xref: /openbmc/linux/drivers/iio/proximity/srf04.c (revision e802ca75)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * SRF04: ultrasonic sensor for distance measuring by using GPIOs
4  *
5  * Copyright (c) 2017 Andreas Klinger <ak@it-klinger.de>
6  *
7  * For details about the device see:
8  * https://www.robot-electronics.co.uk/htm/srf04tech.htm
9  *
10  * the measurement cycle as timing diagram looks like:
11  *
12  *          +---+
13  * GPIO     |   |
14  * trig:  --+   +------------------------------------------------------
15  *          ^   ^
16  *          |<->|
17  *         udelay(trigger_pulse_us)
18  *
19  * ultra           +-+ +-+ +-+
20  * sonic           | | | | | |
21  * burst: ---------+ +-+ +-+ +-----------------------------------------
22  *                           .
23  * ultra                     .              +-+ +-+ +-+
24  * sonic                     .              | | | | | |
25  * echo:  ----------------------------------+ +-+ +-+ +----------------
26  *                           .                        .
27  *                           +------------------------+
28  * GPIO                      |                        |
29  * echo:  -------------------+                        +---------------
30  *                           ^                        ^
31  *                           interrupt                interrupt
32  *                           (ts_rising)              (ts_falling)
33  *                           |<---------------------->|
34  *                              pulse time measured
35  *                              --> one round trip of ultra sonic waves
36  */
37 #include <linux/err.h>
38 #include <linux/gpio/consumer.h>
39 #include <linux/kernel.h>
40 #include <linux/module.h>
41 #include <linux/of.h>
42 #include <linux/of_device.h>
43 #include <linux/platform_device.h>
44 #include <linux/property.h>
45 #include <linux/sched.h>
46 #include <linux/interrupt.h>
47 #include <linux/delay.h>
48 #include <linux/pm_runtime.h>
49 #include <linux/iio/iio.h>
50 #include <linux/iio/sysfs.h>
51 
52 struct srf04_cfg {
53 	unsigned long trigger_pulse_us;
54 };
55 
56 struct srf04_data {
57 	struct device		*dev;
58 	struct gpio_desc	*gpiod_trig;
59 	struct gpio_desc	*gpiod_echo;
60 	struct gpio_desc	*gpiod_power;
61 	struct mutex		lock;
62 	int			irqnr;
63 	ktime_t			ts_rising;
64 	ktime_t			ts_falling;
65 	struct completion	rising;
66 	struct completion	falling;
67 	const struct srf04_cfg	*cfg;
68 	int			startup_time_ms;
69 };
70 
71 static const struct srf04_cfg srf04_cfg = {
72 	.trigger_pulse_us = 10,
73 };
74 
75 static const struct srf04_cfg mb_lv_cfg = {
76 	.trigger_pulse_us = 20,
77 };
78 
79 static irqreturn_t srf04_handle_irq(int irq, void *dev_id)
80 {
81 	struct iio_dev *indio_dev = dev_id;
82 	struct srf04_data *data = iio_priv(indio_dev);
83 	ktime_t now = ktime_get();
84 
85 	if (gpiod_get_value(data->gpiod_echo)) {
86 		data->ts_rising = now;
87 		complete(&data->rising);
88 	} else {
89 		data->ts_falling = now;
90 		complete(&data->falling);
91 	}
92 
93 	return IRQ_HANDLED;
94 }
95 
96 static int srf04_read(struct srf04_data *data)
97 {
98 	int ret;
99 	ktime_t ktime_dt;
100 	u64 dt_ns;
101 	u32 time_ns, distance_mm;
102 
103 	if (data->gpiod_power) {
104 		ret = pm_runtime_resume_and_get(data->dev);
105 		if (ret < 0)
106 			return ret;
107 	}
108 	/*
109 	 * just one read-echo-cycle can take place at a time
110 	 * ==> lock against concurrent reading calls
111 	 */
112 	mutex_lock(&data->lock);
113 
114 	reinit_completion(&data->rising);
115 	reinit_completion(&data->falling);
116 
117 	gpiod_set_value(data->gpiod_trig, 1);
118 	udelay(data->cfg->trigger_pulse_us);
119 	gpiod_set_value(data->gpiod_trig, 0);
120 
121 	if (data->gpiod_power) {
122 		pm_runtime_mark_last_busy(data->dev);
123 		pm_runtime_put_autosuspend(data->dev);
124 	}
125 
126 	/* it should not take more than 20 ms until echo is rising */
127 	ret = wait_for_completion_killable_timeout(&data->rising, HZ/50);
128 	if (ret < 0) {
129 		mutex_unlock(&data->lock);
130 		return ret;
131 	} else if (ret == 0) {
132 		mutex_unlock(&data->lock);
133 		return -ETIMEDOUT;
134 	}
135 
136 	/* it cannot take more than 50 ms until echo is falling */
137 	ret = wait_for_completion_killable_timeout(&data->falling, HZ/20);
138 	if (ret < 0) {
139 		mutex_unlock(&data->lock);
140 		return ret;
141 	} else if (ret == 0) {
142 		mutex_unlock(&data->lock);
143 		return -ETIMEDOUT;
144 	}
145 
146 	ktime_dt = ktime_sub(data->ts_falling, data->ts_rising);
147 
148 	mutex_unlock(&data->lock);
149 
150 	dt_ns = ktime_to_ns(ktime_dt);
151 	/*
152 	 * measuring more than 6,45 meters is beyond the capabilities of
153 	 * the supported sensors
154 	 * ==> filter out invalid results for not measuring echos of
155 	 *     another us sensor
156 	 *
157 	 * formula:
158 	 *         distance     6,45 * 2 m
159 	 * time = ---------- = ------------ = 40438871 ns
160 	 *          speed         319 m/s
161 	 *
162 	 * using a minimum speed at -20 °C of 319 m/s
163 	 */
164 	if (dt_ns > 40438871)
165 		return -EIO;
166 
167 	time_ns = dt_ns;
168 
169 	/*
170 	 * the speed as function of the temperature is approximately:
171 	 *
172 	 * speed = 331,5 + 0,6 * Temp
173 	 *   with Temp in °C
174 	 *   and speed in m/s
175 	 *
176 	 * use 343,5 m/s as ultrasonic speed at 20 °C here in absence of the
177 	 * temperature
178 	 *
179 	 * therefore:
180 	 *             time     343,5     time * 106
181 	 * distance = ------ * ------- = ------------
182 	 *             10^6         2         617176
183 	 *   with time in ns
184 	 *   and distance in mm (one way)
185 	 *
186 	 * because we limit to 6,45 meters the multiplication with 106 just
187 	 * fits into 32 bit
188 	 */
189 	distance_mm = time_ns * 106 / 617176;
190 
191 	return distance_mm;
192 }
193 
194 static int srf04_read_raw(struct iio_dev *indio_dev,
195 			    struct iio_chan_spec const *channel, int *val,
196 			    int *val2, long info)
197 {
198 	struct srf04_data *data = iio_priv(indio_dev);
199 	int ret;
200 
201 	if (channel->type != IIO_DISTANCE)
202 		return -EINVAL;
203 
204 	switch (info) {
205 	case IIO_CHAN_INFO_RAW:
206 		ret = srf04_read(data);
207 		if (ret < 0)
208 			return ret;
209 		*val = ret;
210 		return IIO_VAL_INT;
211 	case IIO_CHAN_INFO_SCALE:
212 		/*
213 		 * theoretical maximum resolution is 3 mm
214 		 * 1 LSB is 1 mm
215 		 */
216 		*val = 0;
217 		*val2 = 1000;
218 		return IIO_VAL_INT_PLUS_MICRO;
219 	default:
220 		return -EINVAL;
221 	}
222 }
223 
224 static const struct iio_info srf04_iio_info = {
225 	.read_raw		= srf04_read_raw,
226 };
227 
228 static const struct iio_chan_spec srf04_chan_spec[] = {
229 	{
230 		.type = IIO_DISTANCE,
231 		.info_mask_separate =
232 				BIT(IIO_CHAN_INFO_RAW) |
233 				BIT(IIO_CHAN_INFO_SCALE),
234 	},
235 };
236 
237 static const struct of_device_id of_srf04_match[] = {
238 	{ .compatible = "devantech,srf04", .data = &srf04_cfg },
239 	{ .compatible = "maxbotix,mb1000", .data = &mb_lv_cfg },
240 	{ .compatible = "maxbotix,mb1010", .data = &mb_lv_cfg },
241 	{ .compatible = "maxbotix,mb1020", .data = &mb_lv_cfg },
242 	{ .compatible = "maxbotix,mb1030", .data = &mb_lv_cfg },
243 	{ .compatible = "maxbotix,mb1040", .data = &mb_lv_cfg },
244 	{},
245 };
246 
247 MODULE_DEVICE_TABLE(of, of_srf04_match);
248 
249 static int srf04_probe(struct platform_device *pdev)
250 {
251 	struct device *dev = &pdev->dev;
252 	struct srf04_data *data;
253 	struct iio_dev *indio_dev;
254 	int ret;
255 
256 	indio_dev = devm_iio_device_alloc(dev, sizeof(struct srf04_data));
257 	if (!indio_dev) {
258 		dev_err(dev, "failed to allocate IIO device\n");
259 		return -ENOMEM;
260 	}
261 
262 	data = iio_priv(indio_dev);
263 	data->dev = dev;
264 	data->cfg = of_match_device(of_srf04_match, dev)->data;
265 
266 	mutex_init(&data->lock);
267 	init_completion(&data->rising);
268 	init_completion(&data->falling);
269 
270 	data->gpiod_trig = devm_gpiod_get(dev, "trig", GPIOD_OUT_LOW);
271 	if (IS_ERR(data->gpiod_trig)) {
272 		dev_err(dev, "failed to get trig-gpios: err=%ld\n",
273 					PTR_ERR(data->gpiod_trig));
274 		return PTR_ERR(data->gpiod_trig);
275 	}
276 
277 	data->gpiod_echo = devm_gpiod_get(dev, "echo", GPIOD_IN);
278 	if (IS_ERR(data->gpiod_echo)) {
279 		dev_err(dev, "failed to get echo-gpios: err=%ld\n",
280 					PTR_ERR(data->gpiod_echo));
281 		return PTR_ERR(data->gpiod_echo);
282 	}
283 
284 	data->gpiod_power = devm_gpiod_get_optional(dev, "power",
285 								GPIOD_OUT_LOW);
286 	if (IS_ERR(data->gpiod_power)) {
287 		dev_err(dev, "failed to get power-gpios: err=%ld\n",
288 						PTR_ERR(data->gpiod_power));
289 		return PTR_ERR(data->gpiod_power);
290 	}
291 	if (data->gpiod_power) {
292 
293 		if (of_property_read_u32(dev->of_node, "startup-time-ms",
294 						&data->startup_time_ms))
295 			data->startup_time_ms = 100;
296 		dev_dbg(dev, "using power gpio: startup-time-ms=%d\n",
297 							data->startup_time_ms);
298 	}
299 
300 	if (gpiod_cansleep(data->gpiod_echo)) {
301 		dev_err(data->dev, "cansleep-GPIOs not supported\n");
302 		return -ENODEV;
303 	}
304 
305 	data->irqnr = gpiod_to_irq(data->gpiod_echo);
306 	if (data->irqnr < 0) {
307 		dev_err(data->dev, "gpiod_to_irq: %d\n", data->irqnr);
308 		return data->irqnr;
309 	}
310 
311 	ret = devm_request_irq(dev, data->irqnr, srf04_handle_irq,
312 			IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
313 			pdev->name, indio_dev);
314 	if (ret < 0) {
315 		dev_err(data->dev, "request_irq: %d\n", ret);
316 		return ret;
317 	}
318 
319 	platform_set_drvdata(pdev, indio_dev);
320 
321 	indio_dev->name = "srf04";
322 	indio_dev->info = &srf04_iio_info;
323 	indio_dev->modes = INDIO_DIRECT_MODE;
324 	indio_dev->channels = srf04_chan_spec;
325 	indio_dev->num_channels = ARRAY_SIZE(srf04_chan_spec);
326 
327 	ret = iio_device_register(indio_dev);
328 	if (ret < 0) {
329 		dev_err(data->dev, "iio_device_register: %d\n", ret);
330 		return ret;
331 	}
332 
333 	if (data->gpiod_power) {
334 		pm_runtime_set_autosuspend_delay(data->dev, 1000);
335 		pm_runtime_use_autosuspend(data->dev);
336 
337 		ret = pm_runtime_set_active(data->dev);
338 		if (ret) {
339 			dev_err(data->dev, "pm_runtime_set_active: %d\n", ret);
340 			iio_device_unregister(indio_dev);
341 		}
342 
343 		pm_runtime_enable(data->dev);
344 		pm_runtime_idle(data->dev);
345 	}
346 
347 	return ret;
348 }
349 
350 static int srf04_remove(struct platform_device *pdev)
351 {
352 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
353 	struct srf04_data *data = iio_priv(indio_dev);
354 
355 	iio_device_unregister(indio_dev);
356 
357 	if (data->gpiod_power) {
358 		pm_runtime_disable(data->dev);
359 		pm_runtime_set_suspended(data->dev);
360 	}
361 
362 	return 0;
363 }
364 
365 static int __maybe_unused srf04_pm_runtime_suspend(struct device *dev)
366 {
367 	struct platform_device *pdev = container_of(dev,
368 						struct platform_device, dev);
369 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
370 	struct srf04_data *data = iio_priv(indio_dev);
371 
372 	gpiod_set_value(data->gpiod_power, 0);
373 
374 	return 0;
375 }
376 
377 static int __maybe_unused srf04_pm_runtime_resume(struct device *dev)
378 {
379 	struct platform_device *pdev = container_of(dev,
380 						struct platform_device, dev);
381 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
382 	struct srf04_data *data = iio_priv(indio_dev);
383 
384 	gpiod_set_value(data->gpiod_power, 1);
385 	msleep(data->startup_time_ms);
386 
387 	return 0;
388 }
389 
390 static const struct dev_pm_ops srf04_pm_ops = {
391 	SET_RUNTIME_PM_OPS(srf04_pm_runtime_suspend,
392 				srf04_pm_runtime_resume, NULL)
393 };
394 
395 static struct platform_driver srf04_driver = {
396 	.probe		= srf04_probe,
397 	.remove		= srf04_remove,
398 	.driver		= {
399 		.name		= "srf04-gpio",
400 		.of_match_table	= of_srf04_match,
401 		.pm		= &srf04_pm_ops,
402 	},
403 };
404 
405 module_platform_driver(srf04_driver);
406 
407 MODULE_AUTHOR("Andreas Klinger <ak@it-klinger.de>");
408 MODULE_DESCRIPTION("SRF04 ultrasonic sensor for distance measuring using GPIOs");
409 MODULE_LICENSE("GPL");
410 MODULE_ALIAS("platform:srf04");
411