1 /* 2 A Davicom DM9102/DM9102A/DM9102A+DM9801/DM9102A+DM9802 NIC fast 3 ethernet driver for Linux. 4 Copyright (C) 1997 Sten Wang 5 6 This program is free software; you can redistribute it and/or 7 modify it under the terms of the GNU General Public License 8 as published by the Free Software Foundation; either version 2 9 of the License, or (at your option) any later version. 10 11 This program is distributed in the hope that it will be useful, 12 but WITHOUT ANY WARRANTY; without even the implied warranty of 13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 14 GNU General Public License for more details. 15 16 DAVICOM Web-Site: www.davicom.com.tw 17 18 Author: Sten Wang, 886-3-5798797-8517, E-mail: sten_wang@davicom.com.tw 19 Maintainer: Tobias Ringstrom <tori@unhappy.mine.nu> 20 21 (C)Copyright 1997-1998 DAVICOM Semiconductor,Inc. All Rights Reserved. 22 23 Marcelo Tosatti <marcelo@conectiva.com.br> : 24 Made it compile in 2.3 (device to net_device) 25 26 Alan Cox <alan@lxorguk.ukuu.org.uk> : 27 Cleaned up for kernel merge. 28 Removed the back compatibility support 29 Reformatted, fixing spelling etc as I went 30 Removed IRQ 0-15 assumption 31 32 Jeff Garzik <jgarzik@pobox.com> : 33 Updated to use new PCI driver API. 34 Resource usage cleanups. 35 Report driver version to user. 36 37 Tobias Ringstrom <tori@unhappy.mine.nu> : 38 Cleaned up and added SMP safety. Thanks go to Jeff Garzik, 39 Andrew Morton and Frank Davis for the SMP safety fixes. 40 41 Vojtech Pavlik <vojtech@suse.cz> : 42 Cleaned up pointer arithmetics. 43 Fixed a lot of 64bit issues. 44 Cleaned up printk()s a bit. 45 Fixed some obvious big endian problems. 46 47 Tobias Ringstrom <tori@unhappy.mine.nu> : 48 Use time_after for jiffies calculation. Added ethtool 49 support. Updated PCI resource allocation. Do not 50 forget to unmap PCI mapped skbs. 51 52 Alan Cox <alan@lxorguk.ukuu.org.uk> 53 Added new PCI identifiers provided by Clear Zhang at ALi 54 for their 1563 ethernet device. 55 56 TODO 57 58 Check on 64 bit boxes. 59 Check and fix on big endian boxes. 60 61 Test and make sure PCI latency is now correct for all cases. 62 */ 63 64 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 65 66 #define DRV_NAME "dmfe" 67 #define DRV_VERSION "1.36.4" 68 #define DRV_RELDATE "2002-01-17" 69 70 #include <linux/module.h> 71 #include <linux/kernel.h> 72 #include <linux/string.h> 73 #include <linux/timer.h> 74 #include <linux/ptrace.h> 75 #include <linux/errno.h> 76 #include <linux/ioport.h> 77 #include <linux/interrupt.h> 78 #include <linux/pci.h> 79 #include <linux/dma-mapping.h> 80 #include <linux/init.h> 81 #include <linux/netdevice.h> 82 #include <linux/etherdevice.h> 83 #include <linux/ethtool.h> 84 #include <linux/skbuff.h> 85 #include <linux/delay.h> 86 #include <linux/spinlock.h> 87 #include <linux/crc32.h> 88 #include <linux/bitops.h> 89 90 #include <asm/processor.h> 91 #include <asm/io.h> 92 #include <asm/dma.h> 93 #include <asm/uaccess.h> 94 #include <asm/irq.h> 95 96 #ifdef CONFIG_TULIP_DM910X 97 #include <linux/of.h> 98 #endif 99 100 101 /* Board/System/Debug information/definition ---------------- */ 102 #define PCI_DM9132_ID 0x91321282 /* Davicom DM9132 ID */ 103 #define PCI_DM9102_ID 0x91021282 /* Davicom DM9102 ID */ 104 #define PCI_DM9100_ID 0x91001282 /* Davicom DM9100 ID */ 105 #define PCI_DM9009_ID 0x90091282 /* Davicom DM9009 ID */ 106 107 #define DM9102_IO_SIZE 0x80 108 #define DM9102A_IO_SIZE 0x100 109 #define TX_MAX_SEND_CNT 0x1 /* Maximum tx packet per time */ 110 #define TX_DESC_CNT 0x10 /* Allocated Tx descriptors */ 111 #define RX_DESC_CNT 0x20 /* Allocated Rx descriptors */ 112 #define TX_FREE_DESC_CNT (TX_DESC_CNT - 2) /* Max TX packet count */ 113 #define TX_WAKE_DESC_CNT (TX_DESC_CNT - 3) /* TX wakeup count */ 114 #define DESC_ALL_CNT (TX_DESC_CNT + RX_DESC_CNT) 115 #define TX_BUF_ALLOC 0x600 116 #define RX_ALLOC_SIZE 0x620 117 #define DM910X_RESET 1 118 #define CR0_DEFAULT 0x00E00000 /* TX & RX burst mode */ 119 #define CR6_DEFAULT 0x00080000 /* HD */ 120 #define CR7_DEFAULT 0x180c1 121 #define CR15_DEFAULT 0x06 /* TxJabber RxWatchdog */ 122 #define TDES0_ERR_MASK 0x4302 /* TXJT, LC, EC, FUE */ 123 #define MAX_PACKET_SIZE 1514 124 #define DMFE_MAX_MULTICAST 14 125 #define RX_COPY_SIZE 100 126 #define MAX_CHECK_PACKET 0x8000 127 #define DM9801_NOISE_FLOOR 8 128 #define DM9802_NOISE_FLOOR 5 129 130 #define DMFE_WOL_LINKCHANGE 0x20000000 131 #define DMFE_WOL_SAMPLEPACKET 0x10000000 132 #define DMFE_WOL_MAGICPACKET 0x08000000 133 134 135 #define DMFE_10MHF 0 136 #define DMFE_100MHF 1 137 #define DMFE_10MFD 4 138 #define DMFE_100MFD 5 139 #define DMFE_AUTO 8 140 #define DMFE_1M_HPNA 0x10 141 142 #define DMFE_TXTH_72 0x400000 /* TX TH 72 byte */ 143 #define DMFE_TXTH_96 0x404000 /* TX TH 96 byte */ 144 #define DMFE_TXTH_128 0x0000 /* TX TH 128 byte */ 145 #define DMFE_TXTH_256 0x4000 /* TX TH 256 byte */ 146 #define DMFE_TXTH_512 0x8000 /* TX TH 512 byte */ 147 #define DMFE_TXTH_1K 0xC000 /* TX TH 1K byte */ 148 149 #define DMFE_TIMER_WUT (jiffies + HZ * 1)/* timer wakeup time : 1 second */ 150 #define DMFE_TX_TIMEOUT ((3*HZ)/2) /* tx packet time-out time 1.5 s" */ 151 #define DMFE_TX_KICK (HZ/2) /* tx packet Kick-out time 0.5 s" */ 152 153 #define dw32(reg, val) iowrite32(val, ioaddr + (reg)) 154 #define dw16(reg, val) iowrite16(val, ioaddr + (reg)) 155 #define dr32(reg) ioread32(ioaddr + (reg)) 156 #define dr16(reg) ioread16(ioaddr + (reg)) 157 #define dr8(reg) ioread8(ioaddr + (reg)) 158 159 #define DMFE_DBUG(dbug_now, msg, value) \ 160 do { \ 161 if (dmfe_debug || (dbug_now)) \ 162 pr_err("%s %lx\n", \ 163 (msg), (long) (value)); \ 164 } while (0) 165 166 #define SHOW_MEDIA_TYPE(mode) \ 167 pr_info("Change Speed to %sMhz %s duplex\n" , \ 168 (mode & 1) ? "100":"10", \ 169 (mode & 4) ? "full":"half"); 170 171 172 /* CR9 definition: SROM/MII */ 173 #define CR9_SROM_READ 0x4800 174 #define CR9_SRCS 0x1 175 #define CR9_SRCLK 0x2 176 #define CR9_CRDOUT 0x8 177 #define SROM_DATA_0 0x0 178 #define SROM_DATA_1 0x4 179 #define PHY_DATA_1 0x20000 180 #define PHY_DATA_0 0x00000 181 #define MDCLKH 0x10000 182 183 #define PHY_POWER_DOWN 0x800 184 185 #define SROM_V41_CODE 0x14 186 187 #define __CHK_IO_SIZE(pci_id, dev_rev) \ 188 (( ((pci_id)==PCI_DM9132_ID) || ((dev_rev) >= 0x30) ) ? \ 189 DM9102A_IO_SIZE: DM9102_IO_SIZE) 190 191 #define CHK_IO_SIZE(pci_dev) \ 192 (__CHK_IO_SIZE(((pci_dev)->device << 16) | (pci_dev)->vendor, \ 193 (pci_dev)->revision)) 194 195 /* Sten Check */ 196 #define DEVICE net_device 197 198 /* Structure/enum declaration ------------------------------- */ 199 struct tx_desc { 200 __le32 tdes0, tdes1, tdes2, tdes3; /* Data for the card */ 201 char *tx_buf_ptr; /* Data for us */ 202 struct tx_desc *next_tx_desc; 203 } __attribute__(( aligned(32) )); 204 205 struct rx_desc { 206 __le32 rdes0, rdes1, rdes2, rdes3; /* Data for the card */ 207 struct sk_buff *rx_skb_ptr; /* Data for us */ 208 struct rx_desc *next_rx_desc; 209 } __attribute__(( aligned(32) )); 210 211 struct dmfe_board_info { 212 u32 chip_id; /* Chip vendor/Device ID */ 213 u8 chip_revision; /* Chip revision */ 214 struct net_device *next_dev; /* next device */ 215 struct pci_dev *pdev; /* PCI device */ 216 spinlock_t lock; 217 218 void __iomem *ioaddr; /* I/O base address */ 219 u32 cr0_data; 220 u32 cr5_data; 221 u32 cr6_data; 222 u32 cr7_data; 223 u32 cr15_data; 224 225 /* pointer for memory physical address */ 226 dma_addr_t buf_pool_dma_ptr; /* Tx buffer pool memory */ 227 dma_addr_t buf_pool_dma_start; /* Tx buffer pool align dword */ 228 dma_addr_t desc_pool_dma_ptr; /* descriptor pool memory */ 229 dma_addr_t first_tx_desc_dma; 230 dma_addr_t first_rx_desc_dma; 231 232 /* descriptor pointer */ 233 unsigned char *buf_pool_ptr; /* Tx buffer pool memory */ 234 unsigned char *buf_pool_start; /* Tx buffer pool align dword */ 235 unsigned char *desc_pool_ptr; /* descriptor pool memory */ 236 struct tx_desc *first_tx_desc; 237 struct tx_desc *tx_insert_ptr; 238 struct tx_desc *tx_remove_ptr; 239 struct rx_desc *first_rx_desc; 240 struct rx_desc *rx_insert_ptr; 241 struct rx_desc *rx_ready_ptr; /* packet come pointer */ 242 unsigned long tx_packet_cnt; /* transmitted packet count */ 243 unsigned long tx_queue_cnt; /* wait to send packet count */ 244 unsigned long rx_avail_cnt; /* available rx descriptor count */ 245 unsigned long interval_rx_cnt; /* rx packet count a callback time */ 246 247 u16 HPNA_command; /* For HPNA register 16 */ 248 u16 HPNA_timer; /* For HPNA remote device check */ 249 u16 dbug_cnt; 250 u16 NIC_capability; /* NIC media capability */ 251 u16 PHY_reg4; /* Saved Phyxcer register 4 value */ 252 253 u8 HPNA_present; /* 0:none, 1:DM9801, 2:DM9802 */ 254 u8 chip_type; /* Keep DM9102A chip type */ 255 u8 media_mode; /* user specify media mode */ 256 u8 op_mode; /* real work media mode */ 257 u8 phy_addr; 258 u8 wait_reset; /* Hardware failed, need to reset */ 259 u8 dm910x_chk_mode; /* Operating mode check */ 260 u8 first_in_callback; /* Flag to record state */ 261 u8 wol_mode; /* user WOL settings */ 262 struct timer_list timer; 263 264 /* Driver defined statistic counter */ 265 unsigned long tx_fifo_underrun; 266 unsigned long tx_loss_carrier; 267 unsigned long tx_no_carrier; 268 unsigned long tx_late_collision; 269 unsigned long tx_excessive_collision; 270 unsigned long tx_jabber_timeout; 271 unsigned long reset_count; 272 unsigned long reset_cr8; 273 unsigned long reset_fatal; 274 unsigned long reset_TXtimeout; 275 276 /* NIC SROM data */ 277 unsigned char srom[128]; 278 }; 279 280 enum dmfe_offsets { 281 DCR0 = 0x00, DCR1 = 0x08, DCR2 = 0x10, DCR3 = 0x18, DCR4 = 0x20, 282 DCR5 = 0x28, DCR6 = 0x30, DCR7 = 0x38, DCR8 = 0x40, DCR9 = 0x48, 283 DCR10 = 0x50, DCR11 = 0x58, DCR12 = 0x60, DCR13 = 0x68, DCR14 = 0x70, 284 DCR15 = 0x78 285 }; 286 287 enum dmfe_CR6_bits { 288 CR6_RXSC = 0x2, CR6_PBF = 0x8, CR6_PM = 0x40, CR6_PAM = 0x80, 289 CR6_FDM = 0x200, CR6_TXSC = 0x2000, CR6_STI = 0x100000, 290 CR6_SFT = 0x200000, CR6_RXA = 0x40000000, CR6_NO_PURGE = 0x20000000 291 }; 292 293 /* Global variable declaration ----------------------------- */ 294 static int printed_version; 295 static const char version[] = 296 "Davicom DM9xxx net driver, version " DRV_VERSION " (" DRV_RELDATE ")"; 297 298 static int dmfe_debug; 299 static unsigned char dmfe_media_mode = DMFE_AUTO; 300 static u32 dmfe_cr6_user_set; 301 302 /* For module input parameter */ 303 static int debug; 304 static u32 cr6set; 305 static unsigned char mode = 8; 306 static u8 chkmode = 1; 307 static u8 HPNA_mode; /* Default: Low Power/High Speed */ 308 static u8 HPNA_rx_cmd; /* Default: Disable Rx remote command */ 309 static u8 HPNA_tx_cmd; /* Default: Don't issue remote command */ 310 static u8 HPNA_NoiseFloor; /* Default: HPNA NoiseFloor */ 311 static u8 SF_mode; /* Special Function: 1:VLAN, 2:RX Flow Control 312 4: TX pause packet */ 313 314 315 /* function declaration ------------------------------------- */ 316 static int dmfe_open(struct DEVICE *); 317 static netdev_tx_t dmfe_start_xmit(struct sk_buff *, struct DEVICE *); 318 static int dmfe_stop(struct DEVICE *); 319 static void dmfe_set_filter_mode(struct DEVICE *); 320 static const struct ethtool_ops netdev_ethtool_ops; 321 static u16 read_srom_word(void __iomem *, int); 322 static irqreturn_t dmfe_interrupt(int , void *); 323 #ifdef CONFIG_NET_POLL_CONTROLLER 324 static void poll_dmfe (struct net_device *dev); 325 #endif 326 static void dmfe_descriptor_init(struct net_device *); 327 static void allocate_rx_buffer(struct net_device *); 328 static void update_cr6(u32, void __iomem *); 329 static void send_filter_frame(struct DEVICE *); 330 static void dm9132_id_table(struct DEVICE *); 331 static u16 dmfe_phy_read(void __iomem *, u8, u8, u32); 332 static void dmfe_phy_write(void __iomem *, u8, u8, u16, u32); 333 static void dmfe_phy_write_1bit(void __iomem *, u32); 334 static u16 dmfe_phy_read_1bit(void __iomem *); 335 static u8 dmfe_sense_speed(struct dmfe_board_info *); 336 static void dmfe_process_mode(struct dmfe_board_info *); 337 static void dmfe_timer(unsigned long); 338 static inline u32 cal_CRC(unsigned char *, unsigned int, u8); 339 static void dmfe_rx_packet(struct DEVICE *, struct dmfe_board_info *); 340 static void dmfe_free_tx_pkt(struct DEVICE *, struct dmfe_board_info *); 341 static void dmfe_reuse_skb(struct dmfe_board_info *, struct sk_buff *); 342 static void dmfe_dynamic_reset(struct DEVICE *); 343 static void dmfe_free_rxbuffer(struct dmfe_board_info *); 344 static void dmfe_init_dm910x(struct DEVICE *); 345 static void dmfe_parse_srom(struct dmfe_board_info *); 346 static void dmfe_program_DM9801(struct dmfe_board_info *, int); 347 static void dmfe_program_DM9802(struct dmfe_board_info *); 348 static void dmfe_HPNA_remote_cmd_chk(struct dmfe_board_info * ); 349 static void dmfe_set_phyxcer(struct dmfe_board_info *); 350 351 /* DM910X network board routine ---------------------------- */ 352 353 static const struct net_device_ops netdev_ops = { 354 .ndo_open = dmfe_open, 355 .ndo_stop = dmfe_stop, 356 .ndo_start_xmit = dmfe_start_xmit, 357 .ndo_set_rx_mode = dmfe_set_filter_mode, 358 .ndo_change_mtu = eth_change_mtu, 359 .ndo_set_mac_address = eth_mac_addr, 360 .ndo_validate_addr = eth_validate_addr, 361 #ifdef CONFIG_NET_POLL_CONTROLLER 362 .ndo_poll_controller = poll_dmfe, 363 #endif 364 }; 365 366 /* 367 * Search DM910X board ,allocate space and register it 368 */ 369 370 static int dmfe_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) 371 { 372 struct dmfe_board_info *db; /* board information structure */ 373 struct net_device *dev; 374 u32 pci_pmr; 375 int i, err; 376 377 DMFE_DBUG(0, "dmfe_init_one()", 0); 378 379 if (!printed_version++) 380 pr_info("%s\n", version); 381 382 /* 383 * SPARC on-board DM910x chips should be handled by the main 384 * tulip driver, except for early DM9100s. 385 */ 386 #ifdef CONFIG_TULIP_DM910X 387 if ((ent->driver_data == PCI_DM9100_ID && pdev->revision >= 0x30) || 388 ent->driver_data == PCI_DM9102_ID) { 389 struct device_node *dp = pci_device_to_OF_node(pdev); 390 391 if (dp && of_get_property(dp, "local-mac-address", NULL)) { 392 pr_info("skipping on-board DM910x (use tulip)\n"); 393 return -ENODEV; 394 } 395 } 396 #endif 397 398 /* Init network device */ 399 dev = alloc_etherdev(sizeof(*db)); 400 if (dev == NULL) 401 return -ENOMEM; 402 SET_NETDEV_DEV(dev, &pdev->dev); 403 404 if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) { 405 pr_warn("32-bit PCI DMA not available\n"); 406 err = -ENODEV; 407 goto err_out_free; 408 } 409 410 /* Enable Master/IO access, Disable memory access */ 411 err = pci_enable_device(pdev); 412 if (err) 413 goto err_out_free; 414 415 if (!pci_resource_start(pdev, 0)) { 416 pr_err("I/O base is zero\n"); 417 err = -ENODEV; 418 goto err_out_disable; 419 } 420 421 if (pci_resource_len(pdev, 0) < (CHK_IO_SIZE(pdev)) ) { 422 pr_err("Allocated I/O size too small\n"); 423 err = -ENODEV; 424 goto err_out_disable; 425 } 426 427 #if 0 /* pci_{enable_device,set_master} sets minimum latency for us now */ 428 429 /* Set Latency Timer 80h */ 430 /* FIXME: setting values > 32 breaks some SiS 559x stuff. 431 Need a PCI quirk.. */ 432 433 pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x80); 434 #endif 435 436 if (pci_request_regions(pdev, DRV_NAME)) { 437 pr_err("Failed to request PCI regions\n"); 438 err = -ENODEV; 439 goto err_out_disable; 440 } 441 442 /* Init system & device */ 443 db = netdev_priv(dev); 444 445 /* Allocate Tx/Rx descriptor memory */ 446 db->desc_pool_ptr = pci_alloc_consistent(pdev, sizeof(struct tx_desc) * 447 DESC_ALL_CNT + 0x20, &db->desc_pool_dma_ptr); 448 if (!db->desc_pool_ptr) { 449 err = -ENOMEM; 450 goto err_out_res; 451 } 452 453 db->buf_pool_ptr = pci_alloc_consistent(pdev, TX_BUF_ALLOC * 454 TX_DESC_CNT + 4, &db->buf_pool_dma_ptr); 455 if (!db->buf_pool_ptr) { 456 err = -ENOMEM; 457 goto err_out_free_desc; 458 } 459 460 db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr; 461 db->first_tx_desc_dma = db->desc_pool_dma_ptr; 462 db->buf_pool_start = db->buf_pool_ptr; 463 db->buf_pool_dma_start = db->buf_pool_dma_ptr; 464 465 db->chip_id = ent->driver_data; 466 /* IO type range. */ 467 db->ioaddr = pci_iomap(pdev, 0, 0); 468 if (!db->ioaddr) { 469 err = -ENOMEM; 470 goto err_out_free_buf; 471 } 472 473 db->chip_revision = pdev->revision; 474 db->wol_mode = 0; 475 476 db->pdev = pdev; 477 478 pci_set_drvdata(pdev, dev); 479 dev->netdev_ops = &netdev_ops; 480 dev->ethtool_ops = &netdev_ethtool_ops; 481 netif_carrier_off(dev); 482 spin_lock_init(&db->lock); 483 484 pci_read_config_dword(pdev, 0x50, &pci_pmr); 485 pci_pmr &= 0x70000; 486 if ( (pci_pmr == 0x10000) && (db->chip_revision == 0x31) ) 487 db->chip_type = 1; /* DM9102A E3 */ 488 else 489 db->chip_type = 0; 490 491 /* read 64 word srom data */ 492 for (i = 0; i < 64; i++) { 493 ((__le16 *) db->srom)[i] = 494 cpu_to_le16(read_srom_word(db->ioaddr, i)); 495 } 496 497 /* Set Node address */ 498 for (i = 0; i < 6; i++) 499 dev->dev_addr[i] = db->srom[20 + i]; 500 501 err = register_netdev (dev); 502 if (err) 503 goto err_out_unmap; 504 505 dev_info(&dev->dev, "Davicom DM%04lx at pci%s, %pM, irq %d\n", 506 ent->driver_data >> 16, 507 pci_name(pdev), dev->dev_addr, pdev->irq); 508 509 pci_set_master(pdev); 510 511 return 0; 512 513 err_out_unmap: 514 pci_iounmap(pdev, db->ioaddr); 515 err_out_free_buf: 516 pci_free_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, 517 db->buf_pool_ptr, db->buf_pool_dma_ptr); 518 err_out_free_desc: 519 pci_free_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20, 520 db->desc_pool_ptr, db->desc_pool_dma_ptr); 521 err_out_res: 522 pci_release_regions(pdev); 523 err_out_disable: 524 pci_disable_device(pdev); 525 err_out_free: 526 free_netdev(dev); 527 528 return err; 529 } 530 531 532 static void dmfe_remove_one(struct pci_dev *pdev) 533 { 534 struct net_device *dev = pci_get_drvdata(pdev); 535 struct dmfe_board_info *db = netdev_priv(dev); 536 537 DMFE_DBUG(0, "dmfe_remove_one()", 0); 538 539 if (dev) { 540 541 unregister_netdev(dev); 542 pci_iounmap(db->pdev, db->ioaddr); 543 pci_free_consistent(db->pdev, sizeof(struct tx_desc) * 544 DESC_ALL_CNT + 0x20, db->desc_pool_ptr, 545 db->desc_pool_dma_ptr); 546 pci_free_consistent(db->pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, 547 db->buf_pool_ptr, db->buf_pool_dma_ptr); 548 pci_release_regions(pdev); 549 free_netdev(dev); /* free board information */ 550 } 551 552 DMFE_DBUG(0, "dmfe_remove_one() exit", 0); 553 } 554 555 556 /* 557 * Open the interface. 558 * The interface is opened whenever "ifconfig" actives it. 559 */ 560 561 static int dmfe_open(struct DEVICE *dev) 562 { 563 struct dmfe_board_info *db = netdev_priv(dev); 564 const int irq = db->pdev->irq; 565 int ret; 566 567 DMFE_DBUG(0, "dmfe_open", 0); 568 569 ret = request_irq(irq, dmfe_interrupt, IRQF_SHARED, dev->name, dev); 570 if (ret) 571 return ret; 572 573 /* system variable init */ 574 db->cr6_data = CR6_DEFAULT | dmfe_cr6_user_set; 575 db->tx_packet_cnt = 0; 576 db->tx_queue_cnt = 0; 577 db->rx_avail_cnt = 0; 578 db->wait_reset = 0; 579 580 db->first_in_callback = 0; 581 db->NIC_capability = 0xf; /* All capability*/ 582 db->PHY_reg4 = 0x1e0; 583 584 /* CR6 operation mode decision */ 585 if ( !chkmode || (db->chip_id == PCI_DM9132_ID) || 586 (db->chip_revision >= 0x30) ) { 587 db->cr6_data |= DMFE_TXTH_256; 588 db->cr0_data = CR0_DEFAULT; 589 db->dm910x_chk_mode=4; /* Enter the normal mode */ 590 } else { 591 db->cr6_data |= CR6_SFT; /* Store & Forward mode */ 592 db->cr0_data = 0; 593 db->dm910x_chk_mode = 1; /* Enter the check mode */ 594 } 595 596 /* Initialize DM910X board */ 597 dmfe_init_dm910x(dev); 598 599 /* Active System Interface */ 600 netif_wake_queue(dev); 601 602 /* set and active a timer process */ 603 init_timer(&db->timer); 604 db->timer.expires = DMFE_TIMER_WUT + HZ * 2; 605 db->timer.data = (unsigned long)dev; 606 db->timer.function = dmfe_timer; 607 add_timer(&db->timer); 608 609 return 0; 610 } 611 612 613 /* Initialize DM910X board 614 * Reset DM910X board 615 * Initialize TX/Rx descriptor chain structure 616 * Send the set-up frame 617 * Enable Tx/Rx machine 618 */ 619 620 static void dmfe_init_dm910x(struct DEVICE *dev) 621 { 622 struct dmfe_board_info *db = netdev_priv(dev); 623 void __iomem *ioaddr = db->ioaddr; 624 625 DMFE_DBUG(0, "dmfe_init_dm910x()", 0); 626 627 /* Reset DM910x MAC controller */ 628 dw32(DCR0, DM910X_RESET); /* RESET MAC */ 629 udelay(100); 630 dw32(DCR0, db->cr0_data); 631 udelay(5); 632 633 /* Phy addr : DM910(A)2/DM9132/9801, phy address = 1 */ 634 db->phy_addr = 1; 635 636 /* Parser SROM and media mode */ 637 dmfe_parse_srom(db); 638 db->media_mode = dmfe_media_mode; 639 640 /* RESET Phyxcer Chip by GPR port bit 7 */ 641 dw32(DCR12, 0x180); /* Let bit 7 output port */ 642 if (db->chip_id == PCI_DM9009_ID) { 643 dw32(DCR12, 0x80); /* Issue RESET signal */ 644 mdelay(300); /* Delay 300 ms */ 645 } 646 dw32(DCR12, 0x0); /* Clear RESET signal */ 647 648 /* Process Phyxcer Media Mode */ 649 if ( !(db->media_mode & 0x10) ) /* Force 1M mode */ 650 dmfe_set_phyxcer(db); 651 652 /* Media Mode Process */ 653 if ( !(db->media_mode & DMFE_AUTO) ) 654 db->op_mode = db->media_mode; /* Force Mode */ 655 656 /* Initialize Transmit/Receive descriptor and CR3/4 */ 657 dmfe_descriptor_init(dev); 658 659 /* Init CR6 to program DM910x operation */ 660 update_cr6(db->cr6_data, ioaddr); 661 662 /* Send setup frame */ 663 if (db->chip_id == PCI_DM9132_ID) 664 dm9132_id_table(dev); /* DM9132 */ 665 else 666 send_filter_frame(dev); /* DM9102/DM9102A */ 667 668 /* Init CR7, interrupt active bit */ 669 db->cr7_data = CR7_DEFAULT; 670 dw32(DCR7, db->cr7_data); 671 672 /* Init CR15, Tx jabber and Rx watchdog timer */ 673 dw32(DCR15, db->cr15_data); 674 675 /* Enable DM910X Tx/Rx function */ 676 db->cr6_data |= CR6_RXSC | CR6_TXSC | 0x40000; 677 update_cr6(db->cr6_data, ioaddr); 678 } 679 680 681 /* 682 * Hardware start transmission. 683 * Send a packet to media from the upper layer. 684 */ 685 686 static netdev_tx_t dmfe_start_xmit(struct sk_buff *skb, 687 struct DEVICE *dev) 688 { 689 struct dmfe_board_info *db = netdev_priv(dev); 690 void __iomem *ioaddr = db->ioaddr; 691 struct tx_desc *txptr; 692 unsigned long flags; 693 694 DMFE_DBUG(0, "dmfe_start_xmit", 0); 695 696 /* Too large packet check */ 697 if (skb->len > MAX_PACKET_SIZE) { 698 pr_err("big packet = %d\n", (u16)skb->len); 699 dev_kfree_skb_any(skb); 700 return NETDEV_TX_OK; 701 } 702 703 /* Resource flag check */ 704 netif_stop_queue(dev); 705 706 spin_lock_irqsave(&db->lock, flags); 707 708 /* No Tx resource check, it never happen nromally */ 709 if (db->tx_queue_cnt >= TX_FREE_DESC_CNT) { 710 spin_unlock_irqrestore(&db->lock, flags); 711 pr_err("No Tx resource %ld\n", db->tx_queue_cnt); 712 return NETDEV_TX_BUSY; 713 } 714 715 /* Disable NIC interrupt */ 716 dw32(DCR7, 0); 717 718 /* transmit this packet */ 719 txptr = db->tx_insert_ptr; 720 skb_copy_from_linear_data(skb, txptr->tx_buf_ptr, skb->len); 721 txptr->tdes1 = cpu_to_le32(0xe1000000 | skb->len); 722 723 /* Point to next transmit free descriptor */ 724 db->tx_insert_ptr = txptr->next_tx_desc; 725 726 /* Transmit Packet Process */ 727 if ( (!db->tx_queue_cnt) && (db->tx_packet_cnt < TX_MAX_SEND_CNT) ) { 728 txptr->tdes0 = cpu_to_le32(0x80000000); /* Set owner bit */ 729 db->tx_packet_cnt++; /* Ready to send */ 730 dw32(DCR1, 0x1); /* Issue Tx polling */ 731 dev->trans_start = jiffies; /* saved time stamp */ 732 } else { 733 db->tx_queue_cnt++; /* queue TX packet */ 734 dw32(DCR1, 0x1); /* Issue Tx polling */ 735 } 736 737 /* Tx resource check */ 738 if ( db->tx_queue_cnt < TX_FREE_DESC_CNT ) 739 netif_wake_queue(dev); 740 741 /* Restore CR7 to enable interrupt */ 742 spin_unlock_irqrestore(&db->lock, flags); 743 dw32(DCR7, db->cr7_data); 744 745 /* free this SKB */ 746 dev_consume_skb_any(skb); 747 748 return NETDEV_TX_OK; 749 } 750 751 752 /* 753 * Stop the interface. 754 * The interface is stopped when it is brought. 755 */ 756 757 static int dmfe_stop(struct DEVICE *dev) 758 { 759 struct dmfe_board_info *db = netdev_priv(dev); 760 void __iomem *ioaddr = db->ioaddr; 761 762 DMFE_DBUG(0, "dmfe_stop", 0); 763 764 /* disable system */ 765 netif_stop_queue(dev); 766 767 /* deleted timer */ 768 del_timer_sync(&db->timer); 769 770 /* Reset & stop DM910X board */ 771 dw32(DCR0, DM910X_RESET); 772 udelay(100); 773 dmfe_phy_write(ioaddr, db->phy_addr, 0, 0x8000, db->chip_id); 774 775 /* free interrupt */ 776 free_irq(db->pdev->irq, dev); 777 778 /* free allocated rx buffer */ 779 dmfe_free_rxbuffer(db); 780 781 #if 0 782 /* show statistic counter */ 783 printk("FU:%lx EC:%lx LC:%lx NC:%lx LOC:%lx TXJT:%lx RESET:%lx RCR8:%lx FAL:%lx TT:%lx\n", 784 db->tx_fifo_underrun, db->tx_excessive_collision, 785 db->tx_late_collision, db->tx_no_carrier, db->tx_loss_carrier, 786 db->tx_jabber_timeout, db->reset_count, db->reset_cr8, 787 db->reset_fatal, db->reset_TXtimeout); 788 #endif 789 790 return 0; 791 } 792 793 794 /* 795 * DM9102 insterrupt handler 796 * receive the packet to upper layer, free the transmitted packet 797 */ 798 799 static irqreturn_t dmfe_interrupt(int irq, void *dev_id) 800 { 801 struct DEVICE *dev = dev_id; 802 struct dmfe_board_info *db = netdev_priv(dev); 803 void __iomem *ioaddr = db->ioaddr; 804 unsigned long flags; 805 806 DMFE_DBUG(0, "dmfe_interrupt()", 0); 807 808 spin_lock_irqsave(&db->lock, flags); 809 810 /* Got DM910X status */ 811 db->cr5_data = dr32(DCR5); 812 dw32(DCR5, db->cr5_data); 813 if ( !(db->cr5_data & 0xc1) ) { 814 spin_unlock_irqrestore(&db->lock, flags); 815 return IRQ_HANDLED; 816 } 817 818 /* Disable all interrupt in CR7 to solve the interrupt edge problem */ 819 dw32(DCR7, 0); 820 821 /* Check system status */ 822 if (db->cr5_data & 0x2000) { 823 /* system bus error happen */ 824 DMFE_DBUG(1, "System bus error happen. CR5=", db->cr5_data); 825 db->reset_fatal++; 826 db->wait_reset = 1; /* Need to RESET */ 827 spin_unlock_irqrestore(&db->lock, flags); 828 return IRQ_HANDLED; 829 } 830 831 /* Received the coming packet */ 832 if ( (db->cr5_data & 0x40) && db->rx_avail_cnt ) 833 dmfe_rx_packet(dev, db); 834 835 /* reallocate rx descriptor buffer */ 836 if (db->rx_avail_cnt<RX_DESC_CNT) 837 allocate_rx_buffer(dev); 838 839 /* Free the transmitted descriptor */ 840 if ( db->cr5_data & 0x01) 841 dmfe_free_tx_pkt(dev, db); 842 843 /* Mode Check */ 844 if (db->dm910x_chk_mode & 0x2) { 845 db->dm910x_chk_mode = 0x4; 846 db->cr6_data |= 0x100; 847 update_cr6(db->cr6_data, ioaddr); 848 } 849 850 /* Restore CR7 to enable interrupt mask */ 851 dw32(DCR7, db->cr7_data); 852 853 spin_unlock_irqrestore(&db->lock, flags); 854 return IRQ_HANDLED; 855 } 856 857 858 #ifdef CONFIG_NET_POLL_CONTROLLER 859 /* 860 * Polling 'interrupt' - used by things like netconsole to send skbs 861 * without having to re-enable interrupts. It's not called while 862 * the interrupt routine is executing. 863 */ 864 865 static void poll_dmfe (struct net_device *dev) 866 { 867 struct dmfe_board_info *db = netdev_priv(dev); 868 const int irq = db->pdev->irq; 869 870 /* disable_irq here is not very nice, but with the lockless 871 interrupt handler we have no other choice. */ 872 disable_irq(irq); 873 dmfe_interrupt (irq, dev); 874 enable_irq(irq); 875 } 876 #endif 877 878 /* 879 * Free TX resource after TX complete 880 */ 881 882 static void dmfe_free_tx_pkt(struct DEVICE *dev, struct dmfe_board_info * db) 883 { 884 struct tx_desc *txptr; 885 void __iomem *ioaddr = db->ioaddr; 886 u32 tdes0; 887 888 txptr = db->tx_remove_ptr; 889 while(db->tx_packet_cnt) { 890 tdes0 = le32_to_cpu(txptr->tdes0); 891 if (tdes0 & 0x80000000) 892 break; 893 894 /* A packet sent completed */ 895 db->tx_packet_cnt--; 896 dev->stats.tx_packets++; 897 898 /* Transmit statistic counter */ 899 if ( tdes0 != 0x7fffffff ) { 900 dev->stats.collisions += (tdes0 >> 3) & 0xf; 901 dev->stats.tx_bytes += le32_to_cpu(txptr->tdes1) & 0x7ff; 902 if (tdes0 & TDES0_ERR_MASK) { 903 dev->stats.tx_errors++; 904 905 if (tdes0 & 0x0002) { /* UnderRun */ 906 db->tx_fifo_underrun++; 907 if ( !(db->cr6_data & CR6_SFT) ) { 908 db->cr6_data = db->cr6_data | CR6_SFT; 909 update_cr6(db->cr6_data, ioaddr); 910 } 911 } 912 if (tdes0 & 0x0100) 913 db->tx_excessive_collision++; 914 if (tdes0 & 0x0200) 915 db->tx_late_collision++; 916 if (tdes0 & 0x0400) 917 db->tx_no_carrier++; 918 if (tdes0 & 0x0800) 919 db->tx_loss_carrier++; 920 if (tdes0 & 0x4000) 921 db->tx_jabber_timeout++; 922 } 923 } 924 925 txptr = txptr->next_tx_desc; 926 }/* End of while */ 927 928 /* Update TX remove pointer to next */ 929 db->tx_remove_ptr = txptr; 930 931 /* Send the Tx packet in queue */ 932 if ( (db->tx_packet_cnt < TX_MAX_SEND_CNT) && db->tx_queue_cnt ) { 933 txptr->tdes0 = cpu_to_le32(0x80000000); /* Set owner bit */ 934 db->tx_packet_cnt++; /* Ready to send */ 935 db->tx_queue_cnt--; 936 dw32(DCR1, 0x1); /* Issue Tx polling */ 937 dev->trans_start = jiffies; /* saved time stamp */ 938 } 939 940 /* Resource available check */ 941 if ( db->tx_queue_cnt < TX_WAKE_DESC_CNT ) 942 netif_wake_queue(dev); /* Active upper layer, send again */ 943 } 944 945 946 /* 947 * Calculate the CRC valude of the Rx packet 948 * flag = 1 : return the reverse CRC (for the received packet CRC) 949 * 0 : return the normal CRC (for Hash Table index) 950 */ 951 952 static inline u32 cal_CRC(unsigned char * Data, unsigned int Len, u8 flag) 953 { 954 u32 crc = crc32(~0, Data, Len); 955 if (flag) crc = ~crc; 956 return crc; 957 } 958 959 960 /* 961 * Receive the come packet and pass to upper layer 962 */ 963 964 static void dmfe_rx_packet(struct DEVICE *dev, struct dmfe_board_info * db) 965 { 966 struct rx_desc *rxptr; 967 struct sk_buff *skb, *newskb; 968 int rxlen; 969 u32 rdes0; 970 971 rxptr = db->rx_ready_ptr; 972 973 while(db->rx_avail_cnt) { 974 rdes0 = le32_to_cpu(rxptr->rdes0); 975 if (rdes0 & 0x80000000) /* packet owner check */ 976 break; 977 978 db->rx_avail_cnt--; 979 db->interval_rx_cnt++; 980 981 pci_unmap_single(db->pdev, le32_to_cpu(rxptr->rdes2), 982 RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE); 983 984 if ( (rdes0 & 0x300) != 0x300) { 985 /* A packet without First/Last flag */ 986 /* reuse this SKB */ 987 DMFE_DBUG(0, "Reuse SK buffer, rdes0", rdes0); 988 dmfe_reuse_skb(db, rxptr->rx_skb_ptr); 989 } else { 990 /* A packet with First/Last flag */ 991 rxlen = ( (rdes0 >> 16) & 0x3fff) - 4; 992 993 /* error summary bit check */ 994 if (rdes0 & 0x8000) { 995 /* This is a error packet */ 996 dev->stats.rx_errors++; 997 if (rdes0 & 1) 998 dev->stats.rx_fifo_errors++; 999 if (rdes0 & 2) 1000 dev->stats.rx_crc_errors++; 1001 if (rdes0 & 0x80) 1002 dev->stats.rx_length_errors++; 1003 } 1004 1005 if ( !(rdes0 & 0x8000) || 1006 ((db->cr6_data & CR6_PM) && (rxlen>6)) ) { 1007 skb = rxptr->rx_skb_ptr; 1008 1009 /* Received Packet CRC check need or not */ 1010 if ( (db->dm910x_chk_mode & 1) && 1011 (cal_CRC(skb->data, rxlen, 1) != 1012 (*(u32 *) (skb->data+rxlen) ))) { /* FIXME (?) */ 1013 /* Found a error received packet */ 1014 dmfe_reuse_skb(db, rxptr->rx_skb_ptr); 1015 db->dm910x_chk_mode = 3; 1016 } else { 1017 /* Good packet, send to upper layer */ 1018 /* Shorst packet used new SKB */ 1019 if ((rxlen < RX_COPY_SIZE) && 1020 ((newskb = netdev_alloc_skb(dev, rxlen + 2)) 1021 != NULL)) { 1022 1023 skb = newskb; 1024 /* size less than COPY_SIZE, allocate a rxlen SKB */ 1025 skb_reserve(skb, 2); /* 16byte align */ 1026 skb_copy_from_linear_data(rxptr->rx_skb_ptr, 1027 skb_put(skb, rxlen), 1028 rxlen); 1029 dmfe_reuse_skb(db, rxptr->rx_skb_ptr); 1030 } else 1031 skb_put(skb, rxlen); 1032 1033 skb->protocol = eth_type_trans(skb, dev); 1034 netif_rx(skb); 1035 dev->stats.rx_packets++; 1036 dev->stats.rx_bytes += rxlen; 1037 } 1038 } else { 1039 /* Reuse SKB buffer when the packet is error */ 1040 DMFE_DBUG(0, "Reuse SK buffer, rdes0", rdes0); 1041 dmfe_reuse_skb(db, rxptr->rx_skb_ptr); 1042 } 1043 } 1044 1045 rxptr = rxptr->next_rx_desc; 1046 } 1047 1048 db->rx_ready_ptr = rxptr; 1049 } 1050 1051 /* 1052 * Set DM910X multicast address 1053 */ 1054 1055 static void dmfe_set_filter_mode(struct DEVICE * dev) 1056 { 1057 struct dmfe_board_info *db = netdev_priv(dev); 1058 unsigned long flags; 1059 int mc_count = netdev_mc_count(dev); 1060 1061 DMFE_DBUG(0, "dmfe_set_filter_mode()", 0); 1062 spin_lock_irqsave(&db->lock, flags); 1063 1064 if (dev->flags & IFF_PROMISC) { 1065 DMFE_DBUG(0, "Enable PROM Mode", 0); 1066 db->cr6_data |= CR6_PM | CR6_PBF; 1067 update_cr6(db->cr6_data, db->ioaddr); 1068 spin_unlock_irqrestore(&db->lock, flags); 1069 return; 1070 } 1071 1072 if (dev->flags & IFF_ALLMULTI || mc_count > DMFE_MAX_MULTICAST) { 1073 DMFE_DBUG(0, "Pass all multicast address", mc_count); 1074 db->cr6_data &= ~(CR6_PM | CR6_PBF); 1075 db->cr6_data |= CR6_PAM; 1076 spin_unlock_irqrestore(&db->lock, flags); 1077 return; 1078 } 1079 1080 DMFE_DBUG(0, "Set multicast address", mc_count); 1081 if (db->chip_id == PCI_DM9132_ID) 1082 dm9132_id_table(dev); /* DM9132 */ 1083 else 1084 send_filter_frame(dev); /* DM9102/DM9102A */ 1085 spin_unlock_irqrestore(&db->lock, flags); 1086 } 1087 1088 /* 1089 * Ethtool interace 1090 */ 1091 1092 static void dmfe_ethtool_get_drvinfo(struct net_device *dev, 1093 struct ethtool_drvinfo *info) 1094 { 1095 struct dmfe_board_info *np = netdev_priv(dev); 1096 1097 strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); 1098 strlcpy(info->version, DRV_VERSION, sizeof(info->version)); 1099 strlcpy(info->bus_info, pci_name(np->pdev), sizeof(info->bus_info)); 1100 } 1101 1102 static int dmfe_ethtool_set_wol(struct net_device *dev, 1103 struct ethtool_wolinfo *wolinfo) 1104 { 1105 struct dmfe_board_info *db = netdev_priv(dev); 1106 1107 if (wolinfo->wolopts & (WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | 1108 WAKE_ARP | WAKE_MAGICSECURE)) 1109 return -EOPNOTSUPP; 1110 1111 db->wol_mode = wolinfo->wolopts; 1112 return 0; 1113 } 1114 1115 static void dmfe_ethtool_get_wol(struct net_device *dev, 1116 struct ethtool_wolinfo *wolinfo) 1117 { 1118 struct dmfe_board_info *db = netdev_priv(dev); 1119 1120 wolinfo->supported = WAKE_PHY | WAKE_MAGIC; 1121 wolinfo->wolopts = db->wol_mode; 1122 } 1123 1124 1125 static const struct ethtool_ops netdev_ethtool_ops = { 1126 .get_drvinfo = dmfe_ethtool_get_drvinfo, 1127 .get_link = ethtool_op_get_link, 1128 .set_wol = dmfe_ethtool_set_wol, 1129 .get_wol = dmfe_ethtool_get_wol, 1130 }; 1131 1132 /* 1133 * A periodic timer routine 1134 * Dynamic media sense, allocate Rx buffer... 1135 */ 1136 1137 static void dmfe_timer(unsigned long data) 1138 { 1139 struct net_device *dev = (struct net_device *)data; 1140 struct dmfe_board_info *db = netdev_priv(dev); 1141 void __iomem *ioaddr = db->ioaddr; 1142 u32 tmp_cr8; 1143 unsigned char tmp_cr12; 1144 unsigned long flags; 1145 1146 int link_ok, link_ok_phy; 1147 1148 DMFE_DBUG(0, "dmfe_timer()", 0); 1149 spin_lock_irqsave(&db->lock, flags); 1150 1151 /* Media mode process when Link OK before enter this route */ 1152 if (db->first_in_callback == 0) { 1153 db->first_in_callback = 1; 1154 if (db->chip_type && (db->chip_id==PCI_DM9102_ID)) { 1155 db->cr6_data &= ~0x40000; 1156 update_cr6(db->cr6_data, ioaddr); 1157 dmfe_phy_write(ioaddr, db->phy_addr, 0, 0x1000, db->chip_id); 1158 db->cr6_data |= 0x40000; 1159 update_cr6(db->cr6_data, ioaddr); 1160 db->timer.expires = DMFE_TIMER_WUT + HZ * 2; 1161 add_timer(&db->timer); 1162 spin_unlock_irqrestore(&db->lock, flags); 1163 return; 1164 } 1165 } 1166 1167 1168 /* Operating Mode Check */ 1169 if ( (db->dm910x_chk_mode & 0x1) && 1170 (dev->stats.rx_packets > MAX_CHECK_PACKET) ) 1171 db->dm910x_chk_mode = 0x4; 1172 1173 /* Dynamic reset DM910X : system error or transmit time-out */ 1174 tmp_cr8 = dr32(DCR8); 1175 if ( (db->interval_rx_cnt==0) && (tmp_cr8) ) { 1176 db->reset_cr8++; 1177 db->wait_reset = 1; 1178 } 1179 db->interval_rx_cnt = 0; 1180 1181 /* TX polling kick monitor */ 1182 if ( db->tx_packet_cnt && 1183 time_after(jiffies, dev_trans_start(dev) + DMFE_TX_KICK) ) { 1184 dw32(DCR1, 0x1); /* Tx polling again */ 1185 1186 /* TX Timeout */ 1187 if (time_after(jiffies, dev_trans_start(dev) + DMFE_TX_TIMEOUT) ) { 1188 db->reset_TXtimeout++; 1189 db->wait_reset = 1; 1190 dev_warn(&dev->dev, "Tx timeout - resetting\n"); 1191 } 1192 } 1193 1194 if (db->wait_reset) { 1195 DMFE_DBUG(0, "Dynamic Reset device", db->tx_packet_cnt); 1196 db->reset_count++; 1197 dmfe_dynamic_reset(dev); 1198 db->first_in_callback = 0; 1199 db->timer.expires = DMFE_TIMER_WUT; 1200 add_timer(&db->timer); 1201 spin_unlock_irqrestore(&db->lock, flags); 1202 return; 1203 } 1204 1205 /* Link status check, Dynamic media type change */ 1206 if (db->chip_id == PCI_DM9132_ID) 1207 tmp_cr12 = dr8(DCR9 + 3); /* DM9132 */ 1208 else 1209 tmp_cr12 = dr8(DCR12); /* DM9102/DM9102A */ 1210 1211 if ( ((db->chip_id == PCI_DM9102_ID) && 1212 (db->chip_revision == 0x30)) || 1213 ((db->chip_id == PCI_DM9132_ID) && 1214 (db->chip_revision == 0x10)) ) { 1215 /* DM9102A Chip */ 1216 if (tmp_cr12 & 2) 1217 link_ok = 0; 1218 else 1219 link_ok = 1; 1220 } 1221 else 1222 /*0x43 is used instead of 0x3 because bit 6 should represent 1223 link status of external PHY */ 1224 link_ok = (tmp_cr12 & 0x43) ? 1 : 0; 1225 1226 1227 /* If chip reports that link is failed it could be because external 1228 PHY link status pin is not connected correctly to chip 1229 To be sure ask PHY too. 1230 */ 1231 1232 /* need a dummy read because of PHY's register latch*/ 1233 dmfe_phy_read (db->ioaddr, db->phy_addr, 1, db->chip_id); 1234 link_ok_phy = (dmfe_phy_read (db->ioaddr, 1235 db->phy_addr, 1, db->chip_id) & 0x4) ? 1 : 0; 1236 1237 if (link_ok_phy != link_ok) { 1238 DMFE_DBUG (0, "PHY and chip report different link status", 0); 1239 link_ok = link_ok | link_ok_phy; 1240 } 1241 1242 if ( !link_ok && netif_carrier_ok(dev)) { 1243 /* Link Failed */ 1244 DMFE_DBUG(0, "Link Failed", tmp_cr12); 1245 netif_carrier_off(dev); 1246 1247 /* For Force 10/100M Half/Full mode: Enable Auto-Nego mode */ 1248 /* AUTO or force 1M Homerun/Longrun don't need */ 1249 if ( !(db->media_mode & 0x38) ) 1250 dmfe_phy_write(db->ioaddr, db->phy_addr, 1251 0, 0x1000, db->chip_id); 1252 1253 /* AUTO mode, if INT phyxcer link failed, select EXT device */ 1254 if (db->media_mode & DMFE_AUTO) { 1255 /* 10/100M link failed, used 1M Home-Net */ 1256 db->cr6_data|=0x00040000; /* bit18=1, MII */ 1257 db->cr6_data&=~0x00000200; /* bit9=0, HD mode */ 1258 update_cr6(db->cr6_data, ioaddr); 1259 } 1260 } else if (!netif_carrier_ok(dev)) { 1261 1262 DMFE_DBUG(0, "Link link OK", tmp_cr12); 1263 1264 /* Auto Sense Speed */ 1265 if ( !(db->media_mode & DMFE_AUTO) || !dmfe_sense_speed(db)) { 1266 netif_carrier_on(dev); 1267 SHOW_MEDIA_TYPE(db->op_mode); 1268 } 1269 1270 dmfe_process_mode(db); 1271 } 1272 1273 /* HPNA remote command check */ 1274 if (db->HPNA_command & 0xf00) { 1275 db->HPNA_timer--; 1276 if (!db->HPNA_timer) 1277 dmfe_HPNA_remote_cmd_chk(db); 1278 } 1279 1280 /* Timer active again */ 1281 db->timer.expires = DMFE_TIMER_WUT; 1282 add_timer(&db->timer); 1283 spin_unlock_irqrestore(&db->lock, flags); 1284 } 1285 1286 1287 /* 1288 * Dynamic reset the DM910X board 1289 * Stop DM910X board 1290 * Free Tx/Rx allocated memory 1291 * Reset DM910X board 1292 * Re-initialize DM910X board 1293 */ 1294 1295 static void dmfe_dynamic_reset(struct net_device *dev) 1296 { 1297 struct dmfe_board_info *db = netdev_priv(dev); 1298 void __iomem *ioaddr = db->ioaddr; 1299 1300 DMFE_DBUG(0, "dmfe_dynamic_reset()", 0); 1301 1302 /* Sopt MAC controller */ 1303 db->cr6_data &= ~(CR6_RXSC | CR6_TXSC); /* Disable Tx/Rx */ 1304 update_cr6(db->cr6_data, ioaddr); 1305 dw32(DCR7, 0); /* Disable Interrupt */ 1306 dw32(DCR5, dr32(DCR5)); 1307 1308 /* Disable upper layer interface */ 1309 netif_stop_queue(dev); 1310 1311 /* Free Rx Allocate buffer */ 1312 dmfe_free_rxbuffer(db); 1313 1314 /* system variable init */ 1315 db->tx_packet_cnt = 0; 1316 db->tx_queue_cnt = 0; 1317 db->rx_avail_cnt = 0; 1318 netif_carrier_off(dev); 1319 db->wait_reset = 0; 1320 1321 /* Re-initialize DM910X board */ 1322 dmfe_init_dm910x(dev); 1323 1324 /* Restart upper layer interface */ 1325 netif_wake_queue(dev); 1326 } 1327 1328 1329 /* 1330 * free all allocated rx buffer 1331 */ 1332 1333 static void dmfe_free_rxbuffer(struct dmfe_board_info * db) 1334 { 1335 DMFE_DBUG(0, "dmfe_free_rxbuffer()", 0); 1336 1337 /* free allocated rx buffer */ 1338 while (db->rx_avail_cnt) { 1339 dev_kfree_skb(db->rx_ready_ptr->rx_skb_ptr); 1340 db->rx_ready_ptr = db->rx_ready_ptr->next_rx_desc; 1341 db->rx_avail_cnt--; 1342 } 1343 } 1344 1345 1346 /* 1347 * Reuse the SK buffer 1348 */ 1349 1350 static void dmfe_reuse_skb(struct dmfe_board_info *db, struct sk_buff * skb) 1351 { 1352 struct rx_desc *rxptr = db->rx_insert_ptr; 1353 1354 if (!(rxptr->rdes0 & cpu_to_le32(0x80000000))) { 1355 rxptr->rx_skb_ptr = skb; 1356 rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, 1357 skb->data, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) ); 1358 wmb(); 1359 rxptr->rdes0 = cpu_to_le32(0x80000000); 1360 db->rx_avail_cnt++; 1361 db->rx_insert_ptr = rxptr->next_rx_desc; 1362 } else 1363 DMFE_DBUG(0, "SK Buffer reuse method error", db->rx_avail_cnt); 1364 } 1365 1366 1367 /* 1368 * Initialize transmit/Receive descriptor 1369 * Using Chain structure, and allocate Tx/Rx buffer 1370 */ 1371 1372 static void dmfe_descriptor_init(struct net_device *dev) 1373 { 1374 struct dmfe_board_info *db = netdev_priv(dev); 1375 void __iomem *ioaddr = db->ioaddr; 1376 struct tx_desc *tmp_tx; 1377 struct rx_desc *tmp_rx; 1378 unsigned char *tmp_buf; 1379 dma_addr_t tmp_tx_dma, tmp_rx_dma; 1380 dma_addr_t tmp_buf_dma; 1381 int i; 1382 1383 DMFE_DBUG(0, "dmfe_descriptor_init()", 0); 1384 1385 /* tx descriptor start pointer */ 1386 db->tx_insert_ptr = db->first_tx_desc; 1387 db->tx_remove_ptr = db->first_tx_desc; 1388 dw32(DCR4, db->first_tx_desc_dma); /* TX DESC address */ 1389 1390 /* rx descriptor start pointer */ 1391 db->first_rx_desc = (void *)db->first_tx_desc + 1392 sizeof(struct tx_desc) * TX_DESC_CNT; 1393 1394 db->first_rx_desc_dma = db->first_tx_desc_dma + 1395 sizeof(struct tx_desc) * TX_DESC_CNT; 1396 db->rx_insert_ptr = db->first_rx_desc; 1397 db->rx_ready_ptr = db->first_rx_desc; 1398 dw32(DCR3, db->first_rx_desc_dma); /* RX DESC address */ 1399 1400 /* Init Transmit chain */ 1401 tmp_buf = db->buf_pool_start; 1402 tmp_buf_dma = db->buf_pool_dma_start; 1403 tmp_tx_dma = db->first_tx_desc_dma; 1404 for (tmp_tx = db->first_tx_desc, i = 0; i < TX_DESC_CNT; i++, tmp_tx++) { 1405 tmp_tx->tx_buf_ptr = tmp_buf; 1406 tmp_tx->tdes0 = cpu_to_le32(0); 1407 tmp_tx->tdes1 = cpu_to_le32(0x81000000); /* IC, chain */ 1408 tmp_tx->tdes2 = cpu_to_le32(tmp_buf_dma); 1409 tmp_tx_dma += sizeof(struct tx_desc); 1410 tmp_tx->tdes3 = cpu_to_le32(tmp_tx_dma); 1411 tmp_tx->next_tx_desc = tmp_tx + 1; 1412 tmp_buf = tmp_buf + TX_BUF_ALLOC; 1413 tmp_buf_dma = tmp_buf_dma + TX_BUF_ALLOC; 1414 } 1415 (--tmp_tx)->tdes3 = cpu_to_le32(db->first_tx_desc_dma); 1416 tmp_tx->next_tx_desc = db->first_tx_desc; 1417 1418 /* Init Receive descriptor chain */ 1419 tmp_rx_dma=db->first_rx_desc_dma; 1420 for (tmp_rx = db->first_rx_desc, i = 0; i < RX_DESC_CNT; i++, tmp_rx++) { 1421 tmp_rx->rdes0 = cpu_to_le32(0); 1422 tmp_rx->rdes1 = cpu_to_le32(0x01000600); 1423 tmp_rx_dma += sizeof(struct rx_desc); 1424 tmp_rx->rdes3 = cpu_to_le32(tmp_rx_dma); 1425 tmp_rx->next_rx_desc = tmp_rx + 1; 1426 } 1427 (--tmp_rx)->rdes3 = cpu_to_le32(db->first_rx_desc_dma); 1428 tmp_rx->next_rx_desc = db->first_rx_desc; 1429 1430 /* pre-allocate Rx buffer */ 1431 allocate_rx_buffer(dev); 1432 } 1433 1434 1435 /* 1436 * Update CR6 value 1437 * Firstly stop DM910X , then written value and start 1438 */ 1439 1440 static void update_cr6(u32 cr6_data, void __iomem *ioaddr) 1441 { 1442 u32 cr6_tmp; 1443 1444 cr6_tmp = cr6_data & ~0x2002; /* stop Tx/Rx */ 1445 dw32(DCR6, cr6_tmp); 1446 udelay(5); 1447 dw32(DCR6, cr6_data); 1448 udelay(5); 1449 } 1450 1451 1452 /* 1453 * Send a setup frame for DM9132 1454 * This setup frame initialize DM910X address filter mode 1455 */ 1456 1457 static void dm9132_id_table(struct net_device *dev) 1458 { 1459 struct dmfe_board_info *db = netdev_priv(dev); 1460 void __iomem *ioaddr = db->ioaddr + 0xc0; 1461 u16 *addrptr = (u16 *)dev->dev_addr; 1462 struct netdev_hw_addr *ha; 1463 u16 i, hash_table[4]; 1464 1465 /* Node address */ 1466 for (i = 0; i < 3; i++) { 1467 dw16(0, addrptr[i]); 1468 ioaddr += 4; 1469 } 1470 1471 /* Clear Hash Table */ 1472 memset(hash_table, 0, sizeof(hash_table)); 1473 1474 /* broadcast address */ 1475 hash_table[3] = 0x8000; 1476 1477 /* the multicast address in Hash Table : 64 bits */ 1478 netdev_for_each_mc_addr(ha, dev) { 1479 u32 hash_val = cal_CRC((char *)ha->addr, 6, 0) & 0x3f; 1480 1481 hash_table[hash_val / 16] |= (u16) 1 << (hash_val % 16); 1482 } 1483 1484 /* Write the hash table to MAC MD table */ 1485 for (i = 0; i < 4; i++, ioaddr += 4) 1486 dw16(0, hash_table[i]); 1487 } 1488 1489 1490 /* 1491 * Send a setup frame for DM9102/DM9102A 1492 * This setup frame initialize DM910X address filter mode 1493 */ 1494 1495 static void send_filter_frame(struct net_device *dev) 1496 { 1497 struct dmfe_board_info *db = netdev_priv(dev); 1498 struct netdev_hw_addr *ha; 1499 struct tx_desc *txptr; 1500 u16 * addrptr; 1501 u32 * suptr; 1502 int i; 1503 1504 DMFE_DBUG(0, "send_filter_frame()", 0); 1505 1506 txptr = db->tx_insert_ptr; 1507 suptr = (u32 *) txptr->tx_buf_ptr; 1508 1509 /* Node address */ 1510 addrptr = (u16 *) dev->dev_addr; 1511 *suptr++ = addrptr[0]; 1512 *suptr++ = addrptr[1]; 1513 *suptr++ = addrptr[2]; 1514 1515 /* broadcast address */ 1516 *suptr++ = 0xffff; 1517 *suptr++ = 0xffff; 1518 *suptr++ = 0xffff; 1519 1520 /* fit the multicast address */ 1521 netdev_for_each_mc_addr(ha, dev) { 1522 addrptr = (u16 *) ha->addr; 1523 *suptr++ = addrptr[0]; 1524 *suptr++ = addrptr[1]; 1525 *suptr++ = addrptr[2]; 1526 } 1527 1528 for (i = netdev_mc_count(dev); i < 14; i++) { 1529 *suptr++ = 0xffff; 1530 *suptr++ = 0xffff; 1531 *suptr++ = 0xffff; 1532 } 1533 1534 /* prepare the setup frame */ 1535 db->tx_insert_ptr = txptr->next_tx_desc; 1536 txptr->tdes1 = cpu_to_le32(0x890000c0); 1537 1538 /* Resource Check and Send the setup packet */ 1539 if (!db->tx_packet_cnt) { 1540 void __iomem *ioaddr = db->ioaddr; 1541 1542 /* Resource Empty */ 1543 db->tx_packet_cnt++; 1544 txptr->tdes0 = cpu_to_le32(0x80000000); 1545 update_cr6(db->cr6_data | 0x2000, ioaddr); 1546 dw32(DCR1, 0x1); /* Issue Tx polling */ 1547 update_cr6(db->cr6_data, ioaddr); 1548 dev->trans_start = jiffies; 1549 } else 1550 db->tx_queue_cnt++; /* Put in TX queue */ 1551 } 1552 1553 1554 /* 1555 * Allocate rx buffer, 1556 * As possible as allocate maxiumn Rx buffer 1557 */ 1558 1559 static void allocate_rx_buffer(struct net_device *dev) 1560 { 1561 struct dmfe_board_info *db = netdev_priv(dev); 1562 struct rx_desc *rxptr; 1563 struct sk_buff *skb; 1564 1565 rxptr = db->rx_insert_ptr; 1566 1567 while(db->rx_avail_cnt < RX_DESC_CNT) { 1568 if ( ( skb = netdev_alloc_skb(dev, RX_ALLOC_SIZE) ) == NULL ) 1569 break; 1570 rxptr->rx_skb_ptr = skb; /* FIXME (?) */ 1571 rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->data, 1572 RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) ); 1573 wmb(); 1574 rxptr->rdes0 = cpu_to_le32(0x80000000); 1575 rxptr = rxptr->next_rx_desc; 1576 db->rx_avail_cnt++; 1577 } 1578 1579 db->rx_insert_ptr = rxptr; 1580 } 1581 1582 static void srom_clk_write(void __iomem *ioaddr, u32 data) 1583 { 1584 static const u32 cmd[] = { 1585 CR9_SROM_READ | CR9_SRCS, 1586 CR9_SROM_READ | CR9_SRCS | CR9_SRCLK, 1587 CR9_SROM_READ | CR9_SRCS 1588 }; 1589 int i; 1590 1591 for (i = 0; i < ARRAY_SIZE(cmd); i++) { 1592 dw32(DCR9, data | cmd[i]); 1593 udelay(5); 1594 } 1595 } 1596 1597 /* 1598 * Read one word data from the serial ROM 1599 */ 1600 static u16 read_srom_word(void __iomem *ioaddr, int offset) 1601 { 1602 u16 srom_data; 1603 int i; 1604 1605 dw32(DCR9, CR9_SROM_READ); 1606 udelay(5); 1607 dw32(DCR9, CR9_SROM_READ | CR9_SRCS); 1608 udelay(5); 1609 1610 /* Send the Read Command 110b */ 1611 srom_clk_write(ioaddr, SROM_DATA_1); 1612 srom_clk_write(ioaddr, SROM_DATA_1); 1613 srom_clk_write(ioaddr, SROM_DATA_0); 1614 1615 /* Send the offset */ 1616 for (i = 5; i >= 0; i--) { 1617 srom_data = (offset & (1 << i)) ? SROM_DATA_1 : SROM_DATA_0; 1618 srom_clk_write(ioaddr, srom_data); 1619 } 1620 1621 dw32(DCR9, CR9_SROM_READ | CR9_SRCS); 1622 udelay(5); 1623 1624 for (i = 16; i > 0; i--) { 1625 dw32(DCR9, CR9_SROM_READ | CR9_SRCS | CR9_SRCLK); 1626 udelay(5); 1627 srom_data = (srom_data << 1) | 1628 ((dr32(DCR9) & CR9_CRDOUT) ? 1 : 0); 1629 dw32(DCR9, CR9_SROM_READ | CR9_SRCS); 1630 udelay(5); 1631 } 1632 1633 dw32(DCR9, CR9_SROM_READ); 1634 udelay(5); 1635 return srom_data; 1636 } 1637 1638 1639 /* 1640 * Auto sense the media mode 1641 */ 1642 1643 static u8 dmfe_sense_speed(struct dmfe_board_info *db) 1644 { 1645 void __iomem *ioaddr = db->ioaddr; 1646 u8 ErrFlag = 0; 1647 u16 phy_mode; 1648 1649 /* CR6 bit18=0, select 10/100M */ 1650 update_cr6(db->cr6_data & ~0x40000, ioaddr); 1651 1652 phy_mode = dmfe_phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id); 1653 phy_mode = dmfe_phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id); 1654 1655 if ( (phy_mode & 0x24) == 0x24 ) { 1656 if (db->chip_id == PCI_DM9132_ID) /* DM9132 */ 1657 phy_mode = dmfe_phy_read(db->ioaddr, 1658 db->phy_addr, 7, db->chip_id) & 0xf000; 1659 else /* DM9102/DM9102A */ 1660 phy_mode = dmfe_phy_read(db->ioaddr, 1661 db->phy_addr, 17, db->chip_id) & 0xf000; 1662 switch (phy_mode) { 1663 case 0x1000: db->op_mode = DMFE_10MHF; break; 1664 case 0x2000: db->op_mode = DMFE_10MFD; break; 1665 case 0x4000: db->op_mode = DMFE_100MHF; break; 1666 case 0x8000: db->op_mode = DMFE_100MFD; break; 1667 default: db->op_mode = DMFE_10MHF; 1668 ErrFlag = 1; 1669 break; 1670 } 1671 } else { 1672 db->op_mode = DMFE_10MHF; 1673 DMFE_DBUG(0, "Link Failed :", phy_mode); 1674 ErrFlag = 1; 1675 } 1676 1677 return ErrFlag; 1678 } 1679 1680 1681 /* 1682 * Set 10/100 phyxcer capability 1683 * AUTO mode : phyxcer register4 is NIC capability 1684 * Force mode: phyxcer register4 is the force media 1685 */ 1686 1687 static void dmfe_set_phyxcer(struct dmfe_board_info *db) 1688 { 1689 void __iomem *ioaddr = db->ioaddr; 1690 u16 phy_reg; 1691 1692 /* Select 10/100M phyxcer */ 1693 db->cr6_data &= ~0x40000; 1694 update_cr6(db->cr6_data, ioaddr); 1695 1696 /* DM9009 Chip: Phyxcer reg18 bit12=0 */ 1697 if (db->chip_id == PCI_DM9009_ID) { 1698 phy_reg = dmfe_phy_read(db->ioaddr, 1699 db->phy_addr, 18, db->chip_id) & ~0x1000; 1700 1701 dmfe_phy_write(db->ioaddr, 1702 db->phy_addr, 18, phy_reg, db->chip_id); 1703 } 1704 1705 /* Phyxcer capability setting */ 1706 phy_reg = dmfe_phy_read(db->ioaddr, db->phy_addr, 4, db->chip_id) & ~0x01e0; 1707 1708 if (db->media_mode & DMFE_AUTO) { 1709 /* AUTO Mode */ 1710 phy_reg |= db->PHY_reg4; 1711 } else { 1712 /* Force Mode */ 1713 switch(db->media_mode) { 1714 case DMFE_10MHF: phy_reg |= 0x20; break; 1715 case DMFE_10MFD: phy_reg |= 0x40; break; 1716 case DMFE_100MHF: phy_reg |= 0x80; break; 1717 case DMFE_100MFD: phy_reg |= 0x100; break; 1718 } 1719 if (db->chip_id == PCI_DM9009_ID) phy_reg &= 0x61; 1720 } 1721 1722 /* Write new capability to Phyxcer Reg4 */ 1723 if ( !(phy_reg & 0x01e0)) { 1724 phy_reg|=db->PHY_reg4; 1725 db->media_mode|=DMFE_AUTO; 1726 } 1727 dmfe_phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id); 1728 1729 /* Restart Auto-Negotiation */ 1730 if ( db->chip_type && (db->chip_id == PCI_DM9102_ID) ) 1731 dmfe_phy_write(db->ioaddr, db->phy_addr, 0, 0x1800, db->chip_id); 1732 if ( !db->chip_type ) 1733 dmfe_phy_write(db->ioaddr, db->phy_addr, 0, 0x1200, db->chip_id); 1734 } 1735 1736 1737 /* 1738 * Process op-mode 1739 * AUTO mode : PHY controller in Auto-negotiation Mode 1740 * Force mode: PHY controller in force mode with HUB 1741 * N-way force capability with SWITCH 1742 */ 1743 1744 static void dmfe_process_mode(struct dmfe_board_info *db) 1745 { 1746 u16 phy_reg; 1747 1748 /* Full Duplex Mode Check */ 1749 if (db->op_mode & 0x4) 1750 db->cr6_data |= CR6_FDM; /* Set Full Duplex Bit */ 1751 else 1752 db->cr6_data &= ~CR6_FDM; /* Clear Full Duplex Bit */ 1753 1754 /* Transciver Selection */ 1755 if (db->op_mode & 0x10) /* 1M HomePNA */ 1756 db->cr6_data |= 0x40000;/* External MII select */ 1757 else 1758 db->cr6_data &= ~0x40000;/* Internal 10/100 transciver */ 1759 1760 update_cr6(db->cr6_data, db->ioaddr); 1761 1762 /* 10/100M phyxcer force mode need */ 1763 if ( !(db->media_mode & 0x18)) { 1764 /* Forece Mode */ 1765 phy_reg = dmfe_phy_read(db->ioaddr, db->phy_addr, 6, db->chip_id); 1766 if ( !(phy_reg & 0x1) ) { 1767 /* parter without N-Way capability */ 1768 phy_reg = 0x0; 1769 switch(db->op_mode) { 1770 case DMFE_10MHF: phy_reg = 0x0; break; 1771 case DMFE_10MFD: phy_reg = 0x100; break; 1772 case DMFE_100MHF: phy_reg = 0x2000; break; 1773 case DMFE_100MFD: phy_reg = 0x2100; break; 1774 } 1775 dmfe_phy_write(db->ioaddr, 1776 db->phy_addr, 0, phy_reg, db->chip_id); 1777 if ( db->chip_type && (db->chip_id == PCI_DM9102_ID) ) 1778 mdelay(20); 1779 dmfe_phy_write(db->ioaddr, 1780 db->phy_addr, 0, phy_reg, db->chip_id); 1781 } 1782 } 1783 } 1784 1785 1786 /* 1787 * Write a word to Phy register 1788 */ 1789 1790 static void dmfe_phy_write(void __iomem *ioaddr, u8 phy_addr, u8 offset, 1791 u16 phy_data, u32 chip_id) 1792 { 1793 u16 i; 1794 1795 if (chip_id == PCI_DM9132_ID) { 1796 dw16(0x80 + offset * 4, phy_data); 1797 } else { 1798 /* DM9102/DM9102A Chip */ 1799 1800 /* Send 33 synchronization clock to Phy controller */ 1801 for (i = 0; i < 35; i++) 1802 dmfe_phy_write_1bit(ioaddr, PHY_DATA_1); 1803 1804 /* Send start command(01) to Phy */ 1805 dmfe_phy_write_1bit(ioaddr, PHY_DATA_0); 1806 dmfe_phy_write_1bit(ioaddr, PHY_DATA_1); 1807 1808 /* Send write command(01) to Phy */ 1809 dmfe_phy_write_1bit(ioaddr, PHY_DATA_0); 1810 dmfe_phy_write_1bit(ioaddr, PHY_DATA_1); 1811 1812 /* Send Phy address */ 1813 for (i = 0x10; i > 0; i = i >> 1) 1814 dmfe_phy_write_1bit(ioaddr, 1815 phy_addr & i ? PHY_DATA_1 : PHY_DATA_0); 1816 1817 /* Send register address */ 1818 for (i = 0x10; i > 0; i = i >> 1) 1819 dmfe_phy_write_1bit(ioaddr, 1820 offset & i ? PHY_DATA_1 : PHY_DATA_0); 1821 1822 /* written trasnition */ 1823 dmfe_phy_write_1bit(ioaddr, PHY_DATA_1); 1824 dmfe_phy_write_1bit(ioaddr, PHY_DATA_0); 1825 1826 /* Write a word data to PHY controller */ 1827 for ( i = 0x8000; i > 0; i >>= 1) 1828 dmfe_phy_write_1bit(ioaddr, 1829 phy_data & i ? PHY_DATA_1 : PHY_DATA_0); 1830 } 1831 } 1832 1833 1834 /* 1835 * Read a word data from phy register 1836 */ 1837 1838 static u16 dmfe_phy_read(void __iomem *ioaddr, u8 phy_addr, u8 offset, u32 chip_id) 1839 { 1840 int i; 1841 u16 phy_data; 1842 1843 if (chip_id == PCI_DM9132_ID) { 1844 /* DM9132 Chip */ 1845 phy_data = dr16(0x80 + offset * 4); 1846 } else { 1847 /* DM9102/DM9102A Chip */ 1848 1849 /* Send 33 synchronization clock to Phy controller */ 1850 for (i = 0; i < 35; i++) 1851 dmfe_phy_write_1bit(ioaddr, PHY_DATA_1); 1852 1853 /* Send start command(01) to Phy */ 1854 dmfe_phy_write_1bit(ioaddr, PHY_DATA_0); 1855 dmfe_phy_write_1bit(ioaddr, PHY_DATA_1); 1856 1857 /* Send read command(10) to Phy */ 1858 dmfe_phy_write_1bit(ioaddr, PHY_DATA_1); 1859 dmfe_phy_write_1bit(ioaddr, PHY_DATA_0); 1860 1861 /* Send Phy address */ 1862 for (i = 0x10; i > 0; i = i >> 1) 1863 dmfe_phy_write_1bit(ioaddr, 1864 phy_addr & i ? PHY_DATA_1 : PHY_DATA_0); 1865 1866 /* Send register address */ 1867 for (i = 0x10; i > 0; i = i >> 1) 1868 dmfe_phy_write_1bit(ioaddr, 1869 offset & i ? PHY_DATA_1 : PHY_DATA_0); 1870 1871 /* Skip transition state */ 1872 dmfe_phy_read_1bit(ioaddr); 1873 1874 /* read 16bit data */ 1875 for (phy_data = 0, i = 0; i < 16; i++) { 1876 phy_data <<= 1; 1877 phy_data |= dmfe_phy_read_1bit(ioaddr); 1878 } 1879 } 1880 1881 return phy_data; 1882 } 1883 1884 1885 /* 1886 * Write one bit data to Phy Controller 1887 */ 1888 1889 static void dmfe_phy_write_1bit(void __iomem *ioaddr, u32 phy_data) 1890 { 1891 dw32(DCR9, phy_data); /* MII Clock Low */ 1892 udelay(1); 1893 dw32(DCR9, phy_data | MDCLKH); /* MII Clock High */ 1894 udelay(1); 1895 dw32(DCR9, phy_data); /* MII Clock Low */ 1896 udelay(1); 1897 } 1898 1899 1900 /* 1901 * Read one bit phy data from PHY controller 1902 */ 1903 1904 static u16 dmfe_phy_read_1bit(void __iomem *ioaddr) 1905 { 1906 u16 phy_data; 1907 1908 dw32(DCR9, 0x50000); 1909 udelay(1); 1910 phy_data = (dr32(DCR9) >> 19) & 0x1; 1911 dw32(DCR9, 0x40000); 1912 udelay(1); 1913 1914 return phy_data; 1915 } 1916 1917 1918 /* 1919 * Parser SROM and media mode 1920 */ 1921 1922 static void dmfe_parse_srom(struct dmfe_board_info * db) 1923 { 1924 char * srom = db->srom; 1925 int dmfe_mode, tmp_reg; 1926 1927 DMFE_DBUG(0, "dmfe_parse_srom() ", 0); 1928 1929 /* Init CR15 */ 1930 db->cr15_data = CR15_DEFAULT; 1931 1932 /* Check SROM Version */ 1933 if ( ( (int) srom[18] & 0xff) == SROM_V41_CODE) { 1934 /* SROM V4.01 */ 1935 /* Get NIC support media mode */ 1936 db->NIC_capability = le16_to_cpup((__le16 *) (srom + 34)); 1937 db->PHY_reg4 = 0; 1938 for (tmp_reg = 1; tmp_reg < 0x10; tmp_reg <<= 1) { 1939 switch( db->NIC_capability & tmp_reg ) { 1940 case 0x1: db->PHY_reg4 |= 0x0020; break; 1941 case 0x2: db->PHY_reg4 |= 0x0040; break; 1942 case 0x4: db->PHY_reg4 |= 0x0080; break; 1943 case 0x8: db->PHY_reg4 |= 0x0100; break; 1944 } 1945 } 1946 1947 /* Media Mode Force or not check */ 1948 dmfe_mode = (le32_to_cpup((__le32 *) (srom + 34)) & 1949 le32_to_cpup((__le32 *) (srom + 36))); 1950 switch(dmfe_mode) { 1951 case 0x4: dmfe_media_mode = DMFE_100MHF; break; /* 100MHF */ 1952 case 0x2: dmfe_media_mode = DMFE_10MFD; break; /* 10MFD */ 1953 case 0x8: dmfe_media_mode = DMFE_100MFD; break; /* 100MFD */ 1954 case 0x100: 1955 case 0x200: dmfe_media_mode = DMFE_1M_HPNA; break;/* HomePNA */ 1956 } 1957 1958 /* Special Function setting */ 1959 /* VLAN function */ 1960 if ( (SF_mode & 0x1) || (srom[43] & 0x80) ) 1961 db->cr15_data |= 0x40; 1962 1963 /* Flow Control */ 1964 if ( (SF_mode & 0x2) || (srom[40] & 0x1) ) 1965 db->cr15_data |= 0x400; 1966 1967 /* TX pause packet */ 1968 if ( (SF_mode & 0x4) || (srom[40] & 0xe) ) 1969 db->cr15_data |= 0x9800; 1970 } 1971 1972 /* Parse HPNA parameter */ 1973 db->HPNA_command = 1; 1974 1975 /* Accept remote command or not */ 1976 if (HPNA_rx_cmd == 0) 1977 db->HPNA_command |= 0x8000; 1978 1979 /* Issue remote command & operation mode */ 1980 if (HPNA_tx_cmd == 1) 1981 switch(HPNA_mode) { /* Issue Remote Command */ 1982 case 0: db->HPNA_command |= 0x0904; break; 1983 case 1: db->HPNA_command |= 0x0a00; break; 1984 case 2: db->HPNA_command |= 0x0506; break; 1985 case 3: db->HPNA_command |= 0x0602; break; 1986 } 1987 else 1988 switch(HPNA_mode) { /* Don't Issue */ 1989 case 0: db->HPNA_command |= 0x0004; break; 1990 case 1: db->HPNA_command |= 0x0000; break; 1991 case 2: db->HPNA_command |= 0x0006; break; 1992 case 3: db->HPNA_command |= 0x0002; break; 1993 } 1994 1995 /* Check DM9801 or DM9802 present or not */ 1996 db->HPNA_present = 0; 1997 update_cr6(db->cr6_data | 0x40000, db->ioaddr); 1998 tmp_reg = dmfe_phy_read(db->ioaddr, db->phy_addr, 3, db->chip_id); 1999 if ( ( tmp_reg & 0xfff0 ) == 0xb900 ) { 2000 /* DM9801 or DM9802 present */ 2001 db->HPNA_timer = 8; 2002 if ( dmfe_phy_read(db->ioaddr, db->phy_addr, 31, db->chip_id) == 0x4404) { 2003 /* DM9801 HomeRun */ 2004 db->HPNA_present = 1; 2005 dmfe_program_DM9801(db, tmp_reg); 2006 } else { 2007 /* DM9802 LongRun */ 2008 db->HPNA_present = 2; 2009 dmfe_program_DM9802(db); 2010 } 2011 } 2012 2013 } 2014 2015 2016 /* 2017 * Init HomeRun DM9801 2018 */ 2019 2020 static void dmfe_program_DM9801(struct dmfe_board_info * db, int HPNA_rev) 2021 { 2022 uint reg17, reg25; 2023 2024 if ( !HPNA_NoiseFloor ) HPNA_NoiseFloor = DM9801_NOISE_FLOOR; 2025 switch(HPNA_rev) { 2026 case 0xb900: /* DM9801 E3 */ 2027 db->HPNA_command |= 0x1000; 2028 reg25 = dmfe_phy_read(db->ioaddr, db->phy_addr, 24, db->chip_id); 2029 reg25 = ( (reg25 + HPNA_NoiseFloor) & 0xff) | 0xf000; 2030 reg17 = dmfe_phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id); 2031 break; 2032 case 0xb901: /* DM9801 E4 */ 2033 reg25 = dmfe_phy_read(db->ioaddr, db->phy_addr, 25, db->chip_id); 2034 reg25 = (reg25 & 0xff00) + HPNA_NoiseFloor; 2035 reg17 = dmfe_phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id); 2036 reg17 = (reg17 & 0xfff0) + HPNA_NoiseFloor + 3; 2037 break; 2038 case 0xb902: /* DM9801 E5 */ 2039 case 0xb903: /* DM9801 E6 */ 2040 default: 2041 db->HPNA_command |= 0x1000; 2042 reg25 = dmfe_phy_read(db->ioaddr, db->phy_addr, 25, db->chip_id); 2043 reg25 = (reg25 & 0xff00) + HPNA_NoiseFloor - 5; 2044 reg17 = dmfe_phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id); 2045 reg17 = (reg17 & 0xfff0) + HPNA_NoiseFloor; 2046 break; 2047 } 2048 dmfe_phy_write(db->ioaddr, db->phy_addr, 16, db->HPNA_command, db->chip_id); 2049 dmfe_phy_write(db->ioaddr, db->phy_addr, 17, reg17, db->chip_id); 2050 dmfe_phy_write(db->ioaddr, db->phy_addr, 25, reg25, db->chip_id); 2051 } 2052 2053 2054 /* 2055 * Init HomeRun DM9802 2056 */ 2057 2058 static void dmfe_program_DM9802(struct dmfe_board_info * db) 2059 { 2060 uint phy_reg; 2061 2062 if ( !HPNA_NoiseFloor ) HPNA_NoiseFloor = DM9802_NOISE_FLOOR; 2063 dmfe_phy_write(db->ioaddr, db->phy_addr, 16, db->HPNA_command, db->chip_id); 2064 phy_reg = dmfe_phy_read(db->ioaddr, db->phy_addr, 25, db->chip_id); 2065 phy_reg = ( phy_reg & 0xff00) + HPNA_NoiseFloor; 2066 dmfe_phy_write(db->ioaddr, db->phy_addr, 25, phy_reg, db->chip_id); 2067 } 2068 2069 2070 /* 2071 * Check remote HPNA power and speed status. If not correct, 2072 * issue command again. 2073 */ 2074 2075 static void dmfe_HPNA_remote_cmd_chk(struct dmfe_board_info * db) 2076 { 2077 uint phy_reg; 2078 2079 /* Got remote device status */ 2080 phy_reg = dmfe_phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id) & 0x60; 2081 switch(phy_reg) { 2082 case 0x00: phy_reg = 0x0a00;break; /* LP/LS */ 2083 case 0x20: phy_reg = 0x0900;break; /* LP/HS */ 2084 case 0x40: phy_reg = 0x0600;break; /* HP/LS */ 2085 case 0x60: phy_reg = 0x0500;break; /* HP/HS */ 2086 } 2087 2088 /* Check remote device status match our setting ot not */ 2089 if ( phy_reg != (db->HPNA_command & 0x0f00) ) { 2090 dmfe_phy_write(db->ioaddr, db->phy_addr, 16, db->HPNA_command, 2091 db->chip_id); 2092 db->HPNA_timer=8; 2093 } else 2094 db->HPNA_timer=600; /* Match, every 10 minutes, check */ 2095 } 2096 2097 2098 2099 static const struct pci_device_id dmfe_pci_tbl[] = { 2100 { 0x1282, 0x9132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9132_ID }, 2101 { 0x1282, 0x9102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9102_ID }, 2102 { 0x1282, 0x9100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9100_ID }, 2103 { 0x1282, 0x9009, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9009_ID }, 2104 { 0, } 2105 }; 2106 MODULE_DEVICE_TABLE(pci, dmfe_pci_tbl); 2107 2108 2109 #ifdef CONFIG_PM 2110 static int dmfe_suspend(struct pci_dev *pci_dev, pm_message_t state) 2111 { 2112 struct net_device *dev = pci_get_drvdata(pci_dev); 2113 struct dmfe_board_info *db = netdev_priv(dev); 2114 void __iomem *ioaddr = db->ioaddr; 2115 u32 tmp; 2116 2117 /* Disable upper layer interface */ 2118 netif_device_detach(dev); 2119 2120 /* Disable Tx/Rx */ 2121 db->cr6_data &= ~(CR6_RXSC | CR6_TXSC); 2122 update_cr6(db->cr6_data, ioaddr); 2123 2124 /* Disable Interrupt */ 2125 dw32(DCR7, 0); 2126 dw32(DCR5, dr32(DCR5)); 2127 2128 /* Fre RX buffers */ 2129 dmfe_free_rxbuffer(db); 2130 2131 /* Enable WOL */ 2132 pci_read_config_dword(pci_dev, 0x40, &tmp); 2133 tmp &= ~(DMFE_WOL_LINKCHANGE|DMFE_WOL_MAGICPACKET); 2134 2135 if (db->wol_mode & WAKE_PHY) 2136 tmp |= DMFE_WOL_LINKCHANGE; 2137 if (db->wol_mode & WAKE_MAGIC) 2138 tmp |= DMFE_WOL_MAGICPACKET; 2139 2140 pci_write_config_dword(pci_dev, 0x40, tmp); 2141 2142 pci_enable_wake(pci_dev, PCI_D3hot, 1); 2143 pci_enable_wake(pci_dev, PCI_D3cold, 1); 2144 2145 /* Power down device*/ 2146 pci_save_state(pci_dev); 2147 pci_set_power_state(pci_dev, pci_choose_state (pci_dev, state)); 2148 2149 return 0; 2150 } 2151 2152 static int dmfe_resume(struct pci_dev *pci_dev) 2153 { 2154 struct net_device *dev = pci_get_drvdata(pci_dev); 2155 u32 tmp; 2156 2157 pci_set_power_state(pci_dev, PCI_D0); 2158 pci_restore_state(pci_dev); 2159 2160 /* Re-initialize DM910X board */ 2161 dmfe_init_dm910x(dev); 2162 2163 /* Disable WOL */ 2164 pci_read_config_dword(pci_dev, 0x40, &tmp); 2165 2166 tmp &= ~(DMFE_WOL_LINKCHANGE | DMFE_WOL_MAGICPACKET); 2167 pci_write_config_dword(pci_dev, 0x40, tmp); 2168 2169 pci_enable_wake(pci_dev, PCI_D3hot, 0); 2170 pci_enable_wake(pci_dev, PCI_D3cold, 0); 2171 2172 /* Restart upper layer interface */ 2173 netif_device_attach(dev); 2174 2175 return 0; 2176 } 2177 #else 2178 #define dmfe_suspend NULL 2179 #define dmfe_resume NULL 2180 #endif 2181 2182 static struct pci_driver dmfe_driver = { 2183 .name = "dmfe", 2184 .id_table = dmfe_pci_tbl, 2185 .probe = dmfe_init_one, 2186 .remove = dmfe_remove_one, 2187 .suspend = dmfe_suspend, 2188 .resume = dmfe_resume 2189 }; 2190 2191 MODULE_AUTHOR("Sten Wang, sten_wang@davicom.com.tw"); 2192 MODULE_DESCRIPTION("Davicom DM910X fast ethernet driver"); 2193 MODULE_LICENSE("GPL"); 2194 MODULE_VERSION(DRV_VERSION); 2195 2196 module_param(debug, int, 0); 2197 module_param(mode, byte, 0); 2198 module_param(cr6set, int, 0); 2199 module_param(chkmode, byte, 0); 2200 module_param(HPNA_mode, byte, 0); 2201 module_param(HPNA_rx_cmd, byte, 0); 2202 module_param(HPNA_tx_cmd, byte, 0); 2203 module_param(HPNA_NoiseFloor, byte, 0); 2204 module_param(SF_mode, byte, 0); 2205 MODULE_PARM_DESC(debug, "Davicom DM9xxx enable debugging (0-1)"); 2206 MODULE_PARM_DESC(mode, "Davicom DM9xxx: " 2207 "Bit 0: 10/100Mbps, bit 2: duplex, bit 8: HomePNA"); 2208 2209 MODULE_PARM_DESC(SF_mode, "Davicom DM9xxx special function " 2210 "(bit 0: VLAN, bit 1 Flow Control, bit 2: TX pause packet)"); 2211 2212 /* Description: 2213 * when user used insmod to add module, system invoked init_module() 2214 * to initialize and register. 2215 */ 2216 2217 static int __init dmfe_init_module(void) 2218 { 2219 int rc; 2220 2221 pr_info("%s\n", version); 2222 printed_version = 1; 2223 2224 DMFE_DBUG(0, "init_module() ", debug); 2225 2226 if (debug) 2227 dmfe_debug = debug; /* set debug flag */ 2228 if (cr6set) 2229 dmfe_cr6_user_set = cr6set; 2230 2231 switch(mode) { 2232 case DMFE_10MHF: 2233 case DMFE_100MHF: 2234 case DMFE_10MFD: 2235 case DMFE_100MFD: 2236 case DMFE_1M_HPNA: 2237 dmfe_media_mode = mode; 2238 break; 2239 default:dmfe_media_mode = DMFE_AUTO; 2240 break; 2241 } 2242 2243 if (HPNA_mode > 4) 2244 HPNA_mode = 0; /* Default: LP/HS */ 2245 if (HPNA_rx_cmd > 1) 2246 HPNA_rx_cmd = 0; /* Default: Ignored remote cmd */ 2247 if (HPNA_tx_cmd > 1) 2248 HPNA_tx_cmd = 0; /* Default: Don't issue remote cmd */ 2249 if (HPNA_NoiseFloor > 15) 2250 HPNA_NoiseFloor = 0; 2251 2252 rc = pci_register_driver(&dmfe_driver); 2253 if (rc < 0) 2254 return rc; 2255 2256 return 0; 2257 } 2258 2259 2260 /* 2261 * Description: 2262 * when user used rmmod to delete module, system invoked clean_module() 2263 * to un-register all registered services. 2264 */ 2265 2266 static void __exit dmfe_cleanup_module(void) 2267 { 2268 DMFE_DBUG(0, "dmfe_cleanup_module() ", debug); 2269 pci_unregister_driver(&dmfe_driver); 2270 } 2271 2272 module_init(dmfe_init_module); 2273 module_exit(dmfe_cleanup_module); 2274