xref: /openbmc/linux/drivers/media/i2c/imx412.c (revision aaeb31c0)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Sony imx412 Camera Sensor Driver
4  *
5  * Copyright (C) 2021 Intel Corporation
6  */
7 #include <asm/unaligned.h>
8 
9 #include <linux/clk.h>
10 #include <linux/delay.h>
11 #include <linux/i2c.h>
12 #include <linux/module.h>
13 #include <linux/pm_runtime.h>
14 #include <linux/regulator/consumer.h>
15 
16 #include <media/v4l2-ctrls.h>
17 #include <media/v4l2-fwnode.h>
18 #include <media/v4l2-subdev.h>
19 
20 /* Streaming Mode */
21 #define IMX412_REG_MODE_SELECT	0x0100
22 #define IMX412_MODE_STANDBY	0x00
23 #define IMX412_MODE_STREAMING	0x01
24 
25 /* Lines per frame */
26 #define IMX412_REG_LPFR		0x0340
27 
28 /* Chip ID */
29 #define IMX412_REG_ID		0x0016
30 #define IMX412_ID		0x577
31 
32 /* Exposure control */
33 #define IMX412_REG_EXPOSURE_CIT	0x0202
34 #define IMX412_EXPOSURE_MIN	8
35 #define IMX412_EXPOSURE_OFFSET	22
36 #define IMX412_EXPOSURE_STEP	1
37 #define IMX412_EXPOSURE_DEFAULT	0x0648
38 
39 /* Analog gain control */
40 #define IMX412_REG_AGAIN	0x0204
41 #define IMX412_AGAIN_MIN	0
42 #define IMX412_AGAIN_MAX	978
43 #define IMX412_AGAIN_STEP	1
44 #define IMX412_AGAIN_DEFAULT	0
45 
46 /* Group hold register */
47 #define IMX412_REG_HOLD		0x0104
48 
49 /* Input clock rate */
50 #define IMX412_INCLK_RATE	24000000
51 
52 /* CSI2 HW configuration */
53 #define IMX412_LINK_FREQ	600000000
54 #define IMX412_NUM_DATA_LANES	4
55 
56 #define IMX412_REG_MIN		0x00
57 #define IMX412_REG_MAX		0xffff
58 
59 /**
60  * struct imx412_reg - imx412 sensor register
61  * @address: Register address
62  * @val: Register value
63  */
64 struct imx412_reg {
65 	u16 address;
66 	u8 val;
67 };
68 
69 /**
70  * struct imx412_reg_list - imx412 sensor register list
71  * @num_of_regs: Number of registers in the list
72  * @regs: Pointer to register list
73  */
74 struct imx412_reg_list {
75 	u32 num_of_regs;
76 	const struct imx412_reg *regs;
77 };
78 
79 /**
80  * struct imx412_mode - imx412 sensor mode structure
81  * @width: Frame width
82  * @height: Frame height
83  * @code: Format code
84  * @hblank: Horizontal blanking in lines
85  * @vblank: Vertical blanking in lines
86  * @vblank_min: Minimum vertical blanking in lines
87  * @vblank_max: Maximum vertical blanking in lines
88  * @pclk: Sensor pixel clock
89  * @link_freq_idx: Link frequency index
90  * @reg_list: Register list for sensor mode
91  */
92 struct imx412_mode {
93 	u32 width;
94 	u32 height;
95 	u32 code;
96 	u32 hblank;
97 	u32 vblank;
98 	u32 vblank_min;
99 	u32 vblank_max;
100 	u64 pclk;
101 	u32 link_freq_idx;
102 	struct imx412_reg_list reg_list;
103 };
104 
105 static const char * const imx412_supply_names[] = {
106 	"dovdd",	/* Digital I/O power */
107 	"avdd",		/* Analog power */
108 	"dvdd",		/* Digital core power */
109 };
110 
111 /**
112  * struct imx412 - imx412 sensor device structure
113  * @dev: Pointer to generic device
114  * @client: Pointer to i2c client
115  * @sd: V4L2 sub-device
116  * @pad: Media pad. Only one pad supported
117  * @reset_gpio: Sensor reset gpio
118  * @inclk: Sensor input clock
119  * @supplies: Regulator supplies
120  * @ctrl_handler: V4L2 control handler
121  * @link_freq_ctrl: Pointer to link frequency control
122  * @pclk_ctrl: Pointer to pixel clock control
123  * @hblank_ctrl: Pointer to horizontal blanking control
124  * @vblank_ctrl: Pointer to vertical blanking control
125  * @exp_ctrl: Pointer to exposure control
126  * @again_ctrl: Pointer to analog gain control
127  * @vblank: Vertical blanking in lines
128  * @cur_mode: Pointer to current selected sensor mode
129  * @mutex: Mutex for serializing sensor controls
130  * @streaming: Flag indicating streaming state
131  */
132 struct imx412 {
133 	struct device *dev;
134 	struct i2c_client *client;
135 	struct v4l2_subdev sd;
136 	struct media_pad pad;
137 	struct gpio_desc *reset_gpio;
138 	struct clk *inclk;
139 	struct regulator_bulk_data supplies[ARRAY_SIZE(imx412_supply_names)];
140 	struct v4l2_ctrl_handler ctrl_handler;
141 	struct v4l2_ctrl *link_freq_ctrl;
142 	struct v4l2_ctrl *pclk_ctrl;
143 	struct v4l2_ctrl *hblank_ctrl;
144 	struct v4l2_ctrl *vblank_ctrl;
145 	struct {
146 		struct v4l2_ctrl *exp_ctrl;
147 		struct v4l2_ctrl *again_ctrl;
148 	};
149 	u32 vblank;
150 	const struct imx412_mode *cur_mode;
151 	struct mutex mutex;
152 	bool streaming;
153 };
154 
155 static const s64 link_freq[] = {
156 	IMX412_LINK_FREQ,
157 };
158 
159 /* Sensor mode registers */
160 static const struct imx412_reg mode_4056x3040_regs[] = {
161 	{0x0136, 0x18},
162 	{0x0137, 0x00},
163 	{0x3c7e, 0x08},
164 	{0x3c7f, 0x02},
165 	{0x38a8, 0x1f},
166 	{0x38a9, 0xff},
167 	{0x38aa, 0x1f},
168 	{0x38ab, 0xff},
169 	{0x55d4, 0x00},
170 	{0x55d5, 0x00},
171 	{0x55d6, 0x07},
172 	{0x55d7, 0xff},
173 	{0x55e8, 0x07},
174 	{0x55e9, 0xff},
175 	{0x55ea, 0x00},
176 	{0x55eb, 0x00},
177 	{0x575c, 0x07},
178 	{0x575d, 0xff},
179 	{0x575e, 0x00},
180 	{0x575f, 0x00},
181 	{0x5764, 0x00},
182 	{0x5765, 0x00},
183 	{0x5766, 0x07},
184 	{0x5767, 0xff},
185 	{0x5974, 0x04},
186 	{0x5975, 0x01},
187 	{0x5f10, 0x09},
188 	{0x5f11, 0x92},
189 	{0x5f12, 0x32},
190 	{0x5f13, 0x72},
191 	{0x5f14, 0x16},
192 	{0x5f15, 0xba},
193 	{0x5f17, 0x13},
194 	{0x5f18, 0x24},
195 	{0x5f19, 0x60},
196 	{0x5f1a, 0xe3},
197 	{0x5f1b, 0xad},
198 	{0x5f1c, 0x74},
199 	{0x5f2d, 0x25},
200 	{0x5f5c, 0xd0},
201 	{0x6a22, 0x00},
202 	{0x6a23, 0x1d},
203 	{0x7ba8, 0x00},
204 	{0x7ba9, 0x00},
205 	{0x886b, 0x00},
206 	{0x9002, 0x0a},
207 	{0x9004, 0x1a},
208 	{0x9214, 0x93},
209 	{0x9215, 0x69},
210 	{0x9216, 0x93},
211 	{0x9217, 0x6b},
212 	{0x9218, 0x93},
213 	{0x9219, 0x6d},
214 	{0x921a, 0x57},
215 	{0x921b, 0x58},
216 	{0x921c, 0x57},
217 	{0x921d, 0x59},
218 	{0x921e, 0x57},
219 	{0x921f, 0x5a},
220 	{0x9220, 0x57},
221 	{0x9221, 0x5b},
222 	{0x9222, 0x93},
223 	{0x9223, 0x02},
224 	{0x9224, 0x93},
225 	{0x9225, 0x03},
226 	{0x9226, 0x93},
227 	{0x9227, 0x04},
228 	{0x9228, 0x93},
229 	{0x9229, 0x05},
230 	{0x922a, 0x98},
231 	{0x922b, 0x21},
232 	{0x922c, 0xb2},
233 	{0x922d, 0xdb},
234 	{0x922e, 0xb2},
235 	{0x922f, 0xdc},
236 	{0x9230, 0xb2},
237 	{0x9231, 0xdd},
238 	{0x9232, 0xe2},
239 	{0x9233, 0xe1},
240 	{0x9234, 0xb2},
241 	{0x9235, 0xe2},
242 	{0x9236, 0xb2},
243 	{0x9237, 0xe3},
244 	{0x9238, 0xb7},
245 	{0x9239, 0xb9},
246 	{0x923a, 0xb7},
247 	{0x923b, 0xbb},
248 	{0x923c, 0xb7},
249 	{0x923d, 0xbc},
250 	{0x923e, 0xb7},
251 	{0x923f, 0xc5},
252 	{0x9240, 0xb7},
253 	{0x9241, 0xc7},
254 	{0x9242, 0xb7},
255 	{0x9243, 0xc9},
256 	{0x9244, 0x98},
257 	{0x9245, 0x56},
258 	{0x9246, 0x98},
259 	{0x9247, 0x55},
260 	{0x9380, 0x00},
261 	{0x9381, 0x62},
262 	{0x9382, 0x00},
263 	{0x9383, 0x56},
264 	{0x9384, 0x00},
265 	{0x9385, 0x52},
266 	{0x9388, 0x00},
267 	{0x9389, 0x55},
268 	{0x938a, 0x00},
269 	{0x938b, 0x55},
270 	{0x938c, 0x00},
271 	{0x938d, 0x41},
272 	{0x5078, 0x01},
273 	{0x0112, 0x0a},
274 	{0x0113, 0x0a},
275 	{0x0114, 0x03},
276 	{0x0342, 0x11},
277 	{0x0343, 0xa0},
278 	{0x0340, 0x0d},
279 	{0x0341, 0xda},
280 	{0x3210, 0x00},
281 	{0x0344, 0x00},
282 	{0x0345, 0x00},
283 	{0x0346, 0x00},
284 	{0x0347, 0x00},
285 	{0x0348, 0x0f},
286 	{0x0349, 0xd7},
287 	{0x034a, 0x0b},
288 	{0x034b, 0xdf},
289 	{0x00e3, 0x00},
290 	{0x00e4, 0x00},
291 	{0x00e5, 0x01},
292 	{0x00fc, 0x0a},
293 	{0x00fd, 0x0a},
294 	{0x00fe, 0x0a},
295 	{0x00ff, 0x0a},
296 	{0xe013, 0x00},
297 	{0x0220, 0x00},
298 	{0x0221, 0x11},
299 	{0x0381, 0x01},
300 	{0x0383, 0x01},
301 	{0x0385, 0x01},
302 	{0x0387, 0x01},
303 	{0x0900, 0x00},
304 	{0x0901, 0x11},
305 	{0x0902, 0x00},
306 	{0x3140, 0x02},
307 	{0x3241, 0x11},
308 	{0x3250, 0x03},
309 	{0x3e10, 0x00},
310 	{0x3e11, 0x00},
311 	{0x3f0d, 0x00},
312 	{0x3f42, 0x00},
313 	{0x3f43, 0x00},
314 	{0x0401, 0x00},
315 	{0x0404, 0x00},
316 	{0x0405, 0x10},
317 	{0x0408, 0x00},
318 	{0x0409, 0x00},
319 	{0x040a, 0x00},
320 	{0x040b, 0x00},
321 	{0x040c, 0x0f},
322 	{0x040d, 0xd8},
323 	{0x040e, 0x0b},
324 	{0x040f, 0xe0},
325 	{0x034c, 0x0f},
326 	{0x034d, 0xd8},
327 	{0x034e, 0x0b},
328 	{0x034f, 0xe0},
329 	{0x0301, 0x05},
330 	{0x0303, 0x02},
331 	{0x0305, 0x04},
332 	{0x0306, 0x00},
333 	{0x0307, 0xc8},
334 	{0x0309, 0x0a},
335 	{0x030b, 0x01},
336 	{0x030d, 0x02},
337 	{0x030e, 0x01},
338 	{0x030f, 0x5e},
339 	{0x0310, 0x00},
340 	{0x0820, 0x12},
341 	{0x0821, 0xc0},
342 	{0x0822, 0x00},
343 	{0x0823, 0x00},
344 	{0x3e20, 0x01},
345 	{0x3e37, 0x00},
346 	{0x3f50, 0x00},
347 	{0x3f56, 0x00},
348 	{0x3f57, 0xe2},
349 	{0x3c0a, 0x5a},
350 	{0x3c0b, 0x55},
351 	{0x3c0c, 0x28},
352 	{0x3c0d, 0x07},
353 	{0x3c0e, 0xff},
354 	{0x3c0f, 0x00},
355 	{0x3c10, 0x00},
356 	{0x3c11, 0x02},
357 	{0x3c12, 0x00},
358 	{0x3c13, 0x03},
359 	{0x3c14, 0x00},
360 	{0x3c15, 0x00},
361 	{0x3c16, 0x0c},
362 	{0x3c17, 0x0c},
363 	{0x3c18, 0x0c},
364 	{0x3c19, 0x0a},
365 	{0x3c1a, 0x0a},
366 	{0x3c1b, 0x0a},
367 	{0x3c1c, 0x00},
368 	{0x3c1d, 0x00},
369 	{0x3c1e, 0x00},
370 	{0x3c1f, 0x00},
371 	{0x3c20, 0x00},
372 	{0x3c21, 0x00},
373 	{0x3c22, 0x3f},
374 	{0x3c23, 0x0a},
375 	{0x3e35, 0x01},
376 	{0x3f4a, 0x03},
377 	{0x3f4b, 0xbf},
378 	{0x3f26, 0x00},
379 	{0x0202, 0x0d},
380 	{0x0203, 0xc4},
381 	{0x0204, 0x00},
382 	{0x0205, 0x00},
383 	{0x020e, 0x01},
384 	{0x020f, 0x00},
385 	{0x0210, 0x01},
386 	{0x0211, 0x00},
387 	{0x0212, 0x01},
388 	{0x0213, 0x00},
389 	{0x0214, 0x01},
390 	{0x0215, 0x00},
391 	{0xbcf1, 0x00},
392 };
393 
394 /* Supported sensor mode configurations */
395 static const struct imx412_mode supported_mode = {
396 	.width = 4056,
397 	.height = 3040,
398 	.hblank = 456,
399 	.vblank = 506,
400 	.vblank_min = 506,
401 	.vblank_max = 32420,
402 	.pclk = 480000000,
403 	.link_freq_idx = 0,
404 	.code = MEDIA_BUS_FMT_SRGGB10_1X10,
405 	.reg_list = {
406 		.num_of_regs = ARRAY_SIZE(mode_4056x3040_regs),
407 		.regs = mode_4056x3040_regs,
408 	},
409 };
410 
411 /**
412  * to_imx412() - imx412 V4L2 sub-device to imx412 device.
413  * @subdev: pointer to imx412 V4L2 sub-device
414  *
415  * Return: pointer to imx412 device
416  */
to_imx412(struct v4l2_subdev * subdev)417 static inline struct imx412 *to_imx412(struct v4l2_subdev *subdev)
418 {
419 	return container_of(subdev, struct imx412, sd);
420 }
421 
422 /**
423  * imx412_read_reg() - Read registers.
424  * @imx412: pointer to imx412 device
425  * @reg: register address
426  * @len: length of bytes to read. Max supported bytes is 4
427  * @val: pointer to register value to be filled.
428  *
429  * Return: 0 if successful, error code otherwise.
430  */
imx412_read_reg(struct imx412 * imx412,u16 reg,u32 len,u32 * val)431 static int imx412_read_reg(struct imx412 *imx412, u16 reg, u32 len, u32 *val)
432 {
433 	struct i2c_client *client = v4l2_get_subdevdata(&imx412->sd);
434 	struct i2c_msg msgs[2] = {0};
435 	u8 addr_buf[2] = {0};
436 	u8 data_buf[4] = {0};
437 	int ret;
438 
439 	if (WARN_ON(len > 4))
440 		return -EINVAL;
441 
442 	put_unaligned_be16(reg, addr_buf);
443 
444 	/* Write register address */
445 	msgs[0].addr = client->addr;
446 	msgs[0].flags = 0;
447 	msgs[0].len = ARRAY_SIZE(addr_buf);
448 	msgs[0].buf = addr_buf;
449 
450 	/* Read data from register */
451 	msgs[1].addr = client->addr;
452 	msgs[1].flags = I2C_M_RD;
453 	msgs[1].len = len;
454 	msgs[1].buf = &data_buf[4 - len];
455 
456 	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
457 	if (ret != ARRAY_SIZE(msgs))
458 		return -EIO;
459 
460 	*val = get_unaligned_be32(data_buf);
461 
462 	return 0;
463 }
464 
465 /**
466  * imx412_write_reg() - Write register
467  * @imx412: pointer to imx412 device
468  * @reg: register address
469  * @len: length of bytes. Max supported bytes is 4
470  * @val: register value
471  *
472  * Return: 0 if successful, error code otherwise.
473  */
imx412_write_reg(struct imx412 * imx412,u16 reg,u32 len,u32 val)474 static int imx412_write_reg(struct imx412 *imx412, u16 reg, u32 len, u32 val)
475 {
476 	struct i2c_client *client = v4l2_get_subdevdata(&imx412->sd);
477 	u8 buf[6] = {0};
478 
479 	if (WARN_ON(len > 4))
480 		return -EINVAL;
481 
482 	put_unaligned_be16(reg, buf);
483 	put_unaligned_be32(val << (8 * (4 - len)), buf + 2);
484 	if (i2c_master_send(client, buf, len + 2) != len + 2)
485 		return -EIO;
486 
487 	return 0;
488 }
489 
490 /**
491  * imx412_write_regs() - Write a list of registers
492  * @imx412: pointer to imx412 device
493  * @regs: list of registers to be written
494  * @len: length of registers array
495  *
496  * Return: 0 if successful, error code otherwise.
497  */
imx412_write_regs(struct imx412 * imx412,const struct imx412_reg * regs,u32 len)498 static int imx412_write_regs(struct imx412 *imx412,
499 			     const struct imx412_reg *regs, u32 len)
500 {
501 	unsigned int i;
502 	int ret;
503 
504 	for (i = 0; i < len; i++) {
505 		ret = imx412_write_reg(imx412, regs[i].address, 1, regs[i].val);
506 		if (ret)
507 			return ret;
508 	}
509 
510 	return 0;
511 }
512 
513 /**
514  * imx412_update_controls() - Update control ranges based on streaming mode
515  * @imx412: pointer to imx412 device
516  * @mode: pointer to imx412_mode sensor mode
517  *
518  * Return: 0 if successful, error code otherwise.
519  */
imx412_update_controls(struct imx412 * imx412,const struct imx412_mode * mode)520 static int imx412_update_controls(struct imx412 *imx412,
521 				  const struct imx412_mode *mode)
522 {
523 	int ret;
524 
525 	ret = __v4l2_ctrl_s_ctrl(imx412->link_freq_ctrl, mode->link_freq_idx);
526 	if (ret)
527 		return ret;
528 
529 	ret = __v4l2_ctrl_s_ctrl(imx412->hblank_ctrl, mode->hblank);
530 	if (ret)
531 		return ret;
532 
533 	return __v4l2_ctrl_modify_range(imx412->vblank_ctrl, mode->vblank_min,
534 					mode->vblank_max, 1, mode->vblank);
535 }
536 
537 /**
538  * imx412_update_exp_gain() - Set updated exposure and gain
539  * @imx412: pointer to imx412 device
540  * @exposure: updated exposure value
541  * @gain: updated analog gain value
542  *
543  * Return: 0 if successful, error code otherwise.
544  */
imx412_update_exp_gain(struct imx412 * imx412,u32 exposure,u32 gain)545 static int imx412_update_exp_gain(struct imx412 *imx412, u32 exposure, u32 gain)
546 {
547 	u32 lpfr, shutter;
548 	int ret;
549 
550 	lpfr = imx412->vblank + imx412->cur_mode->height;
551 	shutter = lpfr - exposure;
552 
553 	dev_dbg(imx412->dev, "Set exp %u, analog gain %u, shutter %u, lpfr %u",
554 		exposure, gain, shutter, lpfr);
555 
556 	ret = imx412_write_reg(imx412, IMX412_REG_HOLD, 1, 1);
557 	if (ret)
558 		return ret;
559 
560 	ret = imx412_write_reg(imx412, IMX412_REG_LPFR, 2, lpfr);
561 	if (ret)
562 		goto error_release_group_hold;
563 
564 	ret = imx412_write_reg(imx412, IMX412_REG_EXPOSURE_CIT, 2, shutter);
565 	if (ret)
566 		goto error_release_group_hold;
567 
568 	ret = imx412_write_reg(imx412, IMX412_REG_AGAIN, 2, gain);
569 
570 error_release_group_hold:
571 	imx412_write_reg(imx412, IMX412_REG_HOLD, 1, 0);
572 
573 	return ret;
574 }
575 
576 /**
577  * imx412_set_ctrl() - Set subdevice control
578  * @ctrl: pointer to v4l2_ctrl structure
579  *
580  * Supported controls:
581  * - V4L2_CID_VBLANK
582  * - cluster controls:
583  *   - V4L2_CID_ANALOGUE_GAIN
584  *   - V4L2_CID_EXPOSURE
585  *
586  * Return: 0 if successful, error code otherwise.
587  */
imx412_set_ctrl(struct v4l2_ctrl * ctrl)588 static int imx412_set_ctrl(struct v4l2_ctrl *ctrl)
589 {
590 	struct imx412 *imx412 =
591 		container_of(ctrl->handler, struct imx412, ctrl_handler);
592 	u32 analog_gain;
593 	u32 exposure;
594 	int ret;
595 
596 	switch (ctrl->id) {
597 	case V4L2_CID_VBLANK:
598 		imx412->vblank = imx412->vblank_ctrl->val;
599 
600 		dev_dbg(imx412->dev, "Received vblank %u, new lpfr %u",
601 			imx412->vblank,
602 			imx412->vblank + imx412->cur_mode->height);
603 
604 		ret = __v4l2_ctrl_modify_range(imx412->exp_ctrl,
605 					       IMX412_EXPOSURE_MIN,
606 					       imx412->vblank +
607 					       imx412->cur_mode->height -
608 					       IMX412_EXPOSURE_OFFSET,
609 					       1, IMX412_EXPOSURE_DEFAULT);
610 		break;
611 	case V4L2_CID_EXPOSURE:
612 		/* Set controls only if sensor is in power on state */
613 		if (!pm_runtime_get_if_in_use(imx412->dev))
614 			return 0;
615 
616 		exposure = ctrl->val;
617 		analog_gain = imx412->again_ctrl->val;
618 
619 		dev_dbg(imx412->dev, "Received exp %u, analog gain %u",
620 			exposure, analog_gain);
621 
622 		ret = imx412_update_exp_gain(imx412, exposure, analog_gain);
623 
624 		pm_runtime_put(imx412->dev);
625 
626 		break;
627 	default:
628 		dev_err(imx412->dev, "Invalid control %d", ctrl->id);
629 		ret = -EINVAL;
630 	}
631 
632 	return ret;
633 }
634 
635 /* V4l2 subdevice control ops*/
636 static const struct v4l2_ctrl_ops imx412_ctrl_ops = {
637 	.s_ctrl = imx412_set_ctrl,
638 };
639 
640 /**
641  * imx412_enum_mbus_code() - Enumerate V4L2 sub-device mbus codes
642  * @sd: pointer to imx412 V4L2 sub-device structure
643  * @sd_state: V4L2 sub-device configuration
644  * @code: V4L2 sub-device code enumeration need to be filled
645  *
646  * Return: 0 if successful, error code otherwise.
647  */
imx412_enum_mbus_code(struct v4l2_subdev * sd,struct v4l2_subdev_state * sd_state,struct v4l2_subdev_mbus_code_enum * code)648 static int imx412_enum_mbus_code(struct v4l2_subdev *sd,
649 				 struct v4l2_subdev_state *sd_state,
650 				 struct v4l2_subdev_mbus_code_enum *code)
651 {
652 	if (code->index > 0)
653 		return -EINVAL;
654 
655 	code->code = supported_mode.code;
656 
657 	return 0;
658 }
659 
660 /**
661  * imx412_enum_frame_size() - Enumerate V4L2 sub-device frame sizes
662  * @sd: pointer to imx412 V4L2 sub-device structure
663  * @sd_state: V4L2 sub-device configuration
664  * @fsize: V4L2 sub-device size enumeration need to be filled
665  *
666  * Return: 0 if successful, error code otherwise.
667  */
imx412_enum_frame_size(struct v4l2_subdev * sd,struct v4l2_subdev_state * sd_state,struct v4l2_subdev_frame_size_enum * fsize)668 static int imx412_enum_frame_size(struct v4l2_subdev *sd,
669 				  struct v4l2_subdev_state *sd_state,
670 				  struct v4l2_subdev_frame_size_enum *fsize)
671 {
672 	if (fsize->index > 0)
673 		return -EINVAL;
674 
675 	if (fsize->code != supported_mode.code)
676 		return -EINVAL;
677 
678 	fsize->min_width = supported_mode.width;
679 	fsize->max_width = fsize->min_width;
680 	fsize->min_height = supported_mode.height;
681 	fsize->max_height = fsize->min_height;
682 
683 	return 0;
684 }
685 
686 /**
687  * imx412_fill_pad_format() - Fill subdevice pad format
688  *                            from selected sensor mode
689  * @imx412: pointer to imx412 device
690  * @mode: pointer to imx412_mode sensor mode
691  * @fmt: V4L2 sub-device format need to be filled
692  */
imx412_fill_pad_format(struct imx412 * imx412,const struct imx412_mode * mode,struct v4l2_subdev_format * fmt)693 static void imx412_fill_pad_format(struct imx412 *imx412,
694 				   const struct imx412_mode *mode,
695 				   struct v4l2_subdev_format *fmt)
696 {
697 	fmt->format.width = mode->width;
698 	fmt->format.height = mode->height;
699 	fmt->format.code = mode->code;
700 	fmt->format.field = V4L2_FIELD_NONE;
701 	fmt->format.colorspace = V4L2_COLORSPACE_RAW;
702 	fmt->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
703 	fmt->format.quantization = V4L2_QUANTIZATION_DEFAULT;
704 	fmt->format.xfer_func = V4L2_XFER_FUNC_NONE;
705 }
706 
707 /**
708  * imx412_get_pad_format() - Get subdevice pad format
709  * @sd: pointer to imx412 V4L2 sub-device structure
710  * @sd_state: V4L2 sub-device configuration
711  * @fmt: V4L2 sub-device format need to be set
712  *
713  * Return: 0 if successful, error code otherwise.
714  */
imx412_get_pad_format(struct v4l2_subdev * sd,struct v4l2_subdev_state * sd_state,struct v4l2_subdev_format * fmt)715 static int imx412_get_pad_format(struct v4l2_subdev *sd,
716 				 struct v4l2_subdev_state *sd_state,
717 				 struct v4l2_subdev_format *fmt)
718 {
719 	struct imx412 *imx412 = to_imx412(sd);
720 
721 	mutex_lock(&imx412->mutex);
722 
723 	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
724 		struct v4l2_mbus_framefmt *framefmt;
725 
726 		framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad);
727 		fmt->format = *framefmt;
728 	} else {
729 		imx412_fill_pad_format(imx412, imx412->cur_mode, fmt);
730 	}
731 
732 	mutex_unlock(&imx412->mutex);
733 
734 	return 0;
735 }
736 
737 /**
738  * imx412_set_pad_format() - Set subdevice pad format
739  * @sd: pointer to imx412 V4L2 sub-device structure
740  * @sd_state: V4L2 sub-device configuration
741  * @fmt: V4L2 sub-device format need to be set
742  *
743  * Return: 0 if successful, error code otherwise.
744  */
imx412_set_pad_format(struct v4l2_subdev * sd,struct v4l2_subdev_state * sd_state,struct v4l2_subdev_format * fmt)745 static int imx412_set_pad_format(struct v4l2_subdev *sd,
746 				 struct v4l2_subdev_state *sd_state,
747 				 struct v4l2_subdev_format *fmt)
748 {
749 	struct imx412 *imx412 = to_imx412(sd);
750 	const struct imx412_mode *mode;
751 	int ret = 0;
752 
753 	mutex_lock(&imx412->mutex);
754 
755 	mode = &supported_mode;
756 	imx412_fill_pad_format(imx412, mode, fmt);
757 
758 	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
759 		struct v4l2_mbus_framefmt *framefmt;
760 
761 		framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad);
762 		*framefmt = fmt->format;
763 	} else {
764 		ret = imx412_update_controls(imx412, mode);
765 		if (!ret)
766 			imx412->cur_mode = mode;
767 	}
768 
769 	mutex_unlock(&imx412->mutex);
770 
771 	return ret;
772 }
773 
774 /**
775  * imx412_init_pad_cfg() - Initialize sub-device pad configuration
776  * @sd: pointer to imx412 V4L2 sub-device structure
777  * @sd_state: V4L2 sub-device configuration
778  *
779  * Return: 0 if successful, error code otherwise.
780  */
imx412_init_pad_cfg(struct v4l2_subdev * sd,struct v4l2_subdev_state * sd_state)781 static int imx412_init_pad_cfg(struct v4l2_subdev *sd,
782 			       struct v4l2_subdev_state *sd_state)
783 {
784 	struct imx412 *imx412 = to_imx412(sd);
785 	struct v4l2_subdev_format fmt = { 0 };
786 
787 	fmt.which = sd_state ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
788 	imx412_fill_pad_format(imx412, &supported_mode, &fmt);
789 
790 	return imx412_set_pad_format(sd, sd_state, &fmt);
791 }
792 
793 /**
794  * imx412_start_streaming() - Start sensor stream
795  * @imx412: pointer to imx412 device
796  *
797  * Return: 0 if successful, error code otherwise.
798  */
imx412_start_streaming(struct imx412 * imx412)799 static int imx412_start_streaming(struct imx412 *imx412)
800 {
801 	const struct imx412_reg_list *reg_list;
802 	int ret;
803 
804 	/* Write sensor mode registers */
805 	reg_list = &imx412->cur_mode->reg_list;
806 	ret = imx412_write_regs(imx412, reg_list->regs,
807 				reg_list->num_of_regs);
808 	if (ret) {
809 		dev_err(imx412->dev, "fail to write initial registers");
810 		return ret;
811 	}
812 
813 	/* Setup handler will write actual exposure and gain */
814 	ret =  __v4l2_ctrl_handler_setup(imx412->sd.ctrl_handler);
815 	if (ret) {
816 		dev_err(imx412->dev, "fail to setup handler");
817 		return ret;
818 	}
819 
820 	/* Delay is required before streaming*/
821 	usleep_range(7400, 8000);
822 
823 	/* Start streaming */
824 	ret = imx412_write_reg(imx412, IMX412_REG_MODE_SELECT,
825 			       1, IMX412_MODE_STREAMING);
826 	if (ret) {
827 		dev_err(imx412->dev, "fail to start streaming");
828 		return ret;
829 	}
830 
831 	return 0;
832 }
833 
834 /**
835  * imx412_stop_streaming() - Stop sensor stream
836  * @imx412: pointer to imx412 device
837  *
838  * Return: 0 if successful, error code otherwise.
839  */
imx412_stop_streaming(struct imx412 * imx412)840 static int imx412_stop_streaming(struct imx412 *imx412)
841 {
842 	return imx412_write_reg(imx412, IMX412_REG_MODE_SELECT,
843 				1, IMX412_MODE_STANDBY);
844 }
845 
846 /**
847  * imx412_set_stream() - Enable sensor streaming
848  * @sd: pointer to imx412 subdevice
849  * @enable: set to enable sensor streaming
850  *
851  * Return: 0 if successful, error code otherwise.
852  */
imx412_set_stream(struct v4l2_subdev * sd,int enable)853 static int imx412_set_stream(struct v4l2_subdev *sd, int enable)
854 {
855 	struct imx412 *imx412 = to_imx412(sd);
856 	int ret;
857 
858 	mutex_lock(&imx412->mutex);
859 
860 	if (imx412->streaming == enable) {
861 		mutex_unlock(&imx412->mutex);
862 		return 0;
863 	}
864 
865 	if (enable) {
866 		ret = pm_runtime_resume_and_get(imx412->dev);
867 		if (ret)
868 			goto error_unlock;
869 
870 		ret = imx412_start_streaming(imx412);
871 		if (ret)
872 			goto error_power_off;
873 	} else {
874 		imx412_stop_streaming(imx412);
875 		pm_runtime_put(imx412->dev);
876 	}
877 
878 	imx412->streaming = enable;
879 
880 	mutex_unlock(&imx412->mutex);
881 
882 	return 0;
883 
884 error_power_off:
885 	pm_runtime_put(imx412->dev);
886 error_unlock:
887 	mutex_unlock(&imx412->mutex);
888 
889 	return ret;
890 }
891 
892 /**
893  * imx412_detect() - Detect imx412 sensor
894  * @imx412: pointer to imx412 device
895  *
896  * Return: 0 if successful, -EIO if sensor id does not match
897  */
imx412_detect(struct imx412 * imx412)898 static int imx412_detect(struct imx412 *imx412)
899 {
900 	int ret;
901 	u32 val;
902 
903 	ret = imx412_read_reg(imx412, IMX412_REG_ID, 2, &val);
904 	if (ret)
905 		return ret;
906 
907 	if (val != IMX412_ID) {
908 		dev_err(imx412->dev, "chip id mismatch: %x!=%x",
909 			IMX412_ID, val);
910 		return -ENXIO;
911 	}
912 
913 	return 0;
914 }
915 
916 /**
917  * imx412_parse_hw_config() - Parse HW configuration and check if supported
918  * @imx412: pointer to imx412 device
919  *
920  * Return: 0 if successful, error code otherwise.
921  */
imx412_parse_hw_config(struct imx412 * imx412)922 static int imx412_parse_hw_config(struct imx412 *imx412)
923 {
924 	struct fwnode_handle *fwnode = dev_fwnode(imx412->dev);
925 	struct v4l2_fwnode_endpoint bus_cfg = {
926 		.bus_type = V4L2_MBUS_CSI2_DPHY
927 	};
928 	struct fwnode_handle *ep;
929 	unsigned long rate;
930 	unsigned int i;
931 	int ret;
932 
933 	if (!fwnode)
934 		return -ENXIO;
935 
936 	/* Request optional reset pin */
937 	imx412->reset_gpio = devm_gpiod_get_optional(imx412->dev, "reset",
938 						     GPIOD_OUT_LOW);
939 	if (IS_ERR(imx412->reset_gpio)) {
940 		dev_err(imx412->dev, "failed to get reset gpio %ld",
941 			PTR_ERR(imx412->reset_gpio));
942 		return PTR_ERR(imx412->reset_gpio);
943 	}
944 
945 	/* Get sensor input clock */
946 	imx412->inclk = devm_clk_get(imx412->dev, NULL);
947 	if (IS_ERR(imx412->inclk)) {
948 		dev_err(imx412->dev, "could not get inclk");
949 		return PTR_ERR(imx412->inclk);
950 	}
951 
952 	rate = clk_get_rate(imx412->inclk);
953 	if (rate != IMX412_INCLK_RATE) {
954 		dev_err(imx412->dev, "inclk frequency mismatch");
955 		return -EINVAL;
956 	}
957 
958 	/* Get optional DT defined regulators */
959 	for (i = 0; i < ARRAY_SIZE(imx412_supply_names); i++)
960 		imx412->supplies[i].supply = imx412_supply_names[i];
961 
962 	ret = devm_regulator_bulk_get(imx412->dev,
963 				      ARRAY_SIZE(imx412_supply_names),
964 				      imx412->supplies);
965 	if (ret)
966 		return ret;
967 
968 	ep = fwnode_graph_get_next_endpoint(fwnode, NULL);
969 	if (!ep)
970 		return -ENXIO;
971 
972 	ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg);
973 	fwnode_handle_put(ep);
974 	if (ret)
975 		return ret;
976 
977 	if (bus_cfg.bus.mipi_csi2.num_data_lanes != IMX412_NUM_DATA_LANES) {
978 		dev_err(imx412->dev,
979 			"number of CSI2 data lanes %d is not supported",
980 			bus_cfg.bus.mipi_csi2.num_data_lanes);
981 		ret = -EINVAL;
982 		goto done_endpoint_free;
983 	}
984 
985 	if (!bus_cfg.nr_of_link_frequencies) {
986 		dev_err(imx412->dev, "no link frequencies defined");
987 		ret = -EINVAL;
988 		goto done_endpoint_free;
989 	}
990 
991 	for (i = 0; i < bus_cfg.nr_of_link_frequencies; i++)
992 		if (bus_cfg.link_frequencies[i] == IMX412_LINK_FREQ)
993 			goto done_endpoint_free;
994 
995 	ret = -EINVAL;
996 
997 done_endpoint_free:
998 	v4l2_fwnode_endpoint_free(&bus_cfg);
999 
1000 	return ret;
1001 }
1002 
1003 /* V4l2 subdevice ops */
1004 static const struct v4l2_subdev_video_ops imx412_video_ops = {
1005 	.s_stream = imx412_set_stream,
1006 };
1007 
1008 static const struct v4l2_subdev_pad_ops imx412_pad_ops = {
1009 	.init_cfg = imx412_init_pad_cfg,
1010 	.enum_mbus_code = imx412_enum_mbus_code,
1011 	.enum_frame_size = imx412_enum_frame_size,
1012 	.get_fmt = imx412_get_pad_format,
1013 	.set_fmt = imx412_set_pad_format,
1014 };
1015 
1016 static const struct v4l2_subdev_ops imx412_subdev_ops = {
1017 	.video = &imx412_video_ops,
1018 	.pad = &imx412_pad_ops,
1019 };
1020 
1021 /**
1022  * imx412_power_on() - Sensor power on sequence
1023  * @dev: pointer to i2c device
1024  *
1025  * Return: 0 if successful, error code otherwise.
1026  */
imx412_power_on(struct device * dev)1027 static int imx412_power_on(struct device *dev)
1028 {
1029 	struct v4l2_subdev *sd = dev_get_drvdata(dev);
1030 	struct imx412 *imx412 = to_imx412(sd);
1031 	int ret;
1032 
1033 	ret = regulator_bulk_enable(ARRAY_SIZE(imx412_supply_names),
1034 				    imx412->supplies);
1035 	if (ret < 0) {
1036 		dev_err(dev, "failed to enable regulators\n");
1037 		return ret;
1038 	}
1039 
1040 	gpiod_set_value_cansleep(imx412->reset_gpio, 0);
1041 
1042 	ret = clk_prepare_enable(imx412->inclk);
1043 	if (ret) {
1044 		dev_err(imx412->dev, "fail to enable inclk");
1045 		goto error_reset;
1046 	}
1047 
1048 	usleep_range(1000, 1200);
1049 
1050 	return 0;
1051 
1052 error_reset:
1053 	gpiod_set_value_cansleep(imx412->reset_gpio, 1);
1054 	regulator_bulk_disable(ARRAY_SIZE(imx412_supply_names),
1055 			       imx412->supplies);
1056 
1057 	return ret;
1058 }
1059 
1060 /**
1061  * imx412_power_off() - Sensor power off sequence
1062  * @dev: pointer to i2c device
1063  *
1064  * Return: 0 if successful, error code otherwise.
1065  */
imx412_power_off(struct device * dev)1066 static int imx412_power_off(struct device *dev)
1067 {
1068 	struct v4l2_subdev *sd = dev_get_drvdata(dev);
1069 	struct imx412 *imx412 = to_imx412(sd);
1070 
1071 	clk_disable_unprepare(imx412->inclk);
1072 
1073 	gpiod_set_value_cansleep(imx412->reset_gpio, 1);
1074 
1075 	regulator_bulk_disable(ARRAY_SIZE(imx412_supply_names),
1076 			       imx412->supplies);
1077 
1078 	return 0;
1079 }
1080 
1081 /**
1082  * imx412_init_controls() - Initialize sensor subdevice controls
1083  * @imx412: pointer to imx412 device
1084  *
1085  * Return: 0 if successful, error code otherwise.
1086  */
imx412_init_controls(struct imx412 * imx412)1087 static int imx412_init_controls(struct imx412 *imx412)
1088 {
1089 	struct v4l2_ctrl_handler *ctrl_hdlr = &imx412->ctrl_handler;
1090 	const struct imx412_mode *mode = imx412->cur_mode;
1091 	u32 lpfr;
1092 	int ret;
1093 
1094 	ret = v4l2_ctrl_handler_init(ctrl_hdlr, 6);
1095 	if (ret)
1096 		return ret;
1097 
1098 	/* Serialize controls with sensor device */
1099 	ctrl_hdlr->lock = &imx412->mutex;
1100 
1101 	/* Initialize exposure and gain */
1102 	lpfr = mode->vblank + mode->height;
1103 	imx412->exp_ctrl = v4l2_ctrl_new_std(ctrl_hdlr,
1104 					     &imx412_ctrl_ops,
1105 					     V4L2_CID_EXPOSURE,
1106 					     IMX412_EXPOSURE_MIN,
1107 					     lpfr - IMX412_EXPOSURE_OFFSET,
1108 					     IMX412_EXPOSURE_STEP,
1109 					     IMX412_EXPOSURE_DEFAULT);
1110 
1111 	imx412->again_ctrl = v4l2_ctrl_new_std(ctrl_hdlr,
1112 					       &imx412_ctrl_ops,
1113 					       V4L2_CID_ANALOGUE_GAIN,
1114 					       IMX412_AGAIN_MIN,
1115 					       IMX412_AGAIN_MAX,
1116 					       IMX412_AGAIN_STEP,
1117 					       IMX412_AGAIN_DEFAULT);
1118 
1119 	v4l2_ctrl_cluster(2, &imx412->exp_ctrl);
1120 
1121 	imx412->vblank_ctrl = v4l2_ctrl_new_std(ctrl_hdlr,
1122 						&imx412_ctrl_ops,
1123 						V4L2_CID_VBLANK,
1124 						mode->vblank_min,
1125 						mode->vblank_max,
1126 						1, mode->vblank);
1127 
1128 	/* Read only controls */
1129 	imx412->pclk_ctrl = v4l2_ctrl_new_std(ctrl_hdlr,
1130 					      &imx412_ctrl_ops,
1131 					      V4L2_CID_PIXEL_RATE,
1132 					      mode->pclk, mode->pclk,
1133 					      1, mode->pclk);
1134 
1135 	imx412->link_freq_ctrl = v4l2_ctrl_new_int_menu(ctrl_hdlr,
1136 							&imx412_ctrl_ops,
1137 							V4L2_CID_LINK_FREQ,
1138 							ARRAY_SIZE(link_freq) -
1139 							1,
1140 							mode->link_freq_idx,
1141 							link_freq);
1142 	if (imx412->link_freq_ctrl)
1143 		imx412->link_freq_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
1144 
1145 	imx412->hblank_ctrl = v4l2_ctrl_new_std(ctrl_hdlr,
1146 						&imx412_ctrl_ops,
1147 						V4L2_CID_HBLANK,
1148 						IMX412_REG_MIN,
1149 						IMX412_REG_MAX,
1150 						1, mode->hblank);
1151 	if (imx412->hblank_ctrl)
1152 		imx412->hblank_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
1153 
1154 	if (ctrl_hdlr->error) {
1155 		dev_err(imx412->dev, "control init failed: %d",
1156 			ctrl_hdlr->error);
1157 		v4l2_ctrl_handler_free(ctrl_hdlr);
1158 		return ctrl_hdlr->error;
1159 	}
1160 
1161 	imx412->sd.ctrl_handler = ctrl_hdlr;
1162 
1163 	return 0;
1164 }
1165 
1166 /**
1167  * imx412_probe() - I2C client device binding
1168  * @client: pointer to i2c client device
1169  *
1170  * Return: 0 if successful, error code otherwise.
1171  */
imx412_probe(struct i2c_client * client)1172 static int imx412_probe(struct i2c_client *client)
1173 {
1174 	struct imx412 *imx412;
1175 	const char *name;
1176 	int ret;
1177 
1178 	imx412 = devm_kzalloc(&client->dev, sizeof(*imx412), GFP_KERNEL);
1179 	if (!imx412)
1180 		return -ENOMEM;
1181 
1182 	imx412->dev = &client->dev;
1183 	name = device_get_match_data(&client->dev);
1184 	if (!name)
1185 		return -ENODEV;
1186 
1187 	/* Initialize subdev */
1188 	v4l2_i2c_subdev_init(&imx412->sd, client, &imx412_subdev_ops);
1189 
1190 	ret = imx412_parse_hw_config(imx412);
1191 	if (ret) {
1192 		dev_err(imx412->dev, "HW configuration is not supported");
1193 		return ret;
1194 	}
1195 
1196 	mutex_init(&imx412->mutex);
1197 
1198 	ret = imx412_power_on(imx412->dev);
1199 	if (ret) {
1200 		dev_err(imx412->dev, "failed to power-on the sensor");
1201 		goto error_mutex_destroy;
1202 	}
1203 
1204 	/* Check module identity */
1205 	ret = imx412_detect(imx412);
1206 	if (ret) {
1207 		dev_err(imx412->dev, "failed to find sensor: %d", ret);
1208 		goto error_power_off;
1209 	}
1210 
1211 	/* Set default mode to max resolution */
1212 	imx412->cur_mode = &supported_mode;
1213 	imx412->vblank = imx412->cur_mode->vblank;
1214 
1215 	ret = imx412_init_controls(imx412);
1216 	if (ret) {
1217 		dev_err(imx412->dev, "failed to init controls: %d", ret);
1218 		goto error_power_off;
1219 	}
1220 
1221 	/* Initialize subdev */
1222 	imx412->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
1223 	imx412->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
1224 
1225 	v4l2_i2c_subdev_set_name(&imx412->sd, client, name, NULL);
1226 
1227 	/* Initialize source pad */
1228 	imx412->pad.flags = MEDIA_PAD_FL_SOURCE;
1229 	ret = media_entity_pads_init(&imx412->sd.entity, 1, &imx412->pad);
1230 	if (ret) {
1231 		dev_err(imx412->dev, "failed to init entity pads: %d", ret);
1232 		goto error_handler_free;
1233 	}
1234 
1235 	ret = v4l2_async_register_subdev_sensor(&imx412->sd);
1236 	if (ret < 0) {
1237 		dev_err(imx412->dev,
1238 			"failed to register async subdev: %d", ret);
1239 		goto error_media_entity;
1240 	}
1241 
1242 	pm_runtime_set_active(imx412->dev);
1243 	pm_runtime_enable(imx412->dev);
1244 	pm_runtime_idle(imx412->dev);
1245 
1246 	return 0;
1247 
1248 error_media_entity:
1249 	media_entity_cleanup(&imx412->sd.entity);
1250 error_handler_free:
1251 	v4l2_ctrl_handler_free(imx412->sd.ctrl_handler);
1252 error_power_off:
1253 	imx412_power_off(imx412->dev);
1254 error_mutex_destroy:
1255 	mutex_destroy(&imx412->mutex);
1256 
1257 	return ret;
1258 }
1259 
1260 /**
1261  * imx412_remove() - I2C client device unbinding
1262  * @client: pointer to I2C client device
1263  *
1264  * Return: 0 if successful, error code otherwise.
1265  */
imx412_remove(struct i2c_client * client)1266 static void imx412_remove(struct i2c_client *client)
1267 {
1268 	struct v4l2_subdev *sd = i2c_get_clientdata(client);
1269 	struct imx412 *imx412 = to_imx412(sd);
1270 
1271 	v4l2_async_unregister_subdev(sd);
1272 	media_entity_cleanup(&sd->entity);
1273 	v4l2_ctrl_handler_free(sd->ctrl_handler);
1274 
1275 	pm_runtime_disable(&client->dev);
1276 	if (!pm_runtime_status_suspended(&client->dev))
1277 		imx412_power_off(&client->dev);
1278 	pm_runtime_set_suspended(&client->dev);
1279 
1280 	mutex_destroy(&imx412->mutex);
1281 }
1282 
1283 static const struct dev_pm_ops imx412_pm_ops = {
1284 	SET_RUNTIME_PM_OPS(imx412_power_off, imx412_power_on, NULL)
1285 };
1286 
1287 static const struct of_device_id imx412_of_match[] = {
1288 	{ .compatible = "sony,imx412", .data = "imx412" },
1289 	{ .compatible = "sony,imx577", .data = "imx577" },
1290 	{ }
1291 };
1292 
1293 MODULE_DEVICE_TABLE(of, imx412_of_match);
1294 
1295 static struct i2c_driver imx412_driver = {
1296 	.probe = imx412_probe,
1297 	.remove = imx412_remove,
1298 	.driver = {
1299 		.name = "imx412",
1300 		.pm = &imx412_pm_ops,
1301 		.of_match_table = imx412_of_match,
1302 	},
1303 };
1304 
1305 module_i2c_driver(imx412_driver);
1306 
1307 MODULE_DESCRIPTION("Sony imx412 sensor driver");
1308 MODULE_LICENSE("GPL");
1309