1#
2# QLogic network device configuration
3#
4
5config NET_VENDOR_QLOGIC
6	bool "QLogic devices"
7	default y
8	depends on PCI
9	---help---
10	  If you have a network (Ethernet) card belonging to this class, say Y.
11
12	  Note that the answer to this question doesn't directly affect the
13	  kernel: saying N will just cause the configurator to skip all
14	  the questions about QLogic cards. If you say Y, you will be asked for
15	  your specific card in the following questions.
16
17if NET_VENDOR_QLOGIC
18
19config QLA3XXX
20	tristate "QLogic QLA3XXX Network Driver Support"
21	depends on PCI
22	---help---
23	  This driver supports QLogic ISP3XXX gigabit Ethernet cards.
24
25	  To compile this driver as a module, choose M here: the module
26	  will be called qla3xxx.
27
28config QLCNIC
29	tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support"
30	depends on PCI
31	select FW_LOADER
32	---help---
33	  This driver supports QLogic QLE8240 and QLE8242 Converged Ethernet
34	  devices.
35
36config QLCNIC_SRIOV
37	bool "QLOGIC QLCNIC 83XX family SR-IOV Support"
38	depends on QLCNIC && PCI_IOV
39	default y
40	---help---
41	  This configuration parameter enables Single Root Input Output
42	  Virtualization support for QLE83XX Converged Ethernet devices.
43	  This allows for virtual function acceleration in virtualized
44	  environments.
45
46config QLCNIC_DCB
47	bool "QLOGIC QLCNIC 82XX and 83XX family DCB Support"
48	depends on QLCNIC && DCB
49	default y
50	---help---
51	  This configuration parameter enables DCB support in QLE83XX
52	  and QLE82XX Converged Ethernet devices. This allows for DCB
53	  get operations support through rtNetlink interface. Only CEE
54	  mode of DCB is supported. PG and PFC values are related only
55	  to Tx.
56
57config QLCNIC_HWMON
58	bool "QLOGIC QLCNIC 82XX and 83XX family HWMON support"
59	depends on QLCNIC && HWMON && !(QLCNIC=y && HWMON=m)
60	default y
61	---help---
62	  This configuration parameter can be used to read the
63	  board temperature in Converged Ethernet devices
64	  supported by qlcnic.
65
66	  This data is available via the hwmon sysfs interface.
67
68config QLGE
69	tristate "QLogic QLGE 10Gb Ethernet Driver Support"
70	depends on PCI
71	---help---
72	  This driver supports QLogic ISP8XXX 10Gb Ethernet cards.
73
74	  To compile this driver as a module, choose M here: the module
75	  will be called qlge.
76
77config NETXEN_NIC
78	tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
79	depends on PCI
80	select FW_LOADER
81	---help---
82	  This enables the support for NetXen's Gigabit Ethernet card.
83
84config QED
85	tristate "QLogic QED 25/40/100Gb core driver"
86	depends on PCI
87	select ZLIB_INFLATE
88	---help---
89	  This enables the support for ...
90
91config QED_LL2
92	bool
93
94config QED_SRIOV
95	bool "QLogic QED 25/40/100Gb SR-IOV support"
96	depends on QED && PCI_IOV
97	default y
98	---help---
99	  This configuration parameter enables Single Root Input Output
100	  Virtualization support for QED devices.
101	  This allows for virtual function acceleration in virtualized
102	  environments.
103
104config QEDE
105	tristate "QLogic QED 25/40/100Gb Ethernet NIC"
106	depends on QED
107	imply PTP_1588_CLOCK
108	---help---
109	  This enables the support for ...
110
111config QED_RDMA
112	bool
113
114config QED_ISCSI
115	bool
116
117config QED_FCOE
118	bool
119
120config QED_OOO
121	bool
122
123endif # NET_VENDOR_QLOGIC
124