1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Driver for cypress touch screen controller
4  *
5  * Copyright (c) 2009 Aava Mobile
6  *
7  * Some cleanups by Alan Cox <alan@linux.intel.com>
8  */
9 
10 #include <linux/i2c.h>
11 #include <linux/input.h>
12 #include <linux/interrupt.h>
13 #include <linux/gpio/consumer.h>
14 #include <linux/kernel.h>
15 #include <linux/module.h>
16 #include <linux/slab.h>
17 #include <asm/byteorder.h>
18 
19 #define CY8CTMG110_DRIVER_NAME      "cy8ctmg110"
20 
21 /* Touch coordinates */
22 #define CY8CTMG110_X_MIN		0
23 #define CY8CTMG110_Y_MIN		0
24 #define CY8CTMG110_X_MAX		759
25 #define CY8CTMG110_Y_MAX		465
26 
27 
28 /* cy8ctmg110 register definitions */
29 #define CY8CTMG110_TOUCH_WAKEUP_TIME	0
30 #define CY8CTMG110_TOUCH_SLEEP_TIME	2
31 #define CY8CTMG110_TOUCH_X1		3
32 #define CY8CTMG110_TOUCH_Y1		5
33 #define CY8CTMG110_TOUCH_X2		7
34 #define CY8CTMG110_TOUCH_Y2		9
35 #define CY8CTMG110_FINGERS		11
36 #define CY8CTMG110_GESTURE		12
37 #define CY8CTMG110_REG_MAX		13
38 
39 
40 /*
41  * The touch driver structure.
42  */
43 struct cy8ctmg110 {
44 	struct input_dev *input;
45 	char phys[32];
46 	struct i2c_client *client;
47 	struct gpio_desc *reset_gpio;
48 };
49 
50 /*
51  * cy8ctmg110_power is the routine that is called when touch hardware
52  * is being powered off or on. When powering on this routine de-asserts
53  * the RESET line, when powering off reset line is asserted.
54  */
cy8ctmg110_power(struct cy8ctmg110 * ts,bool poweron)55 static void cy8ctmg110_power(struct cy8ctmg110 *ts, bool poweron)
56 {
57 	if (ts->reset_gpio)
58 		gpiod_set_value_cansleep(ts->reset_gpio, !poweron);
59 }
60 
cy8ctmg110_write_regs(struct cy8ctmg110 * tsc,unsigned char reg,unsigned char len,unsigned char * value)61 static int cy8ctmg110_write_regs(struct cy8ctmg110 *tsc, unsigned char reg,
62 		unsigned char len, unsigned char *value)
63 {
64 	struct i2c_client *client = tsc->client;
65 	int ret;
66 	unsigned char i2c_data[6];
67 
68 	BUG_ON(len > 5);
69 
70 	i2c_data[0] = reg;
71 	memcpy(i2c_data + 1, value, len);
72 
73 	ret = i2c_master_send(client, i2c_data, len + 1);
74 	if (ret != len + 1) {
75 		dev_err(&client->dev, "i2c write data cmd failed\n");
76 		return ret < 0 ? ret : -EIO;
77 	}
78 
79 	return 0;
80 }
81 
cy8ctmg110_read_regs(struct cy8ctmg110 * tsc,unsigned char * data,unsigned char len,unsigned char cmd)82 static int cy8ctmg110_read_regs(struct cy8ctmg110 *tsc,
83 		unsigned char *data, unsigned char len, unsigned char cmd)
84 {
85 	struct i2c_client *client = tsc->client;
86 	int ret;
87 	struct i2c_msg msg[2] = {
88 		/* first write slave position to i2c devices */
89 		{
90 			.addr = client->addr,
91 			.len = 1,
92 			.buf = &cmd
93 		},
94 		/* Second read data from position */
95 		{
96 			.addr = client->addr,
97 			.flags = I2C_M_RD,
98 			.len = len,
99 			.buf = data
100 		}
101 	};
102 
103 	ret = i2c_transfer(client->adapter, msg, 2);
104 	if (ret < 0)
105 		return ret;
106 
107 	return 0;
108 }
109 
cy8ctmg110_touch_pos(struct cy8ctmg110 * tsc)110 static int cy8ctmg110_touch_pos(struct cy8ctmg110 *tsc)
111 {
112 	struct input_dev *input = tsc->input;
113 	unsigned char reg_p[CY8CTMG110_REG_MAX];
114 
115 	memset(reg_p, 0, CY8CTMG110_REG_MAX);
116 
117 	/* Reading coordinates */
118 	if (cy8ctmg110_read_regs(tsc, reg_p, 9, CY8CTMG110_TOUCH_X1) != 0)
119 		return -EIO;
120 
121 	/* Number of touch */
122 	if (reg_p[8] == 0) {
123 		input_report_key(input, BTN_TOUCH, 0);
124 	} else  {
125 		input_report_key(input, BTN_TOUCH, 1);
126 		input_report_abs(input, ABS_X,
127 				 be16_to_cpup((__be16 *)(reg_p + 0)));
128 		input_report_abs(input, ABS_Y,
129 				 be16_to_cpup((__be16 *)(reg_p + 2)));
130 	}
131 
132 	input_sync(input);
133 
134 	return 0;
135 }
136 
cy8ctmg110_set_sleepmode(struct cy8ctmg110 * ts,bool sleep)137 static int cy8ctmg110_set_sleepmode(struct cy8ctmg110 *ts, bool sleep)
138 {
139 	unsigned char reg_p[3];
140 
141 	if (sleep) {
142 		reg_p[0] = 0x00;
143 		reg_p[1] = 0xff;
144 		reg_p[2] = 5;
145 	} else {
146 		reg_p[0] = 0x10;
147 		reg_p[1] = 0xff;
148 		reg_p[2] = 0;
149 	}
150 
151 	return cy8ctmg110_write_regs(ts, CY8CTMG110_TOUCH_WAKEUP_TIME, 3, reg_p);
152 }
153 
cy8ctmg110_irq_thread(int irq,void * dev_id)154 static irqreturn_t cy8ctmg110_irq_thread(int irq, void *dev_id)
155 {
156 	struct cy8ctmg110 *tsc = dev_id;
157 
158 	cy8ctmg110_touch_pos(tsc);
159 
160 	return IRQ_HANDLED;
161 }
162 
cy8ctmg110_shut_off(void * _ts)163 static void cy8ctmg110_shut_off(void *_ts)
164 {
165 	struct cy8ctmg110 *ts = _ts;
166 
167 	cy8ctmg110_set_sleepmode(ts, true);
168 	cy8ctmg110_power(ts, false);
169 }
170 
cy8ctmg110_probe(struct i2c_client * client)171 static int cy8ctmg110_probe(struct i2c_client *client)
172 {
173 	struct cy8ctmg110 *ts;
174 	struct input_dev *input_dev;
175 	int err;
176 
177 	if (!i2c_check_functionality(client->adapter,
178 					I2C_FUNC_SMBUS_READ_WORD_DATA))
179 		return -EIO;
180 
181 	ts = devm_kzalloc(&client->dev, sizeof(*ts), GFP_KERNEL);
182 	if (!ts)
183 		return -ENOMEM;
184 
185 	input_dev = devm_input_allocate_device(&client->dev);
186 	if (!input_dev)
187 		return -ENOMEM;
188 
189 	ts->client = client;
190 	ts->input = input_dev;
191 
192 	snprintf(ts->phys, sizeof(ts->phys),
193 		 "%s/input0", dev_name(&client->dev));
194 
195 	input_dev->name = CY8CTMG110_DRIVER_NAME " Touchscreen";
196 	input_dev->phys = ts->phys;
197 	input_dev->id.bustype = BUS_I2C;
198 
199 	input_set_capability(input_dev, EV_KEY, BTN_TOUCH);
200 	input_set_abs_params(input_dev, ABS_X,
201 			CY8CTMG110_X_MIN, CY8CTMG110_X_MAX, 4, 0);
202 	input_set_abs_params(input_dev, ABS_Y,
203 			CY8CTMG110_Y_MIN, CY8CTMG110_Y_MAX, 4, 0);
204 
205 	/* Request and assert reset line */
206 	ts->reset_gpio = devm_gpiod_get_optional(&client->dev, NULL,
207 						 GPIOD_OUT_HIGH);
208 	if (IS_ERR(ts->reset_gpio)) {
209 		err = PTR_ERR(ts->reset_gpio);
210 		dev_err(&client->dev,
211 			"Unable to request reset GPIO: %d\n", err);
212 		return err;
213 	}
214 
215 	cy8ctmg110_power(ts, true);
216 	cy8ctmg110_set_sleepmode(ts, false);
217 
218 	err = devm_add_action_or_reset(&client->dev, cy8ctmg110_shut_off, ts);
219 	if (err)
220 		return err;
221 
222 	err = devm_request_threaded_irq(&client->dev, client->irq,
223 					NULL, cy8ctmg110_irq_thread,
224 					IRQF_ONESHOT, "touch_reset_key", ts);
225 	if (err) {
226 		dev_err(&client->dev,
227 			"irq %d busy? error %d\n", client->irq, err);
228 		return err;
229 	}
230 
231 	err = input_register_device(input_dev);
232 	if (err)
233 		return err;
234 
235 	i2c_set_clientdata(client, ts);
236 
237 	return 0;
238 }
239 
cy8ctmg110_suspend(struct device * dev)240 static int cy8ctmg110_suspend(struct device *dev)
241 {
242 	struct i2c_client *client = to_i2c_client(dev);
243 	struct cy8ctmg110 *ts = i2c_get_clientdata(client);
244 
245 	if (!device_may_wakeup(&client->dev)) {
246 		cy8ctmg110_set_sleepmode(ts, true);
247 		cy8ctmg110_power(ts, false);
248 	}
249 
250 	return 0;
251 }
252 
cy8ctmg110_resume(struct device * dev)253 static int cy8ctmg110_resume(struct device *dev)
254 {
255 	struct i2c_client *client = to_i2c_client(dev);
256 	struct cy8ctmg110 *ts = i2c_get_clientdata(client);
257 
258 	if (!device_may_wakeup(&client->dev)) {
259 		cy8ctmg110_power(ts, true);
260 		cy8ctmg110_set_sleepmode(ts, false);
261 	}
262 
263 	return 0;
264 }
265 
266 static DEFINE_SIMPLE_DEV_PM_OPS(cy8ctmg110_pm,
267 				cy8ctmg110_suspend, cy8ctmg110_resume);
268 
269 static const struct i2c_device_id cy8ctmg110_idtable[] = {
270 	{ CY8CTMG110_DRIVER_NAME, 1 },
271 	{ }
272 };
273 
274 MODULE_DEVICE_TABLE(i2c, cy8ctmg110_idtable);
275 
276 static struct i2c_driver cy8ctmg110_driver = {
277 	.driver		= {
278 		.name	= CY8CTMG110_DRIVER_NAME,
279 		.pm	= pm_sleep_ptr(&cy8ctmg110_pm),
280 	},
281 	.id_table	= cy8ctmg110_idtable,
282 	.probe		= cy8ctmg110_probe,
283 };
284 
285 module_i2c_driver(cy8ctmg110_driver);
286 
287 MODULE_AUTHOR("Samuli Konttila <samuli.konttila@aavamobile.com>");
288 MODULE_DESCRIPTION("cy8ctmg110 TouchScreen Driver");
289 MODULE_LICENSE("GPL v2");
290