1# SPDX-License-Identifier: GPL-2.0-only 2 3menuconfig CAN_SJA1000 4 tristate "Philips/NXP SJA1000 devices" 5 depends on HAS_IOMEM 6 7if CAN_SJA1000 8 9config CAN_EMS_PCI 10 tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card" 11 depends on PCI 12 ---help--- 13 This driver is for the one, two or four channel CPC-PCI, 14 CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche 15 (http://www.ems-wuensche.de). 16 17config CAN_EMS_PCMCIA 18 tristate "EMS CPC-CARD Card" 19 depends on PCMCIA 20 ---help--- 21 This driver is for the one or two channel CPC-CARD cards from 22 EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de). 23 24config CAN_KVASER_PCI 25 tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards" 26 depends on PCI 27 ---help--- 28 This driver is for the PCIcanx and PCIcan cards (1, 2 or 29 4 channel) from Kvaser (http://www.kvaser.com). 30 31config CAN_PEAK_PCI 32 tristate "PEAK PCAN-PCI/PCIe/miniPCI Cards" 33 depends on PCI 34 ---help--- 35 This driver is for the PCAN-PCI/PCIe/miniPCI cards 36 (1, 2, 3 or 4 channels) from PEAK-System Technik 37 (http://www.peak-system.com). 38 39config CAN_PEAK_PCIEC 40 bool "PEAK PCAN-ExpressCard Cards" 41 depends on CAN_PEAK_PCI 42 select I2C 43 select I2C_ALGOBIT 44 default y 45 ---help--- 46 Say Y here if you want to use a PCAN-ExpressCard from PEAK-System 47 Technik. This will also automatically select I2C and I2C_ALGO 48 configuration options. 49 50config CAN_PEAK_PCMCIA 51 tristate "PEAK PCAN-PC Card" 52 depends on PCMCIA 53 depends on HAS_IOPORT_MAP 54 ---help--- 55 This driver is for the PCAN-PC Card PCMCIA adapter (1 or 2 channels) 56 from PEAK-System (http://www.peak-system.com). To compile this 57 driver as a module, choose M here: the module will be called 58 peak_pcmcia. 59 60config CAN_PLX_PCI 61 tristate "PLX90xx PCI-bridge based Cards" 62 depends on PCI 63 ---help--- 64 This driver is for CAN interface cards based on 65 the PLX90xx PCI bridge. 66 Driver supports now: 67 - Adlink PCI-7841/cPCI-7841 card (http://www.adlinktech.com/) 68 - Adlink PCI-7841/cPCI-7841 SE card 69 - esd CAN-PCI/CPCI/PCI104/200 (http://www.esd.eu/) 70 - esd CAN-PCI/PMC/266 71 - esd CAN-PCIe/2000 72 - Marathon CAN-bus-PCI card (http://www.marathon.ru/) 73 - TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/) 74 - IXXAT Automation PC-I 04/PCI card (http://www.ixxat.com/) 75 - Connect Tech Inc. CANpro/104-Plus Opto (CRG001) card (http://www.connecttech.com) 76 - ASEM CAN raw - 2 isolated CAN channels (www.asem.it) 77 78config CAN_SJA1000_ISA 79 tristate "ISA Bus based legacy SJA1000 driver" 80 ---help--- 81 This driver adds legacy support for SJA1000 chips connected to 82 the ISA bus using I/O port, memory mapped or indirect access. 83 84config CAN_SJA1000_PLATFORM 85 tristate "Generic Platform Bus based SJA1000 driver" 86 ---help--- 87 This driver adds support for the SJA1000 chips connected to 88 the "platform bus" (Linux abstraction for directly to the 89 processor attached devices). Which can be found on various 90 boards from Phytec (http://www.phytec.de) like the PCM027, 91 PCM038. It also provides the OpenFirmware "platform bus" found 92 on embedded systems with OpenFirmware bindings, e.g. if you 93 have a PowerPC based system you may want to enable this option. 94 95config CAN_TSCAN1 96 tristate "TS-CAN1 PC104 boards" 97 depends on ISA 98 help 99 This driver is for Technologic Systems' TSCAN-1 PC104 boards. 100 http://www.embeddedarm.com/products/board-detail.php?product=TS-CAN1 101 The driver supports multiple boards and automatically configures them: 102 PLD IO base addresses are read from jumpers JP1 and JP2, 103 IRQ numbers are read from jumpers JP4 and JP5, 104 SJA1000 IO base addresses are chosen heuristically (first that works). 105 106endif 107