1# SPDX-License-Identifier: GPL-2.0-only
2#
3# QLogic network device configuration
4#
5
6config NET_VENDOR_QLOGIC
7	bool "QLogic devices"
8	default y
9	depends on PCI
10	---help---
11	  If you have a network (Ethernet) card belonging to this class, say Y.
12
13	  Note that the answer to this question doesn't directly affect the
14	  kernel: saying N will just cause the configurator to skip all
15	  the questions about QLogic cards. If you say Y, you will be asked for
16	  your specific card in the following questions.
17
18if NET_VENDOR_QLOGIC
19
20config QLA3XXX
21	tristate "QLogic QLA3XXX Network Driver Support"
22	depends on PCI
23	---help---
24	  This driver supports QLogic ISP3XXX gigabit Ethernet cards.
25
26	  To compile this driver as a module, choose M here: the module
27	  will be called qla3xxx.
28
29config QLCNIC
30	tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support"
31	depends on PCI
32	select FW_LOADER
33	---help---
34	  This driver supports QLogic QLE8240 and QLE8242 Converged Ethernet
35	  devices.
36
37config QLCNIC_SRIOV
38	bool "QLOGIC QLCNIC 83XX family SR-IOV Support"
39	depends on QLCNIC && PCI_IOV
40	default y
41	---help---
42	  This configuration parameter enables Single Root Input Output
43	  Virtualization support for QLE83XX Converged Ethernet devices.
44	  This allows for virtual function acceleration in virtualized
45	  environments.
46
47config QLCNIC_DCB
48	bool "QLOGIC QLCNIC 82XX and 83XX family DCB Support"
49	depends on QLCNIC && DCB
50	default y
51	---help---
52	  This configuration parameter enables DCB support in QLE83XX
53	  and QLE82XX Converged Ethernet devices. This allows for DCB
54	  get operations support through rtNetlink interface. Only CEE
55	  mode of DCB is supported. PG and PFC values are related only
56	  to Tx.
57
58config QLCNIC_HWMON
59	bool "QLOGIC QLCNIC 82XX and 83XX family HWMON support"
60	depends on QLCNIC && HWMON && !(QLCNIC=y && HWMON=m)
61	default y
62	---help---
63	  This configuration parameter can be used to read the
64	  board temperature in Converged Ethernet devices
65	  supported by qlcnic.
66
67	  This data is available via the hwmon sysfs interface.
68
69config QLGE
70	tristate "QLogic QLGE 10Gb Ethernet Driver Support"
71	depends on PCI
72	---help---
73	  This driver supports QLogic ISP8XXX 10Gb Ethernet cards.
74
75	  To compile this driver as a module, choose M here: the module
76	  will be called qlge.
77
78config NETXEN_NIC
79	tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
80	depends on PCI
81	select FW_LOADER
82	---help---
83	  This enables the support for NetXen's Gigabit Ethernet card.
84
85config QED
86	tristate "QLogic QED 25/40/100Gb core driver"
87	depends on PCI
88	select ZLIB_INFLATE
89	select CRC8
90	---help---
91	  This enables the support for ...
92
93config QED_LL2
94	bool
95
96config QED_SRIOV
97	bool "QLogic QED 25/40/100Gb SR-IOV support"
98	depends on QED && PCI_IOV
99	default y
100	---help---
101	  This configuration parameter enables Single Root Input Output
102	  Virtualization support for QED devices.
103	  This allows for virtual function acceleration in virtualized
104	  environments.
105
106config QEDE
107	tristate "QLogic QED 25/40/100Gb Ethernet NIC"
108	depends on QED
109	imply PTP_1588_CLOCK
110	---help---
111	  This enables the support for ...
112
113config QED_RDMA
114	bool
115
116config QED_ISCSI
117	bool
118
119config QED_FCOE
120	bool
121
122config QED_OOO
123	bool
124
125endif # NET_VENDOR_QLOGIC
126