1 /* 2 A Davicom DM9102/DM9102A/DM9102A+DM9801/DM9102A+DM9802 NIC fast 3 ethernet driver for Linux. 4 Copyright (C) 1997 Sten Wang 5 6 This program is free software; you can redistribute it and/or 7 modify it under the terms of the GNU General Public License 8 as published by the Free Software Foundation; either version 2 9 of the License, or (at your option) any later version. 10 11 This program is distributed in the hope that it will be useful, 12 but WITHOUT ANY WARRANTY; without even the implied warranty of 13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 14 GNU General Public License for more details. 15 16 DAVICOM Web-Site: www.davicom.com.tw 17 18 Author: Sten Wang, 886-3-5798797-8517, E-mail: sten_wang@davicom.com.tw 19 Maintainer: Tobias Ringstrom <tori@unhappy.mine.nu> 20 21 (C)Copyright 1997-1998 DAVICOM Semiconductor,Inc. All Rights Reserved. 22 23 Marcelo Tosatti <marcelo@conectiva.com.br> : 24 Made it compile in 2.3 (device to net_device) 25 26 Alan Cox <alan@lxorguk.ukuu.org.uk> : 27 Cleaned up for kernel merge. 28 Removed the back compatibility support 29 Reformatted, fixing spelling etc as I went 30 Removed IRQ 0-15 assumption 31 32 Jeff Garzik <jgarzik@pobox.com> : 33 Updated to use new PCI driver API. 34 Resource usage cleanups. 35 Report driver version to user. 36 37 Tobias Ringstrom <tori@unhappy.mine.nu> : 38 Cleaned up and added SMP safety. Thanks go to Jeff Garzik, 39 Andrew Morton and Frank Davis for the SMP safety fixes. 40 41 Vojtech Pavlik <vojtech@suse.cz> : 42 Cleaned up pointer arithmetics. 43 Fixed a lot of 64bit issues. 44 Cleaned up printk()s a bit. 45 Fixed some obvious big endian problems. 46 47 Tobias Ringstrom <tori@unhappy.mine.nu> : 48 Use time_after for jiffies calculation. Added ethtool 49 support. Updated PCI resource allocation. Do not 50 forget to unmap PCI mapped skbs. 51 52 Alan Cox <alan@lxorguk.ukuu.org.uk> 53 Added new PCI identifiers provided by Clear Zhang at ALi 54 for their 1563 ethernet device. 55 56 TODO 57 58 Check on 64 bit boxes. 59 Check and fix on big endian boxes. 60 61 Test and make sure PCI latency is now correct for all cases. 62 */ 63 64 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 65 66 #define DRV_NAME "dmfe" 67 #define DRV_VERSION "1.36.4" 68 #define DRV_RELDATE "2002-01-17" 69 70 #include <linux/module.h> 71 #include <linux/kernel.h> 72 #include <linux/string.h> 73 #include <linux/timer.h> 74 #include <linux/ptrace.h> 75 #include <linux/errno.h> 76 #include <linux/ioport.h> 77 #include <linux/interrupt.h> 78 #include <linux/pci.h> 79 #include <linux/dma-mapping.h> 80 #include <linux/init.h> 81 #include <linux/netdevice.h> 82 #include <linux/etherdevice.h> 83 #include <linux/ethtool.h> 84 #include <linux/skbuff.h> 85 #include <linux/delay.h> 86 #include <linux/spinlock.h> 87 #include <linux/crc32.h> 88 #include <linux/bitops.h> 89 90 #include <asm/processor.h> 91 #include <asm/io.h> 92 #include <asm/dma.h> 93 #include <asm/uaccess.h> 94 #include <asm/irq.h> 95 96 #ifdef CONFIG_TULIP_DM910X 97 #include <linux/of.h> 98 #endif 99 100 101 /* Board/System/Debug information/definition ---------------- */ 102 #define PCI_DM9132_ID 0x91321282 /* Davicom DM9132 ID */ 103 #define PCI_DM9102_ID 0x91021282 /* Davicom DM9102 ID */ 104 #define PCI_DM9100_ID 0x91001282 /* Davicom DM9100 ID */ 105 #define PCI_DM9009_ID 0x90091282 /* Davicom DM9009 ID */ 106 107 #define DM9102_IO_SIZE 0x80 108 #define DM9102A_IO_SIZE 0x100 109 #define TX_MAX_SEND_CNT 0x1 /* Maximum tx packet per time */ 110 #define TX_DESC_CNT 0x10 /* Allocated Tx descriptors */ 111 #define RX_DESC_CNT 0x20 /* Allocated Rx descriptors */ 112 #define TX_FREE_DESC_CNT (TX_DESC_CNT - 2) /* Max TX packet count */ 113 #define TX_WAKE_DESC_CNT (TX_DESC_CNT - 3) /* TX wakeup count */ 114 #define DESC_ALL_CNT (TX_DESC_CNT + RX_DESC_CNT) 115 #define TX_BUF_ALLOC 0x600 116 #define RX_ALLOC_SIZE 0x620 117 #define DM910X_RESET 1 118 #define CR0_DEFAULT 0x00E00000 /* TX & RX burst mode */ 119 #define CR6_DEFAULT 0x00080000 /* HD */ 120 #define CR7_DEFAULT 0x180c1 121 #define CR15_DEFAULT 0x06 /* TxJabber RxWatchdog */ 122 #define TDES0_ERR_MASK 0x4302 /* TXJT, LC, EC, FUE */ 123 #define MAX_PACKET_SIZE 1514 124 #define DMFE_MAX_MULTICAST 14 125 #define RX_COPY_SIZE 100 126 #define MAX_CHECK_PACKET 0x8000 127 #define DM9801_NOISE_FLOOR 8 128 #define DM9802_NOISE_FLOOR 5 129 130 #define DMFE_WOL_LINKCHANGE 0x20000000 131 #define DMFE_WOL_SAMPLEPACKET 0x10000000 132 #define DMFE_WOL_MAGICPACKET 0x08000000 133 134 135 #define DMFE_10MHF 0 136 #define DMFE_100MHF 1 137 #define DMFE_10MFD 4 138 #define DMFE_100MFD 5 139 #define DMFE_AUTO 8 140 #define DMFE_1M_HPNA 0x10 141 142 #define DMFE_TXTH_72 0x400000 /* TX TH 72 byte */ 143 #define DMFE_TXTH_96 0x404000 /* TX TH 96 byte */ 144 #define DMFE_TXTH_128 0x0000 /* TX TH 128 byte */ 145 #define DMFE_TXTH_256 0x4000 /* TX TH 256 byte */ 146 #define DMFE_TXTH_512 0x8000 /* TX TH 512 byte */ 147 #define DMFE_TXTH_1K 0xC000 /* TX TH 1K byte */ 148 149 #define DMFE_TIMER_WUT (jiffies + HZ * 1)/* timer wakeup time : 1 second */ 150 #define DMFE_TX_TIMEOUT ((3*HZ)/2) /* tx packet time-out time 1.5 s" */ 151 #define DMFE_TX_KICK (HZ/2) /* tx packet Kick-out time 0.5 s" */ 152 153 #define dw32(reg, val) iowrite32(val, ioaddr + (reg)) 154 #define dw16(reg, val) iowrite16(val, ioaddr + (reg)) 155 #define dr32(reg) ioread32(ioaddr + (reg)) 156 #define dr16(reg) ioread16(ioaddr + (reg)) 157 #define dr8(reg) ioread8(ioaddr + (reg)) 158 159 #define DMFE_DBUG(dbug_now, msg, value) \ 160 do { \ 161 if (dmfe_debug || (dbug_now)) \ 162 pr_err("%s %lx\n", \ 163 (msg), (long) (value)); \ 164 } while (0) 165 166 #define SHOW_MEDIA_TYPE(mode) \ 167 pr_info("Change Speed to %sMhz %s duplex\n" , \ 168 (mode & 1) ? "100":"10", \ 169 (mode & 4) ? "full":"half"); 170 171 172 /* CR9 definition: SROM/MII */ 173 #define CR9_SROM_READ 0x4800 174 #define CR9_SRCS 0x1 175 #define CR9_SRCLK 0x2 176 #define CR9_CRDOUT 0x8 177 #define SROM_DATA_0 0x0 178 #define SROM_DATA_1 0x4 179 #define PHY_DATA_1 0x20000 180 #define PHY_DATA_0 0x00000 181 #define MDCLKH 0x10000 182 183 #define PHY_POWER_DOWN 0x800 184 185 #define SROM_V41_CODE 0x14 186 187 #define __CHK_IO_SIZE(pci_id, dev_rev) \ 188 (( ((pci_id)==PCI_DM9132_ID) || ((dev_rev) >= 0x30) ) ? \ 189 DM9102A_IO_SIZE: DM9102_IO_SIZE) 190 191 #define CHK_IO_SIZE(pci_dev) \ 192 (__CHK_IO_SIZE(((pci_dev)->device << 16) | (pci_dev)->vendor, \ 193 (pci_dev)->revision)) 194 195 /* Structure/enum declaration ------------------------------- */ 196 struct tx_desc { 197 __le32 tdes0, tdes1, tdes2, tdes3; /* Data for the card */ 198 char *tx_buf_ptr; /* Data for us */ 199 struct tx_desc *next_tx_desc; 200 } __attribute__(( aligned(32) )); 201 202 struct rx_desc { 203 __le32 rdes0, rdes1, rdes2, rdes3; /* Data for the card */ 204 struct sk_buff *rx_skb_ptr; /* Data for us */ 205 struct rx_desc *next_rx_desc; 206 } __attribute__(( aligned(32) )); 207 208 struct dmfe_board_info { 209 u32 chip_id; /* Chip vendor/Device ID */ 210 u8 chip_revision; /* Chip revision */ 211 struct net_device *next_dev; /* next device */ 212 struct pci_dev *pdev; /* PCI device */ 213 spinlock_t lock; 214 215 void __iomem *ioaddr; /* I/O base address */ 216 u32 cr0_data; 217 u32 cr5_data; 218 u32 cr6_data; 219 u32 cr7_data; 220 u32 cr15_data; 221 222 /* pointer for memory physical address */ 223 dma_addr_t buf_pool_dma_ptr; /* Tx buffer pool memory */ 224 dma_addr_t buf_pool_dma_start; /* Tx buffer pool align dword */ 225 dma_addr_t desc_pool_dma_ptr; /* descriptor pool memory */ 226 dma_addr_t first_tx_desc_dma; 227 dma_addr_t first_rx_desc_dma; 228 229 /* descriptor pointer */ 230 unsigned char *buf_pool_ptr; /* Tx buffer pool memory */ 231 unsigned char *buf_pool_start; /* Tx buffer pool align dword */ 232 unsigned char *desc_pool_ptr; /* descriptor pool memory */ 233 struct tx_desc *first_tx_desc; 234 struct tx_desc *tx_insert_ptr; 235 struct tx_desc *tx_remove_ptr; 236 struct rx_desc *first_rx_desc; 237 struct rx_desc *rx_insert_ptr; 238 struct rx_desc *rx_ready_ptr; /* packet come pointer */ 239 unsigned long tx_packet_cnt; /* transmitted packet count */ 240 unsigned long tx_queue_cnt; /* wait to send packet count */ 241 unsigned long rx_avail_cnt; /* available rx descriptor count */ 242 unsigned long interval_rx_cnt; /* rx packet count a callback time */ 243 244 u16 HPNA_command; /* For HPNA register 16 */ 245 u16 HPNA_timer; /* For HPNA remote device check */ 246 u16 dbug_cnt; 247 u16 NIC_capability; /* NIC media capability */ 248 u16 PHY_reg4; /* Saved Phyxcer register 4 value */ 249 250 u8 HPNA_present; /* 0:none, 1:DM9801, 2:DM9802 */ 251 u8 chip_type; /* Keep DM9102A chip type */ 252 u8 media_mode; /* user specify media mode */ 253 u8 op_mode; /* real work media mode */ 254 u8 phy_addr; 255 u8 wait_reset; /* Hardware failed, need to reset */ 256 u8 dm910x_chk_mode; /* Operating mode check */ 257 u8 first_in_callback; /* Flag to record state */ 258 u8 wol_mode; /* user WOL settings */ 259 struct timer_list timer; 260 261 /* Driver defined statistic counter */ 262 unsigned long tx_fifo_underrun; 263 unsigned long tx_loss_carrier; 264 unsigned long tx_no_carrier; 265 unsigned long tx_late_collision; 266 unsigned long tx_excessive_collision; 267 unsigned long tx_jabber_timeout; 268 unsigned long reset_count; 269 unsigned long reset_cr8; 270 unsigned long reset_fatal; 271 unsigned long reset_TXtimeout; 272 273 /* NIC SROM data */ 274 unsigned char srom[128]; 275 }; 276 277 enum dmfe_offsets { 278 DCR0 = 0x00, DCR1 = 0x08, DCR2 = 0x10, DCR3 = 0x18, DCR4 = 0x20, 279 DCR5 = 0x28, DCR6 = 0x30, DCR7 = 0x38, DCR8 = 0x40, DCR9 = 0x48, 280 DCR10 = 0x50, DCR11 = 0x58, DCR12 = 0x60, DCR13 = 0x68, DCR14 = 0x70, 281 DCR15 = 0x78 282 }; 283 284 enum dmfe_CR6_bits { 285 CR6_RXSC = 0x2, CR6_PBF = 0x8, CR6_PM = 0x40, CR6_PAM = 0x80, 286 CR6_FDM = 0x200, CR6_TXSC = 0x2000, CR6_STI = 0x100000, 287 CR6_SFT = 0x200000, CR6_RXA = 0x40000000, CR6_NO_PURGE = 0x20000000 288 }; 289 290 /* Global variable declaration ----------------------------- */ 291 static int printed_version; 292 static const char version[] = 293 "Davicom DM9xxx net driver, version " DRV_VERSION " (" DRV_RELDATE ")"; 294 295 static int dmfe_debug; 296 static unsigned char dmfe_media_mode = DMFE_AUTO; 297 static u32 dmfe_cr6_user_set; 298 299 /* For module input parameter */ 300 static int debug; 301 static u32 cr6set; 302 static unsigned char mode = 8; 303 static u8 chkmode = 1; 304 static u8 HPNA_mode; /* Default: Low Power/High Speed */ 305 static u8 HPNA_rx_cmd; /* Default: Disable Rx remote command */ 306 static u8 HPNA_tx_cmd; /* Default: Don't issue remote command */ 307 static u8 HPNA_NoiseFloor; /* Default: HPNA NoiseFloor */ 308 static u8 SF_mode; /* Special Function: 1:VLAN, 2:RX Flow Control 309 4: TX pause packet */ 310 311 312 /* function declaration ------------------------------------- */ 313 static int dmfe_open(struct net_device *); 314 static netdev_tx_t dmfe_start_xmit(struct sk_buff *, struct net_device *); 315 static int dmfe_stop(struct net_device *); 316 static void dmfe_set_filter_mode(struct net_device *); 317 static const struct ethtool_ops netdev_ethtool_ops; 318 static u16 read_srom_word(void __iomem *, int); 319 static irqreturn_t dmfe_interrupt(int , void *); 320 #ifdef CONFIG_NET_POLL_CONTROLLER 321 static void poll_dmfe (struct net_device *dev); 322 #endif 323 static void dmfe_descriptor_init(struct net_device *); 324 static void allocate_rx_buffer(struct net_device *); 325 static void update_cr6(u32, void __iomem *); 326 static void send_filter_frame(struct net_device *); 327 static void dm9132_id_table(struct net_device *); 328 static u16 dmfe_phy_read(void __iomem *, u8, u8, u32); 329 static void dmfe_phy_write(void __iomem *, u8, u8, u16, u32); 330 static void dmfe_phy_write_1bit(void __iomem *, u32); 331 static u16 dmfe_phy_read_1bit(void __iomem *); 332 static u8 dmfe_sense_speed(struct dmfe_board_info *); 333 static void dmfe_process_mode(struct dmfe_board_info *); 334 static void dmfe_timer(unsigned long); 335 static inline u32 cal_CRC(unsigned char *, unsigned int, u8); 336 static void dmfe_rx_packet(struct net_device *, struct dmfe_board_info *); 337 static void dmfe_free_tx_pkt(struct net_device *, struct dmfe_board_info *); 338 static void dmfe_reuse_skb(struct dmfe_board_info *, struct sk_buff *); 339 static void dmfe_dynamic_reset(struct net_device *); 340 static void dmfe_free_rxbuffer(struct dmfe_board_info *); 341 static void dmfe_init_dm910x(struct net_device *); 342 static void dmfe_parse_srom(struct dmfe_board_info *); 343 static void dmfe_program_DM9801(struct dmfe_board_info *, int); 344 static void dmfe_program_DM9802(struct dmfe_board_info *); 345 static void dmfe_HPNA_remote_cmd_chk(struct dmfe_board_info * ); 346 static void dmfe_set_phyxcer(struct dmfe_board_info *); 347 348 /* DM910X network board routine ---------------------------- */ 349 350 static const struct net_device_ops netdev_ops = { 351 .ndo_open = dmfe_open, 352 .ndo_stop = dmfe_stop, 353 .ndo_start_xmit = dmfe_start_xmit, 354 .ndo_set_rx_mode = dmfe_set_filter_mode, 355 .ndo_set_mac_address = eth_mac_addr, 356 .ndo_validate_addr = eth_validate_addr, 357 #ifdef CONFIG_NET_POLL_CONTROLLER 358 .ndo_poll_controller = poll_dmfe, 359 #endif 360 }; 361 362 /* 363 * Search DM910X board ,allocate space and register it 364 */ 365 366 static int dmfe_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) 367 { 368 struct dmfe_board_info *db; /* board information structure */ 369 struct net_device *dev; 370 u32 pci_pmr; 371 int i, err; 372 373 DMFE_DBUG(0, "dmfe_init_one()", 0); 374 375 if (!printed_version++) 376 pr_info("%s\n", version); 377 378 /* 379 * SPARC on-board DM910x chips should be handled by the main 380 * tulip driver, except for early DM9100s. 381 */ 382 #ifdef CONFIG_TULIP_DM910X 383 if ((ent->driver_data == PCI_DM9100_ID && pdev->revision >= 0x30) || 384 ent->driver_data == PCI_DM9102_ID) { 385 struct device_node *dp = pci_device_to_OF_node(pdev); 386 387 if (dp && of_get_property(dp, "local-mac-address", NULL)) { 388 pr_info("skipping on-board DM910x (use tulip)\n"); 389 return -ENODEV; 390 } 391 } 392 #endif 393 394 /* Init network device */ 395 dev = alloc_etherdev(sizeof(*db)); 396 if (dev == NULL) 397 return -ENOMEM; 398 SET_NETDEV_DEV(dev, &pdev->dev); 399 400 if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) { 401 pr_warn("32-bit PCI DMA not available\n"); 402 err = -ENODEV; 403 goto err_out_free; 404 } 405 406 /* Enable Master/IO access, Disable memory access */ 407 err = pci_enable_device(pdev); 408 if (err) 409 goto err_out_free; 410 411 if (!pci_resource_start(pdev, 0)) { 412 pr_err("I/O base is zero\n"); 413 err = -ENODEV; 414 goto err_out_disable; 415 } 416 417 if (pci_resource_len(pdev, 0) < (CHK_IO_SIZE(pdev)) ) { 418 pr_err("Allocated I/O size too small\n"); 419 err = -ENODEV; 420 goto err_out_disable; 421 } 422 423 #if 0 /* pci_{enable_device,set_master} sets minimum latency for us now */ 424 425 /* Set Latency Timer 80h */ 426 /* FIXME: setting values > 32 breaks some SiS 559x stuff. 427 Need a PCI quirk.. */ 428 429 pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x80); 430 #endif 431 432 if (pci_request_regions(pdev, DRV_NAME)) { 433 pr_err("Failed to request PCI regions\n"); 434 err = -ENODEV; 435 goto err_out_disable; 436 } 437 438 /* Init system & device */ 439 db = netdev_priv(dev); 440 441 /* Allocate Tx/Rx descriptor memory */ 442 db->desc_pool_ptr = pci_alloc_consistent(pdev, sizeof(struct tx_desc) * 443 DESC_ALL_CNT + 0x20, &db->desc_pool_dma_ptr); 444 if (!db->desc_pool_ptr) { 445 err = -ENOMEM; 446 goto err_out_res; 447 } 448 449 db->buf_pool_ptr = pci_alloc_consistent(pdev, TX_BUF_ALLOC * 450 TX_DESC_CNT + 4, &db->buf_pool_dma_ptr); 451 if (!db->buf_pool_ptr) { 452 err = -ENOMEM; 453 goto err_out_free_desc; 454 } 455 456 db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr; 457 db->first_tx_desc_dma = db->desc_pool_dma_ptr; 458 db->buf_pool_start = db->buf_pool_ptr; 459 db->buf_pool_dma_start = db->buf_pool_dma_ptr; 460 461 db->chip_id = ent->driver_data; 462 /* IO type range. */ 463 db->ioaddr = pci_iomap(pdev, 0, 0); 464 if (!db->ioaddr) { 465 err = -ENOMEM; 466 goto err_out_free_buf; 467 } 468 469 db->chip_revision = pdev->revision; 470 db->wol_mode = 0; 471 472 db->pdev = pdev; 473 474 pci_set_drvdata(pdev, dev); 475 dev->netdev_ops = &netdev_ops; 476 dev->ethtool_ops = &netdev_ethtool_ops; 477 netif_carrier_off(dev); 478 spin_lock_init(&db->lock); 479 480 pci_read_config_dword(pdev, 0x50, &pci_pmr); 481 pci_pmr &= 0x70000; 482 if ( (pci_pmr == 0x10000) && (db->chip_revision == 0x31) ) 483 db->chip_type = 1; /* DM9102A E3 */ 484 else 485 db->chip_type = 0; 486 487 /* read 64 word srom data */ 488 for (i = 0; i < 64; i++) { 489 ((__le16 *) db->srom)[i] = 490 cpu_to_le16(read_srom_word(db->ioaddr, i)); 491 } 492 493 /* Set Node address */ 494 for (i = 0; i < 6; i++) 495 dev->dev_addr[i] = db->srom[20 + i]; 496 497 err = register_netdev (dev); 498 if (err) 499 goto err_out_unmap; 500 501 dev_info(&dev->dev, "Davicom DM%04lx at pci%s, %pM, irq %d\n", 502 ent->driver_data >> 16, 503 pci_name(pdev), dev->dev_addr, pdev->irq); 504 505 pci_set_master(pdev); 506 507 return 0; 508 509 err_out_unmap: 510 pci_iounmap(pdev, db->ioaddr); 511 err_out_free_buf: 512 pci_free_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, 513 db->buf_pool_ptr, db->buf_pool_dma_ptr); 514 err_out_free_desc: 515 pci_free_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20, 516 db->desc_pool_ptr, db->desc_pool_dma_ptr); 517 err_out_res: 518 pci_release_regions(pdev); 519 err_out_disable: 520 pci_disable_device(pdev); 521 err_out_free: 522 free_netdev(dev); 523 524 return err; 525 } 526 527 528 static void dmfe_remove_one(struct pci_dev *pdev) 529 { 530 struct net_device *dev = pci_get_drvdata(pdev); 531 struct dmfe_board_info *db = netdev_priv(dev); 532 533 DMFE_DBUG(0, "dmfe_remove_one()", 0); 534 535 if (dev) { 536 537 unregister_netdev(dev); 538 pci_iounmap(db->pdev, db->ioaddr); 539 pci_free_consistent(db->pdev, sizeof(struct tx_desc) * 540 DESC_ALL_CNT + 0x20, db->desc_pool_ptr, 541 db->desc_pool_dma_ptr); 542 pci_free_consistent(db->pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, 543 db->buf_pool_ptr, db->buf_pool_dma_ptr); 544 pci_release_regions(pdev); 545 free_netdev(dev); /* free board information */ 546 } 547 548 DMFE_DBUG(0, "dmfe_remove_one() exit", 0); 549 } 550 551 552 /* 553 * Open the interface. 554 * The interface is opened whenever "ifconfig" actives it. 555 */ 556 557 static int dmfe_open(struct net_device *dev) 558 { 559 struct dmfe_board_info *db = netdev_priv(dev); 560 const int irq = db->pdev->irq; 561 int ret; 562 563 DMFE_DBUG(0, "dmfe_open", 0); 564 565 ret = request_irq(irq, dmfe_interrupt, IRQF_SHARED, dev->name, dev); 566 if (ret) 567 return ret; 568 569 /* system variable init */ 570 db->cr6_data = CR6_DEFAULT | dmfe_cr6_user_set; 571 db->tx_packet_cnt = 0; 572 db->tx_queue_cnt = 0; 573 db->rx_avail_cnt = 0; 574 db->wait_reset = 0; 575 576 db->first_in_callback = 0; 577 db->NIC_capability = 0xf; /* All capability*/ 578 db->PHY_reg4 = 0x1e0; 579 580 /* CR6 operation mode decision */ 581 if ( !chkmode || (db->chip_id == PCI_DM9132_ID) || 582 (db->chip_revision >= 0x30) ) { 583 db->cr6_data |= DMFE_TXTH_256; 584 db->cr0_data = CR0_DEFAULT; 585 db->dm910x_chk_mode=4; /* Enter the normal mode */ 586 } else { 587 db->cr6_data |= CR6_SFT; /* Store & Forward mode */ 588 db->cr0_data = 0; 589 db->dm910x_chk_mode = 1; /* Enter the check mode */ 590 } 591 592 /* Initialize DM910X board */ 593 dmfe_init_dm910x(dev); 594 595 /* Active System Interface */ 596 netif_wake_queue(dev); 597 598 /* set and active a timer process */ 599 init_timer(&db->timer); 600 db->timer.expires = DMFE_TIMER_WUT + HZ * 2; 601 db->timer.data = (unsigned long)dev; 602 db->timer.function = dmfe_timer; 603 add_timer(&db->timer); 604 605 return 0; 606 } 607 608 609 /* Initialize DM910X board 610 * Reset DM910X board 611 * Initialize TX/Rx descriptor chain structure 612 * Send the set-up frame 613 * Enable Tx/Rx machine 614 */ 615 616 static void dmfe_init_dm910x(struct net_device *dev) 617 { 618 struct dmfe_board_info *db = netdev_priv(dev); 619 void __iomem *ioaddr = db->ioaddr; 620 621 DMFE_DBUG(0, "dmfe_init_dm910x()", 0); 622 623 /* Reset DM910x MAC controller */ 624 dw32(DCR0, DM910X_RESET); /* RESET MAC */ 625 udelay(100); 626 dw32(DCR0, db->cr0_data); 627 udelay(5); 628 629 /* Phy addr : DM910(A)2/DM9132/9801, phy address = 1 */ 630 db->phy_addr = 1; 631 632 /* Parser SROM and media mode */ 633 dmfe_parse_srom(db); 634 db->media_mode = dmfe_media_mode; 635 636 /* RESET Phyxcer Chip by GPR port bit 7 */ 637 dw32(DCR12, 0x180); /* Let bit 7 output port */ 638 if (db->chip_id == PCI_DM9009_ID) { 639 dw32(DCR12, 0x80); /* Issue RESET signal */ 640 mdelay(300); /* Delay 300 ms */ 641 } 642 dw32(DCR12, 0x0); /* Clear RESET signal */ 643 644 /* Process Phyxcer Media Mode */ 645 if ( !(db->media_mode & 0x10) ) /* Force 1M mode */ 646 dmfe_set_phyxcer(db); 647 648 /* Media Mode Process */ 649 if ( !(db->media_mode & DMFE_AUTO) ) 650 db->op_mode = db->media_mode; /* Force Mode */ 651 652 /* Initialize Transmit/Receive descriptor and CR3/4 */ 653 dmfe_descriptor_init(dev); 654 655 /* Init CR6 to program DM910x operation */ 656 update_cr6(db->cr6_data, ioaddr); 657 658 /* Send setup frame */ 659 if (db->chip_id == PCI_DM9132_ID) 660 dm9132_id_table(dev); /* DM9132 */ 661 else 662 send_filter_frame(dev); /* DM9102/DM9102A */ 663 664 /* Init CR7, interrupt active bit */ 665 db->cr7_data = CR7_DEFAULT; 666 dw32(DCR7, db->cr7_data); 667 668 /* Init CR15, Tx jabber and Rx watchdog timer */ 669 dw32(DCR15, db->cr15_data); 670 671 /* Enable DM910X Tx/Rx function */ 672 db->cr6_data |= CR6_RXSC | CR6_TXSC | 0x40000; 673 update_cr6(db->cr6_data, ioaddr); 674 } 675 676 677 /* 678 * Hardware start transmission. 679 * Send a packet to media from the upper layer. 680 */ 681 682 static netdev_tx_t dmfe_start_xmit(struct sk_buff *skb, 683 struct net_device *dev) 684 { 685 struct dmfe_board_info *db = netdev_priv(dev); 686 void __iomem *ioaddr = db->ioaddr; 687 struct tx_desc *txptr; 688 unsigned long flags; 689 690 DMFE_DBUG(0, "dmfe_start_xmit", 0); 691 692 /* Too large packet check */ 693 if (skb->len > MAX_PACKET_SIZE) { 694 pr_err("big packet = %d\n", (u16)skb->len); 695 dev_kfree_skb_any(skb); 696 return NETDEV_TX_OK; 697 } 698 699 /* Resource flag check */ 700 netif_stop_queue(dev); 701 702 spin_lock_irqsave(&db->lock, flags); 703 704 /* No Tx resource check, it never happen nromally */ 705 if (db->tx_queue_cnt >= TX_FREE_DESC_CNT) { 706 spin_unlock_irqrestore(&db->lock, flags); 707 pr_err("No Tx resource %ld\n", db->tx_queue_cnt); 708 return NETDEV_TX_BUSY; 709 } 710 711 /* Disable NIC interrupt */ 712 dw32(DCR7, 0); 713 714 /* transmit this packet */ 715 txptr = db->tx_insert_ptr; 716 skb_copy_from_linear_data(skb, txptr->tx_buf_ptr, skb->len); 717 txptr->tdes1 = cpu_to_le32(0xe1000000 | skb->len); 718 719 /* Point to next transmit free descriptor */ 720 db->tx_insert_ptr = txptr->next_tx_desc; 721 722 /* Transmit Packet Process */ 723 if ( (!db->tx_queue_cnt) && (db->tx_packet_cnt < TX_MAX_SEND_CNT) ) { 724 txptr->tdes0 = cpu_to_le32(0x80000000); /* Set owner bit */ 725 db->tx_packet_cnt++; /* Ready to send */ 726 dw32(DCR1, 0x1); /* Issue Tx polling */ 727 netif_trans_update(dev); /* saved time stamp */ 728 } else { 729 db->tx_queue_cnt++; /* queue TX packet */ 730 dw32(DCR1, 0x1); /* Issue Tx polling */ 731 } 732 733 /* Tx resource check */ 734 if ( db->tx_queue_cnt < TX_FREE_DESC_CNT ) 735 netif_wake_queue(dev); 736 737 /* Restore CR7 to enable interrupt */ 738 spin_unlock_irqrestore(&db->lock, flags); 739 dw32(DCR7, db->cr7_data); 740 741 /* free this SKB */ 742 dev_consume_skb_any(skb); 743 744 return NETDEV_TX_OK; 745 } 746 747 748 /* 749 * Stop the interface. 750 * The interface is stopped when it is brought. 751 */ 752 753 static int dmfe_stop(struct net_device *dev) 754 { 755 struct dmfe_board_info *db = netdev_priv(dev); 756 void __iomem *ioaddr = db->ioaddr; 757 758 DMFE_DBUG(0, "dmfe_stop", 0); 759 760 /* disable system */ 761 netif_stop_queue(dev); 762 763 /* deleted timer */ 764 del_timer_sync(&db->timer); 765 766 /* Reset & stop DM910X board */ 767 dw32(DCR0, DM910X_RESET); 768 udelay(100); 769 dmfe_phy_write(ioaddr, db->phy_addr, 0, 0x8000, db->chip_id); 770 771 /* free interrupt */ 772 free_irq(db->pdev->irq, dev); 773 774 /* free allocated rx buffer */ 775 dmfe_free_rxbuffer(db); 776 777 #if 0 778 /* show statistic counter */ 779 printk("FU:%lx EC:%lx LC:%lx NC:%lx LOC:%lx TXJT:%lx RESET:%lx RCR8:%lx FAL:%lx TT:%lx\n", 780 db->tx_fifo_underrun, db->tx_excessive_collision, 781 db->tx_late_collision, db->tx_no_carrier, db->tx_loss_carrier, 782 db->tx_jabber_timeout, db->reset_count, db->reset_cr8, 783 db->reset_fatal, db->reset_TXtimeout); 784 #endif 785 786 return 0; 787 } 788 789 790 /* 791 * DM9102 insterrupt handler 792 * receive the packet to upper layer, free the transmitted packet 793 */ 794 795 static irqreturn_t dmfe_interrupt(int irq, void *dev_id) 796 { 797 struct net_device *dev = dev_id; 798 struct dmfe_board_info *db = netdev_priv(dev); 799 void __iomem *ioaddr = db->ioaddr; 800 unsigned long flags; 801 802 DMFE_DBUG(0, "dmfe_interrupt()", 0); 803 804 spin_lock_irqsave(&db->lock, flags); 805 806 /* Got DM910X status */ 807 db->cr5_data = dr32(DCR5); 808 dw32(DCR5, db->cr5_data); 809 if ( !(db->cr5_data & 0xc1) ) { 810 spin_unlock_irqrestore(&db->lock, flags); 811 return IRQ_HANDLED; 812 } 813 814 /* Disable all interrupt in CR7 to solve the interrupt edge problem */ 815 dw32(DCR7, 0); 816 817 /* Check system status */ 818 if (db->cr5_data & 0x2000) { 819 /* system bus error happen */ 820 DMFE_DBUG(1, "System bus error happen. CR5=", db->cr5_data); 821 db->reset_fatal++; 822 db->wait_reset = 1; /* Need to RESET */ 823 spin_unlock_irqrestore(&db->lock, flags); 824 return IRQ_HANDLED; 825 } 826 827 /* Received the coming packet */ 828 if ( (db->cr5_data & 0x40) && db->rx_avail_cnt ) 829 dmfe_rx_packet(dev, db); 830 831 /* reallocate rx descriptor buffer */ 832 if (db->rx_avail_cnt<RX_DESC_CNT) 833 allocate_rx_buffer(dev); 834 835 /* Free the transmitted descriptor */ 836 if ( db->cr5_data & 0x01) 837 dmfe_free_tx_pkt(dev, db); 838 839 /* Mode Check */ 840 if (db->dm910x_chk_mode & 0x2) { 841 db->dm910x_chk_mode = 0x4; 842 db->cr6_data |= 0x100; 843 update_cr6(db->cr6_data, ioaddr); 844 } 845 846 /* Restore CR7 to enable interrupt mask */ 847 dw32(DCR7, db->cr7_data); 848 849 spin_unlock_irqrestore(&db->lock, flags); 850 return IRQ_HANDLED; 851 } 852 853 854 #ifdef CONFIG_NET_POLL_CONTROLLER 855 /* 856 * Polling 'interrupt' - used by things like netconsole to send skbs 857 * without having to re-enable interrupts. It's not called while 858 * the interrupt routine is executing. 859 */ 860 861 static void poll_dmfe (struct net_device *dev) 862 { 863 struct dmfe_board_info *db = netdev_priv(dev); 864 const int irq = db->pdev->irq; 865 866 /* disable_irq here is not very nice, but with the lockless 867 interrupt handler we have no other choice. */ 868 disable_irq(irq); 869 dmfe_interrupt (irq, dev); 870 enable_irq(irq); 871 } 872 #endif 873 874 /* 875 * Free TX resource after TX complete 876 */ 877 878 static void dmfe_free_tx_pkt(struct net_device *dev, struct dmfe_board_info *db) 879 { 880 struct tx_desc *txptr; 881 void __iomem *ioaddr = db->ioaddr; 882 u32 tdes0; 883 884 txptr = db->tx_remove_ptr; 885 while(db->tx_packet_cnt) { 886 tdes0 = le32_to_cpu(txptr->tdes0); 887 if (tdes0 & 0x80000000) 888 break; 889 890 /* A packet sent completed */ 891 db->tx_packet_cnt--; 892 dev->stats.tx_packets++; 893 894 /* Transmit statistic counter */ 895 if ( tdes0 != 0x7fffffff ) { 896 dev->stats.collisions += (tdes0 >> 3) & 0xf; 897 dev->stats.tx_bytes += le32_to_cpu(txptr->tdes1) & 0x7ff; 898 if (tdes0 & TDES0_ERR_MASK) { 899 dev->stats.tx_errors++; 900 901 if (tdes0 & 0x0002) { /* UnderRun */ 902 db->tx_fifo_underrun++; 903 if ( !(db->cr6_data & CR6_SFT) ) { 904 db->cr6_data = db->cr6_data | CR6_SFT; 905 update_cr6(db->cr6_data, ioaddr); 906 } 907 } 908 if (tdes0 & 0x0100) 909 db->tx_excessive_collision++; 910 if (tdes0 & 0x0200) 911 db->tx_late_collision++; 912 if (tdes0 & 0x0400) 913 db->tx_no_carrier++; 914 if (tdes0 & 0x0800) 915 db->tx_loss_carrier++; 916 if (tdes0 & 0x4000) 917 db->tx_jabber_timeout++; 918 } 919 } 920 921 txptr = txptr->next_tx_desc; 922 }/* End of while */ 923 924 /* Update TX remove pointer to next */ 925 db->tx_remove_ptr = txptr; 926 927 /* Send the Tx packet in queue */ 928 if ( (db->tx_packet_cnt < TX_MAX_SEND_CNT) && db->tx_queue_cnt ) { 929 txptr->tdes0 = cpu_to_le32(0x80000000); /* Set owner bit */ 930 db->tx_packet_cnt++; /* Ready to send */ 931 db->tx_queue_cnt--; 932 dw32(DCR1, 0x1); /* Issue Tx polling */ 933 netif_trans_update(dev); /* saved time stamp */ 934 } 935 936 /* Resource available check */ 937 if ( db->tx_queue_cnt < TX_WAKE_DESC_CNT ) 938 netif_wake_queue(dev); /* Active upper layer, send again */ 939 } 940 941 942 /* 943 * Calculate the CRC valude of the Rx packet 944 * flag = 1 : return the reverse CRC (for the received packet CRC) 945 * 0 : return the normal CRC (for Hash Table index) 946 */ 947 948 static inline u32 cal_CRC(unsigned char * Data, unsigned int Len, u8 flag) 949 { 950 u32 crc = crc32(~0, Data, Len); 951 if (flag) crc = ~crc; 952 return crc; 953 } 954 955 956 /* 957 * Receive the come packet and pass to upper layer 958 */ 959 960 static void dmfe_rx_packet(struct net_device *dev, struct dmfe_board_info *db) 961 { 962 struct rx_desc *rxptr; 963 struct sk_buff *skb, *newskb; 964 int rxlen; 965 u32 rdes0; 966 967 rxptr = db->rx_ready_ptr; 968 969 while(db->rx_avail_cnt) { 970 rdes0 = le32_to_cpu(rxptr->rdes0); 971 if (rdes0 & 0x80000000) /* packet owner check */ 972 break; 973 974 db->rx_avail_cnt--; 975 db->interval_rx_cnt++; 976 977 pci_unmap_single(db->pdev, le32_to_cpu(rxptr->rdes2), 978 RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE); 979 980 if ( (rdes0 & 0x300) != 0x300) { 981 /* A packet without First/Last flag */ 982 /* reuse this SKB */ 983 DMFE_DBUG(0, "Reuse SK buffer, rdes0", rdes0); 984 dmfe_reuse_skb(db, rxptr->rx_skb_ptr); 985 } else { 986 /* A packet with First/Last flag */ 987 rxlen = ( (rdes0 >> 16) & 0x3fff) - 4; 988 989 /* error summary bit check */ 990 if (rdes0 & 0x8000) { 991 /* This is a error packet */ 992 dev->stats.rx_errors++; 993 if (rdes0 & 1) 994 dev->stats.rx_fifo_errors++; 995 if (rdes0 & 2) 996 dev->stats.rx_crc_errors++; 997 if (rdes0 & 0x80) 998 dev->stats.rx_length_errors++; 999 } 1000 1001 if ( !(rdes0 & 0x8000) || 1002 ((db->cr6_data & CR6_PM) && (rxlen>6)) ) { 1003 skb = rxptr->rx_skb_ptr; 1004 1005 /* Received Packet CRC check need or not */ 1006 if ( (db->dm910x_chk_mode & 1) && 1007 (cal_CRC(skb->data, rxlen, 1) != 1008 (*(u32 *) (skb->data+rxlen) ))) { /* FIXME (?) */ 1009 /* Found a error received packet */ 1010 dmfe_reuse_skb(db, rxptr->rx_skb_ptr); 1011 db->dm910x_chk_mode = 3; 1012 } else { 1013 /* Good packet, send to upper layer */ 1014 /* Shorst packet used new SKB */ 1015 if ((rxlen < RX_COPY_SIZE) && 1016 ((newskb = netdev_alloc_skb(dev, rxlen + 2)) 1017 != NULL)) { 1018 1019 skb = newskb; 1020 /* size less than COPY_SIZE, allocate a rxlen SKB */ 1021 skb_reserve(skb, 2); /* 16byte align */ 1022 skb_copy_from_linear_data(rxptr->rx_skb_ptr, 1023 skb_put(skb, rxlen), 1024 rxlen); 1025 dmfe_reuse_skb(db, rxptr->rx_skb_ptr); 1026 } else 1027 skb_put(skb, rxlen); 1028 1029 skb->protocol = eth_type_trans(skb, dev); 1030 netif_rx(skb); 1031 dev->stats.rx_packets++; 1032 dev->stats.rx_bytes += rxlen; 1033 } 1034 } else { 1035 /* Reuse SKB buffer when the packet is error */ 1036 DMFE_DBUG(0, "Reuse SK buffer, rdes0", rdes0); 1037 dmfe_reuse_skb(db, rxptr->rx_skb_ptr); 1038 } 1039 } 1040 1041 rxptr = rxptr->next_rx_desc; 1042 } 1043 1044 db->rx_ready_ptr = rxptr; 1045 } 1046 1047 /* 1048 * Set DM910X multicast address 1049 */ 1050 1051 static void dmfe_set_filter_mode(struct net_device *dev) 1052 { 1053 struct dmfe_board_info *db = netdev_priv(dev); 1054 unsigned long flags; 1055 int mc_count = netdev_mc_count(dev); 1056 1057 DMFE_DBUG(0, "dmfe_set_filter_mode()", 0); 1058 spin_lock_irqsave(&db->lock, flags); 1059 1060 if (dev->flags & IFF_PROMISC) { 1061 DMFE_DBUG(0, "Enable PROM Mode", 0); 1062 db->cr6_data |= CR6_PM | CR6_PBF; 1063 update_cr6(db->cr6_data, db->ioaddr); 1064 spin_unlock_irqrestore(&db->lock, flags); 1065 return; 1066 } 1067 1068 if (dev->flags & IFF_ALLMULTI || mc_count > DMFE_MAX_MULTICAST) { 1069 DMFE_DBUG(0, "Pass all multicast address", mc_count); 1070 db->cr6_data &= ~(CR6_PM | CR6_PBF); 1071 db->cr6_data |= CR6_PAM; 1072 spin_unlock_irqrestore(&db->lock, flags); 1073 return; 1074 } 1075 1076 DMFE_DBUG(0, "Set multicast address", mc_count); 1077 if (db->chip_id == PCI_DM9132_ID) 1078 dm9132_id_table(dev); /* DM9132 */ 1079 else 1080 send_filter_frame(dev); /* DM9102/DM9102A */ 1081 spin_unlock_irqrestore(&db->lock, flags); 1082 } 1083 1084 /* 1085 * Ethtool interace 1086 */ 1087 1088 static void dmfe_ethtool_get_drvinfo(struct net_device *dev, 1089 struct ethtool_drvinfo *info) 1090 { 1091 struct dmfe_board_info *np = netdev_priv(dev); 1092 1093 strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); 1094 strlcpy(info->version, DRV_VERSION, sizeof(info->version)); 1095 strlcpy(info->bus_info, pci_name(np->pdev), sizeof(info->bus_info)); 1096 } 1097 1098 static int dmfe_ethtool_set_wol(struct net_device *dev, 1099 struct ethtool_wolinfo *wolinfo) 1100 { 1101 struct dmfe_board_info *db = netdev_priv(dev); 1102 1103 if (wolinfo->wolopts & (WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | 1104 WAKE_ARP | WAKE_MAGICSECURE)) 1105 return -EOPNOTSUPP; 1106 1107 db->wol_mode = wolinfo->wolopts; 1108 return 0; 1109 } 1110 1111 static void dmfe_ethtool_get_wol(struct net_device *dev, 1112 struct ethtool_wolinfo *wolinfo) 1113 { 1114 struct dmfe_board_info *db = netdev_priv(dev); 1115 1116 wolinfo->supported = WAKE_PHY | WAKE_MAGIC; 1117 wolinfo->wolopts = db->wol_mode; 1118 } 1119 1120 1121 static const struct ethtool_ops netdev_ethtool_ops = { 1122 .get_drvinfo = dmfe_ethtool_get_drvinfo, 1123 .get_link = ethtool_op_get_link, 1124 .set_wol = dmfe_ethtool_set_wol, 1125 .get_wol = dmfe_ethtool_get_wol, 1126 }; 1127 1128 /* 1129 * A periodic timer routine 1130 * Dynamic media sense, allocate Rx buffer... 1131 */ 1132 1133 static void dmfe_timer(unsigned long data) 1134 { 1135 struct net_device *dev = (struct net_device *)data; 1136 struct dmfe_board_info *db = netdev_priv(dev); 1137 void __iomem *ioaddr = db->ioaddr; 1138 u32 tmp_cr8; 1139 unsigned char tmp_cr12; 1140 unsigned long flags; 1141 1142 int link_ok, link_ok_phy; 1143 1144 DMFE_DBUG(0, "dmfe_timer()", 0); 1145 spin_lock_irqsave(&db->lock, flags); 1146 1147 /* Media mode process when Link OK before enter this route */ 1148 if (db->first_in_callback == 0) { 1149 db->first_in_callback = 1; 1150 if (db->chip_type && (db->chip_id==PCI_DM9102_ID)) { 1151 db->cr6_data &= ~0x40000; 1152 update_cr6(db->cr6_data, ioaddr); 1153 dmfe_phy_write(ioaddr, db->phy_addr, 0, 0x1000, db->chip_id); 1154 db->cr6_data |= 0x40000; 1155 update_cr6(db->cr6_data, ioaddr); 1156 db->timer.expires = DMFE_TIMER_WUT + HZ * 2; 1157 add_timer(&db->timer); 1158 spin_unlock_irqrestore(&db->lock, flags); 1159 return; 1160 } 1161 } 1162 1163 1164 /* Operating Mode Check */ 1165 if ( (db->dm910x_chk_mode & 0x1) && 1166 (dev->stats.rx_packets > MAX_CHECK_PACKET) ) 1167 db->dm910x_chk_mode = 0x4; 1168 1169 /* Dynamic reset DM910X : system error or transmit time-out */ 1170 tmp_cr8 = dr32(DCR8); 1171 if ( (db->interval_rx_cnt==0) && (tmp_cr8) ) { 1172 db->reset_cr8++; 1173 db->wait_reset = 1; 1174 } 1175 db->interval_rx_cnt = 0; 1176 1177 /* TX polling kick monitor */ 1178 if ( db->tx_packet_cnt && 1179 time_after(jiffies, dev_trans_start(dev) + DMFE_TX_KICK) ) { 1180 dw32(DCR1, 0x1); /* Tx polling again */ 1181 1182 /* TX Timeout */ 1183 if (time_after(jiffies, dev_trans_start(dev) + DMFE_TX_TIMEOUT) ) { 1184 db->reset_TXtimeout++; 1185 db->wait_reset = 1; 1186 dev_warn(&dev->dev, "Tx timeout - resetting\n"); 1187 } 1188 } 1189 1190 if (db->wait_reset) { 1191 DMFE_DBUG(0, "Dynamic Reset device", db->tx_packet_cnt); 1192 db->reset_count++; 1193 dmfe_dynamic_reset(dev); 1194 db->first_in_callback = 0; 1195 db->timer.expires = DMFE_TIMER_WUT; 1196 add_timer(&db->timer); 1197 spin_unlock_irqrestore(&db->lock, flags); 1198 return; 1199 } 1200 1201 /* Link status check, Dynamic media type change */ 1202 if (db->chip_id == PCI_DM9132_ID) 1203 tmp_cr12 = dr8(DCR9 + 3); /* DM9132 */ 1204 else 1205 tmp_cr12 = dr8(DCR12); /* DM9102/DM9102A */ 1206 1207 if ( ((db->chip_id == PCI_DM9102_ID) && 1208 (db->chip_revision == 0x30)) || 1209 ((db->chip_id == PCI_DM9132_ID) && 1210 (db->chip_revision == 0x10)) ) { 1211 /* DM9102A Chip */ 1212 if (tmp_cr12 & 2) 1213 link_ok = 0; 1214 else 1215 link_ok = 1; 1216 } 1217 else 1218 /*0x43 is used instead of 0x3 because bit 6 should represent 1219 link status of external PHY */ 1220 link_ok = (tmp_cr12 & 0x43) ? 1 : 0; 1221 1222 1223 /* If chip reports that link is failed it could be because external 1224 PHY link status pin is not connected correctly to chip 1225 To be sure ask PHY too. 1226 */ 1227 1228 /* need a dummy read because of PHY's register latch*/ 1229 dmfe_phy_read (db->ioaddr, db->phy_addr, 1, db->chip_id); 1230 link_ok_phy = (dmfe_phy_read (db->ioaddr, 1231 db->phy_addr, 1, db->chip_id) & 0x4) ? 1 : 0; 1232 1233 if (link_ok_phy != link_ok) { 1234 DMFE_DBUG (0, "PHY and chip report different link status", 0); 1235 link_ok = link_ok | link_ok_phy; 1236 } 1237 1238 if ( !link_ok && netif_carrier_ok(dev)) { 1239 /* Link Failed */ 1240 DMFE_DBUG(0, "Link Failed", tmp_cr12); 1241 netif_carrier_off(dev); 1242 1243 /* For Force 10/100M Half/Full mode: Enable Auto-Nego mode */ 1244 /* AUTO or force 1M Homerun/Longrun don't need */ 1245 if ( !(db->media_mode & 0x38) ) 1246 dmfe_phy_write(db->ioaddr, db->phy_addr, 1247 0, 0x1000, db->chip_id); 1248 1249 /* AUTO mode, if INT phyxcer link failed, select EXT device */ 1250 if (db->media_mode & DMFE_AUTO) { 1251 /* 10/100M link failed, used 1M Home-Net */ 1252 db->cr6_data|=0x00040000; /* bit18=1, MII */ 1253 db->cr6_data&=~0x00000200; /* bit9=0, HD mode */ 1254 update_cr6(db->cr6_data, ioaddr); 1255 } 1256 } else if (!netif_carrier_ok(dev)) { 1257 1258 DMFE_DBUG(0, "Link link OK", tmp_cr12); 1259 1260 /* Auto Sense Speed */ 1261 if ( !(db->media_mode & DMFE_AUTO) || !dmfe_sense_speed(db)) { 1262 netif_carrier_on(dev); 1263 SHOW_MEDIA_TYPE(db->op_mode); 1264 } 1265 1266 dmfe_process_mode(db); 1267 } 1268 1269 /* HPNA remote command check */ 1270 if (db->HPNA_command & 0xf00) { 1271 db->HPNA_timer--; 1272 if (!db->HPNA_timer) 1273 dmfe_HPNA_remote_cmd_chk(db); 1274 } 1275 1276 /* Timer active again */ 1277 db->timer.expires = DMFE_TIMER_WUT; 1278 add_timer(&db->timer); 1279 spin_unlock_irqrestore(&db->lock, flags); 1280 } 1281 1282 1283 /* 1284 * Dynamic reset the DM910X board 1285 * Stop DM910X board 1286 * Free Tx/Rx allocated memory 1287 * Reset DM910X board 1288 * Re-initialize DM910X board 1289 */ 1290 1291 static void dmfe_dynamic_reset(struct net_device *dev) 1292 { 1293 struct dmfe_board_info *db = netdev_priv(dev); 1294 void __iomem *ioaddr = db->ioaddr; 1295 1296 DMFE_DBUG(0, "dmfe_dynamic_reset()", 0); 1297 1298 /* Sopt MAC controller */ 1299 db->cr6_data &= ~(CR6_RXSC | CR6_TXSC); /* Disable Tx/Rx */ 1300 update_cr6(db->cr6_data, ioaddr); 1301 dw32(DCR7, 0); /* Disable Interrupt */ 1302 dw32(DCR5, dr32(DCR5)); 1303 1304 /* Disable upper layer interface */ 1305 netif_stop_queue(dev); 1306 1307 /* Free Rx Allocate buffer */ 1308 dmfe_free_rxbuffer(db); 1309 1310 /* system variable init */ 1311 db->tx_packet_cnt = 0; 1312 db->tx_queue_cnt = 0; 1313 db->rx_avail_cnt = 0; 1314 netif_carrier_off(dev); 1315 db->wait_reset = 0; 1316 1317 /* Re-initialize DM910X board */ 1318 dmfe_init_dm910x(dev); 1319 1320 /* Restart upper layer interface */ 1321 netif_wake_queue(dev); 1322 } 1323 1324 1325 /* 1326 * free all allocated rx buffer 1327 */ 1328 1329 static void dmfe_free_rxbuffer(struct dmfe_board_info * db) 1330 { 1331 DMFE_DBUG(0, "dmfe_free_rxbuffer()", 0); 1332 1333 /* free allocated rx buffer */ 1334 while (db->rx_avail_cnt) { 1335 dev_kfree_skb(db->rx_ready_ptr->rx_skb_ptr); 1336 db->rx_ready_ptr = db->rx_ready_ptr->next_rx_desc; 1337 db->rx_avail_cnt--; 1338 } 1339 } 1340 1341 1342 /* 1343 * Reuse the SK buffer 1344 */ 1345 1346 static void dmfe_reuse_skb(struct dmfe_board_info *db, struct sk_buff * skb) 1347 { 1348 struct rx_desc *rxptr = db->rx_insert_ptr; 1349 1350 if (!(rxptr->rdes0 & cpu_to_le32(0x80000000))) { 1351 rxptr->rx_skb_ptr = skb; 1352 rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, 1353 skb->data, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) ); 1354 wmb(); 1355 rxptr->rdes0 = cpu_to_le32(0x80000000); 1356 db->rx_avail_cnt++; 1357 db->rx_insert_ptr = rxptr->next_rx_desc; 1358 } else 1359 DMFE_DBUG(0, "SK Buffer reuse method error", db->rx_avail_cnt); 1360 } 1361 1362 1363 /* 1364 * Initialize transmit/Receive descriptor 1365 * Using Chain structure, and allocate Tx/Rx buffer 1366 */ 1367 1368 static void dmfe_descriptor_init(struct net_device *dev) 1369 { 1370 struct dmfe_board_info *db = netdev_priv(dev); 1371 void __iomem *ioaddr = db->ioaddr; 1372 struct tx_desc *tmp_tx; 1373 struct rx_desc *tmp_rx; 1374 unsigned char *tmp_buf; 1375 dma_addr_t tmp_tx_dma, tmp_rx_dma; 1376 dma_addr_t tmp_buf_dma; 1377 int i; 1378 1379 DMFE_DBUG(0, "dmfe_descriptor_init()", 0); 1380 1381 /* tx descriptor start pointer */ 1382 db->tx_insert_ptr = db->first_tx_desc; 1383 db->tx_remove_ptr = db->first_tx_desc; 1384 dw32(DCR4, db->first_tx_desc_dma); /* TX DESC address */ 1385 1386 /* rx descriptor start pointer */ 1387 db->first_rx_desc = (void *)db->first_tx_desc + 1388 sizeof(struct tx_desc) * TX_DESC_CNT; 1389 1390 db->first_rx_desc_dma = db->first_tx_desc_dma + 1391 sizeof(struct tx_desc) * TX_DESC_CNT; 1392 db->rx_insert_ptr = db->first_rx_desc; 1393 db->rx_ready_ptr = db->first_rx_desc; 1394 dw32(DCR3, db->first_rx_desc_dma); /* RX DESC address */ 1395 1396 /* Init Transmit chain */ 1397 tmp_buf = db->buf_pool_start; 1398 tmp_buf_dma = db->buf_pool_dma_start; 1399 tmp_tx_dma = db->first_tx_desc_dma; 1400 for (tmp_tx = db->first_tx_desc, i = 0; i < TX_DESC_CNT; i++, tmp_tx++) { 1401 tmp_tx->tx_buf_ptr = tmp_buf; 1402 tmp_tx->tdes0 = cpu_to_le32(0); 1403 tmp_tx->tdes1 = cpu_to_le32(0x81000000); /* IC, chain */ 1404 tmp_tx->tdes2 = cpu_to_le32(tmp_buf_dma); 1405 tmp_tx_dma += sizeof(struct tx_desc); 1406 tmp_tx->tdes3 = cpu_to_le32(tmp_tx_dma); 1407 tmp_tx->next_tx_desc = tmp_tx + 1; 1408 tmp_buf = tmp_buf + TX_BUF_ALLOC; 1409 tmp_buf_dma = tmp_buf_dma + TX_BUF_ALLOC; 1410 } 1411 (--tmp_tx)->tdes3 = cpu_to_le32(db->first_tx_desc_dma); 1412 tmp_tx->next_tx_desc = db->first_tx_desc; 1413 1414 /* Init Receive descriptor chain */ 1415 tmp_rx_dma=db->first_rx_desc_dma; 1416 for (tmp_rx = db->first_rx_desc, i = 0; i < RX_DESC_CNT; i++, tmp_rx++) { 1417 tmp_rx->rdes0 = cpu_to_le32(0); 1418 tmp_rx->rdes1 = cpu_to_le32(0x01000600); 1419 tmp_rx_dma += sizeof(struct rx_desc); 1420 tmp_rx->rdes3 = cpu_to_le32(tmp_rx_dma); 1421 tmp_rx->next_rx_desc = tmp_rx + 1; 1422 } 1423 (--tmp_rx)->rdes3 = cpu_to_le32(db->first_rx_desc_dma); 1424 tmp_rx->next_rx_desc = db->first_rx_desc; 1425 1426 /* pre-allocate Rx buffer */ 1427 allocate_rx_buffer(dev); 1428 } 1429 1430 1431 /* 1432 * Update CR6 value 1433 * Firstly stop DM910X , then written value and start 1434 */ 1435 1436 static void update_cr6(u32 cr6_data, void __iomem *ioaddr) 1437 { 1438 u32 cr6_tmp; 1439 1440 cr6_tmp = cr6_data & ~0x2002; /* stop Tx/Rx */ 1441 dw32(DCR6, cr6_tmp); 1442 udelay(5); 1443 dw32(DCR6, cr6_data); 1444 udelay(5); 1445 } 1446 1447 1448 /* 1449 * Send a setup frame for DM9132 1450 * This setup frame initialize DM910X address filter mode 1451 */ 1452 1453 static void dm9132_id_table(struct net_device *dev) 1454 { 1455 struct dmfe_board_info *db = netdev_priv(dev); 1456 void __iomem *ioaddr = db->ioaddr + 0xc0; 1457 u16 *addrptr = (u16 *)dev->dev_addr; 1458 struct netdev_hw_addr *ha; 1459 u16 i, hash_table[4]; 1460 1461 /* Node address */ 1462 for (i = 0; i < 3; i++) { 1463 dw16(0, addrptr[i]); 1464 ioaddr += 4; 1465 } 1466 1467 /* Clear Hash Table */ 1468 memset(hash_table, 0, sizeof(hash_table)); 1469 1470 /* broadcast address */ 1471 hash_table[3] = 0x8000; 1472 1473 /* the multicast address in Hash Table : 64 bits */ 1474 netdev_for_each_mc_addr(ha, dev) { 1475 u32 hash_val = cal_CRC((char *)ha->addr, 6, 0) & 0x3f; 1476 1477 hash_table[hash_val / 16] |= (u16) 1 << (hash_val % 16); 1478 } 1479 1480 /* Write the hash table to MAC MD table */ 1481 for (i = 0; i < 4; i++, ioaddr += 4) 1482 dw16(0, hash_table[i]); 1483 } 1484 1485 1486 /* 1487 * Send a setup frame for DM9102/DM9102A 1488 * This setup frame initialize DM910X address filter mode 1489 */ 1490 1491 static void send_filter_frame(struct net_device *dev) 1492 { 1493 struct dmfe_board_info *db = netdev_priv(dev); 1494 struct netdev_hw_addr *ha; 1495 struct tx_desc *txptr; 1496 u16 * addrptr; 1497 u32 * suptr; 1498 int i; 1499 1500 DMFE_DBUG(0, "send_filter_frame()", 0); 1501 1502 txptr = db->tx_insert_ptr; 1503 suptr = (u32 *) txptr->tx_buf_ptr; 1504 1505 /* Node address */ 1506 addrptr = (u16 *) dev->dev_addr; 1507 *suptr++ = addrptr[0]; 1508 *suptr++ = addrptr[1]; 1509 *suptr++ = addrptr[2]; 1510 1511 /* broadcast address */ 1512 *suptr++ = 0xffff; 1513 *suptr++ = 0xffff; 1514 *suptr++ = 0xffff; 1515 1516 /* fit the multicast address */ 1517 netdev_for_each_mc_addr(ha, dev) { 1518 addrptr = (u16 *) ha->addr; 1519 *suptr++ = addrptr[0]; 1520 *suptr++ = addrptr[1]; 1521 *suptr++ = addrptr[2]; 1522 } 1523 1524 for (i = netdev_mc_count(dev); i < 14; i++) { 1525 *suptr++ = 0xffff; 1526 *suptr++ = 0xffff; 1527 *suptr++ = 0xffff; 1528 } 1529 1530 /* prepare the setup frame */ 1531 db->tx_insert_ptr = txptr->next_tx_desc; 1532 txptr->tdes1 = cpu_to_le32(0x890000c0); 1533 1534 /* Resource Check and Send the setup packet */ 1535 if (!db->tx_packet_cnt) { 1536 void __iomem *ioaddr = db->ioaddr; 1537 1538 /* Resource Empty */ 1539 db->tx_packet_cnt++; 1540 txptr->tdes0 = cpu_to_le32(0x80000000); 1541 update_cr6(db->cr6_data | 0x2000, ioaddr); 1542 dw32(DCR1, 0x1); /* Issue Tx polling */ 1543 update_cr6(db->cr6_data, ioaddr); 1544 netif_trans_update(dev); 1545 } else 1546 db->tx_queue_cnt++; /* Put in TX queue */ 1547 } 1548 1549 1550 /* 1551 * Allocate rx buffer, 1552 * As possible as allocate maxiumn Rx buffer 1553 */ 1554 1555 static void allocate_rx_buffer(struct net_device *dev) 1556 { 1557 struct dmfe_board_info *db = netdev_priv(dev); 1558 struct rx_desc *rxptr; 1559 struct sk_buff *skb; 1560 1561 rxptr = db->rx_insert_ptr; 1562 1563 while(db->rx_avail_cnt < RX_DESC_CNT) { 1564 if ( ( skb = netdev_alloc_skb(dev, RX_ALLOC_SIZE) ) == NULL ) 1565 break; 1566 rxptr->rx_skb_ptr = skb; /* FIXME (?) */ 1567 rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->data, 1568 RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) ); 1569 wmb(); 1570 rxptr->rdes0 = cpu_to_le32(0x80000000); 1571 rxptr = rxptr->next_rx_desc; 1572 db->rx_avail_cnt++; 1573 } 1574 1575 db->rx_insert_ptr = rxptr; 1576 } 1577 1578 static void srom_clk_write(void __iomem *ioaddr, u32 data) 1579 { 1580 static const u32 cmd[] = { 1581 CR9_SROM_READ | CR9_SRCS, 1582 CR9_SROM_READ | CR9_SRCS | CR9_SRCLK, 1583 CR9_SROM_READ | CR9_SRCS 1584 }; 1585 int i; 1586 1587 for (i = 0; i < ARRAY_SIZE(cmd); i++) { 1588 dw32(DCR9, data | cmd[i]); 1589 udelay(5); 1590 } 1591 } 1592 1593 /* 1594 * Read one word data from the serial ROM 1595 */ 1596 static u16 read_srom_word(void __iomem *ioaddr, int offset) 1597 { 1598 u16 srom_data; 1599 int i; 1600 1601 dw32(DCR9, CR9_SROM_READ); 1602 udelay(5); 1603 dw32(DCR9, CR9_SROM_READ | CR9_SRCS); 1604 udelay(5); 1605 1606 /* Send the Read Command 110b */ 1607 srom_clk_write(ioaddr, SROM_DATA_1); 1608 srom_clk_write(ioaddr, SROM_DATA_1); 1609 srom_clk_write(ioaddr, SROM_DATA_0); 1610 1611 /* Send the offset */ 1612 for (i = 5; i >= 0; i--) { 1613 srom_data = (offset & (1 << i)) ? SROM_DATA_1 : SROM_DATA_0; 1614 srom_clk_write(ioaddr, srom_data); 1615 } 1616 1617 dw32(DCR9, CR9_SROM_READ | CR9_SRCS); 1618 udelay(5); 1619 1620 for (i = 16; i > 0; i--) { 1621 dw32(DCR9, CR9_SROM_READ | CR9_SRCS | CR9_SRCLK); 1622 udelay(5); 1623 srom_data = (srom_data << 1) | 1624 ((dr32(DCR9) & CR9_CRDOUT) ? 1 : 0); 1625 dw32(DCR9, CR9_SROM_READ | CR9_SRCS); 1626 udelay(5); 1627 } 1628 1629 dw32(DCR9, CR9_SROM_READ); 1630 udelay(5); 1631 return srom_data; 1632 } 1633 1634 1635 /* 1636 * Auto sense the media mode 1637 */ 1638 1639 static u8 dmfe_sense_speed(struct dmfe_board_info *db) 1640 { 1641 void __iomem *ioaddr = db->ioaddr; 1642 u8 ErrFlag = 0; 1643 u16 phy_mode; 1644 1645 /* CR6 bit18=0, select 10/100M */ 1646 update_cr6(db->cr6_data & ~0x40000, ioaddr); 1647 1648 phy_mode = dmfe_phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id); 1649 phy_mode = dmfe_phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id); 1650 1651 if ( (phy_mode & 0x24) == 0x24 ) { 1652 if (db->chip_id == PCI_DM9132_ID) /* DM9132 */ 1653 phy_mode = dmfe_phy_read(db->ioaddr, 1654 db->phy_addr, 7, db->chip_id) & 0xf000; 1655 else /* DM9102/DM9102A */ 1656 phy_mode = dmfe_phy_read(db->ioaddr, 1657 db->phy_addr, 17, db->chip_id) & 0xf000; 1658 switch (phy_mode) { 1659 case 0x1000: db->op_mode = DMFE_10MHF; break; 1660 case 0x2000: db->op_mode = DMFE_10MFD; break; 1661 case 0x4000: db->op_mode = DMFE_100MHF; break; 1662 case 0x8000: db->op_mode = DMFE_100MFD; break; 1663 default: db->op_mode = DMFE_10MHF; 1664 ErrFlag = 1; 1665 break; 1666 } 1667 } else { 1668 db->op_mode = DMFE_10MHF; 1669 DMFE_DBUG(0, "Link Failed :", phy_mode); 1670 ErrFlag = 1; 1671 } 1672 1673 return ErrFlag; 1674 } 1675 1676 1677 /* 1678 * Set 10/100 phyxcer capability 1679 * AUTO mode : phyxcer register4 is NIC capability 1680 * Force mode: phyxcer register4 is the force media 1681 */ 1682 1683 static void dmfe_set_phyxcer(struct dmfe_board_info *db) 1684 { 1685 void __iomem *ioaddr = db->ioaddr; 1686 u16 phy_reg; 1687 1688 /* Select 10/100M phyxcer */ 1689 db->cr6_data &= ~0x40000; 1690 update_cr6(db->cr6_data, ioaddr); 1691 1692 /* DM9009 Chip: Phyxcer reg18 bit12=0 */ 1693 if (db->chip_id == PCI_DM9009_ID) { 1694 phy_reg = dmfe_phy_read(db->ioaddr, 1695 db->phy_addr, 18, db->chip_id) & ~0x1000; 1696 1697 dmfe_phy_write(db->ioaddr, 1698 db->phy_addr, 18, phy_reg, db->chip_id); 1699 } 1700 1701 /* Phyxcer capability setting */ 1702 phy_reg = dmfe_phy_read(db->ioaddr, db->phy_addr, 4, db->chip_id) & ~0x01e0; 1703 1704 if (db->media_mode & DMFE_AUTO) { 1705 /* AUTO Mode */ 1706 phy_reg |= db->PHY_reg4; 1707 } else { 1708 /* Force Mode */ 1709 switch(db->media_mode) { 1710 case DMFE_10MHF: phy_reg |= 0x20; break; 1711 case DMFE_10MFD: phy_reg |= 0x40; break; 1712 case DMFE_100MHF: phy_reg |= 0x80; break; 1713 case DMFE_100MFD: phy_reg |= 0x100; break; 1714 } 1715 if (db->chip_id == PCI_DM9009_ID) phy_reg &= 0x61; 1716 } 1717 1718 /* Write new capability to Phyxcer Reg4 */ 1719 if ( !(phy_reg & 0x01e0)) { 1720 phy_reg|=db->PHY_reg4; 1721 db->media_mode|=DMFE_AUTO; 1722 } 1723 dmfe_phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id); 1724 1725 /* Restart Auto-Negotiation */ 1726 if ( db->chip_type && (db->chip_id == PCI_DM9102_ID) ) 1727 dmfe_phy_write(db->ioaddr, db->phy_addr, 0, 0x1800, db->chip_id); 1728 if ( !db->chip_type ) 1729 dmfe_phy_write(db->ioaddr, db->phy_addr, 0, 0x1200, db->chip_id); 1730 } 1731 1732 1733 /* 1734 * Process op-mode 1735 * AUTO mode : PHY controller in Auto-negotiation Mode 1736 * Force mode: PHY controller in force mode with HUB 1737 * N-way force capability with SWITCH 1738 */ 1739 1740 static void dmfe_process_mode(struct dmfe_board_info *db) 1741 { 1742 u16 phy_reg; 1743 1744 /* Full Duplex Mode Check */ 1745 if (db->op_mode & 0x4) 1746 db->cr6_data |= CR6_FDM; /* Set Full Duplex Bit */ 1747 else 1748 db->cr6_data &= ~CR6_FDM; /* Clear Full Duplex Bit */ 1749 1750 /* Transciver Selection */ 1751 if (db->op_mode & 0x10) /* 1M HomePNA */ 1752 db->cr6_data |= 0x40000;/* External MII select */ 1753 else 1754 db->cr6_data &= ~0x40000;/* Internal 10/100 transciver */ 1755 1756 update_cr6(db->cr6_data, db->ioaddr); 1757 1758 /* 10/100M phyxcer force mode need */ 1759 if ( !(db->media_mode & 0x18)) { 1760 /* Forece Mode */ 1761 phy_reg = dmfe_phy_read(db->ioaddr, db->phy_addr, 6, db->chip_id); 1762 if ( !(phy_reg & 0x1) ) { 1763 /* parter without N-Way capability */ 1764 phy_reg = 0x0; 1765 switch(db->op_mode) { 1766 case DMFE_10MHF: phy_reg = 0x0; break; 1767 case DMFE_10MFD: phy_reg = 0x100; break; 1768 case DMFE_100MHF: phy_reg = 0x2000; break; 1769 case DMFE_100MFD: phy_reg = 0x2100; break; 1770 } 1771 dmfe_phy_write(db->ioaddr, 1772 db->phy_addr, 0, phy_reg, db->chip_id); 1773 if ( db->chip_type && (db->chip_id == PCI_DM9102_ID) ) 1774 mdelay(20); 1775 dmfe_phy_write(db->ioaddr, 1776 db->phy_addr, 0, phy_reg, db->chip_id); 1777 } 1778 } 1779 } 1780 1781 1782 /* 1783 * Write a word to Phy register 1784 */ 1785 1786 static void dmfe_phy_write(void __iomem *ioaddr, u8 phy_addr, u8 offset, 1787 u16 phy_data, u32 chip_id) 1788 { 1789 u16 i; 1790 1791 if (chip_id == PCI_DM9132_ID) { 1792 dw16(0x80 + offset * 4, phy_data); 1793 } else { 1794 /* DM9102/DM9102A Chip */ 1795 1796 /* Send 33 synchronization clock to Phy controller */ 1797 for (i = 0; i < 35; i++) 1798 dmfe_phy_write_1bit(ioaddr, PHY_DATA_1); 1799 1800 /* Send start command(01) to Phy */ 1801 dmfe_phy_write_1bit(ioaddr, PHY_DATA_0); 1802 dmfe_phy_write_1bit(ioaddr, PHY_DATA_1); 1803 1804 /* Send write command(01) to Phy */ 1805 dmfe_phy_write_1bit(ioaddr, PHY_DATA_0); 1806 dmfe_phy_write_1bit(ioaddr, PHY_DATA_1); 1807 1808 /* Send Phy address */ 1809 for (i = 0x10; i > 0; i = i >> 1) 1810 dmfe_phy_write_1bit(ioaddr, 1811 phy_addr & i ? PHY_DATA_1 : PHY_DATA_0); 1812 1813 /* Send register address */ 1814 for (i = 0x10; i > 0; i = i >> 1) 1815 dmfe_phy_write_1bit(ioaddr, 1816 offset & i ? PHY_DATA_1 : PHY_DATA_0); 1817 1818 /* written trasnition */ 1819 dmfe_phy_write_1bit(ioaddr, PHY_DATA_1); 1820 dmfe_phy_write_1bit(ioaddr, PHY_DATA_0); 1821 1822 /* Write a word data to PHY controller */ 1823 for ( i = 0x8000; i > 0; i >>= 1) 1824 dmfe_phy_write_1bit(ioaddr, 1825 phy_data & i ? PHY_DATA_1 : PHY_DATA_0); 1826 } 1827 } 1828 1829 1830 /* 1831 * Read a word data from phy register 1832 */ 1833 1834 static u16 dmfe_phy_read(void __iomem *ioaddr, u8 phy_addr, u8 offset, u32 chip_id) 1835 { 1836 int i; 1837 u16 phy_data; 1838 1839 if (chip_id == PCI_DM9132_ID) { 1840 /* DM9132 Chip */ 1841 phy_data = dr16(0x80 + offset * 4); 1842 } else { 1843 /* DM9102/DM9102A Chip */ 1844 1845 /* Send 33 synchronization clock to Phy controller */ 1846 for (i = 0; i < 35; i++) 1847 dmfe_phy_write_1bit(ioaddr, PHY_DATA_1); 1848 1849 /* Send start command(01) to Phy */ 1850 dmfe_phy_write_1bit(ioaddr, PHY_DATA_0); 1851 dmfe_phy_write_1bit(ioaddr, PHY_DATA_1); 1852 1853 /* Send read command(10) to Phy */ 1854 dmfe_phy_write_1bit(ioaddr, PHY_DATA_1); 1855 dmfe_phy_write_1bit(ioaddr, PHY_DATA_0); 1856 1857 /* Send Phy address */ 1858 for (i = 0x10; i > 0; i = i >> 1) 1859 dmfe_phy_write_1bit(ioaddr, 1860 phy_addr & i ? PHY_DATA_1 : PHY_DATA_0); 1861 1862 /* Send register address */ 1863 for (i = 0x10; i > 0; i = i >> 1) 1864 dmfe_phy_write_1bit(ioaddr, 1865 offset & i ? PHY_DATA_1 : PHY_DATA_0); 1866 1867 /* Skip transition state */ 1868 dmfe_phy_read_1bit(ioaddr); 1869 1870 /* read 16bit data */ 1871 for (phy_data = 0, i = 0; i < 16; i++) { 1872 phy_data <<= 1; 1873 phy_data |= dmfe_phy_read_1bit(ioaddr); 1874 } 1875 } 1876 1877 return phy_data; 1878 } 1879 1880 1881 /* 1882 * Write one bit data to Phy Controller 1883 */ 1884 1885 static void dmfe_phy_write_1bit(void __iomem *ioaddr, u32 phy_data) 1886 { 1887 dw32(DCR9, phy_data); /* MII Clock Low */ 1888 udelay(1); 1889 dw32(DCR9, phy_data | MDCLKH); /* MII Clock High */ 1890 udelay(1); 1891 dw32(DCR9, phy_data); /* MII Clock Low */ 1892 udelay(1); 1893 } 1894 1895 1896 /* 1897 * Read one bit phy data from PHY controller 1898 */ 1899 1900 static u16 dmfe_phy_read_1bit(void __iomem *ioaddr) 1901 { 1902 u16 phy_data; 1903 1904 dw32(DCR9, 0x50000); 1905 udelay(1); 1906 phy_data = (dr32(DCR9) >> 19) & 0x1; 1907 dw32(DCR9, 0x40000); 1908 udelay(1); 1909 1910 return phy_data; 1911 } 1912 1913 1914 /* 1915 * Parser SROM and media mode 1916 */ 1917 1918 static void dmfe_parse_srom(struct dmfe_board_info * db) 1919 { 1920 char * srom = db->srom; 1921 int dmfe_mode, tmp_reg; 1922 1923 DMFE_DBUG(0, "dmfe_parse_srom() ", 0); 1924 1925 /* Init CR15 */ 1926 db->cr15_data = CR15_DEFAULT; 1927 1928 /* Check SROM Version */ 1929 if ( ( (int) srom[18] & 0xff) == SROM_V41_CODE) { 1930 /* SROM V4.01 */ 1931 /* Get NIC support media mode */ 1932 db->NIC_capability = le16_to_cpup((__le16 *) (srom + 34)); 1933 db->PHY_reg4 = 0; 1934 for (tmp_reg = 1; tmp_reg < 0x10; tmp_reg <<= 1) { 1935 switch( db->NIC_capability & tmp_reg ) { 1936 case 0x1: db->PHY_reg4 |= 0x0020; break; 1937 case 0x2: db->PHY_reg4 |= 0x0040; break; 1938 case 0x4: db->PHY_reg4 |= 0x0080; break; 1939 case 0x8: db->PHY_reg4 |= 0x0100; break; 1940 } 1941 } 1942 1943 /* Media Mode Force or not check */ 1944 dmfe_mode = (le32_to_cpup((__le32 *) (srom + 34)) & 1945 le32_to_cpup((__le32 *) (srom + 36))); 1946 switch(dmfe_mode) { 1947 case 0x4: dmfe_media_mode = DMFE_100MHF; break; /* 100MHF */ 1948 case 0x2: dmfe_media_mode = DMFE_10MFD; break; /* 10MFD */ 1949 case 0x8: dmfe_media_mode = DMFE_100MFD; break; /* 100MFD */ 1950 case 0x100: 1951 case 0x200: dmfe_media_mode = DMFE_1M_HPNA; break;/* HomePNA */ 1952 } 1953 1954 /* Special Function setting */ 1955 /* VLAN function */ 1956 if ( (SF_mode & 0x1) || (srom[43] & 0x80) ) 1957 db->cr15_data |= 0x40; 1958 1959 /* Flow Control */ 1960 if ( (SF_mode & 0x2) || (srom[40] & 0x1) ) 1961 db->cr15_data |= 0x400; 1962 1963 /* TX pause packet */ 1964 if ( (SF_mode & 0x4) || (srom[40] & 0xe) ) 1965 db->cr15_data |= 0x9800; 1966 } 1967 1968 /* Parse HPNA parameter */ 1969 db->HPNA_command = 1; 1970 1971 /* Accept remote command or not */ 1972 if (HPNA_rx_cmd == 0) 1973 db->HPNA_command |= 0x8000; 1974 1975 /* Issue remote command & operation mode */ 1976 if (HPNA_tx_cmd == 1) 1977 switch(HPNA_mode) { /* Issue Remote Command */ 1978 case 0: db->HPNA_command |= 0x0904; break; 1979 case 1: db->HPNA_command |= 0x0a00; break; 1980 case 2: db->HPNA_command |= 0x0506; break; 1981 case 3: db->HPNA_command |= 0x0602; break; 1982 } 1983 else 1984 switch(HPNA_mode) { /* Don't Issue */ 1985 case 0: db->HPNA_command |= 0x0004; break; 1986 case 1: db->HPNA_command |= 0x0000; break; 1987 case 2: db->HPNA_command |= 0x0006; break; 1988 case 3: db->HPNA_command |= 0x0002; break; 1989 } 1990 1991 /* Check DM9801 or DM9802 present or not */ 1992 db->HPNA_present = 0; 1993 update_cr6(db->cr6_data | 0x40000, db->ioaddr); 1994 tmp_reg = dmfe_phy_read(db->ioaddr, db->phy_addr, 3, db->chip_id); 1995 if ( ( tmp_reg & 0xfff0 ) == 0xb900 ) { 1996 /* DM9801 or DM9802 present */ 1997 db->HPNA_timer = 8; 1998 if ( dmfe_phy_read(db->ioaddr, db->phy_addr, 31, db->chip_id) == 0x4404) { 1999 /* DM9801 HomeRun */ 2000 db->HPNA_present = 1; 2001 dmfe_program_DM9801(db, tmp_reg); 2002 } else { 2003 /* DM9802 LongRun */ 2004 db->HPNA_present = 2; 2005 dmfe_program_DM9802(db); 2006 } 2007 } 2008 2009 } 2010 2011 2012 /* 2013 * Init HomeRun DM9801 2014 */ 2015 2016 static void dmfe_program_DM9801(struct dmfe_board_info * db, int HPNA_rev) 2017 { 2018 uint reg17, reg25; 2019 2020 if ( !HPNA_NoiseFloor ) HPNA_NoiseFloor = DM9801_NOISE_FLOOR; 2021 switch(HPNA_rev) { 2022 case 0xb900: /* DM9801 E3 */ 2023 db->HPNA_command |= 0x1000; 2024 reg25 = dmfe_phy_read(db->ioaddr, db->phy_addr, 24, db->chip_id); 2025 reg25 = ( (reg25 + HPNA_NoiseFloor) & 0xff) | 0xf000; 2026 reg17 = dmfe_phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id); 2027 break; 2028 case 0xb901: /* DM9801 E4 */ 2029 reg25 = dmfe_phy_read(db->ioaddr, db->phy_addr, 25, db->chip_id); 2030 reg25 = (reg25 & 0xff00) + HPNA_NoiseFloor; 2031 reg17 = dmfe_phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id); 2032 reg17 = (reg17 & 0xfff0) + HPNA_NoiseFloor + 3; 2033 break; 2034 case 0xb902: /* DM9801 E5 */ 2035 case 0xb903: /* DM9801 E6 */ 2036 default: 2037 db->HPNA_command |= 0x1000; 2038 reg25 = dmfe_phy_read(db->ioaddr, db->phy_addr, 25, db->chip_id); 2039 reg25 = (reg25 & 0xff00) + HPNA_NoiseFloor - 5; 2040 reg17 = dmfe_phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id); 2041 reg17 = (reg17 & 0xfff0) + HPNA_NoiseFloor; 2042 break; 2043 } 2044 dmfe_phy_write(db->ioaddr, db->phy_addr, 16, db->HPNA_command, db->chip_id); 2045 dmfe_phy_write(db->ioaddr, db->phy_addr, 17, reg17, db->chip_id); 2046 dmfe_phy_write(db->ioaddr, db->phy_addr, 25, reg25, db->chip_id); 2047 } 2048 2049 2050 /* 2051 * Init HomeRun DM9802 2052 */ 2053 2054 static void dmfe_program_DM9802(struct dmfe_board_info * db) 2055 { 2056 uint phy_reg; 2057 2058 if ( !HPNA_NoiseFloor ) HPNA_NoiseFloor = DM9802_NOISE_FLOOR; 2059 dmfe_phy_write(db->ioaddr, db->phy_addr, 16, db->HPNA_command, db->chip_id); 2060 phy_reg = dmfe_phy_read(db->ioaddr, db->phy_addr, 25, db->chip_id); 2061 phy_reg = ( phy_reg & 0xff00) + HPNA_NoiseFloor; 2062 dmfe_phy_write(db->ioaddr, db->phy_addr, 25, phy_reg, db->chip_id); 2063 } 2064 2065 2066 /* 2067 * Check remote HPNA power and speed status. If not correct, 2068 * issue command again. 2069 */ 2070 2071 static void dmfe_HPNA_remote_cmd_chk(struct dmfe_board_info * db) 2072 { 2073 uint phy_reg; 2074 2075 /* Got remote device status */ 2076 phy_reg = dmfe_phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id) & 0x60; 2077 switch(phy_reg) { 2078 case 0x00: phy_reg = 0x0a00;break; /* LP/LS */ 2079 case 0x20: phy_reg = 0x0900;break; /* LP/HS */ 2080 case 0x40: phy_reg = 0x0600;break; /* HP/LS */ 2081 case 0x60: phy_reg = 0x0500;break; /* HP/HS */ 2082 } 2083 2084 /* Check remote device status match our setting ot not */ 2085 if ( phy_reg != (db->HPNA_command & 0x0f00) ) { 2086 dmfe_phy_write(db->ioaddr, db->phy_addr, 16, db->HPNA_command, 2087 db->chip_id); 2088 db->HPNA_timer=8; 2089 } else 2090 db->HPNA_timer=600; /* Match, every 10 minutes, check */ 2091 } 2092 2093 2094 2095 static const struct pci_device_id dmfe_pci_tbl[] = { 2096 { 0x1282, 0x9132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9132_ID }, 2097 { 0x1282, 0x9102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9102_ID }, 2098 { 0x1282, 0x9100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9100_ID }, 2099 { 0x1282, 0x9009, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9009_ID }, 2100 { 0, } 2101 }; 2102 MODULE_DEVICE_TABLE(pci, dmfe_pci_tbl); 2103 2104 2105 #ifdef CONFIG_PM 2106 static int dmfe_suspend(struct pci_dev *pci_dev, pm_message_t state) 2107 { 2108 struct net_device *dev = pci_get_drvdata(pci_dev); 2109 struct dmfe_board_info *db = netdev_priv(dev); 2110 void __iomem *ioaddr = db->ioaddr; 2111 u32 tmp; 2112 2113 /* Disable upper layer interface */ 2114 netif_device_detach(dev); 2115 2116 /* Disable Tx/Rx */ 2117 db->cr6_data &= ~(CR6_RXSC | CR6_TXSC); 2118 update_cr6(db->cr6_data, ioaddr); 2119 2120 /* Disable Interrupt */ 2121 dw32(DCR7, 0); 2122 dw32(DCR5, dr32(DCR5)); 2123 2124 /* Fre RX buffers */ 2125 dmfe_free_rxbuffer(db); 2126 2127 /* Enable WOL */ 2128 pci_read_config_dword(pci_dev, 0x40, &tmp); 2129 tmp &= ~(DMFE_WOL_LINKCHANGE|DMFE_WOL_MAGICPACKET); 2130 2131 if (db->wol_mode & WAKE_PHY) 2132 tmp |= DMFE_WOL_LINKCHANGE; 2133 if (db->wol_mode & WAKE_MAGIC) 2134 tmp |= DMFE_WOL_MAGICPACKET; 2135 2136 pci_write_config_dword(pci_dev, 0x40, tmp); 2137 2138 pci_enable_wake(pci_dev, PCI_D3hot, 1); 2139 pci_enable_wake(pci_dev, PCI_D3cold, 1); 2140 2141 /* Power down device*/ 2142 pci_save_state(pci_dev); 2143 pci_set_power_state(pci_dev, pci_choose_state (pci_dev, state)); 2144 2145 return 0; 2146 } 2147 2148 static int dmfe_resume(struct pci_dev *pci_dev) 2149 { 2150 struct net_device *dev = pci_get_drvdata(pci_dev); 2151 u32 tmp; 2152 2153 pci_set_power_state(pci_dev, PCI_D0); 2154 pci_restore_state(pci_dev); 2155 2156 /* Re-initialize DM910X board */ 2157 dmfe_init_dm910x(dev); 2158 2159 /* Disable WOL */ 2160 pci_read_config_dword(pci_dev, 0x40, &tmp); 2161 2162 tmp &= ~(DMFE_WOL_LINKCHANGE | DMFE_WOL_MAGICPACKET); 2163 pci_write_config_dword(pci_dev, 0x40, tmp); 2164 2165 pci_enable_wake(pci_dev, PCI_D3hot, 0); 2166 pci_enable_wake(pci_dev, PCI_D3cold, 0); 2167 2168 /* Restart upper layer interface */ 2169 netif_device_attach(dev); 2170 2171 return 0; 2172 } 2173 #else 2174 #define dmfe_suspend NULL 2175 #define dmfe_resume NULL 2176 #endif 2177 2178 static struct pci_driver dmfe_driver = { 2179 .name = "dmfe", 2180 .id_table = dmfe_pci_tbl, 2181 .probe = dmfe_init_one, 2182 .remove = dmfe_remove_one, 2183 .suspend = dmfe_suspend, 2184 .resume = dmfe_resume 2185 }; 2186 2187 MODULE_AUTHOR("Sten Wang, sten_wang@davicom.com.tw"); 2188 MODULE_DESCRIPTION("Davicom DM910X fast ethernet driver"); 2189 MODULE_LICENSE("GPL"); 2190 MODULE_VERSION(DRV_VERSION); 2191 2192 module_param(debug, int, 0); 2193 module_param(mode, byte, 0); 2194 module_param(cr6set, int, 0); 2195 module_param(chkmode, byte, 0); 2196 module_param(HPNA_mode, byte, 0); 2197 module_param(HPNA_rx_cmd, byte, 0); 2198 module_param(HPNA_tx_cmd, byte, 0); 2199 module_param(HPNA_NoiseFloor, byte, 0); 2200 module_param(SF_mode, byte, 0); 2201 MODULE_PARM_DESC(debug, "Davicom DM9xxx enable debugging (0-1)"); 2202 MODULE_PARM_DESC(mode, "Davicom DM9xxx: " 2203 "Bit 0: 10/100Mbps, bit 2: duplex, bit 8: HomePNA"); 2204 2205 MODULE_PARM_DESC(SF_mode, "Davicom DM9xxx special function " 2206 "(bit 0: VLAN, bit 1 Flow Control, bit 2: TX pause packet)"); 2207 2208 /* Description: 2209 * when user used insmod to add module, system invoked init_module() 2210 * to initialize and register. 2211 */ 2212 2213 static int __init dmfe_init_module(void) 2214 { 2215 int rc; 2216 2217 pr_info("%s\n", version); 2218 printed_version = 1; 2219 2220 DMFE_DBUG(0, "init_module() ", debug); 2221 2222 if (debug) 2223 dmfe_debug = debug; /* set debug flag */ 2224 if (cr6set) 2225 dmfe_cr6_user_set = cr6set; 2226 2227 switch(mode) { 2228 case DMFE_10MHF: 2229 case DMFE_100MHF: 2230 case DMFE_10MFD: 2231 case DMFE_100MFD: 2232 case DMFE_1M_HPNA: 2233 dmfe_media_mode = mode; 2234 break; 2235 default:dmfe_media_mode = DMFE_AUTO; 2236 break; 2237 } 2238 2239 if (HPNA_mode > 4) 2240 HPNA_mode = 0; /* Default: LP/HS */ 2241 if (HPNA_rx_cmd > 1) 2242 HPNA_rx_cmd = 0; /* Default: Ignored remote cmd */ 2243 if (HPNA_tx_cmd > 1) 2244 HPNA_tx_cmd = 0; /* Default: Don't issue remote cmd */ 2245 if (HPNA_NoiseFloor > 15) 2246 HPNA_NoiseFloor = 0; 2247 2248 rc = pci_register_driver(&dmfe_driver); 2249 if (rc < 0) 2250 return rc; 2251 2252 return 0; 2253 } 2254 2255 2256 /* 2257 * Description: 2258 * when user used rmmod to delete module, system invoked clean_module() 2259 * to un-register all registered services. 2260 */ 2261 2262 static void __exit dmfe_cleanup_module(void) 2263 { 2264 DMFE_DBUG(0, "dmfe_cleanup_module() ", debug); 2265 pci_unregister_driver(&dmfe_driver); 2266 } 2267 2268 module_init(dmfe_init_module); 2269 module_exit(dmfe_cleanup_module); 2270