1menuconfig CAN_SJA1000 2 tristate "Philips/NXP SJA1000 devices" 3 depends on CAN_DEV && HAS_IOMEM 4 5if CAN_SJA1000 6 7config CAN_SJA1000_ISA 8 tristate "ISA Bus based legacy SJA1000 driver" 9 ---help--- 10 This driver adds legacy support for SJA1000 chips connected to 11 the ISA bus using I/O port, memory mapped or indirect access. 12 13config CAN_SJA1000_PLATFORM 14 tristate "Generic Platform Bus based SJA1000 driver" 15 ---help--- 16 This driver adds support for the SJA1000 chips connected to 17 the "platform bus" (Linux abstraction for directly to the 18 processor attached devices). Which can be found on various 19 boards from Phytec (http://www.phytec.de) like the PCM027, 20 PCM038. 21 22config CAN_SJA1000_OF_PLATFORM 23 tristate "Generic OF Platform Bus based SJA1000 driver" 24 depends on PPC_OF 25 ---help--- 26 This driver adds support for the SJA1000 chips connected to 27 the OpenFirmware "platform bus" found on embedded systems with 28 OpenFirmware bindings, e.g. if you have a PowerPC based system 29 you may want to enable this option. 30 31config CAN_EMS_PCMCIA 32 tristate "EMS CPC-CARD Card" 33 depends on PCMCIA 34 ---help--- 35 This driver is for the one or two channel CPC-CARD cards from 36 EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de). 37 38config CAN_EMS_PCI 39 tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card" 40 depends on PCI 41 ---help--- 42 This driver is for the one, two or four channel CPC-PCI, 43 CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche 44 (http://www.ems-wuensche.de). 45 46config CAN_PEAK_PCI 47 tristate "PEAK PCAN PCI/PCIe Cards" 48 depends on PCI 49 ---help--- 50 This driver is for the PCAN PCI/PCIe cards (1, 2, 3 or 4 channels) 51 from PEAK Systems (http://www.peak-system.com). 52 53config CAN_KVASER_PCI 54 tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards" 55 depends on PCI 56 ---help--- 57 This driver is for the the PCIcanx and PCIcan cards (1, 2 or 58 4 channel) from Kvaser (http://www.kvaser.com). 59 60config CAN_PLX_PCI 61 tristate "PLX90xx PCI-bridge based Cards" 62 depends on PCI 63 ---help--- 64 This driver is for CAN interface cards based on 65 the PLX90xx PCI bridge. 66 Driver supports now: 67 - Adlink PCI-7841/cPCI-7841 card (http://www.adlinktech.com/) 68 - Adlink PCI-7841/cPCI-7841 SE card 69 - esd CAN-PCI/CPCI/PCI104/200 (http://www.esd.eu/) 70 - esd CAN-PCI/PMC/266 71 - esd CAN-PCIe/2000 72 - Marathon CAN-bus-PCI card (http://www.marathon.ru/) 73 - TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/) 74 75config CAN_TSCAN1 76 tristate "TS-CAN1 PC104 boards" 77 depends on ISA 78 help 79 This driver is for Technologic Systems' TSCAN-1 PC104 boards. 80 http://www.embeddedarm.com/products/board-detail.php?product=TS-CAN1 81 The driver supports multiple boards and automatically configures them: 82 PLD IO base addresses are read from jumpers JP1 and JP2, 83 IRQ numbers are read from jumpers JP4 and JP5, 84 SJA1000 IO base addresses are chosen heuristically (first that works). 85 86endif 87