1 // SPDX-License-Identifier: GPL-2.0
2 
3 #include <linux/efi.h>
4 #include <asm/efi.h>
5 
6 #include "efistub.h"
7 
8 /**
9  * efi_low_alloc_above() - allocate pages at or above given address
10  * @size:	size of the memory area to allocate
11  * @align:	minimum alignment of the allocated memory area. It should
12  *		a power of two.
13  * @addr:	on exit the address of the allocated memory
14  * @min:	minimum address to used for the memory allocation
15  *
16  * Allocate at the lowest possible address that is not below @min as
17  * EFI_LOADER_DATA. The allocated pages are aligned according to @align but at
18  * least EFI_ALLOC_ALIGN. The first allocated page will not below the address
19  * given by @min.
20  *
21  * Return:	status code
22  */
efi_low_alloc_above(unsigned long size,unsigned long align,unsigned long * addr,unsigned long min)23 efi_status_t efi_low_alloc_above(unsigned long size, unsigned long align,
24 				 unsigned long *addr, unsigned long min)
25 {
26 	struct efi_boot_memmap *map;
27 	efi_status_t status;
28 	unsigned long nr_pages;
29 	int i;
30 
31 	status = efi_get_memory_map(&map, false);
32 	if (status != EFI_SUCCESS)
33 		goto fail;
34 
35 	/*
36 	 * Enforce minimum alignment that EFI or Linux requires when
37 	 * requesting a specific address.  We are doing page-based (or
38 	 * larger) allocations, and both the address and size must meet
39 	 * alignment constraints.
40 	 */
41 	if (align < EFI_ALLOC_ALIGN)
42 		align = EFI_ALLOC_ALIGN;
43 
44 	size = round_up(size, EFI_ALLOC_ALIGN);
45 	nr_pages = size / EFI_PAGE_SIZE;
46 	for (i = 0; i < map->map_size / map->desc_size; i++) {
47 		efi_memory_desc_t *desc;
48 		unsigned long m = (unsigned long)map->map;
49 		u64 start, end;
50 
51 		desc = efi_early_memdesc_ptr(m, map->desc_size, i);
52 
53 		if (desc->type != EFI_CONVENTIONAL_MEMORY)
54 			continue;
55 
56 		if (efi_soft_reserve_enabled() &&
57 		    (desc->attribute & EFI_MEMORY_SP))
58 			continue;
59 
60 		if (desc->num_pages < nr_pages)
61 			continue;
62 
63 		start = desc->phys_addr;
64 		end = start + desc->num_pages * EFI_PAGE_SIZE;
65 
66 		if (start < min)
67 			start = min;
68 
69 		start = round_up(start, align);
70 		if ((start + size) > end)
71 			continue;
72 
73 		status = efi_bs_call(allocate_pages, EFI_ALLOCATE_ADDRESS,
74 				     EFI_LOADER_DATA, nr_pages, &start);
75 		if (status == EFI_SUCCESS) {
76 			*addr = start;
77 			break;
78 		}
79 	}
80 
81 	if (i == map->map_size / map->desc_size)
82 		status = EFI_NOT_FOUND;
83 
84 	efi_bs_call(free_pool, map);
85 fail:
86 	return status;
87 }
88 
89 /**
90  * efi_relocate_kernel() - copy memory area
91  * @image_addr:		pointer to address of memory area to copy
92  * @image_size:		size of memory area to copy
93  * @alloc_size:		minimum size of memory to allocate, must be greater or
94  *			equal to image_size
95  * @preferred_addr:	preferred target address
96  * @alignment:		minimum alignment of the allocated memory area. It
97  *			should be a power of two.
98  * @min_addr:		minimum target address
99  *
100  * Copy a memory area to a newly allocated memory area aligned according
101  * to @alignment but at least EFI_ALLOC_ALIGN. If the preferred address
102  * is not available, the allocated address will not be below @min_addr.
103  * On exit, @image_addr is updated to the target copy address that was used.
104  *
105  * This function is used to copy the Linux kernel verbatim. It does not apply
106  * any relocation changes.
107  *
108  * Return:		status code
109  */
efi_relocate_kernel(unsigned long * image_addr,unsigned long image_size,unsigned long alloc_size,unsigned long preferred_addr,unsigned long alignment,unsigned long min_addr)110 efi_status_t efi_relocate_kernel(unsigned long *image_addr,
111 				 unsigned long image_size,
112 				 unsigned long alloc_size,
113 				 unsigned long preferred_addr,
114 				 unsigned long alignment,
115 				 unsigned long min_addr)
116 {
117 	unsigned long cur_image_addr;
118 	unsigned long new_addr = 0;
119 	efi_status_t status;
120 	unsigned long nr_pages;
121 	efi_physical_addr_t efi_addr = preferred_addr;
122 
123 	if (!image_addr || !image_size || !alloc_size)
124 		return EFI_INVALID_PARAMETER;
125 	if (alloc_size < image_size)
126 		return EFI_INVALID_PARAMETER;
127 
128 	cur_image_addr = *image_addr;
129 
130 	/*
131 	 * The EFI firmware loader could have placed the kernel image
132 	 * anywhere in memory, but the kernel has restrictions on the
133 	 * max physical address it can run at.  Some architectures
134 	 * also have a preferred address, so first try to relocate
135 	 * to the preferred address.  If that fails, allocate as low
136 	 * as possible while respecting the required alignment.
137 	 */
138 	nr_pages = round_up(alloc_size, EFI_ALLOC_ALIGN) / EFI_PAGE_SIZE;
139 	status = efi_bs_call(allocate_pages, EFI_ALLOCATE_ADDRESS,
140 			     EFI_LOADER_DATA, nr_pages, &efi_addr);
141 	new_addr = efi_addr;
142 	/*
143 	 * If preferred address allocation failed allocate as low as
144 	 * possible.
145 	 */
146 	if (status != EFI_SUCCESS) {
147 		status = efi_low_alloc_above(alloc_size, alignment, &new_addr,
148 					     min_addr);
149 	}
150 	if (status != EFI_SUCCESS) {
151 		efi_err("Failed to allocate usable memory for kernel.\n");
152 		return status;
153 	}
154 
155 	/*
156 	 * We know source/dest won't overlap since both memory ranges
157 	 * have been allocated by UEFI, so we can safely use memcpy.
158 	 */
159 	memcpy((void *)new_addr, (void *)cur_image_addr, image_size);
160 
161 	/* Return the new address of the relocated image. */
162 	*image_addr = new_addr;
163 
164 	return status;
165 }
166