1menuconfig CAN_SJA1000 2 tristate "Philips/NXP SJA1000 devices" 3 depends on CAN_DEV && HAS_IOMEM 4 5if CAN_SJA1000 6 7config CAN_SJA1000_ISA 8 tristate "ISA Bus based legacy SJA1000 driver" 9 depends on ISA 10 ---help--- 11 This driver adds legacy support for SJA1000 chips connected to 12 the ISA bus using I/O port, memory mapped or indirect access. 13 14config CAN_SJA1000_PLATFORM 15 tristate "Generic Platform Bus based SJA1000 driver" 16 ---help--- 17 This driver adds support for the SJA1000 chips connected to 18 the "platform bus" (Linux abstraction for directly to the 19 processor attached devices). Which can be found on various 20 boards from Phytec (http://www.phytec.de) like the PCM027, 21 PCM038. 22 23config CAN_SJA1000_OF_PLATFORM 24 tristate "Generic OF Platform Bus based SJA1000 driver" 25 depends on PPC_OF 26 ---help--- 27 This driver adds support for the SJA1000 chips connected to 28 the OpenFirmware "platform bus" found on embedded systems with 29 OpenFirmware bindings, e.g. if you have a PowerPC based system 30 you may want to enable this option. 31 32config CAN_EMS_PCI 33 tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card" 34 depends on PCI 35 ---help--- 36 This driver is for the one, two or four channel CPC-PCI, 37 CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche 38 (http://www.ems-wuensche.de). 39 40config CAN_KVASER_PCI 41 tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards" 42 depends on PCI 43 ---help--- 44 This driver is for the the PCIcanx and PCIcan cards (1, 2 or 45 4 channel) from Kvaser (http://www.kvaser.com). 46 47config CAN_PLX_PCI 48 tristate "PLX90xx PCI-bridge based Cards" 49 depends on PCI 50 ---help--- 51 This driver is for CAN interface cards based on 52 the PLX90xx PCI bridge. 53 Driver supports now: 54 - Adlink PCI-7841/cPCI-7841 card (http://www.adlinktech.com/) 55 - Adlink PCI-7841/cPCI-7841 SE card 56 - Marathon CAN-bus-PCI card (http://www.marathon.ru/) 57 - TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/) 58 59endif 60