1 // SPDX-License-Identifier: GPL-2.0
2 /* Copyright (c) 2019 - 2022 Beijing WangXun Technology Co., Ltd. */
3
4 #include <linux/etherdevice.h>
5 #include <linux/iopoll.h>
6 #include <linux/pci.h>
7
8 #include "../libwx/wx_type.h"
9 #include "../libwx/wx_hw.h"
10 #include "ngbe_type.h"
11 #include "ngbe_hw.h"
12
ngbe_eeprom_chksum_hostif(struct wx * wx)13 int ngbe_eeprom_chksum_hostif(struct wx *wx)
14 {
15 struct wx_hic_read_shadow_ram buffer;
16 int status;
17 int tmp;
18
19 buffer.hdr.req.cmd = NGBE_FW_EEPROM_CHECKSUM_CMD;
20 buffer.hdr.req.buf_lenh = 0;
21 buffer.hdr.req.buf_lenl = 0;
22 buffer.hdr.req.checksum = NGBE_FW_CMD_DEFAULT_CHECKSUM;
23 /* convert offset from words to bytes */
24 buffer.address = 0;
25 /* one word */
26 buffer.length = 0;
27
28 status = wx_host_interface_command(wx, (u32 *)&buffer, sizeof(buffer),
29 WX_HI_COMMAND_TIMEOUT, false);
30
31 if (status < 0)
32 return status;
33 tmp = rd32a(wx, WX_MNG_MBOX, 1);
34 if (tmp == NGBE_FW_CMD_ST_PASS)
35 return 0;
36 return -EIO;
37 }
38
ngbe_reset_misc(struct wx * wx)39 static int ngbe_reset_misc(struct wx *wx)
40 {
41 wx_reset_misc(wx);
42 if (wx->gpio_ctrl) {
43 /* gpio0 is used to power on/off control*/
44 wr32(wx, NGBE_GPIO_DDR, 0x1);
45 ngbe_sfp_modules_txrx_powerctl(wx, false);
46 }
47 return 0;
48 }
49
ngbe_sfp_modules_txrx_powerctl(struct wx * wx,bool swi)50 void ngbe_sfp_modules_txrx_powerctl(struct wx *wx, bool swi)
51 {
52 /* gpio0 is used to power on control . 0 is on */
53 wr32(wx, NGBE_GPIO_DR, swi ? 0 : NGBE_GPIO_DR_0);
54 }
55
56 /**
57 * ngbe_reset_hw - Perform hardware reset
58 * @wx: pointer to hardware structure
59 *
60 * Resets the hardware by resetting the transmit and receive units, masks
61 * and clears all interrupts, perform a PHY reset, and perform a link (MAC)
62 * reset.
63 **/
ngbe_reset_hw(struct wx * wx)64 int ngbe_reset_hw(struct wx *wx)
65 {
66 u32 val = 0;
67 int ret = 0;
68
69 /* Call wx stop to disable tx/rx and clear interrupts */
70 ret = wx_stop_adapter(wx);
71 if (ret != 0)
72 return ret;
73
74 if (wx->mac_type != em_mac_type_mdi) {
75 val = WX_MIS_RST_LAN_RST(wx->bus.func);
76 wr32(wx, WX_MIS_RST, val | rd32(wx, WX_MIS_RST));
77
78 ret = read_poll_timeout(rd32, val,
79 !(val & (BIT(9) << wx->bus.func)), 1000,
80 100000, false, wx, 0x10028);
81 if (ret) {
82 wx_err(wx, "Lan reset exceed s maximum times.\n");
83 return ret;
84 }
85 }
86 ngbe_reset_misc(wx);
87
88 /* Store the permanent mac address */
89 wx_get_mac_addr(wx, wx->mac.perm_addr);
90
91 /* reset num_rar_entries to 128 */
92 wx->mac.num_rar_entries = NGBE_RAR_ENTRIES;
93 wx_init_rx_addrs(wx);
94 pci_set_master(wx->pdev);
95
96 return 0;
97 }
98