xref: /openbmc/linux/drivers/net/can/sja1000/Kconfig (revision 20c72589)
1# SPDX-License-Identifier: GPL-2.0-only
2
3menuconfig CAN_SJA1000
4	tristate "Philips/NXP SJA1000 devices"
5	depends on HAS_IOMEM
6
7if CAN_SJA1000
8
9config CAN_EMS_PCI
10	tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card"
11	depends on PCI
12	help
13	  This driver is for the one, two or four channel CPC-PCI,
14	  CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche
15	  (http://www.ems-wuensche.de).
16
17config CAN_EMS_PCMCIA
18	tristate "EMS CPC-CARD Card"
19	depends on PCMCIA
20	help
21	  This driver is for the one or two channel CPC-CARD cards from
22	  EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
23
24config CAN_F81601
25	tristate "Fintek F81601 PCIE to 2 CAN Controller"
26	depends on PCI
27	help
28	  This driver adds support for Fintek F81601 PCIE to 2 CAN
29	  Controller. It had internal 24MHz clock source, but it can
30	  be changed by manufacturer. Use modinfo to get usage for
31	  parameters. Visit http://www.fintek.com.tw to get more
32	  information.
33
34config CAN_KVASER_PCI
35	tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
36	depends on PCI
37	help
38	  This driver is for the PCIcanx and PCIcan cards (1, 2 or
39	  4 channel) from Kvaser (http://www.kvaser.com).
40
41config CAN_PEAK_PCI
42	tristate "PEAK PCAN-PCI/PCIe/miniPCI Cards"
43	depends on PCI
44	help
45	  This driver is for the PCAN-PCI/PCIe/miniPCI cards
46	  (1, 2, 3 or 4 channels) from PEAK-System Technik
47	  (http://www.peak-system.com).
48
49config CAN_PEAK_PCIEC
50	bool "PEAK PCAN-ExpressCard Cards"
51	depends on CAN_PEAK_PCI
52	select I2C
53	select I2C_ALGOBIT
54	default y
55	help
56	  Say Y here if you want to use a PCAN-ExpressCard from PEAK-System
57	  Technik. This will also automatically select I2C and I2C_ALGO
58	  configuration options.
59
60config CAN_PEAK_PCMCIA
61	tristate "PEAK PCAN-PC Card"
62	depends on PCMCIA
63	depends on HAS_IOPORT_MAP
64	help
65	  This driver is for the PCAN-PC Card PCMCIA adapter (1 or 2 channels)
66	  from PEAK-System (http://www.peak-system.com). To compile this
67	  driver as a module, choose M here: the module will be called
68	  peak_pcmcia.
69
70config CAN_PLX_PCI
71	tristate "PLX90xx PCI-bridge based Cards"
72	depends on PCI
73	help
74	  This driver is for CAN interface cards based on
75	  the PLX90xx PCI bridge.
76	  Driver supports now:
77	   - Adlink PCI-7841/cPCI-7841 card (http://www.adlinktech.com/)
78	   - Adlink PCI-7841/cPCI-7841 SE card
79	   - esd CAN-PCI/CPCI/PCI104/200 (http://www.esd.eu/)
80	   - esd CAN-PCI/PMC/266
81	   - esd CAN-PCIe/2000
82	   - Marathon CAN-bus-PCI card (http://www.marathon.ru/)
83	   - TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/)
84	   - IXXAT Automation PC-I 04/PCI card (http://www.ixxat.com/)
85	   - Connect Tech Inc. CANpro/104-Plus Opto (CRG001) card (http://www.connecttech.com)
86	   - ASEM CAN raw - 2 isolated CAN channels (www.asem.it)
87
88config CAN_SJA1000_ISA
89	tristate "ISA Bus based legacy SJA1000 driver"
90	help
91	  This driver adds legacy support for SJA1000 chips connected to
92	  the ISA bus using I/O port, memory mapped or indirect access.
93
94config CAN_SJA1000_PLATFORM
95	tristate "Generic Platform Bus based SJA1000 driver"
96	help
97	  This driver adds support for the SJA1000 chips connected to
98	  the "platform bus" (Linux abstraction for directly to the
99	  processor attached devices).  Which can be found on various
100	  boards from Phytec (http://www.phytec.de) like the PCM027,
101	  PCM038. It also provides the OpenFirmware "platform bus" found
102	  on embedded systems with OpenFirmware bindings, e.g. if you
103	  have a PowerPC based system you may want to enable this option.
104
105config CAN_TSCAN1
106	tristate "TS-CAN1 PC104 boards"
107	depends on ISA
108	help
109	  This driver is for Technologic Systems' TSCAN-1 PC104 boards.
110	  https://www.embeddedts.com/products/TS-CAN1
111	  The driver supports multiple boards and automatically configures them:
112	  PLD IO base addresses are read from jumpers JP1 and JP2,
113	  IRQ numbers are read from jumpers JP4 and JP5,
114	  SJA1000 IO base addresses are chosen heuristically (first that works).
115
116endif
117