xref: /openbmc/linux/drivers/iio/adc/ti-ads7950.c (revision 791d3ef2)
1 /*
2  * Texas Instruments ADS7950 SPI ADC driver
3  *
4  * Copyright 2016 David Lechner <david@lechnology.com>
5  *
6  * Based on iio/ad7923.c:
7  * Copyright 2011 Analog Devices Inc
8  * Copyright 2012 CS Systemes d'Information
9  *
10  * And also on hwmon/ads79xx.c
11  * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
12  *	Nishanth Menon
13  *
14  * This program is free software; you can redistribute it and/or
15  * modify it under the terms of the GNU General Public License as
16  * published by the Free Software Foundation version 2.
17  *
18  * This program is distributed "as is" WITHOUT ANY WARRANTY of any
19  * kind, whether express or implied; without even the implied warranty
20  * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
21  * GNU General Public License for more details.
22  */
23 
24 #include <linux/acpi.h>
25 #include <linux/bitops.h>
26 #include <linux/device.h>
27 #include <linux/err.h>
28 #include <linux/interrupt.h>
29 #include <linux/kernel.h>
30 #include <linux/module.h>
31 #include <linux/regulator/consumer.h>
32 #include <linux/slab.h>
33 #include <linux/spi/spi.h>
34 
35 #include <linux/iio/buffer.h>
36 #include <linux/iio/iio.h>
37 #include <linux/iio/sysfs.h>
38 #include <linux/iio/trigger_consumer.h>
39 #include <linux/iio/triggered_buffer.h>
40 
41 /*
42  * In case of ACPI, we use the 5000 mV as default for the reference pin.
43  * Device tree users encode that via the vref-supply regulator.
44  */
45 #define TI_ADS7950_VA_MV_ACPI_DEFAULT	5000
46 
47 #define TI_ADS7950_CR_MANUAL	BIT(12)
48 #define TI_ADS7950_CR_WRITE	BIT(11)
49 #define TI_ADS7950_CR_CHAN(ch)	((ch) << 7)
50 #define TI_ADS7950_CR_RANGE_5V	BIT(6)
51 
52 #define TI_ADS7950_MAX_CHAN	16
53 
54 #define TI_ADS7950_TIMESTAMP_SIZE (sizeof(int64_t) / sizeof(__be16))
55 
56 /* val = value, dec = left shift, bits = number of bits of the mask */
57 #define TI_ADS7950_EXTRACT(val, dec, bits) \
58 	(((val) >> (dec)) & ((1 << (bits)) - 1))
59 
60 struct ti_ads7950_state {
61 	struct spi_device	*spi;
62 	struct spi_transfer	ring_xfer[TI_ADS7950_MAX_CHAN + 2];
63 	struct spi_transfer	scan_single_xfer[3];
64 	struct spi_message	ring_msg;
65 	struct spi_message	scan_single_msg;
66 
67 	struct regulator	*reg;
68 	unsigned int		vref_mv;
69 
70 	unsigned int		settings;
71 
72 	/*
73 	 * DMA (thus cache coherency maintenance) requires the
74 	 * transfer buffers to live in their own cache lines.
75 	 */
76 	__be16	rx_buf[TI_ADS7950_MAX_CHAN + TI_ADS7950_TIMESTAMP_SIZE]
77 							____cacheline_aligned;
78 	__be16	tx_buf[TI_ADS7950_MAX_CHAN];
79 };
80 
81 struct ti_ads7950_chip_info {
82 	const struct iio_chan_spec *channels;
83 	unsigned int num_channels;
84 };
85 
86 enum ti_ads7950_id {
87 	TI_ADS7950,
88 	TI_ADS7951,
89 	TI_ADS7952,
90 	TI_ADS7953,
91 	TI_ADS7954,
92 	TI_ADS7955,
93 	TI_ADS7956,
94 	TI_ADS7957,
95 	TI_ADS7958,
96 	TI_ADS7959,
97 	TI_ADS7960,
98 	TI_ADS7961,
99 };
100 
101 #define TI_ADS7950_V_CHAN(index, bits)				\
102 {								\
103 	.type = IIO_VOLTAGE,					\
104 	.indexed = 1,						\
105 	.channel = index,					\
106 	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
107 	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
108 	.address = index,					\
109 	.datasheet_name = "CH##index",				\
110 	.scan_index = index,					\
111 	.scan_type = {						\
112 		.sign = 'u',					\
113 		.realbits = bits,				\
114 		.storagebits = 16,				\
115 		.shift = 12 - (bits),				\
116 		.endianness = IIO_BE,				\
117 	},							\
118 }
119 
120 #define DECLARE_TI_ADS7950_4_CHANNELS(name, bits) \
121 const struct iio_chan_spec name ## _channels[] = { \
122 	TI_ADS7950_V_CHAN(0, bits), \
123 	TI_ADS7950_V_CHAN(1, bits), \
124 	TI_ADS7950_V_CHAN(2, bits), \
125 	TI_ADS7950_V_CHAN(3, bits), \
126 	IIO_CHAN_SOFT_TIMESTAMP(4), \
127 }
128 
129 #define DECLARE_TI_ADS7950_8_CHANNELS(name, bits) \
130 const struct iio_chan_spec name ## _channels[] = { \
131 	TI_ADS7950_V_CHAN(0, bits), \
132 	TI_ADS7950_V_CHAN(1, bits), \
133 	TI_ADS7950_V_CHAN(2, bits), \
134 	TI_ADS7950_V_CHAN(3, bits), \
135 	TI_ADS7950_V_CHAN(4, bits), \
136 	TI_ADS7950_V_CHAN(5, bits), \
137 	TI_ADS7950_V_CHAN(6, bits), \
138 	TI_ADS7950_V_CHAN(7, bits), \
139 	IIO_CHAN_SOFT_TIMESTAMP(8), \
140 }
141 
142 #define DECLARE_TI_ADS7950_12_CHANNELS(name, bits) \
143 const struct iio_chan_spec name ## _channels[] = { \
144 	TI_ADS7950_V_CHAN(0, bits), \
145 	TI_ADS7950_V_CHAN(1, bits), \
146 	TI_ADS7950_V_CHAN(2, bits), \
147 	TI_ADS7950_V_CHAN(3, bits), \
148 	TI_ADS7950_V_CHAN(4, bits), \
149 	TI_ADS7950_V_CHAN(5, bits), \
150 	TI_ADS7950_V_CHAN(6, bits), \
151 	TI_ADS7950_V_CHAN(7, bits), \
152 	TI_ADS7950_V_CHAN(8, bits), \
153 	TI_ADS7950_V_CHAN(9, bits), \
154 	TI_ADS7950_V_CHAN(10, bits), \
155 	TI_ADS7950_V_CHAN(11, bits), \
156 	IIO_CHAN_SOFT_TIMESTAMP(12), \
157 }
158 
159 #define DECLARE_TI_ADS7950_16_CHANNELS(name, bits) \
160 const struct iio_chan_spec name ## _channels[] = { \
161 	TI_ADS7950_V_CHAN(0, bits), \
162 	TI_ADS7950_V_CHAN(1, bits), \
163 	TI_ADS7950_V_CHAN(2, bits), \
164 	TI_ADS7950_V_CHAN(3, bits), \
165 	TI_ADS7950_V_CHAN(4, bits), \
166 	TI_ADS7950_V_CHAN(5, bits), \
167 	TI_ADS7950_V_CHAN(6, bits), \
168 	TI_ADS7950_V_CHAN(7, bits), \
169 	TI_ADS7950_V_CHAN(8, bits), \
170 	TI_ADS7950_V_CHAN(9, bits), \
171 	TI_ADS7950_V_CHAN(10, bits), \
172 	TI_ADS7950_V_CHAN(11, bits), \
173 	TI_ADS7950_V_CHAN(12, bits), \
174 	TI_ADS7950_V_CHAN(13, bits), \
175 	TI_ADS7950_V_CHAN(14, bits), \
176 	TI_ADS7950_V_CHAN(15, bits), \
177 	IIO_CHAN_SOFT_TIMESTAMP(16), \
178 }
179 
180 static DECLARE_TI_ADS7950_4_CHANNELS(ti_ads7950, 12);
181 static DECLARE_TI_ADS7950_8_CHANNELS(ti_ads7951, 12);
182 static DECLARE_TI_ADS7950_12_CHANNELS(ti_ads7952, 12);
183 static DECLARE_TI_ADS7950_16_CHANNELS(ti_ads7953, 12);
184 static DECLARE_TI_ADS7950_4_CHANNELS(ti_ads7954, 10);
185 static DECLARE_TI_ADS7950_8_CHANNELS(ti_ads7955, 10);
186 static DECLARE_TI_ADS7950_12_CHANNELS(ti_ads7956, 10);
187 static DECLARE_TI_ADS7950_16_CHANNELS(ti_ads7957, 10);
188 static DECLARE_TI_ADS7950_4_CHANNELS(ti_ads7958, 8);
189 static DECLARE_TI_ADS7950_8_CHANNELS(ti_ads7959, 8);
190 static DECLARE_TI_ADS7950_12_CHANNELS(ti_ads7960, 8);
191 static DECLARE_TI_ADS7950_16_CHANNELS(ti_ads7961, 8);
192 
193 static const struct ti_ads7950_chip_info ti_ads7950_chip_info[] = {
194 	[TI_ADS7950] = {
195 		.channels	= ti_ads7950_channels,
196 		.num_channels	= ARRAY_SIZE(ti_ads7950_channels),
197 	},
198 	[TI_ADS7951] = {
199 		.channels	= ti_ads7951_channels,
200 		.num_channels	= ARRAY_SIZE(ti_ads7951_channels),
201 	},
202 	[TI_ADS7952] = {
203 		.channels	= ti_ads7952_channels,
204 		.num_channels	= ARRAY_SIZE(ti_ads7952_channels),
205 	},
206 	[TI_ADS7953] = {
207 		.channels	= ti_ads7953_channels,
208 		.num_channels	= ARRAY_SIZE(ti_ads7953_channels),
209 	},
210 	[TI_ADS7954] = {
211 		.channels	= ti_ads7954_channels,
212 		.num_channels	= ARRAY_SIZE(ti_ads7954_channels),
213 	},
214 	[TI_ADS7955] = {
215 		.channels	= ti_ads7955_channels,
216 		.num_channels	= ARRAY_SIZE(ti_ads7955_channels),
217 	},
218 	[TI_ADS7956] = {
219 		.channels	= ti_ads7956_channels,
220 		.num_channels	= ARRAY_SIZE(ti_ads7956_channels),
221 	},
222 	[TI_ADS7957] = {
223 		.channels	= ti_ads7957_channels,
224 		.num_channels	= ARRAY_SIZE(ti_ads7957_channels),
225 	},
226 	[TI_ADS7958] = {
227 		.channels	= ti_ads7958_channels,
228 		.num_channels	= ARRAY_SIZE(ti_ads7958_channels),
229 	},
230 	[TI_ADS7959] = {
231 		.channels	= ti_ads7959_channels,
232 		.num_channels	= ARRAY_SIZE(ti_ads7959_channels),
233 	},
234 	[TI_ADS7960] = {
235 		.channels	= ti_ads7960_channels,
236 		.num_channels	= ARRAY_SIZE(ti_ads7960_channels),
237 	},
238 	[TI_ADS7961] = {
239 		.channels	= ti_ads7961_channels,
240 		.num_channels	= ARRAY_SIZE(ti_ads7961_channels),
241 	},
242 };
243 
244 /*
245  * ti_ads7950_update_scan_mode() setup the spi transfer buffer for the new
246  * scan mask
247  */
248 static int ti_ads7950_update_scan_mode(struct iio_dev *indio_dev,
249 				       const unsigned long *active_scan_mask)
250 {
251 	struct ti_ads7950_state *st = iio_priv(indio_dev);
252 	int i, cmd, len;
253 
254 	len = 0;
255 	for_each_set_bit(i, active_scan_mask, indio_dev->num_channels) {
256 		cmd = TI_ADS7950_CR_WRITE | TI_ADS7950_CR_CHAN(i) | st->settings;
257 		st->tx_buf[len++] = cpu_to_be16(cmd);
258 	}
259 
260 	/* Data for the 1st channel is not returned until the 3rd transfer */
261 	len += 2;
262 	for (i = 0; i < len; i++) {
263 		if ((i + 2) < len)
264 			st->ring_xfer[i].tx_buf = &st->tx_buf[i];
265 		if (i >= 2)
266 			st->ring_xfer[i].rx_buf = &st->rx_buf[i - 2];
267 		st->ring_xfer[i].len = 2;
268 		st->ring_xfer[i].cs_change = 1;
269 	}
270 	/* make sure last transfer's cs_change is not set */
271 	st->ring_xfer[len - 1].cs_change = 0;
272 
273 	spi_message_init_with_transfers(&st->ring_msg, st->ring_xfer, len);
274 
275 	return 0;
276 }
277 
278 static irqreturn_t ti_ads7950_trigger_handler(int irq, void *p)
279 {
280 	struct iio_poll_func *pf = p;
281 	struct iio_dev *indio_dev = pf->indio_dev;
282 	struct ti_ads7950_state *st = iio_priv(indio_dev);
283 	int ret;
284 
285 	ret = spi_sync(st->spi, &st->ring_msg);
286 	if (ret < 0)
287 		goto out;
288 
289 	iio_push_to_buffers_with_timestamp(indio_dev, st->rx_buf,
290 					   iio_get_time_ns(indio_dev));
291 
292 out:
293 	iio_trigger_notify_done(indio_dev->trig);
294 
295 	return IRQ_HANDLED;
296 }
297 
298 static int ti_ads7950_scan_direct(struct ti_ads7950_state *st, unsigned int ch)
299 {
300 	int ret, cmd;
301 
302 	cmd = TI_ADS7950_CR_WRITE | TI_ADS7950_CR_CHAN(ch) | st->settings;
303 	st->tx_buf[0] = cpu_to_be16(cmd);
304 
305 	ret = spi_sync(st->spi, &st->scan_single_msg);
306 	if (ret)
307 		return ret;
308 
309 	return be16_to_cpu(st->rx_buf[0]);
310 }
311 
312 static int ti_ads7950_get_range(struct ti_ads7950_state *st)
313 {
314 	int vref;
315 
316 	if (st->vref_mv) {
317 		vref = st->vref_mv;
318 	} else {
319 		vref = regulator_get_voltage(st->reg);
320 		if (vref < 0)
321 			return vref;
322 
323 		vref /= 1000;
324 	}
325 
326 	if (st->settings & TI_ADS7950_CR_RANGE_5V)
327 		vref *= 2;
328 
329 	return vref;
330 }
331 
332 static int ti_ads7950_read_raw(struct iio_dev *indio_dev,
333 			       struct iio_chan_spec const *chan,
334 			       int *val, int *val2, long m)
335 {
336 	struct ti_ads7950_state *st = iio_priv(indio_dev);
337 	int ret;
338 
339 	switch (m) {
340 	case IIO_CHAN_INFO_RAW:
341 
342 		ret = iio_device_claim_direct_mode(indio_dev);
343 		if (ret < 0)
344 			return ret;
345 
346 		ret = ti_ads7950_scan_direct(st, chan->address);
347 		iio_device_release_direct_mode(indio_dev);
348 		if (ret < 0)
349 			return ret;
350 
351 		if (chan->address != TI_ADS7950_EXTRACT(ret, 12, 4))
352 			return -EIO;
353 
354 		*val = TI_ADS7950_EXTRACT(ret, chan->scan_type.shift,
355 					  chan->scan_type.realbits);
356 
357 		return IIO_VAL_INT;
358 	case IIO_CHAN_INFO_SCALE:
359 		ret = ti_ads7950_get_range(st);
360 		if (ret < 0)
361 			return ret;
362 
363 		*val = ret;
364 		*val2 = (1 << chan->scan_type.realbits) - 1;
365 
366 		return IIO_VAL_FRACTIONAL;
367 	}
368 
369 	return -EINVAL;
370 }
371 
372 static const struct iio_info ti_ads7950_info = {
373 	.read_raw		= &ti_ads7950_read_raw,
374 	.update_scan_mode	= ti_ads7950_update_scan_mode,
375 };
376 
377 static int ti_ads7950_probe(struct spi_device *spi)
378 {
379 	struct ti_ads7950_state *st;
380 	struct iio_dev *indio_dev;
381 	const struct ti_ads7950_chip_info *info;
382 	int ret;
383 
384 	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
385 	if (!indio_dev)
386 		return -ENOMEM;
387 
388 	st = iio_priv(indio_dev);
389 
390 	spi_set_drvdata(spi, indio_dev);
391 
392 	st->spi = spi;
393 	st->settings = TI_ADS7950_CR_MANUAL | TI_ADS7950_CR_RANGE_5V;
394 
395 	info = &ti_ads7950_chip_info[spi_get_device_id(spi)->driver_data];
396 
397 	indio_dev->name = spi_get_device_id(spi)->name;
398 	indio_dev->dev.parent = &spi->dev;
399 	indio_dev->modes = INDIO_DIRECT_MODE;
400 	indio_dev->channels = info->channels;
401 	indio_dev->num_channels = info->num_channels;
402 	indio_dev->info = &ti_ads7950_info;
403 
404 	/*
405 	 * Setup default message. The sample is read at the end of the first
406 	 * transfer, then it takes one full cycle to convert the sample and one
407 	 * more cycle to send the value. The conversion process is driven by
408 	 * the SPI clock, which is why we have 3 transfers. The middle one is
409 	 * just dummy data sent while the chip is converting the sample that
410 	 * was read at the end of the first transfer.
411 	 */
412 
413 	st->scan_single_xfer[0].tx_buf = &st->tx_buf[0];
414 	st->scan_single_xfer[0].len = 2;
415 	st->scan_single_xfer[0].cs_change = 1;
416 	st->scan_single_xfer[1].tx_buf = &st->tx_buf[0];
417 	st->scan_single_xfer[1].len = 2;
418 	st->scan_single_xfer[1].cs_change = 1;
419 	st->scan_single_xfer[2].rx_buf = &st->rx_buf[0];
420 	st->scan_single_xfer[2].len = 2;
421 
422 	spi_message_init_with_transfers(&st->scan_single_msg,
423 					st->scan_single_xfer, 3);
424 
425 	/* Use hard coded value for reference voltage in ACPI case */
426 	if (ACPI_COMPANION(&spi->dev))
427 		st->vref_mv = TI_ADS7950_VA_MV_ACPI_DEFAULT;
428 
429 	st->reg = devm_regulator_get(&spi->dev, "vref");
430 	if (IS_ERR(st->reg)) {
431 		dev_err(&spi->dev, "Failed get get regulator \"vref\"\n");
432 		return PTR_ERR(st->reg);
433 	}
434 
435 	ret = regulator_enable(st->reg);
436 	if (ret) {
437 		dev_err(&spi->dev, "Failed to enable regulator \"vref\"\n");
438 		return ret;
439 	}
440 
441 	ret = iio_triggered_buffer_setup(indio_dev, NULL,
442 					 &ti_ads7950_trigger_handler, NULL);
443 	if (ret) {
444 		dev_err(&spi->dev, "Failed to setup triggered buffer\n");
445 		goto error_disable_reg;
446 	}
447 
448 	ret = iio_device_register(indio_dev);
449 	if (ret) {
450 		dev_err(&spi->dev, "Failed to register iio device\n");
451 		goto error_cleanup_ring;
452 	}
453 
454 	return 0;
455 
456 error_cleanup_ring:
457 	iio_triggered_buffer_cleanup(indio_dev);
458 error_disable_reg:
459 	regulator_disable(st->reg);
460 
461 	return ret;
462 }
463 
464 static int ti_ads7950_remove(struct spi_device *spi)
465 {
466 	struct iio_dev *indio_dev = spi_get_drvdata(spi);
467 	struct ti_ads7950_state *st = iio_priv(indio_dev);
468 
469 	iio_device_unregister(indio_dev);
470 	iio_triggered_buffer_cleanup(indio_dev);
471 	regulator_disable(st->reg);
472 
473 	return 0;
474 }
475 
476 static const struct spi_device_id ti_ads7950_id[] = {
477 	{ "ads7950", TI_ADS7950 },
478 	{ "ads7951", TI_ADS7951 },
479 	{ "ads7952", TI_ADS7952 },
480 	{ "ads7953", TI_ADS7953 },
481 	{ "ads7954", TI_ADS7954 },
482 	{ "ads7955", TI_ADS7955 },
483 	{ "ads7956", TI_ADS7956 },
484 	{ "ads7957", TI_ADS7957 },
485 	{ "ads7958", TI_ADS7958 },
486 	{ "ads7959", TI_ADS7959 },
487 	{ "ads7960", TI_ADS7960 },
488 	{ "ads7961", TI_ADS7961 },
489 	{ }
490 };
491 MODULE_DEVICE_TABLE(spi, ti_ads7950_id);
492 
493 static const struct of_device_id ads7950_of_table[] = {
494 	{ .compatible = "ti,ads7950", .data = &ti_ads7950_chip_info[TI_ADS7950] },
495 	{ .compatible = "ti,ads7951", .data = &ti_ads7950_chip_info[TI_ADS7951] },
496 	{ .compatible = "ti,ads7952", .data = &ti_ads7950_chip_info[TI_ADS7952] },
497 	{ .compatible = "ti,ads7953", .data = &ti_ads7950_chip_info[TI_ADS7953] },
498 	{ .compatible = "ti,ads7954", .data = &ti_ads7950_chip_info[TI_ADS7954] },
499 	{ .compatible = "ti,ads7955", .data = &ti_ads7950_chip_info[TI_ADS7955] },
500 	{ .compatible = "ti,ads7956", .data = &ti_ads7950_chip_info[TI_ADS7956] },
501 	{ .compatible = "ti,ads7957", .data = &ti_ads7950_chip_info[TI_ADS7957] },
502 	{ .compatible = "ti,ads7958", .data = &ti_ads7950_chip_info[TI_ADS7958] },
503 	{ .compatible = "ti,ads7959", .data = &ti_ads7950_chip_info[TI_ADS7959] },
504 	{ .compatible = "ti,ads7960", .data = &ti_ads7950_chip_info[TI_ADS7960] },
505 	{ .compatible = "ti,ads7961", .data = &ti_ads7950_chip_info[TI_ADS7961] },
506 	{ },
507 };
508 MODULE_DEVICE_TABLE(of, ads7950_of_table);
509 
510 static struct spi_driver ti_ads7950_driver = {
511 	.driver = {
512 		.name	= "ads7950",
513 		.of_match_table = ads7950_of_table,
514 	},
515 	.probe		= ti_ads7950_probe,
516 	.remove		= ti_ads7950_remove,
517 	.id_table	= ti_ads7950_id,
518 };
519 module_spi_driver(ti_ads7950_driver);
520 
521 MODULE_AUTHOR("David Lechner <david@lechnology.com>");
522 MODULE_DESCRIPTION("TI TI_ADS7950 ADC");
523 MODULE_LICENSE("GPL v2");
524