1 /* 2 * Remote VUB300 SDIO/SDmem Host Controller Driver 3 * 4 * Copyright (C) 2010 Elan Digital Systems Limited 5 * 6 * based on USB Skeleton driver - 2.2 7 * 8 * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com) 9 * 10 * This program is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License as 12 * published by the Free Software Foundation, version 2 13 * 14 * VUB300: is a USB 2.0 client device with a single SDIO/SDmem/MMC slot 15 * Any SDIO/SDmem/MMC device plugged into the VUB300 will appear, 16 * by virtue of this driver, to have been plugged into a local 17 * SDIO host controller, similar to, say, a PCI Ricoh controller 18 * This is because this kernel device driver is both a USB 2.0 19 * client device driver AND an MMC host controller driver. Thus 20 * if there is an existing driver for the inserted SDIO/SDmem/MMC 21 * device then that driver will be used by the kernel to manage 22 * the device in exactly the same fashion as if it had been 23 * directly plugged into, say, a local pci bus Ricoh controller 24 * 25 * RANT: this driver was written using a display 128x48 - converting it 26 * to a line width of 80 makes it very difficult to support. In 27 * particular functions have been broken down into sub functions 28 * and the original meaningful names have been shortened into 29 * cryptic ones. 30 * The problem is that executing a fragment of code subject to 31 * two conditions means an indentation of 24, thus leaving only 32 * 56 characters for a C statement. And that is quite ridiculous! 33 * 34 * Data types: data passed to/from the VUB300 is fixed to a number of 35 * bits and driver data fields reflect that limit by using 36 * u8, u16, u32 37 */ 38 #include <linux/kernel.h> 39 #include <linux/errno.h> 40 #include <linux/init.h> 41 #include <linux/slab.h> 42 #include <linux/module.h> 43 #include <linux/kref.h> 44 #include <linux/uaccess.h> 45 #include <linux/usb.h> 46 #include <linux/mutex.h> 47 #include <linux/mmc/host.h> 48 #include <linux/mmc/card.h> 49 #include <linux/mmc/sdio_func.h> 50 #include <linux/mmc/sdio_ids.h> 51 #include <linux/workqueue.h> 52 #include <linux/ctype.h> 53 #include <linux/firmware.h> 54 #include <linux/scatterlist.h> 55 56 struct host_controller_info { 57 u8 info_size; 58 u16 firmware_version; 59 u8 number_of_ports; 60 } __packed; 61 62 #define FIRMWARE_BLOCK_BOUNDARY 1024 63 struct sd_command_header { 64 u8 header_size; 65 u8 header_type; 66 u8 port_number; 67 u8 command_type; /* Bit7 - Rd/Wr */ 68 u8 command_index; 69 u8 transfer_size[4]; /* ReadSize + ReadSize */ 70 u8 response_type; 71 u8 arguments[4]; 72 u8 block_count[2]; 73 u8 block_size[2]; 74 u8 block_boundary[2]; 75 u8 reserved[44]; /* to pad out to 64 bytes */ 76 } __packed; 77 78 struct sd_irqpoll_header { 79 u8 header_size; 80 u8 header_type; 81 u8 port_number; 82 u8 command_type; /* Bit7 - Rd/Wr */ 83 u8 padding[16]; /* don't ask why !! */ 84 u8 poll_timeout_msb; 85 u8 poll_timeout_lsb; 86 u8 reserved[42]; /* to pad out to 64 bytes */ 87 } __packed; 88 89 struct sd_common_header { 90 u8 header_size; 91 u8 header_type; 92 u8 port_number; 93 } __packed; 94 95 struct sd_response_header { 96 u8 header_size; 97 u8 header_type; 98 u8 port_number; 99 u8 command_type; 100 u8 command_index; 101 u8 command_response[0]; 102 } __packed; 103 104 struct sd_status_header { 105 u8 header_size; 106 u8 header_type; 107 u8 port_number; 108 u16 port_flags; 109 u32 sdio_clock; 110 u16 host_header_size; 111 u16 func_header_size; 112 u16 ctrl_header_size; 113 } __packed; 114 115 struct sd_error_header { 116 u8 header_size; 117 u8 header_type; 118 u8 port_number; 119 u8 error_code; 120 } __packed; 121 122 struct sd_interrupt_header { 123 u8 header_size; 124 u8 header_type; 125 u8 port_number; 126 } __packed; 127 128 struct offload_registers_access { 129 u8 command_byte[4]; 130 u8 Respond_Byte[4]; 131 } __packed; 132 133 #define INTERRUPT_REGISTER_ACCESSES 15 134 struct sd_offloaded_interrupt { 135 u8 header_size; 136 u8 header_type; 137 u8 port_number; 138 struct offload_registers_access reg[INTERRUPT_REGISTER_ACCESSES]; 139 } __packed; 140 141 struct sd_register_header { 142 u8 header_size; 143 u8 header_type; 144 u8 port_number; 145 u8 command_type; 146 u8 command_index; 147 u8 command_response[6]; 148 } __packed; 149 150 #define PIGGYBACK_REGISTER_ACCESSES 14 151 struct sd_offloaded_piggyback { 152 struct sd_register_header sdio; 153 struct offload_registers_access reg[PIGGYBACK_REGISTER_ACCESSES]; 154 } __packed; 155 156 union sd_response { 157 struct sd_common_header common; 158 struct sd_status_header status; 159 struct sd_error_header error; 160 struct sd_interrupt_header interrupt; 161 struct sd_response_header response; 162 struct sd_offloaded_interrupt irq; 163 struct sd_offloaded_piggyback pig; 164 } __packed; 165 166 union sd_command { 167 struct sd_command_header head; 168 struct sd_irqpoll_header poll; 169 } __packed; 170 171 enum SD_RESPONSE_TYPE { 172 SDRT_UNSPECIFIED = 0, 173 SDRT_NONE, 174 SDRT_1, 175 SDRT_1B, 176 SDRT_2, 177 SDRT_3, 178 SDRT_4, 179 SDRT_5, 180 SDRT_5B, 181 SDRT_6, 182 SDRT_7, 183 }; 184 185 #define RESPONSE_INTERRUPT 0x01 186 #define RESPONSE_ERROR 0x02 187 #define RESPONSE_STATUS 0x03 188 #define RESPONSE_IRQ_DISABLED 0x05 189 #define RESPONSE_IRQ_ENABLED 0x06 190 #define RESPONSE_PIGGYBACKED 0x07 191 #define RESPONSE_NO_INTERRUPT 0x08 192 #define RESPONSE_PIG_DISABLED 0x09 193 #define RESPONSE_PIG_ENABLED 0x0A 194 #define SD_ERROR_1BIT_TIMEOUT 0x01 195 #define SD_ERROR_4BIT_TIMEOUT 0x02 196 #define SD_ERROR_1BIT_CRC_WRONG 0x03 197 #define SD_ERROR_4BIT_CRC_WRONG 0x04 198 #define SD_ERROR_1BIT_CRC_ERROR 0x05 199 #define SD_ERROR_4BIT_CRC_ERROR 0x06 200 #define SD_ERROR_NO_CMD_ENDBIT 0x07 201 #define SD_ERROR_NO_1BIT_DATEND 0x08 202 #define SD_ERROR_NO_4BIT_DATEND 0x09 203 #define SD_ERROR_1BIT_UNEXPECTED_TIMEOUT 0x0A 204 #define SD_ERROR_4BIT_UNEXPECTED_TIMEOUT 0x0B 205 #define SD_ERROR_ILLEGAL_COMMAND 0x0C 206 #define SD_ERROR_NO_DEVICE 0x0D 207 #define SD_ERROR_TRANSFER_LENGTH 0x0E 208 #define SD_ERROR_1BIT_DATA_TIMEOUT 0x0F 209 #define SD_ERROR_4BIT_DATA_TIMEOUT 0x10 210 #define SD_ERROR_ILLEGAL_STATE 0x11 211 #define SD_ERROR_UNKNOWN_ERROR 0x12 212 #define SD_ERROR_RESERVED_ERROR 0x13 213 #define SD_ERROR_INVALID_FUNCTION 0x14 214 #define SD_ERROR_OUT_OF_RANGE 0x15 215 #define SD_ERROR_STAT_CMD 0x16 216 #define SD_ERROR_STAT_DATA 0x17 217 #define SD_ERROR_STAT_CMD_TIMEOUT 0x18 218 #define SD_ERROR_SDCRDY_STUCK 0x19 219 #define SD_ERROR_UNHANDLED 0x1A 220 #define SD_ERROR_OVERRUN 0x1B 221 #define SD_ERROR_PIO_TIMEOUT 0x1C 222 223 #define FUN(c) (0x000007 & (c->arg>>28)) 224 #define REG(c) (0x01FFFF & (c->arg>>9)) 225 226 static bool limit_speed_to_24_MHz; 227 module_param(limit_speed_to_24_MHz, bool, 0644); 228 MODULE_PARM_DESC(limit_speed_to_24_MHz, "Limit Max SDIO Clock Speed to 24 MHz"); 229 230 static bool pad_input_to_usb_pkt; 231 module_param(pad_input_to_usb_pkt, bool, 0644); 232 MODULE_PARM_DESC(pad_input_to_usb_pkt, 233 "Pad USB data input transfers to whole USB Packet"); 234 235 static bool disable_offload_processing; 236 module_param(disable_offload_processing, bool, 0644); 237 MODULE_PARM_DESC(disable_offload_processing, "Disable Offload Processing"); 238 239 static bool force_1_bit_data_xfers; 240 module_param(force_1_bit_data_xfers, bool, 0644); 241 MODULE_PARM_DESC(force_1_bit_data_xfers, 242 "Force SDIO Data Transfers to 1-bit Mode"); 243 244 static bool force_polling_for_irqs; 245 module_param(force_polling_for_irqs, bool, 0644); 246 MODULE_PARM_DESC(force_polling_for_irqs, "Force Polling for SDIO interrupts"); 247 248 static int firmware_irqpoll_timeout = 1024; 249 module_param(firmware_irqpoll_timeout, int, 0644); 250 MODULE_PARM_DESC(firmware_irqpoll_timeout, "VUB300 firmware irqpoll timeout"); 251 252 static int force_max_req_size = 128; 253 module_param(force_max_req_size, int, 0644); 254 MODULE_PARM_DESC(force_max_req_size, "set max request size in kBytes"); 255 256 #ifdef SMSC_DEVELOPMENT_BOARD 257 static int firmware_rom_wait_states = 0x04; 258 #else 259 static int firmware_rom_wait_states = 0x1C; 260 #endif 261 262 module_param(firmware_rom_wait_states, int, 0644); 263 MODULE_PARM_DESC(firmware_rom_wait_states, 264 "ROM wait states byte=RRRIIEEE (Reserved Internal External)"); 265 266 #define ELAN_VENDOR_ID 0x2201 267 #define VUB300_VENDOR_ID 0x0424 268 #define VUB300_PRODUCT_ID 0x012C 269 static struct usb_device_id vub300_table[] = { 270 {USB_DEVICE(ELAN_VENDOR_ID, VUB300_PRODUCT_ID)}, 271 {USB_DEVICE(VUB300_VENDOR_ID, VUB300_PRODUCT_ID)}, 272 {} /* Terminating entry */ 273 }; 274 MODULE_DEVICE_TABLE(usb, vub300_table); 275 276 static struct workqueue_struct *cmndworkqueue; 277 static struct workqueue_struct *pollworkqueue; 278 static struct workqueue_struct *deadworkqueue; 279 280 static inline int interface_to_InterfaceNumber(struct usb_interface *interface) 281 { 282 if (!interface) 283 return -1; 284 if (!interface->cur_altsetting) 285 return -1; 286 return interface->cur_altsetting->desc.bInterfaceNumber; 287 } 288 289 struct sdio_register { 290 unsigned func_num:3; 291 unsigned sdio_reg:17; 292 unsigned activate:1; 293 unsigned prepared:1; 294 unsigned regvalue:8; 295 unsigned response:8; 296 unsigned sparebit:26; 297 }; 298 299 struct vub300_mmc_host { 300 struct usb_device *udev; 301 struct usb_interface *interface; 302 struct kref kref; 303 struct mutex cmd_mutex; 304 struct mutex irq_mutex; 305 char vub_name[3 + (9 * 8) + 4 + 1]; /* max of 7 sdio fn's */ 306 u8 cmnd_out_ep; /* EndPoint for commands */ 307 u8 cmnd_res_ep; /* EndPoint for responses */ 308 u8 data_out_ep; /* EndPoint for out data */ 309 u8 data_inp_ep; /* EndPoint for inp data */ 310 bool card_powered; 311 bool card_present; 312 bool read_only; 313 bool large_usb_packets; 314 bool app_spec; /* ApplicationSpecific */ 315 bool irq_enabled; /* by the MMC CORE */ 316 bool irq_disabled; /* in the firmware */ 317 unsigned bus_width:4; 318 u8 total_offload_count; 319 u8 dynamic_register_count; 320 u8 resp_len; 321 u32 datasize; 322 int errors; 323 int usb_transport_fail; 324 int usb_timed_out; 325 int irqs_queued; 326 struct sdio_register sdio_register[16]; 327 struct offload_interrupt_function_register { 328 #define MAXREGBITS 4 329 #define MAXREGS (1<<MAXREGBITS) 330 #define MAXREGMASK (MAXREGS-1) 331 u8 offload_count; 332 u32 offload_point; 333 struct offload_registers_access reg[MAXREGS]; 334 } fn[8]; 335 u16 fbs[8]; /* Function Block Size */ 336 struct mmc_command *cmd; 337 struct mmc_request *req; 338 struct mmc_data *data; 339 struct mmc_host *mmc; 340 struct urb *urb; 341 struct urb *command_out_urb; 342 struct urb *command_res_urb; 343 struct completion command_complete; 344 struct completion irqpoll_complete; 345 union sd_command cmnd; 346 union sd_response resp; 347 struct timer_list sg_transfer_timer; 348 struct usb_sg_request sg_request; 349 struct timer_list inactivity_timer; 350 struct work_struct deadwork; 351 struct work_struct cmndwork; 352 struct delayed_work pollwork; 353 struct host_controller_info hc_info; 354 struct sd_status_header system_port_status; 355 u8 padded_buffer[64]; 356 }; 357 358 #define kref_to_vub300_mmc_host(d) container_of(d, struct vub300_mmc_host, kref) 359 #define SET_TRANSFER_PSEUDOCODE 21 360 #define SET_INTERRUPT_PSEUDOCODE 20 361 #define SET_FAILURE_MODE 18 362 #define SET_ROM_WAIT_STATES 16 363 #define SET_IRQ_ENABLE 13 364 #define SET_CLOCK_SPEED 11 365 #define SET_FUNCTION_BLOCK_SIZE 9 366 #define SET_SD_DATA_MODE 6 367 #define SET_SD_POWER 4 368 #define ENTER_DFU_MODE 3 369 #define GET_HC_INF0 1 370 #define GET_SYSTEM_PORT_STATUS 0 371 372 static void vub300_delete(struct kref *kref) 373 { /* kref callback - softirq */ 374 struct vub300_mmc_host *vub300 = kref_to_vub300_mmc_host(kref); 375 struct mmc_host *mmc = vub300->mmc; 376 usb_free_urb(vub300->command_out_urb); 377 vub300->command_out_urb = NULL; 378 usb_free_urb(vub300->command_res_urb); 379 vub300->command_res_urb = NULL; 380 usb_put_dev(vub300->udev); 381 mmc_free_host(mmc); 382 /* 383 * and hence also frees vub300 384 * which is contained at the end of struct mmc 385 */ 386 } 387 388 static void vub300_queue_cmnd_work(struct vub300_mmc_host *vub300) 389 { 390 kref_get(&vub300->kref); 391 if (queue_work(cmndworkqueue, &vub300->cmndwork)) { 392 /* 393 * then the cmndworkqueue was not previously 394 * running and the above get ref is obvious 395 * required and will be put when the thread 396 * terminates by a specific call 397 */ 398 } else { 399 /* 400 * the cmndworkqueue was already running from 401 * a previous invocation and thus to keep the 402 * kref counts correct we must undo the get 403 */ 404 kref_put(&vub300->kref, vub300_delete); 405 } 406 } 407 408 static void vub300_queue_poll_work(struct vub300_mmc_host *vub300, int delay) 409 { 410 kref_get(&vub300->kref); 411 if (queue_delayed_work(pollworkqueue, &vub300->pollwork, delay)) { 412 /* 413 * then the pollworkqueue was not previously 414 * running and the above get ref is obvious 415 * required and will be put when the thread 416 * terminates by a specific call 417 */ 418 } else { 419 /* 420 * the pollworkqueue was already running from 421 * a previous invocation and thus to keep the 422 * kref counts correct we must undo the get 423 */ 424 kref_put(&vub300->kref, vub300_delete); 425 } 426 } 427 428 static void vub300_queue_dead_work(struct vub300_mmc_host *vub300) 429 { 430 kref_get(&vub300->kref); 431 if (queue_work(deadworkqueue, &vub300->deadwork)) { 432 /* 433 * then the deadworkqueue was not previously 434 * running and the above get ref is obvious 435 * required and will be put when the thread 436 * terminates by a specific call 437 */ 438 } else { 439 /* 440 * the deadworkqueue was already running from 441 * a previous invocation and thus to keep the 442 * kref counts correct we must undo the get 443 */ 444 kref_put(&vub300->kref, vub300_delete); 445 } 446 } 447 448 static void irqpoll_res_completed(struct urb *urb) 449 { /* urb completion handler - hardirq */ 450 struct vub300_mmc_host *vub300 = (struct vub300_mmc_host *)urb->context; 451 if (urb->status) 452 vub300->usb_transport_fail = urb->status; 453 complete(&vub300->irqpoll_complete); 454 } 455 456 static void irqpoll_out_completed(struct urb *urb) 457 { /* urb completion handler - hardirq */ 458 struct vub300_mmc_host *vub300 = (struct vub300_mmc_host *)urb->context; 459 if (urb->status) { 460 vub300->usb_transport_fail = urb->status; 461 complete(&vub300->irqpoll_complete); 462 return; 463 } else { 464 int ret; 465 unsigned int pipe = 466 usb_rcvbulkpipe(vub300->udev, vub300->cmnd_res_ep); 467 usb_fill_bulk_urb(vub300->command_res_urb, vub300->udev, pipe, 468 &vub300->resp, sizeof(vub300->resp), 469 irqpoll_res_completed, vub300); 470 vub300->command_res_urb->actual_length = 0; 471 ret = usb_submit_urb(vub300->command_res_urb, GFP_ATOMIC); 472 if (ret) { 473 vub300->usb_transport_fail = ret; 474 complete(&vub300->irqpoll_complete); 475 } 476 return; 477 } 478 } 479 480 static void send_irqpoll(struct vub300_mmc_host *vub300) 481 { 482 /* cmd_mutex is held by vub300_pollwork_thread */ 483 int retval; 484 int timeout = 0xFFFF & (0x0001FFFF - firmware_irqpoll_timeout); 485 vub300->cmnd.poll.header_size = 22; 486 vub300->cmnd.poll.header_type = 1; 487 vub300->cmnd.poll.port_number = 0; 488 vub300->cmnd.poll.command_type = 2; 489 vub300->cmnd.poll.poll_timeout_lsb = 0xFF & (unsigned)timeout; 490 vub300->cmnd.poll.poll_timeout_msb = 0xFF & (unsigned)(timeout >> 8); 491 usb_fill_bulk_urb(vub300->command_out_urb, vub300->udev, 492 usb_sndbulkpipe(vub300->udev, vub300->cmnd_out_ep) 493 , &vub300->cmnd, sizeof(vub300->cmnd) 494 , irqpoll_out_completed, vub300); 495 retval = usb_submit_urb(vub300->command_out_urb, GFP_KERNEL); 496 if (0 > retval) { 497 vub300->usb_transport_fail = retval; 498 vub300_queue_poll_work(vub300, 1); 499 complete(&vub300->irqpoll_complete); 500 return; 501 } else { 502 return; 503 } 504 } 505 506 static void new_system_port_status(struct vub300_mmc_host *vub300) 507 { 508 int old_card_present = vub300->card_present; 509 int new_card_present = 510 (0x0001 & vub300->system_port_status.port_flags) ? 1 : 0; 511 vub300->read_only = 512 (0x0010 & vub300->system_port_status.port_flags) ? 1 : 0; 513 if (new_card_present && !old_card_present) { 514 dev_info(&vub300->udev->dev, "card just inserted\n"); 515 vub300->card_present = 1; 516 vub300->bus_width = 0; 517 if (disable_offload_processing) 518 strncpy(vub300->vub_name, "EMPTY Processing Disabled", 519 sizeof(vub300->vub_name)); 520 else 521 vub300->vub_name[0] = 0; 522 mmc_detect_change(vub300->mmc, 1); 523 } else if (!new_card_present && old_card_present) { 524 dev_info(&vub300->udev->dev, "card just ejected\n"); 525 vub300->card_present = 0; 526 mmc_detect_change(vub300->mmc, 0); 527 } else { 528 /* no change */ 529 } 530 } 531 532 static void __add_offloaded_reg_to_fifo(struct vub300_mmc_host *vub300, 533 struct offload_registers_access 534 *register_access, u8 func) 535 { 536 u8 r = vub300->fn[func].offload_point + vub300->fn[func].offload_count; 537 memcpy(&vub300->fn[func].reg[MAXREGMASK & r], register_access, 538 sizeof(struct offload_registers_access)); 539 vub300->fn[func].offload_count += 1; 540 vub300->total_offload_count += 1; 541 } 542 543 static void add_offloaded_reg(struct vub300_mmc_host *vub300, 544 struct offload_registers_access *register_access) 545 { 546 u32 Register = ((0x03 & register_access->command_byte[0]) << 15) 547 | ((0xFF & register_access->command_byte[1]) << 7) 548 | ((0xFE & register_access->command_byte[2]) >> 1); 549 u8 func = ((0x70 & register_access->command_byte[0]) >> 4); 550 u8 regs = vub300->dynamic_register_count; 551 u8 i = 0; 552 while (0 < regs-- && 1 == vub300->sdio_register[i].activate) { 553 if (vub300->sdio_register[i].func_num == func && 554 vub300->sdio_register[i].sdio_reg == Register) { 555 if (vub300->sdio_register[i].prepared == 0) 556 vub300->sdio_register[i].prepared = 1; 557 vub300->sdio_register[i].response = 558 register_access->Respond_Byte[2]; 559 vub300->sdio_register[i].regvalue = 560 register_access->Respond_Byte[3]; 561 return; 562 } else { 563 i += 1; 564 continue; 565 } 566 } 567 __add_offloaded_reg_to_fifo(vub300, register_access, func); 568 } 569 570 static void check_vub300_port_status(struct vub300_mmc_host *vub300) 571 { 572 /* 573 * cmd_mutex is held by vub300_pollwork_thread, 574 * vub300_deadwork_thread or vub300_cmndwork_thread 575 */ 576 int retval; 577 retval = 578 usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0), 579 GET_SYSTEM_PORT_STATUS, 580 USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 581 0x0000, 0x0000, &vub300->system_port_status, 582 sizeof(vub300->system_port_status), HZ); 583 if (sizeof(vub300->system_port_status) == retval) 584 new_system_port_status(vub300); 585 } 586 587 static void __vub300_irqpoll_response(struct vub300_mmc_host *vub300) 588 { 589 /* cmd_mutex is held by vub300_pollwork_thread */ 590 if (vub300->command_res_urb->actual_length == 0) 591 return; 592 593 switch (vub300->resp.common.header_type) { 594 case RESPONSE_INTERRUPT: 595 mutex_lock(&vub300->irq_mutex); 596 if (vub300->irq_enabled) 597 mmc_signal_sdio_irq(vub300->mmc); 598 else 599 vub300->irqs_queued += 1; 600 vub300->irq_disabled = 1; 601 mutex_unlock(&vub300->irq_mutex); 602 break; 603 case RESPONSE_ERROR: 604 if (vub300->resp.error.error_code == SD_ERROR_NO_DEVICE) 605 check_vub300_port_status(vub300); 606 break; 607 case RESPONSE_STATUS: 608 vub300->system_port_status = vub300->resp.status; 609 new_system_port_status(vub300); 610 if (!vub300->card_present) 611 vub300_queue_poll_work(vub300, HZ / 5); 612 break; 613 case RESPONSE_IRQ_DISABLED: 614 { 615 int offloaded_data_length = vub300->resp.common.header_size - 3; 616 int register_count = offloaded_data_length >> 3; 617 int ri = 0; 618 while (register_count--) { 619 add_offloaded_reg(vub300, &vub300->resp.irq.reg[ri]); 620 ri += 1; 621 } 622 mutex_lock(&vub300->irq_mutex); 623 if (vub300->irq_enabled) 624 mmc_signal_sdio_irq(vub300->mmc); 625 else 626 vub300->irqs_queued += 1; 627 vub300->irq_disabled = 1; 628 mutex_unlock(&vub300->irq_mutex); 629 break; 630 } 631 case RESPONSE_IRQ_ENABLED: 632 { 633 int offloaded_data_length = vub300->resp.common.header_size - 3; 634 int register_count = offloaded_data_length >> 3; 635 int ri = 0; 636 while (register_count--) { 637 add_offloaded_reg(vub300, &vub300->resp.irq.reg[ri]); 638 ri += 1; 639 } 640 mutex_lock(&vub300->irq_mutex); 641 if (vub300->irq_enabled) 642 mmc_signal_sdio_irq(vub300->mmc); 643 else 644 vub300->irqs_queued += 1; 645 vub300->irq_disabled = 0; 646 mutex_unlock(&vub300->irq_mutex); 647 break; 648 } 649 case RESPONSE_NO_INTERRUPT: 650 vub300_queue_poll_work(vub300, 1); 651 break; 652 default: 653 break; 654 } 655 } 656 657 static void __do_poll(struct vub300_mmc_host *vub300) 658 { 659 /* cmd_mutex is held by vub300_pollwork_thread */ 660 unsigned long commretval; 661 mod_timer(&vub300->inactivity_timer, jiffies + HZ); 662 init_completion(&vub300->irqpoll_complete); 663 send_irqpoll(vub300); 664 commretval = wait_for_completion_timeout(&vub300->irqpoll_complete, 665 msecs_to_jiffies(500)); 666 if (vub300->usb_transport_fail) { 667 /* no need to do anything */ 668 } else if (commretval == 0) { 669 vub300->usb_timed_out = 1; 670 usb_kill_urb(vub300->command_out_urb); 671 usb_kill_urb(vub300->command_res_urb); 672 } else { /* commretval > 0 */ 673 __vub300_irqpoll_response(vub300); 674 } 675 } 676 677 /* this thread runs only when the driver 678 * is trying to poll the device for an IRQ 679 */ 680 static void vub300_pollwork_thread(struct work_struct *work) 681 { /* NOT irq */ 682 struct vub300_mmc_host *vub300 = container_of(work, 683 struct vub300_mmc_host, pollwork.work); 684 if (!vub300->interface) { 685 kref_put(&vub300->kref, vub300_delete); 686 return; 687 } 688 mutex_lock(&vub300->cmd_mutex); 689 if (vub300->cmd) { 690 vub300_queue_poll_work(vub300, 1); 691 } else if (!vub300->card_present) { 692 /* no need to do anything */ 693 } else { /* vub300->card_present */ 694 mutex_lock(&vub300->irq_mutex); 695 if (!vub300->irq_enabled) { 696 mutex_unlock(&vub300->irq_mutex); 697 } else if (vub300->irqs_queued) { 698 vub300->irqs_queued -= 1; 699 mmc_signal_sdio_irq(vub300->mmc); 700 mod_timer(&vub300->inactivity_timer, jiffies + HZ); 701 mutex_unlock(&vub300->irq_mutex); 702 } else { /* NOT vub300->irqs_queued */ 703 mutex_unlock(&vub300->irq_mutex); 704 __do_poll(vub300); 705 } 706 } 707 mutex_unlock(&vub300->cmd_mutex); 708 kref_put(&vub300->kref, vub300_delete); 709 } 710 711 static void vub300_deadwork_thread(struct work_struct *work) 712 { /* NOT irq */ 713 struct vub300_mmc_host *vub300 = 714 container_of(work, struct vub300_mmc_host, deadwork); 715 if (!vub300->interface) { 716 kref_put(&vub300->kref, vub300_delete); 717 return; 718 } 719 mutex_lock(&vub300->cmd_mutex); 720 if (vub300->cmd) { 721 /* 722 * a command got in as the inactivity 723 * timer expired - so we just let the 724 * processing of the command show if 725 * the device is dead 726 */ 727 } else if (vub300->card_present) { 728 check_vub300_port_status(vub300); 729 } else if (vub300->mmc && vub300->mmc->card) { 730 /* 731 * the MMC core must not have responded 732 * to the previous indication - lets 733 * hope that it eventually does so we 734 * will just ignore this for now 735 */ 736 } else { 737 check_vub300_port_status(vub300); 738 } 739 mod_timer(&vub300->inactivity_timer, jiffies + HZ); 740 mutex_unlock(&vub300->cmd_mutex); 741 kref_put(&vub300->kref, vub300_delete); 742 } 743 744 static void vub300_inactivity_timer_expired(unsigned long data) 745 { /* softirq */ 746 struct vub300_mmc_host *vub300 = (struct vub300_mmc_host *)data; 747 if (!vub300->interface) { 748 kref_put(&vub300->kref, vub300_delete); 749 } else if (vub300->cmd) { 750 mod_timer(&vub300->inactivity_timer, jiffies + HZ); 751 } else { 752 vub300_queue_dead_work(vub300); 753 mod_timer(&vub300->inactivity_timer, jiffies + HZ); 754 } 755 } 756 757 static int vub300_response_error(u8 error_code) 758 { 759 switch (error_code) { 760 case SD_ERROR_PIO_TIMEOUT: 761 case SD_ERROR_1BIT_TIMEOUT: 762 case SD_ERROR_4BIT_TIMEOUT: 763 return -ETIMEDOUT; 764 case SD_ERROR_STAT_DATA: 765 case SD_ERROR_OVERRUN: 766 case SD_ERROR_STAT_CMD: 767 case SD_ERROR_STAT_CMD_TIMEOUT: 768 case SD_ERROR_SDCRDY_STUCK: 769 case SD_ERROR_UNHANDLED: 770 case SD_ERROR_1BIT_CRC_WRONG: 771 case SD_ERROR_4BIT_CRC_WRONG: 772 case SD_ERROR_1BIT_CRC_ERROR: 773 case SD_ERROR_4BIT_CRC_ERROR: 774 case SD_ERROR_NO_CMD_ENDBIT: 775 case SD_ERROR_NO_1BIT_DATEND: 776 case SD_ERROR_NO_4BIT_DATEND: 777 case SD_ERROR_1BIT_DATA_TIMEOUT: 778 case SD_ERROR_4BIT_DATA_TIMEOUT: 779 case SD_ERROR_1BIT_UNEXPECTED_TIMEOUT: 780 case SD_ERROR_4BIT_UNEXPECTED_TIMEOUT: 781 return -EILSEQ; 782 case 33: 783 return -EILSEQ; 784 case SD_ERROR_ILLEGAL_COMMAND: 785 return -EINVAL; 786 case SD_ERROR_NO_DEVICE: 787 return -ENOMEDIUM; 788 default: 789 return -ENODEV; 790 } 791 } 792 793 static void command_res_completed(struct urb *urb) 794 { /* urb completion handler - hardirq */ 795 struct vub300_mmc_host *vub300 = (struct vub300_mmc_host *)urb->context; 796 if (urb->status) { 797 /* we have to let the initiator handle the error */ 798 } else if (vub300->command_res_urb->actual_length == 0) { 799 /* 800 * we have seen this happen once or twice and 801 * we suspect a buggy USB host controller 802 */ 803 } else if (!vub300->data) { 804 /* this means that the command (typically CMD52) succeeded */ 805 } else if (vub300->resp.common.header_type != 0x02) { 806 /* 807 * this is an error response from the VUB300 chip 808 * and we let the initiator handle it 809 */ 810 } else if (vub300->urb) { 811 vub300->cmd->error = 812 vub300_response_error(vub300->resp.error.error_code); 813 usb_unlink_urb(vub300->urb); 814 } else { 815 vub300->cmd->error = 816 vub300_response_error(vub300->resp.error.error_code); 817 usb_sg_cancel(&vub300->sg_request); 818 } 819 complete(&vub300->command_complete); /* got_response_in */ 820 } 821 822 static void command_out_completed(struct urb *urb) 823 { /* urb completion handler - hardirq */ 824 struct vub300_mmc_host *vub300 = (struct vub300_mmc_host *)urb->context; 825 if (urb->status) { 826 complete(&vub300->command_complete); 827 } else { 828 int ret; 829 unsigned int pipe = 830 usb_rcvbulkpipe(vub300->udev, vub300->cmnd_res_ep); 831 usb_fill_bulk_urb(vub300->command_res_urb, vub300->udev, pipe, 832 &vub300->resp, sizeof(vub300->resp), 833 command_res_completed, vub300); 834 vub300->command_res_urb->actual_length = 0; 835 ret = usb_submit_urb(vub300->command_res_urb, GFP_ATOMIC); 836 if (ret == 0) { 837 /* 838 * the urb completion handler will call 839 * our completion handler 840 */ 841 } else { 842 /* 843 * and thus we only call it directly 844 * when it will not be called 845 */ 846 complete(&vub300->command_complete); 847 } 848 } 849 } 850 851 /* 852 * the STUFF bits are masked out for the comparisons 853 */ 854 static void snoop_block_size_and_bus_width(struct vub300_mmc_host *vub300, 855 u32 cmd_arg) 856 { 857 if ((0xFBFFFE00 & cmd_arg) == 0x80022200) 858 vub300->fbs[1] = (cmd_arg << 8) | (0x00FF & vub300->fbs[1]); 859 else if ((0xFBFFFE00 & cmd_arg) == 0x80022000) 860 vub300->fbs[1] = (0xFF & cmd_arg) | (0xFF00 & vub300->fbs[1]); 861 else if ((0xFBFFFE00 & cmd_arg) == 0x80042200) 862 vub300->fbs[2] = (cmd_arg << 8) | (0x00FF & vub300->fbs[2]); 863 else if ((0xFBFFFE00 & cmd_arg) == 0x80042000) 864 vub300->fbs[2] = (0xFF & cmd_arg) | (0xFF00 & vub300->fbs[2]); 865 else if ((0xFBFFFE00 & cmd_arg) == 0x80062200) 866 vub300->fbs[3] = (cmd_arg << 8) | (0x00FF & vub300->fbs[3]); 867 else if ((0xFBFFFE00 & cmd_arg) == 0x80062000) 868 vub300->fbs[3] = (0xFF & cmd_arg) | (0xFF00 & vub300->fbs[3]); 869 else if ((0xFBFFFE00 & cmd_arg) == 0x80082200) 870 vub300->fbs[4] = (cmd_arg << 8) | (0x00FF & vub300->fbs[4]); 871 else if ((0xFBFFFE00 & cmd_arg) == 0x80082000) 872 vub300->fbs[4] = (0xFF & cmd_arg) | (0xFF00 & vub300->fbs[4]); 873 else if ((0xFBFFFE00 & cmd_arg) == 0x800A2200) 874 vub300->fbs[5] = (cmd_arg << 8) | (0x00FF & vub300->fbs[5]); 875 else if ((0xFBFFFE00 & cmd_arg) == 0x800A2000) 876 vub300->fbs[5] = (0xFF & cmd_arg) | (0xFF00 & vub300->fbs[5]); 877 else if ((0xFBFFFE00 & cmd_arg) == 0x800C2200) 878 vub300->fbs[6] = (cmd_arg << 8) | (0x00FF & vub300->fbs[6]); 879 else if ((0xFBFFFE00 & cmd_arg) == 0x800C2000) 880 vub300->fbs[6] = (0xFF & cmd_arg) | (0xFF00 & vub300->fbs[6]); 881 else if ((0xFBFFFE00 & cmd_arg) == 0x800E2200) 882 vub300->fbs[7] = (cmd_arg << 8) | (0x00FF & vub300->fbs[7]); 883 else if ((0xFBFFFE00 & cmd_arg) == 0x800E2000) 884 vub300->fbs[7] = (0xFF & cmd_arg) | (0xFF00 & vub300->fbs[7]); 885 else if ((0xFBFFFE03 & cmd_arg) == 0x80000E00) 886 vub300->bus_width = 1; 887 else if ((0xFBFFFE03 & cmd_arg) == 0x80000E02) 888 vub300->bus_width = 4; 889 } 890 891 static void send_command(struct vub300_mmc_host *vub300) 892 { 893 /* cmd_mutex is held by vub300_cmndwork_thread */ 894 struct mmc_command *cmd = vub300->cmd; 895 struct mmc_data *data = vub300->data; 896 int retval; 897 int i; 898 u8 response_type; 899 if (vub300->app_spec) { 900 switch (cmd->opcode) { 901 case 6: 902 response_type = SDRT_1; 903 vub300->resp_len = 6; 904 if (0x00000000 == (0x00000003 & cmd->arg)) 905 vub300->bus_width = 1; 906 else if (0x00000002 == (0x00000003 & cmd->arg)) 907 vub300->bus_width = 4; 908 else 909 dev_err(&vub300->udev->dev, 910 "unexpected ACMD6 bus_width=%d\n", 911 0x00000003 & cmd->arg); 912 break; 913 case 13: 914 response_type = SDRT_1; 915 vub300->resp_len = 6; 916 break; 917 case 22: 918 response_type = SDRT_1; 919 vub300->resp_len = 6; 920 break; 921 case 23: 922 response_type = SDRT_1; 923 vub300->resp_len = 6; 924 break; 925 case 41: 926 response_type = SDRT_3; 927 vub300->resp_len = 6; 928 break; 929 case 42: 930 response_type = SDRT_1; 931 vub300->resp_len = 6; 932 break; 933 case 51: 934 response_type = SDRT_1; 935 vub300->resp_len = 6; 936 break; 937 case 55: 938 response_type = SDRT_1; 939 vub300->resp_len = 6; 940 break; 941 default: 942 vub300->resp_len = 0; 943 cmd->error = -EINVAL; 944 complete(&vub300->command_complete); 945 return; 946 } 947 vub300->app_spec = 0; 948 } else { 949 switch (cmd->opcode) { 950 case 0: 951 response_type = SDRT_NONE; 952 vub300->resp_len = 0; 953 break; 954 case 1: 955 response_type = SDRT_3; 956 vub300->resp_len = 6; 957 break; 958 case 2: 959 response_type = SDRT_2; 960 vub300->resp_len = 17; 961 break; 962 case 3: 963 response_type = SDRT_6; 964 vub300->resp_len = 6; 965 break; 966 case 4: 967 response_type = SDRT_NONE; 968 vub300->resp_len = 0; 969 break; 970 case 5: 971 response_type = SDRT_4; 972 vub300->resp_len = 6; 973 break; 974 case 6: 975 response_type = SDRT_1; 976 vub300->resp_len = 6; 977 break; 978 case 7: 979 response_type = SDRT_1B; 980 vub300->resp_len = 6; 981 break; 982 case 8: 983 response_type = SDRT_7; 984 vub300->resp_len = 6; 985 break; 986 case 9: 987 response_type = SDRT_2; 988 vub300->resp_len = 17; 989 break; 990 case 10: 991 response_type = SDRT_2; 992 vub300->resp_len = 17; 993 break; 994 case 12: 995 response_type = SDRT_1B; 996 vub300->resp_len = 6; 997 break; 998 case 13: 999 response_type = SDRT_1; 1000 vub300->resp_len = 6; 1001 break; 1002 case 15: 1003 response_type = SDRT_NONE; 1004 vub300->resp_len = 0; 1005 break; 1006 case 16: 1007 for (i = 0; i < ARRAY_SIZE(vub300->fbs); i++) 1008 vub300->fbs[i] = 0xFFFF & cmd->arg; 1009 response_type = SDRT_1; 1010 vub300->resp_len = 6; 1011 break; 1012 case 17: 1013 case 18: 1014 case 24: 1015 case 25: 1016 case 27: 1017 response_type = SDRT_1; 1018 vub300->resp_len = 6; 1019 break; 1020 case 28: 1021 case 29: 1022 response_type = SDRT_1B; 1023 vub300->resp_len = 6; 1024 break; 1025 case 30: 1026 case 32: 1027 case 33: 1028 response_type = SDRT_1; 1029 vub300->resp_len = 6; 1030 break; 1031 case 38: 1032 response_type = SDRT_1B; 1033 vub300->resp_len = 6; 1034 break; 1035 case 42: 1036 response_type = SDRT_1; 1037 vub300->resp_len = 6; 1038 break; 1039 case 52: 1040 response_type = SDRT_5; 1041 vub300->resp_len = 6; 1042 snoop_block_size_and_bus_width(vub300, cmd->arg); 1043 break; 1044 case 53: 1045 response_type = SDRT_5; 1046 vub300->resp_len = 6; 1047 break; 1048 case 55: 1049 response_type = SDRT_1; 1050 vub300->resp_len = 6; 1051 vub300->app_spec = 1; 1052 break; 1053 case 56: 1054 response_type = SDRT_1; 1055 vub300->resp_len = 6; 1056 break; 1057 default: 1058 vub300->resp_len = 0; 1059 cmd->error = -EINVAL; 1060 complete(&vub300->command_complete); 1061 return; 1062 } 1063 } 1064 /* 1065 * it is a shame that we can not use "sizeof(struct sd_command_header)" 1066 * this is because the packet _must_ be padded to 64 bytes 1067 */ 1068 vub300->cmnd.head.header_size = 20; 1069 vub300->cmnd.head.header_type = 0x00; 1070 vub300->cmnd.head.port_number = 0; /* "0" means port 1 */ 1071 vub300->cmnd.head.command_type = 0x00; /* standard read command */ 1072 vub300->cmnd.head.response_type = response_type; 1073 vub300->cmnd.head.command_index = cmd->opcode; 1074 vub300->cmnd.head.arguments[0] = cmd->arg >> 24; 1075 vub300->cmnd.head.arguments[1] = cmd->arg >> 16; 1076 vub300->cmnd.head.arguments[2] = cmd->arg >> 8; 1077 vub300->cmnd.head.arguments[3] = cmd->arg >> 0; 1078 if (cmd->opcode == 52) { 1079 int fn = 0x7 & (cmd->arg >> 28); 1080 vub300->cmnd.head.block_count[0] = 0; 1081 vub300->cmnd.head.block_count[1] = 0; 1082 vub300->cmnd.head.block_size[0] = (vub300->fbs[fn] >> 8) & 0xFF; 1083 vub300->cmnd.head.block_size[1] = (vub300->fbs[fn] >> 0) & 0xFF; 1084 vub300->cmnd.head.command_type = 0x00; 1085 vub300->cmnd.head.transfer_size[0] = 0; 1086 vub300->cmnd.head.transfer_size[1] = 0; 1087 vub300->cmnd.head.transfer_size[2] = 0; 1088 vub300->cmnd.head.transfer_size[3] = 0; 1089 } else if (!data) { 1090 vub300->cmnd.head.block_count[0] = 0; 1091 vub300->cmnd.head.block_count[1] = 0; 1092 vub300->cmnd.head.block_size[0] = (vub300->fbs[0] >> 8) & 0xFF; 1093 vub300->cmnd.head.block_size[1] = (vub300->fbs[0] >> 0) & 0xFF; 1094 vub300->cmnd.head.command_type = 0x00; 1095 vub300->cmnd.head.transfer_size[0] = 0; 1096 vub300->cmnd.head.transfer_size[1] = 0; 1097 vub300->cmnd.head.transfer_size[2] = 0; 1098 vub300->cmnd.head.transfer_size[3] = 0; 1099 } else if (cmd->opcode == 53) { 1100 int fn = 0x7 & (cmd->arg >> 28); 1101 if (0x08 & vub300->cmnd.head.arguments[0]) { /* BLOCK MODE */ 1102 vub300->cmnd.head.block_count[0] = 1103 (data->blocks >> 8) & 0xFF; 1104 vub300->cmnd.head.block_count[1] = 1105 (data->blocks >> 0) & 0xFF; 1106 vub300->cmnd.head.block_size[0] = 1107 (data->blksz >> 8) & 0xFF; 1108 vub300->cmnd.head.block_size[1] = 1109 (data->blksz >> 0) & 0xFF; 1110 } else { /* BYTE MODE */ 1111 vub300->cmnd.head.block_count[0] = 0; 1112 vub300->cmnd.head.block_count[1] = 0; 1113 vub300->cmnd.head.block_size[0] = 1114 (vub300->datasize >> 8) & 0xFF; 1115 vub300->cmnd.head.block_size[1] = 1116 (vub300->datasize >> 0) & 0xFF; 1117 } 1118 vub300->cmnd.head.command_type = 1119 (MMC_DATA_READ & data->flags) ? 0x00 : 0x80; 1120 vub300->cmnd.head.transfer_size[0] = 1121 (vub300->datasize >> 24) & 0xFF; 1122 vub300->cmnd.head.transfer_size[1] = 1123 (vub300->datasize >> 16) & 0xFF; 1124 vub300->cmnd.head.transfer_size[2] = 1125 (vub300->datasize >> 8) & 0xFF; 1126 vub300->cmnd.head.transfer_size[3] = 1127 (vub300->datasize >> 0) & 0xFF; 1128 if (vub300->datasize < vub300->fbs[fn]) { 1129 vub300->cmnd.head.block_count[0] = 0; 1130 vub300->cmnd.head.block_count[1] = 0; 1131 } 1132 } else { 1133 vub300->cmnd.head.block_count[0] = (data->blocks >> 8) & 0xFF; 1134 vub300->cmnd.head.block_count[1] = (data->blocks >> 0) & 0xFF; 1135 vub300->cmnd.head.block_size[0] = (data->blksz >> 8) & 0xFF; 1136 vub300->cmnd.head.block_size[1] = (data->blksz >> 0) & 0xFF; 1137 vub300->cmnd.head.command_type = 1138 (MMC_DATA_READ & data->flags) ? 0x00 : 0x80; 1139 vub300->cmnd.head.transfer_size[0] = 1140 (vub300->datasize >> 24) & 0xFF; 1141 vub300->cmnd.head.transfer_size[1] = 1142 (vub300->datasize >> 16) & 0xFF; 1143 vub300->cmnd.head.transfer_size[2] = 1144 (vub300->datasize >> 8) & 0xFF; 1145 vub300->cmnd.head.transfer_size[3] = 1146 (vub300->datasize >> 0) & 0xFF; 1147 if (vub300->datasize < vub300->fbs[0]) { 1148 vub300->cmnd.head.block_count[0] = 0; 1149 vub300->cmnd.head.block_count[1] = 0; 1150 } 1151 } 1152 if (vub300->cmnd.head.block_size[0] || vub300->cmnd.head.block_size[1]) { 1153 u16 block_size = vub300->cmnd.head.block_size[1] | 1154 (vub300->cmnd.head.block_size[0] << 8); 1155 u16 block_boundary = FIRMWARE_BLOCK_BOUNDARY - 1156 (FIRMWARE_BLOCK_BOUNDARY % block_size); 1157 vub300->cmnd.head.block_boundary[0] = 1158 (block_boundary >> 8) & 0xFF; 1159 vub300->cmnd.head.block_boundary[1] = 1160 (block_boundary >> 0) & 0xFF; 1161 } else { 1162 vub300->cmnd.head.block_boundary[0] = 0; 1163 vub300->cmnd.head.block_boundary[1] = 0; 1164 } 1165 usb_fill_bulk_urb(vub300->command_out_urb, vub300->udev, 1166 usb_sndbulkpipe(vub300->udev, vub300->cmnd_out_ep), 1167 &vub300->cmnd, sizeof(vub300->cmnd), 1168 command_out_completed, vub300); 1169 retval = usb_submit_urb(vub300->command_out_urb, GFP_KERNEL); 1170 if (retval < 0) { 1171 cmd->error = retval; 1172 complete(&vub300->command_complete); 1173 return; 1174 } else { 1175 return; 1176 } 1177 } 1178 1179 /* 1180 * timer callback runs in atomic mode 1181 * so it cannot call usb_kill_urb() 1182 */ 1183 static void vub300_sg_timed_out(unsigned long data) 1184 { 1185 struct vub300_mmc_host *vub300 = (struct vub300_mmc_host *)data; 1186 vub300->usb_timed_out = 1; 1187 usb_sg_cancel(&vub300->sg_request); 1188 usb_unlink_urb(vub300->command_out_urb); 1189 usb_unlink_urb(vub300->command_res_urb); 1190 } 1191 1192 static u16 roundup_to_multiple_of_64(u16 number) 1193 { 1194 return 0xFFC0 & (0x3F + number); 1195 } 1196 1197 /* 1198 * this is a separate function to solve the 80 column width restriction 1199 */ 1200 static void __download_offload_pseudocode(struct vub300_mmc_host *vub300, 1201 const struct firmware *fw) 1202 { 1203 u8 register_count = 0; 1204 u16 ts = 0; 1205 u16 interrupt_size = 0; 1206 const u8 *data = fw->data; 1207 int size = fw->size; 1208 u8 c; 1209 dev_info(&vub300->udev->dev, "using %s for SDIO offload processing\n", 1210 vub300->vub_name); 1211 do { 1212 c = *data++; 1213 } while (size-- && c); /* skip comment */ 1214 dev_info(&vub300->udev->dev, "using offload firmware %s %s\n", fw->data, 1215 vub300->vub_name); 1216 if (size < 4) { 1217 dev_err(&vub300->udev->dev, 1218 "corrupt offload pseudocode in firmware %s\n", 1219 vub300->vub_name); 1220 strncpy(vub300->vub_name, "corrupt offload pseudocode", 1221 sizeof(vub300->vub_name)); 1222 return; 1223 } 1224 interrupt_size += *data++; 1225 size -= 1; 1226 interrupt_size <<= 8; 1227 interrupt_size += *data++; 1228 size -= 1; 1229 if (interrupt_size < size) { 1230 u16 xfer_length = roundup_to_multiple_of_64(interrupt_size); 1231 u8 *xfer_buffer = kmalloc(xfer_length, GFP_KERNEL); 1232 if (xfer_buffer) { 1233 int retval; 1234 memcpy(xfer_buffer, data, interrupt_size); 1235 memset(xfer_buffer + interrupt_size, 0, 1236 xfer_length - interrupt_size); 1237 size -= interrupt_size; 1238 data += interrupt_size; 1239 retval = 1240 usb_control_msg(vub300->udev, 1241 usb_sndctrlpipe(vub300->udev, 0), 1242 SET_INTERRUPT_PSEUDOCODE, 1243 USB_DIR_OUT | USB_TYPE_VENDOR | 1244 USB_RECIP_DEVICE, 0x0000, 0x0000, 1245 xfer_buffer, xfer_length, HZ); 1246 kfree(xfer_buffer); 1247 if (retval < 0) { 1248 strncpy(vub300->vub_name, 1249 "SDIO pseudocode download failed", 1250 sizeof(vub300->vub_name)); 1251 return; 1252 } 1253 } else { 1254 dev_err(&vub300->udev->dev, 1255 "not enough memory for xfer buffer to send" 1256 " INTERRUPT_PSEUDOCODE for %s %s\n", fw->data, 1257 vub300->vub_name); 1258 strncpy(vub300->vub_name, 1259 "SDIO interrupt pseudocode download failed", 1260 sizeof(vub300->vub_name)); 1261 return; 1262 } 1263 } else { 1264 dev_err(&vub300->udev->dev, 1265 "corrupt interrupt pseudocode in firmware %s %s\n", 1266 fw->data, vub300->vub_name); 1267 strncpy(vub300->vub_name, "corrupt interrupt pseudocode", 1268 sizeof(vub300->vub_name)); 1269 return; 1270 } 1271 ts += *data++; 1272 size -= 1; 1273 ts <<= 8; 1274 ts += *data++; 1275 size -= 1; 1276 if (ts < size) { 1277 u16 xfer_length = roundup_to_multiple_of_64(ts); 1278 u8 *xfer_buffer = kmalloc(xfer_length, GFP_KERNEL); 1279 if (xfer_buffer) { 1280 int retval; 1281 memcpy(xfer_buffer, data, ts); 1282 memset(xfer_buffer + ts, 0, 1283 xfer_length - ts); 1284 size -= ts; 1285 data += ts; 1286 retval = 1287 usb_control_msg(vub300->udev, 1288 usb_sndctrlpipe(vub300->udev, 0), 1289 SET_TRANSFER_PSEUDOCODE, 1290 USB_DIR_OUT | USB_TYPE_VENDOR | 1291 USB_RECIP_DEVICE, 0x0000, 0x0000, 1292 xfer_buffer, xfer_length, HZ); 1293 kfree(xfer_buffer); 1294 if (retval < 0) { 1295 strncpy(vub300->vub_name, 1296 "SDIO pseudocode download failed", 1297 sizeof(vub300->vub_name)); 1298 return; 1299 } 1300 } else { 1301 dev_err(&vub300->udev->dev, 1302 "not enough memory for xfer buffer to send" 1303 " TRANSFER_PSEUDOCODE for %s %s\n", fw->data, 1304 vub300->vub_name); 1305 strncpy(vub300->vub_name, 1306 "SDIO transfer pseudocode download failed", 1307 sizeof(vub300->vub_name)); 1308 return; 1309 } 1310 } else { 1311 dev_err(&vub300->udev->dev, 1312 "corrupt transfer pseudocode in firmware %s %s\n", 1313 fw->data, vub300->vub_name); 1314 strncpy(vub300->vub_name, "corrupt transfer pseudocode", 1315 sizeof(vub300->vub_name)); 1316 return; 1317 } 1318 register_count += *data++; 1319 size -= 1; 1320 if (register_count * 4 == size) { 1321 int I = vub300->dynamic_register_count = register_count; 1322 int i = 0; 1323 while (I--) { 1324 unsigned int func_num = 0; 1325 vub300->sdio_register[i].func_num = *data++; 1326 size -= 1; 1327 func_num += *data++; 1328 size -= 1; 1329 func_num <<= 8; 1330 func_num += *data++; 1331 size -= 1; 1332 func_num <<= 8; 1333 func_num += *data++; 1334 size -= 1; 1335 vub300->sdio_register[i].sdio_reg = func_num; 1336 vub300->sdio_register[i].activate = 1; 1337 vub300->sdio_register[i].prepared = 0; 1338 i += 1; 1339 } 1340 dev_info(&vub300->udev->dev, 1341 "initialized %d dynamic pseudocode registers\n", 1342 vub300->dynamic_register_count); 1343 return; 1344 } else { 1345 dev_err(&vub300->udev->dev, 1346 "corrupt dynamic registers in firmware %s\n", 1347 vub300->vub_name); 1348 strncpy(vub300->vub_name, "corrupt dynamic registers", 1349 sizeof(vub300->vub_name)); 1350 return; 1351 } 1352 } 1353 1354 /* 1355 * if the binary containing the EMPTY PseudoCode can not be found 1356 * vub300->vub_name is set anyway in order to prevent an automatic retry 1357 */ 1358 static void download_offload_pseudocode(struct vub300_mmc_host *vub300) 1359 { 1360 struct mmc_card *card = vub300->mmc->card; 1361 int sdio_funcs = card->sdio_funcs; 1362 const struct firmware *fw = NULL; 1363 int l = snprintf(vub300->vub_name, sizeof(vub300->vub_name), 1364 "vub_%04X%04X", card->cis.vendor, card->cis.device); 1365 int n = 0; 1366 int retval; 1367 for (n = 0; n < sdio_funcs; n++) { 1368 struct sdio_func *sf = card->sdio_func[n]; 1369 l += snprintf(vub300->vub_name + l, 1370 sizeof(vub300->vub_name) - l, "_%04X%04X", 1371 sf->vendor, sf->device); 1372 } 1373 snprintf(vub300->vub_name + l, sizeof(vub300->vub_name) - l, ".bin"); 1374 dev_info(&vub300->udev->dev, "requesting offload firmware %s\n", 1375 vub300->vub_name); 1376 retval = request_firmware(&fw, vub300->vub_name, &card->dev); 1377 if (retval < 0) { 1378 strncpy(vub300->vub_name, "vub_default.bin", 1379 sizeof(vub300->vub_name)); 1380 retval = request_firmware(&fw, vub300->vub_name, &card->dev); 1381 if (retval < 0) { 1382 strncpy(vub300->vub_name, 1383 "no SDIO offload firmware found", 1384 sizeof(vub300->vub_name)); 1385 } else { 1386 __download_offload_pseudocode(vub300, fw); 1387 release_firmware(fw); 1388 } 1389 } else { 1390 __download_offload_pseudocode(vub300, fw); 1391 release_firmware(fw); 1392 } 1393 } 1394 1395 static void vub300_usb_bulk_msg_completion(struct urb *urb) 1396 { /* urb completion handler - hardirq */ 1397 complete((struct completion *)urb->context); 1398 } 1399 1400 static int vub300_usb_bulk_msg(struct vub300_mmc_host *vub300, 1401 unsigned int pipe, void *data, int len, 1402 int *actual_length, int timeout_msecs) 1403 { 1404 /* cmd_mutex is held by vub300_cmndwork_thread */ 1405 struct usb_device *usb_dev = vub300->udev; 1406 struct completion done; 1407 int retval; 1408 vub300->urb = usb_alloc_urb(0, GFP_KERNEL); 1409 if (!vub300->urb) 1410 return -ENOMEM; 1411 usb_fill_bulk_urb(vub300->urb, usb_dev, pipe, data, len, 1412 vub300_usb_bulk_msg_completion, NULL); 1413 init_completion(&done); 1414 vub300->urb->context = &done; 1415 vub300->urb->actual_length = 0; 1416 retval = usb_submit_urb(vub300->urb, GFP_KERNEL); 1417 if (unlikely(retval)) 1418 goto out; 1419 if (!wait_for_completion_timeout 1420 (&done, msecs_to_jiffies(timeout_msecs))) { 1421 retval = -ETIMEDOUT; 1422 usb_kill_urb(vub300->urb); 1423 } else { 1424 retval = vub300->urb->status; 1425 } 1426 out: 1427 *actual_length = vub300->urb->actual_length; 1428 usb_free_urb(vub300->urb); 1429 vub300->urb = NULL; 1430 return retval; 1431 } 1432 1433 static int __command_read_data(struct vub300_mmc_host *vub300, 1434 struct mmc_command *cmd, struct mmc_data *data) 1435 { 1436 /* cmd_mutex is held by vub300_cmndwork_thread */ 1437 int linear_length = vub300->datasize; 1438 int padded_length = vub300->large_usb_packets ? 1439 ((511 + linear_length) >> 9) << 9 : 1440 ((63 + linear_length) >> 6) << 6; 1441 if ((padded_length == linear_length) || !pad_input_to_usb_pkt) { 1442 int result; 1443 unsigned pipe; 1444 pipe = usb_rcvbulkpipe(vub300->udev, vub300->data_inp_ep); 1445 result = usb_sg_init(&vub300->sg_request, vub300->udev, 1446 pipe, 0, data->sg, 1447 data->sg_len, 0, GFP_KERNEL); 1448 if (result < 0) { 1449 usb_unlink_urb(vub300->command_out_urb); 1450 usb_unlink_urb(vub300->command_res_urb); 1451 cmd->error = result; 1452 data->bytes_xfered = 0; 1453 return 0; 1454 } else { 1455 vub300->sg_transfer_timer.expires = 1456 jiffies + msecs_to_jiffies(2000 + 1457 (linear_length / 16384)); 1458 add_timer(&vub300->sg_transfer_timer); 1459 usb_sg_wait(&vub300->sg_request); 1460 del_timer(&vub300->sg_transfer_timer); 1461 if (vub300->sg_request.status < 0) { 1462 cmd->error = vub300->sg_request.status; 1463 data->bytes_xfered = 0; 1464 return 0; 1465 } else { 1466 data->bytes_xfered = vub300->datasize; 1467 return linear_length; 1468 } 1469 } 1470 } else { 1471 u8 *buf = kmalloc(padded_length, GFP_KERNEL); 1472 if (buf) { 1473 int result; 1474 unsigned pipe = usb_rcvbulkpipe(vub300->udev, 1475 vub300->data_inp_ep); 1476 int actual_length = 0; 1477 result = vub300_usb_bulk_msg(vub300, pipe, buf, 1478 padded_length, &actual_length, 1479 2000 + (padded_length / 16384)); 1480 if (result < 0) { 1481 cmd->error = result; 1482 data->bytes_xfered = 0; 1483 kfree(buf); 1484 return 0; 1485 } else if (actual_length < linear_length) { 1486 cmd->error = -EREMOTEIO; 1487 data->bytes_xfered = 0; 1488 kfree(buf); 1489 return 0; 1490 } else { 1491 sg_copy_from_buffer(data->sg, data->sg_len, buf, 1492 linear_length); 1493 kfree(buf); 1494 data->bytes_xfered = vub300->datasize; 1495 return linear_length; 1496 } 1497 } else { 1498 cmd->error = -ENOMEM; 1499 data->bytes_xfered = 0; 1500 return 0; 1501 } 1502 } 1503 } 1504 1505 static int __command_write_data(struct vub300_mmc_host *vub300, 1506 struct mmc_command *cmd, struct mmc_data *data) 1507 { 1508 /* cmd_mutex is held by vub300_cmndwork_thread */ 1509 unsigned pipe = usb_sndbulkpipe(vub300->udev, vub300->data_out_ep); 1510 int linear_length = vub300->datasize; 1511 int modulo_64_length = linear_length & 0x003F; 1512 int modulo_512_length = linear_length & 0x01FF; 1513 if (linear_length < 64) { 1514 int result; 1515 int actual_length; 1516 sg_copy_to_buffer(data->sg, data->sg_len, 1517 vub300->padded_buffer, 1518 sizeof(vub300->padded_buffer)); 1519 memset(vub300->padded_buffer + linear_length, 0, 1520 sizeof(vub300->padded_buffer) - linear_length); 1521 result = vub300_usb_bulk_msg(vub300, pipe, vub300->padded_buffer, 1522 sizeof(vub300->padded_buffer), 1523 &actual_length, 2000 + 1524 (sizeof(vub300->padded_buffer) / 1525 16384)); 1526 if (result < 0) { 1527 cmd->error = result; 1528 data->bytes_xfered = 0; 1529 } else { 1530 data->bytes_xfered = vub300->datasize; 1531 } 1532 } else if ((!vub300->large_usb_packets && (0 < modulo_64_length)) || 1533 (vub300->large_usb_packets && (64 > modulo_512_length)) 1534 ) { /* don't you just love these work-rounds */ 1535 int padded_length = ((63 + linear_length) >> 6) << 6; 1536 u8 *buf = kmalloc(padded_length, GFP_KERNEL); 1537 if (buf) { 1538 int result; 1539 int actual_length; 1540 sg_copy_to_buffer(data->sg, data->sg_len, buf, 1541 padded_length); 1542 memset(buf + linear_length, 0, 1543 padded_length - linear_length); 1544 result = 1545 vub300_usb_bulk_msg(vub300, pipe, buf, 1546 padded_length, &actual_length, 1547 2000 + padded_length / 16384); 1548 kfree(buf); 1549 if (result < 0) { 1550 cmd->error = result; 1551 data->bytes_xfered = 0; 1552 } else { 1553 data->bytes_xfered = vub300->datasize; 1554 } 1555 } else { 1556 cmd->error = -ENOMEM; 1557 data->bytes_xfered = 0; 1558 } 1559 } else { /* no data padding required */ 1560 int result; 1561 unsigned char buf[64 * 4]; 1562 sg_copy_to_buffer(data->sg, data->sg_len, buf, sizeof(buf)); 1563 result = usb_sg_init(&vub300->sg_request, vub300->udev, 1564 pipe, 0, data->sg, 1565 data->sg_len, 0, GFP_KERNEL); 1566 if (result < 0) { 1567 usb_unlink_urb(vub300->command_out_urb); 1568 usb_unlink_urb(vub300->command_res_urb); 1569 cmd->error = result; 1570 data->bytes_xfered = 0; 1571 } else { 1572 vub300->sg_transfer_timer.expires = 1573 jiffies + msecs_to_jiffies(2000 + 1574 linear_length / 16384); 1575 add_timer(&vub300->sg_transfer_timer); 1576 usb_sg_wait(&vub300->sg_request); 1577 if (cmd->error) { 1578 data->bytes_xfered = 0; 1579 } else { 1580 del_timer(&vub300->sg_transfer_timer); 1581 if (vub300->sg_request.status < 0) { 1582 cmd->error = vub300->sg_request.status; 1583 data->bytes_xfered = 0; 1584 } else { 1585 data->bytes_xfered = vub300->datasize; 1586 } 1587 } 1588 } 1589 } 1590 return linear_length; 1591 } 1592 1593 static void __vub300_command_response(struct vub300_mmc_host *vub300, 1594 struct mmc_command *cmd, 1595 struct mmc_data *data, int data_length) 1596 { 1597 /* cmd_mutex is held by vub300_cmndwork_thread */ 1598 long respretval; 1599 int msec_timeout = 1000 + data_length / 4; 1600 respretval = 1601 wait_for_completion_timeout(&vub300->command_complete, 1602 msecs_to_jiffies(msec_timeout)); 1603 if (respretval == 0) { /* TIMED OUT */ 1604 /* we don't know which of "out" and "res" if any failed */ 1605 int result; 1606 vub300->usb_timed_out = 1; 1607 usb_kill_urb(vub300->command_out_urb); 1608 usb_kill_urb(vub300->command_res_urb); 1609 cmd->error = -ETIMEDOUT; 1610 result = usb_lock_device_for_reset(vub300->udev, 1611 vub300->interface); 1612 if (result == 0) { 1613 result = usb_reset_device(vub300->udev); 1614 usb_unlock_device(vub300->udev); 1615 } 1616 } else if (respretval < 0) { 1617 /* we don't know which of "out" and "res" if any failed */ 1618 usb_kill_urb(vub300->command_out_urb); 1619 usb_kill_urb(vub300->command_res_urb); 1620 cmd->error = respretval; 1621 } else if (cmd->error) { 1622 /* 1623 * the error occurred sending the command 1624 * or receiving the response 1625 */ 1626 } else if (vub300->command_out_urb->status) { 1627 vub300->usb_transport_fail = vub300->command_out_urb->status; 1628 cmd->error = -EPROTO == vub300->command_out_urb->status ? 1629 -ESHUTDOWN : vub300->command_out_urb->status; 1630 } else if (vub300->command_res_urb->status) { 1631 vub300->usb_transport_fail = vub300->command_res_urb->status; 1632 cmd->error = -EPROTO == vub300->command_res_urb->status ? 1633 -ESHUTDOWN : vub300->command_res_urb->status; 1634 } else if (vub300->resp.common.header_type == 0x00) { 1635 /* 1636 * the command completed successfully 1637 * and there was no piggybacked data 1638 */ 1639 } else if (vub300->resp.common.header_type == RESPONSE_ERROR) { 1640 cmd->error = 1641 vub300_response_error(vub300->resp.error.error_code); 1642 if (vub300->data) 1643 usb_sg_cancel(&vub300->sg_request); 1644 } else if (vub300->resp.common.header_type == RESPONSE_PIGGYBACKED) { 1645 int offloaded_data_length = 1646 vub300->resp.common.header_size - 1647 sizeof(struct sd_register_header); 1648 int register_count = offloaded_data_length >> 3; 1649 int ri = 0; 1650 while (register_count--) { 1651 add_offloaded_reg(vub300, &vub300->resp.pig.reg[ri]); 1652 ri += 1; 1653 } 1654 vub300->resp.common.header_size = 1655 sizeof(struct sd_register_header); 1656 vub300->resp.common.header_type = 0x00; 1657 cmd->error = 0; 1658 } else if (vub300->resp.common.header_type == RESPONSE_PIG_DISABLED) { 1659 int offloaded_data_length = 1660 vub300->resp.common.header_size - 1661 sizeof(struct sd_register_header); 1662 int register_count = offloaded_data_length >> 3; 1663 int ri = 0; 1664 while (register_count--) { 1665 add_offloaded_reg(vub300, &vub300->resp.pig.reg[ri]); 1666 ri += 1; 1667 } 1668 mutex_lock(&vub300->irq_mutex); 1669 if (vub300->irqs_queued) { 1670 vub300->irqs_queued += 1; 1671 } else if (vub300->irq_enabled) { 1672 vub300->irqs_queued += 1; 1673 vub300_queue_poll_work(vub300, 0); 1674 } else { 1675 vub300->irqs_queued += 1; 1676 } 1677 vub300->irq_disabled = 1; 1678 mutex_unlock(&vub300->irq_mutex); 1679 vub300->resp.common.header_size = 1680 sizeof(struct sd_register_header); 1681 vub300->resp.common.header_type = 0x00; 1682 cmd->error = 0; 1683 } else if (vub300->resp.common.header_type == RESPONSE_PIG_ENABLED) { 1684 int offloaded_data_length = 1685 vub300->resp.common.header_size - 1686 sizeof(struct sd_register_header); 1687 int register_count = offloaded_data_length >> 3; 1688 int ri = 0; 1689 while (register_count--) { 1690 add_offloaded_reg(vub300, &vub300->resp.pig.reg[ri]); 1691 ri += 1; 1692 } 1693 mutex_lock(&vub300->irq_mutex); 1694 if (vub300->irqs_queued) { 1695 vub300->irqs_queued += 1; 1696 } else if (vub300->irq_enabled) { 1697 vub300->irqs_queued += 1; 1698 vub300_queue_poll_work(vub300, 0); 1699 } else { 1700 vub300->irqs_queued += 1; 1701 } 1702 vub300->irq_disabled = 0; 1703 mutex_unlock(&vub300->irq_mutex); 1704 vub300->resp.common.header_size = 1705 sizeof(struct sd_register_header); 1706 vub300->resp.common.header_type = 0x00; 1707 cmd->error = 0; 1708 } else { 1709 cmd->error = -EINVAL; 1710 } 1711 } 1712 1713 static void construct_request_response(struct vub300_mmc_host *vub300, 1714 struct mmc_command *cmd) 1715 { 1716 int resp_len = vub300->resp_len; 1717 int less_cmd = (17 == resp_len) ? resp_len : resp_len - 1; 1718 int bytes = 3 & less_cmd; 1719 int words = less_cmd >> 2; 1720 u8 *r = vub300->resp.response.command_response; 1721 if (bytes == 3) { 1722 cmd->resp[words] = (r[1 + (words << 2)] << 24) 1723 | (r[2 + (words << 2)] << 16) 1724 | (r[3 + (words << 2)] << 8); 1725 } else if (bytes == 2) { 1726 cmd->resp[words] = (r[1 + (words << 2)] << 24) 1727 | (r[2 + (words << 2)] << 16); 1728 } else if (bytes == 1) { 1729 cmd->resp[words] = (r[1 + (words << 2)] << 24); 1730 } 1731 while (words-- > 0) { 1732 cmd->resp[words] = (r[1 + (words << 2)] << 24) 1733 | (r[2 + (words << 2)] << 16) 1734 | (r[3 + (words << 2)] << 8) 1735 | (r[4 + (words << 2)] << 0); 1736 } 1737 if ((cmd->opcode == 53) && (0x000000FF & cmd->resp[0])) 1738 cmd->resp[0] &= 0xFFFFFF00; 1739 } 1740 1741 /* this thread runs only when there is an upper level command req outstanding */ 1742 static void vub300_cmndwork_thread(struct work_struct *work) 1743 { 1744 struct vub300_mmc_host *vub300 = 1745 container_of(work, struct vub300_mmc_host, cmndwork); 1746 if (!vub300->interface) { 1747 kref_put(&vub300->kref, vub300_delete); 1748 return; 1749 } else { 1750 struct mmc_request *req = vub300->req; 1751 struct mmc_command *cmd = vub300->cmd; 1752 struct mmc_data *data = vub300->data; 1753 int data_length; 1754 mutex_lock(&vub300->cmd_mutex); 1755 init_completion(&vub300->command_complete); 1756 if (likely(vub300->vub_name[0]) || !vub300->mmc->card) { 1757 /* 1758 * the name of the EMPTY Pseudo firmware file 1759 * is used as a flag to indicate that the file 1760 * has been already downloaded to the VUB300 chip 1761 */ 1762 } else if (0 == vub300->mmc->card->sdio_funcs) { 1763 strncpy(vub300->vub_name, "SD memory device", 1764 sizeof(vub300->vub_name)); 1765 } else { 1766 download_offload_pseudocode(vub300); 1767 } 1768 send_command(vub300); 1769 if (!data) 1770 data_length = 0; 1771 else if (MMC_DATA_READ & data->flags) 1772 data_length = __command_read_data(vub300, cmd, data); 1773 else 1774 data_length = __command_write_data(vub300, cmd, data); 1775 __vub300_command_response(vub300, cmd, data, data_length); 1776 vub300->req = NULL; 1777 vub300->cmd = NULL; 1778 vub300->data = NULL; 1779 if (cmd->error) { 1780 if (cmd->error == -ENOMEDIUM) 1781 check_vub300_port_status(vub300); 1782 mutex_unlock(&vub300->cmd_mutex); 1783 mmc_request_done(vub300->mmc, req); 1784 kref_put(&vub300->kref, vub300_delete); 1785 return; 1786 } else { 1787 construct_request_response(vub300, cmd); 1788 vub300->resp_len = 0; 1789 mutex_unlock(&vub300->cmd_mutex); 1790 kref_put(&vub300->kref, vub300_delete); 1791 mmc_request_done(vub300->mmc, req); 1792 return; 1793 } 1794 } 1795 } 1796 1797 static int examine_cyclic_buffer(struct vub300_mmc_host *vub300, 1798 struct mmc_command *cmd, u8 Function) 1799 { 1800 /* cmd_mutex is held by vub300_mmc_request */ 1801 u8 cmd0 = 0xFF & (cmd->arg >> 24); 1802 u8 cmd1 = 0xFF & (cmd->arg >> 16); 1803 u8 cmd2 = 0xFF & (cmd->arg >> 8); 1804 u8 cmd3 = 0xFF & (cmd->arg >> 0); 1805 int first = MAXREGMASK & vub300->fn[Function].offload_point; 1806 struct offload_registers_access *rf = &vub300->fn[Function].reg[first]; 1807 if (cmd0 == rf->command_byte[0] && 1808 cmd1 == rf->command_byte[1] && 1809 cmd2 == rf->command_byte[2] && 1810 cmd3 == rf->command_byte[3]) { 1811 u8 checksum = 0x00; 1812 cmd->resp[1] = checksum << 24; 1813 cmd->resp[0] = (rf->Respond_Byte[0] << 24) 1814 | (rf->Respond_Byte[1] << 16) 1815 | (rf->Respond_Byte[2] << 8) 1816 | (rf->Respond_Byte[3] << 0); 1817 vub300->fn[Function].offload_point += 1; 1818 vub300->fn[Function].offload_count -= 1; 1819 vub300->total_offload_count -= 1; 1820 return 1; 1821 } else { 1822 int delta = 1; /* because it does not match the first one */ 1823 u8 register_count = vub300->fn[Function].offload_count - 1; 1824 u32 register_point = vub300->fn[Function].offload_point + 1; 1825 while (0 < register_count) { 1826 int point = MAXREGMASK & register_point; 1827 struct offload_registers_access *r = 1828 &vub300->fn[Function].reg[point]; 1829 if (cmd0 == r->command_byte[0] && 1830 cmd1 == r->command_byte[1] && 1831 cmd2 == r->command_byte[2] && 1832 cmd3 == r->command_byte[3]) { 1833 u8 checksum = 0x00; 1834 cmd->resp[1] = checksum << 24; 1835 cmd->resp[0] = (r->Respond_Byte[0] << 24) 1836 | (r->Respond_Byte[1] << 16) 1837 | (r->Respond_Byte[2] << 8) 1838 | (r->Respond_Byte[3] << 0); 1839 vub300->fn[Function].offload_point += delta; 1840 vub300->fn[Function].offload_count -= delta; 1841 vub300->total_offload_count -= delta; 1842 return 1; 1843 } else { 1844 register_point += 1; 1845 register_count -= 1; 1846 delta += 1; 1847 continue; 1848 } 1849 } 1850 return 0; 1851 } 1852 } 1853 1854 static int satisfy_request_from_offloaded_data(struct vub300_mmc_host *vub300, 1855 struct mmc_command *cmd) 1856 { 1857 /* cmd_mutex is held by vub300_mmc_request */ 1858 u8 regs = vub300->dynamic_register_count; 1859 u8 i = 0; 1860 u8 func = FUN(cmd); 1861 u32 reg = REG(cmd); 1862 while (0 < regs--) { 1863 if ((vub300->sdio_register[i].func_num == func) && 1864 (vub300->sdio_register[i].sdio_reg == reg)) { 1865 if (!vub300->sdio_register[i].prepared) { 1866 return 0; 1867 } else if ((0x80000000 & cmd->arg) == 0x80000000) { 1868 /* 1869 * a write to a dynamic register 1870 * nullifies our offloaded value 1871 */ 1872 vub300->sdio_register[i].prepared = 0; 1873 return 0; 1874 } else { 1875 u8 checksum = 0x00; 1876 u8 rsp0 = 0x00; 1877 u8 rsp1 = 0x00; 1878 u8 rsp2 = vub300->sdio_register[i].response; 1879 u8 rsp3 = vub300->sdio_register[i].regvalue; 1880 vub300->sdio_register[i].prepared = 0; 1881 cmd->resp[1] = checksum << 24; 1882 cmd->resp[0] = (rsp0 << 24) 1883 | (rsp1 << 16) 1884 | (rsp2 << 8) 1885 | (rsp3 << 0); 1886 return 1; 1887 } 1888 } else { 1889 i += 1; 1890 continue; 1891 } 1892 } 1893 if (vub300->total_offload_count == 0) 1894 return 0; 1895 else if (vub300->fn[func].offload_count == 0) 1896 return 0; 1897 else 1898 return examine_cyclic_buffer(vub300, cmd, func); 1899 } 1900 1901 static void vub300_mmc_request(struct mmc_host *mmc, struct mmc_request *req) 1902 { /* NOT irq */ 1903 struct mmc_command *cmd = req->cmd; 1904 struct vub300_mmc_host *vub300 = mmc_priv(mmc); 1905 if (!vub300->interface) { 1906 cmd->error = -ESHUTDOWN; 1907 mmc_request_done(mmc, req); 1908 return; 1909 } else { 1910 struct mmc_data *data = req->data; 1911 if (!vub300->card_powered) { 1912 cmd->error = -ENOMEDIUM; 1913 mmc_request_done(mmc, req); 1914 return; 1915 } 1916 if (!vub300->card_present) { 1917 cmd->error = -ENOMEDIUM; 1918 mmc_request_done(mmc, req); 1919 return; 1920 } 1921 if (vub300->usb_transport_fail) { 1922 cmd->error = vub300->usb_transport_fail; 1923 mmc_request_done(mmc, req); 1924 return; 1925 } 1926 if (!vub300->interface) { 1927 cmd->error = -ENODEV; 1928 mmc_request_done(mmc, req); 1929 return; 1930 } 1931 kref_get(&vub300->kref); 1932 mutex_lock(&vub300->cmd_mutex); 1933 mod_timer(&vub300->inactivity_timer, jiffies + HZ); 1934 /* 1935 * for performance we have to return immediately 1936 * if the requested data has been offloaded 1937 */ 1938 if (cmd->opcode == 52 && 1939 satisfy_request_from_offloaded_data(vub300, cmd)) { 1940 cmd->error = 0; 1941 mutex_unlock(&vub300->cmd_mutex); 1942 kref_put(&vub300->kref, vub300_delete); 1943 mmc_request_done(mmc, req); 1944 return; 1945 } else { 1946 vub300->cmd = cmd; 1947 vub300->req = req; 1948 vub300->data = data; 1949 if (data) 1950 vub300->datasize = data->blksz * data->blocks; 1951 else 1952 vub300->datasize = 0; 1953 vub300_queue_cmnd_work(vub300); 1954 mutex_unlock(&vub300->cmd_mutex); 1955 kref_put(&vub300->kref, vub300_delete); 1956 /* 1957 * the kernel lock diagnostics complain 1958 * if the cmd_mutex * is "passed on" 1959 * to the cmndwork thread, 1960 * so we must release it now 1961 * and re-acquire it in the cmndwork thread 1962 */ 1963 } 1964 } 1965 } 1966 1967 static void __set_clock_speed(struct vub300_mmc_host *vub300, u8 buf[8], 1968 struct mmc_ios *ios) 1969 { 1970 int buf_array_size = 8; /* ARRAY_SIZE(buf) does not work !!! */ 1971 int retval; 1972 u32 kHzClock; 1973 if (ios->clock >= 48000000) 1974 kHzClock = 48000; 1975 else if (ios->clock >= 24000000) 1976 kHzClock = 24000; 1977 else if (ios->clock >= 20000000) 1978 kHzClock = 20000; 1979 else if (ios->clock >= 15000000) 1980 kHzClock = 15000; 1981 else if (ios->clock >= 200000) 1982 kHzClock = 200; 1983 else 1984 kHzClock = 0; 1985 { 1986 int i; 1987 u64 c = kHzClock; 1988 for (i = 0; i < buf_array_size; i++) { 1989 buf[i] = c; 1990 c >>= 8; 1991 } 1992 } 1993 retval = 1994 usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0), 1995 SET_CLOCK_SPEED, 1996 USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 1997 0x00, 0x00, buf, buf_array_size, HZ); 1998 if (retval != 8) { 1999 dev_err(&vub300->udev->dev, "SET_CLOCK_SPEED" 2000 " %dkHz failed with retval=%d\n", kHzClock, retval); 2001 } else { 2002 dev_dbg(&vub300->udev->dev, "SET_CLOCK_SPEED" 2003 " %dkHz\n", kHzClock); 2004 } 2005 } 2006 2007 static void vub300_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) 2008 { /* NOT irq */ 2009 struct vub300_mmc_host *vub300 = mmc_priv(mmc); 2010 if (!vub300->interface) 2011 return; 2012 kref_get(&vub300->kref); 2013 mutex_lock(&vub300->cmd_mutex); 2014 if ((ios->power_mode == MMC_POWER_OFF) && vub300->card_powered) { 2015 vub300->card_powered = 0; 2016 usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0), 2017 SET_SD_POWER, 2018 USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 2019 0x0000, 0x0000, NULL, 0, HZ); 2020 /* must wait for the VUB300 u-proc to boot up */ 2021 msleep(600); 2022 } else if ((ios->power_mode == MMC_POWER_UP) && !vub300->card_powered) { 2023 usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0), 2024 SET_SD_POWER, 2025 USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 2026 0x0001, 0x0000, NULL, 0, HZ); 2027 msleep(600); 2028 vub300->card_powered = 1; 2029 } else if (ios->power_mode == MMC_POWER_ON) { 2030 u8 *buf = kmalloc(8, GFP_KERNEL); 2031 if (buf) { 2032 __set_clock_speed(vub300, buf, ios); 2033 kfree(buf); 2034 } 2035 } else { 2036 /* this should mean no change of state */ 2037 } 2038 mutex_unlock(&vub300->cmd_mutex); 2039 kref_put(&vub300->kref, vub300_delete); 2040 } 2041 2042 static int vub300_mmc_get_ro(struct mmc_host *mmc) 2043 { 2044 struct vub300_mmc_host *vub300 = mmc_priv(mmc); 2045 return vub300->read_only; 2046 } 2047 2048 static void vub300_enable_sdio_irq(struct mmc_host *mmc, int enable) 2049 { /* NOT irq */ 2050 struct vub300_mmc_host *vub300 = mmc_priv(mmc); 2051 if (!vub300->interface) 2052 return; 2053 kref_get(&vub300->kref); 2054 if (enable) { 2055 mutex_lock(&vub300->irq_mutex); 2056 if (vub300->irqs_queued) { 2057 vub300->irqs_queued -= 1; 2058 mmc_signal_sdio_irq(vub300->mmc); 2059 } else if (vub300->irq_disabled) { 2060 vub300->irq_disabled = 0; 2061 vub300->irq_enabled = 1; 2062 vub300_queue_poll_work(vub300, 0); 2063 } else if (vub300->irq_enabled) { 2064 /* this should not happen, so we will just ignore it */ 2065 } else { 2066 vub300->irq_enabled = 1; 2067 vub300_queue_poll_work(vub300, 0); 2068 } 2069 mutex_unlock(&vub300->irq_mutex); 2070 } else { 2071 vub300->irq_enabled = 0; 2072 } 2073 kref_put(&vub300->kref, vub300_delete); 2074 } 2075 2076 static void vub300_init_card(struct mmc_host *mmc, struct mmc_card *card) 2077 { /* NOT irq */ 2078 struct vub300_mmc_host *vub300 = mmc_priv(mmc); 2079 dev_info(&vub300->udev->dev, "NO host QUIRKS for this card\n"); 2080 } 2081 2082 static struct mmc_host_ops vub300_mmc_ops = { 2083 .request = vub300_mmc_request, 2084 .set_ios = vub300_mmc_set_ios, 2085 .get_ro = vub300_mmc_get_ro, 2086 .enable_sdio_irq = vub300_enable_sdio_irq, 2087 .init_card = vub300_init_card, 2088 }; 2089 2090 static int vub300_probe(struct usb_interface *interface, 2091 const struct usb_device_id *id) 2092 { /* NOT irq */ 2093 struct vub300_mmc_host *vub300; 2094 struct usb_host_interface *iface_desc; 2095 struct usb_device *udev = usb_get_dev(interface_to_usbdev(interface)); 2096 int i; 2097 int retval = -ENOMEM; 2098 struct urb *command_out_urb; 2099 struct urb *command_res_urb; 2100 struct mmc_host *mmc; 2101 char manufacturer[48]; 2102 char product[32]; 2103 char serial_number[32]; 2104 usb_string(udev, udev->descriptor.iManufacturer, manufacturer, 2105 sizeof(manufacturer)); 2106 usb_string(udev, udev->descriptor.iProduct, product, sizeof(product)); 2107 usb_string(udev, udev->descriptor.iSerialNumber, serial_number, 2108 sizeof(serial_number)); 2109 dev_info(&udev->dev, "probing VID:PID(%04X:%04X) %s %s %s\n", 2110 udev->descriptor.idVendor, udev->descriptor.idProduct, 2111 manufacturer, product, serial_number); 2112 command_out_urb = usb_alloc_urb(0, GFP_KERNEL); 2113 if (!command_out_urb) { 2114 retval = -ENOMEM; 2115 goto error0; 2116 } 2117 command_res_urb = usb_alloc_urb(0, GFP_KERNEL); 2118 if (!command_res_urb) { 2119 retval = -ENOMEM; 2120 goto error1; 2121 } 2122 /* this also allocates memory for our VUB300 mmc host device */ 2123 mmc = mmc_alloc_host(sizeof(struct vub300_mmc_host), &udev->dev); 2124 if (!mmc) { 2125 retval = -ENOMEM; 2126 dev_err(&udev->dev, "not enough memory for the mmc_host\n"); 2127 goto error4; 2128 } 2129 /* MMC core transfer sizes tunable parameters */ 2130 mmc->caps = 0; 2131 if (!force_1_bit_data_xfers) 2132 mmc->caps |= MMC_CAP_4_BIT_DATA; 2133 if (!force_polling_for_irqs) 2134 mmc->caps |= MMC_CAP_SDIO_IRQ; 2135 mmc->caps &= ~MMC_CAP_NEEDS_POLL; 2136 /* 2137 * MMC_CAP_NEEDS_POLL causes core.c:mmc_rescan() to poll 2138 * for devices which results in spurious CMD7's being 2139 * issued which stops some SDIO cards from working 2140 */ 2141 if (limit_speed_to_24_MHz) { 2142 mmc->caps |= MMC_CAP_MMC_HIGHSPEED; 2143 mmc->caps |= MMC_CAP_SD_HIGHSPEED; 2144 mmc->f_max = 24000000; 2145 dev_info(&udev->dev, "limiting SDIO speed to 24_MHz\n"); 2146 } else { 2147 mmc->caps |= MMC_CAP_MMC_HIGHSPEED; 2148 mmc->caps |= MMC_CAP_SD_HIGHSPEED; 2149 mmc->f_max = 48000000; 2150 } 2151 mmc->f_min = 200000; 2152 mmc->max_blk_count = 511; 2153 mmc->max_blk_size = 512; 2154 mmc->max_segs = 128; 2155 if (force_max_req_size) 2156 mmc->max_req_size = force_max_req_size * 1024; 2157 else 2158 mmc->max_req_size = 64 * 1024; 2159 mmc->max_seg_size = mmc->max_req_size; 2160 mmc->ocr_avail = 0; 2161 mmc->ocr_avail |= MMC_VDD_165_195; 2162 mmc->ocr_avail |= MMC_VDD_20_21; 2163 mmc->ocr_avail |= MMC_VDD_21_22; 2164 mmc->ocr_avail |= MMC_VDD_22_23; 2165 mmc->ocr_avail |= MMC_VDD_23_24; 2166 mmc->ocr_avail |= MMC_VDD_24_25; 2167 mmc->ocr_avail |= MMC_VDD_25_26; 2168 mmc->ocr_avail |= MMC_VDD_26_27; 2169 mmc->ocr_avail |= MMC_VDD_27_28; 2170 mmc->ocr_avail |= MMC_VDD_28_29; 2171 mmc->ocr_avail |= MMC_VDD_29_30; 2172 mmc->ocr_avail |= MMC_VDD_30_31; 2173 mmc->ocr_avail |= MMC_VDD_31_32; 2174 mmc->ocr_avail |= MMC_VDD_32_33; 2175 mmc->ocr_avail |= MMC_VDD_33_34; 2176 mmc->ocr_avail |= MMC_VDD_34_35; 2177 mmc->ocr_avail |= MMC_VDD_35_36; 2178 mmc->ops = &vub300_mmc_ops; 2179 vub300 = mmc_priv(mmc); 2180 vub300->mmc = mmc; 2181 vub300->card_powered = 0; 2182 vub300->bus_width = 0; 2183 vub300->cmnd.head.block_size[0] = 0x00; 2184 vub300->cmnd.head.block_size[1] = 0x00; 2185 vub300->app_spec = 0; 2186 mutex_init(&vub300->cmd_mutex); 2187 mutex_init(&vub300->irq_mutex); 2188 vub300->command_out_urb = command_out_urb; 2189 vub300->command_res_urb = command_res_urb; 2190 vub300->usb_timed_out = 0; 2191 vub300->dynamic_register_count = 0; 2192 2193 for (i = 0; i < ARRAY_SIZE(vub300->fn); i++) { 2194 vub300->fn[i].offload_point = 0; 2195 vub300->fn[i].offload_count = 0; 2196 } 2197 2198 vub300->total_offload_count = 0; 2199 vub300->irq_enabled = 0; 2200 vub300->irq_disabled = 0; 2201 vub300->irqs_queued = 0; 2202 2203 for (i = 0; i < ARRAY_SIZE(vub300->sdio_register); i++) 2204 vub300->sdio_register[i++].activate = 0; 2205 2206 vub300->udev = udev; 2207 vub300->interface = interface; 2208 vub300->cmnd_res_ep = 0; 2209 vub300->cmnd_out_ep = 0; 2210 vub300->data_inp_ep = 0; 2211 vub300->data_out_ep = 0; 2212 2213 for (i = 0; i < ARRAY_SIZE(vub300->fbs); i++) 2214 vub300->fbs[i] = 512; 2215 2216 /* 2217 * set up the endpoint information 2218 * 2219 * use the first pair of bulk-in and bulk-out 2220 * endpoints for Command/Response+Interrupt 2221 * 2222 * use the second pair of bulk-in and bulk-out 2223 * endpoints for Data In/Out 2224 */ 2225 vub300->large_usb_packets = 0; 2226 iface_desc = interface->cur_altsetting; 2227 for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { 2228 struct usb_endpoint_descriptor *endpoint = 2229 &iface_desc->endpoint[i].desc; 2230 dev_info(&vub300->udev->dev, 2231 "vub300 testing %s EndPoint(%d) %02X\n", 2232 usb_endpoint_is_bulk_in(endpoint) ? "BULK IN" : 2233 usb_endpoint_is_bulk_out(endpoint) ? "BULK OUT" : 2234 "UNKNOWN", i, endpoint->bEndpointAddress); 2235 if (endpoint->wMaxPacketSize > 64) 2236 vub300->large_usb_packets = 1; 2237 if (usb_endpoint_is_bulk_in(endpoint)) { 2238 if (!vub300->cmnd_res_ep) { 2239 vub300->cmnd_res_ep = 2240 endpoint->bEndpointAddress; 2241 } else if (!vub300->data_inp_ep) { 2242 vub300->data_inp_ep = 2243 endpoint->bEndpointAddress; 2244 } else { 2245 dev_warn(&vub300->udev->dev, 2246 "ignoring" 2247 " unexpected bulk_in endpoint"); 2248 } 2249 } else if (usb_endpoint_is_bulk_out(endpoint)) { 2250 if (!vub300->cmnd_out_ep) { 2251 vub300->cmnd_out_ep = 2252 endpoint->bEndpointAddress; 2253 } else if (!vub300->data_out_ep) { 2254 vub300->data_out_ep = 2255 endpoint->bEndpointAddress; 2256 } else { 2257 dev_warn(&vub300->udev->dev, 2258 "ignoring" 2259 " unexpected bulk_out endpoint"); 2260 } 2261 } else { 2262 dev_warn(&vub300->udev->dev, 2263 "vub300 ignoring EndPoint(%d) %02X", i, 2264 endpoint->bEndpointAddress); 2265 } 2266 } 2267 if (vub300->cmnd_res_ep && vub300->cmnd_out_ep && 2268 vub300->data_inp_ep && vub300->data_out_ep) { 2269 dev_info(&vub300->udev->dev, 2270 "vub300 %s packets" 2271 " using EndPoints %02X %02X %02X %02X\n", 2272 vub300->large_usb_packets ? "LARGE" : "SMALL", 2273 vub300->cmnd_out_ep, vub300->cmnd_res_ep, 2274 vub300->data_out_ep, vub300->data_inp_ep); 2275 /* we have the expected EndPoints */ 2276 } else { 2277 dev_err(&vub300->udev->dev, 2278 "Could not find two sets of bulk-in/out endpoint pairs\n"); 2279 retval = -EINVAL; 2280 goto error5; 2281 } 2282 retval = 2283 usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0), 2284 GET_HC_INF0, 2285 USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 2286 0x0000, 0x0000, &vub300->hc_info, 2287 sizeof(vub300->hc_info), HZ); 2288 if (retval < 0) 2289 goto error5; 2290 retval = 2291 usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0), 2292 SET_ROM_WAIT_STATES, 2293 USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 2294 firmware_rom_wait_states, 0x0000, NULL, 0, HZ); 2295 if (retval < 0) 2296 goto error5; 2297 dev_info(&vub300->udev->dev, 2298 "operating_mode = %s %s %d MHz %s %d byte USB packets\n", 2299 (mmc->caps & MMC_CAP_SDIO_IRQ) ? "IRQs" : "POLL", 2300 (mmc->caps & MMC_CAP_4_BIT_DATA) ? "4-bit" : "1-bit", 2301 mmc->f_max / 1000000, 2302 pad_input_to_usb_pkt ? "padding input data to" : "with", 2303 vub300->large_usb_packets ? 512 : 64); 2304 retval = 2305 usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0), 2306 GET_SYSTEM_PORT_STATUS, 2307 USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 2308 0x0000, 0x0000, &vub300->system_port_status, 2309 sizeof(vub300->system_port_status), HZ); 2310 if (retval < 0) { 2311 goto error4; 2312 } else if (sizeof(vub300->system_port_status) == retval) { 2313 vub300->card_present = 2314 (0x0001 & vub300->system_port_status.port_flags) ? 1 : 0; 2315 vub300->read_only = 2316 (0x0010 & vub300->system_port_status.port_flags) ? 1 : 0; 2317 } else { 2318 goto error4; 2319 } 2320 usb_set_intfdata(interface, vub300); 2321 INIT_DELAYED_WORK(&vub300->pollwork, vub300_pollwork_thread); 2322 INIT_WORK(&vub300->cmndwork, vub300_cmndwork_thread); 2323 INIT_WORK(&vub300->deadwork, vub300_deadwork_thread); 2324 kref_init(&vub300->kref); 2325 init_timer(&vub300->sg_transfer_timer); 2326 vub300->sg_transfer_timer.data = (unsigned long)vub300; 2327 vub300->sg_transfer_timer.function = vub300_sg_timed_out; 2328 kref_get(&vub300->kref); 2329 init_timer(&vub300->inactivity_timer); 2330 vub300->inactivity_timer.data = (unsigned long)vub300; 2331 vub300->inactivity_timer.function = vub300_inactivity_timer_expired; 2332 vub300->inactivity_timer.expires = jiffies + HZ; 2333 add_timer(&vub300->inactivity_timer); 2334 if (vub300->card_present) 2335 dev_info(&vub300->udev->dev, 2336 "USB vub300 remote SDIO host controller[%d]" 2337 "connected with SD/SDIO card inserted\n", 2338 interface_to_InterfaceNumber(interface)); 2339 else 2340 dev_info(&vub300->udev->dev, 2341 "USB vub300 remote SDIO host controller[%d]" 2342 "connected with no SD/SDIO card inserted\n", 2343 interface_to_InterfaceNumber(interface)); 2344 mmc_add_host(mmc); 2345 return 0; 2346 error5: 2347 mmc_free_host(mmc); 2348 /* 2349 * and hence also frees vub300 2350 * which is contained at the end of struct mmc 2351 */ 2352 error4: 2353 usb_free_urb(command_res_urb); 2354 error1: 2355 usb_free_urb(command_out_urb); 2356 error0: 2357 usb_put_dev(udev); 2358 return retval; 2359 } 2360 2361 static void vub300_disconnect(struct usb_interface *interface) 2362 { /* NOT irq */ 2363 struct vub300_mmc_host *vub300 = usb_get_intfdata(interface); 2364 if (!vub300 || !vub300->mmc) { 2365 return; 2366 } else { 2367 struct mmc_host *mmc = vub300->mmc; 2368 if (!vub300->mmc) { 2369 return; 2370 } else { 2371 int ifnum = interface_to_InterfaceNumber(interface); 2372 usb_set_intfdata(interface, NULL); 2373 /* prevent more I/O from starting */ 2374 vub300->interface = NULL; 2375 kref_put(&vub300->kref, vub300_delete); 2376 mmc_remove_host(mmc); 2377 pr_info("USB vub300 remote SDIO host controller[%d]" 2378 " now disconnected", ifnum); 2379 return; 2380 } 2381 } 2382 } 2383 2384 #ifdef CONFIG_PM 2385 static int vub300_suspend(struct usb_interface *intf, pm_message_t message) 2386 { 2387 return 0; 2388 } 2389 2390 static int vub300_resume(struct usb_interface *intf) 2391 { 2392 return 0; 2393 } 2394 #else 2395 #define vub300_suspend NULL 2396 #define vub300_resume NULL 2397 #endif 2398 static int vub300_pre_reset(struct usb_interface *intf) 2399 { /* NOT irq */ 2400 struct vub300_mmc_host *vub300 = usb_get_intfdata(intf); 2401 mutex_lock(&vub300->cmd_mutex); 2402 return 0; 2403 } 2404 2405 static int vub300_post_reset(struct usb_interface *intf) 2406 { /* NOT irq */ 2407 struct vub300_mmc_host *vub300 = usb_get_intfdata(intf); 2408 /* we are sure no URBs are active - no locking needed */ 2409 vub300->errors = -EPIPE; 2410 mutex_unlock(&vub300->cmd_mutex); 2411 return 0; 2412 } 2413 2414 static struct usb_driver vub300_driver = { 2415 .name = "vub300", 2416 .probe = vub300_probe, 2417 .disconnect = vub300_disconnect, 2418 .suspend = vub300_suspend, 2419 .resume = vub300_resume, 2420 .pre_reset = vub300_pre_reset, 2421 .post_reset = vub300_post_reset, 2422 .id_table = vub300_table, 2423 .supports_autosuspend = 1, 2424 }; 2425 2426 static int __init vub300_init(void) 2427 { /* NOT irq */ 2428 int result; 2429 2430 pr_info("VUB300 Driver rom wait states = %02X irqpoll timeout = %04X", 2431 firmware_rom_wait_states, 0x0FFFF & firmware_irqpoll_timeout); 2432 cmndworkqueue = create_singlethread_workqueue("kvub300c"); 2433 if (!cmndworkqueue) { 2434 pr_err("not enough memory for the REQUEST workqueue"); 2435 result = -ENOMEM; 2436 goto out1; 2437 } 2438 pollworkqueue = create_singlethread_workqueue("kvub300p"); 2439 if (!pollworkqueue) { 2440 pr_err("not enough memory for the IRQPOLL workqueue"); 2441 result = -ENOMEM; 2442 goto out2; 2443 } 2444 deadworkqueue = create_singlethread_workqueue("kvub300d"); 2445 if (!deadworkqueue) { 2446 pr_err("not enough memory for the EXPIRED workqueue"); 2447 result = -ENOMEM; 2448 goto out3; 2449 } 2450 result = usb_register(&vub300_driver); 2451 if (result) { 2452 pr_err("usb_register failed. Error number %d", result); 2453 goto out4; 2454 } 2455 return 0; 2456 out4: 2457 destroy_workqueue(deadworkqueue); 2458 out3: 2459 destroy_workqueue(pollworkqueue); 2460 out2: 2461 destroy_workqueue(cmndworkqueue); 2462 out1: 2463 return result; 2464 } 2465 2466 static void __exit vub300_exit(void) 2467 { 2468 usb_deregister(&vub300_driver); 2469 flush_workqueue(cmndworkqueue); 2470 flush_workqueue(pollworkqueue); 2471 flush_workqueue(deadworkqueue); 2472 destroy_workqueue(cmndworkqueue); 2473 destroy_workqueue(pollworkqueue); 2474 destroy_workqueue(deadworkqueue); 2475 } 2476 2477 module_init(vub300_init); 2478 module_exit(vub300_exit); 2479 2480 MODULE_AUTHOR("Tony Olech <tony.olech@elandigitalsystems.com>"); 2481 MODULE_DESCRIPTION("VUB300 USB to SD/MMC/SDIO adapter driver"); 2482 MODULE_LICENSE("GPL"); 2483