1# 2# Bus Devices 3# 4 5menu "Bus devices" 6 7config ARM_CCI 8 bool 9 10config ARM_CCI_PMU 11 bool 12 select ARM_CCI 13 14config ARM_CCI400_COMMON 15 bool 16 select ARM_CCI 17 18config ARM_CCI400_PMU 19 bool "ARM CCI400 PMU support" 20 depends on (ARM && CPU_V7) || ARM64 21 depends on PERF_EVENTS 22 select ARM_CCI400_COMMON 23 select ARM_CCI_PMU 24 help 25 Support for PMU events monitoring on the ARM CCI-400 (cache coherent 26 interconnect). CCI-400 supports counting events related to the 27 connected slave/master interfaces. 28 29config ARM_CCI400_PORT_CTRL 30 bool 31 depends on ARM && OF && CPU_V7 32 select ARM_CCI400_COMMON 33 help 34 Low level power management driver for CCI400 cache coherent 35 interconnect for ARM platforms. 36 37config ARM_CCI5xx_PMU 38 bool "ARM CCI-500/CCI-550 PMU support" 39 depends on (ARM && CPU_V7) || ARM64 40 depends on PERF_EVENTS 41 select ARM_CCI_PMU 42 help 43 Support for PMU events monitoring on the ARM CCI-500/CCI-550 cache 44 coherent interconnects. Both of them provide 8 independent event counters, 45 which can count events pertaining to the slave/master interfaces as well 46 as the internal events to the CCI. 47 48 If unsure, say Y 49 50config ARM_CCN 51 tristate "ARM CCN driver support" 52 depends on ARM || ARM64 53 depends on PERF_EVENTS 54 help 55 PMU (perf) driver supporting the ARM CCN (Cache Coherent Network) 56 interconnect. 57 58config BRCMSTB_GISB_ARB 59 bool "Broadcom STB GISB bus arbiter" 60 depends on ARM || ARM64 || MIPS 61 default ARCH_BRCMSTB || BMIPS_GENERIC 62 help 63 Driver for the Broadcom Set Top Box System-on-a-chip internal bus 64 arbiter. This driver provides timeout and target abort error handling 65 and internal bus master decoding. 66 67config IMX_WEIM 68 bool "Freescale EIM DRIVER" 69 depends on ARCH_MXC 70 help 71 Driver for i.MX WEIM controller. 72 The WEIM(Wireless External Interface Module) works like a bus. 73 You can attach many different devices on it, such as NOR, onenand. 74 75config MIPS_CDMM 76 bool "MIPS Common Device Memory Map (CDMM) Driver" 77 depends on CPU_MIPSR2 78 help 79 Driver needed for the MIPS Common Device Memory Map bus in MIPS 80 cores. This bus is for per-CPU tightly coupled devices such as the 81 Fast Debug Channel (FDC). 82 83 For this to work, either your bootloader needs to enable the CDMM 84 region at an unused physical address on the boot CPU, or else your 85 platform code needs to implement mips_cdmm_phys_base() (see 86 asm/cdmm.h). 87 88config MVEBU_MBUS 89 bool 90 depends on PLAT_ORION 91 help 92 Driver needed for the MBus configuration on Marvell EBU SoCs 93 (Kirkwood, Dove, Orion5x, MV78XX0 and Armada 370/XP). 94 95config OMAP_INTERCONNECT 96 tristate "OMAP INTERCONNECT DRIVER" 97 depends on ARCH_OMAP2PLUS 98 99 help 100 Driver to enable OMAP interconnect error handling driver. 101 102config OMAP_OCP2SCP 103 tristate "OMAP OCP2SCP DRIVER" 104 depends on ARCH_OMAP2PLUS 105 help 106 Driver to enable ocp2scp module which transforms ocp interface 107 protocol to scp protocol. In OMAP4, USB PHY is connected via 108 OCP2SCP and in OMAP5, both USB PHY and SATA PHY is connected via 109 OCP2SCP. 110 111config QCOM_EBI2 112 bool "Qualcomm External Bus Interface 2 (EBI2)" 113 depends on HAS_IOMEM 114 depends on ARCH_QCOM || COMPILE_TEST 115 default ARCH_QCOM 116 help 117 Say y here to enable support for the Qualcomm External Bus 118 Interface 2, which can be used to connect things like NAND Flash, 119 SRAM, ethernet adapters, FPGAs and LCD displays. 120 121config SIMPLE_PM_BUS 122 bool "Simple Power-Managed Bus Driver" 123 depends on OF && PM 124 help 125 Driver for transparent busses that don't need a real driver, but 126 where the bus controller is part of a PM domain, or under the control 127 of a functional clock, and thus relies on runtime PM for managing 128 this PM domain and/or clock. 129 An example of such a bus controller is the Renesas Bus State 130 Controller (BSC, sometimes called "LBSC within Bus Bridge", or 131 "External Bus Interface") as found on several Renesas ARM SoCs. 132 133config SUNXI_RSB 134 tristate "Allwinner sunXi Reduced Serial Bus Driver" 135 default MACH_SUN8I || MACH_SUN9I || ARM64 136 depends on ARCH_SUNXI 137 select REGMAP 138 help 139 Say y here to enable support for Allwinner's Reduced Serial Bus 140 (RSB) support. This controller is responsible for communicating 141 with various RSB based devices, such as AXP223, AXP8XX PMICs, 142 and AC100/AC200 ICs. 143 144config TEGRA_ACONNECT 145 tristate "Tegra ACONNECT Bus Driver" 146 depends on ARCH_TEGRA_210_SOC 147 depends on OF && PM 148 select PM_CLK 149 help 150 Driver for the Tegra ACONNECT bus which is used to interface with 151 the devices inside the Audio Processing Engine (APE) for Tegra210. 152 153config TEGRA_GMI 154 tristate "Tegra Generic Memory Interface bus driver" 155 depends on ARCH_TEGRA 156 help 157 Driver for the Tegra Generic Memory Interface bus which can be used 158 to attach devices such as NOR, UART, FPGA and more. 159 160config UNIPHIER_SYSTEM_BUS 161 tristate "UniPhier System Bus driver" 162 depends on ARCH_UNIPHIER && OF 163 default y 164 help 165 Support for UniPhier System Bus, a simple external bus. This is 166 needed to use on-board devices connected to UniPhier SoCs. 167 168config VEXPRESS_CONFIG 169 bool "Versatile Express configuration bus" 170 default y if ARCH_VEXPRESS 171 depends on ARM || ARM64 172 depends on OF 173 select REGMAP 174 help 175 Platform configuration infrastructure for the ARM Ltd. 176 Versatile Express. 177 178config DA8XX_MSTPRI 179 bool "TI da8xx master peripheral priority driver" 180 depends on ARCH_DAVINCI_DA8XX 181 help 182 Driver for Texas Instruments da8xx master peripheral priority 183 configuration. Allows to adjust the priorities of all master 184 peripherals. 185 186endmenu 187