1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Xilinx Spartan6 and 7 Series Slave Serial SPI Driver
4 *
5 * Copyright (C) 2017 DENX Software Engineering
6 *
7 * Anatolij Gustschin <agust@denx.de>
8 *
9 * Manage Xilinx FPGA firmware that is loaded over SPI using
10 * the slave serial configuration interface.
11 */
12
13 #include <linux/delay.h>
14 #include <linux/device.h>
15 #include <linux/fpga/fpga-mgr.h>
16 #include <linux/gpio/consumer.h>
17 #include <linux/module.h>
18 #include <linux/mod_devicetable.h>
19 #include <linux/of.h>
20 #include <linux/spi/spi.h>
21 #include <linux/sizes.h>
22
23 struct xilinx_spi_conf {
24 struct spi_device *spi;
25 struct gpio_desc *prog_b;
26 struct gpio_desc *init_b;
27 struct gpio_desc *done;
28 };
29
get_done_gpio(struct fpga_manager * mgr)30 static int get_done_gpio(struct fpga_manager *mgr)
31 {
32 struct xilinx_spi_conf *conf = mgr->priv;
33 int ret;
34
35 ret = gpiod_get_value(conf->done);
36
37 if (ret < 0)
38 dev_err(&mgr->dev, "Error reading DONE (%d)\n", ret);
39
40 return ret;
41 }
42
xilinx_spi_state(struct fpga_manager * mgr)43 static enum fpga_mgr_states xilinx_spi_state(struct fpga_manager *mgr)
44 {
45 if (!get_done_gpio(mgr))
46 return FPGA_MGR_STATE_RESET;
47
48 return FPGA_MGR_STATE_UNKNOWN;
49 }
50
51 /**
52 * wait_for_init_b - wait for the INIT_B pin to have a given state, or wait
53 * a given delay if the pin is unavailable
54 *
55 * @mgr: The FPGA manager object
56 * @value: Value INIT_B to wait for (1 = asserted = low)
57 * @alt_udelay: Delay to wait if the INIT_B GPIO is not available
58 *
59 * Returns 0 when the INIT_B GPIO reached the given state or -ETIMEDOUT if
60 * too much time passed waiting for that. If no INIT_B GPIO is available
61 * then always return 0.
62 */
wait_for_init_b(struct fpga_manager * mgr,int value,unsigned long alt_udelay)63 static int wait_for_init_b(struct fpga_manager *mgr, int value,
64 unsigned long alt_udelay)
65 {
66 struct xilinx_spi_conf *conf = mgr->priv;
67 unsigned long timeout = jiffies + msecs_to_jiffies(1000);
68
69 if (conf->init_b) {
70 while (time_before(jiffies, timeout)) {
71 int ret = gpiod_get_value(conf->init_b);
72
73 if (ret == value)
74 return 0;
75
76 if (ret < 0) {
77 dev_err(&mgr->dev, "Error reading INIT_B (%d)\n", ret);
78 return ret;
79 }
80
81 usleep_range(100, 400);
82 }
83
84 dev_err(&mgr->dev, "Timeout waiting for INIT_B to %s\n",
85 value ? "assert" : "deassert");
86 return -ETIMEDOUT;
87 }
88
89 udelay(alt_udelay);
90
91 return 0;
92 }
93
xilinx_spi_write_init(struct fpga_manager * mgr,struct fpga_image_info * info,const char * buf,size_t count)94 static int xilinx_spi_write_init(struct fpga_manager *mgr,
95 struct fpga_image_info *info,
96 const char *buf, size_t count)
97 {
98 struct xilinx_spi_conf *conf = mgr->priv;
99 int err;
100
101 if (info->flags & FPGA_MGR_PARTIAL_RECONFIG) {
102 dev_err(&mgr->dev, "Partial reconfiguration not supported\n");
103 return -EINVAL;
104 }
105
106 gpiod_set_value(conf->prog_b, 1);
107
108 err = wait_for_init_b(mgr, 1, 1); /* min is 500 ns */
109 if (err) {
110 gpiod_set_value(conf->prog_b, 0);
111 return err;
112 }
113
114 gpiod_set_value(conf->prog_b, 0);
115
116 err = wait_for_init_b(mgr, 0, 0);
117 if (err)
118 return err;
119
120 if (get_done_gpio(mgr)) {
121 dev_err(&mgr->dev, "Unexpected DONE pin state...\n");
122 return -EIO;
123 }
124
125 /* program latency */
126 usleep_range(7500, 7600);
127 return 0;
128 }
129
xilinx_spi_write(struct fpga_manager * mgr,const char * buf,size_t count)130 static int xilinx_spi_write(struct fpga_manager *mgr, const char *buf,
131 size_t count)
132 {
133 struct xilinx_spi_conf *conf = mgr->priv;
134 const char *fw_data = buf;
135 const char *fw_data_end = fw_data + count;
136
137 while (fw_data < fw_data_end) {
138 size_t remaining, stride;
139 int ret;
140
141 remaining = fw_data_end - fw_data;
142 stride = min_t(size_t, remaining, SZ_4K);
143
144 ret = spi_write(conf->spi, fw_data, stride);
145 if (ret) {
146 dev_err(&mgr->dev, "SPI error in firmware write: %d\n",
147 ret);
148 return ret;
149 }
150 fw_data += stride;
151 }
152
153 return 0;
154 }
155
xilinx_spi_apply_cclk_cycles(struct xilinx_spi_conf * conf)156 static int xilinx_spi_apply_cclk_cycles(struct xilinx_spi_conf *conf)
157 {
158 struct spi_device *spi = conf->spi;
159 const u8 din_data[1] = { 0xff };
160 int ret;
161
162 ret = spi_write(conf->spi, din_data, sizeof(din_data));
163 if (ret)
164 dev_err(&spi->dev, "applying CCLK cycles failed: %d\n", ret);
165
166 return ret;
167 }
168
xilinx_spi_write_complete(struct fpga_manager * mgr,struct fpga_image_info * info)169 static int xilinx_spi_write_complete(struct fpga_manager *mgr,
170 struct fpga_image_info *info)
171 {
172 struct xilinx_spi_conf *conf = mgr->priv;
173 unsigned long timeout = jiffies + usecs_to_jiffies(info->config_complete_timeout_us);
174 bool expired = false;
175 int done;
176 int ret;
177
178 /*
179 * This loop is carefully written such that if the driver is
180 * scheduled out for more than 'timeout', we still check for DONE
181 * before giving up and we apply 8 extra CCLK cycles in all cases.
182 */
183 while (!expired) {
184 expired = time_after(jiffies, timeout);
185
186 done = get_done_gpio(mgr);
187 if (done < 0)
188 return done;
189
190 ret = xilinx_spi_apply_cclk_cycles(conf);
191 if (ret)
192 return ret;
193
194 if (done)
195 return 0;
196 }
197
198 if (conf->init_b) {
199 ret = gpiod_get_value(conf->init_b);
200
201 if (ret < 0) {
202 dev_err(&mgr->dev, "Error reading INIT_B (%d)\n", ret);
203 return ret;
204 }
205
206 dev_err(&mgr->dev,
207 ret ? "CRC error or invalid device\n"
208 : "Missing sync word or incomplete bitstream\n");
209 } else {
210 dev_err(&mgr->dev, "Timeout after config data transfer\n");
211 }
212
213 return -ETIMEDOUT;
214 }
215
216 static const struct fpga_manager_ops xilinx_spi_ops = {
217 .state = xilinx_spi_state,
218 .write_init = xilinx_spi_write_init,
219 .write = xilinx_spi_write,
220 .write_complete = xilinx_spi_write_complete,
221 };
222
xilinx_spi_probe(struct spi_device * spi)223 static int xilinx_spi_probe(struct spi_device *spi)
224 {
225 struct xilinx_spi_conf *conf;
226 struct fpga_manager *mgr;
227
228 conf = devm_kzalloc(&spi->dev, sizeof(*conf), GFP_KERNEL);
229 if (!conf)
230 return -ENOMEM;
231
232 conf->spi = spi;
233
234 /* PROGRAM_B is active low */
235 conf->prog_b = devm_gpiod_get(&spi->dev, "prog_b", GPIOD_OUT_LOW);
236 if (IS_ERR(conf->prog_b))
237 return dev_err_probe(&spi->dev, PTR_ERR(conf->prog_b),
238 "Failed to get PROGRAM_B gpio\n");
239
240 conf->init_b = devm_gpiod_get_optional(&spi->dev, "init-b", GPIOD_IN);
241 if (IS_ERR(conf->init_b))
242 return dev_err_probe(&spi->dev, PTR_ERR(conf->init_b),
243 "Failed to get INIT_B gpio\n");
244
245 conf->done = devm_gpiod_get(&spi->dev, "done", GPIOD_IN);
246 if (IS_ERR(conf->done))
247 return dev_err_probe(&spi->dev, PTR_ERR(conf->done),
248 "Failed to get DONE gpio\n");
249
250 mgr = devm_fpga_mgr_register(&spi->dev,
251 "Xilinx Slave Serial FPGA Manager",
252 &xilinx_spi_ops, conf);
253 return PTR_ERR_OR_ZERO(mgr);
254 }
255
256 #ifdef CONFIG_OF
257 static const struct of_device_id xlnx_spi_of_match[] = {
258 { .compatible = "xlnx,fpga-slave-serial", },
259 {}
260 };
261 MODULE_DEVICE_TABLE(of, xlnx_spi_of_match);
262 #endif
263
264 static struct spi_driver xilinx_slave_spi_driver = {
265 .driver = {
266 .name = "xlnx-slave-spi",
267 .of_match_table = of_match_ptr(xlnx_spi_of_match),
268 },
269 .probe = xilinx_spi_probe,
270 };
271
272 module_spi_driver(xilinx_slave_spi_driver)
273
274 MODULE_LICENSE("GPL v2");
275 MODULE_AUTHOR("Anatolij Gustschin <agust@denx.de>");
276 MODULE_DESCRIPTION("Load Xilinx FPGA firmware over SPI");
277