xref: /openbmc/linux/drivers/mmc/host/sdhci-pci-gli.c (revision 228662b0)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Copyright (C) 2019 Genesys Logic, Inc.
4  *
5  * Authors: Ben Chuang <ben.chuang@genesyslogic.com.tw>
6  *
7  * Version: v0.9.0 (2019-08-08)
8  */
9 
10 #include <linux/bitfield.h>
11 #include <linux/bits.h>
12 #include <linux/pci.h>
13 #include <linux/mmc/mmc.h>
14 #include <linux/delay.h>
15 #include <linux/of.h>
16 #include <linux/iopoll.h>
17 #include "sdhci.h"
18 #include "sdhci-pci.h"
19 #include "cqhci.h"
20 
21 /*  Genesys Logic extra registers */
22 #define SDHCI_GLI_9750_WT         0x800
23 #define   SDHCI_GLI_9750_WT_EN      BIT(0)
24 #define   GLI_9750_WT_EN_ON	    0x1
25 #define   GLI_9750_WT_EN_OFF	    0x0
26 
27 #define SDHCI_GLI_9750_CFG2          0x848
28 #define   SDHCI_GLI_9750_CFG2_L1DLY    GENMASK(28, 24)
29 #define   GLI_9750_CFG2_L1DLY_VALUE    0x1F
30 
31 #define SDHCI_GLI_9750_DRIVING      0x860
32 #define   SDHCI_GLI_9750_DRIVING_1    GENMASK(11, 0)
33 #define   SDHCI_GLI_9750_DRIVING_2    GENMASK(27, 26)
34 #define   GLI_9750_DRIVING_1_VALUE    0xFFF
35 #define   GLI_9750_DRIVING_2_VALUE    0x3
36 #define   SDHCI_GLI_9750_SEL_1        BIT(29)
37 #define   SDHCI_GLI_9750_SEL_2        BIT(31)
38 #define   SDHCI_GLI_9750_ALL_RST      (BIT(24)|BIT(25)|BIT(28)|BIT(30))
39 
40 #define SDHCI_GLI_9750_PLL	      0x864
41 #define   SDHCI_GLI_9750_PLL_LDIV       GENMASK(9, 0)
42 #define   SDHCI_GLI_9750_PLL_PDIV       GENMASK(14, 12)
43 #define   SDHCI_GLI_9750_PLL_DIR        BIT(15)
44 #define   SDHCI_GLI_9750_PLL_TX2_INV    BIT(23)
45 #define   SDHCI_GLI_9750_PLL_TX2_DLY    GENMASK(22, 20)
46 #define   GLI_9750_PLL_TX2_INV_VALUE    0x1
47 #define   GLI_9750_PLL_TX2_DLY_VALUE    0x0
48 #define   SDHCI_GLI_9750_PLLSSC_STEP    GENMASK(28, 24)
49 #define   SDHCI_GLI_9750_PLLSSC_EN      BIT(31)
50 
51 #define SDHCI_GLI_9750_PLLSSC        0x86C
52 #define   SDHCI_GLI_9750_PLLSSC_PPM    GENMASK(31, 16)
53 
54 #define SDHCI_GLI_9750_SW_CTRL      0x874
55 #define   SDHCI_GLI_9750_SW_CTRL_4    GENMASK(7, 6)
56 #define   GLI_9750_SW_CTRL_4_VALUE    0x3
57 
58 #define SDHCI_GLI_9750_MISC            0x878
59 #define   SDHCI_GLI_9750_MISC_TX1_INV    BIT(2)
60 #define   SDHCI_GLI_9750_MISC_RX_INV     BIT(3)
61 #define   SDHCI_GLI_9750_MISC_TX1_DLY    GENMASK(6, 4)
62 #define   GLI_9750_MISC_TX1_INV_VALUE    0x0
63 #define   GLI_9750_MISC_RX_INV_ON        0x1
64 #define   GLI_9750_MISC_RX_INV_OFF       0x0
65 #define   GLI_9750_MISC_RX_INV_VALUE     GLI_9750_MISC_RX_INV_OFF
66 #define   GLI_9750_MISC_TX1_DLY_VALUE    0x5
67 #define   SDHCI_GLI_9750_MISC_SSC_OFF    BIT(26)
68 
69 #define SDHCI_GLI_9750_TUNING_CONTROL	          0x540
70 #define   SDHCI_GLI_9750_TUNING_CONTROL_EN          BIT(4)
71 #define   GLI_9750_TUNING_CONTROL_EN_ON             0x1
72 #define   GLI_9750_TUNING_CONTROL_EN_OFF            0x0
73 #define   SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_1    BIT(16)
74 #define   SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_2    GENMASK(20, 19)
75 #define   GLI_9750_TUNING_CONTROL_GLITCH_1_VALUE    0x1
76 #define   GLI_9750_TUNING_CONTROL_GLITCH_2_VALUE    0x2
77 
78 #define SDHCI_GLI_9750_TUNING_PARAMETERS           0x544
79 #define   SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY    GENMASK(2, 0)
80 #define   GLI_9750_TUNING_PARAMETERS_RX_DLY_VALUE    0x1
81 
82 #define SDHCI_GLI_9763E_CTRL_HS400  0x7
83 
84 #define SDHCI_GLI_9763E_HS400_ES_REG      0x52C
85 #define   SDHCI_GLI_9763E_HS400_ES_BIT      BIT(8)
86 
87 #define PCIE_GLI_9763E_VHS	 0x884
88 #define   GLI_9763E_VHS_REV	   GENMASK(19, 16)
89 #define   GLI_9763E_VHS_REV_R      0x0
90 #define   GLI_9763E_VHS_REV_M      0x1
91 #define   GLI_9763E_VHS_REV_W      0x2
92 #define PCIE_GLI_9763E_MB	 0x888
93 #define   GLI_9763E_MB_CMDQ_OFF	   BIT(19)
94 #define   GLI_9763E_MB_ERP_ON      BIT(7)
95 #define PCIE_GLI_9763E_SCR	 0x8E0
96 #define   GLI_9763E_SCR_AXI_REQ	   BIT(9)
97 
98 #define PCIE_GLI_9763E_CFG2      0x8A4
99 #define   GLI_9763E_CFG2_L1DLY     GENMASK(28, 19)
100 #define   GLI_9763E_CFG2_L1DLY_MID 0x54
101 
102 #define PCIE_GLI_9763E_MMC_CTRL  0x960
103 #define   GLI_9763E_HS400_SLOW     BIT(3)
104 
105 #define PCIE_GLI_9763E_CLKRXDLY  0x934
106 #define   GLI_9763E_HS400_RXDLY    GENMASK(31, 28)
107 #define   GLI_9763E_HS400_RXDLY_5  0x5
108 
109 #define SDHCI_GLI_9763E_CQE_BASE_ADDR	 0x200
110 #define GLI_9763E_CQE_TRNS_MODE	   (SDHCI_TRNS_MULTI | \
111 				    SDHCI_TRNS_BLK_CNT_EN | \
112 				    SDHCI_TRNS_DMA)
113 
114 #define PCI_GLI_9755_WT       0x800
115 #define   PCI_GLI_9755_WT_EN    BIT(0)
116 #define   GLI_9755_WT_EN_ON     0x1
117 #define   GLI_9755_WT_EN_OFF    0x0
118 
119 #define PCI_GLI_9755_PECONF   0x44
120 #define   PCI_GLI_9755_LFCLK    GENMASK(14, 12)
121 #define   PCI_GLI_9755_DMACLK   BIT(29)
122 #define   PCI_GLI_9755_INVERT_CD  BIT(30)
123 #define   PCI_GLI_9755_INVERT_WP  BIT(31)
124 
125 #define PCI_GLI_9755_CFG2          0x48
126 #define   PCI_GLI_9755_CFG2_L1DLY    GENMASK(28, 24)
127 #define   GLI_9755_CFG2_L1DLY_VALUE  0x1F
128 
129 #define PCI_GLI_9755_PLL            0x64
130 #define   PCI_GLI_9755_PLL_LDIV       GENMASK(9, 0)
131 #define   PCI_GLI_9755_PLL_PDIV       GENMASK(14, 12)
132 #define   PCI_GLI_9755_PLL_DIR        BIT(15)
133 #define   PCI_GLI_9755_PLLSSC_STEP    GENMASK(28, 24)
134 #define   PCI_GLI_9755_PLLSSC_EN      BIT(31)
135 
136 #define PCI_GLI_9755_PLLSSC        0x68
137 #define   PCI_GLI_9755_PLLSSC_PPM    GENMASK(15, 0)
138 
139 #define PCI_GLI_9755_SerDes  0x70
140 #define PCI_GLI_9755_SCP_DIS   BIT(19)
141 
142 #define PCI_GLI_9755_MISC	    0x78
143 #define   PCI_GLI_9755_MISC_SSC_OFF    BIT(26)
144 
145 #define GLI_MAX_TUNING_LOOP 40
146 
147 /* Genesys Logic chipset */
148 static inline void gl9750_wt_on(struct sdhci_host *host)
149 {
150 	u32 wt_value;
151 	u32 wt_enable;
152 
153 	wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT);
154 	wt_enable = FIELD_GET(SDHCI_GLI_9750_WT_EN, wt_value);
155 
156 	if (wt_enable == GLI_9750_WT_EN_ON)
157 		return;
158 
159 	wt_value &= ~SDHCI_GLI_9750_WT_EN;
160 	wt_value |= FIELD_PREP(SDHCI_GLI_9750_WT_EN, GLI_9750_WT_EN_ON);
161 
162 	sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT);
163 }
164 
165 static inline void gl9750_wt_off(struct sdhci_host *host)
166 {
167 	u32 wt_value;
168 	u32 wt_enable;
169 
170 	wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT);
171 	wt_enable = FIELD_GET(SDHCI_GLI_9750_WT_EN, wt_value);
172 
173 	if (wt_enable == GLI_9750_WT_EN_OFF)
174 		return;
175 
176 	wt_value &= ~SDHCI_GLI_9750_WT_EN;
177 	wt_value |= FIELD_PREP(SDHCI_GLI_9750_WT_EN, GLI_9750_WT_EN_OFF);
178 
179 	sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT);
180 }
181 
182 static void gli_set_9750(struct sdhci_host *host)
183 {
184 	u32 driving_value;
185 	u32 pll_value;
186 	u32 sw_ctrl_value;
187 	u32 misc_value;
188 	u32 parameter_value;
189 	u32 control_value;
190 	u16 ctrl2;
191 
192 	gl9750_wt_on(host);
193 
194 	driving_value = sdhci_readl(host, SDHCI_GLI_9750_DRIVING);
195 	pll_value = sdhci_readl(host, SDHCI_GLI_9750_PLL);
196 	sw_ctrl_value = sdhci_readl(host, SDHCI_GLI_9750_SW_CTRL);
197 	misc_value = sdhci_readl(host, SDHCI_GLI_9750_MISC);
198 	parameter_value = sdhci_readl(host, SDHCI_GLI_9750_TUNING_PARAMETERS);
199 	control_value = sdhci_readl(host, SDHCI_GLI_9750_TUNING_CONTROL);
200 
201 	driving_value &= ~(SDHCI_GLI_9750_DRIVING_1);
202 	driving_value &= ~(SDHCI_GLI_9750_DRIVING_2);
203 	driving_value |= FIELD_PREP(SDHCI_GLI_9750_DRIVING_1,
204 				    GLI_9750_DRIVING_1_VALUE);
205 	driving_value |= FIELD_PREP(SDHCI_GLI_9750_DRIVING_2,
206 				    GLI_9750_DRIVING_2_VALUE);
207 	driving_value &= ~(SDHCI_GLI_9750_SEL_1|SDHCI_GLI_9750_SEL_2|SDHCI_GLI_9750_ALL_RST);
208 	driving_value |= SDHCI_GLI_9750_SEL_2;
209 	sdhci_writel(host, driving_value, SDHCI_GLI_9750_DRIVING);
210 
211 	sw_ctrl_value &= ~SDHCI_GLI_9750_SW_CTRL_4;
212 	sw_ctrl_value |= FIELD_PREP(SDHCI_GLI_9750_SW_CTRL_4,
213 				    GLI_9750_SW_CTRL_4_VALUE);
214 	sdhci_writel(host, sw_ctrl_value, SDHCI_GLI_9750_SW_CTRL);
215 
216 	/* reset the tuning flow after reinit and before starting tuning */
217 	pll_value &= ~SDHCI_GLI_9750_PLL_TX2_INV;
218 	pll_value &= ~SDHCI_GLI_9750_PLL_TX2_DLY;
219 	pll_value |= FIELD_PREP(SDHCI_GLI_9750_PLL_TX2_INV,
220 				GLI_9750_PLL_TX2_INV_VALUE);
221 	pll_value |= FIELD_PREP(SDHCI_GLI_9750_PLL_TX2_DLY,
222 				GLI_9750_PLL_TX2_DLY_VALUE);
223 
224 	misc_value &= ~SDHCI_GLI_9750_MISC_TX1_INV;
225 	misc_value &= ~SDHCI_GLI_9750_MISC_RX_INV;
226 	misc_value &= ~SDHCI_GLI_9750_MISC_TX1_DLY;
227 	misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_TX1_INV,
228 				 GLI_9750_MISC_TX1_INV_VALUE);
229 	misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_RX_INV,
230 				 GLI_9750_MISC_RX_INV_VALUE);
231 	misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_TX1_DLY,
232 				 GLI_9750_MISC_TX1_DLY_VALUE);
233 
234 	parameter_value &= ~SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY;
235 	parameter_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY,
236 				      GLI_9750_TUNING_PARAMETERS_RX_DLY_VALUE);
237 
238 	control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_1;
239 	control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_2;
240 	control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_1,
241 				    GLI_9750_TUNING_CONTROL_GLITCH_1_VALUE);
242 	control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_2,
243 				    GLI_9750_TUNING_CONTROL_GLITCH_2_VALUE);
244 
245 	sdhci_writel(host, pll_value, SDHCI_GLI_9750_PLL);
246 	sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC);
247 
248 	/* disable tuned clk */
249 	ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
250 	ctrl2 &= ~SDHCI_CTRL_TUNED_CLK;
251 	sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2);
252 
253 	/* enable tuning parameters control */
254 	control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_EN;
255 	control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_EN,
256 				    GLI_9750_TUNING_CONTROL_EN_ON);
257 	sdhci_writel(host, control_value, SDHCI_GLI_9750_TUNING_CONTROL);
258 
259 	/* write tuning parameters */
260 	sdhci_writel(host, parameter_value, SDHCI_GLI_9750_TUNING_PARAMETERS);
261 
262 	/* disable tuning parameters control */
263 	control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_EN;
264 	control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_EN,
265 				    GLI_9750_TUNING_CONTROL_EN_OFF);
266 	sdhci_writel(host, control_value, SDHCI_GLI_9750_TUNING_CONTROL);
267 
268 	/* clear tuned clk */
269 	ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
270 	ctrl2 &= ~SDHCI_CTRL_TUNED_CLK;
271 	sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2);
272 
273 	gl9750_wt_off(host);
274 }
275 
276 static void gli_set_9750_rx_inv(struct sdhci_host *host, bool b)
277 {
278 	u32 misc_value;
279 
280 	gl9750_wt_on(host);
281 
282 	misc_value = sdhci_readl(host, SDHCI_GLI_9750_MISC);
283 	misc_value &= ~SDHCI_GLI_9750_MISC_RX_INV;
284 	if (b) {
285 		misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_RX_INV,
286 					 GLI_9750_MISC_RX_INV_ON);
287 	} else {
288 		misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_RX_INV,
289 					 GLI_9750_MISC_RX_INV_OFF);
290 	}
291 	sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC);
292 
293 	gl9750_wt_off(host);
294 }
295 
296 static int __sdhci_execute_tuning_9750(struct sdhci_host *host, u32 opcode)
297 {
298 	int i;
299 	int rx_inv;
300 
301 	for (rx_inv = 0; rx_inv < 2; rx_inv++) {
302 		gli_set_9750_rx_inv(host, !!rx_inv);
303 		sdhci_start_tuning(host);
304 
305 		for (i = 0; i < GLI_MAX_TUNING_LOOP; i++) {
306 			u16 ctrl;
307 
308 			sdhci_send_tuning(host, opcode);
309 
310 			if (!host->tuning_done) {
311 				sdhci_abort_tuning(host, opcode);
312 				break;
313 			}
314 
315 			ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
316 			if (!(ctrl & SDHCI_CTRL_EXEC_TUNING)) {
317 				if (ctrl & SDHCI_CTRL_TUNED_CLK)
318 					return 0; /* Success! */
319 				break;
320 			}
321 		}
322 	}
323 	if (!host->tuning_done) {
324 		pr_info("%s: Tuning timeout, falling back to fixed sampling clock\n",
325 			mmc_hostname(host->mmc));
326 		return -ETIMEDOUT;
327 	}
328 
329 	pr_info("%s: Tuning failed, falling back to fixed sampling clock\n",
330 		mmc_hostname(host->mmc));
331 	sdhci_reset_tuning(host);
332 
333 	return -EAGAIN;
334 }
335 
336 static int gl9750_execute_tuning(struct sdhci_host *host, u32 opcode)
337 {
338 	host->mmc->retune_period = 0;
339 	if (host->tuning_mode == SDHCI_TUNING_MODE_1)
340 		host->mmc->retune_period = host->tuning_count;
341 
342 	gli_set_9750(host);
343 	host->tuning_err = __sdhci_execute_tuning_9750(host, opcode);
344 	sdhci_end_tuning(host);
345 
346 	return 0;
347 }
348 
349 static void gl9750_disable_ssc_pll(struct sdhci_host *host)
350 {
351 	u32 pll;
352 
353 	gl9750_wt_on(host);
354 	pll = sdhci_readl(host, SDHCI_GLI_9750_PLL);
355 	pll &= ~(SDHCI_GLI_9750_PLL_DIR | SDHCI_GLI_9750_PLLSSC_EN);
356 	sdhci_writel(host, pll, SDHCI_GLI_9750_PLL);
357 	gl9750_wt_off(host);
358 }
359 
360 static void gl9750_set_pll(struct sdhci_host *host, u8 dir, u16 ldiv, u8 pdiv)
361 {
362 	u32 pll;
363 
364 	gl9750_wt_on(host);
365 	pll = sdhci_readl(host, SDHCI_GLI_9750_PLL);
366 	pll &= ~(SDHCI_GLI_9750_PLL_LDIV |
367 		 SDHCI_GLI_9750_PLL_PDIV |
368 		 SDHCI_GLI_9750_PLL_DIR);
369 	pll |= FIELD_PREP(SDHCI_GLI_9750_PLL_LDIV, ldiv) |
370 	       FIELD_PREP(SDHCI_GLI_9750_PLL_PDIV, pdiv) |
371 	       FIELD_PREP(SDHCI_GLI_9750_PLL_DIR, dir);
372 	sdhci_writel(host, pll, SDHCI_GLI_9750_PLL);
373 	gl9750_wt_off(host);
374 
375 	/* wait for pll stable */
376 	mdelay(1);
377 }
378 
379 static bool gl9750_ssc_enable(struct sdhci_host *host)
380 {
381 	u32 misc;
382 	u8 off;
383 
384 	gl9750_wt_on(host);
385 	misc = sdhci_readl(host, SDHCI_GLI_9750_MISC);
386 	off = FIELD_GET(SDHCI_GLI_9750_MISC_SSC_OFF, misc);
387 	gl9750_wt_off(host);
388 
389 	return !off;
390 }
391 
392 static void gl9750_set_ssc(struct sdhci_host *host, u8 enable, u8 step, u16 ppm)
393 {
394 	u32 pll;
395 	u32 ssc;
396 
397 	gl9750_wt_on(host);
398 	pll = sdhci_readl(host, SDHCI_GLI_9750_PLL);
399 	ssc = sdhci_readl(host, SDHCI_GLI_9750_PLLSSC);
400 	pll &= ~(SDHCI_GLI_9750_PLLSSC_STEP |
401 		 SDHCI_GLI_9750_PLLSSC_EN);
402 	ssc &= ~SDHCI_GLI_9750_PLLSSC_PPM;
403 	pll |= FIELD_PREP(SDHCI_GLI_9750_PLLSSC_STEP, step) |
404 	       FIELD_PREP(SDHCI_GLI_9750_PLLSSC_EN, enable);
405 	ssc |= FIELD_PREP(SDHCI_GLI_9750_PLLSSC_PPM, ppm);
406 	sdhci_writel(host, ssc, SDHCI_GLI_9750_PLLSSC);
407 	sdhci_writel(host, pll, SDHCI_GLI_9750_PLL);
408 	gl9750_wt_off(host);
409 }
410 
411 static void gl9750_set_ssc_pll_205mhz(struct sdhci_host *host)
412 {
413 	bool enable = gl9750_ssc_enable(host);
414 
415 	/* set pll to 205MHz and ssc */
416 	gl9750_set_ssc(host, enable, 0xF, 0x5A1D);
417 	gl9750_set_pll(host, 0x1, 0x246, 0x0);
418 }
419 
420 static void gl9750_set_ssc_pll_100mhz(struct sdhci_host *host)
421 {
422 	bool enable = gl9750_ssc_enable(host);
423 
424 	/* set pll to 100MHz and ssc */
425 	gl9750_set_ssc(host, enable, 0xE, 0x51EC);
426 	gl9750_set_pll(host, 0x1, 0x244, 0x1);
427 }
428 
429 static void gl9750_set_ssc_pll_50mhz(struct sdhci_host *host)
430 {
431 	bool enable = gl9750_ssc_enable(host);
432 
433 	/* set pll to 50MHz and ssc */
434 	gl9750_set_ssc(host, enable, 0xE, 0x51EC);
435 	gl9750_set_pll(host, 0x1, 0x244, 0x3);
436 }
437 
438 static void sdhci_gl9750_set_clock(struct sdhci_host *host, unsigned int clock)
439 {
440 	struct mmc_ios *ios = &host->mmc->ios;
441 	u16 clk;
442 
443 	host->mmc->actual_clock = 0;
444 
445 	gl9750_disable_ssc_pll(host);
446 	sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
447 
448 	if (clock == 0)
449 		return;
450 
451 	clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock);
452 	if (clock == 200000000 && ios->timing == MMC_TIMING_UHS_SDR104) {
453 		host->mmc->actual_clock = 205000000;
454 		gl9750_set_ssc_pll_205mhz(host);
455 	} else if (clock == 100000000) {
456 		gl9750_set_ssc_pll_100mhz(host);
457 	} else if (clock == 50000000) {
458 		gl9750_set_ssc_pll_50mhz(host);
459 	}
460 
461 	sdhci_enable_clk(host, clk);
462 }
463 
464 static void gl9750_hw_setting(struct sdhci_host *host)
465 {
466 	u32 value;
467 
468 	gl9750_wt_on(host);
469 
470 	value = sdhci_readl(host, SDHCI_GLI_9750_CFG2);
471 	value &= ~SDHCI_GLI_9750_CFG2_L1DLY;
472 	/* set ASPM L1 entry delay to 7.9us */
473 	value |= FIELD_PREP(SDHCI_GLI_9750_CFG2_L1DLY,
474 			    GLI_9750_CFG2_L1DLY_VALUE);
475 	sdhci_writel(host, value, SDHCI_GLI_9750_CFG2);
476 
477 	gl9750_wt_off(host);
478 }
479 
480 static void gli_pcie_enable_msi(struct sdhci_pci_slot *slot)
481 {
482 	int ret;
483 
484 	ret = pci_alloc_irq_vectors(slot->chip->pdev, 1, 1,
485 				    PCI_IRQ_MSI | PCI_IRQ_MSIX);
486 	if (ret < 0) {
487 		pr_warn("%s: enable PCI MSI failed, error=%d\n",
488 		       mmc_hostname(slot->host->mmc), ret);
489 		return;
490 	}
491 
492 	slot->host->irq = pci_irq_vector(slot->chip->pdev, 0);
493 }
494 
495 static inline void gl9755_wt_on(struct pci_dev *pdev)
496 {
497 	u32 wt_value;
498 	u32 wt_enable;
499 
500 	pci_read_config_dword(pdev, PCI_GLI_9755_WT, &wt_value);
501 	wt_enable = FIELD_GET(PCI_GLI_9755_WT_EN, wt_value);
502 
503 	if (wt_enable == GLI_9755_WT_EN_ON)
504 		return;
505 
506 	wt_value &= ~PCI_GLI_9755_WT_EN;
507 	wt_value |= FIELD_PREP(PCI_GLI_9755_WT_EN, GLI_9755_WT_EN_ON);
508 
509 	pci_write_config_dword(pdev, PCI_GLI_9755_WT, wt_value);
510 }
511 
512 static inline void gl9755_wt_off(struct pci_dev *pdev)
513 {
514 	u32 wt_value;
515 	u32 wt_enable;
516 
517 	pci_read_config_dword(pdev, PCI_GLI_9755_WT, &wt_value);
518 	wt_enable = FIELD_GET(PCI_GLI_9755_WT_EN, wt_value);
519 
520 	if (wt_enable == GLI_9755_WT_EN_OFF)
521 		return;
522 
523 	wt_value &= ~PCI_GLI_9755_WT_EN;
524 	wt_value |= FIELD_PREP(PCI_GLI_9755_WT_EN, GLI_9755_WT_EN_OFF);
525 
526 	pci_write_config_dword(pdev, PCI_GLI_9755_WT, wt_value);
527 }
528 
529 static void gl9755_disable_ssc_pll(struct pci_dev *pdev)
530 {
531 	u32 pll;
532 
533 	gl9755_wt_on(pdev);
534 	pci_read_config_dword(pdev, PCI_GLI_9755_PLL, &pll);
535 	pll &= ~(PCI_GLI_9755_PLL_DIR | PCI_GLI_9755_PLLSSC_EN);
536 	pci_write_config_dword(pdev, PCI_GLI_9755_PLL, pll);
537 	gl9755_wt_off(pdev);
538 }
539 
540 static void gl9755_set_pll(struct pci_dev *pdev, u8 dir, u16 ldiv, u8 pdiv)
541 {
542 	u32 pll;
543 
544 	gl9755_wt_on(pdev);
545 	pci_read_config_dword(pdev, PCI_GLI_9755_PLL, &pll);
546 	pll &= ~(PCI_GLI_9755_PLL_LDIV |
547 		 PCI_GLI_9755_PLL_PDIV |
548 		 PCI_GLI_9755_PLL_DIR);
549 	pll |= FIELD_PREP(PCI_GLI_9755_PLL_LDIV, ldiv) |
550 	       FIELD_PREP(PCI_GLI_9755_PLL_PDIV, pdiv) |
551 	       FIELD_PREP(PCI_GLI_9755_PLL_DIR, dir);
552 	pci_write_config_dword(pdev, PCI_GLI_9755_PLL, pll);
553 	gl9755_wt_off(pdev);
554 
555 	/* wait for pll stable */
556 	mdelay(1);
557 }
558 
559 static bool gl9755_ssc_enable(struct pci_dev *pdev)
560 {
561 	u32 misc;
562 	u8 off;
563 
564 	gl9755_wt_on(pdev);
565 	pci_read_config_dword(pdev, PCI_GLI_9755_MISC, &misc);
566 	off = FIELD_GET(PCI_GLI_9755_MISC_SSC_OFF, misc);
567 	gl9755_wt_off(pdev);
568 
569 	return !off;
570 }
571 
572 static void gl9755_set_ssc(struct pci_dev *pdev, u8 enable, u8 step, u16 ppm)
573 {
574 	u32 pll;
575 	u32 ssc;
576 
577 	gl9755_wt_on(pdev);
578 	pci_read_config_dword(pdev, PCI_GLI_9755_PLL, &pll);
579 	pci_read_config_dword(pdev, PCI_GLI_9755_PLLSSC, &ssc);
580 	pll &= ~(PCI_GLI_9755_PLLSSC_STEP |
581 		 PCI_GLI_9755_PLLSSC_EN);
582 	ssc &= ~PCI_GLI_9755_PLLSSC_PPM;
583 	pll |= FIELD_PREP(PCI_GLI_9755_PLLSSC_STEP, step) |
584 	       FIELD_PREP(PCI_GLI_9755_PLLSSC_EN, enable);
585 	ssc |= FIELD_PREP(PCI_GLI_9755_PLLSSC_PPM, ppm);
586 	pci_write_config_dword(pdev, PCI_GLI_9755_PLLSSC, ssc);
587 	pci_write_config_dword(pdev, PCI_GLI_9755_PLL, pll);
588 	gl9755_wt_off(pdev);
589 }
590 
591 static void gl9755_set_ssc_pll_205mhz(struct pci_dev *pdev)
592 {
593 	bool enable = gl9755_ssc_enable(pdev);
594 
595 	/* set pll to 205MHz and ssc */
596 	gl9755_set_ssc(pdev, enable, 0xF, 0x5A1D);
597 	gl9755_set_pll(pdev, 0x1, 0x246, 0x0);
598 }
599 
600 static void gl9755_set_ssc_pll_100mhz(struct pci_dev *pdev)
601 {
602 	bool enable = gl9755_ssc_enable(pdev);
603 
604 	/* set pll to 100MHz and ssc */
605 	gl9755_set_ssc(pdev, enable, 0xE, 0x51EC);
606 	gl9755_set_pll(pdev, 0x1, 0x244, 0x1);
607 }
608 
609 static void gl9755_set_ssc_pll_50mhz(struct pci_dev *pdev)
610 {
611 	bool enable = gl9755_ssc_enable(pdev);
612 
613 	/* set pll to 50MHz and ssc */
614 	gl9755_set_ssc(pdev, enable, 0xE, 0x51EC);
615 	gl9755_set_pll(pdev, 0x1, 0x244, 0x3);
616 }
617 
618 static void sdhci_gl9755_set_clock(struct sdhci_host *host, unsigned int clock)
619 {
620 	struct sdhci_pci_slot *slot = sdhci_priv(host);
621 	struct mmc_ios *ios = &host->mmc->ios;
622 	struct pci_dev *pdev;
623 	u16 clk;
624 
625 	pdev = slot->chip->pdev;
626 	host->mmc->actual_clock = 0;
627 
628 	gl9755_disable_ssc_pll(pdev);
629 	sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
630 
631 	if (clock == 0)
632 		return;
633 
634 	clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock);
635 	if (clock == 200000000 && ios->timing == MMC_TIMING_UHS_SDR104) {
636 		host->mmc->actual_clock = 205000000;
637 		gl9755_set_ssc_pll_205mhz(pdev);
638 	} else if (clock == 100000000) {
639 		gl9755_set_ssc_pll_100mhz(pdev);
640 	} else if (clock == 50000000) {
641 		gl9755_set_ssc_pll_50mhz(pdev);
642 	}
643 
644 	sdhci_enable_clk(host, clk);
645 }
646 
647 static void gl9755_hw_setting(struct sdhci_pci_slot *slot)
648 {
649 	struct pci_dev *pdev = slot->chip->pdev;
650 	u32 value;
651 
652 	gl9755_wt_on(pdev);
653 
654 	pci_read_config_dword(pdev, PCI_GLI_9755_PECONF, &value);
655 	/*
656 	 * Apple ARM64 platforms using these chips may have
657 	 * inverted CD/WP detection.
658 	 */
659 	if (of_property_read_bool(pdev->dev.of_node, "cd-inverted"))
660 		value |= PCI_GLI_9755_INVERT_CD;
661 	if (of_property_read_bool(pdev->dev.of_node, "wp-inverted"))
662 		value |= PCI_GLI_9755_INVERT_WP;
663 	value &= ~PCI_GLI_9755_LFCLK;
664 	value &= ~PCI_GLI_9755_DMACLK;
665 	pci_write_config_dword(pdev, PCI_GLI_9755_PECONF, value);
666 
667 	/* enable short circuit protection */
668 	pci_read_config_dword(pdev, PCI_GLI_9755_SerDes, &value);
669 	value &= ~PCI_GLI_9755_SCP_DIS;
670 	pci_write_config_dword(pdev, PCI_GLI_9755_SerDes, value);
671 
672 	pci_read_config_dword(pdev, PCI_GLI_9755_CFG2, &value);
673 	value &= ~PCI_GLI_9755_CFG2_L1DLY;
674 	/* set ASPM L1 entry delay to 7.9us */
675 	value |= FIELD_PREP(PCI_GLI_9755_CFG2_L1DLY,
676 			    GLI_9755_CFG2_L1DLY_VALUE);
677 	pci_write_config_dword(pdev, PCI_GLI_9755_CFG2, value);
678 
679 	gl9755_wt_off(pdev);
680 }
681 
682 static int gli_probe_slot_gl9750(struct sdhci_pci_slot *slot)
683 {
684 	struct sdhci_host *host = slot->host;
685 
686 	gl9750_hw_setting(host);
687 	gli_pcie_enable_msi(slot);
688 	slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
689 	sdhci_enable_v4_mode(host);
690 
691 	return 0;
692 }
693 
694 static int gli_probe_slot_gl9755(struct sdhci_pci_slot *slot)
695 {
696 	struct sdhci_host *host = slot->host;
697 
698 	gl9755_hw_setting(slot);
699 	gli_pcie_enable_msi(slot);
700 	slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
701 	sdhci_enable_v4_mode(host);
702 
703 	return 0;
704 }
705 
706 static void sdhci_gli_voltage_switch(struct sdhci_host *host)
707 {
708 	/*
709 	 * According to Section 3.6.1 signal voltage switch procedure in
710 	 * SD Host Controller Simplified Spec. 4.20, steps 6~8 are as
711 	 * follows:
712 	 * (6) Set 1.8V Signal Enable in the Host Control 2 register.
713 	 * (7) Wait 5ms. 1.8V voltage regulator shall be stable within this
714 	 *     period.
715 	 * (8) If 1.8V Signal Enable is cleared by Host Controller, go to
716 	 *     step (12).
717 	 *
718 	 * Wait 5ms after set 1.8V signal enable in Host Control 2 register
719 	 * to ensure 1.8V signal enable bit is set by GL9750/GL9755.
720 	 *
721 	 * ...however, the controller in the NUC10i3FNK4 (a 9755) requires
722 	 * slightly longer than 5ms before the control register reports that
723 	 * 1.8V is ready, and far longer still before the card will actually
724 	 * work reliably.
725 	 */
726 	usleep_range(100000, 110000);
727 }
728 
729 static void sdhci_gl9750_reset(struct sdhci_host *host, u8 mask)
730 {
731 	sdhci_reset(host, mask);
732 	gli_set_9750(host);
733 }
734 
735 static u32 sdhci_gl9750_readl(struct sdhci_host *host, int reg)
736 {
737 	u32 value;
738 
739 	value = readl(host->ioaddr + reg);
740 	if (unlikely(reg == SDHCI_MAX_CURRENT && !(value & 0xff)))
741 		value |= 0xc8;
742 
743 	return value;
744 }
745 
746 #ifdef CONFIG_PM_SLEEP
747 static int sdhci_pci_gli_resume(struct sdhci_pci_chip *chip)
748 {
749 	struct sdhci_pci_slot *slot = chip->slots[0];
750 
751 	pci_free_irq_vectors(slot->chip->pdev);
752 	gli_pcie_enable_msi(slot);
753 
754 	return sdhci_pci_resume_host(chip);
755 }
756 
757 static int sdhci_cqhci_gli_resume(struct sdhci_pci_chip *chip)
758 {
759 	struct sdhci_pci_slot *slot = chip->slots[0];
760 	int ret;
761 
762 	ret = sdhci_pci_gli_resume(chip);
763 	if (ret)
764 		return ret;
765 
766 	return cqhci_resume(slot->host->mmc);
767 }
768 
769 static int sdhci_cqhci_gli_suspend(struct sdhci_pci_chip *chip)
770 {
771 	struct sdhci_pci_slot *slot = chip->slots[0];
772 	int ret;
773 
774 	ret = cqhci_suspend(slot->host->mmc);
775 	if (ret)
776 		return ret;
777 
778 	return sdhci_suspend_host(slot->host);
779 }
780 #endif
781 
782 static void gl9763e_hs400_enhanced_strobe(struct mmc_host *mmc,
783 					  struct mmc_ios *ios)
784 {
785 	struct sdhci_host *host = mmc_priv(mmc);
786 	u32 val;
787 
788 	val = sdhci_readl(host, SDHCI_GLI_9763E_HS400_ES_REG);
789 	if (ios->enhanced_strobe)
790 		val |= SDHCI_GLI_9763E_HS400_ES_BIT;
791 	else
792 		val &= ~SDHCI_GLI_9763E_HS400_ES_BIT;
793 
794 	sdhci_writel(host, val, SDHCI_GLI_9763E_HS400_ES_REG);
795 }
796 
797 static void sdhci_set_gl9763e_signaling(struct sdhci_host *host,
798 					unsigned int timing)
799 {
800 	u16 ctrl_2;
801 
802 	ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
803 	ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
804 	if (timing == MMC_TIMING_MMC_HS200)
805 		ctrl_2 |= SDHCI_CTRL_UHS_SDR104;
806 	else if (timing == MMC_TIMING_MMC_HS)
807 		ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
808 	else if (timing == MMC_TIMING_MMC_DDR52)
809 		ctrl_2 |= SDHCI_CTRL_UHS_DDR50;
810 	else if (timing == MMC_TIMING_MMC_HS400)
811 		ctrl_2 |= SDHCI_GLI_9763E_CTRL_HS400;
812 
813 	sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
814 }
815 
816 static void sdhci_gl9763e_dumpregs(struct mmc_host *mmc)
817 {
818 	sdhci_dumpregs(mmc_priv(mmc));
819 }
820 
821 static void sdhci_gl9763e_cqe_pre_enable(struct mmc_host *mmc)
822 {
823 	struct cqhci_host *cq_host = mmc->cqe_private;
824 	u32 value;
825 
826 	value = cqhci_readl(cq_host, CQHCI_CFG);
827 	value |= CQHCI_ENABLE;
828 	cqhci_writel(cq_host, value, CQHCI_CFG);
829 }
830 
831 static void sdhci_gl9763e_cqe_enable(struct mmc_host *mmc)
832 {
833 	struct sdhci_host *host = mmc_priv(mmc);
834 
835 	sdhci_writew(host, GLI_9763E_CQE_TRNS_MODE, SDHCI_TRANSFER_MODE);
836 	sdhci_cqe_enable(mmc);
837 }
838 
839 static u32 sdhci_gl9763e_cqhci_irq(struct sdhci_host *host, u32 intmask)
840 {
841 	int cmd_error = 0;
842 	int data_error = 0;
843 
844 	if (!sdhci_cqe_irq(host, intmask, &cmd_error, &data_error))
845 		return intmask;
846 
847 	cqhci_irq(host->mmc, intmask, cmd_error, data_error);
848 
849 	return 0;
850 }
851 
852 static void sdhci_gl9763e_cqe_post_disable(struct mmc_host *mmc)
853 {
854 	struct sdhci_host *host = mmc_priv(mmc);
855 	struct cqhci_host *cq_host = mmc->cqe_private;
856 	u32 value;
857 
858 	value = cqhci_readl(cq_host, CQHCI_CFG);
859 	value &= ~CQHCI_ENABLE;
860 	cqhci_writel(cq_host, value, CQHCI_CFG);
861 	sdhci_writew(host, 0x0, SDHCI_TRANSFER_MODE);
862 }
863 
864 static const struct cqhci_host_ops sdhci_gl9763e_cqhci_ops = {
865 	.enable         = sdhci_gl9763e_cqe_enable,
866 	.disable        = sdhci_cqe_disable,
867 	.dumpregs       = sdhci_gl9763e_dumpregs,
868 	.pre_enable     = sdhci_gl9763e_cqe_pre_enable,
869 	.post_disable   = sdhci_gl9763e_cqe_post_disable,
870 };
871 
872 static int gl9763e_add_host(struct sdhci_pci_slot *slot)
873 {
874 	struct device *dev = &slot->chip->pdev->dev;
875 	struct sdhci_host *host = slot->host;
876 	struct cqhci_host *cq_host;
877 	bool dma64;
878 	int ret;
879 
880 	ret = sdhci_setup_host(host);
881 	if (ret)
882 		return ret;
883 
884 	cq_host = devm_kzalloc(dev, sizeof(*cq_host), GFP_KERNEL);
885 	if (!cq_host) {
886 		ret = -ENOMEM;
887 		goto cleanup;
888 	}
889 
890 	cq_host->mmio = host->ioaddr + SDHCI_GLI_9763E_CQE_BASE_ADDR;
891 	cq_host->ops = &sdhci_gl9763e_cqhci_ops;
892 
893 	dma64 = host->flags & SDHCI_USE_64_BIT_DMA;
894 	if (dma64)
895 		cq_host->caps |= CQHCI_TASK_DESC_SZ_128;
896 
897 	ret = cqhci_init(cq_host, host->mmc, dma64);
898 	if (ret)
899 		goto cleanup;
900 
901 	ret = __sdhci_add_host(host);
902 	if (ret)
903 		goto cleanup;
904 
905 	return 0;
906 
907 cleanup:
908 	sdhci_cleanup_host(host);
909 	return ret;
910 }
911 
912 static void sdhci_gl9763e_reset(struct sdhci_host *host, u8 mask)
913 {
914 	if ((host->mmc->caps2 & MMC_CAP2_CQE) && (mask & SDHCI_RESET_ALL) &&
915 	    host->mmc->cqe_private)
916 		cqhci_deactivate(host->mmc);
917 	sdhci_reset(host, mask);
918 }
919 
920 static void gli_set_gl9763e(struct sdhci_pci_slot *slot)
921 {
922 	struct pci_dev *pdev = slot->chip->pdev;
923 	u32 value;
924 
925 	pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value);
926 	value &= ~GLI_9763E_VHS_REV;
927 	value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_W);
928 	pci_write_config_dword(pdev, PCIE_GLI_9763E_VHS, value);
929 
930 	pci_read_config_dword(pdev, PCIE_GLI_9763E_SCR, &value);
931 	value |= GLI_9763E_SCR_AXI_REQ;
932 	pci_write_config_dword(pdev, PCIE_GLI_9763E_SCR, value);
933 
934 	pci_read_config_dword(pdev, PCIE_GLI_9763E_MMC_CTRL, &value);
935 	value &= ~GLI_9763E_HS400_SLOW;
936 	pci_write_config_dword(pdev, PCIE_GLI_9763E_MMC_CTRL, value);
937 
938 	pci_read_config_dword(pdev, PCIE_GLI_9763E_CFG2, &value);
939 	value &= ~GLI_9763E_CFG2_L1DLY;
940 	/* set ASPM L1 entry delay to 21us */
941 	value |= FIELD_PREP(GLI_9763E_CFG2_L1DLY, GLI_9763E_CFG2_L1DLY_MID);
942 	pci_write_config_dword(pdev, PCIE_GLI_9763E_CFG2, value);
943 
944 	pci_read_config_dword(pdev, PCIE_GLI_9763E_CLKRXDLY, &value);
945 	value &= ~GLI_9763E_HS400_RXDLY;
946 	value |= FIELD_PREP(GLI_9763E_HS400_RXDLY, GLI_9763E_HS400_RXDLY_5);
947 	pci_write_config_dword(pdev, PCIE_GLI_9763E_CLKRXDLY, value);
948 
949 	pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value);
950 	value &= ~GLI_9763E_VHS_REV;
951 	value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_R);
952 	pci_write_config_dword(pdev, PCIE_GLI_9763E_VHS, value);
953 }
954 
955 #ifdef CONFIG_PM
956 static int gl9763e_runtime_suspend(struct sdhci_pci_chip *chip)
957 {
958 	struct sdhci_pci_slot *slot = chip->slots[0];
959 	struct sdhci_host *host = slot->host;
960 	u16 clock;
961 
962 	clock = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
963 	clock &= ~(SDHCI_CLOCK_PLL_EN | SDHCI_CLOCK_CARD_EN);
964 	sdhci_writew(host, clock, SDHCI_CLOCK_CONTROL);
965 
966 	return 0;
967 }
968 
969 static int gl9763e_runtime_resume(struct sdhci_pci_chip *chip)
970 {
971 	struct sdhci_pci_slot *slot = chip->slots[0];
972 	struct sdhci_host *host = slot->host;
973 	u16 clock;
974 
975 	clock = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
976 
977 	clock |= SDHCI_CLOCK_PLL_EN;
978 	clock &= ~SDHCI_CLOCK_INT_STABLE;
979 	sdhci_writew(host, clock, SDHCI_CLOCK_CONTROL);
980 
981 	/* Wait max 150 ms */
982 	if (read_poll_timeout(sdhci_readw, clock, (clock & SDHCI_CLOCK_INT_STABLE),
983 			      1000, 150000, false, host, SDHCI_CLOCK_CONTROL)) {
984 		pr_err("%s: PLL clock never stabilised.\n",
985 		       mmc_hostname(host->mmc));
986 		sdhci_dumpregs(host);
987 	}
988 
989 	clock |= SDHCI_CLOCK_CARD_EN;
990 	sdhci_writew(host, clock, SDHCI_CLOCK_CONTROL);
991 
992 	return 0;
993 }
994 #endif
995 
996 static int gli_probe_slot_gl9763e(struct sdhci_pci_slot *slot)
997 {
998 	struct pci_dev *pdev = slot->chip->pdev;
999 	struct sdhci_host *host = slot->host;
1000 	u32 value;
1001 
1002 	host->mmc->caps |= MMC_CAP_8_BIT_DATA |
1003 			   MMC_CAP_1_8V_DDR |
1004 			   MMC_CAP_NONREMOVABLE;
1005 	host->mmc->caps2 |= MMC_CAP2_HS200_1_8V_SDR |
1006 			    MMC_CAP2_HS400_1_8V |
1007 			    MMC_CAP2_HS400_ES |
1008 			    MMC_CAP2_NO_SDIO |
1009 			    MMC_CAP2_NO_SD;
1010 
1011 	pci_read_config_dword(pdev, PCIE_GLI_9763E_MB, &value);
1012 	if (!(value & GLI_9763E_MB_CMDQ_OFF))
1013 		if (value & GLI_9763E_MB_ERP_ON)
1014 			host->mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD;
1015 
1016 	gli_pcie_enable_msi(slot);
1017 	host->mmc_host_ops.hs400_enhanced_strobe =
1018 					gl9763e_hs400_enhanced_strobe;
1019 	gli_set_gl9763e(slot);
1020 	sdhci_enable_v4_mode(host);
1021 
1022 	return 0;
1023 }
1024 
1025 #define REG_OFFSET_IN_BITS(reg) ((reg) << 3 & 0x18)
1026 
1027 static u16 sdhci_gli_readw(struct sdhci_host *host, int reg)
1028 {
1029 	u32 val = readl(host->ioaddr + (reg & ~3));
1030 	u16 word;
1031 
1032 	word = (val >> REG_OFFSET_IN_BITS(reg)) & 0xffff;
1033 	return word;
1034 }
1035 
1036 static u8 sdhci_gli_readb(struct sdhci_host *host, int reg)
1037 {
1038 	u32 val = readl(host->ioaddr + (reg & ~3));
1039 	u8 byte = (val >> REG_OFFSET_IN_BITS(reg)) & 0xff;
1040 
1041 	return byte;
1042 }
1043 
1044 static const struct sdhci_ops sdhci_gl9755_ops = {
1045 	.read_w			= sdhci_gli_readw,
1046 	.read_b			= sdhci_gli_readb,
1047 	.set_clock		= sdhci_gl9755_set_clock,
1048 	.enable_dma		= sdhci_pci_enable_dma,
1049 	.set_bus_width		= sdhci_set_bus_width,
1050 	.reset			= sdhci_reset,
1051 	.set_uhs_signaling	= sdhci_set_uhs_signaling,
1052 	.voltage_switch		= sdhci_gli_voltage_switch,
1053 };
1054 
1055 const struct sdhci_pci_fixes sdhci_gl9755 = {
1056 	.quirks		= SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
1057 	.quirks2	= SDHCI_QUIRK2_BROKEN_DDR50,
1058 	.probe_slot	= gli_probe_slot_gl9755,
1059 	.ops            = &sdhci_gl9755_ops,
1060 #ifdef CONFIG_PM_SLEEP
1061 	.resume         = sdhci_pci_gli_resume,
1062 #endif
1063 };
1064 
1065 static const struct sdhci_ops sdhci_gl9750_ops = {
1066 	.read_w			= sdhci_gli_readw,
1067 	.read_b			= sdhci_gli_readb,
1068 	.read_l                 = sdhci_gl9750_readl,
1069 	.set_clock		= sdhci_gl9750_set_clock,
1070 	.enable_dma		= sdhci_pci_enable_dma,
1071 	.set_bus_width		= sdhci_set_bus_width,
1072 	.reset			= sdhci_gl9750_reset,
1073 	.set_uhs_signaling	= sdhci_set_uhs_signaling,
1074 	.voltage_switch		= sdhci_gli_voltage_switch,
1075 	.platform_execute_tuning = gl9750_execute_tuning,
1076 };
1077 
1078 const struct sdhci_pci_fixes sdhci_gl9750 = {
1079 	.quirks		= SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
1080 	.quirks2	= SDHCI_QUIRK2_BROKEN_DDR50,
1081 	.probe_slot	= gli_probe_slot_gl9750,
1082 	.ops            = &sdhci_gl9750_ops,
1083 #ifdef CONFIG_PM_SLEEP
1084 	.resume         = sdhci_pci_gli_resume,
1085 #endif
1086 };
1087 
1088 static const struct sdhci_ops sdhci_gl9763e_ops = {
1089 	.set_clock		= sdhci_set_clock,
1090 	.enable_dma		= sdhci_pci_enable_dma,
1091 	.set_bus_width		= sdhci_set_bus_width,
1092 	.reset			= sdhci_gl9763e_reset,
1093 	.set_uhs_signaling	= sdhci_set_gl9763e_signaling,
1094 	.voltage_switch		= sdhci_gli_voltage_switch,
1095 	.irq                    = sdhci_gl9763e_cqhci_irq,
1096 };
1097 
1098 const struct sdhci_pci_fixes sdhci_gl9763e = {
1099 	.quirks		= SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
1100 	.probe_slot	= gli_probe_slot_gl9763e,
1101 	.ops            = &sdhci_gl9763e_ops,
1102 #ifdef CONFIG_PM_SLEEP
1103 	.resume		= sdhci_cqhci_gli_resume,
1104 	.suspend	= sdhci_cqhci_gli_suspend,
1105 #endif
1106 #ifdef CONFIG_PM
1107 	.runtime_suspend = gl9763e_runtime_suspend,
1108 	.runtime_resume  = gl9763e_runtime_resume,
1109 	.allow_runtime_pm = true,
1110 #endif
1111 	.add_host       = gl9763e_add_host,
1112 };
1113