1 2config CLKDEV_LOOKUP 3 bool 4 select HAVE_CLK 5 6config HAVE_CLK_PREPARE 7 bool 8 9config COMMON_CLK 10 bool 11 select HAVE_CLK_PREPARE 12 select CLKDEV_LOOKUP 13 select SRCU 14 select RATIONAL 15 ---help--- 16 The common clock framework is a single definition of struct 17 clk, useful across many platforms, as well as an 18 implementation of the clock API in include/linux/clk.h. 19 Architectures utilizing the common struct clk should select 20 this option. 21 22menu "Common Clock Framework" 23 depends on COMMON_CLK 24 25config COMMON_CLK_WM831X 26 tristate "Clock driver for WM831x/2x PMICs" 27 depends on MFD_WM831X 28 ---help--- 29 Supports the clocking subsystem of the WM831x/2x series of 30 PMICs from Wolfson Microelectronics. 31 32source "drivers/clk/versatile/Kconfig" 33 34config CLK_HSDK 35 bool "PLL Driver for HSDK platform" 36 depends on OF || COMPILE_TEST 37 ---help--- 38 This driver supports the HSDK core, system, ddr, tunnel and hdmi PLLs 39 control. 40 41config COMMON_CLK_MAX77686 42 tristate "Clock driver for Maxim 77620/77686/77802 MFD" 43 depends on MFD_MAX77686 || MFD_MAX77620 || COMPILE_TEST 44 ---help--- 45 This driver supports Maxim 77620/77686/77802 crystal oscillator 46 clock. 47 48config COMMON_CLK_RK808 49 tristate "Clock driver for RK805/RK808/RK818" 50 depends on MFD_RK808 51 ---help--- 52 This driver supports RK805, RK808 and RK818 crystal oscillator clock. These 53 multi-function devices have two fixed-rate oscillators, 54 clocked at 32KHz each. Clkout1 is always on, Clkout2 can off 55 by control register. 56 57config COMMON_CLK_HI655X 58 tristate "Clock driver for Hi655x" 59 depends on MFD_HI655X_PMIC || COMPILE_TEST 60 ---help--- 61 This driver supports the hi655x PMIC clock. This 62 multi-function device has one fixed-rate oscillator, clocked 63 at 32KHz. 64 65config COMMON_CLK_SCPI 66 tristate "Clock driver controlled via SCPI interface" 67 depends on ARM_SCPI_PROTOCOL || COMPILE_TEST 68 ---help--- 69 This driver provides support for clocks that are controlled 70 by firmware that implements the SCPI interface. 71 72 This driver uses SCPI Message Protocol to interact with the 73 firmware providing all the clock controls. 74 75config COMMON_CLK_SI5351 76 tristate "Clock driver for SiLabs 5351A/B/C" 77 depends on I2C 78 select REGMAP_I2C 79 select RATIONAL 80 ---help--- 81 This driver supports Silicon Labs 5351A/B/C programmable clock 82 generators. 83 84config COMMON_CLK_SI514 85 tristate "Clock driver for SiLabs 514 devices" 86 depends on I2C 87 depends on OF 88 select REGMAP_I2C 89 help 90 ---help--- 91 This driver supports the Silicon Labs 514 programmable clock 92 generator. 93 94config COMMON_CLK_SI570 95 tristate "Clock driver for SiLabs 570 and compatible devices" 96 depends on I2C 97 depends on OF 98 select REGMAP_I2C 99 help 100 ---help--- 101 This driver supports Silicon Labs 570/571/598/599 programmable 102 clock generators. 103 104config COMMON_CLK_CDCE706 105 tristate "Clock driver for TI CDCE706 clock synthesizer" 106 depends on I2C 107 select REGMAP_I2C 108 select RATIONAL 109 ---help--- 110 This driver supports TI CDCE706 programmable 3-PLL clock synthesizer. 111 112config COMMON_CLK_CDCE925 113 tristate "Clock driver for TI CDCE913/925/937/949 devices" 114 depends on I2C 115 depends on OF 116 select REGMAP_I2C 117 help 118 ---help--- 119 This driver supports the TI CDCE913/925/937/949 programmable clock 120 synthesizer. Each chip has different number of PLLs and outputs. 121 For example, the CDCE925 contains two PLLs with spread-spectrum 122 clocking support and five output dividers. The driver only supports 123 the following setup, and uses a fixed setting for the output muxes. 124 Y1 is derived from the input clock 125 Y2 and Y3 derive from PLL1 126 Y4 and Y5 derive from PLL2 127 Given a target output frequency, the driver will set the PLL and 128 divider to best approximate the desired output. 129 130config COMMON_CLK_CS2000_CP 131 tristate "Clock driver for CS2000 Fractional-N Clock Synthesizer & Clock Multiplier" 132 depends on I2C 133 help 134 If you say yes here you get support for the CS2000 clock multiplier. 135 136config COMMON_CLK_GEMINI 137 bool "Clock driver for Cortina Systems Gemini SoC" 138 depends on ARCH_GEMINI || COMPILE_TEST 139 select MFD_SYSCON 140 select RESET_CONTROLLER 141 ---help--- 142 This driver supports the SoC clocks on the Cortina Systems Gemini 143 platform, also known as SL3516 or CS3516. 144 145config COMMON_CLK_S2MPS11 146 tristate "Clock driver for S2MPS1X/S5M8767 MFD" 147 depends on MFD_SEC_CORE || COMPILE_TEST 148 ---help--- 149 This driver supports S2MPS11/S2MPS14/S5M8767 crystal oscillator 150 clock. These multi-function devices have two (S2MPS14) or three 151 (S2MPS11, S5M8767) fixed-rate oscillators, clocked at 32KHz each. 152 153config CLK_TWL6040 154 tristate "External McPDM functional clock from twl6040" 155 depends on TWL6040_CORE 156 ---help--- 157 Enable the external functional clock support on OMAP4+ platforms for 158 McPDM. McPDM module is using the external bit clock on the McPDM bus 159 as functional clock. 160 161config COMMON_CLK_AXI_CLKGEN 162 tristate "AXI clkgen driver" 163 depends on ARCH_ZYNQ || MICROBLAZE || COMPILE_TEST 164 help 165 ---help--- 166 Support for the Analog Devices axi-clkgen pcore clock generator for Xilinx 167 FPGAs. It is commonly used in Analog Devices' reference designs. 168 169config CLK_QORIQ 170 bool "Clock driver for Freescale QorIQ platforms" 171 depends on (PPC_E500MC || ARM || ARM64 || COMPILE_TEST) && OF 172 ---help--- 173 This adds the clock driver support for Freescale QorIQ platforms 174 using common clock framework. 175 176config COMMON_CLK_XGENE 177 bool "Clock driver for APM XGene SoC" 178 default y 179 depends on ARM64 || COMPILE_TEST 180 ---help--- 181 Sypport for the APM X-Gene SoC reference, PLL, and device clocks. 182 183config COMMON_CLK_NXP 184 def_bool COMMON_CLK && (ARCH_LPC18XX || ARCH_LPC32XX) 185 select REGMAP_MMIO if ARCH_LPC32XX 186 select MFD_SYSCON if ARCH_LPC18XX 187 ---help--- 188 Support for clock providers on NXP platforms. 189 190config COMMON_CLK_PALMAS 191 tristate "Clock driver for TI Palmas devices" 192 depends on MFD_PALMAS 193 ---help--- 194 This driver supports TI Palmas devices 32KHz output KG and KG_AUDIO 195 using common clock framework. 196 197config COMMON_CLK_PWM 198 tristate "Clock driver for PWMs used as clock outputs" 199 depends on PWM 200 ---help--- 201 Adapter driver so that any PWM output can be (mis)used as clock signal 202 at 50% duty cycle. 203 204config COMMON_CLK_PXA 205 def_bool COMMON_CLK && ARCH_PXA 206 ---help--- 207 Support for the Marvell PXA SoC. 208 209config COMMON_CLK_PIC32 210 def_bool COMMON_CLK && MACH_PIC32 211 212config COMMON_CLK_OXNAS 213 bool "Clock driver for the OXNAS SoC Family" 214 depends on ARCH_OXNAS || COMPILE_TEST 215 select MFD_SYSCON 216 ---help--- 217 Support for the OXNAS SoC Family clocks. 218 219config COMMON_CLK_VC5 220 tristate "Clock driver for IDT VersaClock 5,6 devices" 221 depends on I2C 222 depends on OF 223 select REGMAP_I2C 224 help 225 ---help--- 226 This driver supports the IDT VersaClock 5 and VersaClock 6 227 programmable clock generators. 228 229source "drivers/clk/bcm/Kconfig" 230source "drivers/clk/hisilicon/Kconfig" 231source "drivers/clk/imgtec/Kconfig" 232source "drivers/clk/keystone/Kconfig" 233source "drivers/clk/mediatek/Kconfig" 234source "drivers/clk/meson/Kconfig" 235source "drivers/clk/mvebu/Kconfig" 236source "drivers/clk/qcom/Kconfig" 237source "drivers/clk/renesas/Kconfig" 238source "drivers/clk/samsung/Kconfig" 239source "drivers/clk/sunxi-ng/Kconfig" 240source "drivers/clk/tegra/Kconfig" 241source "drivers/clk/ti/Kconfig" 242source "drivers/clk/uniphier/Kconfig" 243 244endmenu 245