1# SPDX-License-Identifier: GPL-2.0-only 2 3# 4# Light sensors 5# 6# When adding new entries keep the list in alphabetical order 7 8menu "Light sensors" 9 10config ACPI_ALS 11 tristate "ACPI Ambient Light Sensor" 12 depends on ACPI 13 select IIO_BUFFER 14 select IIO_TRIGGERED_BUFFER 15 select IIO_KFIFO_BUF 16 help 17 Say Y here if you want to build a driver for the ACPI0008 18 Ambient Light Sensor. 19 20 To compile this driver as a module, choose M here: the module will 21 be called acpi-als. 22 23config ADJD_S311 24 tristate "ADJD-S311-CR999 digital color sensor" 25 select IIO_BUFFER 26 select IIO_TRIGGERED_BUFFER 27 depends on I2C 28 help 29 If you say yes here you get support for the Avago ADJD-S311-CR999 30 digital color light sensor. 31 32 This driver can also be built as a module. If so, the module 33 will be called adjd_s311. 34 35config ADUX1020 36 tristate "ADUX1020 photometric sensor" 37 select REGMAP_I2C 38 depends on I2C 39 help 40 Say Y here if you want to build a driver for the Analog Devices 41 ADUX1020 photometric sensor. 42 43 To compile this driver as a module, choose M here: the 44 module will be called adux1020. 45 46config AL3010 47 tristate "AL3010 ambient light sensor" 48 depends on I2C 49 help 50 Say Y here if you want to build a driver for the Dyna Image AL3010 51 ambient light sensor. 52 53 To compile this driver as a module, choose M here: the 54 module will be called al3010. 55 56config AL3320A 57 tristate "AL3320A ambient light sensor" 58 depends on I2C 59 help 60 Say Y here if you want to build a driver for the Dyna Image AL3320A 61 ambient light sensor. 62 63 To compile this driver as a module, choose M here: the 64 module will be called al3320a. 65 66config APDS9300 67 tristate "APDS9300 ambient light sensor" 68 depends on I2C 69 help 70 Say Y here if you want to build a driver for the Avago APDS9300 71 ambient light sensor. 72 73 To compile this driver as a module, choose M here: the 74 module will be called apds9300. 75 76config APDS9960 77 tristate "Avago APDS9960 gesture/RGB/ALS/proximity sensor" 78 select REGMAP_I2C 79 select IIO_BUFFER 80 select IIO_KFIFO_BUF 81 depends on I2C 82 help 83 Say Y here to build I2C interface support for the Avago 84 APDS9960 gesture/RGB/ALS/proximity sensor. 85 86 To compile this driver as a module, choose M here: the 87 module will be called apds9960 88 89config AS73211 90 tristate "AMS AS73211 XYZ color sensor" 91 depends on I2C 92 select IIO_BUFFER 93 select IIO_TRIGGERED_BUFFER 94 help 95 If you say yes here you get support for the AMS AS73211 96 JENCOLOR(R) Digital XYZ Sensor. 97 98 For triggered measurements, you will need an additional trigger driver 99 like IIO_HRTIMER_TRIGGER or IIO_SYSFS_TRIGGER. 100 101 This driver can also be built as a module. If so, the module 102 will be called as73211. 103 104config BH1750 105 tristate "ROHM BH1750 ambient light sensor" 106 depends on I2C 107 help 108 Say Y here to build support for the ROHM BH1710, BH1715, BH1721, 109 BH1750, BH1751 ambient light sensors. 110 111 To compile this driver as a module, choose M here: the module will 112 be called bh1750. 113 114config BH1780 115 tristate "ROHM BH1780 ambient light sensor" 116 depends on I2C 117 help 118 Say Y here to build support for the ROHM BH1780GLI ambient 119 light sensor. 120 121 To compile this driver as a module, choose M here: the module will 122 be called bh1780. 123 124config CM32181 125 depends on I2C 126 tristate "CM32181 driver" 127 help 128 Say Y here if you use cm32181. 129 This option enables ambient light sensor using 130 Capella cm32181 device driver. 131 132 To compile this driver as a module, choose M here: 133 the module will be called cm32181. 134 135config CM3232 136 depends on I2C 137 tristate "CM3232 ambient light sensor" 138 help 139 Say Y here if you use cm3232. 140 This option enables ambient light sensor using 141 Capella Microsystems cm3232 device driver. 142 143 To compile this driver as a module, choose M here: 144 the module will be called cm3232. 145 146config CM3323 147 depends on I2C 148 tristate "Capella CM3323 color light sensor" 149 help 150 Say Y here if you want to build a driver for Capella CM3323 151 color sensor. 152 153 To compile this driver as a module, choose M here: the module will 154 be called cm3323. 155 156config CM3605 157 tristate "Capella CM3605 ambient light and proximity sensor" 158 help 159 Say Y here if you want to build a driver for Capella CM3605 160 ambient light and short range proximity sensor. 161 162 To compile this driver as a module, choose M here: the module will 163 be called cm3605. 164 165config CM36651 166 depends on I2C 167 tristate "CM36651 driver" 168 help 169 Say Y here if you use cm36651. 170 This option enables proximity & RGB sensor using 171 Capella cm36651 device driver. 172 173 To compile this driver as a module, choose M here: 174 the module will be called cm36651. 175 176config IIO_CROS_EC_LIGHT_PROX 177 tristate "ChromeOS EC Light and Proximity Sensors" 178 depends on IIO_CROS_EC_SENSORS_CORE 179 help 180 Say Y here if you use the light and proximity sensors 181 presented by the ChromeOS EC Sensor hub. 182 183 To compile this driver as a module, choose M here: 184 the module will be called cros_ec_light_prox. 185 186config GP2AP002 187 tristate "Sharp GP2AP002 Proximity/ALS sensor" 188 depends on I2C 189 select REGMAP 190 help 191 Say Y here if you have a Sharp GP2AP002 proximity/ALS combo-chip 192 hooked to an I2C bus. 193 194 To compile this driver as a module, choose M here: the 195 module will be called gp2ap002. 196 197config GP2AP020A00F 198 tristate "Sharp GP2AP020A00F Proximity/ALS sensor" 199 depends on I2C 200 select REGMAP_I2C 201 select IIO_BUFFER 202 select IIO_TRIGGERED_BUFFER 203 select IRQ_WORK 204 help 205 Say Y here if you have a Sharp GP2AP020A00F proximity/ALS combo-chip 206 hooked to an I2C bus. 207 208 To compile this driver as a module, choose M here: the 209 module will be called gp2ap020a00f. 210 211config IQS621_ALS 212 tristate "Azoteq IQS621/622 ambient light sensors" 213 depends on MFD_IQS62X || COMPILE_TEST 214 help 215 Say Y here if you want to build support for the Azoteq IQS621 216 and IQS622 ambient light sensors. 217 218 To compile this driver as a module, choose M here: the module 219 will be called iqs621-als. 220 221config SENSORS_ISL29018 222 tristate "Intersil 29018 light and proximity sensor" 223 depends on I2C 224 select REGMAP_I2C 225 default n 226 help 227 If you say yes here you get support for ambient light sensing and 228 proximity infrared sensing from Intersil ISL29018. 229 This driver will provide the measurements of ambient light intensity 230 in lux, proximity infrared sensing and normal infrared sensing. 231 Data from sensor is accessible via sysfs. 232 233config SENSORS_ISL29028 234 tristate "Intersil ISL29028 Concurrent Light and Proximity Sensor" 235 depends on I2C 236 select REGMAP_I2C 237 help 238 Provides driver for the Intersil's ISL29028 device. 239 This driver supports the sysfs interface to get the ALS, IR intensity, 240 Proximity value via iio. The ISL29028 provides the concurrent sensing 241 of ambient light and proximity. 242 243config ISL29125 244 tristate "Intersil ISL29125 digital color light sensor" 245 depends on I2C 246 select IIO_BUFFER 247 select IIO_TRIGGERED_BUFFER 248 help 249 Say Y here if you want to build a driver for the Intersil ISL29125 250 RGB light sensor for I2C. 251 252 To compile this driver as a module, choose M here: the module will be 253 called isl29125. 254 255config HID_SENSOR_ALS 256 depends on HID_SENSOR_HUB 257 select IIO_BUFFER 258 select HID_SENSOR_IIO_COMMON 259 select HID_SENSOR_IIO_TRIGGER 260 tristate "HID ALS" 261 help 262 Say yes here to build support for the HID SENSOR 263 Ambient light sensor. 264 265 To compile this driver as a module, choose M here: the 266 module will be called hid-sensor-als. 267 268config HID_SENSOR_PROX 269 depends on HID_SENSOR_HUB 270 select IIO_BUFFER 271 select HID_SENSOR_IIO_COMMON 272 select HID_SENSOR_IIO_TRIGGER 273 tristate "HID PROX" 274 help 275 Say yes here to build support for the HID SENSOR 276 Proximity sensor. 277 278 To compile this driver as a module, choose M here: the 279 module will be called hid-sensor-prox. 280 281config JSA1212 282 tristate "JSA1212 ALS and proximity sensor driver" 283 depends on I2C 284 select REGMAP_I2C 285 help 286 Say Y here if you want to build a IIO driver for JSA1212 287 proximity & ALS sensor device. 288 289 To compile this driver as a module, choose M here: 290 the module will be called jsa1212. 291 292config ROHM_BU27008 293 tristate "ROHM BU27008 color (RGB+C/IR) sensor" 294 depends on I2C 295 select REGMAP_I2C 296 select IIO_GTS_HELPER 297 select IIO_BUFFER 298 select IIO_TRIGGERED_BUFFER 299 help 300 Enable support for the ROHM BU27008 color sensor. 301 The ROHM BU27008 is a sensor with 5 photodiodes (red, green, 302 blue, clear and IR) with four configurable channels. Red and 303 green being always available and two out of the rest three 304 (blue, clear, IR) can be selected to be simultaneously measured. 305 Typical application is adjusting LCD backlight of TVs, 306 mobile phones and tablet PCs. 307 308config ROHM_BU27034 309 tristate "ROHM BU27034 ambient light sensor" 310 depends on I2C 311 select REGMAP_I2C 312 select IIO_GTS_HELPER 313 select IIO_BUFFER 314 select IIO_KFIFO_BUF 315 help 316 Enable support for the ROHM BU27034 ambient light sensor. ROHM BU27034 317 is an ambient light sesnor with 3 channels and 3 photo diodes capable 318 of detecting a very wide range of illuminance. 319 Typical application is adjusting LCD and backlight power of TVs and 320 mobile phones. 321 322config RPR0521 323 tristate "ROHM RPR0521 ALS and proximity sensor driver" 324 depends on I2C 325 select REGMAP_I2C 326 select IIO_BUFFER 327 select IIO_TRIGGERED_BUFFER 328 help 329 Say Y here if you want to build support for ROHM's RPR0521 330 ambient light and proximity sensor device. 331 332 To compile this driver as a module, choose M here: 333 the module will be called rpr0521. 334 335config SENSORS_LM3533 336 tristate "LM3533 ambient light sensor" 337 depends on MFD_LM3533 338 help 339 If you say yes here you get support for the ambient light sensor 340 interface on National Semiconductor / TI LM3533 Lighting Power 341 chips. 342 343 The sensor interface can be used to control the LEDs and backlights 344 of the chip through defining five light zones and three sets of 345 corresponding output-current values. 346 347 The driver provides raw and mean adc readings along with the current 348 light zone through sysfs. A threshold event can be generated on zone 349 changes. The ALS-control output values can be set per zone for the 350 three current output channels. 351 352config LTR501 353 tristate "LTR-501ALS-01 light sensor" 354 depends on I2C 355 select REGMAP_I2C 356 select IIO_BUFFER 357 select IIO_TRIGGERED_BUFFER 358 help 359 If you say yes here you get support for the Lite-On LTR-501ALS-01 360 ambient light and proximity sensor. This driver also supports LTR-559 361 ALS/PS or LTR-301 ALS sensors. 362 363 This driver can also be built as a module. If so, the module 364 will be called ltr501. 365 366config LTRF216A 367 tristate "Liteon LTRF216A Light Sensor" 368 depends on I2C 369 select REGMAP_I2C 370 help 371 If you say Y or M here, you get support for Liteon LTRF216A 372 Ambient Light Sensor. 373 374 If built as a dynamically linked module, it will be called 375 ltrf216a. 376 377config LV0104CS 378 tristate "LV0104CS Ambient Light Sensor" 379 depends on I2C 380 help 381 Say Y here if you want to build support for the On Semiconductor 382 LV0104CS ambient light sensor. 383 384 To compile this driver as a module, choose M here: 385 the module will be called lv0104cs. 386 387config MAX44000 388 tristate "MAX44000 Ambient and Infrared Proximity Sensor" 389 depends on I2C 390 select REGMAP_I2C 391 select IIO_BUFFER 392 select IIO_TRIGGERED_BUFFER 393 help 394 Say Y here if you want to build support for Maxim Integrated's 395 MAX44000 ambient and infrared proximity sensor device. 396 397 To compile this driver as a module, choose M here: 398 the module will be called max44000. 399 400config MAX44009 401 tristate "MAX44009 Ambient Light Sensor" 402 depends on I2C 403 select REGMAP_I2C 404 help 405 Say Y here if you want to build support for Maxim Integrated's 406 MAX44009 ambient light sensor device. 407 408 To compile this driver as a module, choose M here: 409 the module will be called max44009. 410 411config NOA1305 412 tristate "ON Semiconductor NOA1305 ambient light sensor" 413 depends on I2C 414 select REGMAP_I2C 415 help 416 Say Y here if you want to build support for the ON Semiconductor 417 NOA1305 ambient light sensor. 418 419 To compile this driver as a module, choose M here: 420 The module will be called noa1305. 421 422config OPT3001 423 tristate "Texas Instruments OPT3001 Light Sensor" 424 depends on I2C 425 help 426 If you say Y or M here, you get support for Texas Instruments 427 OPT3001 Ambient Light Sensor. 428 429 If built as a dynamically linked module, it will be called 430 opt3001. 431 432config OPT4001 433 tristate "Texas Instruments OPT4001 Light Sensor" 434 depends on I2C 435 select REGMAP_I2C 436 help 437 If you say Y or M here, you get support for Texas Instruments 438 OPT4001 Ambient Light Sensor. 439 440 If built as a dynamically linked module, it will be called 441 opt4001. 442 443config PA12203001 444 tristate "TXC PA12203001 light and proximity sensor" 445 depends on I2C 446 select REGMAP_I2C 447 help 448 If you say yes here you get support for the TXC PA12203001 449 ambient light and proximity sensor. 450 451 This driver can also be built as a module. If so, the module 452 will be called pa12203001. 453 454config SI1133 455 tristate "SI1133 UV Index Sensor and Ambient Light Sensor" 456 depends on I2C 457 select REGMAP_I2C 458 help 459 Say Y here if you want to build a driver for the Silicon Labs SI1133 460 UV Index Sensor and Ambient Light Sensor chip. 461 462 To compile this driver as a module, choose M here: the module will be 463 called si1133. 464 465config SI1145 466 tristate "SI1132 and SI1141/2/3/5/6/7 combined ALS, UV index and proximity sensor" 467 depends on I2C 468 select IIO_BUFFER 469 select IIO_TRIGGERED_BUFFER 470 help 471 Say Y here if you want to build a driver for the Silicon Labs SI1132 or 472 SI1141/2/3/5/6/7 combined ambient light, UV index and proximity sensor 473 chips. 474 475 To compile this driver as a module, choose M here: the module will be 476 called si1145. 477 478config STK3310 479 tristate "STK3310 ALS and proximity sensor" 480 depends on I2C 481 select REGMAP_I2C 482 help 483 Say yes here to get support for the Sensortek STK3310 ambient light 484 and proximity sensor. The STK3311 model is also supported by this 485 driver. 486 487 Choosing M will build the driver as a module. If so, the module 488 will be called stk3310. 489 490config ST_UVIS25 491 tristate "STMicroelectronics UVIS25 sensor driver" 492 depends on (I2C || SPI) 493 select IIO_BUFFER 494 select IIO_TRIGGERED_BUFFER 495 select ST_UVIS25_I2C if (I2C) 496 select ST_UVIS25_SPI if (SPI_MASTER) 497 help 498 Say yes here to build support for STMicroelectronics UVIS25 499 uv sensor 500 501 To compile this driver as a module, choose M here: the module 502 will be called st_uvis25. 503 504config ST_UVIS25_I2C 505 tristate 506 depends on ST_UVIS25 507 select REGMAP_I2C 508 509config ST_UVIS25_SPI 510 tristate 511 depends on ST_UVIS25 512 select REGMAP_SPI 513 514config TCS3414 515 tristate "TAOS TCS3414 digital color sensor" 516 depends on I2C 517 select IIO_BUFFER 518 select IIO_TRIGGERED_BUFFER 519 help 520 If you say yes here you get support for the TAOS TCS3414 521 family of digital color sensors. 522 523 This driver can also be built as a module. If so, the module 524 will be called tcs3414. 525 526config TCS3472 527 tristate "TAOS TCS3472 color light-to-digital converter" 528 depends on I2C 529 select IIO_BUFFER 530 select IIO_TRIGGERED_BUFFER 531 help 532 If you say yes here you get support for the TAOS TCS3472 533 family of color light-to-digital converters with IR filter. 534 535 This driver can also be built as a module. If so, the module 536 will be called tcs3472. 537 538config SENSORS_TSL2563 539 tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors" 540 depends on I2C 541 help 542 If you say yes here you get support for the Taos TSL2560, 543 TSL2561, TSL2562 and TSL2563 ambient light sensors. 544 545 This driver can also be built as a module. If so, the module 546 will be called tsl2563. 547 548config TSL2583 549 tristate "TAOS TSL2580, TSL2581 and TSL2583 light-to-digital converters" 550 depends on I2C 551 help 552 Provides support for the TAOS tsl2580, tsl2581 and tsl2583 devices. 553 Access ALS data via iio, sysfs. 554 555config TSL2591 556 tristate "TAOS TSL2591 ambient light sensor" 557 depends on I2C 558 help 559 Select Y here for support of the AMS/TAOS TSL2591 ambient light sensor, 560 featuring channels for combined visible + IR intensity and lux illuminance. 561 Access data via iio and sysfs. Supports iio_events. 562 563 To compile this driver as a module, select M: the 564 module will be called tsl2591. 565 566config TSL2772 567 tristate "TAOS TSL/TMD2x71 and TSL/TMD2x72 Family of light and proximity sensors" 568 depends on I2C 569 help 570 Support for: tsl2571, tsl2671, tmd2671, tsl2771, tmd2771, tsl2572, tsl2672, 571 tmd2672, tsl2772, tmd2772 devices. 572 Provides iio_events and direct access via sysfs. 573 574config TSL4531 575 tristate "TAOS TSL4531 ambient light sensors" 576 depends on I2C 577 help 578 Say Y here if you want to build a driver for the TAOS TSL4531 family 579 of ambient light sensors with direct lux output. 580 581 To compile this driver as a module, choose M here: the 582 module will be called tsl4531. 583 584config US5182D 585 tristate "UPISEMI light and proximity sensor" 586 depends on I2C 587 help 588 If you say yes here you get support for the UPISEMI US5182D 589 ambient light and proximity sensor. 590 591 This driver can also be built as a module. If so, the module 592 will be called us5182d. 593 594config VCNL4000 595 tristate "VCNL4000/4010/4020/4200 combined ALS and proximity sensor" 596 select IIO_BUFFER 597 select IIO_TRIGGERED_BUFFER 598 depends on I2C 599 help 600 Say Y here if you want to build a driver for the Vishay VCNL4000, 601 VCNL4010, VCNL4020, VCNL4200 combined ambient light and proximity 602 sensor. 603 604 To compile this driver as a module, choose M here: the 605 module will be called vcnl4000. 606 607config VCNL4035 608 tristate "VCNL4035 combined ALS and proximity sensor" 609 select IIO_BUFFER 610 select IIO_TRIGGERED_BUFFER 611 select REGMAP_I2C 612 depends on I2C 613 help 614 Say Y here if you want to build a driver for the Vishay VCNL4035, 615 combined ambient light (ALS) and proximity sensor. Currently only ALS 616 function is available. 617 618 To compile this driver as a module, choose M here: the 619 module will be called vcnl4035. 620 621config VEML6030 622 tristate "VEML6030 ambient light sensor" 623 select REGMAP_I2C 624 depends on I2C 625 help 626 Say Y here if you want to build a driver for the Vishay VEML6030 627 ambient light sensor (ALS). 628 629 To compile this driver as a module, choose M here: the 630 module will be called veml6030. 631 632config VEML6070 633 tristate "VEML6070 UV A light sensor" 634 depends on I2C 635 help 636 Say Y here if you want to build a driver for the Vishay VEML6070 UV A 637 light sensor. 638 639 To compile this driver as a module, choose M here: the 640 module will be called veml6070. 641 642config VL6180 643 tristate "VL6180 ALS, range and proximity sensor" 644 depends on I2C 645 help 646 Say Y here if you want to build a driver for the STMicroelectronics 647 VL6180 combined ambient light, range and proximity sensor. 648 649 To compile this driver as a module, choose M here: the 650 module will be called vl6180. 651 652config ZOPT2201 653 tristate "ZOPT2201 ALS and UV B sensor" 654 depends on I2C 655 help 656 Say Y here if you want to build a driver for the IDT 657 ZOPT2201 ambient light and UV B sensor. 658 659 To compile this driver as a module, choose M here: the 660 module will be called zopt2201. 661 662endmenu 663