xref: /openbmc/linux/drivers/iio/pressure/dlhl60d.c (revision c4f7ac64)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * All Sensors DLH series low voltage digital pressure sensors
4  *
5  * Copyright (c) 2019 AVL DiTEST GmbH
6  *   Tomislav Denis <tomislav.denis@avl.com>
7  *
8  * Datasheet: https://www.allsensors.com/cad/DS-0355_Rev_B.PDF
9  */
10 
11 #include <linux/module.h>
12 #include <linux/delay.h>
13 #include <linux/i2c.h>
14 #include <linux/iio/iio.h>
15 #include <linux/iio/buffer.h>
16 #include <linux/iio/trigger_consumer.h>
17 #include <linux/iio/triggered_buffer.h>
18 #include <asm/unaligned.h>
19 
20 /* Commands */
21 #define DLH_START_SINGLE    0xAA
22 
23 /* Status bits */
24 #define DLH_STATUS_OK       0x40
25 
26 /* DLH  data format */
27 #define DLH_NUM_READ_BYTES  7
28 #define DLH_NUM_DATA_BYTES  3
29 #define DLH_NUM_PR_BITS     24
30 #define DLH_NUM_TEMP_BITS   24
31 
32 /* DLH  timings */
33 #define DLH_SINGLE_DUT_MS   5
34 
35 enum dhl_ids {
36 	dlhl60d,
37 	dlhl60g,
38 };
39 
40 struct dlh_info {
41 	u8 osdig;           /* digital offset factor */
42 	unsigned int fss;   /* full scale span (inch H2O) */
43 };
44 
45 struct dlh_state {
46 	struct i2c_client *client;
47 	struct dlh_info info;
48 	bool use_interrupt;
49 	struct completion completion;
50 	u8 rx_buf[DLH_NUM_READ_BYTES] ____cacheline_aligned;
51 };
52 
53 static struct dlh_info dlh_info_tbl[] = {
54 	[dlhl60d] = {
55 		.osdig = 2,
56 		.fss = 120,
57 	},
58 	[dlhl60g] = {
59 		.osdig = 10,
60 		.fss = 60,
61 	},
62 };
63 
64 
65 static int dlh_cmd_start_single(struct dlh_state *st)
66 {
67 	int ret;
68 
69 	ret = i2c_smbus_write_byte(st->client, DLH_START_SINGLE);
70 	if (ret)
71 		dev_err(&st->client->dev,
72 			"%s: I2C write byte failed\n", __func__);
73 
74 	return ret;
75 }
76 
77 static int dlh_cmd_read_data(struct dlh_state *st)
78 {
79 	int ret;
80 
81 	ret = i2c_master_recv(st->client, st->rx_buf, DLH_NUM_READ_BYTES);
82 	if (ret < 0) {
83 		dev_err(&st->client->dev,
84 			"%s: I2C read block failed\n", __func__);
85 		return ret;
86 	}
87 
88 	if (st->rx_buf[0] != DLH_STATUS_OK) {
89 		dev_err(&st->client->dev,
90 			"%s: invalid status 0x%02x\n", __func__, st->rx_buf[0]);
91 		return -EBUSY;
92 	}
93 
94 	return 0;
95 }
96 
97 static int dlh_start_capture_and_read(struct dlh_state *st)
98 {
99 	int ret;
100 
101 	if (st->use_interrupt)
102 		reinit_completion(&st->completion);
103 
104 	ret = dlh_cmd_start_single(st);
105 	if (ret)
106 		return ret;
107 
108 	if (st->use_interrupt) {
109 		ret = wait_for_completion_timeout(&st->completion,
110 			msecs_to_jiffies(DLH_SINGLE_DUT_MS));
111 		if (!ret) {
112 			dev_err(&st->client->dev,
113 				"%s: conversion timed out\n", __func__);
114 			return -ETIMEDOUT;
115 		}
116 	} else {
117 		mdelay(DLH_SINGLE_DUT_MS);
118 	}
119 
120 	return dlh_cmd_read_data(st);
121 }
122 
123 static int dlh_read_direct(struct dlh_state *st,
124 	unsigned int *pressure, unsigned int *temperature)
125 {
126 	int ret;
127 
128 	ret = dlh_start_capture_and_read(st);
129 	if (ret)
130 		return ret;
131 
132 	*pressure = get_unaligned_be32(&st->rx_buf[1]) >> 8;
133 	*temperature = get_unaligned_be32(&st->rx_buf[3]) &
134 		GENMASK(DLH_NUM_TEMP_BITS - 1, 0);
135 
136 	return 0;
137 }
138 
139 static int dlh_read_raw(struct iio_dev *indio_dev,
140 	struct iio_chan_spec const *channel, int *value,
141 	int *value2, long mask)
142 {
143 	struct dlh_state *st = iio_priv(indio_dev);
144 	unsigned int pressure, temperature;
145 	int ret;
146 	s64 tmp;
147 	s32 rem;
148 
149 	switch (mask) {
150 	case IIO_CHAN_INFO_RAW:
151 		ret = iio_device_claim_direct_mode(indio_dev);
152 		if (ret)
153 			return ret;
154 
155 		ret = dlh_read_direct(st, &pressure, &temperature);
156 		iio_device_release_direct_mode(indio_dev);
157 		if (ret)
158 			return ret;
159 
160 		switch (channel->type) {
161 		case IIO_PRESSURE:
162 			*value = pressure;
163 			return IIO_VAL_INT;
164 
165 		case IIO_TEMP:
166 			*value = temperature;
167 			return IIO_VAL_INT;
168 
169 		default:
170 			return -EINVAL;
171 		}
172 	case IIO_CHAN_INFO_SCALE:
173 		switch (channel->type) {
174 		case IIO_PRESSURE:
175 			tmp = div_s64(125LL * st->info.fss * 24909 * 100,
176 				1 << DLH_NUM_PR_BITS);
177 			tmp = div_s64_rem(tmp, 1000000000LL, &rem);
178 			*value = tmp;
179 			*value2 = rem;
180 			return IIO_VAL_INT_PLUS_NANO;
181 
182 		case IIO_TEMP:
183 			*value = 125 * 1000;
184 			*value2 = DLH_NUM_TEMP_BITS;
185 			return IIO_VAL_FRACTIONAL_LOG2;
186 
187 		default:
188 			return -EINVAL;
189 		}
190 	case IIO_CHAN_INFO_OFFSET:
191 		switch (channel->type) {
192 		case IIO_PRESSURE:
193 			*value = -125 * st->info.fss * 24909;
194 			*value2 = 100 * st->info.osdig * 100000;
195 			return IIO_VAL_FRACTIONAL;
196 
197 		case IIO_TEMP:
198 			*value = -40 * 1000;
199 			return IIO_VAL_INT;
200 
201 		default:
202 			return -EINVAL;
203 		}
204 	}
205 
206 	return -EINVAL;
207 }
208 
209 static const struct iio_info dlh_info = {
210 	.read_raw = dlh_read_raw,
211 };
212 
213 static const struct iio_chan_spec dlh_channels[] = {
214 	{
215 		.type = IIO_PRESSURE,
216 		.indexed = 1,
217 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
218 		.info_mask_shared_by_type =
219 			BIT(IIO_CHAN_INFO_SCALE) |
220 			BIT(IIO_CHAN_INFO_OFFSET),
221 		.scan_index = 0,
222 		.scan_type = {
223 			.sign = 'u',
224 			.realbits = DLH_NUM_PR_BITS,
225 			.storagebits = 32,
226 			.shift = 8,
227 			.endianness = IIO_BE,
228 		},
229 	}, {
230 		.type = IIO_TEMP,
231 		.indexed = 1,
232 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
233 		.info_mask_shared_by_type =
234 			BIT(IIO_CHAN_INFO_SCALE) |
235 			BIT(IIO_CHAN_INFO_OFFSET),
236 		.scan_index = 1,
237 		.scan_type = {
238 			.sign = 'u',
239 			.realbits = DLH_NUM_TEMP_BITS,
240 			.storagebits = 32,
241 			.shift = 8,
242 			.endianness = IIO_BE,
243 		},
244 	}
245 };
246 
247 static irqreturn_t dlh_trigger_handler(int irq, void *private)
248 {
249 	struct iio_poll_func *pf = private;
250 	struct iio_dev *indio_dev = pf->indio_dev;
251 	struct dlh_state *st = iio_priv(indio_dev);
252 	int ret;
253 	unsigned int chn, i = 0;
254 	__be32 tmp_buf[2];
255 
256 	ret = dlh_start_capture_and_read(st);
257 	if (ret)
258 		goto out;
259 
260 	for_each_set_bit(chn, indio_dev->active_scan_mask,
261 		indio_dev->masklength) {
262 		memcpy(tmp_buf + i,
263 			&st->rx_buf[1] + chn * DLH_NUM_DATA_BYTES,
264 			DLH_NUM_DATA_BYTES);
265 		i++;
266 	}
267 
268 	iio_push_to_buffers(indio_dev, tmp_buf);
269 
270 out:
271 	iio_trigger_notify_done(indio_dev->trig);
272 
273 	return IRQ_HANDLED;
274 }
275 
276 static irqreturn_t dlh_interrupt(int irq, void *private)
277 {
278 	struct iio_dev *indio_dev = private;
279 	struct dlh_state *st = iio_priv(indio_dev);
280 
281 	complete(&st->completion);
282 
283 	return IRQ_HANDLED;
284 };
285 
286 static int dlh_probe(struct i2c_client *client,
287 	const struct i2c_device_id *id)
288 {
289 	struct dlh_state *st;
290 	struct iio_dev *indio_dev;
291 	int ret;
292 
293 	if (!i2c_check_functionality(client->adapter,
294 		I2C_FUNC_I2C | I2C_FUNC_SMBUS_WRITE_BYTE)) {
295 		dev_err(&client->dev,
296 			"adapter doesn't support required i2c functionality\n");
297 		return -EOPNOTSUPP;
298 	}
299 
300 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st));
301 	if (!indio_dev) {
302 		dev_err(&client->dev, "failed to allocate iio device\n");
303 		return -ENOMEM;
304 	}
305 
306 	i2c_set_clientdata(client, indio_dev);
307 
308 	st = iio_priv(indio_dev);
309 	st->info = dlh_info_tbl[id->driver_data];
310 	st->client = client;
311 	st->use_interrupt = false;
312 
313 	indio_dev->name = id->name;
314 	indio_dev->info = &dlh_info;
315 	indio_dev->modes = INDIO_DIRECT_MODE;
316 	indio_dev->channels =  dlh_channels;
317 	indio_dev->num_channels = ARRAY_SIZE(dlh_channels);
318 
319 	if (client->irq > 0) {
320 		ret = devm_request_threaded_irq(&client->dev, client->irq,
321 			dlh_interrupt, NULL,
322 			IRQF_TRIGGER_RISING | IRQF_ONESHOT,
323 			id->name, indio_dev);
324 		if (ret) {
325 			dev_err(&client->dev, "failed to allocate threaded irq");
326 			return ret;
327 		}
328 
329 		st->use_interrupt = true;
330 		init_completion(&st->completion);
331 	}
332 
333 	ret = devm_iio_triggered_buffer_setup(&client->dev, indio_dev,
334 		NULL, &dlh_trigger_handler, NULL);
335 	if (ret) {
336 		dev_err(&client->dev, "failed to setup iio buffer\n");
337 		return ret;
338 	}
339 
340 	ret = devm_iio_device_register(&client->dev, indio_dev);
341 	if (ret)
342 		dev_err(&client->dev, "failed to register iio device\n");
343 
344 	return ret;
345 }
346 
347 static const struct of_device_id dlh_of_match[] = {
348 	{ .compatible = "asc,dlhl60d" },
349 	{ .compatible = "asc,dlhl60g" },
350 	{}
351 };
352 MODULE_DEVICE_TABLE(of, dlh_of_match);
353 
354 static const struct i2c_device_id dlh_id[] = {
355 	{ "dlhl60d",    dlhl60d },
356 	{ "dlhl60g",    dlhl60g },
357 	{}
358 };
359 MODULE_DEVICE_TABLE(i2c, dlh_id);
360 
361 static struct i2c_driver dlh_driver = {
362 	.driver = {
363 		.name = "dlhl60d",
364 		.of_match_table = dlh_of_match,
365 	},
366 	.probe = dlh_probe,
367 	.id_table = dlh_id,
368 };
369 module_i2c_driver(dlh_driver);
370 
371 MODULE_AUTHOR("Tomislav Denis <tomislav.denis@avl.com>");
372 MODULE_DESCRIPTION("Driver for All Sensors DLH series pressure sensors");
373 MODULE_LICENSE("GPL v2");
374