xref: /openbmc/linux/drivers/clk/Kconfig (revision 8ec90bfd)
1# SPDX-License-Identifier: GPL-2.0
2
3config HAVE_CLK
4	bool
5	help
6	  The <linux/clk.h> calls support software clock gating and
7	  thus are a key power management tool on many systems.
8
9config CLKDEV_LOOKUP
10	bool
11	select HAVE_CLK
12
13config HAVE_CLK_PREPARE
14	bool
15
16config HAVE_LEGACY_CLK # TODO: Remove once all legacy users are migrated
17	bool
18	select HAVE_CLK
19	help
20	  Select this option when the clock API in <linux/clk.h> is implemented
21	  by platform/architecture code. This method is deprecated. Modern
22	  code should select COMMON_CLK instead and not define a custom
23	  'struct clk'.
24
25menuconfig COMMON_CLK
26	bool "Common Clock Framework"
27	depends on !HAVE_LEGACY_CLK
28	select HAVE_CLK_PREPARE
29	select CLKDEV_LOOKUP
30	select SRCU
31	select RATIONAL
32	help
33	  The common clock framework is a single definition of struct
34	  clk, useful across many platforms, as well as an
35	  implementation of the clock API in include/linux/clk.h.
36	  Architectures utilizing the common struct clk should select
37	  this option.
38
39if COMMON_CLK
40
41config COMMON_CLK_WM831X
42	tristate "Clock driver for WM831x/2x PMICs"
43	depends on MFD_WM831X
44	help
45	  Supports the clocking subsystem of the WM831x/2x series of
46	  PMICs from Wolfson Microelectronics.
47
48source "drivers/clk/versatile/Kconfig"
49
50config CLK_HSDK
51	bool "PLL Driver for HSDK platform"
52	depends on OF || COMPILE_TEST
53	depends on HAS_IOMEM
54	help
55	  This driver supports the HSDK core, system, ddr, tunnel and hdmi PLLs
56	  control.
57
58config COMMON_CLK_MAX77686
59	tristate "Clock driver for Maxim 77620/77686/77802 MFD"
60	depends on MFD_MAX77686 || MFD_MAX77620 || COMPILE_TEST
61	help
62	  This driver supports Maxim 77620/77686/77802 crystal oscillator
63	  clock.
64
65config COMMON_CLK_MAX9485
66	tristate "Maxim 9485 Programmable Clock Generator"
67	depends on I2C
68	help
69	  This driver supports Maxim 9485 Programmable Audio Clock Generator
70
71config COMMON_CLK_RK808
72	tristate "Clock driver for RK805/RK808/RK809/RK817/RK818"
73	depends on MFD_RK808
74	help
75	  This driver supports RK805, RK809 and RK817, RK808 and RK818 crystal oscillator clock.
76	  These multi-function devices have two fixed-rate oscillators, clocked at 32KHz each.
77	  Clkout1 is always on, Clkout2 can off by control register.
78
79config COMMON_CLK_HI655X
80	tristate "Clock driver for Hi655x" if EXPERT
81	depends on (MFD_HI655X_PMIC || COMPILE_TEST)
82	depends on REGMAP
83	default MFD_HI655X_PMIC
84	help
85	  This driver supports the hi655x PMIC clock. This
86	  multi-function device has one fixed-rate oscillator, clocked
87	  at 32KHz.
88
89config COMMON_CLK_SCMI
90	tristate "Clock driver controlled via SCMI interface"
91	depends on ARM_SCMI_PROTOCOL || COMPILE_TEST
92	help
93	  This driver provides support for clocks that are controlled
94	  by firmware that implements the SCMI interface.
95
96	  This driver uses SCMI Message Protocol to interact with the
97	  firmware providing all the clock controls.
98
99config COMMON_CLK_SCPI
100	tristate "Clock driver controlled via SCPI interface"
101	depends on ARM_SCPI_PROTOCOL || COMPILE_TEST
102	help
103	  This driver provides support for clocks that are controlled
104	  by firmware that implements the SCPI interface.
105
106	  This driver uses SCPI Message Protocol to interact with the
107	  firmware providing all the clock controls.
108
109config COMMON_CLK_SI5341
110	tristate "Clock driver for SiLabs 5341 and 5340 A/B/C/D devices"
111	depends on I2C
112	select REGMAP_I2C
113	help
114	  This driver supports Silicon Labs Si5341 and Si5340 programmable clock
115	  generators. Not all features of these chips are currently supported
116	  by the driver, in particular it only supports XTAL input. The chip can
117	  be pre-programmed to support other configurations and features not yet
118	  implemented in the driver.
119
120config COMMON_CLK_SI5351
121	tristate "Clock driver for SiLabs 5351A/B/C"
122	depends on I2C
123	select REGMAP_I2C
124	help
125	  This driver supports Silicon Labs 5351A/B/C programmable clock
126	  generators.
127
128config COMMON_CLK_SI514
129	tristate "Clock driver for SiLabs 514 devices"
130	depends on I2C
131	depends on OF
132	select REGMAP_I2C
133	help
134	  This driver supports the Silicon Labs 514 programmable clock
135	  generator.
136
137config COMMON_CLK_SI544
138	tristate "Clock driver for SiLabs 544 devices"
139	depends on I2C
140	select REGMAP_I2C
141	help
142	  This driver supports the Silicon Labs 544 programmable clock
143	  generator.
144
145config COMMON_CLK_SI570
146	tristate "Clock driver for SiLabs 570 and compatible devices"
147	depends on I2C
148	depends on OF
149	select REGMAP_I2C
150	help
151	  This driver supports Silicon Labs 570/571/598/599 programmable
152	  clock generators.
153
154config COMMON_CLK_BM1880
155	bool "Clock driver for Bitmain BM1880 SoC"
156	depends on ARCH_BITMAIN || COMPILE_TEST
157	default ARCH_BITMAIN
158	help
159	  This driver supports the clocks on Bitmain BM1880 SoC.
160
161config COMMON_CLK_CDCE706
162	tristate "Clock driver for TI CDCE706 clock synthesizer"
163	depends on I2C
164	select REGMAP_I2C
165	help
166	  This driver supports TI CDCE706 programmable 3-PLL clock synthesizer.
167
168config COMMON_CLK_CDCE925
169	tristate "Clock driver for TI CDCE913/925/937/949 devices"
170	depends on I2C
171	depends on OF
172	select REGMAP_I2C
173	help
174	  This driver supports the TI CDCE913/925/937/949 programmable clock
175	  synthesizer. Each chip has different number of PLLs and outputs.
176	  For example, the CDCE925 contains two PLLs with spread-spectrum
177	  clocking support and five output dividers. The driver only supports
178	  the following setup, and uses a fixed setting for the output muxes.
179	  Y1 is derived from the input clock
180	  Y2 and Y3 derive from PLL1
181	  Y4 and Y5 derive from PLL2
182	  Given a target output frequency, the driver will set the PLL and
183	  divider to best approximate the desired output.
184
185config COMMON_CLK_CS2000_CP
186	tristate "Clock driver for CS2000 Fractional-N Clock Synthesizer & Clock Multiplier"
187	depends on I2C
188	help
189	  If you say yes here you get support for the CS2000 clock multiplier.
190
191config COMMON_CLK_FSL_SAI
192	bool "Clock driver for BCLK of Freescale SAI cores"
193	depends on ARCH_LAYERSCAPE || COMPILE_TEST
194	help
195	  This driver supports the Freescale SAI (Synchronous Audio Interface)
196	  to be used as a generic clock output. Some SoCs have restrictions
197	  regarding the possible pin multiplexer settings. Eg. on some SoCs
198	  two SAI interfaces can only be enabled together. If just one is
199	  needed, the BCLK pin of the second one can be used as general
200	  purpose clock output. Ideally, it can be used to drive an audio
201	  codec (sometimes known as MCLK).
202
203config COMMON_CLK_GEMINI
204	bool "Clock driver for Cortina Systems Gemini SoC"
205	depends on ARCH_GEMINI || COMPILE_TEST
206	select MFD_SYSCON
207	select RESET_CONTROLLER
208	help
209	  This driver supports the SoC clocks on the Cortina Systems Gemini
210	  platform, also known as SL3516 or CS3516.
211
212config COMMON_CLK_ASPEED
213	bool "Clock driver for Aspeed BMC SoCs"
214	depends on ARCH_ASPEED || COMPILE_TEST
215	default ARCH_ASPEED
216	select MFD_SYSCON
217	select RESET_CONTROLLER
218	help
219	  This driver supports the SoC clocks on the Aspeed BMC platforms.
220
221	  The G4 and G5 series, including the ast2400 and ast2500, are supported
222	  by this driver.
223
224config COMMON_CLK_S2MPS11
225	tristate "Clock driver for S2MPS1X/S5M8767 MFD"
226	depends on MFD_SEC_CORE || COMPILE_TEST
227	help
228	  This driver supports S2MPS11/S2MPS14/S5M8767 crystal oscillator
229	  clock. These multi-function devices have two (S2MPS14) or three
230	  (S2MPS11, S5M8767) fixed-rate oscillators, clocked at 32KHz each.
231
232config CLK_TWL6040
233	tristate "External McPDM functional clock from twl6040"
234	depends on TWL6040_CORE
235	help
236	  Enable the external functional clock support on OMAP4+ platforms for
237	  McPDM. McPDM module is using the external bit clock on the McPDM bus
238	  as functional clock.
239
240config COMMON_CLK_AXI_CLKGEN
241	tristate "AXI clkgen driver"
242	depends on ARCH_ZYNQ || MICROBLAZE || COMPILE_TEST
243	help
244	  Support for the Analog Devices axi-clkgen pcore clock generator for Xilinx
245	  FPGAs. It is commonly used in Analog Devices' reference designs.
246
247config CLK_QORIQ
248	bool "Clock driver for Freescale QorIQ platforms"
249	depends on (PPC_E500MC || ARM || ARM64 || COMPILE_TEST) && OF
250	help
251	  This adds the clock driver support for Freescale QorIQ platforms
252	  using common clock framework.
253
254config CLK_LS1028A_PLLDIG
255        tristate "Clock driver for LS1028A Display output"
256        depends on ARCH_LAYERSCAPE || COMPILE_TEST
257        default ARCH_LAYERSCAPE
258        help
259          This driver support the Display output interfaces(LCD, DPHY) pixel clocks
260          of the QorIQ Layerscape LS1028A, as implemented TSMC CLN28HPM PLL. Not all
261          features of the PLL are currently supported by the driver. By default,
262          configured bypass mode with this PLL.
263
264config COMMON_CLK_XGENE
265	bool "Clock driver for APM XGene SoC"
266	default ARCH_XGENE
267	depends on ARM64 || COMPILE_TEST
268	help
269	  Support for the APM X-Gene SoC reference, PLL, and device clocks.
270
271config COMMON_CLK_LOCHNAGAR
272	tristate "Cirrus Logic Lochnagar clock driver"
273	depends on MFD_LOCHNAGAR
274	help
275	  This driver supports the clocking features of the Cirrus Logic
276	  Lochnagar audio development board.
277
278config COMMON_CLK_NXP
279	def_bool COMMON_CLK && (ARCH_LPC18XX || ARCH_LPC32XX)
280	select REGMAP_MMIO if ARCH_LPC32XX
281	select MFD_SYSCON if ARCH_LPC18XX
282	help
283	  Support for clock providers on NXP platforms.
284
285config COMMON_CLK_PALMAS
286	tristate "Clock driver for TI Palmas devices"
287	depends on MFD_PALMAS
288	help
289	  This driver supports TI Palmas devices 32KHz output KG and KG_AUDIO
290	  using common clock framework.
291
292config COMMON_CLK_PWM
293	tristate "Clock driver for PWMs used as clock outputs"
294	depends on PWM
295	help
296	  Adapter driver so that any PWM output can be (mis)used as clock signal
297	  at 50% duty cycle.
298
299config COMMON_CLK_PXA
300	def_bool COMMON_CLK && ARCH_PXA
301	help
302	  Support for the Marvell PXA SoC.
303
304config COMMON_CLK_PIC32
305	def_bool COMMON_CLK && MACH_PIC32
306
307config COMMON_CLK_OXNAS
308	bool "Clock driver for the OXNAS SoC Family"
309	depends on ARCH_OXNAS || COMPILE_TEST
310	select MFD_SYSCON
311	help
312	  Support for the OXNAS SoC Family clocks.
313
314config COMMON_CLK_VC5
315	tristate "Clock driver for IDT VersaClock 5,6 devices"
316	depends on I2C
317	depends on OF
318	select REGMAP_I2C
319	help
320	  This driver supports the IDT VersaClock 5 and VersaClock 6
321	  programmable clock generators.
322
323config COMMON_CLK_STM32MP157
324	def_bool COMMON_CLK && MACH_STM32MP157
325	help
326	  Support for stm32mp157 SoC family clocks
327
328config COMMON_CLK_STM32F
329	def_bool COMMON_CLK && (MACH_STM32F429 || MACH_STM32F469 || MACH_STM32F746)
330	help
331	  Support for stm32f4 and stm32f7 SoC families clocks
332
333config COMMON_CLK_STM32H7
334	def_bool COMMON_CLK && MACH_STM32H743
335	help
336	  Support for stm32h7 SoC family clocks
337
338config COMMON_CLK_MMP2
339	def_bool COMMON_CLK && (MACH_MMP2_DT || MACH_MMP3_DT)
340	help
341	  Support for Marvell MMP2 and MMP3 SoC clocks
342
343config COMMON_CLK_MMP2_AUDIO
344        tristate "Clock driver for MMP2 Audio subsystem"
345        depends on COMMON_CLK_MMP2 || COMPILE_TEST
346        help
347          This driver supports clocks for Audio subsystem on MMP2 SoC.
348
349config COMMON_CLK_BD718XX
350	tristate "Clock driver for 32K clk gates on ROHM PMICs"
351	depends on MFD_ROHM_BD718XX || MFD_ROHM_BD70528 || MFD_ROHM_BD71828
352	help
353	  This driver supports ROHM BD71837, ROHM BD71847, ROHM BD71828 and
354	  ROHM BD70528 PMICs clock gates.
355
356config COMMON_CLK_FIXED_MMIO
357	bool "Clock driver for Memory Mapped Fixed values"
358	depends on COMMON_CLK && OF
359	help
360	  Support for Memory Mapped IO Fixed clocks
361
362source "drivers/clk/actions/Kconfig"
363source "drivers/clk/analogbits/Kconfig"
364source "drivers/clk/baikal-t1/Kconfig"
365source "drivers/clk/bcm/Kconfig"
366source "drivers/clk/hisilicon/Kconfig"
367source "drivers/clk/imgtec/Kconfig"
368source "drivers/clk/imx/Kconfig"
369source "drivers/clk/ingenic/Kconfig"
370source "drivers/clk/keystone/Kconfig"
371source "drivers/clk/mediatek/Kconfig"
372source "drivers/clk/meson/Kconfig"
373source "drivers/clk/mvebu/Kconfig"
374source "drivers/clk/qcom/Kconfig"
375source "drivers/clk/renesas/Kconfig"
376source "drivers/clk/samsung/Kconfig"
377source "drivers/clk/sifive/Kconfig"
378source "drivers/clk/sprd/Kconfig"
379source "drivers/clk/sunxi/Kconfig"
380source "drivers/clk/sunxi-ng/Kconfig"
381source "drivers/clk/tegra/Kconfig"
382source "drivers/clk/ti/Kconfig"
383source "drivers/clk/uniphier/Kconfig"
384source "drivers/clk/x86/Kconfig"
385source "drivers/clk/zynqmp/Kconfig"
386
387endif
388