A mode enabled by mistake can put PHY IC in some
250 		 * internal testing mode and disable RGMII transmission.
251 		 *
252 		 * In this particular case one needs to check STRAP_STS1
253 		 * register's bit 11 (marked as RESERVED).
254 		 */
255 
256 		bs = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_STRAP_STS1);
257 		if (bs & DP83867_STRAP_STS1_RESERVED)
258 			val &= ~DP83867_PHYCR_RESERVED_MASK;
259 
260 		ret = phy_write(phydev, MII_DP83867_PHYCTRL, val);
261 		if (ret)
262 			return ret;
263 	}
264 
265 	if ((phydev->interface >= PHY_INTERFACE_MODE_RGMII_ID) &&
266 	    (phydev->interface <= PHY_INTERFACE_MODE_RGMII_RXID)) {
267 		val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_RGMIICTL);
268 
269 		if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
270 			val |= (DP83867_RGMII_TX_CLK_DELAY_EN | DP83867_RGMII_RX_CLK_DELAY_EN);
271 
272 		if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
273 			val |= DP83867_RGMII_TX_CLK_DELAY_EN;
274 
275 		if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
276 			val |= DP83867_RGMII_RX_CLK_DELAY_EN;
277 
278 		phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_RGMIICTL, val);
279 
280 		delay = (dp83867->rx_id_delay |
281 			(dp83867->tx_id_delay << DP83867_RGMII_TX_CLK_DELAY_SHIFT));
282 
283 		phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_RGMIIDCTL,
284 			      delay);
285 
286 		if (dp83867->io_impedance >= 0) {
287 			val = phy_read_mmd(phydev, DP83867_DEVADDR,
288 					   DP83867_IO_MUX_CFG);
289 
290 			val &= ~DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL;
291 			val |= dp83867->io_impedance &
292 			       DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL;
293 
294 			phy_write_mmd(phydev, DP83867_DEVADDR,
295 				      DP83867_IO_MUX_CFG, val);
296 		}
297 	}
298 
299 	/* Enable Interrupt output INT_OE in CFG3 register */
300 	if (phy_interrupt_is_valid(phydev)) {
301 		val = phy_read(phydev, DP83867_CFG3);
302 		val |= BIT(7);
303 		phy_write(phydev, DP83867_CFG3, val);
304 	}
305 
306 	if (dp83867->port_mirroring != DP83867_PORT_MIRROING_KEEP)
307 		dp83867_config_port_mirroring(phydev);
308 
309 	/* Clock output selection if muxing property is set */
310 	if (dp83867->clk_output_sel != DP83867_CLK_O_SEL_REF_CLK) {
311 		val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_IO_MUX_CFG);
312 		val &= ~DP83867_IO_MUX_CFG_CLK_O_SEL_MASK;
313 		val |= (dp83867->clk_output_sel << DP83867_IO_MUX_CFG_CLK_O_SEL_SHIFT);
314 		phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_IO_MUX_CFG, val);
315 	}
316 
317 	return 0;
318 }
319 
320 static int dp83867_phy_reset(struct phy_device *phydev)
321 {
322 	int err;
323 
324 	err = phy_write(phydev, DP83867_CTRL, DP83867_SW_RESET);
325 	if (err < 0)
326 		return err;
327 
328 	return dp83867_config_init(phydev);
329 }
330 
331 static struct phy_driver dp83867_driver[] = {
332 	{
333 		.phy_id		= DP83867_PHY_ID,
334 		.phy_id_mask	= 0xfffffff0,
335 		.name		= "TI DP83867",
336 		.features	= PHY_GBIT_FEATURES,
337 		.flags		= PHY_HAS_INTERRUPT,
338 
339 		.config_init	= dp83867_config_init,
340 		.soft_reset	= dp83867_phy_reset,
341 
342 		/* IRQ related */
343 		.ack_interrupt	= dp83867_ack_interrupt,
344 		.config_intr	= dp83867_config_intr,
345 
346 		.suspend	= genphy_suspend,
347 		.resume		= genphy_resume,
348 	},
349 };
350 module_phy_driver(dp83867_driver);
351 
352 static struct mdio_device_id __maybe_unused dp83867_tbl[] = {
353 	{ DP83867_PHY_ID, 0xfffffff0 },
354 	{ }
355 };
356 
357 MODULE_DEVICE_TABLE(mdio, dp83867_tbl);
358 
359 MODULE_DESCRIPTION("Texas Instruments DP83867 PHY driver");
360 MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com");
361 MODULE_LICENSE("GPL");
362