1 /* SocketCAN driver for Microchip CAN BUS Analyzer Tool 2 * 3 * Copyright (C) 2017 Mobica Limited 4 * 5 * This program is free software; you can redistribute it and/or modify it 6 * under the terms of the GNU General Public License as published 7 * by the Free Software Foundation; version 2 of the License. 8 * 9 * This program is distributed in the hope that it will be useful, but 10 * WITHOUT ANY WARRANTY; without even the implied warranty of 11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 12 * General Public License for more details. 13 * 14 * You should have received a copy of the GNU General Public License along 15 * with this program. 16 * 17 * This driver is inspired by the 4.6.2 version of net/can/usb/usb_8dev.c 18 */ 19 20 #include <asm/unaligned.h> 21 #include <linux/can.h> 22 #include <linux/can/dev.h> 23 #include <linux/can/error.h> 24 #include <linux/can/led.h> 25 #include <linux/module.h> 26 #include <linux/netdevice.h> 27 #include <linux/signal.h> 28 #include <linux/slab.h> 29 #include <linux/usb.h> 30 31 /* vendor and product id */ 32 #define MCBA_MODULE_NAME "mcba_usb" 33 #define MCBA_VENDOR_ID 0x04d8 34 #define MCBA_PRODUCT_ID 0x0a30 35 36 /* driver constants */ 37 #define MCBA_MAX_RX_URBS 20 38 #define MCBA_MAX_TX_URBS 20 39 #define MCBA_CTX_FREE MCBA_MAX_TX_URBS 40 41 /* RX buffer must be bigger than msg size since at the 42 * beggining USB messages are stacked. 43 */ 44 #define MCBA_USB_RX_BUFF_SIZE 64 45 #define MCBA_USB_TX_BUFF_SIZE (sizeof(struct mcba_usb_msg)) 46 47 /* MCBA endpoint numbers */ 48 #define MCBA_USB_EP_IN 1 49 #define MCBA_USB_EP_OUT 1 50 51 /* Microchip command id */ 52 #define MBCA_CMD_RECEIVE_MESSAGE 0xE3 53 #define MBCA_CMD_I_AM_ALIVE_FROM_CAN 0xF5 54 #define MBCA_CMD_I_AM_ALIVE_FROM_USB 0xF7 55 #define MBCA_CMD_CHANGE_BIT_RATE 0xA1 56 #define MBCA_CMD_TRANSMIT_MESSAGE_EV 0xA3 57 #define MBCA_CMD_SETUP_TERMINATION_RESISTANCE 0xA8 58 #define MBCA_CMD_READ_FW_VERSION 0xA9 59 #define MBCA_CMD_NOTHING_TO_SEND 0xFF 60 #define MBCA_CMD_TRANSMIT_MESSAGE_RSP 0xE2 61 62 #define MCBA_VER_REQ_USB 1 63 #define MCBA_VER_REQ_CAN 2 64 65 #define MCBA_SIDL_EXID_MASK 0x8 66 #define MCBA_DLC_MASK 0xf 67 #define MCBA_DLC_RTR_MASK 0x40 68 69 #define MCBA_CAN_STATE_WRN_TH 95 70 #define MCBA_CAN_STATE_ERR_PSV_TH 127 71 72 #define MCBA_TERMINATION_DISABLED CAN_TERMINATION_DISABLED 73 #define MCBA_TERMINATION_ENABLED 120 74 75 struct mcba_usb_ctx { 76 struct mcba_priv *priv; 77 u32 ndx; 78 u8 dlc; 79 bool can; 80 }; 81 82 /* Structure to hold all of our device specific stuff */ 83 struct mcba_priv { 84 struct can_priv can; /* must be the first member */ 85 struct sk_buff *echo_skb[MCBA_MAX_TX_URBS]; 86 struct mcba_usb_ctx tx_context[MCBA_MAX_TX_URBS]; 87 struct usb_device *udev; 88 struct net_device *netdev; 89 struct usb_anchor tx_submitted; 90 struct usb_anchor rx_submitted; 91 struct can_berr_counter bec; 92 bool usb_ka_first_pass; 93 bool can_ka_first_pass; 94 bool can_speed_check; 95 atomic_t free_ctx_cnt; 96 }; 97 98 /* CAN frame */ 99 struct __packed mcba_usb_msg_can { 100 u8 cmd_id; 101 __be16 eid; 102 __be16 sid; 103 u8 dlc; 104 u8 data[8]; 105 u8 timestamp[4]; 106 u8 checksum; 107 }; 108 109 /* command frame */ 110 struct __packed mcba_usb_msg { 111 u8 cmd_id; 112 u8 unused[18]; 113 }; 114 115 struct __packed mcba_usb_msg_ka_usb { 116 u8 cmd_id; 117 u8 termination_state; 118 u8 soft_ver_major; 119 u8 soft_ver_minor; 120 u8 unused[15]; 121 }; 122 123 struct __packed mcba_usb_msg_ka_can { 124 u8 cmd_id; 125 u8 tx_err_cnt; 126 u8 rx_err_cnt; 127 u8 rx_buff_ovfl; 128 u8 tx_bus_off; 129 __be16 can_bitrate; 130 __le16 rx_lost; 131 u8 can_stat; 132 u8 soft_ver_major; 133 u8 soft_ver_minor; 134 u8 debug_mode; 135 u8 test_complete; 136 u8 test_result; 137 u8 unused[4]; 138 }; 139 140 struct __packed mcba_usb_msg_change_bitrate { 141 u8 cmd_id; 142 __be16 bitrate; 143 u8 unused[16]; 144 }; 145 146 struct __packed mcba_usb_msg_termination { 147 u8 cmd_id; 148 u8 termination; 149 u8 unused[17]; 150 }; 151 152 struct __packed mcba_usb_msg_fw_ver { 153 u8 cmd_id; 154 u8 pic; 155 u8 unused[17]; 156 }; 157 158 static const struct usb_device_id mcba_usb_table[] = { 159 { USB_DEVICE(MCBA_VENDOR_ID, MCBA_PRODUCT_ID) }, 160 {} /* Terminating entry */ 161 }; 162 163 MODULE_DEVICE_TABLE(usb, mcba_usb_table); 164 165 static const u16 mcba_termination[] = { MCBA_TERMINATION_DISABLED, 166 MCBA_TERMINATION_ENABLED }; 167 168 static const u32 mcba_bitrate[] = { 20000, 33333, 50000, 80000, 83333, 169 100000, 125000, 150000, 175000, 200000, 170 225000, 250000, 275000, 300000, 500000, 171 625000, 800000, 1000000 }; 172 173 static inline void mcba_init_ctx(struct mcba_priv *priv) 174 { 175 int i = 0; 176 177 for (i = 0; i < MCBA_MAX_TX_URBS; i++) { 178 priv->tx_context[i].ndx = MCBA_CTX_FREE; 179 priv->tx_context[i].priv = priv; 180 } 181 182 atomic_set(&priv->free_ctx_cnt, ARRAY_SIZE(priv->tx_context)); 183 } 184 185 static inline struct mcba_usb_ctx *mcba_usb_get_free_ctx(struct mcba_priv *priv, 186 struct can_frame *cf) 187 { 188 int i = 0; 189 struct mcba_usb_ctx *ctx = NULL; 190 191 for (i = 0; i < MCBA_MAX_TX_URBS; i++) { 192 if (priv->tx_context[i].ndx == MCBA_CTX_FREE) { 193 ctx = &priv->tx_context[i]; 194 ctx->ndx = i; 195 196 if (cf) { 197 ctx->can = true; 198 ctx->dlc = cf->can_dlc; 199 } else { 200 ctx->can = false; 201 ctx->dlc = 0; 202 } 203 204 atomic_dec(&priv->free_ctx_cnt); 205 break; 206 } 207 } 208 209 if (!atomic_read(&priv->free_ctx_cnt)) 210 /* That was the last free ctx. Slow down tx path */ 211 netif_stop_queue(priv->netdev); 212 213 return ctx; 214 } 215 216 /* mcba_usb_free_ctx and mcba_usb_get_free_ctx are executed by different 217 * threads. The order of execution in below function is important. 218 */ 219 static inline void mcba_usb_free_ctx(struct mcba_usb_ctx *ctx) 220 { 221 /* Increase number of free ctxs before freeing ctx */ 222 atomic_inc(&ctx->priv->free_ctx_cnt); 223 224 ctx->ndx = MCBA_CTX_FREE; 225 226 /* Wake up the queue once ctx is marked free */ 227 netif_wake_queue(ctx->priv->netdev); 228 } 229 230 static void mcba_usb_write_bulk_callback(struct urb *urb) 231 { 232 struct mcba_usb_ctx *ctx = urb->context; 233 struct net_device *netdev; 234 235 WARN_ON(!ctx); 236 237 netdev = ctx->priv->netdev; 238 239 /* free up our allocated buffer */ 240 usb_free_coherent(urb->dev, urb->transfer_buffer_length, 241 urb->transfer_buffer, urb->transfer_dma); 242 243 if (ctx->can) { 244 if (!netif_device_present(netdev)) 245 return; 246 247 netdev->stats.tx_packets++; 248 netdev->stats.tx_bytes += ctx->dlc; 249 250 can_led_event(netdev, CAN_LED_EVENT_TX); 251 can_get_echo_skb(netdev, ctx->ndx); 252 } 253 254 if (urb->status) 255 netdev_info(netdev, "Tx URB aborted (%d)\n", urb->status); 256 257 /* Release the context */ 258 mcba_usb_free_ctx(ctx); 259 } 260 261 /* Send data to device */ 262 static netdev_tx_t mcba_usb_xmit(struct mcba_priv *priv, 263 struct mcba_usb_msg *usb_msg, 264 struct mcba_usb_ctx *ctx) 265 { 266 struct urb *urb; 267 u8 *buf; 268 int err; 269 270 /* create a URB, and a buffer for it, and copy the data to the URB */ 271 urb = usb_alloc_urb(0, GFP_ATOMIC); 272 if (!urb) 273 return -ENOMEM; 274 275 buf = usb_alloc_coherent(priv->udev, MCBA_USB_TX_BUFF_SIZE, GFP_ATOMIC, 276 &urb->transfer_dma); 277 if (!buf) { 278 err = -ENOMEM; 279 goto nomembuf; 280 } 281 282 memcpy(buf, usb_msg, MCBA_USB_TX_BUFF_SIZE); 283 284 usb_fill_bulk_urb(urb, priv->udev, 285 usb_sndbulkpipe(priv->udev, MCBA_USB_EP_OUT), buf, 286 MCBA_USB_TX_BUFF_SIZE, mcba_usb_write_bulk_callback, 287 ctx); 288 289 urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; 290 usb_anchor_urb(urb, &priv->tx_submitted); 291 292 err = usb_submit_urb(urb, GFP_ATOMIC); 293 if (unlikely(err)) 294 goto failed; 295 296 /* Release our reference to this URB, the USB core will eventually free 297 * it entirely. 298 */ 299 usb_free_urb(urb); 300 301 return 0; 302 303 failed: 304 usb_unanchor_urb(urb); 305 usb_free_coherent(priv->udev, MCBA_USB_TX_BUFF_SIZE, buf, 306 urb->transfer_dma); 307 308 if (err == -ENODEV) 309 netif_device_detach(priv->netdev); 310 else 311 netdev_warn(priv->netdev, "failed tx_urb %d\n", err); 312 313 nomembuf: 314 usb_free_urb(urb); 315 316 return err; 317 } 318 319 /* Send data to device */ 320 static netdev_tx_t mcba_usb_start_xmit(struct sk_buff *skb, 321 struct net_device *netdev) 322 { 323 struct mcba_priv *priv = netdev_priv(netdev); 324 struct can_frame *cf = (struct can_frame *)skb->data; 325 struct mcba_usb_ctx *ctx = NULL; 326 struct net_device_stats *stats = &priv->netdev->stats; 327 u16 sid; 328 int err; 329 struct mcba_usb_msg_can usb_msg = { 330 .cmd_id = MBCA_CMD_TRANSMIT_MESSAGE_EV 331 }; 332 333 if (can_dropped_invalid_skb(netdev, skb)) 334 return NETDEV_TX_OK; 335 336 ctx = mcba_usb_get_free_ctx(priv, cf); 337 if (!ctx) 338 return NETDEV_TX_BUSY; 339 340 can_put_echo_skb(skb, priv->netdev, ctx->ndx); 341 342 if (cf->can_id & CAN_EFF_FLAG) { 343 /* SIDH | SIDL | EIDH | EIDL 344 * 28 - 21 | 20 19 18 x x x 17 16 | 15 - 8 | 7 - 0 345 */ 346 sid = MCBA_SIDL_EXID_MASK; 347 /* store 28-18 bits */ 348 sid |= (cf->can_id & 0x1ffc0000) >> 13; 349 /* store 17-16 bits */ 350 sid |= (cf->can_id & 0x30000) >> 16; 351 put_unaligned_be16(sid, &usb_msg.sid); 352 353 /* store 15-0 bits */ 354 put_unaligned_be16(cf->can_id & 0xffff, &usb_msg.eid); 355 } else { 356 /* SIDH | SIDL 357 * 10 - 3 | 2 1 0 x x x x x 358 */ 359 put_unaligned_be16((cf->can_id & CAN_SFF_MASK) << 5, 360 &usb_msg.sid); 361 usb_msg.eid = 0; 362 } 363 364 usb_msg.dlc = cf->can_dlc; 365 366 memcpy(usb_msg.data, cf->data, usb_msg.dlc); 367 368 if (cf->can_id & CAN_RTR_FLAG) 369 usb_msg.dlc |= MCBA_DLC_RTR_MASK; 370 371 err = mcba_usb_xmit(priv, (struct mcba_usb_msg *)&usb_msg, ctx); 372 if (err) 373 goto xmit_failed; 374 375 return NETDEV_TX_OK; 376 377 xmit_failed: 378 can_free_echo_skb(priv->netdev, ctx->ndx); 379 mcba_usb_free_ctx(ctx); 380 dev_kfree_skb(skb); 381 stats->tx_dropped++; 382 383 return NETDEV_TX_OK; 384 } 385 386 /* Send cmd to device */ 387 static void mcba_usb_xmit_cmd(struct mcba_priv *priv, 388 struct mcba_usb_msg *usb_msg) 389 { 390 struct mcba_usb_ctx *ctx = NULL; 391 int err; 392 393 ctx = mcba_usb_get_free_ctx(priv, NULL); 394 if (!ctx) { 395 netdev_err(priv->netdev, 396 "Lack of free ctx. Sending (%d) cmd aborted", 397 usb_msg->cmd_id); 398 399 return; 400 } 401 402 err = mcba_usb_xmit(priv, usb_msg, ctx); 403 if (err) 404 netdev_err(priv->netdev, "Failed to send cmd (%d)", 405 usb_msg->cmd_id); 406 } 407 408 static void mcba_usb_xmit_change_bitrate(struct mcba_priv *priv, u16 bitrate) 409 { 410 struct mcba_usb_msg_change_bitrate usb_msg = { 411 .cmd_id = MBCA_CMD_CHANGE_BIT_RATE 412 }; 413 414 put_unaligned_be16(bitrate, &usb_msg.bitrate); 415 416 mcba_usb_xmit_cmd(priv, (struct mcba_usb_msg *)&usb_msg); 417 } 418 419 static void mcba_usb_xmit_read_fw_ver(struct mcba_priv *priv, u8 pic) 420 { 421 struct mcba_usb_msg_fw_ver usb_msg = { 422 .cmd_id = MBCA_CMD_READ_FW_VERSION, 423 .pic = pic 424 }; 425 426 mcba_usb_xmit_cmd(priv, (struct mcba_usb_msg *)&usb_msg); 427 } 428 429 static void mcba_usb_process_can(struct mcba_priv *priv, 430 struct mcba_usb_msg_can *msg) 431 { 432 struct can_frame *cf; 433 struct sk_buff *skb; 434 struct net_device_stats *stats = &priv->netdev->stats; 435 u16 sid; 436 437 skb = alloc_can_skb(priv->netdev, &cf); 438 if (!skb) 439 return; 440 441 sid = get_unaligned_be16(&msg->sid); 442 443 if (sid & MCBA_SIDL_EXID_MASK) { 444 /* SIDH | SIDL | EIDH | EIDL 445 * 28 - 21 | 20 19 18 x x x 17 16 | 15 - 8 | 7 - 0 446 */ 447 cf->can_id = CAN_EFF_FLAG; 448 449 /* store 28-18 bits */ 450 cf->can_id |= (sid & 0xffe0) << 13; 451 /* store 17-16 bits */ 452 cf->can_id |= (sid & 3) << 16; 453 /* store 15-0 bits */ 454 cf->can_id |= get_unaligned_be16(&msg->eid); 455 } else { 456 /* SIDH | SIDL 457 * 10 - 3 | 2 1 0 x x x x x 458 */ 459 cf->can_id = (sid & 0xffe0) >> 5; 460 } 461 462 if (msg->dlc & MCBA_DLC_RTR_MASK) 463 cf->can_id |= CAN_RTR_FLAG; 464 465 cf->can_dlc = get_can_dlc(msg->dlc & MCBA_DLC_MASK); 466 467 memcpy(cf->data, msg->data, cf->can_dlc); 468 469 stats->rx_packets++; 470 stats->rx_bytes += cf->can_dlc; 471 472 can_led_event(priv->netdev, CAN_LED_EVENT_RX); 473 netif_rx(skb); 474 } 475 476 static void mcba_usb_process_ka_usb(struct mcba_priv *priv, 477 struct mcba_usb_msg_ka_usb *msg) 478 { 479 if (unlikely(priv->usb_ka_first_pass)) { 480 netdev_info(priv->netdev, "PIC USB version %hhu.%hhu\n", 481 msg->soft_ver_major, msg->soft_ver_minor); 482 483 priv->usb_ka_first_pass = false; 484 } 485 486 if (msg->termination_state) 487 priv->can.termination = MCBA_TERMINATION_ENABLED; 488 else 489 priv->can.termination = MCBA_TERMINATION_DISABLED; 490 } 491 492 static u32 convert_can2host_bitrate(struct mcba_usb_msg_ka_can *msg) 493 { 494 const u32 bitrate = get_unaligned_be16(&msg->can_bitrate); 495 496 if ((bitrate == 33) || (bitrate == 83)) 497 return bitrate * 1000 + 333; 498 else 499 return bitrate * 1000; 500 } 501 502 static void mcba_usb_process_ka_can(struct mcba_priv *priv, 503 struct mcba_usb_msg_ka_can *msg) 504 { 505 if (unlikely(priv->can_ka_first_pass)) { 506 netdev_info(priv->netdev, "PIC CAN version %hhu.%hhu\n", 507 msg->soft_ver_major, msg->soft_ver_minor); 508 509 priv->can_ka_first_pass = false; 510 } 511 512 if (unlikely(priv->can_speed_check)) { 513 const u32 bitrate = convert_can2host_bitrate(msg); 514 515 priv->can_speed_check = false; 516 517 if (bitrate != priv->can.bittiming.bitrate) 518 netdev_err( 519 priv->netdev, 520 "Wrong bitrate reported by the device (%u). Expected %u", 521 bitrate, priv->can.bittiming.bitrate); 522 } 523 524 priv->bec.txerr = msg->tx_err_cnt; 525 priv->bec.rxerr = msg->rx_err_cnt; 526 527 if (msg->tx_bus_off) 528 priv->can.state = CAN_STATE_BUS_OFF; 529 530 else if ((priv->bec.txerr > MCBA_CAN_STATE_ERR_PSV_TH) || 531 (priv->bec.rxerr > MCBA_CAN_STATE_ERR_PSV_TH)) 532 priv->can.state = CAN_STATE_ERROR_PASSIVE; 533 534 else if ((priv->bec.txerr > MCBA_CAN_STATE_WRN_TH) || 535 (priv->bec.rxerr > MCBA_CAN_STATE_WRN_TH)) 536 priv->can.state = CAN_STATE_ERROR_WARNING; 537 } 538 539 static void mcba_usb_process_rx(struct mcba_priv *priv, 540 struct mcba_usb_msg *msg) 541 { 542 switch (msg->cmd_id) { 543 case MBCA_CMD_I_AM_ALIVE_FROM_CAN: 544 mcba_usb_process_ka_can(priv, 545 (struct mcba_usb_msg_ka_can *)msg); 546 break; 547 548 case MBCA_CMD_I_AM_ALIVE_FROM_USB: 549 mcba_usb_process_ka_usb(priv, 550 (struct mcba_usb_msg_ka_usb *)msg); 551 break; 552 553 case MBCA_CMD_RECEIVE_MESSAGE: 554 mcba_usb_process_can(priv, (struct mcba_usb_msg_can *)msg); 555 break; 556 557 case MBCA_CMD_NOTHING_TO_SEND: 558 /* Side effect of communication between PIC_USB and PIC_CAN. 559 * PIC_CAN is telling us that it has nothing to send 560 */ 561 break; 562 563 case MBCA_CMD_TRANSMIT_MESSAGE_RSP: 564 /* Transmission response from the device containing timestamp */ 565 break; 566 567 default: 568 netdev_warn(priv->netdev, "Unsupported msg (0x%hhX)", 569 msg->cmd_id); 570 break; 571 } 572 } 573 574 /* Callback for reading data from device 575 * 576 * Check urb status, call read function and resubmit urb read operation. 577 */ 578 static void mcba_usb_read_bulk_callback(struct urb *urb) 579 { 580 struct mcba_priv *priv = urb->context; 581 struct net_device *netdev; 582 int retval; 583 int pos = 0; 584 585 netdev = priv->netdev; 586 587 if (!netif_device_present(netdev)) 588 return; 589 590 switch (urb->status) { 591 case 0: /* success */ 592 break; 593 594 case -ENOENT: 595 case -ESHUTDOWN: 596 return; 597 598 default: 599 netdev_info(netdev, "Rx URB aborted (%d)\n", urb->status); 600 601 goto resubmit_urb; 602 } 603 604 while (pos < urb->actual_length) { 605 struct mcba_usb_msg *msg; 606 607 if (pos + sizeof(struct mcba_usb_msg) > urb->actual_length) { 608 netdev_err(priv->netdev, "format error\n"); 609 break; 610 } 611 612 msg = (struct mcba_usb_msg *)(urb->transfer_buffer + pos); 613 mcba_usb_process_rx(priv, msg); 614 615 pos += sizeof(struct mcba_usb_msg); 616 } 617 618 resubmit_urb: 619 620 usb_fill_bulk_urb(urb, priv->udev, 621 usb_rcvbulkpipe(priv->udev, MCBA_USB_EP_OUT), 622 urb->transfer_buffer, MCBA_USB_RX_BUFF_SIZE, 623 mcba_usb_read_bulk_callback, priv); 624 625 retval = usb_submit_urb(urb, GFP_ATOMIC); 626 627 if (retval == -ENODEV) 628 netif_device_detach(netdev); 629 else if (retval) 630 netdev_err(netdev, "failed resubmitting read bulk urb: %d\n", 631 retval); 632 } 633 634 /* Start USB device */ 635 static int mcba_usb_start(struct mcba_priv *priv) 636 { 637 struct net_device *netdev = priv->netdev; 638 int err, i; 639 640 mcba_init_ctx(priv); 641 642 for (i = 0; i < MCBA_MAX_RX_URBS; i++) { 643 struct urb *urb = NULL; 644 u8 *buf; 645 646 /* create a URB, and a buffer for it */ 647 urb = usb_alloc_urb(0, GFP_KERNEL); 648 if (!urb) { 649 err = -ENOMEM; 650 break; 651 } 652 653 buf = usb_alloc_coherent(priv->udev, MCBA_USB_RX_BUFF_SIZE, 654 GFP_KERNEL, &urb->transfer_dma); 655 if (!buf) { 656 netdev_err(netdev, "No memory left for USB buffer\n"); 657 usb_free_urb(urb); 658 err = -ENOMEM; 659 break; 660 } 661 662 usb_fill_bulk_urb(urb, priv->udev, 663 usb_rcvbulkpipe(priv->udev, MCBA_USB_EP_IN), 664 buf, MCBA_USB_RX_BUFF_SIZE, 665 mcba_usb_read_bulk_callback, priv); 666 urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; 667 usb_anchor_urb(urb, &priv->rx_submitted); 668 669 err = usb_submit_urb(urb, GFP_KERNEL); 670 if (err) { 671 usb_unanchor_urb(urb); 672 usb_free_coherent(priv->udev, MCBA_USB_RX_BUFF_SIZE, 673 buf, urb->transfer_dma); 674 usb_free_urb(urb); 675 break; 676 } 677 678 /* Drop reference, USB core will take care of freeing it */ 679 usb_free_urb(urb); 680 } 681 682 /* Did we submit any URBs */ 683 if (i == 0) { 684 netdev_warn(netdev, "couldn't setup read URBs\n"); 685 return err; 686 } 687 688 /* Warn if we've couldn't transmit all the URBs */ 689 if (i < MCBA_MAX_RX_URBS) 690 netdev_warn(netdev, "rx performance may be slow\n"); 691 692 mcba_usb_xmit_read_fw_ver(priv, MCBA_VER_REQ_USB); 693 mcba_usb_xmit_read_fw_ver(priv, MCBA_VER_REQ_CAN); 694 695 return err; 696 } 697 698 /* Open USB device */ 699 static int mcba_usb_open(struct net_device *netdev) 700 { 701 struct mcba_priv *priv = netdev_priv(netdev); 702 int err; 703 704 /* common open */ 705 err = open_candev(netdev); 706 if (err) 707 return err; 708 709 priv->can_speed_check = true; 710 priv->can.state = CAN_STATE_ERROR_ACTIVE; 711 712 can_led_event(netdev, CAN_LED_EVENT_OPEN); 713 netif_start_queue(netdev); 714 715 return 0; 716 } 717 718 static void mcba_urb_unlink(struct mcba_priv *priv) 719 { 720 usb_kill_anchored_urbs(&priv->rx_submitted); 721 usb_kill_anchored_urbs(&priv->tx_submitted); 722 } 723 724 /* Close USB device */ 725 static int mcba_usb_close(struct net_device *netdev) 726 { 727 struct mcba_priv *priv = netdev_priv(netdev); 728 729 priv->can.state = CAN_STATE_STOPPED; 730 731 netif_stop_queue(netdev); 732 733 /* Stop polling */ 734 mcba_urb_unlink(priv); 735 736 close_candev(netdev); 737 can_led_event(netdev, CAN_LED_EVENT_STOP); 738 739 return 0; 740 } 741 742 /* Set network device mode 743 * 744 * Maybe we should leave this function empty, because the device 745 * set mode variable with open command. 746 */ 747 static int mcba_net_set_mode(struct net_device *netdev, enum can_mode mode) 748 { 749 return 0; 750 } 751 752 static int mcba_net_get_berr_counter(const struct net_device *netdev, 753 struct can_berr_counter *bec) 754 { 755 struct mcba_priv *priv = netdev_priv(netdev); 756 757 bec->txerr = priv->bec.txerr; 758 bec->rxerr = priv->bec.rxerr; 759 760 return 0; 761 } 762 763 static const struct net_device_ops mcba_netdev_ops = { 764 .ndo_open = mcba_usb_open, 765 .ndo_stop = mcba_usb_close, 766 .ndo_start_xmit = mcba_usb_start_xmit, 767 }; 768 769 /* Microchip CANBUS has hardcoded bittiming values by default. 770 * This function sends request via USB to change the speed and align bittiming 771 * values for presentation purposes only 772 */ 773 static int mcba_net_set_bittiming(struct net_device *netdev) 774 { 775 struct mcba_priv *priv = netdev_priv(netdev); 776 const u16 bitrate_kbps = priv->can.bittiming.bitrate / 1000; 777 778 mcba_usb_xmit_change_bitrate(priv, bitrate_kbps); 779 780 return 0; 781 } 782 783 static int mcba_set_termination(struct net_device *netdev, u16 term) 784 { 785 struct mcba_priv *priv = netdev_priv(netdev); 786 struct mcba_usb_msg_termination usb_msg = { 787 .cmd_id = MBCA_CMD_SETUP_TERMINATION_RESISTANCE 788 }; 789 790 if (term == MCBA_TERMINATION_ENABLED) 791 usb_msg.termination = 1; 792 else 793 usb_msg.termination = 0; 794 795 mcba_usb_xmit_cmd(priv, (struct mcba_usb_msg *)&usb_msg); 796 797 return 0; 798 } 799 800 static int mcba_usb_probe(struct usb_interface *intf, 801 const struct usb_device_id *id) 802 { 803 struct net_device *netdev; 804 struct mcba_priv *priv; 805 int err = -ENOMEM; 806 struct usb_device *usbdev = interface_to_usbdev(intf); 807 808 netdev = alloc_candev(sizeof(struct mcba_priv), MCBA_MAX_TX_URBS); 809 if (!netdev) { 810 dev_err(&intf->dev, "Couldn't alloc candev\n"); 811 return -ENOMEM; 812 } 813 814 priv = netdev_priv(netdev); 815 816 priv->udev = usbdev; 817 priv->netdev = netdev; 818 priv->usb_ka_first_pass = true; 819 priv->can_ka_first_pass = true; 820 priv->can_speed_check = false; 821 822 init_usb_anchor(&priv->rx_submitted); 823 init_usb_anchor(&priv->tx_submitted); 824 825 usb_set_intfdata(intf, priv); 826 827 /* Init CAN device */ 828 priv->can.state = CAN_STATE_STOPPED; 829 priv->can.termination_const = mcba_termination; 830 priv->can.termination_const_cnt = ARRAY_SIZE(mcba_termination); 831 priv->can.bitrate_const = mcba_bitrate; 832 priv->can.bitrate_const_cnt = ARRAY_SIZE(mcba_bitrate); 833 834 priv->can.do_set_termination = mcba_set_termination; 835 priv->can.do_set_mode = mcba_net_set_mode; 836 priv->can.do_get_berr_counter = mcba_net_get_berr_counter; 837 priv->can.do_set_bittiming = mcba_net_set_bittiming; 838 839 netdev->netdev_ops = &mcba_netdev_ops; 840 841 netdev->flags |= IFF_ECHO; /* we support local echo */ 842 843 SET_NETDEV_DEV(netdev, &intf->dev); 844 845 err = register_candev(netdev); 846 if (err) { 847 netdev_err(netdev, "couldn't register CAN device: %d\n", err); 848 849 goto cleanup_free_candev; 850 } 851 852 devm_can_led_init(netdev); 853 854 /* Start USB dev only if we have successfully registered CAN device */ 855 err = mcba_usb_start(priv); 856 if (err) { 857 if (err == -ENODEV) 858 netif_device_detach(priv->netdev); 859 860 netdev_warn(netdev, "couldn't start device: %d\n", err); 861 862 goto cleanup_unregister_candev; 863 } 864 865 dev_info(&intf->dev, "Microchip CAN BUS analizer connected\n"); 866 867 return 0; 868 869 cleanup_unregister_candev: 870 unregister_candev(priv->netdev); 871 872 cleanup_free_candev: 873 free_candev(netdev); 874 875 return err; 876 } 877 878 /* Called by the usb core when driver is unloaded or device is removed */ 879 static void mcba_usb_disconnect(struct usb_interface *intf) 880 { 881 struct mcba_priv *priv = usb_get_intfdata(intf); 882 883 usb_set_intfdata(intf, NULL); 884 885 netdev_info(priv->netdev, "device disconnected\n"); 886 887 unregister_candev(priv->netdev); 888 free_candev(priv->netdev); 889 890 mcba_urb_unlink(priv); 891 } 892 893 static struct usb_driver mcba_usb_driver = { 894 .name = MCBA_MODULE_NAME, 895 .probe = mcba_usb_probe, 896 .disconnect = mcba_usb_disconnect, 897 .id_table = mcba_usb_table, 898 }; 899 900 module_usb_driver(mcba_usb_driver); 901 902 MODULE_AUTHOR("Remigiusz Kołłątaj <remigiusz.kollataj@mobica.com>"); 903 MODULE_DESCRIPTION("SocketCAN driver for Microchip CAN BUS Analyzer Tool"); 904 MODULE_LICENSE("GPL v2"); 905