xref: /openbmc/linux/drivers/net/ethernet/qlogic/Kconfig (revision 762f99f4f3cb41a775b5157dd761217beba65873)
1 # SPDX-License-Identifier: GPL-2.0-only
2 #
3 # QLogic network device configuration
4 #
5 
6 config NET_VENDOR_QLOGIC
7 	bool "QLogic devices"
8 	default y
9 	depends on PCI
10 	help
11 	  If you have a network (Ethernet) card belonging to this class, say Y.
12 
13 	  Note that the answer to this question doesn't directly affect the
14 	  kernel: saying N will just cause the configurator to skip all
15 	  the questions about QLogic cards. If you say Y, you will be asked for
16 	  your specific card in the following questions.
17 
18 if NET_VENDOR_QLOGIC
19 
20 config QLA3XXX
21 	tristate "QLogic QLA3XXX Network Driver Support"
22 	depends on PCI
23 	help
24 	  This driver supports QLogic ISP3XXX gigabit Ethernet cards.
25 
26 	  To compile this driver as a module, choose M here: the module
27 	  will be called qla3xxx.
28 
29 config QLCNIC
30 	tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support"
31 	depends on PCI
32 	select FW_LOADER
33 	help
34 	  This driver supports QLogic QLE8240 and QLE8242 Converged Ethernet
35 	  devices.
36 
37 config QLCNIC_SRIOV
38 	bool "QLOGIC QLCNIC 83XX family SR-IOV Support"
39 	depends on QLCNIC && PCI_IOV
40 	default y
41 	help
42 	  This configuration parameter enables Single Root Input Output
43 	  Virtualization support for QLE83XX Converged Ethernet devices.
44 	  This allows for virtual function acceleration in virtualized
45 	  environments.
46 
47 config QLCNIC_DCB
48 	bool "QLOGIC QLCNIC 82XX and 83XX family DCB Support"
49 	depends on QLCNIC && DCB
50 	default y
51 	help
52 	  This configuration parameter enables DCB support in QLE83XX
53 	  and QLE82XX Converged Ethernet devices. This allows for DCB
54 	  get operations support through rtNetlink interface. Only CEE
55 	  mode of DCB is supported. PG and PFC values are related only
56 	  to Tx.
57 
58 config QLCNIC_HWMON
59 	bool "QLOGIC QLCNIC 82XX and 83XX family HWMON support"
60 	depends on QLCNIC && HWMON && !(QLCNIC=y && HWMON=m)
61 	default y
62 	help
63 	  This configuration parameter can be used to read the
64 	  board temperature in Converged Ethernet devices
65 	  supported by qlcnic.
66 
67 	  This data is available via the hwmon sysfs interface.
68 
69 config NETXEN_NIC
70 	tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
71 	depends on PCI
72 	select FW_LOADER
73 	help
74 	  This enables the support for NetXen's Gigabit Ethernet card.
75 
76 config QED
77 	tristate "QLogic QED 25/40/100Gb core driver"
78 	depends on PCI
79 	select ZLIB_INFLATE
80 	select CRC8
81 	select CRC32
82 	select NET_DEVLINK
83 	help
84 	  This enables the support for Marvell FastLinQ adapters family.
85 
86 config QED_LL2
87 	bool
88 
89 config QED_SRIOV
90 	bool "QLogic QED 25/40/100Gb SR-IOV support"
91 	depends on QED && PCI_IOV
92 	default y
93 	help
94 	  This configuration parameter enables Single Root Input Output
95 	  Virtualization support for QED devices.
96 	  This allows for virtual function acceleration in virtualized
97 	  environments.
98 
99 config QEDE
100 	tristate "QLogic QED 25/40/100Gb Ethernet NIC"
101 	depends on QED
102 	depends on PTP_1588_CLOCK_OPTIONAL
103 	help
104 	  This enables the support for Marvell FastLinQ adapters family,
105 	  ethernet driver.
106 
107 config QED_RDMA
108 	bool
109 
110 config QED_ISCSI
111 	bool
112 
113 config QED_NVMETCP
114 	bool
115 
116 config QED_FCOE
117 	bool
118 
119 config QED_OOO
120 	bool
121 
122 endif # NET_VENDOR_QLOGIC
123