1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Xilinx Spartan6 and 7 Series Slave Serial SPI Driver 4 * 5 * Copyright (C) 2017 DENX Software Engineering 6 * 7 * Anatolij Gustschin <agust@denx.de> 8 * 9 * Manage Xilinx FPGA firmware that is loaded over SPI using 10 * the slave serial configuration interface. 11 */ 12 13 #include <linux/delay.h> 14 #include <linux/device.h> 15 #include <linux/fpga/fpga-mgr.h> 16 #include <linux/gpio/consumer.h> 17 #include <linux/module.h> 18 #include <linux/mod_devicetable.h> 19 #include <linux/of.h> 20 #include <linux/spi/spi.h> 21 #include <linux/sizes.h> 22 23 struct xilinx_spi_conf { 24 struct spi_device *spi; 25 struct gpio_desc *prog_b; 26 struct gpio_desc *init_b; 27 struct gpio_desc *done; 28 }; 29 30 static int get_done_gpio(struct fpga_manager *mgr) 31 { 32 struct xilinx_spi_conf *conf = mgr->priv; 33 int ret; 34 35 ret = gpiod_get_value(conf->done); 36 37 if (ret < 0) 38 dev_err(&mgr->dev, "Error reading DONE (%d)\n", ret); 39 40 return ret; 41 } 42 43 static enum fpga_mgr_states xilinx_spi_state(struct fpga_manager *mgr) 44 { 45 if (!get_done_gpio(mgr)) 46 return FPGA_MGR_STATE_RESET; 47 48 return FPGA_MGR_STATE_UNKNOWN; 49 } 50 51 /** 52 * wait_for_init_b - wait for the INIT_B pin to have a given state, or wait 53 * a given delay if the pin is unavailable 54 * 55 * @mgr: The FPGA manager object 56 * @value: Value INIT_B to wait for (1 = asserted = low) 57 * @alt_udelay: Delay to wait if the INIT_B GPIO is not available 58 * 59 * Returns 0 when the INIT_B GPIO reached the given state or -ETIMEDOUT if 60 * too much time passed waiting for that. If no INIT_B GPIO is available 61 * then always return 0. 62 */ 63 static int wait_for_init_b(struct fpga_manager *mgr, int value, 64 unsigned long alt_udelay) 65 { 66 struct xilinx_spi_conf *conf = mgr->priv; 67 unsigned long timeout = jiffies + msecs_to_jiffies(1000); 68 69 if (conf->init_b) { 70 while (time_before(jiffies, timeout)) { 71 int ret = gpiod_get_value(conf->init_b); 72 73 if (ret == value) 74 return 0; 75 76 if (ret < 0) { 77 dev_err(&mgr->dev, "Error reading INIT_B (%d)\n", ret); 78 return ret; 79 } 80 81 usleep_range(100, 400); 82 } 83 84 dev_err(&mgr->dev, "Timeout waiting for INIT_B to %s\n", 85 value ? "assert" : "deassert"); 86 return -ETIMEDOUT; 87 } 88 89 udelay(alt_udelay); 90 91 return 0; 92 } 93 94 static int xilinx_spi_write_init(struct fpga_manager *mgr, 95 struct fpga_image_info *info, 96 const char *buf, size_t count) 97 { 98 struct xilinx_spi_conf *conf = mgr->priv; 99 int err; 100 101 if (info->flags & FPGA_MGR_PARTIAL_RECONFIG) { 102 dev_err(&mgr->dev, "Partial reconfiguration not supported\n"); 103 return -EINVAL; 104 } 105 106 gpiod_set_value(conf->prog_b, 1); 107 108 err = wait_for_init_b(mgr, 1, 1); /* min is 500 ns */ 109 if (err) { 110 gpiod_set_value(conf->prog_b, 0); 111 return err; 112 } 113 114 gpiod_set_value(conf->prog_b, 0); 115 116 err = wait_for_init_b(mgr, 0, 0); 117 if (err) 118 return err; 119 120 if (get_done_gpio(mgr)) { 121 dev_err(&mgr->dev, "Unexpected DONE pin state...\n"); 122 return -EIO; 123 } 124 125 /* program latency */ 126 usleep_range(7500, 7600); 127 return 0; 128 } 129 130 static int xilinx_spi_write(struct fpga_manager *mgr, const char *buf, 131 size_t count) 132 { 133 struct xilinx_spi_conf *conf = mgr->priv; 134 const char *fw_data = buf; 135 const char *fw_data_end = fw_data + count; 136 137 while (fw_data < fw_data_end) { 138 size_t remaining, stride; 139 int ret; 140 141 remaining = fw_data_end - fw_data; 142 stride = min_t(size_t, remaining, SZ_4K); 143 144 ret = spi_write(conf->spi, fw_data, stride); 145 if (ret) { 146 dev_err(&mgr->dev, "SPI error in firmware write: %d\n", 147 ret); 148 return ret; 149 } 150 fw_data += stride; 151 } 152 153 return 0; 154 } 155 156 static int xilinx_spi_apply_cclk_cycles(struct xilinx_spi_conf *conf) 157 { 158 struct spi_device *spi = conf->spi; 159 const u8 din_data[1] = { 0xff }; 160 int ret; 161 162 ret = spi_write(conf->spi, din_data, sizeof(din_data)); 163 if (ret) 164 dev_err(&spi->dev, "applying CCLK cycles failed: %d\n", ret); 165 166 return ret; 167 } 168 169 static int xilinx_spi_write_complete(struct fpga_manager *mgr, 170 struct fpga_image_info *info) 171 { 172 struct xilinx_spi_conf *conf = mgr->priv; 173 unsigned long timeout = jiffies + usecs_to_jiffies(info->config_complete_timeout_us); 174 bool expired = false; 175 int done; 176 int ret; 177 178 /* 179 * This loop is carefully written such that if the driver is 180 * scheduled out for more than 'timeout', we still check for DONE 181 * before giving up and we apply 8 extra CCLK cycles in all cases. 182 */ 183 while (!expired) { 184 expired = time_after(jiffies, timeout); 185 186 done = get_done_gpio(mgr); 187 if (done < 0) 188 return done; 189 190 ret = xilinx_spi_apply_cclk_cycles(conf); 191 if (ret) 192 return ret; 193 194 if (done) 195 return 0; 196 } 197 198 if (conf->init_b) { 199 ret = gpiod_get_value(conf->init_b); 200 201 if (ret < 0) { 202 dev_err(&mgr->dev, "Error reading INIT_B (%d)\n", ret); 203 return ret; 204 } 205 206 dev_err(&mgr->dev, 207 ret ? "CRC error or invalid device\n" 208 : "Missing sync word or incomplete bitstream\n"); 209 } else { 210 dev_err(&mgr->dev, "Timeout after config data transfer\n"); 211 } 212 213 return -ETIMEDOUT; 214 } 215 216 static const struct fpga_manager_ops xilinx_spi_ops = { 217 .state = xilinx_spi_state, 218 .write_init = xilinx_spi_write_init, 219 .write = xilinx_spi_write, 220 .write_complete = xilinx_spi_write_complete, 221 }; 222 223 static int xilinx_spi_probe(struct spi_device *spi) 224 { 225 struct xilinx_spi_conf *conf; 226 struct fpga_manager *mgr; 227 228 conf = devm_kzalloc(&spi->dev, sizeof(*conf), GFP_KERNEL); 229 if (!conf) 230 return -ENOMEM; 231 232 conf->spi = spi; 233 234 /* PROGRAM_B is active low */ 235 conf->prog_b = devm_gpiod_get(&spi->dev, "prog_b", GPIOD_OUT_LOW); 236 if (IS_ERR(conf->prog_b)) 237 return dev_err_probe(&spi->dev, PTR_ERR(conf->prog_b), 238 "Failed to get PROGRAM_B gpio\n"); 239 240 conf->init_b = devm_gpiod_get_optional(&spi->dev, "init-b", GPIOD_IN); 241 if (IS_ERR(conf->init_b)) 242 return dev_err_probe(&spi->dev, PTR_ERR(conf->init_b), 243 "Failed to get INIT_B gpio\n"); 244 245 conf->done = devm_gpiod_get(&spi->dev, "done", GPIOD_IN); 246 if (IS_ERR(conf->done)) 247 return dev_err_probe(&spi->dev, PTR_ERR(conf->done), 248 "Failed to get DONE gpio\n"); 249 250 mgr = devm_fpga_mgr_create(&spi->dev, 251 "Xilinx Slave Serial FPGA Manager", 252 &xilinx_spi_ops, conf); 253 if (!mgr) 254 return -ENOMEM; 255 256 return devm_fpga_mgr_register(&spi->dev, mgr); 257 } 258 259 static const struct of_device_id xlnx_spi_of_match[] = { 260 { .compatible = "xlnx,fpga-slave-serial", }, 261 {} 262 }; 263 MODULE_DEVICE_TABLE(of, xlnx_spi_of_match); 264 265 static struct spi_driver xilinx_slave_spi_driver = { 266 .driver = { 267 .name = "xlnx-slave-spi", 268 .of_match_table = of_match_ptr(xlnx_spi_of_match), 269 }, 270 .probe = xilinx_spi_probe, 271 }; 272 273 module_spi_driver(xilinx_slave_spi_driver) 274 275 MODULE_LICENSE("GPL v2"); 276 MODULE_AUTHOR("Anatolij Gustschin <agust@denx.de>"); 277 MODULE_DESCRIPTION("Load Xilinx FPGA firmware over SPI"); 278