xref: /openbmc/linux/drivers/iio/proximity/srf04.c (revision 1364262c)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * SRF04: ultrasonic sensor for distance measuring by using GPIOs
4  *
5  * Copyright (c) 2017 Andreas Klinger <ak@it-klinger.de>
6  *
7  * For details about the device see:
8  * https://www.robot-electronics.co.uk/htm/srf04tech.htm
9  *
10  * the measurement cycle as timing diagram looks like:
11  *
12  *          +---+
13  * GPIO     |   |
14  * trig:  --+   +------------------------------------------------------
15  *          ^   ^
16  *          |<->|
17  *         udelay(trigger_pulse_us)
18  *
19  * ultra           +-+ +-+ +-+
20  * sonic           | | | | | |
21  * burst: ---------+ +-+ +-+ +-----------------------------------------
22  *                           .
23  * ultra                     .              +-+ +-+ +-+
24  * sonic                     .              | | | | | |
25  * echo:  ----------------------------------+ +-+ +-+ +----------------
26  *                           .                        .
27  *                           +------------------------+
28  * GPIO                      |                        |
29  * echo:  -------------------+                        +---------------
30  *                           ^                        ^
31  *                           interrupt                interrupt
32  *                           (ts_rising)              (ts_falling)
33  *                           |<---------------------->|
34  *                              pulse time measured
35  *                              --> one round trip of ultra sonic waves
36  */
37 #include <linux/err.h>
38 #include <linux/gpio/consumer.h>
39 #include <linux/kernel.h>
40 #include <linux/mod_devicetable.h>
41 #include <linux/module.h>
42 #include <linux/platform_device.h>
43 #include <linux/property.h>
44 #include <linux/sched.h>
45 #include <linux/interrupt.h>
46 #include <linux/delay.h>
47 #include <linux/pm_runtime.h>
48 #include <linux/iio/iio.h>
49 #include <linux/iio/sysfs.h>
50 
51 struct srf04_cfg {
52 	unsigned long trigger_pulse_us;
53 };
54 
55 struct srf04_data {
56 	struct device		*dev;
57 	struct gpio_desc	*gpiod_trig;
58 	struct gpio_desc	*gpiod_echo;
59 	struct gpio_desc	*gpiod_power;
60 	struct mutex		lock;
61 	int			irqnr;
62 	ktime_t			ts_rising;
63 	ktime_t			ts_falling;
64 	struct completion	rising;
65 	struct completion	falling;
66 	const struct srf04_cfg	*cfg;
67 	int			startup_time_ms;
68 };
69 
70 static const struct srf04_cfg srf04_cfg = {
71 	.trigger_pulse_us = 10,
72 };
73 
74 static const struct srf04_cfg mb_lv_cfg = {
75 	.trigger_pulse_us = 20,
76 };
77 
srf04_handle_irq(int irq,void * dev_id)78 static irqreturn_t srf04_handle_irq(int irq, void *dev_id)
79 {
80 	struct iio_dev *indio_dev = dev_id;
81 	struct srf04_data *data = iio_priv(indio_dev);
82 	ktime_t now = ktime_get();
83 
84 	if (gpiod_get_value(data->gpiod_echo)) {
85 		data->ts_rising = now;
86 		complete(&data->rising);
87 	} else {
88 		data->ts_falling = now;
89 		complete(&data->falling);
90 	}
91 
92 	return IRQ_HANDLED;
93 }
94 
srf04_read(struct srf04_data * data)95 static int srf04_read(struct srf04_data *data)
96 {
97 	int ret;
98 	ktime_t ktime_dt;
99 	u64 dt_ns;
100 	u32 time_ns, distance_mm;
101 
102 	if (data->gpiod_power) {
103 		ret = pm_runtime_resume_and_get(data->dev);
104 		if (ret < 0)
105 			return ret;
106 	}
107 	/*
108 	 * just one read-echo-cycle can take place at a time
109 	 * ==> lock against concurrent reading calls
110 	 */
111 	mutex_lock(&data->lock);
112 
113 	reinit_completion(&data->rising);
114 	reinit_completion(&data->falling);
115 
116 	gpiod_set_value(data->gpiod_trig, 1);
117 	udelay(data->cfg->trigger_pulse_us);
118 	gpiod_set_value(data->gpiod_trig, 0);
119 
120 	if (data->gpiod_power) {
121 		pm_runtime_mark_last_busy(data->dev);
122 		pm_runtime_put_autosuspend(data->dev);
123 	}
124 
125 	/* it should not take more than 20 ms until echo is rising */
126 	ret = wait_for_completion_killable_timeout(&data->rising, HZ/50);
127 	if (ret < 0) {
128 		mutex_unlock(&data->lock);
129 		return ret;
130 	} else if (ret == 0) {
131 		mutex_unlock(&data->lock);
132 		return -ETIMEDOUT;
133 	}
134 
135 	/* it cannot take more than 50 ms until echo is falling */
136 	ret = wait_for_completion_killable_timeout(&data->falling, HZ/20);
137 	if (ret < 0) {
138 		mutex_unlock(&data->lock);
139 		return ret;
140 	} else if (ret == 0) {
141 		mutex_unlock(&data->lock);
142 		return -ETIMEDOUT;
143 	}
144 
145 	ktime_dt = ktime_sub(data->ts_falling, data->ts_rising);
146 
147 	mutex_unlock(&data->lock);
148 
149 	dt_ns = ktime_to_ns(ktime_dt);
150 	/*
151 	 * measuring more than 6,45 meters is beyond the capabilities of
152 	 * the supported sensors
153 	 * ==> filter out invalid results for not measuring echos of
154 	 *     another us sensor
155 	 *
156 	 * formula:
157 	 *         distance     6,45 * 2 m
158 	 * time = ---------- = ------------ = 40438871 ns
159 	 *          speed         319 m/s
160 	 *
161 	 * using a minimum speed at -20 °C of 319 m/s
162 	 */
163 	if (dt_ns > 40438871)
164 		return -EIO;
165 
166 	time_ns = dt_ns;
167 
168 	/*
169 	 * the speed as function of the temperature is approximately:
170 	 *
171 	 * speed = 331,5 + 0,6 * Temp
172 	 *   with Temp in °C
173 	 *   and speed in m/s
174 	 *
175 	 * use 343,5 m/s as ultrasonic speed at 20 °C here in absence of the
176 	 * temperature
177 	 *
178 	 * therefore:
179 	 *             time     343,5     time * 106
180 	 * distance = ------ * ------- = ------------
181 	 *             10^6         2         617176
182 	 *   with time in ns
183 	 *   and distance in mm (one way)
184 	 *
185 	 * because we limit to 6,45 meters the multiplication with 106 just
186 	 * fits into 32 bit
187 	 */
188 	distance_mm = time_ns * 106 / 617176;
189 
190 	return distance_mm;
191 }
192 
srf04_read_raw(struct iio_dev * indio_dev,struct iio_chan_spec const * channel,int * val,int * val2,long info)193 static int srf04_read_raw(struct iio_dev *indio_dev,
194 			    struct iio_chan_spec const *channel, int *val,
195 			    int *val2, long info)
196 {
197 	struct srf04_data *data = iio_priv(indio_dev);
198 	int ret;
199 
200 	if (channel->type != IIO_DISTANCE)
201 		return -EINVAL;
202 
203 	switch (info) {
204 	case IIO_CHAN_INFO_RAW:
205 		ret = srf04_read(data);
206 		if (ret < 0)
207 			return ret;
208 		*val = ret;
209 		return IIO_VAL_INT;
210 	case IIO_CHAN_INFO_SCALE:
211 		/*
212 		 * theoretical maximum resolution is 3 mm
213 		 * 1 LSB is 1 mm
214 		 */
215 		*val = 0;
216 		*val2 = 1000;
217 		return IIO_VAL_INT_PLUS_MICRO;
218 	default:
219 		return -EINVAL;
220 	}
221 }
222 
223 static const struct iio_info srf04_iio_info = {
224 	.read_raw		= srf04_read_raw,
225 };
226 
227 static const struct iio_chan_spec srf04_chan_spec[] = {
228 	{
229 		.type = IIO_DISTANCE,
230 		.info_mask_separate =
231 				BIT(IIO_CHAN_INFO_RAW) |
232 				BIT(IIO_CHAN_INFO_SCALE),
233 	},
234 };
235 
236 static const struct of_device_id of_srf04_match[] = {
237 	{ .compatible = "devantech,srf04", .data = &srf04_cfg },
238 	{ .compatible = "maxbotix,mb1000", .data = &mb_lv_cfg },
239 	{ .compatible = "maxbotix,mb1010", .data = &mb_lv_cfg },
240 	{ .compatible = "maxbotix,mb1020", .data = &mb_lv_cfg },
241 	{ .compatible = "maxbotix,mb1030", .data = &mb_lv_cfg },
242 	{ .compatible = "maxbotix,mb1040", .data = &mb_lv_cfg },
243 	{},
244 };
245 
246 MODULE_DEVICE_TABLE(of, of_srf04_match);
247 
srf04_probe(struct platform_device * pdev)248 static int srf04_probe(struct platform_device *pdev)
249 {
250 	struct device *dev = &pdev->dev;
251 	struct srf04_data *data;
252 	struct iio_dev *indio_dev;
253 	int ret;
254 
255 	indio_dev = devm_iio_device_alloc(dev, sizeof(struct srf04_data));
256 	if (!indio_dev) {
257 		dev_err(dev, "failed to allocate IIO device\n");
258 		return -ENOMEM;
259 	}
260 
261 	data = iio_priv(indio_dev);
262 	data->dev = dev;
263 	data->cfg = device_get_match_data(dev);
264 
265 	mutex_init(&data->lock);
266 	init_completion(&data->rising);
267 	init_completion(&data->falling);
268 
269 	data->gpiod_trig = devm_gpiod_get(dev, "trig", GPIOD_OUT_LOW);
270 	if (IS_ERR(data->gpiod_trig)) {
271 		dev_err(dev, "failed to get trig-gpios: err=%ld\n",
272 					PTR_ERR(data->gpiod_trig));
273 		return PTR_ERR(data->gpiod_trig);
274 	}
275 
276 	data->gpiod_echo = devm_gpiod_get(dev, "echo", GPIOD_IN);
277 	if (IS_ERR(data->gpiod_echo)) {
278 		dev_err(dev, "failed to get echo-gpios: err=%ld\n",
279 					PTR_ERR(data->gpiod_echo));
280 		return PTR_ERR(data->gpiod_echo);
281 	}
282 
283 	data->gpiod_power = devm_gpiod_get_optional(dev, "power",
284 								GPIOD_OUT_LOW);
285 	if (IS_ERR(data->gpiod_power)) {
286 		dev_err(dev, "failed to get power-gpios: err=%ld\n",
287 						PTR_ERR(data->gpiod_power));
288 		return PTR_ERR(data->gpiod_power);
289 	}
290 	if (data->gpiod_power) {
291 		data->startup_time_ms = 100;
292 		device_property_read_u32(dev, "startup-time-ms", &data->startup_time_ms);
293 		dev_dbg(dev, "using power gpio: startup-time-ms=%d\n",
294 							data->startup_time_ms);
295 	}
296 
297 	if (gpiod_cansleep(data->gpiod_echo)) {
298 		dev_err(data->dev, "cansleep-GPIOs not supported\n");
299 		return -ENODEV;
300 	}
301 
302 	data->irqnr = gpiod_to_irq(data->gpiod_echo);
303 	if (data->irqnr < 0) {
304 		dev_err(data->dev, "gpiod_to_irq: %d\n", data->irqnr);
305 		return data->irqnr;
306 	}
307 
308 	ret = devm_request_irq(dev, data->irqnr, srf04_handle_irq,
309 			IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
310 			pdev->name, indio_dev);
311 	if (ret < 0) {
312 		dev_err(data->dev, "request_irq: %d\n", ret);
313 		return ret;
314 	}
315 
316 	platform_set_drvdata(pdev, indio_dev);
317 
318 	indio_dev->name = "srf04";
319 	indio_dev->info = &srf04_iio_info;
320 	indio_dev->modes = INDIO_DIRECT_MODE;
321 	indio_dev->channels = srf04_chan_spec;
322 	indio_dev->num_channels = ARRAY_SIZE(srf04_chan_spec);
323 
324 	ret = iio_device_register(indio_dev);
325 	if (ret < 0) {
326 		dev_err(data->dev, "iio_device_register: %d\n", ret);
327 		return ret;
328 	}
329 
330 	if (data->gpiod_power) {
331 		pm_runtime_set_autosuspend_delay(data->dev, 1000);
332 		pm_runtime_use_autosuspend(data->dev);
333 
334 		ret = pm_runtime_set_active(data->dev);
335 		if (ret) {
336 			dev_err(data->dev, "pm_runtime_set_active: %d\n", ret);
337 			iio_device_unregister(indio_dev);
338 		}
339 
340 		pm_runtime_enable(data->dev);
341 		pm_runtime_idle(data->dev);
342 	}
343 
344 	return ret;
345 }
346 
srf04_remove(struct platform_device * pdev)347 static int srf04_remove(struct platform_device *pdev)
348 {
349 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
350 	struct srf04_data *data = iio_priv(indio_dev);
351 
352 	iio_device_unregister(indio_dev);
353 
354 	if (data->gpiod_power) {
355 		pm_runtime_disable(data->dev);
356 		pm_runtime_set_suspended(data->dev);
357 	}
358 
359 	return 0;
360 }
361 
srf04_pm_runtime_suspend(struct device * dev)362 static int  srf04_pm_runtime_suspend(struct device *dev)
363 {
364 	struct platform_device *pdev = container_of(dev,
365 						struct platform_device, dev);
366 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
367 	struct srf04_data *data = iio_priv(indio_dev);
368 
369 	gpiod_set_value(data->gpiod_power, 0);
370 
371 	return 0;
372 }
373 
srf04_pm_runtime_resume(struct device * dev)374 static int srf04_pm_runtime_resume(struct device *dev)
375 {
376 	struct platform_device *pdev = container_of(dev,
377 						struct platform_device, dev);
378 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
379 	struct srf04_data *data = iio_priv(indio_dev);
380 
381 	gpiod_set_value(data->gpiod_power, 1);
382 	msleep(data->startup_time_ms);
383 
384 	return 0;
385 }
386 
387 static const struct dev_pm_ops srf04_pm_ops = {
388 	RUNTIME_PM_OPS(srf04_pm_runtime_suspend,
389 		       srf04_pm_runtime_resume, NULL)
390 };
391 
392 static struct platform_driver srf04_driver = {
393 	.probe		= srf04_probe,
394 	.remove		= srf04_remove,
395 	.driver		= {
396 		.name		= "srf04-gpio",
397 		.of_match_table	= of_srf04_match,
398 		.pm		= pm_ptr(&srf04_pm_ops),
399 	},
400 };
401 
402 module_platform_driver(srf04_driver);
403 
404 MODULE_AUTHOR("Andreas Klinger <ak@it-klinger.de>");
405 MODULE_DESCRIPTION("SRF04 ultrasonic sensor for distance measuring using GPIOs");
406 MODULE_LICENSE("GPL");
407 MODULE_ALIAS("platform:srf04");
408